Search Results

Search found 2253 results on 91 pages for 'grep'.

Page 28/91 | < Previous Page | 24 25 26 27 28 29 30 31 32 33 34 35  | Next Page >

• Cannot find libmysqlclient under /usr. while build PHP 5.2 from source on Ubuntu 12.4

  - by fkniya

  I was trying to build PHP 5.2.17 from source on Ubuntu 12.4 64bit using this configuration: ./configure --prefix=/opt/php5.2 --with-config-file-path=/opt/php5.2 --with-mysql but I keep getting this error: configure: error: Cannot find libmysqlclient under /usr. Note that the MySQL client library is not bundled anymore! I suspected that dev package for mysql is not installed so tried installing libmysqlclient-dev but it was already there. Any Idea how to resolve this? EDIT1: I minimized the configure command so it just focuses to mysql. also I'm running a 64bit version of ubuntu. EDIT2: tried running ldconfig -v |grep mysql and here is the output # ldconfig -v |grep mysql /sbin/ldconfig.real: Path `/lib/x86_64-linux-gnu' given more than once /sbin/ldconfig.real: Path `/usr/lib/x86_64-linux-gnu' given more than once /sbin/ldconfig.real: Cannot stat /usr/lib/x86_64-linux-gnu/libnss_db.so: No such file or directory libmysqlclient.so.18 -> libmysqlclient_r.so.18.0.0 libmysqlpp.so.3 -> libmysqlpp.so.3.1.0

  Read the article

• Substituting variables in a loop?

  - by jksl

  I am trying to write a loop in R but I think the nomenclature is not correct as it does not create the new objects, here is a simplified example of what I am trying to do: for i in (1:8) { List_i <-List colsToGrab_i <-grep(predefinedRegex_i, colnames(List_i$table)) List_i$table <- List_i$table[,predefinedRegex_i] } I have created 'predefinedRegex'es 1:8 which the grep should use to search The loop creates an object called "List_i" and then fails to find "predefinedRegex_i". I have tried putting quotes around the "i" and $ in front of the i but these do not work. Any help much appreciated. Thank you.

  Read the article

• C++ Program performs better when piped

  - by ET1 Nerd

  I haven't done any programming in a decade. I wanted to get back into it, so I made this little pointless program as practice. The easiest way to describe what it does is with output of my --help codeblock: ./prng_bench --help ./prng_bench: usage: ./prng_bench $N $B [$T] This program will generate an N digit base(B) random number until all N digits are the same. Once a repeating N digit base(B) number is found, the following statistics are displayed: -Decimal value of all N digits. -Time & number of tries taken to randomly find. Optionally, this process is repeated T times. When running multiple repititions, averages for all N digit base(B) numbers are displayed at the end, as well as total time and total tries. My "problem" is that when the problem is "easy", say a 3 digit base 10 number, and I have it do a large number of passes the "total time" is less when piped to grep. ie: command ; command |grep took : ./prng_bench 3 10 999999 ; ./prng_bench 3 10 999999|grep took .... Pass# 999999: All 3 base(10) digits = 3 base(10). Time: 0.00005 secs. Tries: 23 It took 191.86701 secs & 99947208 tries to find 999999 repeating 3 digit base(10) numbers. An average of 0.00019 secs & 99 tries was needed to find each one. It took 159.32355 secs & 99947208 tries to find 999999 repeating 3 digit base(10) numbers. If I run the same command many times w/o grep time is always VERY close. I'm using srand(1234) for now, to test. The code between my calls to clock_gettime() for start and stop do not involve any stream manipulation, which would obviously affect time. I realize this is an exercise in futility, but I'd like to know why it behaves this way. Below is heart of the program. Here's a link to the full source on DB if anybody wants to compile and test. https://www.dropbox.com/s/6olqnnjf3unkm2m/prng_bench.cpp clock_gettime() requires -lrt. for (int pass_num=1; pass_num<=passes; pass_num++) { //Executes $passes # of times. clock_gettime(CLOCK_PROCESS_CPUTIME_ID, &temp_time); //get time start_time = timetodouble(temp_time); //convert time to double, store as start_time for(i=1, tries=0; i!=0; tries++) { //loops until 'comparison for' fully completes. counts reps as 'tries'. <------------ for (i=0; i<Ndigits; i++) //Move forward through array. | results[i]=(rand()%base); //assign random num of base to element (digit). | /*for (i=0; i<Ndigits; i++) //---Debug Lines--------------- | std::cout<<" "<<results[i]; //---a LOT of output.---------- | std::cout << "\n"; //---Comment/decoment to disable/enable.*/ // | for (i=Ndigits-1; i>0 && results[i]==results[0]; i--); //Move through array, != element breaks & i!=0, new digits drawn. -| } //If all are equal i will be 0, nested for condition satisfied. -| clock_gettime(CLOCK_PROCESS_CPUTIME_ID, &temp_time); //get time draw_time = (timetodouble(temp_time) - start_time); //convert time to dbl, subtract start_time, set draw_time to diff. total_time += draw_time; //add time for this pass to total. total_tries += tries; //add tries for this pass to total. /*Formated output for each pass: Pass# ---: All -- base(--) digits = -- base(10) Time: ----.---- secs. Tries: ----- (LINE) */ std::cout<<"Pass# "<<std::setw(width_pass)<<pass_num<<": All "<<Ndigits<<" base("<<base<<") digits = " <<std::setw(width_base)<<results[0]<<" base(10). Time: "<<std::setw(width_time)<<draw_time <<" secs. Tries: "<<tries<<"\n"; } if(passes==1) return 0; //No need for totals and averages of 1 pass. /* It took ----.---- secs & ------ tries to find --- repeating -- digit base(--) numbers. (LINE) An average of ---.---- secs & ---- tries was needed to find each one. (LINE)(LINE) */ std::cout<<"It took "<<total_time<<" secs & "<<total_tries<<" tries to find " <<passes<<" repeating "<<Ndigits<<" digit base("<<base<<") numbers.\n" <<"An average of "<<total_time/passes<<" secs & "<<total_tries/passes <<" tries was needed to find each one. \n\n"; return 0;

  Read the article

• Svn: how to remove all deleted files from repository ?

  - by Patrick

  I have a script in which I add all new files before to commit my working copy to my repository with this line: svn status | grep ^\? | awk '{print $2}' | xargs svn add I now want to add a line that delete from repository all deleted files in my working copy. In other terms, I cannot specify them one by one, and I need to detect them with svn status and then automatically remove them. However the line doesn't work. svn status | grep ^\! | awk '{print $2}' | xargs svn --force delete As you can see I've replaced "?" with "!" and "add" with "--force delete" Could you tell me why it doesn't work ? ps. I know it is a risky procedure. I've already discussed all about it. thanks thanks

  Read the article

• How to get the number of files in a folder as a variable?

  - by Jason

  Using bash, how can one get the number of files in a folder, excluding directories from a shell script without the interpreter complaining? With the help of a friend, I've tried $files=$(find ../ -maxdepth 1 -type f | sort -n) $num=$("ls -l" | "grep ^-" | "wc -l") which returns from the command line: ../1-prefix_blended_fused.jpg: No such file or directory ls -l : command not found grep ^-: command not found wc -l: command not found respectively. These commands work on the command line, but NOT with a bash script. Given a file filled with image files formatted like 1-pano.jpg, I want to grab all the images in the directory to get the largest numbered file to tack onto the next image being processed. Why the discrepancy?

  Read the article

• How do I stop and repair a RAID 5 array that has failed and has I/O pending?

  - by Ben Hymers

  The short version: I have a failed RAID 5 array which has a bunch of processes hung waiting on I/O operations on it; how can I recover from this? The long version: Yesterday I noticed Samba access was being very sporadic; accessing the server's shares from Windows would randomly lock up explorer completely after clicking on one or two directories. I assumed it was Windows being a pain and left it. Today the problem is the same, so I did a little digging; the first thing I noticed was that running ps aux | grep smbd gives a lot of lines like this: ben 969 0.0 0.2 96088 4128 ? D 18:21 0:00 smbd -F root 1708 0.0 0.2 93468 4748 ? Ss 18:44 0:00 smbd -F root 1711 0.0 0.0 93468 1364 ? S 18:44 0:00 smbd -F ben 3148 0.0 0.2 96052 4160 ? D Mar07 0:00 smbd -F ... There are a lot of processes stuck in the "D" state. Running ps aux | grep " D" shows up some other processes including my nightly backup script, all of which need to access the volume mounted on my RAID array at some point. After some googling, I found that it might be down to the RAID array failing, so I checked /proc/mdstat, which shows this: ben@jack:~$ cat /proc/mdstat Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md0 : active raid5 sdb1[3](F) sdc1[1] sdd1[2] 2930271872 blocks level 5, 64k chunk, algorithm 2 [3/2] [_UU] unused devices: <none> And running mdadm --detail /dev/md0 gives this: ben@jack:~$ sudo mdadm --detail /dev/md0 /dev/md0: Version : 00.90 Creation Time : Sat Oct 31 20:53:10 2009 Raid Level : raid5 Array Size : 2930271872 (2794.53 GiB 3000.60 GB) Used Dev Size : 1465135936 (1397.26 GiB 1500.30 GB) Raid Devices : 3 Total Devices : 3 Preferred Minor : 0 Persistence : Superblock is persistent Update Time : Mon Mar 7 03:06:35 2011 State : active, degraded Active Devices : 2 Working Devices : 2 Failed Devices : 1 Spare Devices : 0 Layout : left-symmetric Chunk Size : 64K UUID : f114711a:c770de54:c8276759:b34deaa0 Events : 0.208245 Number Major Minor RaidDevice State 3 8 17 0 faulty spare rebuilding /dev/sdb1 1 8 33 1 active sync /dev/sdc1 2 8 49 2 active sync /dev/sdd1 I believe this says that sdb1 has failed, and so the array is running with two drives out of three 'up'. Some advice I found said to check /var/log/messages for notices of failures, and sure enough there are plenty: ben@jack:~$ grep sdb /var/log/messages ... Mar 7 03:06:35 jack kernel: [4525155.384937] md/raid:md0: read error NOT corrected!! (sector 400644912 on sdb1). Mar 7 03:06:35 jack kernel: [4525155.389686] md/raid:md0: read error not correctable (sector 400644920 on sdb1). Mar 7 03:06:35 jack kernel: [4525155.389686] md/raid:md0: read error not correctable (sector 400644928 on sdb1). Mar 7 03:06:35 jack kernel: [4525155.389688] md/raid:md0: read error not correctable (sector 400644936 on sdb1). Mar 7 03:06:56 jack kernel: [4525176.231603] sd 0:0:1:0: [sdb] Unhandled sense code Mar 7 03:06:56 jack kernel: [4525176.231605] sd 0:0:1:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE Mar 7 03:06:56 jack kernel: [4525176.231608] sd 0:0:1:0: [sdb] Sense Key : Medium Error [current] [descriptor] Mar 7 03:06:56 jack kernel: [4525176.231623] sd 0:0:1:0: [sdb] Add. Sense: Unrecovered read error - auto reallocate failed Mar 7 03:06:56 jack kernel: [4525176.231627] sd 0:0:1:0: [sdb] CDB: Read(10): 28 00 17 e1 5f bf 00 01 00 00 To me it is clear that device sdb has failed, and I need to stop the array, shutdown, replace it, reboot, then repair the array, bring it back up and mount the filesystem. I cannot hot-swap a replacement drive in, and don't want to leave the array running in a degraded state. I believe I am supposed to unmount the filesystem before stopping the array, but that is failing, and that is where I'm stuck now: ben@jack:~$ sudo umount /storage umount: /storage: device is busy. (In some cases useful info about processes that use the device is found by lsof(8) or fuser(1)) It is indeed busy; there are some 30 or 40 processes waiting on I/O. What should I do? Should I kill all these processes and try again? Is that a wise move when they are 'uninterruptable'? What would happen if I tried to reboot? Please let me know what you think I should do. And please ask if you need any extra information to diagnose the problem or to help!

  Read the article

• Locating Rogue Perl Script

  - by Gary Garside

  I've been trying to source the location of a perl script which is causing havoc on a server which i control. I'm also trying to find out exactly how this script was installed on the server - my best guess is through a wordpress exploit. The server is a basic web setup running Ubuntu 9.04, Apache and MySQL. I use IPTables for firewall, the site runs around 20 sites and the load never really creeps above 0.7. From what i can see the script is making outbound connection to other servers (most likely trying to brute force entry). Here is a top dump of one of the processes: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 22569 www-data 20 0 22784 3216 780 R 100 0.2 47:00.60 perl The command the process is running is /usr/sbin/sshd . I've tried to find an exact file name but im having no luck... i've ran a lsof -p PID and here is the output: COMMAND PID USER FD TYPE DEVICE SIZE NODE NAME perl 22569 www-data cwd DIR 8,6 4096 2 / perl 22569 www-data rtd DIR 8,6 4096 2 / perl 22569 www-data txt REG 8,6 10336 162220 /usr/bin/perl perl 22569 www-data mem REG 8,6 26936 170219 /usr/lib/perl/5.10.0/auto/Socket/Socket.so perl 22569 www-data mem REG 8,6 22808 170214 /usr/lib/perl/5.10.0/auto/IO/IO.so perl 22569 www-data mem REG 8,6 39112 145112 /lib/libcrypt-2.9.so perl 22569 www-data mem REG 8,6 1502512 145124 /lib/libc-2.9.so perl 22569 www-data mem REG 8,6 130151 145113 /lib/libpthread-2.9.so perl 22569 www-data mem REG 8,6 542928 145122 /lib/libm-2.9.so perl 22569 www-data mem REG 8,6 14608 145125 /lib/libdl-2.9.so perl 22569 www-data mem REG 8,6 1503704 162222 /usr/lib/libperl.so.5.10.0 perl 22569 www-data mem REG 8,6 135680 145116 /lib/ld-2.9.so perl 22569 www-data 0r FIFO 0,6 157216 pipe perl 22569 www-data 1w FIFO 0,6 197642 pipe perl 22569 www-data 2w FIFO 0,6 197642 pipe perl 22569 www-data 3w FIFO 0,6 197642 pipe perl 22569 www-data 4u IPv4 383991 TCP outsidesoftware.com:56869->server12.34.56.78.live-servers.net:www (ESTABLISHED) My gut feeling is outsidesoftware.com is also under attacK? Or possibly being used as a tunnel. I've managed to find a number of rouge files in /tmp and /var/tmp, here is a brief output of one of these files: #!/usr/bin/perl # this spreader is coded by xdh # xdh@xxxxxxxxxxx # only for testing... my @nickname = ("vn"); my $nick = $nickname[rand scalar @nickname]; my $ircname = $nickname[rand scalar @nickname]; #system("kill -9 `ps ax |grep httpdse |grep -v grep|awk '{print $1;}'`"); my $processo = '/usr/sbin/sshd'; The full file contents can be viewed here: http://pastebin.com/yenFRrGP Im trying to achieve a couple of things here... Firstly i need to stop these processes from running. Either by disabling outbound SSH or any IP Tables rules etc... these scripts have been running for around 36 hours now and my main concern is to stop these things running and respawning by themselves. Secondly i need to try and source where and how these scripts have been installed. If anybody has any advise on what to look for in access logs or anything else i would be really grateful. Thanks in advance

  Read the article

• Yet another (13)Permission denied error on Apache2 server

  - by lollercoaster

  I just can't figure it out. I'm running apache2 on a Ubuntu 10.04 i386 server. Whenever I visit my server (has an IP address, and is connected to internet with static IP xxx.xxx.xxx.xxx) so that's not the problem) in browser, mysub.domain.edu (renamed here), I get the following: Forbidden You don't have permission to access /index.html on this server The apache2 error log confirms this: [Mon Apr 18 02:38:20 2011] [error] [client zzz.zzz.zzz.zzz] (13)Permission denied: access to / denied I'll try to provide all necessary information below: 1) Contents of /etc/apache2/httpd.conf DirectoryIndex index.html index.php 2) Contents of /etc/apache2/sites-available/default <VirtualHost *:80> ServerAdmin [email protected] DocumentRoot /home/myusername/htdocs <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory "/home/myusername/htdocs/"> Options Indexes FollowSymLinks MultiViews AllowOverride None order allow,deny allow from all DirectoryIndex index.html index.php Satisfy any </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog /var/log/apache2/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/access.log combined Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> ServerName mysub.domain.edu </VirtualHost> 3) Contents of /etc/apache2/sites-enabled/000-default <VirtualHost *:80> ServerAdmin [email protected] DocumentRoot /home/myusername/htdocs <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory "/home/myusername/htdocs/"> Options Indexes FollowSymLinks MultiViews AllowOverride None order allow,deny allow from all DirectoryIndex index.html index.php Satisfy any </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog /var/log/apache2/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/access.log combined Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> ServerName mysub.domain.edu </VirtualHost> 4) Result of ls -l (when I'm using sudo -i to be root): root@myserver:/home/myusername# ls -l total 4 drwxr-xr-x 2 www-data root 4096 2011-04-18 03:04 htdocs 5) ps auxwww | grep -i apache root@myserver:/home# ps auxwww | grep -i apache root 15121 0.0 0.4 5408 2544 ? Ss 16:55 0:00 /usr/sbin/apache2 -k start www-data 15122 0.0 0.3 5180 1760 ? S 16:55 0:00 /usr/sbin/apache2 -k start www-data 15123 0.0 0.5 227020 2788 ? Sl 16:55 0:00 /usr/sbin/apache2 -k start www-data 15124 0.0 0.5 227020 2864 ? Sl 16:55 0:00 /usr/sbin/apache2 -k start root 29133 0.0 0.1 3320 680 pts/0 R+ 16:58 0:00 grep --color=auto -i apache 6) ls -al /home/myusername/htdocs/ root@myserver:/# ls -al /home/myusername/htdocs/ total 20 drwxr-xr-x 2 www-data root 4096 2011-04-18 03:04 . drw-r--r-- 4 myusername myusername 4096 2011-04-18 02:13 .. -rw-r--r-- 1 root root 69 2011-04-18 02:14 index.html I'm not currently using any .htaccess files in my web root (htdocs) folder in my user folder. I don't know what is wrong, I've been trying to fix his for over 12 hours and I've gotten nowhere. If you have any suggestions, I'm all ears...

  Read the article

• Error on installing SVN extension with pecl

  - by thedp

  Hello, I'm trying to install the following PHP extension: http://php.net/manual/en/book.svn.php But when I do pecl install svn-beta I receive an error message that it can't locate the svn_client.h file. I searched the net but couldn't find any useful reference to this error. Thank you for your help. Installation result: root@myUbuntu:/home/thedp# pecl install svn-beta downloading svn-0.5.1.tgz ... Starting to download svn-0.5.1.tgz (23,563 bytes) .....done: 23,563 bytes 4 source files, building running: phpize Configuring for: PHP Api Version: 20041225 Zend Module Api No: 20060613 Zend Extension Api No: 220060519 1. Please provide the prefix of Subversion installation : autodetect 1-1, 'all', 'abort', or Enter to continue: 1. Please provide the prefix of the APR installation used with Subversion : autodetect 1-1, 'all', 'abort', or Enter to continue: building in /var/tmp/pear-build-root/svn-0.5.1 running: /tmp/pear/temp/svn/configure --with-svn --with-svn-apr checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for a sed that does not truncate output... /bin/sed checking for gcc... gcc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc and cc understand -c and -o together... yes checking for system library directory... lib checking if compiler supports -R... no checking if compiler supports -Wl,-rpath,... yes checking build system type... i686-pc-linux-gnu checking host system type... i686-pc-linux-gnu checking target system type... i686-pc-linux-gnu checking for PHP prefix... /usr checking for PHP includes... -I/usr/include/php5 -I/usr/include/php5/main -I/usr/include/php5/TSRM -I/usr/include/php5/Zend -I/usr/include/php5/ext -I/usr/include/php5/ext/date/lib -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 checking for PHP extension directory... /usr/lib/php5/20060613+lfs checking for PHP installed headers prefix... /usr/include/php5 checking for re2c... no configure: WARNING: You will need re2c 0.12.0 or later if you want to regenerate PHP parsers. checking for gawk... no checking for nawk... nawk checking if nawk is broken... no checking for svn support... yes, shared checking for specifying the location of apr for svn... yes, shared checking for svn includes... configure: error: failed to find svn_client.h ERROR: `/tmp/pear/temp/svn/configure --with-svn --with-svn-apr' failed

  Read the article

• Cannot connect to MySQL over TCP locally - Connection Timeout - Ubuntu 9.04

  - by gav

  I am running Ubuntu and am ultimately trying to connect Tomcat to my MySQL database using JDBC. It has worked previously but after a reboot the instance now fails to connect. Both Tomcat 6 and MySQL 5.0.75 are on the same machine Connection string: jdbc:mysql:///localhost:3306 I can connect to MySQL on the command line using the mysql command The my.cnf file is pretty standard (Available on request) has bind address: 127.0.0.1 I cannot Telnet to the MySQL port despite netstat saying MySQL is listening I have one IpTables rule to forward 80 - 8080 and no firewall I'm aware of. I'm pretty new to this and I'm not sure what else to test. I don't know whether I should be looking in etc/interfaces and if I did what to look for. It's weird because it used to work but after a reboot it's down so I must have changed something.... :). I realise a timeout indicates the server is not responding and I assume it's because the request isn't actually getting through. I installed MySQL via apt-get and Tomcat manually. MySqld processes root@88:/var/log/mysql# ps -ef | grep mysqld root 21753 1 0 May27 ? 00:00:00 /bin/sh /usr/bin/mysqld_safe mysql 21792 21753 0 May27 ? 00:00:00 /usr/sbin/mysqld --basedir=/usr --datadir=/var/lib/mysql --user=mysql --pid-file=/var/run/mysqld/mysqld.pid --skip-external-locking --port=3306 --socket=/var/run/mysqld/mysqld.sock root 21793 21753 0 May27 ? 00:00:00 logger -p daemon.err -t mysqld_safe -i -t mysqld root 21888 13676 0 11:23 pts/1 00:00:00 grep mysqld Netstat root@88:/var/log/mysql# netstat -lnp | grep mysql tcp 0 0 0.0.0.0:3306 0.0.0.0:* LISTEN 21792/mysqld unix 2 [ ACC ] STREAM LISTENING 1926205077 21792/mysqld /var/run/mysqld/mysqld.sock Toy Connection Class root@88:~# cat TestConnect/TestConnection.java import java.sql.Connection; import java.sql.DriverManager; import java.sql.SQLException; public class TestConnection { public static void main(String args[]) throws Exception { Connection con = null; try { Class.forName("com.mysql.jdbc.Driver").newInstance(); System.out.println("Got driver"); con = DriverManager.getConnection( "jdbc:mysql:///localhost:3306", "uname", "pass"); System.out.println("Got connection"); if(!con.isClosed()) System.out.println("Successfully connected to " + "MySQL server using TCP/IP..."); } finally { if(con != null) con.close(); } } } Toy Connection Class Output Note: This is the same error I get from Tomcat. root@88:~/TestConnect# java -cp mysql-connector-java-5.1.12-bin.jar:. TestConnection Got driver Exception in thread "main" com.mysql.jdbc.exceptions.jdbc4.CommunicationsException: Communications link failure The last packet sent successfully to the server was 1 milliseconds ago. The driver has not received any packets from the server. at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method) at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39) at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27) at java.lang.reflect.Constructor.newInstance(Constructor.java:513) at com.mysql.jdbc.Util.handleNewInstance(Util.java:409) at com.mysql.jdbc.SQLError.createCommunicationsException(SQLError.java:1122) at TestConnection.main(TestConnection.java:14) Caused by: com.mysql.jdbc.exceptions.jdbc4.CommunicationsException: Communications link failure The last packet sent successfully to the server was 0 milliseconds ago. The driver has not received any packets from the server. at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method) at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39) at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27) at java.lang.reflect.Constructor.newInstance(Constructor.java:513) at com.mysql.jdbc.Util.handleNewInstance(Util.java:409) at com.mysql.jdbc.SQLError.createCommunicationsException(SQLError.java:1122) at com.mysql.jdbc.MysqlIO.<init>(MysqlIO.java:344) at com.mysql.jdbc.ConnectionImpl.createNewIO(ConnectionImpl.java:2181) ... 12 more Caused by: java.net.ConnectException: Connection timed out at java.net.PlainSocketImpl.socketConnect(Native Method) ... 13 more Telnet Output root@88:~/TestConnect# telnet localhost 3306 Trying 127.0.0.1... telnet: Unable to connect to remote host: Connection timed out

  Read the article

• Changing User/Group to allow PHP to chmod/rename and move_upload_file()

  - by moe

  It seems like I cannot do anything with my PHP script on my VPS. It returns 'Permission denied' when I try to upload something to a directory. Yes, I have changed the permission to 777, and it works, but I do not like the insecurity When running the command: ps axu|grep apache|grep -v grep It returns nobody 7689 0.1 3.8 50604 20036 ? S 21:38 0:00 /usr/local/apache/bin/httpd -k start -DSSL root 13600 0.0 3.8 50304 20348 ? Ss Jun06 0:46 /usr/local/apache/bin/httpd -k start -DSSL nobody 15733 0.1 3.8 50700 20156 ? S 21:39 0:00 /usr/local/apache/bin/httpd -k start -DSSL nobody 15818 0.1 3.8 51492 20180 ? S 21:39 0:00 /usr/local/apache/bin/httpd -k start -DSSL nobody 23843 0.1 3.7 51336 19592 ? S 21:40 0:00 /usr/local/apache/bin/httpd -k start -DSSL nobody 30335 0.0 3.5 50436 18496 ? S 21:41 0:00 /usr/local/apache/bin/httpd -k start -DSSL nobody 30406 0.0 3.5 50444 18544 ? S 21:41 0:00 /usr/local/apache/bin/httpd -k start -DSSL nobody 30407 0.0 3.5 50556 18696 ? S 21:41 0:00 /usr/local/apache/bin/httpd -k start -DSSL nobody 30472 0.0 3.6 50828 19348 ? S 21:41 0:00 /usr/local/apache/bin/httpd -k start -DSSL nobody 30474 0.0 3.5 50668 18868 ? S 21:41 0:00 /usr/local/apache/bin/httpd -k start -DSSL nobody 30476 0.0 3.6 50532 19064 ? S 21:41 0:00 /usr/local/apache/bin/httpd -k start -DSSL nobody 30501 0.0 3.8 50556 20080 ? S 21:36 0:00 /usr/local/apache/bin/httpd -k start -DSSL nobody 32341 0.0 3.5 50444 18492 ? S 21:41 0:00 /usr/local/apache/bin/httpd -k start -DSSL nobody 32370 0.0 3.5 50444 18476 ? S 21:42 0:00 /usr/local/apache/bin/httpd -k start -DSSL nobody 32414 0.1 3.7 51336 19524 ? S 21:42 0:00 /usr/local/apache/bin/httpd -k start -DSSL nobody 32416 0.1 3.5 50668 18816 ? S 21:42 0:00 /usr/local/apache/bin/httpd -k start -DSSL nobody 32457 0.1 3.6 50828 19320 ? S 21:42 0:00 /usr/local/apache/bin/httpd -k start -DSSL nobody 32458 0.1 3.6 50772 19276 ? S 21:42 0:00 /usr/local/apache/bin/httpd -k start -DSSL nobody 32459 0.0 3.5 50444 18504 ? S 21:42 0:00 /usr/local/apache/bin/httpd -k start -DSSL nobody 32460 0.2 3.6 50828 19320 ? S 21:42 0:00 /usr/local/apache/bin/httpd -k start -DSSL nobody 32463 0.0 3.5 50444 18472 ? S 21:42 0:00 /usr/local/apache/bin/httpd -k start -DSSL nobody 32466 0.0 3.4 50436 17960 ? S 21:42 0:00 /usr/local/apache/bin/httpd -k start -DSSL The owner of the directory is 'user [505]' and the group is 'user[508]' (as seen in WinSCP) What can I do to change the Apache Handler to the right owner and group to allow my PHP scripts to work? P.S My PHP is not set to safe mode, and the open_basedir is set to no value EDIT: This is what my httpd.conf looks like (for the associative domain) <VirtualHost *:80> ServerName domain.com ServerAlias www.domain.com DocumentRoot /home/domain/public_html ServerAdmin info@domain ## User <theUsername> # Needed for Cpanel::ApacheConf <IfModule mod_userdir.c> Userdir disabled Userdir enabled <userName> </IfModule> <IfModule mod_suphp.c> suPHP_UserGroup <userName> <userName> </IfModule> <IfModule !mod_disable_suexec.c> SuexecUserGroup <userName> <userName> </IfModule> CustomLog /usr/local/apache/domlogs/domain.com-bytes_log "%{%s}t %I .\n%{%s}t %O ." CustomLog /usr/local/apache/domlogs/domain.com combined ScriptAlias /cgi-bin/ /home/domain/public_html/cgi-bin/ #Options -ExecCGI -Includes #RemoveHandler cgi-script .cgi .pl .plx .ppl .perl

  Read the article

• Set up lnux box for hosting a-z

  - by microchasm

  I am in the process of reinstalling the OS on a machine that will be used to host a couple of apps for our business. The apps will be local only; access from external clients will be via vpn only. The prior setup used a hosting control panel (Plesk) for most of the admin, and I was looking at using another similar piece of software for the reinstall - but I figured I should finally learn how it all works. I can do most of the things the software would do for me, but am unclear on the symbiosis of it all. This is all an attempt to further distance myself from the land of Configuration Programmer/Programmer, if at all possible. I can't find a full walkthrough anywhere for what I'm looking for, so I thought I'd put up this question, and if people can help me on the way I will edit this with the answers, and document my progress/pitfalls. Hopefully someday this will help someone down the line. The details: CentOS 5.5 x86_64 httpd: Apache/2.2.3 mysql: 5.0.77 (to be upgraded) php: 5.1 (to be upgraded) The requirements: SECURITY!! Secure file transfer Secure client access (SSL Certs and CA) Secure data storage Virtualhosts/multiple subdomains Local email would be nice, but not critical The Steps: Download latest CentOS DVD-iso (torrent worked great for me). Install CentOS: While going through the install, I checked the Server Components option thinking I was going to be using another Plesk-like admin. In hindsight, considering I've decided to try to go my own way, this probably wasn't the best idea. Basic config: Setup users, networking/ip address etc. Yum update/upgrade. Upgrade PHP: To upgrade PHP to the latest version, I had to look to another repo outside CentOS. IUS looks great and I'm happy I found it! cd /tmp #wget http://dl.iuscommunity.org/pub/ius/stable/Redhat/5/x86_64/epel-release-1-1.ius.el5.noarch.rpm #rpm -Uvh epel-release-1-1.ius.el5.noarch.rpm #wget http://dl.iuscommunity.org/pub/ius/stable/Redhat/5/x86_64/ius-release-1-4.ius.el5.noarch.rpm #rpm -Uvh ius-release-1-4.ius.el5.noarch.rpm yum list | grep -w \.ius\. [will list all packages available in the IUS repo] rpm -qa | grep php [will list installed packages needed to be removed. the installed packages need to be removed before you can install the IUS packages otherwise there will be conflicts] #yum shell >remove php-gd php-cli php-odbc php-mbstring php-pdo php php-xml php-common php-ldap php-mysql php-imap Setting up Remove Process >install php53 php53-mcrypt php53-mysql php53-cli php53-common php53-ldap php53-imap php53-devel >transaction solve >transaction run Leaving Shell #php -v PHP 5.3.2 (cli) (built: Apr 6 2010 18:13:45) This process removes the old version of PHP and installs the latest. To upgrade mysql: Pretty much the same process as above with PHP #/etc/init.d/mysqld stop [OK] rpm -qa | grep mysql [installed mysql packages] #yum shell >remove mysql mysql-server Setting up Remove Process >install mysql51 mysql51-server mysql51-devel >transaction solve >transaction run Leaving Shell #service mysqld start [OK] #mysql -v Server version: 5.1.42-ius Distributed by The IUS Community Project The above upgrade instructions courtesy of IUS wiki: http://wiki.iuscommunity.org/Doc/ClientUsageGuide Create a chroot jail to hold sftp user via rssh. This will force SCP/SFTP and will circumvent traditional FTP server setup. #cd /tmp #wget http://dag.wieers.com/rpm/packages/rssh/rssh-2.3.2-1.2.el5.rf.x86_64.rpm #rpm -ivh rssh-2.3.2-1.2.el5.rf.x86_64.rpm #useradd -m -d /home/dev -s /usr/bin/rssh dev #passwd dev Edit /etc/rssh.conf to grant access to SFTP to rssh users. #vi /etc/rssh.conf Uncomment line allowscp This allows me to connect to the machine via SFTP protocol in Transmit (my FTP program of choice; I'm sure it's similar with other FTP apps). Above instructions for SFTP appropriated (with appreciation!) from http://www.cyberciti.biz/tips/linux-unix-restrict-shell-access-with-rssh.html And this is where I'm at. I will keep editing this as I make progress. Any tips on how to Configure virtual interfaces/ip based virtual hosts for SSL, setting up a CA, or anything else would be appreciated.

  Read the article

• Unable to remove limit on memory usage for PHP script.

  - by Jess Telford

  The Situation I am having an issue with a PHP script getting the following error message: Fatal error: Out of memory (allocated 359923712) (tried to allocate 72 bytes) in /path/to/piwik/core/DataTable.php on line 969 The script I'm running is: /path/to/piwik/misc/cron/archive.sh I am assuming the numbers are Bytes, which means that total is approximately 360MB. For all intents and purposes, I have increased the memory limits on the server well above 360MB, yet this is the number (give or take a byte) it consistently errors out at. Please note: This question is not about fixing a memory leak in the script, nor about why the script itself is using so much memory. The script is part of the Piwik archiving process, so I cannot just fix any memory leaks, etc. For more info on this script and why I am increasing the memory limit, see "How to setup auto archiving" The question Given that the script is attempting to use over 360MB of memory, which I cannot change, why does it not seem possible for me to increase the amount of memory available to php on my server? What I've tried Increasing PHP's memory_limit Given the php.ini file: php -i | grep php.ini Configuration File (php.ini) Path => /usr/local/lib Loaded Configuration File => /usr/local/lib/php.ini I have edited that file, so the memory_limit directive reads; memory_limit = -1 Restart Apache, and check the new value has stuck; $ php -i | grep memory_limit memory_limit => -1 => -1 Run the script, and get the same error. I've also tried 1G, 768M, etc, all to the same result (ie; no change). Update 22nd June: Based on Vangel's help, I have attempted to set post_max_size to 20M in combination with setting memory_limit. Again, this has no effect. Removing the memory limit on child processes of Apache I have found and edited the httpd.conf file to make sure there is no RLimitMEM directive. I then used WHM's Apache Configuration Memory Usage Restrictions to generate a restriction, which it claimed was at 1000M (and confirmed by checking httpd.conf). Both of these resulted in no change to the script erroring at 360MB. Increasing the per process memory limits of Linux The current limits set on the system: $ ulimit -m 524288 $ ulimit -v 524288 I have attempted to set both of these to unlimited: $ ulimit -m unlimited $ ulimit -v unlimited $ ulimit -m unlimited $ ulimit -v unlimited Once again, this has resulted in absolutely no improvement in my problem. My setup $ cat /etc/redhat-release CentOS release 5.5 (Final) $ uname -a Linux example.com 2.6.18-164.15.1.el5 #1 SMP Wed Mar 17 11:30:06 EDT 2010 x86_64 x86_64 x86_64 GNU/Linux $ php -i | grep "PHP Version" PHP Version => 5.2.9 $ httpd -V Server version: Apache/2.0.63 Server built: Feb 2 2011 01:25:12 Cpanel::Easy::Apache v3.2.0 rev5291 Server's Module Magic Number: 20020903:13 Server loaded: APR 0.9.17, APR-UTIL 0.9.15 Compiled using: APR 0.9.17, APR-UTIL 0.9.15 Architecture: 64-bit Server compiled with.... -D APACHE_MPM_DIR="server/mpm/prefork" -D APR_HAS_SENDFILE -D APR_HAS_MMAP -D APR_HAVE_IPV6 (IPv4-mapped addresses enabled) -D APR_USE_SYSVSEM_SERIALIZE -D APR_USE_PTHREAD_SERIALIZE -D SINGLE_LISTEN_UNSERIALIZED_ACCEPT -D APR_HAS_OTHER_CHILD -D AP_HAVE_RELIABLE_PIPED_LOGS -D HTTPD_ROOT="/usr/local/apache" -D SUEXEC_BIN="/usr/local/apache/bin/suexec" -D DEFAULT_PIDLOG="logs/httpd.pid" -D DEFAULT_SCOREBOARD="logs/apache_runtime_status" -D DEFAULT_LOCKFILE="logs/accept.lock" -D DEFAULT_ERRORLOG="logs/error_log" -D AP_TYPES_CONFIG_FILE="conf/mime.types" -D SERVER_CONFIG_FILE="conf/httpd.conf" Output of $ php -i: http://pastebin.com/EiRut6Nm

  Read the article

• arp -n responds with (incomplete) on the wrong subnet, can't remove it

  - by Hannes

  context There are 2 servers: server1 - eth0 10.129.76.16 eth0.2 192.168.0.103 server2 - eth0 10.129.79.1 eth0.2 192.168.62.101 The 192.x.x.x addresses are connected to the same vlan (vlan2) and are able to see eachother. The 10.x.x.x addresses are connected to different vlan's which are not able to see eachother. on request of David Swartz: the routing table on server 1 is: ~$ sudo route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 10.129.76.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 192.168.0.0 0.0.0.0 255.255.192.0 U 0 0 0 eth0.2 0.0.0.0 192.168.61.254 0.0.0.0 UG 100 0 0 eth0.2 the routing table on server 2 is: ~$ sudo route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 <public IP gw> 0.0.0.0 UG 100 0 0 eth0.11 10.129.79.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 <public IP> 0.0.0.0 255.255.255.128 U 0 0 0 eth0.11 192.168.0.0 0.0.0.0 255.255.192.0 U 0 0 0 eth0.2 Problem: When I ping from server 1 to server 2, it seems no packets are arriving and vice versa. When I check the routes (route -n) I see the default gw uses eth0.2 on both servers. But when I use arping, I get a response one way (from server 2 to server 1) but no response vice versa. arping 192.168.62.101 ARPING 192.168.62.101 from 10.129.76.16 eth0 ^CSent 2 probes (2 broadcast(s)) Received 0 response(s) As you can see it uses the 10.x.x.x address instead of the 192.x.x.x. And as I told before, the 10.x.x.x address is unreachable from the other server. When I force arping to use eth0.2, it does work. I don't have any problems with ping'ing other servers from any of those 2 servers. I did see this in the arp tables: ~# arp -n | grep 192.168.0.103 192.168.0.103 (incomplete) eth0 and ~# arp -n | grep 192.168.62.101 Question quite obvious... How can I make these servers see each other again? Things I've tied clear the apropriate entries in the arptable and tried to get rid of the (incomplete) But I think the biggest problem is that eth0 is used instead of eth0.2 for the packets from server 1 to server 2 Because of David Swartz' remark about the routing tables, I added a route in there defining the host. I added 192.168.0.103 0.0.0.0 255.255.255.255 UH 0 0 0 eth0.2 and 192.168.62.101 0.0.0.0 255.255.255.255 UH 0 0 0 eth0.2 to the appropriate servers but this didn't solve the problem so I presume the problem is not in the routing. My guess I guess the problem lies in the following. ~$ arp -n | grep 192.168.0.103 192.168.0.103 (incomplete) eth0 but I'm unable to remove this entry. (arp -d 192.168.0.103 has no effect) Thanks for reading and even more thanks for answering!

  Read the article

• Error on installing SVN extension with pecl

  - by thedp

  Hello, I'm trying to install the following PHP extension: http://php.net/manual/en/book.svn.php But when I do pecl install svn-beta I receive an error message that it can't locate the svn_client.h file. I searched the net but couldn't find any useful reference to this error. Thank you for your help. Installation result: root@myUbuntu:/home/thedp# pecl install svn-beta downloading svn-0.5.1.tgz ... Starting to download svn-0.5.1.tgz (23,563 bytes) .....done: 23,563 bytes 4 source files, building running: phpize Configuring for: PHP Api Version: 20041225 Zend Module Api No: 20060613 Zend Extension Api No: 220060519 1. Please provide the prefix of Subversion installation : autodetect 1-1, 'all', 'abort', or Enter to continue: 1. Please provide the prefix of the APR installation used with Subversion : autodetect 1-1, 'all', 'abort', or Enter to continue: building in /var/tmp/pear-build-root/svn-0.5.1 running: /tmp/pear/temp/svn/configure --with-svn --with-svn-apr checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for a sed that does not truncate output... /bin/sed checking for gcc... gcc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc and cc understand -c and -o together... yes checking for system library directory... lib checking if compiler supports -R... no checking if compiler supports -Wl,-rpath,... yes checking build system type... i686-pc-linux-gnu checking host system type... i686-pc-linux-gnu checking target system type... i686-pc-linux-gnu checking for PHP prefix... /usr checking for PHP includes... -I/usr/include/php5 -I/usr/include/php5/main -I/usr/include/php5/TSRM -I/usr/include/php5/Zend -I/usr/include/php5/ext -I/usr/include/php5/ext/date/lib -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 checking for PHP extension directory... /usr/lib/php5/20060613+lfs checking for PHP installed headers prefix... /usr/include/php5 checking for re2c... no configure: WARNING: You will need re2c 0.12.0 or later if you want to regenerate PHP parsers. checking for gawk... no checking for nawk... nawk checking if nawk is broken... no checking for svn support... yes, shared checking for specifying the location of apr for svn... yes, shared checking for svn includes... configure: error: failed to find svn_client.h ERROR: `/tmp/pear/temp/svn/configure --with-svn --with-svn-apr' failed

  Read the article

• Samba with Active Directory - shares are readonly, NT_STATUS_MEDIA_WRITE_PROTECTED

  - by froh42

  I've set a samba server that seems to work, all shares are seemingly exported as readonly, however. The machine is called "lx". When I'm on lx I can run the following command: froh@lx:~$ smbclient //lx/export -UAdministrator Enter Administrator's password: Domain=[CUSTOMER] OS=[Unix] Server=[Samba 3.5.4] smb: \> mkdir wrzlbrmpf NT_STATUS_MEDIA_WRITE_PROTECTED making remote directory \wrzlbrmpf smb: \> ls . D 0 Fri Dec 3 19:04:20 2010 .. D 0 Sun Nov 28 01:32:37 2010 zork D 0 Fri Dec 3 18:53:33 2010 bar D 0 Sun Nov 28 23:52:43 2010 ork 1 Fri Dec 3 18:53:02 2010 foo 1 Sun Nov 28 23:52:41 2010 gaga D 0 Fri Dec 3 19:04:20 2010 How can I troubleshoot this? What I did: First I set up a fresh install of Ubuntu 10.10 x64. Second I got kerberos working with the following krb5.conf file: [libdefaults] ticket_lifetime = 24000 clock_skew = 300 default_realm = CUSTOMER.LOCAL [realms] CUSTOMER.LOCAL = { kdc = SB4.customer.local:88 admin_server = SB4.customer.local:464 default_domain = CUSTOMER.LOCAL } [domain_realm] .customer.local = CUSTOMER.LOCAL customer.local = CUSTOMER.LOCAL #[login] # krb4_convert = true # krb4_get_tickets = false I also added winbind to group, passwd and shadow in nsswitch.conf. Seemingly Kerberos works: root@lx:~# net ads testjoin Join is OK root@lx:~# wbinfo -a 'Administrator%MYSECRETPASSWORD' plaintext password authentication succeeded challenge/response password authentication succeeded wbinfo -u and wbinfo -g also spit out a list of users and a list of groups respectiveley. I noted that domain accounts did NOT include a domain and they are in german (as on the SBS 2003 that is the domain server). So I get a "Domänenbenutzer" in wbinfo -u's output not a "CUSTOMER+Domain User" or something similar. I'm not sure anymore what I did to the PAM configuration, but here is what I currently have: root@lx:/etc/pam.d# cat samba @include common-auth @include common-account @include common-session-noninteractive root@lx:/etc/pam.d# grep -ve '^#' common-auth auth [success=3 default=ignore] pam_krb5.so minimum_uid=1000 auth [success=2 default=ignore] pam_unix.so nullok_secure try_first_pass auth [success=1 default=ignore] pam_winbind.so krb5_auth krb5_ccache_type=FILE cached_login try_first_pass auth requisite pam_deny.so auth required pam_permit.so root@lx:/etc/pam.d# grep -ve '^#' common-account account [success=2 new_authtok_reqd=done default=ignore] pam_unix.so account [success=1 new_authtok_reqd=done default=ignore] pam_winbind.so account requisite pam_deny.so account required pam_permit.so account required pam_krb5.so minimum_uid=1000 root@lx:/etc/pam.d# grep -ve '^#' common-session-noninteractive session [default=1] pam_permit.so session requisite pam_deny.so session required pam_permit.so session optional pam_krb5.so minimum_uid=1000 session required pam_unix.so session optional pam_winbind.so At some point I joined the linux box into the AD domain. After (manually) creating a home directory on the linux box I can log in using the Adminstrator user with the password taken from AD. Now I run samba with the following setup: [global] netbios name = LX realm = CUSTOMER.LOCAL workgroup = CUSTOMER security = ADS encrypt passwords = yes password server = 192.168.20.244 #IP des Domain Controllers os level = 0 socket options = TCP_NODELAY SO_RCVBUF=16384 SO_SNDBUF=16384 idmap uid = 10000-20000 idmap gid = 10000-20000 winbind enum users = Yes winbind enum groups = Yes preferred master = no winbind separator = + dns proxy = no wins proxy = no # client NTLMv2 auth = Yes log level = 2 logfile = /var/log/samba/log.smbd.%U template homedir = /home/%U template shell = /bin/bash [export] path = /mnt/sdc1/export read only = No public = Yes Currently I don't care whether export is exported to everyone or just one user, I want to see somebody WRITING to that directory before I start fiddling with the authentication settings. (Who may access it). As mentioned, accessing the share from smbclient results in this NT_STATUS_MEDIA_WRITE_PROTECTED . Accessing it from windows shows ACLs that look correct (The user may write) - but it does not work, I can only read files not write. The directory to be exported looks like this: root@lx:/etc/pam.d# ls -ld /mnt/ drwxr-xr-x 5 root root 4096 2010-11-28 01:29 /mnt/ root@lx:/etc/pam.d# ls -ld /mnt/sdc1/ drwxr-xr-x 4 froh froh 4096 2010-11-28 01:32 /mnt/sdc1/ root@lx:/etc/pam.d# ls -ld /mnt/sdc1/export/ drwxrwxrwx+ 5 administrator domänen-admins 4096 2010-12-03 19:04 /mnt/sdc1/export/ root@lx:/etc/pam.d# getfacl /mnt/ getfacl: Entferne führende '/' von absoluten Pfadnamen # file: mnt/ # owner: root # group: root user::rwx group::r-x other::r-x root@lx:/etc/pam.d# getfacl /mnt/sdc1/ getfacl: Entferne führende '/' von absoluten Pfadnamen # file: mnt/sdc1/ # owner: froh # group: froh user::rwx group::r-x other::r-x root@lx:/etc/pam.d# getfacl /mnt/sdc1/export/ getfacl: Entferne führende '/' von absoluten Pfadnamen # file: mnt/sdc1/export/ # owner: administrator # group: domänen-admins user::rwx group::rwx group:domänen-admins:rwx mask::rwx other::rwx default:user::rwx default:group::rwx default:group:domänen-admins:rwx default:mask::rwx default:other::rwx My, oh my what am I overlooking? What am I to blind to see?

  Read the article

• Samba with Active Directory - shares are readonly, NT_STATUS_MEDIA_WRITE_PROTECTED

  - by froh42

  I've set a samba server that seems to work, all shares are seemingly exported as readonly, however. The machine is called "lx". When I'm on lx I can run the following command: froh@lx:~$ smbclient //lx/export -UAdministrator Enter Administrator's password: Domain=[CUSTOMER] OS=[Unix] Server=[Samba 3.5.4] smb: \> mkdir wrzlbrmpf NT_STATUS_MEDIA_WRITE_PROTECTED making remote directory \wrzlbrmpf smb: \> ls . D 0 Fri Dec 3 19:04:20 2010 .. D 0 Sun Nov 28 01:32:37 2010 zork D 0 Fri Dec 3 18:53:33 2010 bar D 0 Sun Nov 28 23:52:43 2010 ork 1 Fri Dec 3 18:53:02 2010 foo 1 Sun Nov 28 23:52:41 2010 gaga D 0 Fri Dec 3 19:04:20 2010 How can I troubleshoot this? What I did: First I set up a fresh install of Ubuntu 10.10 x64. Second I got kerberos working with the following krb5.conf file: [libdefaults] ticket_lifetime = 24000 clock_skew = 300 default_realm = CUSTOMER.LOCAL [realms] CUSTOMER.LOCAL = { kdc = SB4.customer.local:88 admin_server = SB4.customer.local:464 default_domain = CUSTOMER.LOCAL } [domain_realm] .customer.local = CUSTOMER.LOCAL customer.local = CUSTOMER.LOCAL #[login] # krb4_convert = true # krb4_get_tickets = false I also added winbind to group, passwd and shadow in nsswitch.conf. Seemingly Kerberos works: root@lx:~# net ads testjoin Join is OK root@lx:~# wbinfo -a 'Administrator%MYSECRETPASSWORD' plaintext password authentication succeeded challenge/response password authentication succeeded wbinfo -u and wbinfo -g also spit out a list of users and a list of groups respectiveley. I noted that domain accounts did NOT include a domain and they are in german (as on the SBS 2003 that is the domain server). So I get a "Domänenbenutzer" in wbinfo -u's output not a "CUSTOMER+Domain User" or something similar. I'm not sure anymore what I did to the PAM configuration, but here is what I currently have: root@lx:/etc/pam.d# cat samba @include common-auth @include common-account @include common-session-noninteractive root@lx:/etc/pam.d# grep -ve '^#' common-auth auth [success=3 default=ignore] pam_krb5.so minimum_uid=1000 auth [success=2 default=ignore] pam_unix.so nullok_secure try_first_pass auth [success=1 default=ignore] pam_winbind.so krb5_auth krb5_ccache_type=FILE cached_login try_first_pass auth requisite pam_deny.so auth required pam_permit.so root@lx:/etc/pam.d# grep -ve '^#' common-account account [success=2 new_authtok_reqd=done default=ignore] pam_unix.so account [success=1 new_authtok_reqd=done default=ignore] pam_winbind.so account requisite pam_deny.so account required pam_permit.so account required pam_krb5.so minimum_uid=1000 root@lx:/etc/pam.d# grep -ve '^#' common-session-noninteractive session [default=1] pam_permit.so session requisite pam_deny.so session required pam_permit.so session optional pam_krb5.so minimum_uid=1000 session required pam_unix.so session optional pam_winbind.so At some point I joined the linux box into the AD domain. After (manually) creating a home directory on the linux box I can log in using the Adminstrator user with the password taken from AD. Now I run samba with the following setup: [global] netbios name = LX realm = CUSTOMER.LOCAL workgroup = CUSTOMER security = ADS encrypt passwords = yes password server = 192.168.20.244 #IP des Domain Controllers os level = 0 socket options = TCP_NODELAY SO_RCVBUF=16384 SO_SNDBUF=16384 idmap uid = 10000-20000 idmap gid = 10000-20000 winbind enum users = Yes winbind enum groups = Yes preferred master = no winbind separator = + dns proxy = no wins proxy = no # client NTLMv2 auth = Yes log level = 2 logfile = /var/log/samba/log.smbd.%U template homedir = /home/%U template shell = /bin/bash [export] path = /mnt/sdc1/export read only = No public = Yes Currently I don't care whether export is exported to everyone or just one user, I want to see somebody WRITING to that directory before I start fiddling with the authentication settings. (Who may access it). As mentioned, accessing the share from smbclient results in this NT_STATUS_MEDIA_WRITE_PROTECTED . Accessing it from windows shows ACLs that look correct (The user may write) - but it does not work, I can only read files not write. The directory to be exported looks like this: root@lx:/etc/pam.d# ls -ld /mnt/ drwxr-xr-x 5 root root 4096 2010-11-28 01:29 /mnt/ root@lx:/etc/pam.d# ls -ld /mnt/sdc1/ drwxr-xr-x 4 froh froh 4096 2010-11-28 01:32 /mnt/sdc1/ root@lx:/etc/pam.d# ls -ld /mnt/sdc1/export/ drwxrwxrwx+ 5 administrator domänen-admins 4096 2010-12-03 19:04 /mnt/sdc1/export/ root@lx:/etc/pam.d# getfacl /mnt/ getfacl: Entferne führende '/' von absoluten Pfadnamen # file: mnt/ # owner: root # group: root user::rwx group::r-x other::r-x root@lx:/etc/pam.d# getfacl /mnt/sdc1/ getfacl: Entferne führende '/' von absoluten Pfadnamen # file: mnt/sdc1/ # owner: froh # group: froh user::rwx group::r-x other::r-x root@lx:/etc/pam.d# getfacl /mnt/sdc1/export/ getfacl: Entferne führende '/' von absoluten Pfadnamen # file: mnt/sdc1/export/ # owner: administrator # group: domänen-admins user::rwx group::rwx group:domänen-admins:rwx mask::rwx other::rwx default:user::rwx default:group::rwx default:group:domänen-admins:rwx default:mask::rwx default:other::rwx My, oh my what am I overlooking? What am I to blind to see?

  Read the article

• Set up lnux box for hosting a-z [apache mysql php ssl]

  - by microchasm

  I am in the process of reinstalling the OS on a machine that will be used to host a couple of apps for our business. The apps will be local only; access from external clients will be via vpn only. The prior setup used a hosting control panel (Plesk) for most of the admin, and I was looking at using another similar piece of software for the reinstall - but I figured I should finally learn how it all works. I can do most of the things the software would do for me, but am unclear on the symbiosis of it all. This is all an attempt to further distance myself from the land of Configuration Programmer/Programmer, if at all possible. I can't find a full walkthrough anywhere for what I'm looking for, so I thought I'd put up this question, and if people can help me on the way I will edit this with the answers, and document my progress/pitfalls. Hopefully someday this will help someone down the line. The details: CentOS 5.5 x86_64 httpd: Apache/2.2.3 mysql: 5.0.77 (to be upgraded) php: 5.1 (to be upgraded) The requirements: SECURITY!! Secure file transfer Secure client access (SSL Certs and CA) Secure data storage Virtualhosts/multiple subdomains Local email would be nice, but not critical The Steps: Download latest CentOS DVD-iso (torrent worked great for me). Install CentOS: While going through the install, I checked the Server Components option thinking I was going to be using another Plesk-like admin. In hindsight, considering I've decided to try to go my own way, this probably wasn't the best idea. Basic config: Setup users, networking/ip address etc. Yum update/upgrade. Upgrade PHP: To upgrade PHP to the latest version, I had to look to another repo outside CentOS. IUS looks great and I'm happy I found it! cd /tmp #wget http://dl.iuscommunity.org/pub/ius/stable/Redhat/5/x86_64/epel-release-1-1.ius.el5.noarch.rpm #rpm -Uvh epel-release-1-1.ius.el5.noarch.rpm #wget http://dl.iuscommunity.org/pub/ius/stable/Redhat/5/x86_64/ius-release-1-4.ius.el5.noarch.rpm #rpm -Uvh ius-release-1-4.ius.el5.noarch.rpm yum list | grep -w \.ius\. [will list all packages available in the IUS repo] rpm -qa | grep php [will list installed packages needed to be removed. the installed packages need to be removed before you can install the IUS packages otherwise there will be conflicts] #yum shell >remove php-gd php-cli php-odbc php-mbstring php-pdo php php-xml php-common php-ldap php-mysql php-imap Setting up Remove Process >install php53 php53-mcrypt php53-mysql php53-cli php53-common php53-ldap php53-imap php53-devel >transaction solve >transaction run Leaving Shell #php -v PHP 5.3.2 (cli) (built: Apr 6 2010 18:13:45) This process removes the old version of PHP and installs the latest. To upgrade mysql: Pretty much the same process as above with PHP #/etc/init.d/mysqld stop [OK] rpm -qa | grep mysql [installed mysql packages] #yum shell >remove mysql mysql-server Setting up Remove Process >install mysql51 mysql51-server mysql51-devel >transaction solve >transaction run Leaving Shell #service mysqld start [OK] #mysql -v Server version: 5.1.42-ius Distributed by The IUS Community Project And this is where I'm at. I will keep editing this as I make progress. Any tips on how to Configure Virtualhosts for SSL, setting up a CA, setting up SFTP with openSSH, or anything else would be appreciated.

  Read the article

• On configuring GC 10.2.0.5 to monitor LISTENER SCAN using UDMs ...

  - by [email protected]

  Hi,Looks like Grid Control 10.2.0.5 is not fully prepared for monitoringthe Grid Infrastructure (11gR2).Even I'm pretty sure the upcoming version of GC (11g) will of course support all the new features of 11gR2, some customersare asking for some "hand-made" procedures for monitoring all the new stuff.I think one of the most critical components that cant be monitored are the LISTENER SCAN, so I have developed a little script for doing sousing the GC User Defined Metrics ( at host level )I am more than happy to share with you:#!/bin/ksh   ###    NAME###     monitor_scan.sh######    DESCRIPTION###      SCAN Listener monitoring######    RETURNS######    NOTES######    MODIFIED           (DD/MM/YY)###      Oracle            25/03/10     - Creation###export ORACLE_HOME=/opt/oracle/soft/11.2/gridRSC_KEY=$1AWK=/sbin/awk   LISTENER_DOWN_COUNT=$(${ORACLE_HOME}/bin/crsctl status resource -w 'TYPE = ora.scan_listener.type' | grep OFFLINE | wc -l)if [ ${LISTENER_DOWN_COUNT} != 0 ]; then  SCAN_DOWN_LIST=$(${ORACLE_HOME}/bin/crsctl status resource  -w 'TYPE = ora.scan_listener.type' | $AWK \ 'BEGIN { FS="="; state = 0; }  $1~/NAME/ && $2~/'$RSC_KEY'/ {appname = $2; state=1};  state == 0 {next;}  $1~/TARGET/ && state == 1 {apptarget = $2; state=2;}  $1~/STATE/ && state == 2 {appstate = $2; state=3;}  state == 3 {printf "%-45s %-10s %-18s\n", appname, apptarget, appstate; state=0;}' | grep OFFLINE | awk '{ print $1 }')  echo em_result=ALERT  echo em_message=There are LISTENER SCAN with down status: [${SCAN_DOWN_LIST}]else  echo em_result=NORMAL  echo em_message=All SCAN Listener are UPfiHope it helpsL

  Read the article

• find . -type l says missing argument

  - by Sebi

  I want to find all symbolic links in the current directory and below. Therefore, I used: find . -type l Running that clears the screen showing "Pattern not found (press RETURN)" at the bottom of the screen. After pressing return, I get: find: missing argument to `-type' Here some system details: Ubuntu 10.04 LTS 64Bit zsh 4.3.10 (x86_64-unknown-linux-gnu) happens also in Screen version 4.00.03jw4 (FAU) 2-May-06 find (GNU findutils) 4.4.2 So how do I search for symbolic links so that I can grep in their names?

  Read the article

• MacBook Pro 8.2 wifi keeps disconnecting, Ubuntu 12.04

  - by Sean Isley

  I am using a MacBook Pro 8.2 with Ubuntu 12.04, and my wifi disconnects consistently. I followed the directions as detailed here here, however, and it works up to expected speeds, but after within an hours time, the wifi disconnects and the only way to solve the issue is to either reboot OR disable wireless and re-enable it. lsmod | grep cfg80211 outputs: cfg80211 178818 2 b43,mac80211 I suspect that I did not blacklist the correct driver and there are two drivers causing instability, however I have no idea if I actually did it correctly.

  Read the article

• LightDM will not start after stopping it

  - by Sweeters

  I am running Ubuntu 11.10 "Oneiric Ocelot", and in trying to install the nvidia CUDA developer drivers I switched to a virtual terminal (Ctrl-Alt-F5) and stopped lightdm (installation required that no X server instance be running) through sudo service lightdm stop. Re-starting lightdm with sudo service lightdm start did not work: A couple of * Starting [...] lines where displayed, but the process hanged. (I do not remember at which point, but I think it was * Starting System V runlevel compatibility. I manually rebooted my laptop, and ever since booting seems to hang, usually around the * Starting anac(h)ronistic cron [OK] log line (not consistently at that point, though). From that point on, I seem to be able to interact with my system only through a tty session (Ctrl-Alt-F1). I've tried purging and reinstalling both lightdm and gdm, as well as selecting both as the default display managers (through sudo dpkg-reconfigure [lightdm / gdm] or by manually editing /etc/X11/default-display-manager) through both apt-get and aptitude (that shouldn't make a difference anyway) after updating the packages, but the problem persists. Some of the responses I'm getting are the following: After running sudo dpkg-reconfigure lightdm (but not ... gdm) I get the following message: dpkg-maintscript-helper:warning: environment variable DPKG_MATINSCRIPT_NAME missing dpkg-maintscript-helper:warning: environment variable DPKG_MATINSCRIPT_PACKAGE missing After trying sudo service lightdm start or sudo start lightdm I get to see the boot loading screen again but nothing changes. If I go back to the tty shell I see lightdm start/running, process <num> but ps -e | grep lightdm gives no output. After trying sudo service gdm start or sudo starg gdm I get the gdm start/running, process <num> message, and gdm-binary is supposedly an active process, but all that happens is that the screen blinks a couple of times and nothing else. Other candidate solutions that I'd found on the web included running startx but when I try that I get an error output [...] Fatal server error: no screens found [...]. Moreover, I made sure that lightdm-gtk-greeter is installed but that did not help either. Please excuse my not including complete outputs/logs; I am writing this post from another computer and it's hard to manually copy the complete logs. Also, I've seen several posts that had to do with similar problems, but either there was no fix, or the one suggested did not work for me. In closing: Please help! I very much hope to avoid re-installing Ubuntu from scratch! :) Alex @mosi I did not manage to fix the NVIDIA kernel driver as per your instructions. I should perhaps mention that I'm on a Dell XPS15 laptop with an NVIDIA Optimus graphics card, and that I have bumblebee installed (which installs nvidia drivers during its installation, I believe). Issuing the mentioned commands I get the following: ~$uname -r 3.0.0-12-generic ~$lsmod | grep -i nvidia nvidia 11713772 0 ~$dmesg | grep -i nvidia [ 8.980041] nvidia: module license 'NVIDIA' taints kernel. [ 9.354860] nvidia 0000:01:00.0: power state changed by ACPI to D0 [ 9.354864] nvidia 0000:01:00.0: power state changed by ACPI to D0 [ 9.354868] nvidia 0000:01:00.0: enabling device (0006 -> 0007) [ 9.354873] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 9.354879] nvidia 0000:01:00.0: setting latency timer to 64 [ 9.355052] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 280.13 Wed Jul 27 16:53:56 PDT 2011 Also, running aptitude search nvidia gives me the following: p nvidia-173 - NVIDIA binary Xorg driver, kernel module a p nvidia-173-dev - NVIDIA binary Xorg driver development file p nvidia-173-updates - NVIDIA binary Xorg driver, kernel module a p nvidia-173-updates-dev - NVIDIA binary Xorg driver development file p nvidia-96 - NVIDIA binary Xorg driver, kernel module a p nvidia-96-dev - NVIDIA binary Xorg driver development file p nvidia-96-updates - NVIDIA binary Xorg driver, kernel module a p nvidia-96-updates-dev - NVIDIA binary Xorg driver development file p nvidia-cg-toolkit - Cg Toolkit - GPU Shader Authoring Language p nvidia-common - Find obsolete NVIDIA drivers i nvidia-current - NVIDIA binary Xorg driver, kernel module a p nvidia-current-dev - NVIDIA binary Xorg driver development file c nvidia-current-updates - NVIDIA binary Xorg driver, kernel module a p nvidia-current-updates-dev - NVIDIA binary Xorg driver development file i nvidia-settings - Tool of configuring the NVIDIA graphics dr p nvidia-settings-updates - Tool of configuring the NVIDIA graphics dr v nvidia-va-driver - v nvidia-va-driver - I've tried manually installing (sudo aptitude install <package>) packages nvidia-common and nvidia-settings-updates but to no avail. For example, sudo aptitude install nvidia-settings-updates returns the following log: Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... No packages will be installed, upgraded, or removed. 0 packages upgraded, 0 newly installed, 0 to remove and 83 not upgraded. Need to get 0 B of archives. After unpacking 0 B will be used. Writing extended state information... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... The same happens with the Linux headers (i.e. I cannot seem to be able to install linux-headers-3.0.0-12-generic). The output of aptitude search linux-headers is as follows: v linux-headers - v linux-headers - v linux-headers-2.6 - i linux-headers-2.6.38-11 - Header files related to Linux kernel versi i linux-headers-2.6.38-11-generic - Linux kernel headers for version 2.6.38 on i A linux-headers-2.6.38-8 - Header files related to Linux kernel versi i A linux-headers-2.6.38-8-generic - Linux kernel headers for version 2.6.38 on v linux-headers-3 - v linux-headers-3.0 - v linux-headers-3.0 - i A linux-headers-3.0.0-12 - Header files related to Linux kernel versi p linux-headers-3.0.0-12-generic - Linux kernel headers for version 3.0.0 on p linux-headers-3.0.0-12-generic- - Linux kernel headers for version 3.0.0 on p linux-headers-3.0.0-12-server - Linux kernel headers for version 3.0.0 on p linux-headers-3.0.0-12-virtual - Linux kernel headers for version 3.0.0 on p linux-headers-generic - Generic Linux kernel headers p linux-headers-generic-pae - Generic Linux kernel headers v linux-headers-lbm - v linux-headers-lbm - v linux-headers-lbm-2.6 - v linux-headers-lbm-2.6 - p linux-headers-lbm-3.0.0-12-gene - Header files related to linux-backports-mo p linux-headers-lbm-3.0.0-12-gene - Header files related to linux-backports-mo p linux-headers-lbm-3.0.0-12-serv - Header files related to linux-backports-mo p linux-headers-server - Linux kernel headers on Server Equipment. p linux-headers-virtual - Linux kernel headers for virtual machines @heartsmagic I did try purging and reinstalling any nvidia driver packages, but it did not seem to make a difference, My xorg.conf file contains the following: # nvidia-xconfig: X configuration file generated by nvidia-xconfig # nvidia-xconfig: version 280.13 ([email protected]) Wed Jul 27 17:15:58 PDT 2011 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "Unknown" HorizSync 28.0 - 33.0 VertRefresh 43.0 - 72.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection

  Read the article

• Bluetooth light not turned on and bluetooth also not working on vostro 1014

  - by Dinesh Kumar

  after running following command dmesg | grep -i bluetooth [ 17.106250] Bluetooth: Core ver 2.16 [ 17.107845] Bluetooth: HCI device and connection manager initialized [ 17.107847] Bluetooth: HCI socket layer initialized [ 17.107849] Bluetooth: L2CAP socket layer initialized [ 17.107857] Bluetooth: SCO socket layer initialized [ 18.853255] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 18.853260] Bluetooth: BNEP filters: protocol multicast [ 18.859350] Bluetooth: RFCOMM TTY layer initialized [ 18.859355] Bluetooth: RFCOMM socket layer initialized [ 18.859357] Bluetooth: RFCOMM ver 1.11 [14998.338293] init: bluetooth main process ended, respawning

  Read the article

• how to reset gnome panel?

  - by Matt

  I think my gnome-panel is messed up because I alt+right click it and nothing pops up. I'm on 12.04, classic gnome desktop. so I used locate and found gnome-panel in .gconf somewhere, how do I clear just gnome-panel's settings so that I can add things to my panel again? edit: matt: ~/.gconf $ find|grep -iw panel ./desktop/ibus/panel ./desktop/ibus/panel/%gconf.xml ./apps/gnome-settings/gnome-panel ./apps/gnome-settings/gnome-panel/%gconf.xml

  Read the article

• How to setup Dual Head with "radeon" driver for R770?

  - by user1709408

  I want to make dual head setup without xrandr but with Xinerama. I put "Screen 1" line into xorg.conf, but card still show identical output on DVI-2 and DVI-3 It is important to use xinerama for me (to glue three monitors), that's why i decide not to use ranrd (randr is incompatible with xinerama as i read somewhere) Here is my videocard (HD 4850 X2): lspci | grep R700 03:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI R700 [Radeon HD 4850] 04:00.0 Display controller: Advanced Micro Devices [AMD] nee ATI R700 [Radeon HD 4850] Here is how monitors are connected: grep "DVI" /var/log/Xorg.0.log [ 1210.002] (II) RADEON(0): Output DVI-0 using monitor section Monitor0 [ 1210.048] (II) RADEON(0): Output DVI-1 has no monitor section [ 1210.079] (II) RADEON(0): EDID for output DVI-0 [ 1210.080] (II) RADEON(0): Printing probed modes for output DVI-0 [ 1210.128] (II) RADEON(0): EDID for output DVI-1 [ 1210.128] (II) RADEON(0): Output DVI-0 connected [ 1210.128] (II) RADEON(0): Output DVI-1 disconnected [ 1210.128] (II) RADEON(0): Output DVI-0 using initial mode 1920x1200 [ 1210.160] (II) RADEON(1): Output DVI-2 using monitor section Monitor2 [ 1210.215] (II) RADEON(1): Output DVI-3 has no monitor section [ 1210.246] (II) RADEON(1): EDID for output DVI-2 [ 1210.247] (II) RADEON(1): Printing probed modes for output DVI-2 [ 1210.299] (II) RADEON(1): EDID for output DVI-3 [ 1210.300] (II) RADEON(1): Printing probed modes for output DVI-3 [ 1210.300] (II) RADEON(1): Output DVI-2 connected [ 1210.300] (II) RADEON(1): Output DVI-3 connected [ 1210.300] (II) RADEON(1): Output DVI-2 using initial mode 1920x1200 [ 1210.300] (II) RADEON(1): Output DVI-3 using initial mode 1920x1200 Here is my /etc/X11/xorg.conf Section "ServerFlags" Option "RandR" "0" Option "Xinerama" "1" EndSection Section "ServerLayout" Identifier "Three Head Layout" Screen "MyPrecious0" Screen "MyPrecious2" RightOf "MyPrecious0" Screen "MyPrecious3" LeftOf "MyPrecious0" EndSection Section "Screen" Identifier "MyPrecious0" Monitor "Monitor0" Device "Device300" EndSection Section "Screen" Identifier "MyPrecious2" Monitor "Monitor2" Device "Device400" EndSection Section "Screen" Identifier "MyPrecious3" Monitor "Monitor3" Device "Device401" EndSection Section "Device" Identifier "Device300" BusID "PCI:3:0:0" Screen 0 Driver "radeon" EndSection Section "Device" Identifier "Device400" BusID "PCI:4:0:0" Screen 0 Driver "radeon" EndSection Section "Device" Identifier "Device401" BusID "PCI:4:0:0" Screen 1 Driver "radeon" EndSection Section "Monitor" Identifier "Monitor0" EndSection Section "Monitor" Identifier "Monitor2" EndSection Section "Monitor" Identifier "Monitor3" EndSection I tried to switch to vesa driver (didn't work for me) I tried to add options like Option "ZaphodHeads" "DVI-2" and Option "ZaphodHeads" "DVI-3" into sections "Device 400" and "Device 401" (this didn't help because "ZaphodHeads" option is for ranrd, and randr is disabled by decision) I tried to merge sections "Device 400" and "Device 401" into one section and add Option "ZaphodHeads" "DVI-2,DVI-3" (see comment about randr above) single section setup helps to change log line RADEON(1): Output DVI-3 has no monitor section into RADEON(1): Output DVI-3 using monitor section Monitor3 but nothing was enough to switch from screen cloning to separate screens. This problem (lack of documentation on radeon driver) is similar to these: Radeon display driver clones monitors while using Xinerama (moderators decision to close that problem was wrong) Ubuntu 12.10 multi-monitor setup isn't working The problem is solvable, because this hardware worked as three headed for me earlier with gentoo/xorg-server-1.3 Xorg -configure creates setup for the first monitor on the first GPU Please don't advise to use fglrx/aticonfig/amdcccle (this goes against my religion beliefs)

  Read the article

< Previous Page | 24 25 26 27 28 29 30 31 32 33 34 35  | Next Page >