Search Results

Search found 19131 results on 766 pages for 'power options'.

Page 278/766 | < Previous Page | 274 275 276 277 278 279 280 281 282 283 284 285  | Next Page >

• Motherboard warning lights when plugging in a display port cord to graphics card?

  - by rllr

  Earlier today, my computer spontaneously shut itself off and refused to turn back on. I tested my PSU and it's operating fine. I unplugged everything and let it sit for a while and it started to make a high pitched coil whine/hiss. When I came back an hour later and plugged in only the power cord, it turned on without any issues. After some troubleshooting, I noticed my motherboard (Intel D975XBX2) has a red CPU led and VR led that come on whenever I plug my monitor into my graphics card via display port. DVI does not cause a similar issue. I was running three monitors off the card, so I need both DVI ports and the display port working. Is it likely my graphics card needs to be replaced, or should I be looking elsewhere to resolve this issue?

  Read the article

• AC/battery laptop issues(not a simple charging fix)

  - by Deric Hatchett

  Is it possible to run a laptop off the battery while the AC is plugged in? I can play games no problem while just the battery is plugged in, but obviously that means I have to let it charge after every hour or so. But, when I plug it in to charge, it can't handle any video games anymore. I thought it was the brick in the power cord going out, but I just bought a new one and it still doesn't work. The specs are actually better than the old cord. I think the problem is an over heating problem in the AC outlet, but if it charges the battery while I play, it would work just fine running solely off the battery.

  Read the article

• Scripts under pm/sleep.d are not getting called when suspending with KDE 4.3

  - by Richard Corden

  Fujitsu-Siemens H240, Slackware-current, KDE 4.3.2. I would like to perform some additional steps when my laptop suspends. I found this SU question which is very close to what I am asking, however the scripts that I placed in that directory are not being called for me. This could be a Slackware thing, or its possible that KDE has a different location for these scripts. I am suspending by using the "Suspend" radio button on the "Guidance Power Manager" dialog of KDE. Is there a standard location where I can place my scripts so they'll be run before and then after the machine has suspended?

  Read the article

• mod_rewrite with location-based ACL in apache?

  - by Alexey

  Hi. There is a CGI-script that provides some API for our customers. Call syntax is: script.cgi?module=<str>&func=<str>[&other-options] The task is to make different authentiction rules for different modules. Optionally, it will be great to have nice URLs. My config: <VirtualHost *:80> DocumentRoot /var/www/example ServerName example.com # Global policy is to deny all <Location /> Order deny,allow Deny from all </Location> # doesn't work :( <Location /api/foo> Order deny,allow Deny from all Allow from 127.0.0.1 </Location> RewriteEngine On # The only allowed type of requests: RewriteRule /api/(.+?)/(.+) /cgi-bin/api.cgi?module=$1&func=$2 [PT] # All others are forbidden: RewriteRule /(.*) - [F] RewriteLog /var/log/apache2/rewrite.log RewriteLogLevel 5 ScriptAlias /cgi-bin /var/www/example <Directory /var/www/example> Options -Indexes AddHandler cgi-script .cgi </Directory> </VirtualHost> Well, I know that problem is order of processing that directives. <Location>s will be processed after mod_rewrite has done its work. But I believe there is a way to change it. :) Using of standard Order deny,allow + Allow from <something> directives is preferable because it's commonly used in other places like this. Thank you for your attention. :)

  Read the article

• Cookie not working after mod rewrite rule

  - by moonwalker

  Hi all, I have a simple Cookie to set the chosen language: $lang = $_GET['lang']; $myLang = $_COOKIE["myLang"]; if (!isset($_COOKIE["myLang"])){ setcookie("myLang", "en", $expire); include "languages/en.php"; $myLang = "en"; }else{ include "languages/$myLang.php"; } // One year to expire $expire = time()+60*60*24*30*365; // Put $languages in a common header file. $languages = array('en' => 1, 'fr' => 2, 'nl' => 3); if (array_key_exists($lang, $languages)) { include "languages/{$lang}.php"; setcookie("myLang", $lang, $expire); $myLang = $lang; } After using some rewrite rules, it just doesn't work anymore. I tried the following: setcookie("myLang", "en", $expire, "/" , false); No luck at all. This is my .htaccess file: <IfModule mod_rewrite.c> Options +FollowSymLinks Options +Indexes RewriteEngine On RewriteBase / RewriteRule ^sort/([^/]*)/([^/]*)$ /3arsi2/sort.php?mode=$1&cat=$2 [L] RewriteRule ^category/([^/]*)$ /3arsi2/category.php?cat=$1 [L] RewriteRule ^category/([^/]*)/([^/]*)$ /3arsi2/category.php?cat=$1&lang=$2 [L] RewriteRule ^search/([^/]*)$ /3arsi2/search.php?mode=$1 [L] RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule ^u/([^/]+)/?$ 3arsi2/user.php?user=$1 [NC,L] RewriteRule ^u/([^/]+)/(images|videos|music)/?$ 3arsi2/user.php?user=$1&page=$2 [NC,L] RewriteRule ^([^\.]+)$ 3arsi2/$1.php [NC,L] </IfModule> Any idea how to solve this? I'm still new to the mod rewrite thing, so I still don't really understand the logic behind it all. Thanks for any help you can provide.

  Read the article

• JQuery autocomplete problem

  - by heffaklump

  Im using JQuerys Autocomplete plugin, but it doesn't autocomplete upon entering anything. Any ideas why it doesnt work? The basic example works, but not mine. var ppl = {"ppl":[{"name":"peterpeter", "work":"student"}, {"name":"piotr","work":"student"}]}; var options = { matchContains: true, // So we can search inside string too minChars: 2, // this sets autocomplete to begin from X characters dataType: 'json', parse: function(data) { var parsed = []; data = data.ppl; for (var i = 0; i < data.length; i++) { parsed[parsed.length] = { data: data[i], // the entire JSON entry value: data[i].name, // the default display value result: data[i].name // to populate the input element }; } return parsed; }, // To format the data returned by the autocompleter for display formatItem: function(item) { return item.name; } }; $('#inputplace').autocomplete(ppl, options); Ok. Updated: <input type="text" id="inputplace" /> So, when entering for example "peter" in the input field. No autocomplete suggestions appear. It should give "peterpeter" but nothing happens. And one more thing. Using this example works perfectly. var data = "Core Selectors Attributes Traversing Manipulation CSS Events Effects Ajax Utilities".split(" "); $("#inputplace").autocomplete(data);

  Read the article

• How do I restore a Dell Inspiron 1521 laptop to factory defaults?

  - by Solignis

  I got a Dell Inspiron 1521 laptop from a local computer store that a buddy of mine works at. When I turned it on I had come to realize it has not been wiped and reverted to factory defaults. How can revert the machine to factory defaults? I do not have any of the CDs that came with the machine, all I have is the computer and the power brick. But if it helps any I can able to get into Windows so I full access to the machine.

  Read the article

• How to ignore an error in Powershell and let it continue?

  - by Jake

  I am trying to see if a process is running on multiple servers and then format it into a table. get-process -ComputerName server1,server2,server3 -name explorer | Select-Object processname,machinename Thats the easy part - When the process does not exist or if the server is unavailable, powershell outputs a big ugly error, messes up the the table and doesn't continue. Example Get-Process : Couldn't connect to remote machine.At line:1 char:12 + get-process <<<< -ComputerName server1,server2,server3 -name explorer | format-table processname,machinename + CategoryInfo : NotSpecified: (:) [Get-Process], InvalidOperatio nException + FullyQualifiedErrorId : System.InvalidOperationException,Microsoft.Power Shell.Commands.GetProcessCommand How do I get around this? If the I would still like to get notified if the process isn't available or Running.

  Read the article

• Hiding <option>s in IE

  - by Mark

  I wrote this nifty function to filter select boxes when their value is changed... $.fn.cascade = function() { var opts = this.children('option'); var rel = this.attr('rel'); $('[name='+rel+']').change(function() { var val = $(this).val(); var disp = opts.filter('[rel='+val+']'); opts.filter(':visible').hide(); disp.show(); if(!disp.filter(':selected').length) { disp.filter(':first').attr('selected','selected'); } }).trigger('change'); return this; } It looks at the rel property, and if the element indicated by rel changes, then it filters the list to only show the options that have that value... for example, it works on HTML that looks like this: <select id="id-pickup_address-country" name="pickup_address-country"> <option selected="selected" value="CA">Canada </option> <option value="US">United States </option> </select> <select id="id-pickup_address-province" rel="pickup_address-country" name="pickup_address-province"> <option rel="CA" value="AB">Alberta </option> <option selected="selected" rel="CA" value="BC">British Columbia </option> <option rel="CA" value="MB">Manitoba </option>... </select> However, I just discovered it doesn't work properly in IE (of course!) which doesn't seem to allow you to hide options. How can I work around this?

  Read the article

• Deployment problems of asp.net 3.5 in iis 5.1

  - by peter

  i have microsoft.net 3.5 application and have IIS5.1,,for deploying website do i need to do any thing aother than this 1.In IIS i created virtual directory named SPA and i browsed in to the location where my project is lacated and i added entire project file there( Do i need to add only bin file and login page or i need to add all pages???) 2.In asp.net folder i selected tab version 2.0,, 3.when i browsed i can see all pages when i click login.aspx i am getting this error [SqlException (0x80131904): User does not have permission to perform this action.] System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +821651 System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +186 System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) +1932 System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK) +33 System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) +172 System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart) +381 System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +181 System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +173 System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +133 System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +30 System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +424 System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66 System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +494 System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82 System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105 System.Data.SqlClient.SqlConnection.Open() +111 ChatTool.LoginForm.Page_Load(Object sender, EventArgs e) in D:\Chat tool_Ameya\ProjectCode\Unisys Project Testing\Unisys Project\Login.aspx.cs:25 System.Web.Util.CalliHelper.EventArgFunctionCaller(IntPtr fp, Object o, Object t, EventArgs e) +15 System.Web.Util.CalliEventHandlerDelegateProxy.Callback(Object sender, EventArgs e) +33 System.Web.UI.Control.OnLoad(EventArgs e) +99 System.Web.UI.Control.LoadRecursive() +47 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1436

  Read the article

• Can't get PHP script to run when launched from Aptana Studio

  - by samuel

  I've been using notepad++ for web development (currently html, css, and some php and mysql). I decided to dive into an IDE to see if I could cut down on development time and have more power than notepad++. I grabbed Aptana yesterday and, after harassing it for a few hours, have finally gotten everything up and running. The only problem is that my web pages, which are .php's, do not execute any of their included .php code in the browser. as an example: <?php echo "IT WORKS WOOO"; ?> ought to print IT WORKS WOOO smack in the middle of my blank test page, and yet it does not. I checked to see if I had somehow forgotten how to do an echo statement and ran it on my desktop, using notepad++, and it worked just fine. I have the php plugin, have used the php perspective to write it and have launched it as a php web page, but nothing makes it execute the php within. Any ideas?

  Read the article

• Is There a More Efficient Way to Write Nested While Loops?

  - by Ryan

  The code below shows nested while loops, but it's not the very efficient. Suppose I wanted to extend the code to include 100 nested while loops. Is there a better way to accomplish this task? <?php $count = 1; $num = 1; $options=3; while ( $num <=$options ) { echo "(".$num . ") "; $num1 = 1; $options1=3; while ( $num1 <=$options1 ) { echo "*".$num1 . "* "; $num2 = 1; $options2=3; while ( $num2 <=$options2 ) { echo "@".$num2 . "@ "; $num3 = 1; $options3=3; while ( $num3 <=$options3 ) { echo $num3 . " "; $num3++; $count++; } echo "<br />"; $num2++; } echo "<br />"; $num1++; } echo "<br />"; $num++; } echo $count; ?>

  Read the article

• Mac OS X Server 10.6.6 "disables" CPU in VMware Fusion

  - by wjlafrance

  Hello! I installed Mac OS X Server 10.6.0 in VMWare Fusion the other night and it worked perfectly, until I ran Software Update. I upgraded to 10.6.6 through the combo updater, and now when I start the VM it says: "The CPU has been disabled by the guest operating system. You will need to power off or reset the virtual machine at this point." I've switched the operating system in the options to OS X Server 32bit, 64bit, and even to Windows 7, and nothing has worked. Does anyone have any ideas?

  Read the article

• How to tell if OpenGL is really working in Ubuntu 10.04

  - by Jonathan

  I have a lenovo S9e running Intel integrated graphics. Here is my lspci output related to the graphics: 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03) Subsystem: Lenovo Device 3870 Flags: bus master, fast devsel, latency 0 Memory at f0580000 (32-bit, non-prefetchable) [size=512K] Capabilities: [d0] Power Management version 2 I want to know how I can make sure OpenGL support is running in full on an Ubuntu 10.04 installation. I have a few hints to think that it is not: The "Desktop Effects" will not load Apps such as stardock, when attempting to use OpenGL rendering, will display black boxes instead of transparency In the games Pioneers, the number-tile icons are suspiciously just black circles Windows games running with Wine will only support software rendering, not hardware rendering When I boot into a Knoppix LiveCD, the desktop effects do work, splendidly, meaning compiz detects my computer as capable. My problem with troubleshooting is that Canonical has basically eliminated the conf-file-based mechanism of X11 as far as I can tell, thus making it even harder to ensure graphics modules are loading properly. How do I debug and test OpenGL on m Ubuntu 10.04 installation?

  Read the article

• Clean toshiba a300d 14r

  - by pask

  Hi all, i'm not able to open my notebook, a toshiba a300d-14r. Googling i don't find any useful information... This is official site: http://it.computers.toshiba-europe.com/innovation/jsp/SUPPORTSECTION/discontinuedProductPage.do?service=IT&PRODUCT_ID=1056713&DISC_MODEL=1#0 Anyone have an idea to open it. The fan goes crazy when power on and i suppose that is full of dusty. I need to clean the fan... Is there a guide or a useful information to do it? thanks, A

  Read the article

• Clean toshiba a300d 14r

  - by pask

  Hi all, i'm not able to open my notebook, a toshiba a300d-14r. Googling i don't find any useful information... This is official site: http://it.computers.toshiba-europe.com/innovation/jsp/SUPPORTSECTION/discontinuedProductPage.do?service=IT&PRODUCT_ID=1056713&DISC_MODEL=1#0 Anyone have an idea to open it. The fan goes crazy when power on and i suppose that is full of dusty. I need to clean the fan... Is there a guide or a useful information to do it? thanks, A

  Read the article

• Laptop charger dying after plugging in?

  - by Corey

  My laptop charger's transformer has a green light on it that indicates that it's plugged in and working. When I plug it into the wall, the light goes on as expected. As soon as I plug it into the laptop, the light immediately turns off and my laptop doesn't get any charge. After that, the charger's light doesn't turn green again, even though it is still plugged into an outlet. I need to unplug it from the wall and wait a few minutes. It's strange - unplugging and immediately re-plugging it does not bring back the charge; I have to wait. Is this a charger issue or a laptop issue? Edit: Hooked the charger into a voltmeter and power went through fine. I guess this means that it's a short in my laptop itself. What are my options now?

  Read the article

• How to get external 2.5 inch HD enclosure get recognised

  - by fireBand

  I am completely out of ideas. I have 2.5inch HDD from my old laptop, I have tried with 2 different HDD enclosures but my desktop does not recognize it. Not even showing in the disk management or BIOS. The HDD works fine if I use in a 3.5 inch enclosure with external power. I have tried 3 different Y USB cables. I have also got a 7 port self powered 2A USB hub. I have updated my chipset drivers as well. The problem is with my desktop , the enclosures work fine with my new laptop. Anything else that I should try? Thanks in advance.

  Read the article

• "Disk Not Found" Error when trying to install iso image of CentOs on ESXI using VSphere

  - by kamal

  When trying to install CentOs setup as an iso image on datastore, i get an error : "Disk Not Found". I am using ESXi 4.1 as host VM. Is there a way to attach DVD/CD as iso image ? I tried "Connect at Power on" Checked and Connect CD/DVD on the VSphere Console, but i still am unable ot get the iso image recognized as a DVD mounted image: Solved: if i look at the image size, it was 11 MB, so it WAS a boot iso, but nithing else, if we compare it with other boot images with complete iso's therein lies the solution. This boot.iso was from rBUILD/Conary packaging

  Read the article

• function not working in production mode

  - by maps

  I am using the rvideo gem to transcode files to a .flv format. class Video < ActiveRecord::Base include AASM aasm_column :status aasm_initial_state :initial aasm_state :initial aasm_state :converting, :exit => :transcode aasm_state :transfering , :exit => :send_s3 aasm_state :completed aasm_state :failed aasm_event :convert do transitions :from => [:initial], :to => :converting end aasm_event :transfer do transitions :from => [:converting], :to => :transfering end aasm_event :complete do transitions :from => [:transfering], :to => :completed end aasm_event :error do transitions :from => [:initial, :converting, :transfering, :completed] end has_attached_file :asset, :path => "uploads/:attachment/:id.:basename.:extension" def flash_path return self.asset.path + '.flv' end def flash_name return File::basename(self.asset.path)# + '.flv' end def flash_url return "#{AWS_HOST}/#{AWS_BUCKET}/#{self.flash_name}" end # transcode file def transcode begin RVideo::Transcoder.logger = logger file = RVideo::Inspector.new(:file => self.asset.path) command = "ffmpeg -i $input_file$ -y -s $resolution$ -ar 44100 -b 64k -r 15 -sameq $output_file$" options = { :input_file => "#{RAILS_ROOT}/#{self.asset.path}", :output_file => "#{RAILS_ROOT}/#{self.flash_path}", :resolution => "320x200" } transcoder = RVideo::Transcoder.new transcoder.execute(command, options) rescue RVideo::TranscoderError => e logger.error "Encountered error transcoding #{self.asset.path}" logger.error e.message end end The input file is added to the asset directory, but I never get an outputted file. On the view page aasm hangs on "converting".

  Read the article

• Questions on method to use: Facebook Business Page with Flash or Facebook Application?

  - by Jay

  Hi there, I'm new to Facebook's Graph API / FBML / etc. So if at any point in my post I make a mistake or wrong assumption, please point them out. One of the projects that I am working on has a need to get data/info from an existing web site in addition to the friends list and such that FB can provide. This is for a platform that allows people from all over the world to help out in small scale projects that will benefit various communities. These projects are usually to help out people in unfortunate / less than ideal situations / living conditions so that their environment improves. You can read about it in detail at http://www.getitdone.org. The initial idea was to develop a Business Page (this is the same as a Fan Page right?) for each Project with a Static FBML tag to do the displaying. However, iframes are not allowed in Pages (as far as I know, iframes are only allowed in an FB Application). So it is no longer possible to get data from the web site to be displayed in the FB Page. So one of the options is to embed a Flash in the Page's Tab. I am fairly certain that the Flash can retrieve data on the User's friends and connections in an Application's context (because of all of those darn FB games that I'm addicted to :p). However, I would like to confirm if it can do the same if it's embedded in a Business Page's Tab. Could someone please confirm on this issue? The other option that we arrived at was (if the earlier options fails) to have an Application built instead. However, this means that we would need to create an Application for each Project. Not an ideal situation. Is there any other option that we have missed that can help us achieve the desired result with as little hassle as possible? Any help that you can provide on this matter is most welcome. Thank you.

  Read the article

• VMWare Converter recommendations

  - by Tank Szuba

  I have two Ghost 14 backups of my machine. One for the machine fully configured with apps after and XP install and one of the last update before i re-imaged it (it's XP, I re-image about once every six months). I recently wanted to try simply using my initial image in a virtual environment to do my testing that generally causes me to need to re-image. I used the VMWare converter to convert the Ghost images to a virtual machine to use in Virtual box but they fail to properly boot. They get stuck after the bios loads and windows begins loading. If I power down the machine and refire it it will go to the error screen in windows that asks if you would like to boot to a different mode. none selected make any difference. What are some possible errors I should look for in the conversion process or in my settings for the converter?

  Read the article

• Remote access not working without connected monitor

  - by winSharp93

  I am trying to configure a Windows Server 2008 as a Home Server for my personal use (mainly for storing documents, hosting source-control, etc.). The "server" consists of an Intel Atom 2700DC board and an Intel SSD. Configuring remote access to the server, I am confronted with a very strange problem: As long as a monitor is connected to my server, remote access works without any problems. However, when no monitor is connected at boot-time, remote access simply won't work (I keep getting errors when trying to connect that the remote server was not found or that remote access is disabled). Windows definitely boots when no monitor is connected as I receive a message asking me whether to enter safe mode when booting after powering the server down by plugging the power cord. When I plug in a monitor after boot, it stays turned off and remote desktop connections still fail. Do you have any ideas about what I could try?

  Read the article

• Ubuntu PowerEdge T110

  - by Josh

  I just got a Dell PowerEdge T110 server. I moved the boot order to CD - HDD - NIC, then installed Ubuntu 10.10, Desktop Ed. I chose install alongside other OS (even though there was none), then chose use entire partition. It showed that Ubuntu would use 160 of the 160 available GB. It installed, updated (while installing), then said, need to eject and restart, as usual. It restarted, but to a blank screen. No output whatsoever. Not even BIOS. Just blank. The monitor isn't even woken from sleep. Power cycled, still doing it. Tested the monitor with a laptop, and it is fine. What on earth is going on here?

  Read the article

• Issue with Toshiba Satellite C50 A-1JM

  - by Nathan Hawkes

  I am having some odd problems with my Toshiba laptop. For the last two days, it has not loaded past the boot screen for hours, if at all. When I force the laptop off and switch it back on, it goes to the Preparing Automatic Repair process but will not complete the process and go to the desktop. However, this only happens when the battery is plugged in. When I remove the battery and run the laptop on power, it works without issue. Would this be a battery issue (given it works without the battery) or a hard drive issue (given it won't get past the boot screen)? If neither, what would you suggest as a solution?

  Read the article

< Previous Page | 274 275 276 277 278 279 280 281 282 283 284 285  | Next Page >