Search Results

Search found 11994 results on 480 pages for 'mixed mode'.

Page 278/480 | < Previous Page | 274 275 276 277 278 279 280 281 282 283 284 285  | Next Page >

• Second video card (PCI) under Windows 7

  - by dbkk101

  I'm trying to get an old PCI video card (Diamond Stealth 2500) along with a normal PCI-E video card. In BIOS, there is a setting to switch between PEG/PCI or PCI/PEG on startup (PEG is PCI-E Graphics). When I use PCI/PEG only the old PCI card works, when I use the other one, only the new PEG card works. In PEG/PCI mode, Windows 7 recognizes the card and shows it in Device Manager as Standard VGA adapter, but it shows a warning for the device ("This device cannot start. (Code 10)").

  Read the article

• How do I share a complete XP disk so it can be seen from a Windows 7 system?

  - by Ian Ringrose

  This should be easier! (both computers can see the internet etc so I know the network it’s self is working) I have a normal home network with a Windows XP machine on it and the new Windows 7 (64 bit) machine. So I can transfer the files to the new Windows 7 machine, I wish to share the complete disk (and all files) from the Windows XP machine and access them from the Windows 7 machine. Is there a step by step set of instructions for doing this anywhere? So fare I have: put both computers into the same workgroup put the windows 7 machine into work network mode so it can see the XP machine in the work group shared the XP disk as read only But when I try to access a lot of the folders on the XP disks, I am told I am not allowed to access them. (I was not asked for any passwords by the windows 7 machine when I accessed the XP machine. The XP machine just has its default account with no password set on it)

  Read the article

• How to start wuala on the linux commandline with auto login

  - by mit

  When i start wuala on the linux commandline like this, it logs me in and the folder is mounted: wualamcd login username password enableAutoLogin I can shut it down from another console typing wuala shutdown But how do I actually use the auto login that I just set using the enableAutoLogin switch? What is the command to start it again, so it logs in but does not need the password? I tried wualamcd login and wuala starts but no one gets logged in. Auto login in gui mode works fine. This is 32 bit linux with openjdk 6 JRE.

  Read the article

• DNS Resolution doesn't work after uninstalling Cisco VPN & Deterministic Network Enhancer in Win 7

  - by Craig M

  I just upgraded my home PC to Windows 7 Ultimate 32 bit. After trying various methods to get the Cisco VPN client to work, I gave up and decided to just run it in XP mode. The last steps I tried were in this article ( http://social.technet.microsoft.com/Forums/en-US/w7itproappcompat/thread/d880dfe5-7f44-4955-8620-2a9355d8ea8b/ ) After that, I uninstalled the Cisco client and rebooted. I uninstalled the Deterministic Network Enhancer and rebooted again. Both uninstalled successfully, but now I'm not able to resolve any DNS. The only way I can resolve DNS is to reinstall the DNE, reboot, and uninstall the DNE. Then I am able to resolve DNS lookups until I reboot again. Once it's rebooted, no more DNS. Any ideas?

  Read the article

• How can I port forward with an airport extreme and a NAT enabled modem?

  - by Jon

  I run an Actiontec HD701D modem with NAT to an Airport extreme base station to laptop etc. As you might expect I get double NAT issues. I tried a lot of different things to forward a port, but no luck. Currently the airport is in bridge mode letting the modem handle the NAT, but still can't forward the port. Also to note: firewall is off on the router, firewall is set to allow the application in OSX 10.6.3 and I did forward the port in the router. No luck.

  Read the article

• Dell 620 display is too bright to use

  - by keith

  I have a Dell D620 with a display problem. In windows 7 the display seems to be too bright, the text is broken up, the only way to see the mouse is at a very oblique angle. Changing the brightness with fn and brightness control has little/no effect. When I put it in high contrast mode I can see all the colors, but any windows pictures etc are still useless. I cannot get it to connect to an external monitor via VGA port or via a USB-VGA connector.

  Read the article

• Photoshop / Illustrator Fill text box with large string.

  - by Xetius

  I have a massive string (lots of Fibonacci numbers concatenated together). I don't know how much of this text I need to fill an A4 page. What I was hoping for was to paste a large block into a text box and have it display as much as possible, wrapping the text at the end of a line, but it is not doing that. It is just displaying a blank box (With the text overflowing into an awaiting textbox or something. I have tried pasting smaller amounts of text into the text box, and it appears that it will get about half way and then go into 'blank' mode. All I need is a simple way of creating a background of numbers which I don't have to type in. Any ideas?

  Read the article

• Moving a Drupal between linux servers, best practice to avoid file-ownership problems

  - by zero

  I want to port over a Drupal commons 6x24 from a local LAMP-stack to a production webserver. Both systems run OpenSuse Linux. How do I do this, what are the most important steps. How should I handle file-ownership. It's important for me to have to have full control of the file ownership. If I use the wwwrun account, I frequently run into problems, due to a very strict webserver-admin. See for example the long history of looking for fixes and solutions see this thread and even more interesting see this very long and impressive thread here. All troubles I run into have to do with file-owernship and permissions. This is my current setup; Note: This was just a quick hacked installation - quick and dirty. Well my interest is after the general options i have in the port of a drupal from linux to linux linux-vi17:/srv/www/htdocs/com624 # ls -l insgesamt 224 -rwxrwxrwx 1 root www 45285 19. Jan 00:54 CHANGELOG.txt -rwxrwxrwx 1 root www 925 19. Jan 00:54 COPYRIGHT.txt -rwxrwxrwx 1 root www 206 19. Jan 00:54 cron.php drwxrwxrwx 2 root www 4096 19. Jan 00:54 includes -rwxrwxrwx 1 root www 923 19. Jan 00:54 index.php -rwxrwxrwx 1 root www 1244 19. Jan 00:54 INSTALL.mysql.txt -rwxrwxrwx 1 root www 1011 19. Jan 00:54 INSTALL.pgsql.txt -rwxrwxrwx 1 root www 47073 19. Jan 00:54 install.php -rwxrwxrwx 1 root www 15572 19. Jan 00:54 INSTALL.txt -rwxrwxrwx 1 root www 14940 19. Jan 00:54 LICENSE.txt -rwxrwxrwx 1 root www 1858 19. Jan 00:54 MAINTAINERS.txt drwxrwxrwx 3 root www 4096 19. Jan 00:54 misc drwxrwxrwx 35 root www 4096 19. Jan 00:54 modules drwxrwxrwx 4 root www 4096 19. Jan 00:54 profiles -rwxrwxrwx 1 root www 1470 19. Jan 00:54 robots.txt drwxrwxrwx 2 root www 4096 19. Jan 00:54 scripts drwxrwxrwx 4 root www 4096 19. Jan 00:54 sites drwxrwxrwx 7 root www 4096 19. Jan 00:54 themes -rwxrwxrwx 1 root www 26250 19. Jan 00:54 update.php -rwxrwxrwx 1 root www 4864 19. Jan 00:54 UPGRADE.txt -rwxrwxrwx 1 root www 294 19. Jan 00:54 xmlrpc.php linux-vi17:/srv/www/htdocs/com624 # thx to BetaRides answer here a quick overview on the drush functionality with rsync http://drush.ws/ core-rsync Rsync the Drupal tree to/from another server using ssh. Examples: drush rsync @dev @stage Rsync Drupal root from dev to stage (one of which must be local). drush rsync ./ @stage:%files/img Rsync all files in the current directory to the 'img' directory in the file storage folder on stage. Arguments: source May be rsync path or site alias. See rsync documentation and example.aliases.drushrc.php. destination May be rsync path or site alias. See rsync documentation and example.aliases.drushrc.php. Options: --mode The unary flags to pass to rsync; --mode=rultz implies rsync -rultz. Default is -az. --RSYNC-FLAG Most rsync flags passed to drush sync will be passed on to rsync. See rsync documentation. --exclude-conf Excludes settings.php from being rsynced. Default. --include-conf Allow settings.php to be rsynced --exclude-files Exclude the files directory. --exclude-sites Exclude all directories in "sites/" except for "sites/all". --exclude-other-sites Exclude all directories in "sites/" except for "sites/all" and the site directory for the site being synced. Note: if the site directory is different between the source and destination, use --exclude-sites followed by "drush rsync @from:%site @to:%site" --exclude-paths List of paths to exclude, seperated by : (Unix-based systems) or ; (Windows). --include-paths List of paths to include, seperated by : (Unix-based systems) or ; (Windows). Topics: docs-aliases Site aliases overview with examples Aliases: rsync

  Read the article

• Broadcom bluetooth driver for Windows 7 on MacBook Pro

  - by Sergiy Byelozyorov

  I have installed Windows 7 on MacBook Pro using BootCamp. Usually when turning my Bluetooth headset on and trying to pair it with Mac for the first time, Windows would fail to install drivers and open solution in Action Center, which suggests to download the driver from the Broadcom webpage. This worked before and drivers would install and work. However now, when I start driver installer, it would get stuck at "Detecting Bluetooth Device" stage. Below the steps there is also a warning with text, which says "Please plug in or turn ob your Bluetooth device". This is how the installer looks like when it's stuck: I have tried turning my headset on/off, bringing it into pairing mode, installing/uninstalling device to/from the Bluetooth Devices. None of these worked. Any ideas?

  Read the article

• Can you install Ubuntu Server in a Windows PC VM on Windows 7?

  - by Lance Fisher

  I am running Windows 7 64-bit. I've installed Windows Virtual PC and Windows XP Mode successfully. Next, I downloaded Ubuntu Server 9.04 32-bit. I created a new virtual machine with a dynamically expanding .vhd, loaded the Ubuntu .iso, and booted the machine. I successfully made it through the install, but when the machine reboots, I get a segmentation fault. Here is a screenshot. Has anyone successfully installed Ubuntu on Windows Virtual PC?

  Read the article

• Kubuntu Monitor Out of Range

  - by uncleo

  My X server seems to be faulty, but I don't know why. I had some problems last week with a new motherboard, but they seemed to be resolved. Today, I updated Kubuntu and restarted, but my Viewsonic VX900 LCD monitor shows the splash screen for several seconds, then displays the message "Out of Range" I have tried various kernels in Grub, some in recovery mode, most do the same thing. No key combinations bring up a shell prompt like I expect. The one exception was a very old kernel, that would only mount the file system as read-only, so I can't fix up the xorg.conf file. Is there anything to be done?

  Read the article

• strange behaviour - dhclient needs to be run twice in order to connect to wireless

  - by splicer

  I am trying to connect my to my wlan without the use of NetworkManager. I run the following commands after boot: iwconfig wlan0 enc <WEP passwd> mode managed essid <name> channel 6 ifconfig wlan0 up dhclient wlan0 At this point, dhclient stalls for ages (perhaps 2 minutes), then it returns with PING 192.168.1.254 (192.168.1.254) from 192.168.1.65 wlan0: 56(84) bytes of data. --- 192.168.1.254 ping statistics --- 3 packets transmitted, 0 received, +3 errors, 100% packet loss, time 3000ms pipe 3 .. The strange thing is that when I run pkill dhclient; dhclient wlan0 right after this, it connects in about <3 seconds. Any idea what could be the cause of this problem? Edit: oh, and I did try using the -timeout flag on dhclient but that didn't seem to make any difference (it still stalled for ages).

  Read the article

• opening and closing connection with port happening fastly

  - by michale

  We have a Main application named "Trevor" installed in 2008R2 machine named "TEAMER12" which is slow now. One more application named "TVS" also running in and found there were many connections per second occurring to port 5009. netstat tool mentions that some fast connection open/close seen for port 5009 So first it will be listening mode like shown below TCP 0.0.0.0:5009 TEAMER12:0 LISTENING then establishes connection like TCP 127.0.0.1:5009 TEAMER12:49519 ESTABLISHED TCP 127.0.0.1:5009 TEAMER12:60903 ESTABLISHED After that iwill become TIME_WAIT and i could see several entries like shown below TCP 127.0.0.1:49156 TEAMER12:5009 TIME_WAIT after that it will establish connection like TCP 127.0.0.1:60903 TEAMER12:5009 ESTABLISHED TCP 127.0.0.1:64181 TEAMER12:microsoft-ds ESTABLISHED again it will go several entries like TIME_WAIT TCP 127.0.0.1:49156 TEAMER12:5009 TIME_WAIT Finally it will establish like this TCP 172.26.127.40:139 TEAMER12:0 LISTENING TCP 172.26.127.42:139 TEAMER12:0 LISTENING TCP 172.26.127.42:5009 TEAMER12:64445 ESTABLISHED TCP 172.26.127.42:64445 TEAMER12:5009 ESTABLISHED Can any body tell me whats the reason behind why many connections per second occurring to port 5009 and why application slow?

  Read the article

• Firewalling a Cisco ASA Split tunnel

  - by dunxd

  I have a Cisco ASA 5510 at head office, and Cisco ASA 5505 in remote offices. The remote offices are connected over a split tunnelled VPN - the ASA 5505s use "Easy VPN" Client type VPN in Network Extension Mode (NEM). I'd like to set firewall rules for the non-tunnelled traffic only. Traffic over the VPN to head office should not have any firewall rules applied. I might want to apply different firewall rules to different remote offices. All the documentation I have been able to find assumes the Client VPN is a software endpoint, and all the configuration is done at the 5510. When using a Cisco 5505 as the VPN client, is it possible to configure any firewalling at the Client end, or does it all have to come from the 5510? Are there any other issues to look out for when split-tunnelling a VPN by this method?

  Read the article

• How can I attach RAWs to already imported JPEGs in Aperture

  - by Sascha Vogt

  I shoot photos in RAW+JPEG mode since I got my DSLR. In the beginning I only used the JPEGs but lately I'm using RAW more and more. Unfortunately I imported only JPEGs in my first projects in Aperture. I already tagged, starred and cropped a lot of images and don't want to loose these information. But I would now like to "add" the RAWs to the old masters, so I can do more editing on these images. I didn't find any way to create a RAW+JPEG original in Aperture other than importing as such right in the beginning. Can anyone help? Greetings -Sascha-

  Read the article

• Troubleshooting intermittantly long 'page loading' problem

  - by justSteve

  Working off IIS 7 with an asp.net mvc app. Most page accesses are lightening quick. Sometimes the browser reports 'page loading' for an exceptionally long time. We are still in the development/testing mode so it's not a network/bandwidth issue. Happens in both IE and FF. No explicit error conditions in the server logs. If i could reproduce it i could run firebug/fiddler to give more info. As it is, it's a little too infrequent to simply leave both those running hoping for the condition to fire - unless/until that's the only option to get better info. I have a hunch this is client-side jquery/ajax related but only a hunch - don't have enough background in either jQuery or MVC to really know what can go wrong. Any initial troubleshooting suggestions welcome. thx

  Read the article

• Emacs doesn't load gui.

  - by D Connors

  Hi, whenever I run emacs or emacs23 on terminal I just get the following output: ** (emacs:2620): CRITICAL **: menu_proxy_module_load: assertion `dbusproxy != NULL' failed And the gui doesn't load, and emacs' window never opens. The emacs process doesn't actually crash (the terminal stays busy, and I can see the emacs23 process running with ps -e). I've tried running it with the -D --debug-init arguments, but the same thing happens and the output is exactly the same. However, if I run emacs -nw it successfully runs emacs in terminal mode as if nothing were wrong. Strangely, this problem only started happening the second time I ran emacs today. The first time it worked perfectly fine. Since then, I've tried rebooting and I've tried purging the emacs installation, to no success. I haven't installed any new packages today, but I might have upgraded some, could that be the reason? Is there a way to find out which packages were installed/upgraded today? Thanks I'm running Ubuntu Lucid

  Read the article

• unable to install oracle

  - by Mohamed Saligh

  I have installed oracle few months back. I was running fine in my local system. Unfortunately my friend has removed all the directories in safe mode. meaning to say it was not properly un-installed from my system. I tried to remove all the Registry keys, Services associated with oracle. Now, I can install it. Unable to use any sqlplus services or anything. How to completely remove my hidden old files and services if any. Need to install and use it. Any help indeed

  Read the article

• Easily tell if focused on VirtualBox window?

  - by Benjamin Oakes

  Is there a way to make it very obvious that my VirtualBox window isn't in focus? The problem I'm having is switching between workspaces on Ubuntu or OS X and then trying to type in my Windows virtual machine, only to find that it's not in focus. The Windows window looks like it's in focus (based on the title bar), but I'm actually typing in Firefox on the host machine, for example. It's even worse because the Windows text insertion cursor is blinking to show focus. Ideally, I'd like the VM's display to get unsaturated (e.g. a "partial" grayscale) when not in focus, just to prevent this keyboard-focus problem. Other options would be fine too, as long as I don't have to second guess where my focus is. I'm not using the seamless mode -- the display is all within a window.

  Read the article

• How do I stop track changes from turning on automatically in Word 2007

  - by Benj

  Whenever I open an existing document in Word 2007 (on Windows XP), word turns on track changes, and changes the display mode to "Final" (that is, not "Final Showing Markup" -- so I often don't even notice track changes is on if I don't remember to pay attention. This happens for ALL existing documents, and doesn't happen for new documents. I can't find any option in the configuration that would control this behavior. I would like to restore the original/default behavior where documents are opening with Track Changes off, and in "Final showing markup" display. Steps to Reproduce Open Word 2007. Create a new document. Verify that track changes is off. Save the document and close Word. Open the document (either directly or through Word). Track changes is now on. Any ideas?

  Read the article

• Windows program to remove titlebar, frame, etc from a window?

  - by Nelson

  I like playing computer games in windowed mode, as opposed to full screen. I don't like staring at the title bar, frame, and other UI junk. I also don't like seeing other stuff on my desktop around the window. Is there a simple Windows program that will strip the UI chrome off of an arbitrary window from some other application? Extra points for an easy way to put a black screen underneath the window, hiding the desktop. Note: I'm looking specifically to handle windows that are smaller than my desktop size. There's a variety of 'windowed maximized' options that make a window exactly the desktop size, and positioned so all the UI decorations are off screen. (E.g.: ShiftWindow). I'm trying to strip all the decorations away from a window that's smaller than desktop size.

  Read the article

• Cross-forest GPO between 2003 and 2008 Denied Beacuse it's "Inaccessible"

  - by j.rightly

  I have a two-way, non-transitive trust between two forests and domains, "W2003" and "W2008". In W2008 I have a GPO with user settings linked to a machine OU containing machine "Server". The GPO applies to Authenticated Users. Cross-forest loopback processing is enabled in merge mode. When I log onto Server as User (whose account exists in the W2003 domain), the GPO does not apply. I run RSoP and see that the GPO is "Denied" for the reason "Inaccessible." The GPO name is not listed, but the GUID is. I have checked the file-level permissions on the DC to ensure that User has access to read the GPO's folder and all its contents. What is going on?

  Read the article

• How to identify cause of system lock on debian squeeze?

  - by David Sanders

  I have a desktop system at work with debian squeeze installed. Every couple days or so, when I come in in the morning, the system appears to be asleep and won't wake up. I suspect it goes into power save mode and then doesn't receive the wake up signal when I click the mouse or touch the keyboard. Does anyone know where I should look in order to start tracking this down? Like log files, etc? I doubt it, but maybe the fact that I'm using a mac aluminum usb keyboard and a wireless usb mouse (that has an off switch) has something to do with it? Maybe, when I turn my mouse off at the end of the day, the system loses track of the device somehow? I dunno :P. Thanks in advance.

  Read the article

• "Verifying DMI Pool" hang caused by raid array..

  - by Ling

  Hi Experts, I have a problem, I obtained a new server with 4 hard drives (2 500 gig, 2 two TB), and an adeptec RAID card. I arranged them in two arrays with RAID 1 (500 gigs together as primary and the 2 TB drives for lots of data). When both arrays are configured, the server hangs while booting at message "Verifying DMI Pool", however if I remove the second array from the configuration the server boots fine. I have checked they are both on different channels, I have disabled all other peripherals from the boot menu and ensured the hard drive is #1. I have booted into the linux rescue mode and checked that it is reading both arrays fine. What else could be causing these problems? Thanks

  Read the article

• Encryption of external HDD -- accessible from windows without installation

  - by Rainer

  I would like to use encryption on my external HDD but I would like to be able to access the encrypted data from Windows as well. As suggested in other questions, TrueCrypt is one option here, or I am using momentarily encfs, which is not available for Windows. But my question goes further: I would like to be able to access the encrypted partition from Windows without installation as I will be using it from different Windows machines for which I have no administrator access. My main OS is Linux and I have full root access to that computer. Is there a full disk or file based encryption which I can use cross platform and which does not require installation under Windows? ADDITION: It seems that TrueCrypt provides a portable mode which fulfills my requirements partly: http://www.truecrypt.org/docs/?s=truecrypt-portable, but still the TrueCrypt driver needs to be installed by an administrator... pitty Thanks

  Read the article

< Previous Page | 274 275 276 277 278 279 280 281 282 283 284 285  | Next Page >