Search Results

Search found 19676 results on 788 pages for 'hardware interface'.

Page 279/788 | < Previous Page | 275 276 277 278 279 280 281 282 283 284 285 286  | Next Page >

• Dell Studio 1737 Overheating

  - by Sean

  I am using a Dell Studio 1737 laptop. I have been running Linux and have ran Windows recently for a very long time. I upgraded to the 10.10 distribution and since that distro, it seems that for some reason all Linuxes want to push my laptop to extremes. I have recently upgraded to Ubuntu 12.04 since I heart that it contains kernel fixes for overheating issues. 12.04 will actually eventually cool the system, but that is after the fans run to the point it sounds like a jet aircraft taking off and the laptop makes my hands sweat. In trying to combat the heat problems I have done the following: I installed the propriatery driver for my ATI Mobility HD 3600. I have tried both the one in the Additional Drivers and also tried ATI's latest greatest version. If I don't install this my laptop will overheat and shut off in minutes. Both seem to perform similarly, but the heat problem remains. I have tried limiting the CPU by installing the CPUFreq Indicator. This does help keep the machine from shutting off, but the heat is still uncomfortable to be around the machine. I usually run in power saver mode or run the cpu at 1.6 GHZ just to error on safety. I ran sensors-detect and here are the results: sean@sean-Studio-1737:~$ sudo sensors-detect # sensors-detect revision 5984 (2011-07-10 21:22:53 +0200) # System: Dell Inc. Studio 1737 (laptop) # Board: Dell Inc. 0F237N This program will help you determine which kernel modules you need to load to use lm_sensors most effectively. It is generally safe and recommended to accept the default answers to all questions, unless you know what you're doing. Some south bridges, CPUs or memory controllers contain embedded sensors. Do you want to scan for them? This is totally safe. (YES/no): y Module cpuid loaded successfully. Silicon Integrated Systems SIS5595... No VIA VT82C686 Integrated Sensors... No VIA VT8231 Integrated Sensors... No AMD K8 thermal sensors... No AMD Family 10h thermal sensors... No AMD Family 11h thermal sensors... No AMD Family 12h and 14h thermal sensors... No AMD Family 15h thermal sensors... No AMD Family 15h power sensors... No Intel digital thermal sensor... Success! (driver `coretemp') Intel AMB FB-DIMM thermal sensor... No VIA C7 thermal sensor... No VIA Nano thermal sensor... No Some Super I/O chips contain embedded sensors. We have to write to standard I/O ports to probe them. This is usually safe. Do you want to scan for Super I/O sensors? (YES/no): y Probing for Super-I/O at 0x2e/0x2f Trying family `National Semiconductor/ITE'... No Trying family `SMSC'... No Trying family `VIA/Winbond/Nuvoton/Fintek'... No Trying family `ITE'... No Probing for Super-I/O at 0x4e/0x4f Trying family `National Semiconductor/ITE'... Yes Found `ITE IT8512E/F/G Super IO' (but not activated) Some hardware monitoring chips are accessible through the ISA I/O ports. We have to write to arbitrary I/O ports to probe them. This is usually safe though. Yes, you do have ISA I/O ports even if you do not have any ISA slots! Do you want to scan the ISA I/O ports? (YES/no): y Probing for `National Semiconductor LM78' at 0x290... No Probing for `National Semiconductor LM79' at 0x290... No Probing for `Winbond W83781D' at 0x290... No Probing for `Winbond W83782D' at 0x290... No Lastly, we can probe the I2C/SMBus adapters for connected hardware monitoring devices. This is the most risky part, and while it works reasonably well on most systems, it has been reported to cause trouble on some systems. Do you want to probe the I2C/SMBus adapters now? (YES/no): y Using driver `i2c-i801' for device 0000:00:1f.3: Intel ICH9 Module i2c-i801 loaded successfully. Module i2c-dev loaded successfully. Now follows a summary of the probes I have just done. Just press ENTER to continue: Driver `coretemp': * Chip `Intel digital thermal sensor' (confidence: 9) To load everything that is needed, add this to /etc/modules: #----cut here---- # Chip drivers coretemp #----cut here---- If you have some drivers built into your kernel, the list above will contain too many modules. Skip the appropriate ones! Do you want to add these lines automatically to /etc/modules? (yes/NO)y Successful! Monitoring programs won't work until the needed modules are loaded. You may want to run 'service module-init-tools start' to load them. Unloading i2c-dev... OK Unloading i2c-i801... OK Unloading cpuid... OK sean@sean-Studio-1737:~$ sudo service module-init-tools start module-init-tools stop/waiting I also tried installing i8k but that didn't work since it didn't seem to be able to communicate with the hardware (probably for different kind of device). Also I ran acpi -V and here are the results: Battery 0: Full, 100% Battery 0: design capacity 613 mAh, last full capacity 260 mAh = 42% Adapter 0: on-line Thermal 0: ok, 49.0 degrees C Thermal 0: trip point 0 switches to mode critical at temperature 100.0 degrees C Thermal 1: ok, 48.0 degrees C Thermal 1: trip point 0 switches to mode critical at temperature 100.0 degrees C Thermal 2: ok, 51.0 degrees C Thermal 2: trip point 0 switches to mode critical at temperature 100.0 degrees C Cooling 0: LCD 0 of 15 Cooling 1: Processor 0 of 10 Cooling 2: Processor 0 of 10 I have hit a wall and don't know what to do now. Any advice is appreciated.

  Read the article

• Nashorn, the rhino in the room

  - by costlow

  Nashorn is a new runtime within JDK 8 that allows developers to run code written in JavaScript and call back and forth with Java. One advantage to the Nashorn scripting engine is that is allows for quick prototyping of functionality or basic shell scripts that use Java libraries. The previous JavaScript runtime, named Rhino, was introduced in JDK 6 (released 2006, end of public updates Feb 2013). Keeping tradition amongst the global developer community, "Nashorn" is the German word for rhino. The Java platform and runtime is an intentional home to many languages beyond the Java language itself. OpenJDK’s Da Vinci Machine helps coordinate work amongst language developers and tool designers and has helped different languages by introducing the Invoke Dynamic instruction in Java 7 (2011), which resulted in two major benefits: speeding up execution of dynamic code, and providing the groundwork for Java 8’s lambda executions. Many of these improvements are discussed at the JVM Language Summit, where language and tool designers get together to discuss experiences and issues related to building these complex components. There are a number of benefits to running JavaScript applications on JDK 8’s Nashorn technology beyond writing scripts quickly: Interoperability with Java and JavaScript libraries. Scripts do not need to be compiled. Fast execution and multi-threading of JavaScript running in Java’s JRE. The ability to remotely debug applications using an IDE like NetBeans, Eclipse, or IntelliJ (instructions on the Nashorn blog). Automatic integration with Java monitoring tools, such as performance, health, and SIEM. In the remainder of this blog post, I will explain how to use Nashorn and the benefit from those features. Nashorn execution environment The Nashorn scripting engine is included in all versions of Java SE 8, both the JDK and the JRE. Unlike Java code, scripts written in nashorn are interpreted and do not need to be compiled before execution. Developers and users can access it in two ways: Users running JavaScript applications can call the binary directly:jre8/bin/jjs This mechanism can also be used in shell scripts by specifying a shebang like #!/usr/bin/jjs Developers can use the API and obtain a ScriptEngine through:ScriptEngine engine = new ScriptEngineManager().getEngineByName("nashorn"); When using a ScriptEngine, please understand that they execute code. Avoid running untrusted scripts or passing in untrusted/unvalidated inputs. During compilation, consider isolating access to the ScriptEngine and using Type Annotations to only allow @Untainted String arguments. One noteworthy difference between JavaScript executed in or outside of a web browser is that certain objects will not be available. For example when run outside a browser, there is no access to a document object or DOM tree. Other than that, all syntax, semantics, and capabilities are present. Examples of Java and JavaScript The Nashorn script engine allows developers of all experience levels the ability to write and run code that takes advantage of both languages. The specific dialect is ECMAScript 5.1 as identified by the User Guide and its standards definition through ECMA international. In addition to the example below, Benjamin Winterberg has a very well written Java 8 Nashorn Tutorial that provides a large number of code samples in both languages. Basic Operations A basic Hello World application written to run on Nashorn would look like this: #!/usr/bin/jjs print("Hello World"); The first line is a standard script indication, so that Linux or Unix systems can run the script through Nashorn. On Windows where scripts are not as common, you would run the script like: jjs helloWorld.js. Receiving Arguments In order to receive program arguments your jjs invocation needs to use the -scripting flag and a double-dash to separate which arguments are for jjs and which are for the script itself:jjs -scripting print.js -- "This will print" #!/usr/bin/jjs var whatYouSaid = $ARG.length==0 ? "You did not say anything" : $ARG[0] print(whatYouSaid); Interoperability with Java libraries (including 3rd party dependencies) Another goal of Nashorn was to allow for quick scriptable prototypes, allowing access into Java types and any libraries. Resources operate in the context of the script (either in-line with the script or as separate threads) so if you open network sockets and your script terminates, those sockets will be released and available for your next run. Your code can access Java types the same as regular Java classes. The “import statements” are written somewhat differently to accommodate for language. There is a choice of two styles: For standard classes, just name the class: var ServerSocket = java.net.ServerSocket For arrays or other items, use Java.type: var ByteArray = Java.type("byte[]")You could technically do this for all. The same technique will allow your script to use Java types from any library or 3rd party component and quickly prototype items. Building a user interface One major difference between JavaScript inside and outside of a web browser is the availability of a DOM object for rendering views. When run outside of the browser, JavaScript has full control to construct the entire user interface with pre-fabricated UI controls, charts, or components. The example below is a variation from the Nashorn and JavaFX guide to show how items work together. Nashorn has a -fx flag to make the user interface components available. With the example script below, just specify: jjs -fx -scripting fx.js -- "My title" #!/usr/bin/jjs -fx var Button = javafx.scene.control.Button; var StackPane = javafx.scene.layout.StackPane; var Scene = javafx.scene.Scene; var clickCounter=0; $STAGE.title = $ARG.length>0 ? $ARG[0] : "You didn't provide a title"; var button = new Button(); button.text = "Say 'Hello World'"; button.onAction = myFunctionForButtonClicking; var root = new StackPane(); root.children.add(button); $STAGE.scene = new Scene(root, 300, 250); $STAGE.show(); function myFunctionForButtonClicking(){   var text = "Click Counter: " + clickCounter;   button.setText(text);   clickCounter++;   print(text); } For a more advanced post on using Nashorn to build a high-performing UI, see JavaFX with Nashorn Canvas example. Interoperable with frameworks like Node, Backbone, or Facebook React The major benefit of any language is the interoperability gained by people and systems that can read, write, and use it for interactions. Because Nashorn is built for the ECMAScript specification, developers familiar with JavaScript frameworks can write their code and then have system administrators deploy and monitor the applications the same as any other Java application. A number of projects are also running Node applications on Nashorn through Project Avatar and the supported modules. In addition to the previously mentioned Nashorn tutorial, Benjamin has also written a post about Using Backbone.js with Nashorn. To show the multi-language power of the Java Runtime, there is another interesting example that unites Facebook React and Clojure on JDK 8’s Nashorn. Summary Nashorn provides a simple and fast way of executing JavaScript applications and bridging between the best of each language. By making the full range of Java libraries to JavaScript applications, and the quick prototyping style of JavaScript to Java applications, developers are free to work as they see fit. Software Architects and System Administrators can take advantage of one runtime and leverage any work that they have done to tune, monitor, and certify their systems. Additional information is available within: The Nashorn Users’ Guide Java Magazine’s article "Next Generation JavaScript Engine for the JVM." The Nashorn team’s primary blog or a very helpful collection of Nashorn links.

  Read the article

• Security risks posed by specifying technologies used

  - by SabreWolfy

  I am developing online tools for non-commercial use, which are hosted on dedicated hardware. I would like to include logos indicating the technologies I used (Apache or Python for example), at the bottom of the page. What are the security risks/implications, if any, of "advertizing" this information? It is better not to reveal that the web server is Apache, and that I used Pyhton and jQuery, for example?

  Read the article

• Free Blogging Software with Wordpress

  When redesigning the www.computerarticles.co.uk website this week, I came across a far simpler way of doing so rather than creating a whole new interface. You can use free blogging software to create... [Author: Chris Holgate - Computers and Internet - May 15, 2010]

  Read the article

• Siegertypen unter sich - beim Oracle Partner Day in Frankfurt

  - by A&C Redaktion

  WIR WARTEN AUF SIE! ORACLE PARTNER DAY - 29. OKTOBER 2012 Erfolg hat immer eine sportliche Komponente – Ehrgeiz, Wissen und Durchhaltevermögen sind mit entscheidend, um in die nächste Runde zu kommen. Sie als Partner können jetzt in einer neuen Liga spielen, denn ab sofort haben Sie die Möglichkeit, das gesamte Oracle Red Stack Produktportfolio – Software, Hardware und Applications – zu verkaufen. An diesem Tag erwarten Sie: David Callaghan, Senior Vice President EMEA Alliances & Channels Jürgen Kunz, Senior Vice President Northern Europe & Country Leader Germany Silvia Kaske, Senior Director Alliances & Channels Europe North Christian Werner, Senior Director Alliances & Channels Germany Sie haben Fragen an die Executives? Im Oracle Leaders Panel (ab 17 Uhr) werden diese live beantwortet. Schicken Sie uns Ihre Fragen einfach zu: per SMS an +49 176 84879149, per Email, via Facebook oder über Twitter.Das neue A&C Coaching Team steht. Sind Sie dabei?Spitzenleistung braucht eine breite Basis: die neue Mannschaftsaufstellung lernen Sie vor Ort live kennen. Holen Sie sich Unterstützung. Und profitieren Sie von einem exzellenten Netzwerk – Ihrer Partnerschaft auf dem Weg nach oben. Steigen Sie mit Alliances & Channels gemeinsam in die neue Liga auf, das mit seinem Produktportfolio am Markt seinesgleichen sucht. Nur noch wenige Tage bis zum Oracle Partner Day 2012!Aber noch nicht zu spät, um sich zu registrieren. Machen Sie sich jetzt auf den Weg an die Spitze! Melden Sie sich hier gleich an.Noch besteht die Möglichkeit für ein 1:1 Meeting mit ausgewählten Oracle Managern vor Ort. Kreuzen Sie Ihren Wunschpartner an, mit dem Sie sich gerne austauschen möchten. Sie machen den Test. Wir zahlen die Testgebühr!Nutzen Sie die Gelegenheit, sich direkt zum OPN Implementation Specialist zu akkreditieren! Melden Sie sich jetzt zum offiziellen Implementierungstest beim Testcenter Pearson Vue vor Ort beim Oracle Partner Day an. Wählen Sie Ihre Fachbereiche aus Fusion Middleware, Applications, Hardware, Datenbank und gehen Sie als Implementierungsspezialist nach Hause. Jetzt kommt der Ball ins Rollen! Sportlicher Abschluss in der Commerzbank ArenaNach den fachlichen Themen des Tages wollen wir den Abend in sportlichem Rahmen mit Ihnen ausklingen lassen. Die „Oracle Red Stack Arena Sport Challenge“ hält für Sie einige Überraschungen bereit. Nur so viel sei verraten: Es wird auch ein mit QR-Codes verknüpfes Gewinnspiel mit attraktiven Preisen geben. Bereiten Sie Ihr Smartphone dafür vor. Wir freuen uns auf Sie!

  Read the article

• Siegertypen unter sich - beim Oracle Partner Day in Frankfurt

  - by A&C Redaktion

  WIR WARTEN AUF SIE! ORACLE PARTNER DAY - 29. OKTOBER 2012 Erfolg hat immer eine sportliche Komponente – Ehrgeiz, Wissen und Durchhaltevermögen sind mit entscheidend, um in die nächste Runde zu kommen. Sie als Partner können jetzt in einer neuen Liga spielen, denn ab sofort haben Sie die Möglichkeit, das gesamte Oracle Red Stack Produktportfolio – Software, Hardware und Applications – zu verkaufen. An diesem Tag erwarten Sie: David Callaghan, Senior Vice President EMEA Alliances & Channels Jürgen Kunz, Senior Vice President Northern Europe & Country Leader Germany Silvia Kaske, Senior Director Alliances & Channels Europe North Christian Werner, Senior Director Alliances & Channels Germany Sie haben Fragen an die Executives? Im Oracle Leaders Panel (ab 17 Uhr) werden diese live beantwortet. Schicken Sie uns Ihre Fragen einfach zu: per SMS an +49 176 84879149, per Email, via Facebook oder über Twitter.Das neue A&C Coaching Team steht. Sind Sie dabei?Spitzenleistung braucht eine breite Basis: die neue Mannschaftsaufstellung lernen Sie vor Ort live kennen. Holen Sie sich Unterstützung. Und profitieren Sie von einem exzellenten Netzwerk – Ihrer Partnerschaft auf dem Weg nach oben. Steigen Sie mit Alliances & Channels gemeinsam in die neue Liga auf, das mit seinem Produktportfolio am Markt seinesgleichen sucht. Nur noch wenige Tage bis zum Oracle Partner Day 2012!Aber noch nicht zu spät, um sich zu registrieren. Machen Sie sich jetzt auf den Weg an die Spitze! Melden Sie sich hier gleich an.Noch besteht die Möglichkeit für ein 1:1 Meeting mit ausgewählten Oracle Managern vor Ort. Kreuzen Sie Ihren Wunschpartner an, mit dem Sie sich gerne austauschen möchten. Sie machen den Test. Wir zahlen die Testgebühr!Nutzen Sie die Gelegenheit, sich direkt zum OPN Implementation Specialist zu akkreditieren! Melden Sie sich jetzt zum offiziellen Implementierungstest beim Testcenter Pearson Vue vor Ort beim Oracle Partner Day an. Wählen Sie Ihre Fachbereiche aus Fusion Middleware, Applications, Hardware, Datenbank und gehen Sie als Implementierungsspezialist nach Hause. Jetzt kommt der Ball ins Rollen! Sportlicher Abschluss in der Commerzbank ArenaNach den fachlichen Themen des Tages wollen wir den Abend in sportlichem Rahmen mit Ihnen ausklingen lassen. Die „Oracle Red Stack Arena Sport Challenge“ hält für Sie einige Überraschungen bereit. Nur so viel sei verraten: Es wird auch ein mit QR-Codes verknüpfes Gewinnspiel mit attraktiven Preisen geben. Bereiten Sie Ihr Smartphone dafür vor. Wir freuen uns auf Sie!

  Read the article

• Atlanta Laptop Repair

  Is your laptop running slow or crashing? To the average person laptop problems can be confusing. You do not know whether it';s hardware or a software issue that is causing the problem. An experienced ... [Author: Steven Yaniz - Computers and Internet - March 30, 2010]

  Read the article

• Oracle Lean Supply Chain Newsletter

  - by [email protected]

  Ready to ride the cutting edge? Leader or Laggard? There's plenty of new material and exciting articles on Oracle Supply Chain products in the quarterly newsletter, the February '10 issue contained some interesting articles on: - Supply Chains in the new 'Abnornal" - Manufacturers go Paperless to Boost Lean - Five Good Reasons to go to Release 12.1 - Software and Hardware complete with the Sun acquisition See details at: http://www.oracle.com/newsletters/samples/supply-chain-management.html Stay tuned for the May'10 issue and some great articles worth reviewing

  Read the article

• What's your advise on a potential legal suit? [closed]

  - by ohho

  I [xxx app developer] received an email from Apple that a developer [of yyy app] believes I am "infringing their copyright." Description of Issue: [xxx developer] copied my application (my application is [yyy]) feature by feature. Even their donation model is completely copied from my application. Their first release was significantly later than mine, which implies copying of the application rather than parallel development. I suffered significant financial losses because of their actions, in additional to promotion problems as many people are confused with their product. My advertising was based around the idea of a "free [yyy] application for an iPhone" and they have just taken that as a title for their application. I would appreciate if someone takes a look at their release schedule and compare it to my releases. Additionally, please take a look at their functionality and how it point by point copies the functionality of my older releases. I am asking Apple to remove their application from the App Store, and ban them from resubmitting it. Thank you for your time! [yyy developer], the developer of the [yyy] application. My response was: The code of [xxx] is written by myself, using Apple public API. The graphics elements are designed by myself. The user interface and app control are independently designed and different from other [similar type] apps (please judge yourself). In-app Purchase is iOS Apple standard API. iAd is Apple iOS standard API. I don't think features can be owned exclusively. In fact, my app comes with fewer features, as I prefer minimalist design. I don't think idea can be owned exclusively. Apple responded: Thank you for your response. Unfortunately, Apple cannot serve as arbiter for disputes among third parties. Please contact [yyy developer] directly regarding your actions. You can reach [yyy developer] through: [...]. We look forward to confirmation from both parties that this issue has been resolved. If this issue is not resolved shortly, Apple may be forced to pull your application(s) from the App Store. Then I sent my response above to [yyy developer]. [yyy developer] then asked me "to provide (my) legal address and contact details that (his) lawyer requires to file a copyright infringement suit." IMO, I don't think the [yyy developer]'s claim on "feature by feature" copy is valid. I have fewer features, completely different user interface design. However, I don't think I can afford a legal action for an app of so little financial return. So what's your advise on this? Should I just let Apple pull my app? Or is there any alternative I can consider? FYI ... UI of [xxx app]: and UI of [yyy app]:

  Read the article

• Information Rights Management 11g Release Highlights

  - by andy.peet

  Broader Enterprise Reach Built on Fusion Middleware and Java EE Broad platform certifications Standard 27 Oracle languages SSO authentication: OAM, Windows auth, Basic auth to LDAP Extensible, First-Class Security Extensible classification model for application integrations FIPS 140-2 certification Hardware Security Module for key storage Usability and Templates New Web-based management console Best practice rights model: global roles and templates For more information see the new information available on OTN, including the Developer Area and whitepaper, and of course the IRM Blog.

  Read the article

• Effective Business Continuity Planning

  - by Chandra Vennapoosa

  While no one can be sure of where or when a disaster will occur, or what form the disaster will come in, it is important to be prepared for the unexpected. There are many companies today that have not taken into consideration the impact of disasters and this is a grave mistake. BCP Guidelines BCP for Effective Planning Building an Efficient Recovery Solution Plan Recovery Point Objective Hardware and Data Back Up Requirements Evaluation Read here :  Effective Business Continuity Planning

  Read the article

• Rapid Planning: Next Generation MRP

  - by john.bermudez

  MRP has been a mainstay of manufacturing systems for 40 years. MRP evolved from simple inventory planning systems to become the heart of the MRPII systems which eventually became ERP. While the applications surrounding it have become broader, more sophisticated and web-based, MRP continues to operate in the loneliness of the Saturday night batch window quietly exploding bills of materials and logging exceptions for hours. During this same 40 years, manufacturing business processes have seen countless changes and improvements including JIT, TQM, Six Sigma, Flow Manufacturing, Lean Manufacturing and Supply Chain Management. Although much logic has been added to MRP to deal with new manufacturing processes, it has not been able to keep up with the real-time pace of today's supply chain. As a result, planners have devised ingenious ways to trick MRP to handle new processes but often need to dump the output into spreadsheets of their own design in the hope of wrestling thousands of exceptions to ground. Oracle's new Rapid Planning application is just what companies still running MRP have been waiting for! The newest member of the Value Chain Planning product line, Rapid Planning is designed to empower planners with comprehensive supply planning that runs online in minutes, not hours. It enables a planner simulate the incremental impact of a new order or re-run an entire plan in a separate sandbox. Rapid Planning does a complete multi-level bill of material explosion like MRP but plans orders considering material and capacity constraints. Considering material and capacity constraints in planning can help you quickly reduce inventory and improve on-time shipments. Rapid Planning is an APS application that leverages years of Oracle development experience and customer feedback. Rather than rely exclusively on black-box heuristics, Rapid Planning is designed to give planners the computing power to use their industry experience and business knowledge to improve MRP. For example, Rapid Planning has a powerful worksheet user interface with built-in query capability that allows the planner to locate the orders she is interested in and use a mass update function to make quick work of large changes. The planner can save these queries and unique user interface to personalize their planning environment. Most importantly, Rapid Planning is designed to do supply planning in today's dynamic supply chain environment. It can be used to supplement MRP or replace MRP entirely. It generates plans that provide order-by-order details with aggregate key performance indicators that enable planners to quickly assess the overall business impact of a plan. To find out more about how Rapid Planning can help improve your MRP, please contact me at [email protected] or your Oracle Account Manager.

  Read the article

• Design for complex ATG applications

  - by Glen Borkowski

  Overview Needless to say, some ATG applications are more complex than others.  Some ATG applications support a single site, single language, single catalog, single currency, have a single development staff, single business team, and a relatively simple business model.  The real complex applications have to support multiple sites, multiple languages, multiple catalogs, multiple currencies, a couple different development teams, multiple business teams, and a highly complex business model (and processes to go along with it).  While it's still important to implement a proper design for simple applications, it's absolutely critical to do this for the complex applications.  Why?  It's all about time and money.  If you are unable to manage your complex applications in an efficient manner, the cost of managing it will increase dramatically as will the time to get things done (time to market).  On the positive side, your competition is most likely in the same situation, so you just need to be more efficient than they are. This article is intended to discuss a number of key areas to think about when designing complex applications on ATG.  Some of this can get fairly technical, so it may help to get some background first.  You can get enough of the required background information from this post.  After reading that, come back here and follow along. Application Design Of all the various types of ATG applications out there, the most complex tend to be the ones in the telecommunications industry - especially the ones which operate in multiple countries.  To get started, let's assume that we are talking about an application like that.  One that has these properties: Operates in multiple countries - must support multiple sites, catalogs, languages, and currencies The organization is fairly loosely-coupled - single brand, but different businesses across different countries There is some common functionality across all sites in all countries There is some common functionality across different sites within the same country Sites within a single country may have some unique functionality - relative to other sites in the same country Complex product catalog (mostly in terms of bundles, eligibility, and compatibility) At this point, I'll assume you have read through the required reading and have a decent understanding of how ATG modules work... Code / configuration - assemble into modules When it comes to defining your modules for a complex application, there are a number of goals: Divide functionality between the modules in a way that maps to your business Group common functionality 'further down in the stack of modules' Provide a good balance between shared resources and autonomy for countries / sites Now I'll describe a high level approach to how you could accomplish those goals...  Let's start from the bottom and work our way up.  At the very bottom, you have the modules that ship with ATG - the 'out of the box' stuff.  You want to make sure that you are leveraging all the modules that make sense in order to get the most value from ATG as possible - and less stuff you'll have to write yourself.  On top of the ATG modules, you should create what we'll refer to as the Corporate Foundation Module described as follows: Sits directly on top of ATG modules Used by all applications across all countries and sites - this is the foundation for everyone Contains everything that is common across all countries / all sites Once established and settled, will change less frequently than other 'higher' modules Encapsulates as many enterprise-wide integrations as possible Will provide means of code sharing therefore less development / testing - faster time to market Contains a 'reference' web application (described below) The next layer up could be multiple modules for each country (you could replace this with region if that makes more sense).  We'll define those modules as follows: Sits on top of the corporate foundation module Contains what is unique to all sites in a given country Responsible for managing any resource bundles for this country (to handle multiple languages) Overrides / replaces corporate integration points with any country-specific ones Finally, we will define what should be a fairly 'thin' (in terms of functionality) set of modules for each site as follows: Sits on top of the country it resides in module Contains what is unique for a given site within a given country Will mostly contain configuration, but could also define some unique functionality as well Contains one or more web applications The graphic below should help to indicate how these modules fit together: Web applications As described in the previous section, there are many opportunities for sharing (minimizing costs) as it relates to the code and configuration aspects of ATG modules.  Web applications are also contained within ATG modules, however, sharing web applications can be a bit more difficult because this is what the end customer actually sees, and since each site may have some degree of unique look & feel, sharing becomes more challenging.  One approach that can help is to define a 'reference' web application at the corporate foundation layer to act as a solid starting point for each site.  Here's a description of the 'reference' web application: Contains minimal / sample reference styling as this will mostly be addressed at the site level web app Focus on functionality - ensure that core functionality is revealed via this web application Each individual site can use this as a starting point There may be multiple types of web apps (i.e. B2C, B2B, etc) There are some techniques to share web application assets - i.e. multiple web applications, defined in the web.xml, and it's worth investigating, but is out of scope here. Reference infrastructure In this complex environment, it is assumed that there is not a single infrastructure for all countries and all sites.  It's more likely that different countries (or regions) could have their own solution for infrastructure.  In this case, it will be advantageous to define a reference infrastructure which contains all the hardware and software that make up the core environment.  Specifications and diagrams should be created to outline what this reference infrastructure looks like, as well as it's baseline cost and the incremental cost to scale up with volume.  Having some consistency in terms of infrastructure will save time and money as new countries / sites come online.  Here are some properties of the reference infrastructure: Standardized approach to setup of hardware Type and number of servers Defines application server, operating system, database, etc... - including vendor and specific versions Consistent naming conventions Provides a consistent base of terminology and understanding across environments Defines which ATG services run on which servers Production Staging BCC / Preview Each site can change as required to meet scale requirements Governance / organization It should be no surprise that the complex application we're talking about is backed by an equally complex organization.  One of the more challenging aspects of efficiently managing a series of complex applications is to ensure the proper level of governance and organization.  Here are some ideas and goals to work towards: Establish a committee to make enterprise-wide decisions that affect all sites Representation should be evenly distributed Should have a clear communication procedure Focus on high level business goals Evaluation of feature / function gaps and how that relates to ATG release schedule / roadmap Determine when to upgrade & ensure value will be realized Determine how to manage various levels of modules Who is responsible for maintaining corporate / country / site layers Determine a procedure for controlling what goes in the corporate foundation module Standardize on source code control, database, hardware, OS versions, J2EE app servers, development procedures, etc only use tested / proven versions - this is something that should be centralized so that every country / site does not have to worry about compatibility between versions Create a innovation team Quickly develop new features, perform proof of concepts All teams can benefit from their findings Summary At this point, it should be clear why the topics above (design, governance, organization, etc) are critical to being able to efficiently manage a complex application.  To summarize, it's all about competitive advantage...  You will need to reduce costs and improve time to market with the goal of providing a better experience for your end customers.  You can reduce cost by reducing development time, time allocated to testing (don't have to test the corporate foundation module over and over again - do it once), and optimizing operations.  With an efficient design, you can improve your time to market and your business will be more flexible  and agile.  Over time, you'll find that you're becoming more focused on offering functionality that is new to the market (creativity) and this will be rewarded - you're now a leader. In addition to the above, you'll realize soft benefits as well.  Your staff will be operating in a culture based on sharing.  You'll want to reward efforts to improve and enhance the foundation as this will benefit everyone.  This culture will inspire innovation, which can only lend itself to your competitive advantage.

  Read the article

• What tools do you use for 2D art/sprite creation?

  - by daemious

  What cheap/free tools do you use for 2D art and/or animation? I don't really like Gimp's interface, Paint.NET is limited and GraphicsGale is sort of archaic. Cosmigo ProMotion looks like it could be good, anyone use it? Seems a bit pricey at $78/92 but of course cheaper than Photoshop. I used to like Jasc Paint Shop Pro 7, but the newer versions Corel makes are more for photos. 2D Bones support would be handy also.

  Read the article

• Pluggable Rules for Entity Framework Code First

  - by Ricardo Peres

  Suppose you want a system that lets you plug custom validation rules on your Entity Framework context. The rules would control whether an entity can be saved, updated or deleted, and would be implemented in plain .NET. Yes, I know I already talked about plugable validation in Entity Framework Code First, but this is a different approach. An example API is in order, first, a ruleset, which will hold the collection of rules: 1: public interface IRuleset : IDisposable 2: { 3: void AddRule<T>(IRule<T> rule); 4: IEnumerable<IRule<T>> GetRules<T>(); 5: } Next, a rule: 1: public interface IRule<T> 2: { 3: Boolean CanSave(T entity, DbContext ctx); 4: Boolean CanUpdate(T entity, DbContext ctx); 5: Boolean CanDelete(T entity, DbContext ctx); 6: String Name 7: { 8: get; 9: } 10: } Let’s analyze what we have, starting with the ruleset: Only has methods for adding a rule, specific to an entity type, and to list all rules of this entity type; By implementing IDisposable, we allow it to be cancelled, by disposing of it when we no longer want its rules to be applied. A rule, on the other hand: Has discrete methods for checking if a given entity can be saved, updated or deleted, which receive as parameters the entity itself and a pointer to the DbContext to which the ruleset was applied; Has a name property for helping us identifying what failed. A ruleset really doesn’t need a public implementation, all we need is its interface. The private (internal) implementation might look like this: 1: sealed class Ruleset : IRuleset 2: { 3: private readonly IDictionary<Type, HashSet<Object>> rules = new Dictionary<Type, HashSet<Object>>(); 4: private ObjectContext octx = null; 5:  6: internal Ruleset(ObjectContext octx) 7: { 8: this.octx = octx; 9: } 10:  11: public void AddRule<T>(IRule<T> rule) 12: { 13: if (this.rules.ContainsKey(typeof(T)) == false) 14: { 15: this.rules[typeof(T)] = new HashSet<Object>(); 16: } 17:  18: this.rules[typeof(T)].Add(rule); 19: } 20:  21: public IEnumerable<IRule<T>> GetRules<T>() 22: { 23: if (this.rules.ContainsKey(typeof(T)) == true) 24: { 25: foreach (IRule<T> rule in this.rules[typeof(T)]) 26: { 27: yield return (rule); 28: } 29: } 30: } 31:  32: public void Dispose() 33: { 34: this.octx.SavingChanges -= RulesExtensions.OnSaving; 35: RulesExtensions.rulesets.Remove(this.octx); 36: this.octx = null; 37:  38: this.rules.Clear(); 39: } 40: } Basically, this implementation: Stores the ObjectContext of the DbContext to which it was created for, this is so that later we can remove the association; Has a collection - a set, actually, which does not allow duplication - of rules indexed by the real Type of an entity (because of proxying, an entity may be of a type that inherits from the class that we declared); Has generic methods for adding and enumerating rules of a given type; Has a Dispose method for cancelling the enforcement of the rules. A (really dumb) rule applied to Product might look like this: 1: class ProductRule : IRule<Product> 2: { 3: #region IRule<Product> Members 4:  5: public String Name 6: { 7: get 8: { 9: return ("Rule 1"); 10: } 11: } 12:  13: public Boolean CanSave(Product entity, DbContext ctx) 14: { 15: return (entity.Price > 10000); 16: } 17:  18: public Boolean CanUpdate(Product entity, DbContext ctx) 19: { 20: return (true); 21: } 22:  23: public Boolean CanDelete(Product entity, DbContext ctx) 24: { 25: return (true); 26: } 27:  28: #endregion 29: } The DbContext is there because we may need to check something else in the database before deciding whether to allow an operation or not. And here’s how to apply this mechanism to any DbContext, without requiring the usage of a subclass, by means of an extension method: 1: public static class RulesExtensions 2: { 3: private static readonly MethodInfo getRulesMethod = typeof(IRuleset).GetMethod("GetRules"); 4: internal static readonly IDictionary<ObjectContext, Tuple<IRuleset, DbContext>> rulesets = new Dictionary<ObjectContext, Tuple<IRuleset, DbContext>>(); 5:  6: private static Type GetRealType(Object entity) 7: { 8: return (entity.GetType().Assembly.IsDynamic == true ? entity.GetType().BaseType : entity.GetType()); 9: } 10:  11: internal static void OnSaving(Object sender, EventArgs e) 12: { 13: ObjectContext octx = sender as ObjectContext; 14: IRuleset ruleset = rulesets[octx].Item1; 15: DbContext ctx = rulesets[octx].Item2; 16:  17: foreach (ObjectStateEntry entry in octx.ObjectStateManager.GetObjectStateEntries(EntityState.Added)) 18: { 19: Object entity = entry.Entity; 20: Type realType = GetRealType(entity); 21:  22: foreach (dynamic rule in (getRulesMethod.MakeGenericMethod(realType).Invoke(ruleset, null) as IEnumerable)) 23: { 24: if (rule.CanSave(entity, ctx) == false) 25: { 26: throw (new Exception(String.Format("Cannot save entity {0} due to rule {1}", entity, rule.Name))); 27: } 28: } 29: } 30:  31: foreach (ObjectStateEntry entry in octx.ObjectStateManager.GetObjectStateEntries(EntityState.Deleted)) 32: { 33: Object entity = entry.Entity; 34: Type realType = GetRealType(entity); 35:  36: foreach (dynamic rule in (getRulesMethod.MakeGenericMethod(realType).Invoke(ruleset, null) as IEnumerable)) 37: { 38: if (rule.CanDelete(entity, ctx) == false) 39: { 40: throw (new Exception(String.Format("Cannot delete entity {0} due to rule {1}", entity, rule.Name))); 41: } 42: } 43: } 44:  45: foreach (ObjectStateEntry entry in octx.ObjectStateManager.GetObjectStateEntries(EntityState.Modified)) 46: { 47: Object entity = entry.Entity; 48: Type realType = GetRealType(entity); 49:  50: foreach (dynamic rule in (getRulesMethod.MakeGenericMethod(realType).Invoke(ruleset, null) as IEnumerable)) 51: { 52: if (rule.CanUpdate(entity, ctx) == false) 53: { 54: throw (new Exception(String.Format("Cannot update entity {0} due to rule {1}", entity, rule.Name))); 55: } 56: } 57: } 58: } 59:  60: public static IRuleset CreateRuleset(this DbContext context) 61: { 62: Tuple<IRuleset, DbContext> ruleset = null; 63: ObjectContext octx = (context as IObjectContextAdapter).ObjectContext; 64:  65: if (rulesets.TryGetValue(octx, out ruleset) == false) 66: { 67: ruleset = rulesets[octx] = new Tuple<IRuleset, DbContext>(new Ruleset(octx), context); 68: 69: octx.SavingChanges += OnSaving; 70: } 71:  72: return (ruleset.Item1); 73: } 74: } It relies on the SavingChanges event of the ObjectContext to intercept the saving operations before they are actually issued. Yes, it uses a bit of dynamic magic! Very handy, by the way! So, let’s put it all together: 1: using (MyContext ctx = new MyContext()) 2: { 3: IRuleset rules = ctx.CreateRuleset(); 4: rules.AddRule(new ProductRule()); 5:  6: ctx.Products.Add(new Product() { Name = "xyz", Price = 50000 }); 7:  8: ctx.SaveChanges(); //an exception is fired here 9:  10: //when we no longer need to apply the rules 11: rules.Dispose(); 12: } Feel free to use it and extend it any way you like, and do give me your feedback! As a final note, this can be easily changed to support plain old Entity Framework (not Code First, that is), if that is what you are using.

  Read the article

• Suggestions for connecting .NET WPF GUI with Java SE Server

  - by Sam Goldberg

  BACKGROUND We are building a Java (SE) trading application which will be monitoring market data and sending trade messages based on the market data, and also on user defined configuration parameters. We are planning to provide the user with a thin client, built in .NET (WPF) for managing the parameters, controlling the server behavior, and viewing the current state of the trading. The client doesn't need real-time updates; it will instead update the view once every few seconds (or whatever interval is configured by the user). The client has about 6 different operations it needs to perform with the server, for example: CRUD with configuration parameters query subset of the data receive updates of current positions from server It is possible that most of the different operations (except for receiving data) are just different flavors of managing the configuration parameters, but it's too early in our analysis for us to be sure. To connect the client with the server, we have been considering using: SOAP Web Service RESTful service building a custom TCP/IP based API (text or xml) (least preferred - but we use this approach with other applications we have) As best as I understand, pros and cons of the different web service flavors are: SOAP pro: totally automated in .NET (and Java), modifying server side interface require no code changes in communication layer, just running refresh on Web Service reference to regenerate the classes. con: more overhead in the communication layer sending more text, etc. We're not using J2EE container so maybe doesn't work so well with J2SE REST pro: lighter weight, less data. Has good .NET and Java support. (I don't have any real experience with this, so don't know what other benefits it has.) con: client will not be automatically aware if there are any new operations or properties added (?), so communication layer needs to be updated by developer if server interface changes. con: (both approaches) Server cannot really push updates to the client at regular intervals (?) (However, we won't mind if client polls the server to get updates.) QUESTION What are your opinions on the above options or suggestions for other ways to connect the 2 parts? (Ideally, we don't want to put much work into the communication layer, because it's not the significant part of the application so the more off-the-shelf and automated the better.)

  Read the article

• WebCenter Customer Spotlight: College of American Pathologists

  - by me

  Author: Peter Reiser - Social Business Evangelist, Oracle WebCenter  Solution Summary College of American Pathologists Goes Live with OracleWebCenter - Imaging, AP Invoice Automation, and EBS Managed Attachment with Support for Imaging ContentThe College of American Pathologists (CAP), the leading organization of board-certified pathologists serving more then 18,000 physician members, 7,000 laboratories are accredited by the CAP, and approximately 22,000 laboratories are enrolled in the College’s proficiency testing programs. The business objective was to content-enable their Oracle E-Business Suite (EBS) enterprise application by combining the best of Imaging and Manage Attachment functionality providing a unique opportunity for the business to have unprecedented access to both structure and unstructured content from within their enterprise application. The solution improves customer services turnaround time, provides better compliance and improves maintenance and management of the technology infrastructure. Company OverviewThe College of American Pathologists (CAP), celebrating 50 years as the gold standard in laboratory accreditation, is a medical society serving more than 17,000 physician members and the global laboratory community. It is the world’s largest association composed exclusively of board certified pathologists and is the worldwide leader in laboratory quality assurance. The College advocates accountable, high-quality, and cost-effective patient care. The more than 17,000 pathologist members of the College of American Pathologists represent board-certified pathologists and pathologists in training worldwide. More than 7,000 laboratories are accredited by the CAP, and approximately 23,000 laboratories are enrolled in the College’s proficiency testing programs.  Business ChallengesThe CAP business objective was to content-enable their Oracle E-Business Suite (EBS) enterprise application by combining the best of Imaging and Manage Attachment functionality providing a unique opportunity for the business to have unprecedented access to both structure and unstructured content from within their enterprise application.  Bring more flexibility to systems and programs in order to adapt quickly Get a 360 degree view of the customer Reduce cost of running the business Solution DeployedWith the help of Oracle Consulting, the customer implemented Oracle WebCenter Content as the centralized E-Business Suite Document Repository.  The solution enables to capture, present and manage all unstructured content (PDFs,word processing documents, scanned images, etc.) related to Oracle E-Business Suite transactions and exposing the related content using the familiar EBS User Interface. Business ResultsThe CAP achieved following benefits from the implemented solution: Managed Attachment Solution Align with strategic Oracle Fusion Middleware platform Integrate with the CAP existing data capture capabilities Single user interface provided by the Managed Attachment solution for all content Better compliance and improved collaboration  Account Payables Invoice Processing Imaging Solution Automated invoice management eliminating dependency on paper materials and improving compliance, collaboration and accuracy A single repository to house and secure scanned invoices and all supplemental documents Greater management visibility of invoice entry process Additional Information CAP OpenWorld Presentation Oracle WebCenter Content Oracle Webcenter Capture Oracle WebCenter Imaging Oracle  Consulting

  Read the article

• Don't Cut Corners on Server Defragmentation

  Hard-Core Hardware: Fragmentation may not cut it as a big screen villain, but it remains a threat and handicap to optimal server performance. In this era of massive hard drives and virtualization, minimizing fragmentation is more critical than ever.

  Read the article

• Don't Cut Corners on Server Defragmentation

  Hard-Core Hardware: Fragmentation may not cut it as a big screen villain, but it remains a threat and handicap to optimal server performance. In this era of massive hard drives and virtualization, minimizing fragmentation is more critical than ever.

  Read the article

• wifi problems with lenovo g580 on kubuntu-13.04-desktop-amd64

  - by user203963

  i have a wifi connection problem in lenovo g580 on kubuntu-13.04-desktop-amd64. ethernet cable is working properly but wifi does'nt connect below are some hardware information sudo lshw -class network gives *-network description: Ethernet interface product: AR8162 Fast Ethernet vendor: Qualcomm Atheros physical id: 0 bus info: pci@0000:01:00.0 logical name: eth0 version: 10 serial: 20:89:84:3d:e9:10 size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm pciexpress msi msix bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=alx driverversion=1.2.3 duplex=full firmware=N/A ip=192.168.0.106 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:16 memory:90500000-9053ffff ioport:2000(size=128) *-network description: Network controller product: BCM4313 802.11b/g/n Wireless LAN Controller vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:02:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=bcma-pci-bridge latency=0 resources: irq:17 memory:90400000-90403fff *-network description: Wireless interface physical id: 3 logical name: wlan0 serial: 68:94:23:fa:2c:d9 capabilities: ethernet physical wireless configuration: broadcast=yes driver=brcmsmac driverversion=3.8.0-19-generic firmware=N/A link=no multicast=yes wireless=IEEE 802.11bgn lsubs gives Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 0489:e032 Foxconn / Hon Hai Bus 002 Device 003: ID 04f2:b2e2 Chicony Electronics Co., Ltd lspci gives 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4) 00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4) 00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation HM76 Express Chipset LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04) 00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04) 01:00.0 Ethernet controller: Qualcomm Atheros AR8162 Fast Ethernet (rev 10) 02:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01) Does anyone knows the solution? rfkill list all gives 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 1: phy0: Wireless LAN Soft blocked: yes Hard blocked: no 2: ideapad_wlan: Wireless LAN Soft blocked: yes Hard blocked: no 3: ideapad_bluetooth: Bluetooth Soft blocked: no Hard blocked: no

  Read the article

• Network Security Risk Assessment

  - by Chandra Vennapoosa

  Information that is gathered everyday regarding client and business transactions are either stored on servers or on user computers. These stored information are considered important and sensitive in the company's interest and hence they need to be protected from network attacks and other unknown circumstances. Network administrator manage and protect the network through a series of passwords and data encryption. Topics First Step for Risk Assessment Identifying Essential Data/System/Hardware Identifying External Blocks Measuring the Risk to Your Enterprise Calculating the Assets Value The Liquid Financial Assets Value Getting Everything Together

  Read the article

• Questions re: Eclipse Jobs API

  - by BenCole

  Similar to http://stackoverflow.com/questions/8738160/eclipse-jobs-api-for-a-stand-alone-swing-project This question mentions the Jobs API from the Eclipse IDE: ...The disadvantage of the pre-3.0 approach was that the user had to wait until an operation completed before the UI became responsive again. The UI still provided the user the ability to cancel the currently running operation but no other work could be done until the operation completed. Some operations were performed in the background (resource decoration and JDT file indexing are two such examples) but these operations were restricted in the sense that they could not modify the workspace. If a background operation did try to modify the workspace, the UI thread would be blocked if the user explicitly performed an operation that modified the workspace and, even worse, the user would not be able to cancel the operation. A further complication with concurrency was that the interaction between the independent locking mechanisms of different plug-ins often resulted in deadlock situations. Because of the independent nature of the locks, there was no way for Eclipse to recover from the deadlock, which forced users to kill the application... ...The functionality provided by the workspace locking mechanism can be broken down into the following three aspects: Resource locking to ensure multiple operations did not concurrently modify the same resource Resource change batching to ensure UI stability during an operation Identification of an appropriate time to perform incremental building With the introduction of the Jobs API, these areas have been divided into separate mechanisms and a few additional facilities have been added. The following list summarizes the facilities added. Job class: support for performing operations or other work in the background. ISchedulingRule interface: support for determining which jobs can run concurrently. WorkspaceJob and two IWorkspace#run() methods: support for batching of delta change notifications. Background auto-build: running of incremental build at a time when no other running operations are affecting resources. ILock interface: support for deadlock detection and recovery. Job properties for configuring user feedback for jobs run in the background. The rest of this article provides examples of how to use the above-mentioned facilities... In regards to above API, is this an implementation of a particular design pattern? Which one?

  Read the article

• Announcement Oracle Virtual Networking

  - by uwes

  Oracle Virtual Networking information and collateral are now available on Oracle.com and Oracle Technical Network (OTN). Oracle Virtual Networking revolutionizes data center economics with a complete portfolio of hardware and software products to provision and manage virtual I/O and networks for servers and storage. These products are available for ordering now. They were part of the Xsigo acquisition on November 6, 2012. For More Information Go To: Oracle Fabric Interconnect oracle.com OTN Oracle Fabric Manager oracle.com OTN Oracle Fabric Monitor oracle.com OTN Oracle SDN oracle.com OTN

  Read the article

• Reminder - Article about SharePoint localization

  - by panjkov

  I already wrote about SharePoint localization – in January I published blog post with links for downloads of Language Interface Packs for SharePoint 2010 for official languages in Bosnia and Herzegovina (BiH). Approximately at same time, I wrote detailed article for web portal www.hardwarebase.net , which is published in April 2012. Title of the article is “Localize your SharePoint servers for BiH languages”, and article explains process of installing SharePoint LIP and using it on Team Site. Full...(read more)

  Read the article

• Windows Azure Recipe: High Performance Computing

  - by Clint Edmonson

  One of the most attractive ways to use a cloud platform is for parallel processing. Commonly known as high-performance computing (HPC), this approach relies on executing code on many machines at the same time. On Windows Azure, this means running many role instances simultaneously, all working in parallel to solve some problem. Doing this requires some way to schedule applications, which means distributing their work across these instances. To allow this, Windows Azure provides the HPC Scheduler. This service can work with HPC applications built to use the industry-standard Message Passing Interface (MPI). Software that does finite element analysis, such as car crash simulations, is one example of this type of application, and there are many others. The HPC Scheduler can also be used with so-called embarrassingly parallel applications, such as Monte Carlo simulations. Whatever problem is addressed, the value this component provides is the same: It handles the complex problem of scheduling parallel computing work across many Windows Azure worker role instances. Drivers Elastic compute and storage resources Cost avoidance Solution Here’s a sketch of a solution using our Windows Azure HPC SDK: Ingredients Web Role – this hosts a HPC scheduler web portal to allow web based job submission and management. It also exposes an HTTP web service API to allow other tools (including Visual Studio) to post jobs as well. Worker Role – typically multiple worker roles are enlisted, including at least one head node that schedules jobs to be run among the remaining compute nodes. Database – stores state information about the job queue and resource configuration for the solution. Blobs, Tables, Queues, Caching (optional) – many parallel algorithms persist intermediate and/or permanent data as a result of their processing. These fast, highly reliable, parallelizable storage options are all available to all the jobs being processed. Training Here is a link to online Windows Azure training labs where you can learn more about the individual ingredients described above. (Note: The entire Windows Azure Training Kit can also be downloaded for offline use.) Windows Azure HPC Scheduler (3 labs)  The Windows Azure HPC Scheduler includes modules and features that enable you to launch and manage high-performance computing (HPC) applications and other parallel workloads within a Windows Azure service. The scheduler supports parallel computational tasks such as parametric sweeps, Message Passing Interface (MPI) processes, and service-oriented architecture (SOA) requests across your computing resources in Windows Azure. With the Windows Azure HPC Scheduler SDK, developers can create Windows Azure deployments that support scalable, compute-intensive, parallel applications. See my Windows Azure Resource Guide for more guidance on how to get started, including links web portals, training kits, samples, and blogs related to Windows Azure.

  Read the article

< Previous Page | 275 276 277 278 279 280 281 282 283 284 285 286  | Next Page >