Search Results

Search found 7951 results on 319 pages for 'quick joe smith'.

Page 278/319 | < Previous Page | 274 275 276 277 278 279 280 281 282 283 284 285  | Next Page >

• Developing on a windows machine that interacts with a linux system

  - by Jamie

  Sorry for the bad title (couldn't think of a better way to describe it) I have a windows machine which I do development on. However, I have a new project which needs to interact with a linux system (executing linux commands etc.). So, obviously I can't do development on my windows machine..and I don't wish to code on the dev machine, svn commit and then svn update it on the linux machine. Is there a way where any changes I make on my dev machine will be quickly mirrored to the linux machine? SVN is not a very quick alternative and of course some changes will be very minor. Any ideas? A network share I guess....but that's not very pretty (bit slow too). As fellow developers I would like to know if you've been in a similar situation and how you've resolved it. On a furthernote, I can't just install Ubuntu as my development machine and mirror the commands, applications etc. from the linux machine because it's a cluster 'master' machine and so therefore it has quite a special configuration. Thanks guys! EDIT: I've also thought about having web services on the linux machine and then just calling them from code thus seperating platform development dependency. What do you think about that too? thanks

  Read the article

• Magento 1.4 - how to show html on product view?

  - by Sam

  Hi All The new version of Magento, 1.4, has it's own WYSIWYG editor, which can be enabled for any product attribute. However, if it is enabled, say for the additional info attribute, if you view the product page the html will be escaped, so you see all the tags (< p , < ul etc). If you change the following in template/catalog/product/view.phtml, you can get the "Quick Overview" and "Additional Information" sections to correctly show the html: <?php echo nl2br($this->htmlEscape($_product->getShortDescription())) ?> to <?php echo $_product->getShortDescription() ?> However, the additional info section is added via template/catalog/product/view/attributes.phtml using the following line, and I can't figure out how to get it to show the html correctly: <?php echo $_helper->productAttribute($_product, $_data['value'], $_data['code']) ?> This references Mage_Catalog_Block_Product_View_Attributes, and if I go to that file and change the following, it works: $value = $this->htmlEscape($value); to $value = value; But is there anyway to do this without overiding this core file with a local version?

  Read the article

• What is the Pythonic way to implement a simple FSM?

  - by Vicky

  Yesterday I had to parse a very simple binary data file - the rule is, look for two bytes in a row that are both 0xAA, then the next byte will be a length byte, then skip 9 bytes and output the given amount of data from there. Repeat to the end of the file. My solution did work, and was very quick to put together (even though I am a C programmer at heart, I still think it was quicker for me to write this in Python than it would have been in C) - BUT, it is clearly not at all Pythonic and it reads like a C program (and not a very good one at that!) What would be a better / more Pythonic approach to this? Is a simple FSM like this even still the right choice in Python? My solution: #! /usr/bin/python import sys f = open(sys.argv[1], "rb") state = 0 if f: for byte in f.read(): a = ord(byte) if state == 0: if a == 0xAA: state = 1 elif state == 1: if a == 0xAA: state = 2 else: state = 0 elif state == 2: count = a; skip = 9 state = 3 elif state == 3: skip = skip -1 if skip == 0: state = 4 elif state == 4: print "%02x" %a count = count -1 if count == 0: state = 0 print "\r\n"

  Read the article

• How to Treat Race Condition of Session in Web Application?

  - by Morgan Cheng

  I was in a ASP.NET application has heavy traffic of AJAX requests. Once a user login our web application, a session is created to store information of this user's state. Currently, our solution to keep session data consistent is quite simple and brutal: each request needs to acquire a exclusive lock before being processed. This works fine for tradition web application. But, when the web application turns to support AJAX, it turns to not efficient. It is quite possible that multiple AJAX requests are sent to server at the same time without reloading the web page. If all AJAX requests are serialized by the exclusive lock, the response is not so quick. Anyway, many AJAX requests that doesn't access same session variables are blocked as well. If we don't have a exclusive lock for each requests, then we need to treat all race condition carefully to avoid dead lock. I'm afraid that would make the code complex and buggy. So, is there any best practice to keep session data consistent and keep code simple and clean?

  Read the article

• Retaining Managed objects - more general retaining objects

  - by Luuk D. Jansen

  A quick question regarding Managed Objects. I created an Array with Managed Objects (in Object 1: TableViewConbtroller), and pass one of those objects to another class/object (object 2: TableCell). The original array should still be retained in the original caller class. Then Object 2 is released, does that mean that that particular item in the array is released as well, as the reference to it in Object 2 was released? I am trying to better understand how to work with ManagedObjects as I get 'Object was released' errors. [EDIT] After some experimenting I came across the following scenario: I have the main AppDelegate. In a different class I create an AppDelegate to obtain the ManagedObjectContext. appDelegate = (iDomsAppDelegate *)[[UIApplication sharedApplication] delegate]; [self setContext:[appDelegate managedObjectContext]]; When the class is finished, and I release it, the variable in the class 'appDelegate' is also released. But then the ManagedObjectContext is closed, and obvious any future attempt to use it will cause a crash. So should I leave the appDelegate unreleased? This comes to the same question as the above about when and how to release in those situations where an objects is used from another class. I think a way of putting it is, how to know when you own an object and when not.

  Read the article

• Box2D in Flash runs quicker when drawing debug data than not

  - by bowdengm

  I've created a small game with Box2d for AS3 - I have sprites attached to the stage that take their position from the underlying Box2d world. These sprites are mostly PNGs. When the game runs with DrawDebugData() bening called every update, it runs nice and smoothly. However when I comment this out, it runs choppily. In both cases all my sprites are being rendered. So it seems that it's running faster when it's drawing the debug data additionaly (i.e. my sprites are on the screen in both cases!) What's going on? Does drawing the debug data flick some sort of 'render quick' switch? If so, what's the switch!? I can't see it in the Box2D code. function Update(e){ m_world.Step(m_timeStep, m_velocityIterations, m_positionIterations); // draw debug? m_world.DrawDebugData(); // with the above line in, I get 27fps, without it, I get 19fps. // that's the only change that's causing such a huge difference. doStuff(); } Interestingly, If i set the debug draw scale to something different to my world scale, it slows down to 19fps. So there's something happening when it draws the boxes under my sprites causing it to run quicker.. Cheers, Guy

  Read the article

• Reference to the Main Form whilst trying to Serialize objects in C#

  - by Paul Matthews

  I have a button on my main form which calls a method to serialize some objects to disk. I am trying to add these objects to an ArrayList and then serialize them using a BinaryFormatter and a FileStream. public void SerializeGAToDisk(string GenAlgName) { // Let's make a list that includes all the objects we // need to store a GA instance ArrayList GAContents = new ArrayList(); GAContents.Add(GenAlgInstances[GenAlgName]); // Structure and info for a GA GAContents.Add(RunningGAs[GenAlgName]); // There may be several running GA's using (FileStream fStream = new FileStream(GenAlgName + ".ga", FileMode.Create, FileAccess.Write, FileShare.None)) { BinaryFormatter binFormat = new BinaryFormatter(); binFormat.Serialize(fStream, GAContents); } } When running the above code I get the following exception: System.Runtime.Serialization.SerializationException was unhandled Message=Type 'WindowsFormsApplication1.Form1' in Assembly 'GeneticAlgApp, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null' is not marked as serializable. So that means that somewhere in the objects I'm trying to save there must be a reference to the main form. The only possible references I can see are 3 delegates which all point to methods in the main form code. Do delegates get serialized as well? I can't seem to apply the [NonSerialized] attribute to them. Is there anything else I might be missing? Even better, is there a quick method to find the reference(s) that are causing the problem?

  Read the article

• How should I handle multiple links ot the same page with different Query Strings

  - by RandomBen

  In the website I am working on, there is a product page with 8 tabs on it, showing different aspects of the product. There are quick links on other pages within the site that take you to the page and to a specific link specified by a query string. For example the base page would be www.example.com/Product1. And then there are links like this: www.example.com/Product1?tab=CADDrawing www.example.com/Product1?tab=Schematics www.example.com/Product1?tab=Reviews My concern is that Google sees each of these links as a different URL but they aren't and the data on the page is 100% the same. Is there any easy way to make it so Google either knows that www.example.com/Product1 is the base page or doesn't follow the links with Query Strings? I thought about using rel="nofollow" but that seems like it would actually hurt my page ranking. Most of the websites, including Googles on webmaster pages, is unclear. The other option is to add the rel="canonical" to the pages that have a query string but not to the base page. Does that succeed in stopping all of the noisy links?

  Read the article

• When to use ellipsis after menu items

  - by Svish

  In pretty much all applications that have a menu bar, some of the items have an ellipsis (...) after them, and some don't. Is there a well known convention on when to put that ellipsis there and when not to? When do you do it? Do you do it? I have looked at various windows applications, and this is what I have come to: Ellipsis Menu items which opens a form that require user input to do something (Replace, Go to, Font) No ellipsis Menu items which just does something (Cut, Paste, Exit, Save) Menu items which opens a form that does not require user input (About, Check for Updates) But then there always seems to be menu items that doesn't follow this rule. For example the Help items (How do I, Search, Index) and the Find and Replace (Quick Find, Find in Files, Find Symbol) in Visual Studio. So after thinking about it a bit more I know think this might be the thing: Ellipsis Menu items that will definitely open a modal window. No Ellipsis Menu items that opens a non-modal window. Menu items that doesn't open any window. Menu items that most likely won't open a modal window (Like Save, which does open a modal window if you haven't saved before or something like that, but otherwise don't) What do you guys think?

  Read the article

• PHP - Code Sample - Polymorphism Implementation - How to allow for expansion?

  - by darga33

  I've read numerous SO posts about Polymorphism, and also the other really good one at http://net.tutsplus.com/tutorials/php/understanding-and-applying-polymorphism-in-php/ Good stuff!!! I'm trying to figure out how a seasoned PHP developer that follows all the best practices would accomplish the following. Please be as specific and detailed as possible. I'm sure your answer is going to help a lot of people!!! :-) While learning Polymorphism, I came across a little stumbling block. Inside of the PDFFormatter class, I had to use (instanceof) in order to figure out if some code should be included in the returned data. I am trying to be able to pass in two different kinds of profiles to the formatter. (needs to be able to handle multiple kinds of formatters but display the data specific to the Profile class that is being passed to it). It doesn't look bad now, but imagine 10 more kinds of Profiles!! How would you do this? The best answer would also include the changes you would make. Thanks sooooooo much in advance!!!!! Please PHP only! Thx!!! File 1. FormatterInterface.php interface FormatterInterface { public function format(Profile $Profile); } File 2. PDFFormatter.php class PDFFormatter implements FormatterInterface { public function format(Profile $Profile) { $format = "PDF Format<br /><br />"; $format .= "This is a profile formatted as a PDF.<br />"; $format .= 'Name: ' . $Profile->name . '<br />'; if ($Profile instanceof StudentProfile) { $format .= "Graduation Date: " . $Profile->graduationDate . "<br />"; } $format .= "<br />End of PDF file"; return $format; } } File 3. Profile.php class Profile { public $name; public function __construct($name) { $this->name = $name; } public function format(FormatterInterface $Formatter) { return $Formatter->format($this); } } File 4. StudentProfile.php class StudentProfile extends Profile { public $graduationDate; public function __construct($name, $graduationDate) { $this->name = $name; $this->graduationDate = $graduationDate; } } File 5. index.php //Assuming all files are included...... $StudentProfile = new StudentProfile('Michael Conner', 55, 'Unknown, FL', 'Graduate', '1975', 'Business Management'); $Profile = new Profile('Brandy Smith', 44, 'Houston, TX'); $PDFFormatter = new PDFFormatter(); echo '<hr />'; echo $StudentProfile->format($PDFFormatter); echo '<hr />'; echo $Profile->format($PDFFormatter);

  Read the article

• Android SDK not recognizing debug-able device.

  - by kal.zekdor

  I'm new to Android development, and am attempting to run a test application on my actual device. I followed the instructions at http://developer.android.com/guide/developing/device.html (and related links), but the Android Debug Bridge (adb) doesn't recognize my connected device. Some quick background info, I'm running WinXP, developing with Eclipse, with a Motorola Droid running Android 2.1 as my physical device. An overview of the steps I've taken: Installed the Android SDK, downloading all necessary packages. Enabled USB Debugging on my device. Connected Device via USB, installing the driver from the SDK folder. I'll stop here (though I continued to setup my application to be debug-able in Eclipse), because I at this point I noticed a problem. Running "sdk\tools\adb devices" at this point (at least, by my understanding), should list my device as connected. However, running this yields only: List of devices attached My device recognizes that it's connected to a computer in debug mode, and my computer recognizes the device. However, I can't seem to get the sdk to recognize it. I'll leave out the steps I used to setup Eclipse for debugging on a device, as it doesn't seem relevant to the problem. I'll include them if requested. If anyone has any ideas, I'd greatly appreciate some assistance. Thanks in advance for your time.

  Read the article

• Advise guidance on how to form this jQuery script for show/hide fade element

  - by Rick

  Hey guys.. I basically have several links on the left side of the screen and on the right is a preview window. Below the preview window is another box for the affiliate link code. So what I am trying to do is create an affiliate page where you choose the banner size on the left by clicking on the link and on the right you see it dynamically change to the banner size and the code changes accordingly as well. So far I have the following code and it works but it seems very very cumbersome and bloated. Can you see if I can trim this down? jQuery(".banner-style li").click(function() { jQuery(".banner-style li").removeClass("selected"); jQuery(this).addClass("selected"); var $banner = jQuery(this).attr("class"); $banner = $banner.replace(" selected",""); jQuery(".preview img").fadeOut('fast',function() { jQuery(".preview img").attr("src", "http://localhost/site/banners/"+$banner+".jpg") .fadeIn('slow'); }); jQuery(".code p").removeClass('hide').hide(); jQuery(".code p."+$banner).show(); }); Also to note the funny thing is in FF, when you click for the first to on any link, the original image on the right fades out and in real quick and then it loads the "clicked" image. This does not happen in other browsers...

  Read the article

• "Subforms" associated with tree view in VB

  - by knomdeguerre

  I am using VB Express 2008 to demonstrate my ideas for an improved UI for an existing product for my colleagues at work. The current UI has a certain page with ten tabs, allowing the user to define up to ten "things". The available choices for each of the ten "things" are all the same. On each of the ten tabs, there is a checkbox to enable that definition. Generally, a user will never use more than 5 or 6 unique definitions, the rest will remain disabled. So far, my prototype has a tree view control with one branch to contain this list of definitions, Add and Delete buttons. My idea is: there is one sub-branch to start with (corresponding to the first tab in the current UI); if the user wants addtional definitions, they click Add and other branches are added to the tree view, up to maximum of ten. I think I should be able to create a "class" that has a sub-UI (like a sub-form in Access) along with behavior code, that can be instantiated with each press of the Add button; each instantiation's settings can be set independently and is displayed in the main UI form )in a panel or frame) when selected in the tree view. For example, suppose the user Adds to make a total of three definitions: the tree view now has three sub-branches, each of which presents the same sub-UI with settings that can be set specific to the selected sub-branch. I'm sure it's possible but not sure how to do it. I know a comprehensive "answer" might be complicated and long, but I may just need some quick hints to get underway - don't be shy! Thanks in advance!

  Read the article

• How do I create a *public* Facebook community page using the Open Graph protocol?

  - by jmbledsoe

  I am trying to integrate pages from a site I am building into the Facebook Open Graph. My goal is to create a Facebook "Community Page" for each cause in my application. I have added Open Graph tags to a page so that I can Like it in Facebook, and a community page corresponding to my cause has been added to Facebook. However, I am the only one who can see the community page, since I am its administrator. All other users are redirected to the URL of the cause itself. My community page is at: http://www.facebook.com/pages/Kings-Hospital-Garden-Short-Term-Aid/123353527700762 When fans go to this page, I would like them to see the Facebook community page rather than being redirected. In other words, I want my community page to behave like the following community page referenced in all of the Facebook documentation on the subject: http://www.facebook.com/pages/The-Rock/109550739071923 Any insight into this would be greatly appreciated. Also, I asked this same question on the Facebook Platform Developer Forum, but I suspect that the SO community may be more quick to respond.

  Read the article

• javascript hide/show tabs using JQuery

  - by JohnMerlino

  Hey all, I have a quick question of how I can use jquery tabs (you click on link button to display/hide certain divs). The div id matches the href of the link: HTML links: <table class='layout tabs'> <tr> <td><a href="#site">Site</a></td> <td><a href="#siteno">Number</a></td> </tr> <tr> <td><a href="#student">Student</a></td> <td><a href="#school">School</a></td> </tr> </table> </div> div that needs to display/hide: <div id="site"> <table class='explore'> <thead class='ui-widget-header'> <tr> <th class=' sortable'> Site </th> <th class=' sortable'> Number </th> </tr> </thead> </table> </div> Thanks for any response.

  Read the article

• How do I update a webpage with the progress of a server-side task?

  - by Jim B

  Hi everyone, I'm working on a web project that takes the results from a survey type application, and runs them through a bunch of calculations to come up with some recommended suggestions for the user. Now, this calculation might take a minute or so, so I'd like to be able to give the user some update on it's progress. Obviously, the quick and dirty solution would be to put up a message along the lines of "Please wait while we calculate your recommendations" with a spinning gear type graphic. (or whatever, you get the point..). Once the task completes, I'd redirect to the results page. However, I'd like to do something a little more flashy. Maybe something along the lines of a progress bar, and even prompt the user with what's going on in the background. For example, give them a progress bar, with some text that says "Now processing suggestion 3 of 15; Multi-Vitamin" Any suggestions on how I could set this up? One way I'm thinking of doing it is to write the progress of the calculation method to the HttpContext, and slap up an update panel and timer that would show/refresh this info. I've also checked out maybe building a web service/method, and then poll that at some interval. Has anybody done something similar to this before? What worked for you? Thanks again! ~Jim

  Read the article

• What's an effective way to move data from one open browser tab to another?

  - by slk

  I am looking for a quick way to grab some data off of one Web page and throw it into another. I don't have access to the query string in the URL of the second page, so passing the data that way is not an option. Right now, I am using a Greasemonkey user script in tandem with a JS bookmarklet trigger: javascript:doIt(); // ==UserScript== // @include public_site // @include internal_site // ==/UserScript== if (document.location.host.match(internal_site)) { var datum1 = GM_getValue("d1"); var datum2 = GM_getValue("d2"); } unsafeWindow.doIt = function() { if(document.location.host.match(public_site)) { var d1 = innerHTML of page element 1; var d2 = innerHTML of page element 2; //Next two lines use setTimeout to bypass GM_setValue restriction window.setTimeout(function() {GM_setValue("d1", d1);}, 0); window.setTimeout(function() {GM_setValue("d2", d2);}, 0); } else if(document.location.host.match(internal_site)) { document.getElementById("field1").value = datum1; document.getElementById("field2").value = datum2; } } While I am open to another method, I would prefer to stay with this basic model if possible, as this is just a small fraction of the code in doIt() which is used on several other pages, mostly to automate date-based form fills; people really like their "magic button." The above code works, but there's an interruption to the workflow: In order for the user to know which page on the public site to grab data from, the internal page has to be opened first. Then, once the GM cookie is set from the public page, the internal page has to be reloaded to get the proper information into the internal page variables. I'm wondering if there's any way to GM_getValue() at bookmarklet-clicktime to prevent the need for a refresh. Thanks!

  Read the article

• MS SQL - Multi-Column substring matching

  - by hamlin11

  One of my clients is hooked on multi-column substring matching. I understand that Contains and FreeText search for words (and at least in the case of Contains, word prefixes). However, based upon my understanding of this MSDN book, neither of these nor their variants are capable of searching substrings. I have used LIKE rather extensively (Select * from A where A.B Like '%substr%') Sample table A: ID | Col1 | Col2 | Col3 | ------------------------------------- 1 | oklahoma | colorado | Utah | 2 | arkansas | colorado | oklahoma | 3 | florida | michigan | florida | ------------------------------------- The following code will give us row 1 and row 2: select * from A where Col1 like '%klah%' or Col2 like '%klah%' or Col3 like '%klah%' This is rather ugly, probably slow, and I just don't like it very much. Probably because the implementations that I'm dealing with have 10+ columns that need searched. The following may be a slight improvement as code readability goes, but as far as performance, we're still in the same ball park. select * from A where (Col1 + ' ' + Col2 + ' ' + Col3) like '%klah%' I have thought about simply adding insert, update, and delete triggers that simply add the concatenated version of the above columns into a separate table that shadows this table. Sample Shadow_Table: ID | searchtext | --------------------------------- 1 | oklahoma colorado Utah | 2 | arkansas colorado oklahoma | 3 | florida michigan florida | --------------------------------- This would allow us to perform the following query to search for '%klah%' select * from Shadow_Table where searchtext like '%klah%' I really don't like having to remember that this shadow table exists and that I'm supposed to use it when I am performing multi-column substring matching, but it probably yields pretty quick reads at the expense of write and storage space. My gut feeling tells me there there is an existing solution built into SQL Server 2008. However, I don't seem to be able to find anything other than research papers on the subject. Any help would be appreciated.

  Read the article

• Determining if an unordered vector<T> has all unique elements

  - by Hooked

  Profiling my cpu-bound code has suggested I that spend a long time checking to see if a container contains completely unique elements. Assuming that I have some large container of unsorted elements (with < and = defined), I have two ideas on how this might be done: The first using a set: template <class T> bool is_unique(vector<T> X) { set<T> Y(X.begin(), X.end()); return X.size() == Y.size(); } The second looping over the elements: template <class T> bool is_unique2(vector<T> X) { typename vector<T>::iterator i,j; for(i=X.begin();i!=X.end();++i) { for(j=i+1;j!=X.end();++j) { if(*i == *j) return 0; } } return 1; } I've tested them the best I can, and from what I can gather from reading the documentation about STL, the answer is (as usual), it depends. I think that in the first case, if all the elements are unique it is very quick, but if there is a large degeneracy the operation seems to take O(N^2) time. For the nested iterator approach the opposite seems to be true, it is lighting fast if X[0]==X[1] but takes (understandably) O(N^2) time if all the elements are unique. Is there a better way to do this, perhaps a STL algorithm built for this very purpose? If not, are there any suggestions eek out a bit more efficiency?

  Read the article

• jQuery "best practices" is an oxymoron [closed]

  - by n00b

  jQuery "best practices", oxymoron for several reasons sadly To speak candidly, the entire jQuery library has a HIGHLY inconsistent API, and virtually no coding standards. It's basically a subset of JavaScript, a new language if you will, which is probably the most confusing part for normal javascript developers. In my opinion, use normal JavaScript where possible to save on memory consumption. Or, better yet, use a professional tool like YUI. If you already come from a javascript background, you will appreciate it much more than jQuery because it doesn't have n00b wrappers around everything. In tools like YUI, you interact directly with the native DOM to do things, instead of a super-jQuery object that tries to do everything. I'll get voted down for saying the truth. Don't get me wrong, jQuery is cool if you wanna throw something flashy up quick, but if you're going to build a larger app you're going to need a more refined tool (especially since jQuery leaks memory like no other once you start chaining too much things). jQuery does have one of the lowest learning curves, and you won't outgrow it for awhile, but when you do it will be highly apparent and tedious to merge to something else. over 60 years programming experience someone clean this up and community wiki please

  Read the article

• Open + Save .exe file in notepad makes it corrupted

  - by Jacob Kofoed

  Hi, I just published this simple console application that is supposed to show a textbox with the value of a setting called "userID" with value 1001. This works like a charm. Now what I need is to change this value outside the editor, from notepad etc. When I open the application a lot in there is non-sence (& o! -å Þþþ,o" Ü+) etc. but with a quick (ctrl + F) I found the value 1001, and changed this to some other integer. I ran the application again, and it failed, didn't even give any userful error-message. At a point I tried just opening a newly published non-corrupted version of the application, didn't change anything, then saved from notepad, and it were also corrupted. It seems like notepad can't open some characters or something. Do I need to publish the application in some specific text-unicode language or something? Help much appreciated :) I know it sounds like a stupid application, but it is just a test of concept :) I use vb.net for this

  Read the article

• MEF instance management

  - by Lawrence A. Contreras

  I am working on application that has multiple modules and sub modules. Here's what I need to do: ModuleA has a sub module SubModuleA, SubModuleB, SubModuleC. I want to export ModuleA, SubModuleA, SubModuleB, SubModuleC. ModuleA can have multiple instances. Whenever I import ModuleA inside the sub modules, I want to get the correct instance and also when I import SubModuleA,SubModuleB and SubModuleC inside other classes. How can I manage that scenario using MEF? Do I really need to use MEF. Updated: Here's a quick example: public class School { List<Classroom> classRooms { get; set; } } [Export] public class Classroom { List<Teacher> teachers { get; set; } } public class Teacher { List<Student> students { get; set; } } public class Student { [Import] Classroom classroom { get; set; } } As you can see, I want to export the classroom class because I need to import it in the Student class, let's just say that I really need the classroom class inside the student class. I want to skip the part where we pass the classroom to the teacher and from the teacher we'll pass it to the student. But when I import classroom, I want to have the correct instance where that class room contains the teacher of the student.

  Read the article

• Modify columns in a data frame in R more cleanly - maybe using with() or apply()?

  - by Mittenchops

  I understand the answer in R to repetitive things is usually "apply()" rather than loop. Is there a better R-design pattern for a nasty bit of code I create frequently? So, pulling tabular data from HTML, I usually need to change the data type, and end up running something like this, to convert the first column to date format (from decimal), and columns 2-4 from character strings with comma thousand separators like "2,400,000" to numeric "2400000." X[,1] <- decYY2YY(as.numeric(X[,1])) X[,2] <- as.numeric(gsub(",", "", X[,2])) X[,3] <- as.numeric(gsub(",", "", X[,3])) X[,4] <- as.numeric(gsub(",", "", X[,4])) I don't like that I have X[,number] repeated on both the left and ride sides here, or that I have basically the same statement repeated for 2-4. Is there a very R-style way of making X[,2] less repetitive but still loop-free? Something that sort of says "apply this to columns 2,3,4---a function that reassigns the current column to a modified version in place?" I don't want to create a whole, repeatable cleaning function, really, just a quick anonymous function that does this with less repetition.

  Read the article

• "for" loop inside another "for" loop

  - by jnkrois

  Hello everybody. I have quick question, and I'm sure some of you guys will be able to point out what I'm doing wrong. Basically, I want to create a table with (calendar), with the months and days of an entire year, and Im using php to do it, my code is doing something weird. What happens is that January is empty and the days for January are being put in february. My code so far is as follows: $months = 12; $monthsOfTheyear = array("Januany","February","March","April","May","June","July","August","September","October","November","December"); $currentMonth = date("n"); $currentYear = date("Y"); $daysOfTheMonth = cal_days_in_month(CAL_GREGORIAN, $currentMonth, $currentYear); for($i = 0; $i < $months; $i++){ echo " <tbody class='month'>"; echo " <tr> <td colspan='".$daysOfTheMonth."'> ".$monthsOfTheyear[$i]." </td> </tr> <tr> "; $daysOfEachMonth = cal_days_in_month(CAL_GREGORIAN, $i, $currentYear); for($d = 1; $d <= $daysOfEachMonth; $d++){ echo " <td> ".$d." </td> "; } echo " </tr> </tbody"; } I'm obviously doing something wrong, but I've been staring at the monitor for about an hour trying to figure it out. I'd appreciate any advice. Thanks

  Read the article

• Recursive Enumeration in Java

  - by Harm De Weirdt

  Hello everyone. I still have a question about Enumerations. Here's a quick sketch of the situation. I have a class Backpack that has a Hashmap content with as keys a variable of type long, and as value an ArrayList with Items. I have to write an Enumeration that iterates over the content of a Backpack. But here's the catch: in a Backpack, there can also be another Backpack. And the Enumeration should also be able to iterate over the content of a backpack that is in the backpack. (I hope you can follow, I'm not really good at explaining..) Here is the code I have: public Enumeration<Object> getEnumeration() { return new Enumeration<Object>() { private int itemsDone = 0; //I make a new array with all the values of the HashMap, so I can use //them in nextElement() Collection<Long> keysCollection = getContent().keySet(); Long [] keys = keysCollection.toArray(new Long[keysCollection.size()]); public boolean hasMoreElements() { if(itemsDone < getContent().size()) { return true; }else { return false; } } public Object nextElement() { ArrayList<Item> temporaryList= getContent().get(keys[itemsDone]); for(int i = 0; i < temporaryList.size(); i++) { if(temporaryList.get(i) instanceof Backpack) { return temporaryList.get(i).getEnumeration(); }else { return getContent().get(keys[itemsDone++]); } } } }; Will this code work decently? It's just the "return temporaryList.get(i).getEnumeration();" I'm worried about. Will the users still be able to use just the hasMoreElemens() and nextElement() like he would normally do? Any help is appreciated, Harm De Weirdt

  Read the article

< Previous Page | 274 275 276 277 278 279 280 281 282 283 284 285  | Next Page >