Search Results

Search found 32130 results on 1286 pages for 'local search'.

Page 278/1286 | < Previous Page | 274 275 276 277 278 279 280 281 282 283 284 285  | Next Page >

  • Setting up shared connection

    - by Calvin Froedge
    I have a network that is connected to the internet via a switch connected to a router. I have it setup like this so I can work on the new network without causing problems on the old. Anyway, I'm trying to enable internet connection sharing. Internet comes to server like this: Modem - Router - Switch - Ubuntu 11.10 (Eth0) I want to share the connection through Eth1 (Eth1 - Managed Switch - Clients). Here is my config for /etc/network/interfaces: I have a DHCP server running on Eth1. Here is my config: ddns-update-style none; option domain-name "myserver.local"; option domain-name-servers 192.168.1.2, 8.8.8.8; default-lease-time 600; max-lease-time 7200; authoritative; subnet 192.168.1.0 netmask 255.255.255.0 { interface eth1; range 192.168.1.3 192.168.1.254; option routers 192.168.1.1; option subnet-mask 255.255.255.0; option broadcast-address 192.168.1.255; } Here is /etc/network/interfaces: # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet dhcp #Used for internal network auto eth1 iface eth1 inet static address 192.168.1.2 netmask 255.255.255.0 broadcast 192.168.1.255 network 192.168.1.0 Here is /etc/hosts: 127.0.0.1 localhost 127.0.1.1 myserver.isp.com server 192.168.1.2 server.myserver.local server myserver.local In /etc/sysctl.conf, I've set the following: net.ipv4.ip_forward=1 Finally, in /etc/rc.local, I've set the following: /sbin/iptables -P FORWARD ACCEPT /sbin/iptables --table nat -A POSTROUTING -o eth1 -j MASQUERADE When I ping 8.8.8.8 (google's DNS) from a client that is authenticated with my DHCP server (they have been assigned a local ip, like 192.168.1.10), I get a timeout. How can I debug this further to figure out where my problem is?

    Read the article

  • How to reset .bashrc file which edited before to set PATH ANDROID sdk

    - by revan
    bash: export: `/home/entw/bin:/usr/lib/lightdm/lightdm:/usr/local/sbin:/usr/local /bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/bin': not a valid identifier bash: /home/entw/.bashrc: line 111: unexpected EOF while looking for matching `"' bash: /home/entw/.bashrc: line 112: syntax error: unexpected end of file entw@entwine-desktop:~$ This is the error i frequently getting in terminal, shows when opend termianl. The following commands i applied in terminal, sudo gedit $HOME/.bashrc and added some path varable like android SDK, and run the following command source ~/.bashrc got the error in terminal bash: export: `/home/entw/bin:/usr/lib/lightdm/lightdm:/usr/local/sbin:/usr/local /bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/bin': not a valid identifier bash: /home/entw/.bashrc: line 111: unexpected EOF while looking for matching `"' bash: /home/entw/.bashrc: line 112: syntax error: unexpected end of file entw@entwine-desktop:~$ but if i try to open agin that file shows the error file or directory not found. what do i do to set all correct ??, please any help? This forum i tried [forum]: http://forum.xda-developers.com/showthread.php?t=919425 "--point 2"

    Read the article

  • Pythonika installation error on ubuntu 12

    - by user1426913
    I have been following links: to install pythonika on ubuntu: How to install Pythonika on Ubuntu? I get error: $ sudo make -f Makefile.linux cc -c Pythonika.c -I/usr/local/Wolfram/Mathematica/9.0/SystemFiles/Links/MathLink/DeveloperKit/Linux/CompilerAdditions -I/usr/include/python2.7/ Pythonika.c: In function ‘PyUnicodeString’: Pythonika.c:109:5: warning: passing argument 1 of ‘PyUnicodeUCS4_FromUnicode’ from incompatible pointer type [enabled by default] /usr/include/python2.7/unicodeobject.h:464:23: note: expected ‘const Py_UNICODE *’ but argument is of type ‘short unsigned int *’ Pythonika.c: In function ‘python_to_mathematica_object’: Pythonika.c:411:13: warning: passing argument 2 of ‘MLPutUnicodeString’ from incompatible pointer type [enabled by default] /usr/local/Wolfram/Mathematica/9.0/SystemFiles/Links/MathLink/DeveloperKit/Linux/CompilerAdditions/mathlink.h:4299:1: note: expected ‘const short unsigned int *’ but argument is of type ‘Py_UNICODE ’ "/usr/local/Wolfram/Mathematica/9.0/SystemFiles/Links/MathLink/DeveloperKit/Linux/CompilerAdditions/mprep" Pythonika.tm -o Pythonikatm.c /bin/sh: 1: /usr/local/Wolfram/Mathematica/9.0/SystemFiles/Links/MathLink/DeveloperKit/Linux/CompilerAdditions/mprep: not found make: ** [Pythonikatm.o] Error 127

    Read the article

  • Duplicating someone's content legitimately & writing HTML to support that

    - by Codecraft
    I want to add content from other blogs to my own (with the authors permission) to help build additional relevant content and support articles I've found useful that others have written. I'm looking into how to do this responsibly - ie, by giving the original content author a boost and not competing against them for search traffic which should go to their site. In order to keep my duplicate content out of search, and to hint to the search engines where the original content is to be found i've implemented: <head> <meta name='robots' content='noindex, follow'> <link rel='canonical' href='http://www.originalblog.com/original-post.html' /> </head> Additionally, to boost the original article and to let readers know where it came from i'll be adding something like this: <div> Article originally written by <a href='http://www.authorswebsite.com'>Authors Name</a> and reproduced with permission.<br/> <a href='http://www.originalblog.com/original-post.html' target='new'> Read the original article here. </a> </div> All that remains is a way to 'officially' credit the original author in the HTML for the search spiders to see. Can anyone tell me a way to do this possibly using rel="author" (as far as I can see thats only good for my own original content), or perhaps it doesn't matter given that the reproduced pages will be kept out of search engines? Also, have I overlooked anything in the approach?

    Read the article

  • objectClass in openldap.

    - by garden air
    I am working on openldap in my linux box (centos) as testing.I create a base file to discuss with you about objectClass functionality & its impact if we not write.I write objectClass two times i.e top and domain .What does it mean ? The 2nd one is drived from the firect objectClass like parents child relation ? [root@srv1 openldap]# vim base.ldif base.ldif dn: dc=test,dc=local dc: test objectClass: top objectClass: domain Now I create add two OUs and does not add objectClass:top in both sales and marketing. To add two OUs i.e Sales and Marketing dn: ou=Sales,dc=test,dc=local ou: Sales objectClass:organizationalUnit dn: ou=Marketing,dc=test,dc=local ou: Marketing objectClass: organizationalUnit The confusion is should use all the parent objectClass and chield objectClass ? If we not add what impact will be on the structure ? In the following I use objectClass top and organizationalunit dn: ou=Sales,dc=test,dc=local ou: Sales objectClass: top objectClass:organizationalUnit dn: ou=Marketing,dc=test,dc=local ou: Marketing objectClass: top objectClass: organizationalUnit Please guide me which one is correct ? thanks garden

    Read the article

  • Enabling Code Coverage in Visual Studio 2010

    - by Anthony Trudeau
    You'll quickly find out that enabling code coverage in Visual Studio 2010 has changed.  With the new version you enable this functionality through the test settings.  The following steps will enable code coverage: Open the local.testsettings which you can access from Test -> Edit Test Settings -> Local (local.testsettings) Select Data and Diagnostics from the list Select the Enabled checkbox on the Code Coverage row Double-click the Code Coverage row Select the assemblies you want to instrument Specify a re-signing key file if your assemblies are strong-named Click OK Click Apply Click Close

    Read the article

  • How do I get Google to crawl my content when it's only displayed when you fill in a form?

    - by Sarang Patil
    I have a webpage. It has a form and the "results" section is blank. When the user searches for items, and a list that pops up, he/she chooses one option from list and then the corresponding results are displayed in results section. I once decided to log every ip,url of person with time that visits my page. One ip was 66.249.73.26, and on doing google search I came to know it is ip of google bot. link for whatmyipaddress google bot Now when I searched for the links that this ip visited, it was like this: search?id=100 search?id=110 ... search?id=200 ... then afterwards it incremented in steps of 1, like 400,401.. But people search for strings and not numbers. And because googlebot searches for numbers like this, I think the corresponding content is never displayed and so my page content is never indexed, even though it has rich content. So I want to ask you is that in order to show google bot all the content that the webpage has, should I list all the results in index page and ask users to enter string to filter results?

    Read the article

  • Some Keyword Optimization Tips For Your Work From Home

    Part of search engine optimization or SEO is keyword optimization. We optimize our keywords for our website because these words or phrases are the ones that will link us to our customers or target audience. By typing these keywords in the search box of popular search engines, customers are able to find us, our website and of course, our business or work from home.

    Read the article

  • Crontab -e gives me error messages

    - by DNA
    I get a bunch of error messages when I run crontab -e Here are the error messages. And here is my crontab file under `/usr/bin/': # /etc/crontab: system-wide crontab # Unlike any other crontab you don't have to run the `crontab' # command to install the new version when you edit this file # and files in /etc/cron.d. These files also have username fields, # that none of the other crontabs do. SHELL=/bin/sh PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin # m h dom mon dow user command 17 * * * * root cd / && run-parts --report /etc/cron.hourly 25 6 * * * root test -x /usr/sbin/anacron || ( cd / && run-parts --report /etc/cron.daily ) 47 6 * * 7 root test -x /usr/sbin/anacron || ( cd / && run-parts --report /etc/cron.weekly ) 52 6 1 * * root test -x /usr/sbin/anacron || ( cd / && run-parts --report /etc/cron.monthly ) 30 * * * * root rsync /home/dnaneet/Downloads/*.pdf /home/dnaneet/Downloads/pdfs/ # I notice that the last task ('rsync') NEVER RUNS! Why is this happening? What did I do wrong? Running Ubuntu 11.10/Bash. I have read this... Am I missing a shebang? And I don't know if my anacron jobs run. Edit 1 In light of Masi's comment, I commented out lines 17 thru 25 of my crontab file with #. Now when I run sudo crontab -e, all I get is: /usr/bin/crontab: 11: 17: not found /usr/bin/crontab: 12: 25: not found (gedit:4301): Gtk-WARNING **: Attempting to store changes into `/root/.local/share/recently-used.xbel', but failed: Failed to create file '/root/.local/share/recently-used.xbel.GOHVBW': No such file or directory (gedit:4301): Gtk-WARNING **: Attempting to set the permissions of `/root/.local/share/recently-used.xbel', but failed: No such file or directory What in the world?

    Read the article

  • How does the Keyword Order in the domain name effects SEO?

    - by Sushil
    From the Google keyword research tool, I see "chuck norris jokes" has global 246,000 searches. And again searching "jokes chuck norris" has the same search result. But as see, order of keyword in search terms has, "hello how are you" and "how are you hello" has clearly different results. Now instead of search term (assuming "chuck norris jokes"), I was wondering, if I had to register chucknorrisjokes.com and jokeschucknorris.com, would it effect the ranking on the search result? Or would it be the same? As we see here, both the domains has the same keywords, just in different order. How would that effect? I hope what I am trying to say is clear.

    Read the article

  • RewriteRule dropping escaped parameter

    - by Gerd
    I need some help with the following RewriteRule: RewriteRule ^/iesearch/(.*)$ /jsp/search/ieaccelerators/visualsearch.jsp?q=$1 [L,PT] The intention is to rewrite search-queries from http://mydomain/iesearch/alvin+the+chip to a JSP. This works fine as long as the URL does not contain encoded characters such as: http://mydomain/iesearch/alvin+%26+the+chip. The rewrite log shows the following: (2) init rewrite engine with requested uri /iesearch/alvin+&+the+chip (2) rewrite '/iesearch/alvin+the+&+chip' - '/jsp/search/ieaccelerators/visualsearch.jsp?q=alvin+&+the+chip' (3) split uri=/jsp/search/ieaccelerators/visualsearch.jsp?q=alvin+&+the+chip - uri=/jsp/search/ieaccelerators/visualsearch.jsp, args=q=alvin+&+the+chip I would have hoped that the %26 is passed on instead of the &.

    Read the article

  • For On Page SEO, This Works Like Crazy

    When it comes to the search engines we need to be making sure that our website tells the search engines exactly what it is and what the content contained within is about. Once we have this right, which will come from the on page optimization and content, we need to build backlinks to our website which increases the popularity of our website in the search engines eyes and lifts us up through the rankings.

    Read the article

  • The Best Way to Build Backlinks - A List of 36 Sites to Get Backlinks

    Every webmaster can understand the meaning of backlinks. We need backlinks to rank our sites higher in Google and other search engines. Search engines count the number of backlinks for a web page and assign a rank to it in in search results. Hence, every webmaster always look to get as many backlinks as possible. In this article I explained few free methods of getting links.

    Read the article

  • Crazy VM clock drift

    - by SimonJGreen
    This is taken from an Ubuntu 10.10 VM running on ESX5: Nov 3 21:58:50 server1 ntpd[21169]: adjusting local clock by 31.187370s Nov 3 22:02:36 server1 ntpd[21169]: adjusting local clock by 31.159808s Nov 3 22:05:18 server1 ntpd[21169]: adjusting local clock by 31.067579s Nov 3 22:07:59 server1 ntpd[21169]: adjusting local clock by 30.952187s Nov 3 22:11:38 server1 ntpd[21169]: adjusting local clock by 30.890147s According to the VMWare KB no kernel tweaks should be needed for Ubuntu 10.10 to maintain time to their standards. What's especially odd is the drift seems fairly consistent. Any help appreciated on this one!

    Read the article

  • How do you develop web applications? [closed]

    - by ck3g
    How do you and/or your team develop your web applications? Language, framework or platform doesn't matter. I would like to know about the structure of your environment. For example: Using IDE on workstation and project files on remote host accessing via sftp. Files are saved instantly on remote host; All files are local and are uploaded on remote host during saving; Files are local, web server is running on local computer and is tested at local host. etc. You could write down also about the benefits of your approach, this will be useful for me. Thanks upd: Here must be a question and here it is: which is the best approach by your opinion?

    Read the article

  • Enable grub boot menu on new system

    - by Remus Rigo
    I have installed Ubuntu 11.04 and I would like to see the boot menu when the system starts (by default it is hidden or the timeout=0) # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod vbe insmod vga insmod video_bochs insmod video_cirrus } insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set=root 44f311b4-0b40-4d10-b004-78108539fc39 if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=auto load_video insmod gfxterm fi terminal_output gfxterm insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set=root 44f311b4-0b40-4d10-b004-78108539fc39 set locale_dir=($root)/boot/grub/locale set lang=en_US insmod gettext if [ "${recordfail}" = 1 ]; then set timeout=-1 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set=root 44f311b4-0b40-4d10-b004-78108539fc39 insmod jpeg if background_image /boot/grub/boot.jpg; then true else set menu_color_normal=white/black set menu_color_highlight=black/light-gray fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### if [ ${recordfail} != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode if [ "$linux_gfx_mode" != "text" ]; then load_video; fi menuentry 'Ubuntu, with Linux 2.6.38-8-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail set gfxpayload=$linux_gfx_mode insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set=root 44f311b4-0b40-4d10-b004-78108539fc39 linux /boot/vmlinuz-2.6.38-8-generic root=UUID=44f311b4-0b40-4d10-b004-78108539fc39 ro quiet splash vt.handoff=7 initrd /boot/initrd.img-2.6.38-8-generic } menuentry 'Ubuntu, with Linux 2.6.38-8-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail set gfxpayload=$linux_gfx_mode insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set=root 44f311b4-0b40-4d10-b004-78108539fc39 echo 'Loading Linux 2.6.38-8-generic ...' linux /boot/vmlinuz-2.6.38-8-generic root=UUID=44f311b4-0b40-4d10-b004-78108539fc39 ro single echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-2.6.38-8-generic } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set=root 44f311b4-0b40-4d10-b004-78108539fc39 linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set=root 44f311b4-0b40-4d10-b004-78108539fc39 linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### if [ "x${timeout}" != "x-1" ]; then if keystatus; then if keystatus --shift; then set timeout=-1 else set timeout=0 fi else if sleep --interruptible 3 ; then set timeout=0 fi fi fi ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ###

    Read the article

  • Travelling MVP #2: Community event at Bucharest, Romania

    - by DigiMortal
    My second trip was to DevReach with two stops. My first stop was at Bucharest where I met with my friend Dimitar Georgiev who is one of authors of Gym Realm service. Romanian MVP Andrei Ignat was our host there and organized meeting with local community guys. With me – it was first time in my life – was one more guy from Estonia visiting DevReach and he made the whole trip with me. Bucharest We arrived to Bucharest 29.09 at night. We stayed at Hotel Michelangelo. It’s small hotel with nice rooms, free WiFi and very good service. Although my room was on the first floor there was no street noise. We visited one restaurant that offers national cuisine and it was really great. Next day we went out with local guys and had some beers in “old town”. Bucharest “old town” is nice and cozy. There are many bars open and I am sure everybody will find there some very okay place. After supper we visited one warm karaoke bar where we had beers with local guys. Andrei Ignat – karaoke star Agu Suur and Andrei Ion Rinea enjoying karaoke and tequila Community event Next day we had community event. I made my session about ASP.NET Web API and Dimitar told about how to port ASP.NET web applications to cloud environment. Sessions were held at study class of one local company. Dimitar Georgiev speaking about porting web apps to Windows Azure. As it was usual community evening and not some bigger event there were about 12 guys attending from Bucharest. There were both IT-PROs and developers and one nice thing about Bucharest community is that they are listening to you very well and they ask questions if something is unclear or if you slide over from topic they are interested in. Okay, we tried to keep up good tempo so people stay awake and I think we succeeded. After sessions we went all together to local Piranha pub that was near event venue. We had some beers with local guys and talked with them on different technology topics. It was another good and interesting evening at Bucharest. I want to go back there for sure. As it was my first trip to Bucharest and mostly I gathered experiences I think my next community trip there will be way stronger. I take it as a challenge. Plus – I have there some new friends and I want to meet them too – be it community event or not. :)

    Read the article

  • MacOSX VirtualHost: "You don't have permission to access / on this server" error

    - by David Casillas
    The Apache instalation of MacOSX is running Ok. I have tried to create a VirtualHost called test.local, but as soon as I uncomment from /private/etc/apache2/httpd.conf the line Include /private/etc/apache2/extra/httpd-vhosts.conf , and try to access test.local virtualhost I get an error "You don't have permission to access / on this server". The VirtualHost configuration in /private/etc/apache2/extra/httpd-vhosts.conf is: <VirtualHost *:80> ServerName test.local DocumentRoot "/Users/username/Sites/Test/public" <Directory "/Users/username/Sites/Test/public"> Options Indexes FollowSymLinks Includes AllowOverride All Order allow,deny Allow from all </Directory> </VirtualHost> I have also include the VirtualHost in hosts file: 127.0.0.1 test.local

    Read the article

  • Remote Desktop Services Gateway Issue

    - by AVandelay05
    Alright fellow techies here's the rundown. I have installed Server 2008 r2 Remote Dekstop Services on a VM in my network. I installed the following RD role services: RD Session Host, Licensing, Connection Broker, Gateway, Web Access. When I set things up originally, the gateway server and RDWeb worked as it should locally. After getting things running locally (remoteserver.domainname.local) I wanted to test things externally. From the outside, I couldn't get things running (meaning I could connect to rdweb access externally, but when I tried to run an app I would get the message "can't connect/find computer"). Here's my setup for external access The VM has every RD Services role services installed on it, meaning it acts as gateway, rd web access, session host, licensing, the whole bit. I made a self-signed certificate on the gateway server (gateway.domainname.net is the cert name). Internally, I have a secondary forward-lookup zone called domainname.net with an A record gateway pointing to the local IP of the gateway server. On our public DNS (domainname.net) I have an A record gateway. This is to access the RDWeb externally. In IIS I have the following authentication settings RDWeb: All disabled except for anonymous authentication Rpc: All disabled except for basic and windows RpcWithCert: All disbled except for windows authentication I have the necessary web access config in our sonicwall tz210 (https and rdp, external ip pointing to local ip of rds server) RAP and CAP have the correct user and computer groups, authentication, and allowed devices After all of this, here's what happens accessing externally. I can login correctly to RDWeb Access (I've tried a bogus login, I can't login to it so that's working properly). I see the Apps for use. I click on an app, click connect, the credential window opens, I put in the correct user creds, it tries to connect to the gateway server, but then the cred window comes back in view. I tried to reach a limit of failed logins, but never reached one, haha. So from the same external client machine I try to connect to the gateway through a Remote Desktop connection. I put in the correct gateway settings in the RD window, try to connect and get the same results as I did in RDWeb access. I checked the event logs on the RD Services machine and saw the following event IDs around the time I tried to login externally: ID 6037 with the message "The program svchost.exe, with the assigned process ID 2168, could not authenticate locally by using the target name host/gateway.domainname.net. The target name used is not valid. A target name should refer to one of the local computer names, for example, the DNS host name. Try a different target name." ID 10 RADWebAccess "RD Web Access was unable to access gateway.domainname.net, which is the server that is specified as running the RemoteApp and Desktop Connection Management service. Ensure that the computer account of the RD Web Access server is a member of the TS Web Access Computers security group on gateway.domainname.net" ID 4625 "An account failed to log on. Subject: Security ID: NULL SID Account Name: - Account Domain: - Logon ID: 0x0 Logon Type: 3 Account For Which Logon Failed: Security ID: NULL SID Account Name: Administrator Account Domain: gateway.domainname.net Failure Information: Failure Reason: Unknown user name or bad password. Status: 0xc000006d Sub Status: 0xc000006a Process Information: Caller Process ID: 0x0 Caller Process Name: - Network Information: Workstation Name: USER-LAPTOP Source Network Address: External IP Source Port: 63125 Detailed Authentication Information: Logon Process: NtLmSsp Authentication Package: NTLM Transited Services: - Package Name (NTLM only): - Key Length: 0 This event is generated when a logon request fails. It is generated on the computer where access was attempted. The Subject fields indicate the account on the local system which requested the logon. This is most commonly a service such as the Server service, or a local process such as Winlogon.exe or Services.exe. The Logon Type field indicates the kind of logon that was requested. The most common types are 2 (interactive) and 3 (network). The Process Information fields indicate which account and process on the system requested the logon. The Network Information fields indicate where a remote logon request originated. Workstation name is not always available and may be left blank in some cases. The authentication information fields provide detailed information about this specific logon request. - Transited services indicate which intermediate services have participated in this logon request. - Package name indicates which sub-protocol was used among the NTLM protocols." I don't think the VM has a null SID. The SID of the VM and it's physical host have different SIDS. I can access the blank page for rpc externally using the external gateway name. It seems like authentication is a problem. Also, is it a problem that the external name of the gateway server doesn't match the local name? The external name (which the cert is based on) is gateway.domainname.net and the internal name is remoteserver.domainname.local. That's the only thing I can think of that would be the problem, but the external name has to be different from the local right? Internally, I ping gateway.domainname.net and it gives me the correct local IP of the server. Now, there isn't an actual computer name in AD, but I don't know how I would achieve that? I hope I've been clear....any help would be appreciated. I think I'm close to achieving this. :)

    Read the article

  • Why is sudo bash different from regular bash

    - by cyberjar09
    Problem description : I am using something called play framework in my development which requires me to make the python script play available in the path. Hence I create a symbolic link in /usr/local/bin ... Now I have written a shell script (call it status.sh) which calls this python script as follows : play status <some values here related to my app> &> /tmp/xyz.txt and this shell script then sends me the file via email. This works perfectly when I execute the script as follows ./script.sh. However when the script is executed as a cron expression everyday I get an output from stderr saying 'play: command not found'. Hence I did some digging on my own and here are my findings : echo $PATH when I am on the shell shows that I have /usr/local/bin available to me hence I can successfully execute the command play status however when I type in sudo bash and then echo $PATH I do not have the path /usr/local/bin anymore. It is a limited set of folders (one of them being /usr/bin). Q : Why this behavior ?! I fail to understand why the path is different. Also as a workaround would you suggest I do : new symbolic link from /usr/bin to /usr/local/bin (what are the side effects of this?) remove /usr/local/bin sym link altogether and only use /usr/bin is there a convention that I am not following here for linking new programs and executing them from $PATH ? Thanks.

    Read the article

  • Unlocking Productivity

    - by Michael Snow
    Unlocking Productivity in Life Sciences with Consolidated Content Management by Joe Golemba, Vice President, Product Management, Oracle WebCenter As life sciences organizations look to become more operationally efficient, the ability to effectively leverage information is a competitive advantage. Whether data mining at the drug discovery phase or prepping the sales team before a product launch, content management can play a key role in developing, organizing, and disseminating vital information. The goal of content management is relatively straightforward: put the information that people need where they can find it. A number of issues can complicate this; information sits in many different systems, each of those systems has its own security, and the information in those systems exists in many different formats. Identifying and extracting pertinent information from mountains of farflung data is no simple job, but the alternative—wasted effort or even regulatory compliance issues—is worse. An integrated information architecture can enable health sciences organizations to make better decisions, accelerate clinical operations, and be more competitive. Unstructured data matters Often when we think of drug development data, we think of structured data that fits neatly into one or more research databases. But structured data is often directly supported by unstructured data such as experimental protocols, reaction conditions, lot numbers, run times, analyses, and research notes. As life sciences companies seek integrated views of data, they are typically finding diverse islands of data that seemingly have no relationship to other data in the organization. Information like sales reports or call center reports can be locked into siloed systems, and unavailable to the discovery process. Additionally, in the increasingly networked clinical environment, Web pages, instant messages, videos, scientific imaging, sales and marketing data, collaborative workspaces, and predictive modeling data are likely to be present within an organization, and each source potentially possesses information that can help to better inform specific efforts. Historically, content management solutions that had 21CFR Part 11 capabilities—electronic records and signatures—were focused mainly on content-enabling manufacturing-related processes. Today, life sciences companies have many standalone repositories, requiring different skills, service level agreements, and vendor support costs to manage them. With the amount of content doubling every three to six months, companies have recognized the need to manage unstructured content from the beginning, in order to increase employee productivity and operational efficiency. Using scalable and secure enterprise content management (ECM) solutions, organizations can better manage their unstructured content. These solutions can also be integrated with enterprise resource planning (ERP) systems or research systems, making content available immediately, in the context of the application and within the flow of the employee’s typical business activity. Administrative safeguards—such as content de-duplication—can also be applied within ECM systems, so documents are never recreated, eliminating redundant efforts, ensuring one source of truth, and maintaining content standards in the organization. Putting it in context Consolidating structured and unstructured information in a single system can greatly simplify access to relevant information when it is needed through contextual search. Using contextual filters, results can include therapeutic area, position in the value chain, semantic commonalities, technology-specific factors, specific researchers involved, or potential business impact. The use of taxonomies is essential to organizing information and enabling contextual searches. Taxonomy solutions are composed of a hierarchical tree that defines the relationship between different life science terms. When overlaid with additional indexing related to research and/or business processes, it becomes possible to effectively narrow down the amount of data that is returned during searches, as well as prioritize results based on specific criteria and/or prior search history. Thus, search results are more accurate and relevant to an employee’s day-to-day work. For example, a search for the word "tissue" by a lab researcher would return significantly different results than a search for the same word performed by someone in procurement. Of course, diverse data repositories, combined with the immense amounts of data present in an organization, necessitate that the data elements be regularly indexed and cached beforehand to enable reasonable search response times. In its simplest form, indexing of a single, consolidated data warehouse can be expected to be a relatively straightforward effort. However, organizations require the ability to index multiple data repositories, enabling a single search to reference multiple data sources and provide an integrated results listing. Security and compliance Beyond yielding efficiencies and supporting new insight, an enterprise search environment can support important security considerations as well as compliance initiatives. For example, the systems enable organizations to retain the relevance and the security of the indexed systems, so users can only see the results to which they are granted access. This is especially important as life sciences companies are working in an increasingly networked environment and need to provide secure, role-based access to information across multiple partners. Although not officially required by the 21 CFR Part 11 regulation, the U.S. Food and Drug Administraiton has begun to extend the type of content considered when performing relevant audits and discoveries. Having an ECM infrastructure that provides centralized management of all content enterprise-wide—with the ability to consistently apply records and retention policies along with the appropriate controls, validations, audit trails, and electronic signatures—is becoming increasingly critical for life sciences companies. Making the move Creating an enterprise-wide ECM environment requires moving large amounts of content into a single enterprise repository, a daunting and risk-laden initiative. The first key is to focus on data taxonomy, allowing content to be mapped across systems. The second is to take advantage new tools which can dramatically speed and reduce the cost of the data migration process through automation. Additional content need not be frozen while it is migrated, enabling productivity throughout the process. The ability to effectively leverage information into success has been gaining importance in the life sciences industry for years. The rapid adoption of enterprise content management, both in operational processes as well as in scientific management, are clear indicators that the companies are looking to use all available data to be better informed, improve decision making, minimize risk, and increase time to market, to maintain profitability and be more competitive. As more and more varieties and sources of information are brought under the strategic management umbrella, the ability to divine knowledge from the vast pool of information is increasingly difficult. Simple search engines and basic content management are increasingly unable to effectively extract the right information from the mountains of data available. By bringing these tools into context and integrating them with business processes and applications, we can effectively focus on the right decisions that make our organizations more profitable. More Information Oracle will be exhibiting at DIA 2012 in Philadelphia on June 25-27. Stop by our booth Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} (#2825) to learn more about the advantages of a centralized ECM strategy and see the Oracle WebCenter Content solution, our 21 CFR Part 11 compliant content management platform.

    Read the article

  • Use Your Web Browser As A Calculator

    - by Gopinath
    Quite often most of us require Calculator application to evaluate percentage calculations, divisions,etc. Whenever I needed a calculator application I launch Windows Calculator application as it’s built into each and every version of Windows I use.  But the moment I learn that almost all the web browsers have a built in calculator, I stopped using Windows Calculator.  Google Search Box – Every Browser’s Built In Calculator Google Search Box is the built in calculator of every web browser. The search box is capable of evaluation simple expressions like 20/50+10 as well as complex arithmetic formulas that include functions like sin, cos, tan,etc. Almost every web browser has Google Search box by default, if not you can install it very quickly. In Google Chrome browser, Google Search box is built in right inside the address bar. In Firefox & Internet Explorer you can locate it on the top right corner.    To perform calculations, why to launch Calculator when we have a web browser open on our desktop most of the time? Join us on Facebook to read all our stories right inside your Facebook news feed.

    Read the article

  • Dans Guardian install

    - by Matt
    I'm trying to install Dans Guardian on a virtual machine. The instructions ask me to run the ./configure script and then execute the command make install. The configure script runs fine but the make install throws errors. Making all in src make[2]: Entering directory `/webmin/dansguardian-2.10/src' g++ -DHAVE_CONFIG_H -I. -I.. -D__CONFFILE='"/usr/local/etc/dansguardian/dansguardian.conf"' -D__LOGLOCATION='"/usr/local/var/log/dansguardian/"' -D__PIDDIR='"/usr/local/var/run"' -D__PROXYUSER='"nobody"' -D__PROXYGROUP='"nobody"' -D__CONFDIR='"/usr/local/etc/dansguardian"' -g -O2 -MT dansguardian-fancy.o -MD -MP -MF .deps/dansguardian-fancy.Tpo -c -o dansguardian-fancy.o `test -f 'downloadmanagers/fancy.cpp' || echo './'`downloadmanagers/fancy.cpp downloadmanagers/fancy.cpp: In member function âstd::string fancydm::timestring(int)â: downloadmanagers/fancy.cpp:507:72: error: âsnprintfâ was not declared in this scope make[2]: *** [dansguardian-fancy.o] Error 1 make[2]: Leaving directory `/webmin/dansguardian-2.10/src' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/webmin/dansguardian-2.10' make: *** [all] Error 2 I'm running 12.04 LTS server x64

    Read the article

  • SEO, SEM Tools

    Search engine optimization allows you to optimize your website and get the traffic. The search engines have complicated algorithms. The search engines use these algorithms to rank the websites.

    Read the article

  • Page Titles - Including gender of a fashion product in page titles?

    - by Cedric
    I need a bit of help to decide whether it is worth including gender in page titles. In the webmaster tools: I looked at our search queries that include "women", and they account for 9% of our total search queries for the site. I am wondering if it is the right way assess the benefit of including "woman" or "men" in page titles, looking at it with existing results pointing to us already? Is there another tool that I can check the actual queries that may not include us in search results? Like google insights maybe? http://www.google.com/insights/search/#q=shoes%2Cshoes%20for%20women&cmpt=q So it looks like 1.1% of searches for "shoes" are also "shoes for women" is that correct? As a direct comparison, doing the same analysis on our own search queries, I get 1.8% when comparing "shoes for women" to "shoes" Implementing this automation would probably affect 99% of our site if not more, splitting it in 2 segments (one portion of page titles including "women" and the other including "men") Will doing so create a massively repetitive keyword throughout the site, hurting SEO? http://support.google.com/webmasters/bin/answer.py?hl=en&answer=35624 (see "Avoid repeated or boilerplate titles.")

    Read the article

< Previous Page | 274 275 276 277 278 279 280 281 282 283 284 285  | Next Page >