Search Results

Search found 19224 results on 769 pages for 'neural network tuning'.

Page 278/769 | < Previous Page | 274 275 276 277 278 279 280 281 282 283 284 285  | Next Page >

• ubuntu server in a vm, can't connect to internet

  - by jessh

  I'm attemtping to host my own development web server in a virtual box guest, Ubuntu Server. I would like this virtual machine to be accessible from not only my home network, but outside the LAN as well. As such, I've set up a static IP (so I can later forward ports to this static IP.) My virtual box settings have this vm only using one adapter -- in bridged mode. Here's what my /etc/network/interfaces looks like: iface eth0 inet static address 10.0.1.203 /*this is outside the DHCP range*/ netmask 255.255.255.0 gateway 10.0.1.1 network 10.0.1.0 broadcast 10.0.1.255 dns-nameservers: 8.8.8.8 8.8.8.4 Here's what the output of ifconfig looks like: https://dl.dropbox.com/u/2241201/locker/ubuntu.png My Host is a mac mini, running OS X 10.7. From within the guest, if I ping google.com: $ ping google.com # outputs 'ping: unknown host google.com' immediately Why am I unable to access the web?

  Read the article

• osx 10.6 dhcp client-id option

  - by Clustermagnet

  Trying to join a osx machine on a dhcp network which forces certain client IDs. Even if I was to modify the client-id via the network properties, the DHCP server is not accepting this request, since Windows and Apple send this via different options You can set the ClassID in the Network Control Panel in the DHCP Client ID box. The trick lies in setting up your DHCP server to recognize it. Windows XP sends the DHCP class ID via DHCP option 77, and OS X sends it via option 61. You'll have to set your DHCP server to check for option 61, +with an offset of 1 and a length of 9+. That's the tricky bit. So, without modifying the DHCP server... (which does not belong to me), is there anything that can be done on OSX to modify the client-id option to be 77?

  Read the article

• Wireless connection disconnects and reconnects with a Netgear WNA1000

  - by William Berkenkamp

  Ever since I made the permanent switch from Vista to Ubuntu i've had wireless connectivity problems. From watching the network manager when it disconnects it seems like it turns off the receiver for some reason. Could it be bad drivers? I used their install software and the site doesn't really offer driver downloads. The adapter is a Netgear WNA1000 if memory serves, and I don't know much about the router except that it's a Motorola Surfboard. And I figure this might help a bit *-network description: Ethernet interface product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:01:00.0 logical name: eth0 version: 01 serial: 00:1b:b9:a7:39:a4 size: 10Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=N/A latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:40 ioport:d800(size=256) memory:feaff000-feafffff memory:feac0000-feadffff *-network description: Wireless interface physical id: 1 bus info: usb@2:1.1 logical name: wlan0 serial: 00:26:f2:8b:fb:38 capabilities: ethernet physical wireless configuration: broadcast=yes driver=carl9170 driverversion=3.2.0-24-generic-pae firmware=1.9.4 ip=10.0.0.36 link=yes multicast=yes wireless=IEEE 802.11bgn I have tried installing WICD and it didn't fix the problem. Any help would be greatly appreciated. This problem is greatly limiting what I can do with my computer.

  Read the article

• Printing on Windows 8 64-Bit through Windows Server 2008 (32 Bit) RemoteApp

  - by Chris

  We have a network where our server is running on Windows Server 2008 (32 Bit) and a client computer is running on Windows 8.1 (64 bit) with a local printer attached to the client. The printer is an HP P1006. The remote app works well but when trying to print we get an odd "error 545". We have tried both using the "connect client printer" function in remoteapp and also making the printer shared over the network and printing to it via the network from within the remoteapp. Nothing works. We can print a test page from the server to the client computer just fine, but it seems from remoteapp we cannot. We have also tried installing the 32 bit drivers on the 64 bit machine as both the primary and secondary drivers but cannot get them to install. Suggestions please? We've been going crazy over this issue.

  Read the article

• Make BIND use DHCP DNS as backup

  - by cainmi

  I run BIND locally on my OS X machine, to enable wildcard Apache vhosts, which requires setting the DNS server for all network interfaces to 127.0.0.1. This works great, but means when I am on a network which uses an internal DNS server to route special (i.e. .companyname) URLs to a server on the network, the lookup fails. I tried adding both 127.0.0.1 and the DHCP provided DNS server, but this doesn't work either. Is there a way to make BIND use the DHCP DNS server for requests it cannot resolve locally?

  Read the article

• switch duplicates packets and forward in two route

  - by sami

  there is a network including a router, two hosts and a switch which connects hosts to router. i have a virtual machine on my system. the network adapter is set to act as bridge. so the virtual machine and real OS are my 2 hosts on different LAN. they use one network card and are connected to a switch. when each of host send a packet to the other one, the switch duplicate the packet and forward it to both router and the other host. how can I solve the duplicate packet problem? Thanks.

  Read the article

• How can I make the NetworkManager work?

  - by Yang Jy

  I am running a version of RHCE6 on my laptop, and lately I've been trying various stuff about network configuration through command line. Last night, I tried removing the NetworkManager using "yum remove NetworkManager" from the system, so that I could have more control of the network through the command line. But the result is, I didn't manage to configure the wireless connection through wpa_supplicant, and I need wireless connection during my travel to another place. So I need the wireless function back as soon as possible. I typed " yum install NetworkManager", some version installed, but I don't get to have an icon on the taskbar, and of course, the network doesn't work. The package I previously removed(about 24MB) was much larger that the one I just installed(about 2MB), so I think some dependencies must be missing. How could I install all these dependencies? Please help!

  Read the article

• No Other User In Task Manager Users Tab Windows 7

  - by Samuel Adam

  I want to ask why there is only me on Task Manager's Users tab. Originally I wanted to be able to chat with other clients on my local network using msg command, but I can't found any other user. How to see other users on the same network? I use Work Network, and all of the users is using wifi to connect. I googled about it, but no information is close enough. As much as a newbie question it sounded, I really appreciate any help. Thank you ! :)

  Read the article

• Set Valid IP On Vmware Vm's Help Please

  - by Shahin At

  I Have a VPS.And i on my vps installed vmware workstation version 9.now i have 3 valid ip's: XXX.152.193.66 XXX.152.193.101 XXX.152.193.103 Gateway: XXX.152.193.65 now tow ip's set in host and i want to 1 ip set on vm. network vm is bridge and set ip on vm but this ip from out of internal network not ping and in vm not ping to gateway. What can I do to solve this problem? my ip is unassigned and only set on vm and use bridge network mode.and gw,mask,dns is set.but not ping. i set this ip on host and without problems is worked, But I do not know why on vm not worked. my host OS Is Windows Server 2003 and firewall is off and RRAs(routing and remote access) For VPN service is Enable. Do not host or virtual machines to create a IP route?

  Read the article

• what are the vulnerabilities installing openvpn client on a customer's unattended server?

  - by senorsmile

  We run Pfsense as our primary firewall. We also have OpenVPN server running on that box to allow us to remotely connect to our network. My question is: if we have a customer's mostly unattended server that we want to access remotely, what security vulnerabilities are there to installing openvpn on the customer's server as a client connecting to our network. Presumably, we would want to limit/restrict that server's access to the rest of our network. How do we lock openvpn down and are there ways to detect abnormal activity coming from an openvpn client?

  Read the article

• Taking stock of an existing ASA Firewall

  - by Nate

  Imagine you are given an existing network using an ASA firewall. The network works, but you aren't sure of anything else. The firewall may be completely improperly configured, with "outside" actually being inside and "inside" actually being outside, for all you know. My question is this: what are the commands to take stock of an existing ASA firewall setup? With only CLI access, how do I figure out: What interfaces are available The names of the interfaces The security levels attached to the interfaces The access-lists attached to the interfaces, including rules and directions I know how to set these things (interface, nameif, security-level, and access-list/access-group), but I don't know how to figure them out given an existing system. On a related note, is there anything else that I should worry about checking to make sure that the network isn't wide open? Thanks!

  Read the article

• Tunneling over HTTP

  - by Morgan

  Hello, I have a network at work that is locked behind a firewall and Internet connection is available only by using a proxy server. At work, I can connect to databases that are distributed across the network. However, at home, I cannot connect to the proxy server or the databases. How can this be done? I can access my workstation via LogMeIn, so I can install anything on it. I thought of installing some kind of tunneling mechanism in my workstation. Then, at home, I could connect to this mechanism, which would in turn do the required connections. So essentially, what I'd like to do can be represented by the following diagram: Home = Workstation = Database. For example, whenever I connect to, say, 10.140.0.1:1234 at home, this would be redirected to 10.140.0.1:1234 of my Workstation, because 10.140.0.1:1234 is only available through the corporate network. NOTE: I'm using Windows XP.

  Read the article

• Asus EEE PC 1005HA (XP Home) refuses to connect to Virgin Mobile MiFi

  - by Dennis Wurster

  My client has an Asus EEE PC model 1005HA, and we're attempting to connect it to the WiFi network created by a VirginMobile MiFi unit. They also have a MacBook Pro with Snow Leopard that has absolutely no issue connecting to the MiFi. The specific symptom is that the netbook fails to lease an IP address from the MiFi unit. I supply the 12-digit numerical password (WPA) to the netbook, it throws a 'waiting for network' dialog with an indeterminate progress indicator, and then times out. Update: We've determined that this behavior has stopped when the EEE PC and the MiFi unit were taken out of the client's home, and to a different home that didn't have an existing wifi network. Similarly, when taken to a third location that didn't have wifi, the EEE PC and MiFi got along swimmingly. My current theory is that the existing wifi networks and the wifi leg of the MiFi unit are on the same channel and competing with one another. Perhaps the MacBook Pro has the capability to overcome this interference, while the EEE PC doesn't.

  Read the article

• Can only connect to IIS site through localhost

  - by Rembrandt Q. Einstein

  I'm building a web service for my company's iPhone application, and everything's been working smoothly by running tests through localhost on the development machine. I'm now in the phase where I need to test connections from other computers within the network, and any connection other than localhost gives me a 404. My internal IP, 127.0.0.1, and computername all get 404 when connecting from any computer, either the one the site's hosted on or any others on the network. Telnet can get through to port 80, and I've temporarily disabled all firewalls on this machine (I do not have control over the external firewall, but I'm only testing connections within the network) Does anyone have a clue why this is happening? I was able to connect to the web service from other computers when hosted on a Mac via Apache, but because I'm now using a SQL Server connection I'm restricted to using IIS for Windows Authentication. Googling only provided answers related to firewalls, and mine is disabled note: I cannot use Anonymous Authentication, but even in testing that it did not affect the issue.

  Read the article

• Using Hamachi VPN to connect to Linux VM at home

  - by Cameron Verotti

  I have a CentOS 5.10 Linux box at home running on VMWare, with Windows 2008 as the host. I have set up a Hamachi VPN so that I can connect to the Host server from work, I attempted to add a second VNIC to the VM and bridged it to the hamachi Network Interface. I spun up the VM and checked eth1 with ifconfig and its throwing me a ipv6 address not a ipv4. I want to hook this VM up so that I can run a ssh command from work to the VM. MY network at home is all on Local 198.168.. hence the need to make a VPN network like Hamachi. I cannot seem to find anything that tells me or helps me with tunneling my Linux VM via Hamachi. Any help would be fantastic!

  Read the article

• Access Configuration Page of Modem (in bridge mode) through router

  - by Ujjwal Singh

  Given the Network Configuration: Internet (121.243.x.y/27) | (121.243.x.z) Static : Public Global IP Modem Bridge Mode | WiMAX (192.168.1.1/24) +169.254.1.1/24 : Modem Configuration Page | (192.168.1.2) Router DLink DIR 615 | Ethernet + WiFi (192.168.0.1/24) | Local network (192.168.0.2) Workstation Ethernet | no WiFi Is there any way, maybe using Routing Tables, to access the Modem configuration page at 169.254.1.1 from my local network, using a Windows 7 PC? Note that the modem is currently able to display its configuration page at 169.254.1.1, i.e. even while it is in bridge mode.

  Read the article

• Making document storage in Sharepoint a breeze (leave the Web UI behind)

  - by deadlydog

  Hey everyone, I know many of us regularly use Sharepoint for document storage in order to make documents available to several people, have it version controlled, etc.  Doing this through the Web UI can be a real headache, especially when you have multiple documents you want to modify or upload, or when IE isn’t your default browser.  Luckily we can access the Sharepoint library like a regular network drive if we like. Open Sharepoint in Internet Explorer (other browsers don’t support the Open with Explorer functionality), navigate to wherever your documents are stored, choose the Library tab, and then click Open with Explorer. This will open the document storage in Explorer and you can interact with the documents just like they were on any other network drive J  This makes uploading large numbers of documents or directory structures super easy (a simple copy-paste), and modifying your files nice and easy. As an added bonus, you can drag and drop that location from the address bar in Explorer to the Favorites menu so that it’s always easily accessible and you can leave the Sharepoint Web UI behind completely for modifying your documents.  Just click on the new favorite to go straight to your documents.   You can even map this folder location as a network drive if you want to have it show up as another drive (e.g N: drive). I hope you found this as useful as I did

  Read the article

• Rate of UDP packet loss over WLAN

  - by Martin

  While testing something with TFTP I noticed lots of timeouts (and slow speed as result) when I used my WLAN - and no problems when using a network cable. A quick test program sending/receiving UDP revealed that there are about 3-5% packets lost. While it's obvious that WLAN has to be less reliable than LAN, I have no knowledge what loss rates are considered 'normal' - and when there is a need to further investigate the network infrastructure. Are there 'typical' packet loss rates on WLAN (and other network technologies e.g. PowerLAN, WAN, ...? Thanks

  Read the article

• How to hide keyboard layout shortcut from Unity top panel?

  - by user67715

  I'm using Ubuntu 12.04 together with X Neural Switcher, which is a program for the automatic switching of the keyboard layout. The switcher goes with a GUI called gXNeur. The GUI places an applet icon to the Unity top panel (the gXNeur had to be whitelisted for the icon to become visible) that help a lot to configure and make urgent changes in the rules that the program uses. But after the icon is whitelisted I'm having two keyboard layout indicators in the panel (one - native, the second one - gXNeur). The native is the one I'd like to hide while gxNeur is more intuitive. Is there a way to do that? Thanks a lot for your help!

  Read the article

• Windows Vista Backups?

  - by skaz

  I am trying to configure a Windows Backup on Vista but don't see some capabilities I would expect to be there. For one, it looks like I can only select a Local Drive or a network share. I want to use a local drive, but I want to use a sub folder of one of the drives. Must I really pick the root? As a work-around, I made a network share to the local drive, thinking I could then pick network share. However, when I do this, I am prompted for credentials to hit the share, and none work. However, the share works Explorer, and it works from other computers, so the access is configured correctly. Is there any way to do what I am trying to do? Thanks.

  Read the article

• Can Squid 2.7 proxy gzipped content

  - by Tom Styles

  We have a forward proxy for our network which is Squid 2.7. This is managed for us by a third party. We noticed recently that http requests going from our network to the web were having the Accept-Encoding header removed. This was resulting in all web traffic across our network (approx 8000+ PCs) being uncompressed even though the browsers and server on each end were capable. We have asked the third party to look into this and they have said it is because Squid 2.7 does not support compression. I understand this to be true but I was under the impression that the compression happened on the webserver rather than the proxy. So... Can Squid 2.7 proxy and/or cache content that is gzipped? If it can, how/why might it be configured such that the Accept-Encoding header is being removed?

  Read the article

• Does my DLink DNS-323 need to reside on a "192.168.0.0/24" subnet?

  - by Raymond

  I've installed two brand new 2-tib drives in the DLink and plugged it in to my network. I set my router's static address table to include the MAC address of the device; however it doesn't ever "show up." Do I need to use the custom software to administer this device? Do I need to use a "192.168.0.0/24" network in order for this device to work (asking because it states that if DHCP isn't detected, it will default to an address in that range; and my network is not in that range).

  Read the article

• ubuntu 11.10 can't find wireless after waking from sleep

  - by Colleen

  I've tried a lot of proposed solutions, most of them adding files to /etc/pm/config.d, as well as WiFi stops working after waking from suspend and nothing has worked. hardware info: [colleen@colleen-HP ~]$ sudo lshw -C network [sudo] password for colleen: *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:07:00.0 logical name: eth0 version: 06 serial: 2c:27:d7:b1:ea:67 size: 10Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=N/A latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:41 ioport:4000(size=256) memory:c1404000-c1404fff memory:c1400000-c1403fff *-network description: Wireless interface product: Centrino Wireless-N 1000 vendor: Intel Corporation physical id: 0 bus info: pci@0000:0d:00.0 logical name: wlan0 version: 00 serial: 8c:a9:82:99:48:8c width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlagn driverversion=3.0.0-21-generic-pae firmware=39.31.5.1 build 35138 ip=192.168.0.4 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn resources: irq:48 memory:c5500000-c5501fff Is anyone else still having this problem? The two solutions I haven't tried are installing wicd and upgrading because I've heard both are kind of unstable/buggy and wicd frankly scares me.

  Read the article

• How do I 'see' an external USB drive connected directly to my Broadband Router?

  - by The Cougar Kid

  This is a very frustrating problem! I have a small home network with several dual boot Ubuntu / Windows computers. I have recently upgraded my Broadband connection and the new router permits the direct attachment of an external USB drive which can back up all of the household's computers. There are no problems when booted under Windows, and there were no problems with older versions of UBUNTU, but since upgrading to 11.10 I can no longer "see" the drive. I used to find it via Network / Windows Network / Home / name of Router, but under 11.10 the same method yields an error message Unable to mount location Failed to retrieve share list from server. Can anyone help please? Starting Nmap 5.21 ( http://nmap.org ) at 2011-12-21 10:06 GMT Stats: 0:02:02 elapsed; 0 hosts completed (1 up), 1 undergoing Service Scan Service scan Timing: About 50.00% done; ETC: 10:10 (0:01:56 remaining) Nmap scan report for 192.168.1.254 Host is up (0.0097s latency). Not shown: 998 filtered ports PORT STATE SERVICE VERSION 554/tcp open rtsp? 7070/tcp open realserver? Service detection performed. Please report any incorrect results at http://nmap.org/submit/ . Nmap done: 1 IP address (1 host up) scanned in 152.38 seconds sudo tail -n 30 /var/log/syslog [sudo] password for alaric: Dec 21 10:05:42 UPSTAIRS2U wpa_supplicant[882]: WPA: Group rekeying completed with 00:01:3b:8b:63:1a [GTK=TKIP]

  Read the article

• Wifi doesn't connect if I'm upstairs

  - by user11233

  Hello there, I'm finding that Wifi connects when I'm in the living room, where the internet router etc is. But if I try to connect upstairs it is a no go. Booting in Windows 7 (dual boot :D ) I find that Wifi connects. I find this very confusing and have it since the install. Please help! Kind regards. #sudo lshw -c network *-network description: Wireless interface product: PRO/Wireless 5100 AGN [Shiloh] Network Connection vendor: Intel Corporation physical id: 0 bus info: pci@0000:02:00.0 logical name: wlan0 version: 00 serial: 00:21:5d:1a:63:58 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlagn driverversion=2.6.35-26-generic firmware=8.24.2.12 ip=10.0.0.4 latency=0 link=yes multicast=yes wireless=IEEE 802.11abg resources: irq:49 memory:de200000-de201fff Hope it helps! Hello guys, just tried to connect internet upstairs and to my surprise it does connect. Don't know exactly why. Only thing I've done recently is input the codes said bij Oli. Two things I've done on my own 1: installed Jupiter and 2: installed laptop-mode-tools. I really don't know if this can effect my internet but it's the only thing I can think of. Thanks for all the help, really appreciate it :) PS If someone thinks it might be helpful for others I would like to help find a 'real' solution to this problem. Just post down what I need to post here and I will try my best to help.

  Read the article

< Previous Page | 274 275 276 277 278 279 280 281 282 283 284 285  | Next Page >