Search Results

Search found 46416 results on 1857 pages for 'access log'.

Page 279/1857 | < Previous Page | 275 276 277 278 279 280 281 282 283 284 285 286  | Next Page >

• Is WEP used in conjunction with a wireless access list adequate security?

  - by LeopardSkinPillBoxHat

  I use a Netgear wireless router, with various wireless devices connecting to it. One of my wireless devices doesn't support WPA2 security, so I had to downgrade the security on the router to WEP. We all know WEP is broken, so as an added measure I enabled a wireless access list on the router so that only devices with specified MAC addresses which are in my access list are permitted to connect to the router. I know it is possible to spoof a MAC address from a device for the purposes of accessing a secure network like this. But is it easy? Is using WEP and a wireless access list good enough to prevent most hacking attacks? Or should I do whatever I can to ensure all devices support WPA2 in the future?

  Read the article

• As an admin, what tools do you use to log what you do to your boxes?

  - by Jerry

  I am more of a linux applications developer than an admin. Over time, I've built servers and maintained them, sometimes to offer services, mostly just to develop the applications I work on. Way back when I would create a file in my account to keep notes on what I did on each machine, so that I could replicate that when I migrated to other machines. Nowadays, I install something a private trac installation, install it's blog plugin, and then use that to make notes of everything I install, and most commands that I run, as well as the output. This provides me a combination wiki and blog that I find very useful as a "captain's log". I do this mostly so that when I migrate to a new clean machine, I have a much easier time in bringing it up. And yet, I am always amazed when I see others just install this, delete that, run this, setup this config, ... without seeming to use any way to actually note what they are doing. What do YOU do, and what tools are available? I am especially interested in the transition between maintaining a few machines for a few people and maintaining several to dozens of machines providing a real service. What are the best practices, and where can I find good resources? Thanks!

  Read the article

• nginx logrotate config

  - by TomOP

  Whats the best way to rotate nginx logfiles? In my opinion, I should create a file "nginx" in /etc/logrotate.d/ and fill it with the following code and do a /etc/init.d/syslog restart after that. This would be my config (I havn't tested it yet): /usr/local/nginx/logs/*.log { #rotate the logfile(s) daily daily # adds extension like YYYYMMDD instead of simply adding a number dateext # If log file is missing, go on to next one without issuing an error msg missingok # Save logfiles for the last 49 days rotate 49 # Old versions of log files are compressed with gzip compress # Postpone compression of the previous log file to the next rotation cycle delaycompress # Do not rotate the log if it is empty notifempty # create mode owner group create 644 nginx nginx #after logfile is rotated and nginx.pid exists, send the USR1 signal postrotate [ ! -f /usr/local/nginx/logs/nginx.pid ] || kill -USR1 `cat /usr/local/nginx/logs/nginx.pid` endscript } I have both the access.log and error.log files in /usr/local/nginx/logs/ and want to rotate both daily. Can anyone please tell me if "dateext" is correct? I want the log filename to be something like "access.log-2010-12-04". One more thing: Can I do the log rotation every day on a specific time (e.g. 11 pm)? If so, how? Thanks.

  Read the article

• ASA5505 Novice. Setting up Outside/Inside/and DMZ as Guest Network

  - by GriffJ

  I need a little help in developing a config for our ASA5505. I'm an MCSA/MCITPAS but I don't have a lot of practical cisco experience. Here is what I need help with, we currently have a PIX as our boarder gateway and well it's antiquated and it only has a 50 user license which means I'm constantly clearing local-host throughout the day as people complain. I discovered that the last IT person bought at couple ASA5505s and they've been sitting in the back of a cupboard. So far I've duplicated the configuration from the pix to the asa but as I was going to be going this far I thought I'd go further and remove another old cisco router that was used only for the guest network, I know the asa can do both jobs. So I'm going to paste a scenario I wrote up with the actual IPs changed to protect the innocent. ... Outside Network: 1.2.3.10 255.255.255.248 (we have a /29) Inside Network: 10.10.36.0 255.255.252.0 DMZ Network: 192.168.15.0 255.255.255.0 Outside Network on e0/0 DMZ Network on e0/1 Inside Network on e0/2-7 DMZ Network has DHCPD Enabled. DMZ DHCPD Pool is 192.168.15.50-192.168.15.250 DMZ Network needs to be able to see DNS on Inside Network at 10.10.37.11 and 10.10.37.12 DMZ Network needs to be able to access webmail on inside network at 10.10.37.15 DMZ Network needs to be able to access business website on inside network at 10.10.37.17 DMZ Network needs to be able to access the outside network (access to the internet). Inside Network has NO DHCPD. (dhcp is handled by domain controller) Inside Network needs to be able to see anything on the DMZ network. Inside Network needs to be able to access the outside network (access to the internet). There is some access-list stuff already, some static mapping already. Maps external IPs from our ISP to our inside server IPs static (inside,outside) 1.2.3.11 10.10.37.15 netmask 255.255.255.255 static (inside,outside) 1.2.3.12 10.10.37.17 netmask 255.255.255.255 static (inside,outside) 1.2.3.13 10.10.37.20 netmask 255.255.255.255 Allows access to our Webserver/Mailserver/VPN from the Outside. access-list 108 permit tcp any host 1.2.3.11 eq https access-list 108 permit tcp any host 1.2.3.11 eq smtp access-list 108 permit tcp any host 1.2.3.11 eq 993 access-list 108 permit tcp any host 1.2.3.11 eq 465 access-list 108 permit tcp any host 1.2.3.12 eq www access-list 108 permit tcp any host 1.2.3.12 eq https access-list 108 permit tcp any host 1.2.3.13 eq pptp Here is all the NAT and route stuff I have so far. global (outside) 1 interface global (outside) 2 1.2.3.11-1.2.3.14 netmask 255.255.255.248 nat (inside) 1 0.0.0.0 0.0.0.0 nat (dmz) 1 0.0.0.0 0.0.0.0 route outside 0.0.0.0 0.0.0.0 1.2.3.9 1

  Read the article

• How do I prevent internet access to a group of computers on my network?

  - by Kevin Boyd

  Well I have the following setup... Computer A , B and C are networked.... Computer A is connected to the internet, computer B and C are not setup for internet access currently but I guess its possible with some kind of setting they would eventually be able to access the internet and this is what I would like to prevent. In summary only A should have internet access while A and B and C should still be on intranet. Is this kind of config possible?, what kind of software or setup or tools would I need to achive this?

  Read the article

• How do I access column data in a previous select statement from a sub-query? [closed]

  - by payling

  PROBLEM How do I access column data in a previous select statement from a sub-query? Below is a simple mock up of what I'm attempting to do. Tables used: Quotes, Users QUOTES TABLE qid, (quote id) owner_uid, creator_uid SQL SYNTAX: SELECT q.qid, q.owner_uid, q.creator_uid, owner.fname, owner.lname FROM quotes q, (SELECT u.fname, u.lname FROM users u WHERE u.uid = q.owner_uid) AS owner WHERE q.qid = '#' SUMMARY I want to be able to use the quote table's owner_uid and specify it for the owner table so I can return all the owner info for that particular quote. The problem is, q.owner_uid is not recognized in the owner sub-query. What am I doing wrong?

  Read the article

• Access port on machine by connecting to other machine via SSH?

  - by piquadrat

  I have to access my home router's web interface on port 80. Unfortunately, the only way into the network I have at the moment is SSH to another machine on the same network. me ---|---SSH Box----Home Router My Google foo seems to have abandoned me, I couldn't didn't find anything helpful. Any ideas? Thanks! To clarify: I'm not at home right now. I do however have access to one machine on the network (a QNAP NAS) over SSH. I need to access the home router web interface on port 80 from my notebook which is outside of the home network.

  Read the article

• URL is generating a /#!/splash-page

  - by user32642

  My site for some reason is generating a shebang - /#!/splash-page on the URL. For example when I type www.modernvintage1005.com, the browser returns www.modernvintage1005.com/#!/splash-page and every subsequent page is /#!/about, /#!/contact, and so forth. There's absolutely nothing on the Google about this. There is a lot of rewrite help to eliminate .index.php from the home page, but that's it. How do I rewrite it to just say domain.com and domain.com/about.html, etc.? Here is my .htaccess file if you need to see it. # Rewrite Rule <IfModule mod_rewrite.c> RewriteEngine On RewriteBase / RewriteRule ^index\.php$ - [L] RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule . /index.php [L] </IfModule> # compress text, html, javascript, css, xml: <IfModule mod_deflate.c> AddOutputFilterByType DEFLATE text/plain AddOutputFilterByType DEFLATE text/html AddOutputFilterByType DEFLATE text/xml AddOutputFilterByType DEFLATE text/css AddOutputFilterByType DEFLATE application/xml AddOutputFilterByType DEFLATE application/xhtml+xml AddOutputFilterByType DEFLATE application/rss+xml AddOutputFilterByType DEFLATE application/javascript AddOutputFilterByType DEFLATE application/x-javascript AddType x-font/otf .otf AddType x-font/ttf .ttf AddType x-font/eot .eot AddType x-font/woff .woff AddType image/x-icon .ico AddType image/png .png </IfModule> ## EXPIRES CACHING ## <IfModule mod_expires.c> ExpiresActive On ExpiresByType image/jpg "access 1 year" ExpiresByType image/jpeg "access 1 year" ExpiresByType image/gif "access 1 year" ExpiresByType image/png "access 1 year" ExpiresByType text/css "access 1 month" ExpiresByType application/pdf "access 1 month" ExpiresByType text/x-javascript "access 1 month" ExpiresByType application/x-shockwave-flash "access 1 month" ExpiresByType image/x-icon "access 1 year" ExpiresDefault "access 2 days" </IfModule> ## EXPIRES CACHING ##

  Read the article

• How can I access my mini-pc (RaspberryPi / MK802 / Mele A1000 / VIA APC) via ethernet/wifi without having Monitor?

  - by sky770

  Soon I will be getting my own mini-PC (RaspberryPi / MK802 / Mele A1000 / VIA APC). But I was wondering whether is there any possibility that I can just power up and access my mini-pc's OS by connecting it to wifi/ethernet link and remotely access it over the LAN without actually needing a monitor (throughout the process?) ? I currently own a laptop and need a download box and later will be getting a HDTV for converting to a HTPC :D So, I don't really own a spare monitor now but I do have an extra keyboard and mouse. Is there exists any linux distro for the same? which I can use to directly fireup my mini-pc and hook it up across my LAN to remotely access through my laptop? Any suggestions appreciated :) Regards, sky770

  Read the article

• How to fix Black screen?

  - by stupidwhiteguy

  so I recently had my question deleted and merged into a standard how to for blank screens. I am relatively new to This type of computer work and i don't understand the steps nessary to diagnose my problem well enough to solve it so this help full how to has me feeling helpless I can use Ctrl + Alt +F1 and log in So how do I use sudo commands to fix the blank screen on my old dell? sudo lsoci -nn tells me my video card is a ATI rage 128 pro ultra tf /var/log/Xorg.0.log tells me Permission denied that is all i get Sudo apt-get install --reinstall unity tried thay also have also tried Apt-get update and upgrade Please dont close this question without providing an actual answer or if you think it is an exact duplicate provide a solution that worked for that question. I see a lot of these questions as closed and there is no real answer given I will try any solutions available and report results so that others can also solve problems not be overwhelmed by overly broad troubleshooting guides that do nothing to help solve specific issues The nomodeset change from quiet splash also yields no results on reboot I still get a blank screen this screen still has contorl alt f1 abilities but that is it contorl alt f8 causes blinking cursor and F7 gets a crazy flash with green and blue then blank screen Contorl alt f1 a log in prompt in text only when run in recovery mode with failsafe graphics its says the syestem is running in low graphics mode your screen graphics card and input device settings could not be detected correctly. You will need to configure these your self how do i do that? I got this /var/log/failsafeX-backup-120909200641.tar as the location of my log files but i have no idea how to axcess sounds work in blank screen also screen responds or flashes after log in is typed and password entered really any help is good I don't even know where to start I believe 12.04 is installed and functioning but i don't think I can see it at the end of the error log it says error setting mtrr (base= oxf0000000, size= 0x01000000, type=1) inappropriate ioctl for device(25) i have tried to provide as much info as I understand how to provide

  Read the article

• Best way to use mod_rewrite to replace WordPress pages with static files

  - by David Moles

  Here's the situation: I've got an old WordPress installation that I'd like to archive as static files, but I'd also like to preserve old URLs. I've already created the static archive with wget and sorted out the filenames and links. Now I'd like to configure Apache to intercept requests for the old dynamic URL and replace them with the new static one, e.g.: http://www.example.org/log/?p=1234 or http://www.example.org/log/index.php?p=1234 should redirect to http://www.example.org/log/archives/1234.html I've tried adding the following to the VirtualHost config for example.org, but to no effect -- I just get the PHP page. RewriteCond %{REQUEST_URI} /log/ RewriteCond %{QUERY_STRING} p=([^&;]*) RewriteRule ^/$ http://%{SERVER_NAME}/log/archives/%1.html [R,L] I've enabled logging and I can see what look like other rules being applied, but not this one. None of my other guesses at match patterns for %{REQUEST_URI} seem to have any effect either (log, log/, log.*, even .*). I'm new to mod_rewrite and this is mostly cargo cult, so I'm pretty sure I've gotten it wrong. Anyone know what I should be doing here?

  Read the article

• How to grant standard users access to disk partitions and flash storage?

  - by JK04

  I have a partition that I need standard users (not administrators)to have read/write access to. However, this partition does not even appear to them as it does to me as an administrator. How can I make it so that standard users can read/write to this partition? It would be nice if they could have the ability to mount it if needed. I have the same problem with removable media - if I have a flash card in the computer, the standard users cannot see this storage media.

  Read the article

• Several classes need to access the same data, where should the data be declared?

  - by Juicy

  I have a basic 2D tower defense game in C++. Each map is a separate class which inherits from GameState. The map delegates the logic and drawing code to each object in the game and sets data such as the map path. In pseudo-code the logic section might look something like this: update(): for each creep in creeps: creep.update() for each tower in towers: tower.update() for each missile in missiles: missile.update() The objects (creeps, towers and missiles) are stored in vector-of-pointers. The towers must have access to the vector-of-creeps and the vector-of-missiles to create new missiles and identify targets. The question is: where do I declare the vectors? Should they be members of the Map class, and passed as arguments to the tower.update() function? Or declared globally? Or are there other solutions I'm missing entirely?

  Read the article

• Javascript Module pattern with DOM ready

  - by dego89

  I am writing a JS Module pattern to test out code and help me understand the pattern, using a JS Fiddle. What I can't figure out is why my "private methods" on line 25 and 26, when referenced via DOM ready, have a value of undefined. JSFiddle Code Sample: var obj = { key: "value" }; var Module = (function () { var innerVar = "5"; console.log("obj var in Module:"); console.log(obj); function privateFunction() { console.log("privateFunction() called."); innerFunction(); function innerFunction() { console.log("inner function of (private function) called."); } } function _numTwo() { console.log("_numTwo() function called."); } return { test: privateFunction, numTwo: _numTwo } }(obj)); $(document).ready(function () { console.log("$ Dom Ready"); console.log("Module in Dom Ready: "); console.log(Module.test()); });

  Read the article

• Can't access internet with 32-bit browser(Chrome, FF, IE)! The 64-bit version of IE on Win 7 works f

  - by Sarveshwar

  I had installed Kaspersky AV 2010 two days ago. Everything was fine until I was not able to access the internet a few minutes back with the 32 bit browsers I have installed - Chrome, Firefox and the 32 bit IE. Then I see that utorrent is working fine!! So again I checked with the 64 bit IE and I could access the internet. I am currently using IE 64 bit to access superuser. Please help! I have uninstalled the KAV 2010. I thought that was the problem. Is this any virus or something? Also, whenever any browser (except IE 64), the screen freezes. Nothing except the browser works! And after the browser is closed, everything comes back to normal. Thanks!

  Read the article

• I want to access internet on ubuntu 12.04.1 guest system from windows 7 64bit host in virtualbox 4.1.18 How to do so?

  - by Rohit

  I am using Windows 7 64bit as host system and i have installed ubuntu 12.04.1 in virtual box as stated above. I have a dsl connection which works well on my host system and now I need to access the same connection on my guest ubuntu. I cant see any such settings in ubuntu. I am total biginner and dont know anything about linux. Win 7 is showing unknown network. Please guide me from the scratch. Thank you.

  Read the article

• How do I install OSQA with limited access to the server?

  - by Noir

  I would very much like to install OSQA on my host (provided/owned by my friend), but I can not make heads or tails of how I would go about doing it; a lot of the dependancies and such can't be installed with the current level of access (or most probably just knowledge) that I have. I can provide any further information required, and attempt to contact (friend) to see if he can do any of it for me, but I'm unsure as to how often I will be able to contact him. exec and shell_exec are not disabled on the server. If there are any other alternatives that I could use, please let me know! I tried Qwench but that was pretty buggy. I can usually deal with these kind of things, but this is my first foray into Python stuff!

  Read the article

• Squid3 not working. Access denied.

  - by Nitish

  I installed SQUID3 on a Linux machine with two ethernet interfaces (eth0 and eth1). I used the default settings in the squid.conf file and uncommented the two lines acl localnet src 192.168.0.0/16 and http_access allow localnet. eth0 is connected to a router, which provides Internet access. It is assigned an IP 192.168.1.2 by the router. I manually configured eth1 to have an IP address 192.168.5.1. It is connected to a switch. Systems having IP addresses 192.168.5.x are connected to this switch. I ran these two commands for NAT: iptables -t nat -A PREROUTING -i eth1 -p tcp -m tcp --dport 80 -j DNAT --to-destination 192.168.5.1:3128 iptables -t nat -A PREROUTING -i eth0 -p tcp -m tcp --dport 80 -j REDIRECT --to-ports 3128 But when I try to access internet from a system having IP 192.168.5.2 through the proxy I get an error that says "Access denied". What is wrong with my configuration?

  Read the article

• An access violation occurs, and the corresponding application pool is recycled when an ASP.NET 1.1 W

  976400 ... An access violation occurs, and the corresponding application pool is recycled when an ASP.NET 1.1 Web site is under a heavy loadThis RSS feed provided by kbAlerz.com.Visit kbAlertz.com to subscribe. It's 100% free and you'll be able to recieve e-mail or RSS updates for the technologies you pick from the Microsoft Knowledge Base....Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• Can't access internet with 32-bit browser(Chrome, FF, IE)! The 64-bit version of IE on Win 7 works fine

  - by Sarveshwar

  I had installed Kaspersky AV 2010 two days ago. Everything was fine until I was not able to access the internet a few minutes back with the 32 bit browsers I have installed - Chrome, Firefox and the 32 bit IE. Then I see that utorrent is working fine!! So again I checked with the 64 bit IE and I could access the internet. I am currently using IE 64 bit to access superuser. Please help! I have uninstalled the KAV 2010. I thought that was the problem. Is this any virus or something? Also, whenever any browser (except IE 64), the screen freezes. Nothing except the browser works! And after the browser is closed, everything comes back to normal. Thanks!

  Read the article

• Server 2012 file server security - File access through software only?

  - by user1607914

  I have just setup a server 2012 essentials R2 box as a test bed for my small business. Its running Essentials R2 as a VM on a Essentials R2 host. I have set it up to be the DC and DHCP server and joined a client. My next task is to use it as a file server but I am not quite sure how to set it up. All the client interactions with the file server will be through client side software. I therefore do not want any access to the files apart from through the software. I have looked at the ntfs permissions and there is a permission called "List Folder/Read Data" however I am unsure this will do what I want. Is it possible to give access to the files but not allow access through the windows explorer / command line?

  Read the article

• Does anyone know of a inexpensive NAT router that has the ability to limit access to the Internet to

  - by Corey

  Does anyone know of a inexpensive NAT router that has the ability to limit access to the Internet to a specific MAC address? I know the Linksys routers have a MAC filtering feature, but it is the opposite of what I need. It allows you to block access to a specific MAC address. I need something that will block all, but allow an exception. I'm dealing with some VOIP issues in my company's network, and I think the answer is to have a separate router on the network for my PBX to use. I want to make sure that other nodes are not allowed to access the Internet via this second router.

  Read the article

• WSS 3.0 fails to hide quick launch items for which the current user does not have access

  - by Nils

  I'm running a Small Business Server 2008 with Windows Sharepoint Services 3.0 (WSS 3.0). I thought WSS was supposed to hide menu items for which the current logged in user don't have access? Apparently, all users can see all links, regardless of whether they have access. This applies to both links to newly created sub-sites as well as document libraries/lists. Is this expected behaviour, or is there a misconfiguration somewhere that causes the links to stay visible even for users without access? Thanks!

  Read the article

• Giving SSH access to a user, and security issues.

  - by Kris Sauquillo

  Okay, so I have a VPS and I made an account for a friend so he can host his own domains (using the reseller features in DirectAdmin). He's asking for SSH access, and I know that this is probably a bad idea. Does he have access to my whole server, such as executing commands, accessing my domains that I host on my server? I logged into my SSH using his account details and it let me navigate around all of the root folders/files, and his account is under /home/AccountName/. Is there anyway to restrict his access to his folder only? And the commands he can use?

  Read the article

• How can I ensure an ex-administrator of Exchange doesn't still have email access somewhere?

  - by Tony T

  I work for a company in which an ex-employee had administrative access to Microsoft Exchange 2007, and I understand that at some points this person had email which was sent to other employees also forwarded on to him. Upon taking over the administration of the server, of course all of his known accounts were closed, and any of those forwarding rules were removed. However, I would like to ensure that we didn't miss anything. What would be the best way to ensure that: (1) There isn't still some sort-of email being forwarded on to him somewhere? (2) That he doesn't have some sort-of other access to an inbox or another employee's email? I am less concerned about access to the box itself as I am that there is an existing email rule somewhere that is still getting run, or that there is a distribution list that we missed, etc.

  Read the article

< Previous Page | 275 276 277 278 279 280 281 282 283 284 285 286  | Next Page >