Search Results

Search found 8567 results on 343 pages for 'commands unix'.

Page 280/343 | < Previous Page | 276 277 278 279 280 281 282 283 284 285 286 287  | Next Page >

• Debian network bridge configuration - /etc/network/interfaces

  - by Mathias

  I'm running a Lenny Xen dom0 hosting multiple virtual machines in a routed IP setup. To get an additional private subnet, I created the bridge xenbr0 in the dom0 with the following commands: brctl addbr xenbr0 ifconfig xenbr0 10.0.0.1 netmask 255.255.255.0 ifconfig xenbr0 up This works as expected, and domU interfaces are added to the bridge by Xen on VM start. My only problem is: how the heck do i specify this configuration in /etc/network/interfaces that it remains permanent and the bridge is available after a reboot? I tried the following config as found on a lot of tutorials: auto xenbr0 iface xenbr0 inet static address 10.0.0.1 netmask 255.255.255.0 network 10.0.0.0 broadcast 10.0.0.255 bridge_stp no I get 2 different errors, depending on if the bridge already exists or not. If it doesn't exist: root@dom0:~# brctl show bridge name bridge id STP enabled interfaces root@dom0:~# /etc/init.d/networking restart Reconfiguring network interfaces...if-up.d/mountnfs[eth0]: waiting for interface xenbr0 before doing NFS mounts (warning). SIOCSIFADDR: No such device xenbr0: ERROR while getting interface flags: No such device SIOCSIFNETMASK: No such device SIOCSIFBRDADDR: No such device xenbr0: ERROR while getting interface flags: No such device xenbr0: ERROR while getting interface flags: No such device Failed to bring up xenbr0. done. And if it exists: root@dom0:~# brctl show bridge name bridge id STP enabled interfaces xenbr0 8000.000000000000 no root@dom0:~# /etc/init.d/networking restart Reconfiguring network interfaces...if-up.d/mountnfs[eth0]: waiting for interface xenbr0 before doing NFS mounts (warning). RTNETLINK answers: File exists Failed to bring up xenbr0. done. Could anyone point me in the right direction please? The bridge works fine when created manually, i just need the right config file entries. The most tutorials I found add some devices to the bridge in the config, is that maybe the problem why it is not working? I don't have any interfaces I want to add to the bridge on creation as they get added later on VM start... Thanks, Mathias

  Read the article

• Compile PHP 5.3.2 with intl extension on Snow Leopard 10.6.3

  - by fsb

  Does anyone have some tips on compiling PHP's intl extension on PHP? I'm getting compile errors each way I try it and I've been googling for ages and getting nowhere. Any help greatly appreciated. When make gets to the huge gcc command to compile libphp5.bundle, I get the following error: Undefined symbols: "___gxx_personality_v0", referenced from: icu_4_2::MessageFormatAdapter::getArgTypeList(icu_4_2::MessageFormat const&, int&)in msgformat_helpers.o _umsg_parse_helper in msgformat_helpers.o _umsg_format_arg_count in msgformat_helpers.o _umsg_format_helper in msgformat_helpers.o CIE in msgformat_helpers.o ld: symbol(s) not found collect2: ld returned 1 exit status make: *** [libs/libphp5.bundle] Error 1 My compile commands are: MACOSX_DEPLOYMENT_TARGET=10.6 CFLAGS="-arch x86_64 -g -Os -pipe -no-cpp-precomp" CCFLAGS="-arch x86_64 -g -Os -pipe" CXXFLAGS="-arch x86_64 -g -Os -pipe" LDFLAGS="-arch x86_64 -bind_at_load" export CFLAGS CXXFLAGS LDFLAGS CCFLAGS MACOSX_DEPLOYMENT_TARGET ./configure --prefix=/usr \ --mandir=/usr/share/man \ --infodir=/usr/share/info \ --sysconfdir=/private/etc \ --with-apxs2=/usr/sbin/apxs \ --enable-cli \ --with-config-file-path=/etc \ --with-libxml-dir=/usr \ --with-openssl=/usr \ --with-zlib=/usr \ --with-bz2=/usr \ --with-curl=/usr \ --with-gd \ --with-jpeg-dir=/src/jpeg/jpeg-local \ --with-png-dir=/usr/X11R6 \ --with-freetype-dir=/usr/X11R6 \ --with-xpm-dir=/usr/X11R6 \ --with-ldap=/usr \ --with-ldap-sasl=/usr \ --enable-mbstring \ --enable-mbregex \ --with-mysql=mysqlnd \ --with-mysqli=mysqlnd \ --with-pdo-mysql=mysqlnd \ --with-mysql-sock=/var/mysql/mysql.sock \ --with-iodbc=/usr \ --enable-shmop \ --with-snmp=/usr \ --enable-soap \ --enable-sockets \ --enable-sysvmsg \ --enable-sysvsem \ --enable-sysvshm \ --with-xmlrpc \ --with-iconv-dir=/usr \ --with-xsl=/usr \ --with-pcre-regex=/src/pcre/pcre-local/usr/local \ --with-pcre-dir=/src/pcre/pcre-local/usr/local \ --with-icu-dir=/usr/local \ --enable-intl export EXTRA_CFLAGS="-lresolv" make

  Read the article

• APACHE - PHP - Bounce emails

  - by user1179459

  I want to improve our mail server lists by handling all the bounces we get in our websites. I have a website which has over 8000+ users and another website which as over 1500+ users, they are emailed various notifications every second, ie. job alerts, email alerts, I am using POP connections with EXIM on APACHE server, most scripts are based on PHP language generates email on the fly. Problems i have But some users has registered long time ago and now quite few has bounce email address Some users register with dummy emails like [email protected] which never existed but a valid email address, any chance of stopping this without asking them login to the email account and clicking links which dont work most times.. (too annoying to the end user) Server is sending unnecessary emails can be avoided if i know they dont exists ? Solutions i need to have Is there a way i can download the bounce email list somewhere (WHM/Cpanel), i know exim mail has it but its not readable (i need a file like CSV or something similar to scan them over and write a php script to delete the users from the database ?) I need to know if there is any function in the PHP that can check the existence of the email address on the fly ? so that i can set the email send function in the mailer class to check before it sends out. On the server will bouncing emails are going to eatup lots of server resources ? like memory/cpu on processing them ? or are they are minimal where we dont have to worry about this at all ? May be a opensoruce or linux software to capture them and view them in a report basis and cleaning them up ? I am not a linux expert or server admin but i do lot of PHP coding, so please be descriptive of the solutions specially if they are linux commands Thank you!

  Read the article

• What command should be used to connect via SSH through squid proxy?

  - by Raul Cardoso

  I have set up a Squid HTTP Proxy (in centOS) and intended to use it also for ssh connections. Managed to configure putty (in a windows client) to use this proxy while connecting by ssh. Confirmed in the "target host" that the ssh connection was coming from Proxy server ip instead of the windows client IP. Used: targethost: 22 for ssh proxyserv: 3128 for proxy (along with proxy credentials) I'm now having problems connecting to the "target host" using Ubuntu and the same proxy server. I have tried the following: me@mycomp:~$ connect-proxy -H test@proxyserv:3128 targethost 22 Enter proxy authentication password for test@proxyserv: SSH-2.0-OpenSSH_6.2p2 Ubuntu-6 It hangs in last line, expecting some input. All attempts resulted in a "Protocol mismatch." error. Putty successfully connects to the http proxy and sends credentials, showing me ssh login right away. - How to do (with commands in Ubuntu) the same putty does? - Is there any other way than connect-proxy command to do this? Edit: Also tried the following with same result ("Protocol mismatch") me@mycomp:~$ connect-proxy -H test@proxyserv:3128 targethost 22 ssh -l myshel_login Thanks in advance Edit: Solution details (thanks to NickW pointing the right way) installed corkscrew and added to ssh_config Host targethost ProxyCommand corkscrew proxyserv 3128 %h %p /etc/ssh/proxypass created proxypass file login:password Restarted ssh and used a simple ssh command ssh mylogin@targethost (ssh password was asked as usual)

  Read the article

• ssh over a tunnel in order to configure auto login

  - by Vihaan Verma

  I m trying to copy the id_rsa.pub key to the server. The server in my case also has a virutal machine called dev which runs on the host machine. I copied the id_rsa.pub key to the host for auto log in using this command. ssh-copy-id -i ~/.ssh/id_rsa.pub vickey@host which worked fine and I can auto log in to host. I also wanted to auto log in to the dev machine. I know I can just copy the contents of authorized_keys from the host machine to the dev machine but I m looking for a command line of doing things. Creating a tunnel seemed like the solution ssh vickey@host -L 2000:dev:22 -N now when I tried ssh-copy-id -i ~/.ssh/id_rsa.pub vickey@localhost -P 2000 the password that worked here was of my local machine , I expected it to ask me password of my dev machine. The above command adds the pub key to the local machine and not to the dev machine. However this commands asks me for the dev password and copies the files. scp -P 2000 vickey@localhost:/home/vickey/trash/vim . vickey@localhost's password: vim 100% 111 0.1KB/s 00:00 How do I do the same with ssh-copy-id ?

  Read the article

• How to create btrfs RAID-1 filesystem (assertion error in mkfs.btrfs)?

  - by amcnabb

  I tried to make a btrfs RAID-1 filesystem in "degraded mode" by following the btrfs UseCases instructions but hit a fatal assertion error. Why is this failing, and is there any workaround? The instructions I followed are at: https://btrfs.wiki.kernel.org/articles/u/s/e/UseCases_8bd8.html The output of the mkfs.btrfs and btrfs filesystem show commands is: # mkfs.btrfs -m raid1 -d raid1 /dev/sdd1 /dev/loop1 WARNING! - Btrfs Btrfs v0.19 IS EXPERIMENTAL WARNING! - see http://btrfs.wiki.kernel.org before using failed to read /dev/sr0 adding device /dev/loop1 id 2 mkfs.btrfs: volumes.c:802: btrfs_alloc_chunk: Assertion `!(ret)' failed. zsh: abort (core dumped) mkfs.btrfs -m raid1 -d raid1 /dev/sdd1 /dev/loop1 # btrfs filesystem show failed to read /dev/sr0 Label: none uuid: 773908b8-acca-4c30-85c5-6642b06de22b Total devices 1 FS bytes used 28.00KB devid 1 size 223.13GB used 2.04GB path /dev/sda5 Label: none uuid: 0f06f1a8-5f5f-4b92-a55c-b827bcbcc840 Total devices 2 FS bytes used 24.00KB devid 2 size 2.00GB used 0.00 path /dev/loop1 devid 1 size 1.36TB used 20.00MB path /dev/sdd1 Btrfs Btrfs v0.19 # EDIT: It turns out that the filesystem isn't mountable: # mount /dev/sdd1 /mnt/big2 mount: wrong fs type, bad option, bad superblock on /dev/sdd1, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so # So, why did the mkfs fail, and is there any workaround?

  Read the article

• In GNU Screen, Recalled bash history command displays one character position to the left of actual location

  - by vergueishon

  I am running Red Hat 5 32-bit (2.6.18-194.26.1.el5). The issue is that when I recall any previous command in bash's history, the first character in the command is displayed immediately after the shell prompt, without any intervening space, likeso: \[me@mymachine tmp]$man mysql If I enter a Ctrl-C, and retype the command, it looks likeso: \[me@mymachine tmp]$ man mysql This makes recalling a command and editing it before re-entering a real pain. Basically, if I try to edit a recalled command, my changes occur one character position to the left (I believe) of what I see on the screen. It's a bit tedious to describe, and appears to only happen with commands with a large number of arguments. UPDATE: The contents of /etc/sysconfig/bash-prompt-screen, 1 #!/bin/bash 2 echo -n $'\033'"_${USER}@${HOSTNAME%%.*}:${PWD/#$HOME/~}"$'\033\\\\' and the contents of /etc/bashrc, 24 screen) 25 if [ -e /etc/sysconfig/bash-prompt-screen ]; then 26 PROMPT_COMMAND=/etc/sysconfig/bash-prompt-screen 27 else 28 PROMPT_COMMAND='echo -ne "\033_${USER}@${HOSTNAME%%.*}:${PWD/#$HOME/~}"; echo -ne "\033\\"' 29 fi 30 ;; I've disable bash-prompt-screen by renaming it--this fixed it. It's entirely possible that there is a fix to the bash-prompt-screen prompt line in the latest version of screen for RHEL 5. The error is seen under Screen version 4.00.03 (FAU) 23-Oct-06. (I noticed an update in the queue, which is installing as I write this.)

  Read the article

• Mysql cluster strange behaviour

  - by Champion

  Hi Guys, I have 2 mysql clusters on two different servers with management node on each of them. It went down someway. I ran following commands to start the cluster: Start the management node on srv1: srv1: mysqlc/bin/ndb_mgmd --initial -f my_cluster/conf/config.ini --configdir=/home/mysql_cluster/my_cluster/conf Start the management node on srv2: srv2: mysqlc/bin/ndb_mgmd --initial -f my_cluster/conf/config.ini --configdir=/home/mysql_cluster/my_cluster/conf Start the ndbd nodes on srv1: srv1: mysqlc/bin/ndbd --initial -c localhost:1186 Start the ndbd nodes on srv2: srv2: mysqlc/bin/ndbd --initial -c localhost:1186 Start mysqld server on srv1: srv1: mysqlc/bin/mysqld --defaults-file=my_cluster/conf/my.cnf --user=root & and here is the problem. mysql server not loading the data. Only database names are present. All the tables which are ENGINE=ndbcluster are not being loaded. Tables with ENGINE=myisam are being loaded. Backup scripts helped me load the data. But this way I can't use cluster setup. Similar issue appeared when i started srv2. How can I resolve this issue ?

  Read the article

• Subversion Edge LDAP (require CAC Certificate not Username and Password)

  - by Frank Hale

  What I've Done: I've successfully installed and configured Subversion Edge 3.1.2 with LDAP support on a Windows 2008 server. I have configured LDAP users and am able to use LDAP credentials to work on repositories just fine. No issues whatsoever. Works great! What I Want To Do: I've been searching for several hours now in hopes to find some information on how to configure Subversion Edge server to require client certificates for user authentication against an LDAP environment. I have not found anything yet that gives me an indication of how to do it. I know there are SVN clients that are capable of prompting for CAC certificates but I cannot figure out how to set my server up to require it. NOTE: CAC authentication is already setup and working in the windows environment. Desired Outcome: When running svn commands that require authentication against my Subversion Edge Server I want it to prompt me for my CAC certificate instead of my Active Directory username and password. If anyone has any information on this I'd greatly appreciate it. EDIT: I'm still digging so if I find out anything I'll update this question with what I found.

  Read the article

• Authenticated User Impersonation in Classic ASP under IIS7

  - by user52663

  I've recently moved one of our servers from Server 2003 and IIS6 to Server 2008 R2 and IIS7 (technically IIS7.5 I suppose). In doing so I am transitioning a small account management tool written in classic ASP and have run into a problem with user impersonation. Extensive searching hasn't been much help so far. Under IIS6, the site was configured to impersonate the logged-in user. Thus, if a domain admin logged in, he was able to run commands to create user directories, adjust permissions, etc. Using Procmon you can see the processes executing as that user. This worked fine. However, with the same code under IIS7, I am unable to get this behavior. I have enabled Basic Authentication, disabled Anonymous Auth, enabled impersonation and have changed the app pool to classic instead of integrated pipelining. Everything seems to be configured correctly, however, all the processes launched by the classic ASP site continue to run as the default AppPool identity and not the logged-in user. If it matters, programs are being launched with code such as: set Wsh = Server.CreateObject("WScript.Shell") Wsh.Run("cmd.exe /C mkdir D:\users\foo") Monitoring via Procmon shows cmd.exe being run as either "Classic .NET AppPool" or "DefaultAppPool" depending on the pipeline mode. Any suggestions on how to get the classic ASP site to impersonate and execute as the authenticated user would be great. Thanks!

  Read the article

• Passing two arguments to a command using pipes

  - by firebat

  Usually, we only need to pass one argument: echo abc | cat echo abc | cat some_file - echo abc | cat - some_file Is there a way to pass two arguments? Something like {echo abc , echo xyz} | cat cat `echo abc` `echo xyz` I could just store both results in a file first echo abc > file1 echo xyz > file2 cat file1 file2 But then I might accidentally overwrite a file, which is not ok. This is going into a non-interactive script. Basically, I need a way to pass the results of two arbitrary commands to cat without writing to a file. UPDATE: Sorry, the example masks the problem. While { echo abc ; echo xyz ; } | cat does seem to work, the output is due to the echos, not the cat. A better example would be { cut -f2 -d, file1; cut -f1 -d, file2; } | paste -d, which does not work as expected. With file1: a,b c,d file2: 1,2 3,4 Expected output is: b,1 d,3 RESOLVED: Use process substitution: cat <(command1) <(command2) Alternatively, make named pipes using mkfifo: mkfifo temp1 mkfifo temp2 command1 > temp1 & command2 > temp2 & cat temp1 temp2 Less elegant and more verbose, but works fine, as long as you make sure temp1 and temp2 don't exist before hand.

  Read the article

• Open Source Chef Server can't upload cookbook

  - by veilig

  I just setup the open source chef server on an Ubuntu 12.04 EC2 instance, I've setup my webui and am able to get responses from my knife commands ie: knife node list, knife client list, knife user list, etc... I'm able to update roles, databags, environments, etc... but I cannot upload any cookbooks. I'm running my workstation on Mac OSX. I keep getting this output at the end of my command knife cookbook upload -VV curl. Doesn't matter what cookbook I upload, or if I upload them all - I keep getting the same response DEBUG: Chef::HTTP calling Chef::HTTP::ValidateContentLength#handle_response DEBUG: Chef::HTTP calling Chef::HTTP::RemoteRequestID#handle_response DEBUG: Chef::HTTP calling Chef::HTTP::Authenticator#handle_response DEBUG: Chef::HTTP calling Chef::HTTP::Decompressor#handle_response DEBUG: Chef::HTTP calling Chef::HTTP::CookieManager#handle_response DEBUG: Chef::HTTP calling Chef::HTTP::JSONToModelOutput#handle_response /usr/local/lib/ruby/gems/2.1.0/gems/chef-12.0.0.alpha.1/lib/chef/http/json_output.rb:51:in `handle_response': undefined method `chomp' for nil:NilClass (NoMethodError) from /usr/local/lib/ruby/gems/2.1.0/gems/chef-12.0.0.alpha.1/lib/chef/http.rb:229:in `block in apply_response_middleware' from /usr/local/lib/ruby/gems/2.1.0/gems/chef-12.0.0.alpha.1/lib/chef/http.rb:227:in `each' from /usr/local/lib/ruby/gems/2.1.0/gems/chef-12.0.0.alpha.1/lib/chef/http.rb:227:in `inject' from /usr/local/lib/ruby/gems/2.1.0/gems/chef-12.0.0.alpha.1/lib/chef/http.rb:227:in `apply_response_middleware' from /usr/local/lib/ruby/gems/2.1.0/gems/chef-12.0.0.alpha.1/lib/chef/http.rb:144:in `request' from /usr/local/lib/ruby/gems/2.1.0/gems/chef-12.0.0.alpha.1/lib/chef/http.rb:118:in `put' from /usr/local/lib/ruby/gems/2.1.0/gems/chef-12.0.0.alpha.1/lib/chef/cookbook_uploader.rb:123:in `block in uploader_function_for' from /usr/local/lib/ruby/gems/2.1.0/gems/chef-12.0.0.alpha.1/lib/chef/util/threaded_job_queue.rb:52:in `call' from /usr/local/lib/ruby/gems/2.1.0/gems/chef-12.0.0.alpha.1/lib/chef/util/threaded_job_queue.rb:52:in `block (3 levels) in process' from /usr/local/lib/ruby/gems/2.1.0/gems/chef-12.0.0.alpha.1/lib/chef/util/threaded_job_queue.rb:50:in `loop' from /usr/local/lib/ruby/gems/2.1.0/gems/chef-12.0.0.alpha.1/lib/chef/util/threaded_job_queue.rb:50:in `block (2 levels) in process'INFO: HTTP Request Returned 204 No Content:

  Read the article

• Slow performance of MySQL database on one server and fast on another one, with similar configurations

  - by Alon_A

  We have a web application that run on two servers of GoDaddy. We experince slow preformance on our production server, although it has stronger hardware then the testing one, and it is dedicated. I'll start with the configurations. Testing: CentOS Linux 5.8, Linux 2.6.18-028stab101.1 on i686 Intel(R) Xeon(R) CPU L5609 @ 1.87GHz, 8 cores 60 GB total, 6.03 GB used Apache/2.2.3 (CentOS) MySQL 5.5.21-log PHP Version 5.3.15 Production: CentOS Linux 6.2, Linux 2.6.18-028stab101.1 on x86_64 Intel(R) Xeon(R) CPU L5410 @ 2.33GHz, 8 cores 120 GB total, 2.12 GB used Apache/2.2.15 (CentOS) MySQL 5.5.27-log - MySQL Community Server (GPL) by Remi PHP Version 5.3.15 We are running the same code on both servers. The Problem We have some function that executes ~30000 PDO-exec commands. On our testing server it takes about 1.5-2 minutes to complete and our production server it can take more then 15 minutes to complete. As you can see here, from qcachegrind: Researching the problem, we've checked the live graphs on phpMyAdmin and discovered that the MySQL server on our testing server was preforming at steady level of 1000 execution statements per 2 seconds, while the slow production MySQL server was only 250 executions statements per 2 seconds and not steady at all, jumping from 0 to 250 every seconds. You can clearly see it in the graphs: Testing server: Production server: You can see here the comparison between both of the configuration of the MySQL servers.Left is the fast testing and right is the slow production. The differences are highlighted, but I cant find anything that can cause such a behavior difference, as the configs are mostly the same. Maybe you can see something that I cant see. Note that our tables are all InnoDB, so the MyISAM difference is (probably) not relevant. Maybe it is the MySQL Community Server (GPL) that is installed on the production server that can cause the slow performance? Or maybe it needs to be configured differently for 64bit ? I'm currently out of ideas...

  Read the article

• SVNParentPath directory authorization

  - by James

  The question is a bit stupid but I can't get it sorted. I have a server with SVN that uses the SVNPath directive in httpd.conf and all works fine with path authorizations. Now I'm installing a second serer where I'm going to use SVNParentPath directive and I've got it all running except I can't get the authorization part quite right. From what I understand it's the same as when you use SVNPath but you need to specificy the repo name before the folder name.. My SVNParentPath is /srv/svn/ and I created a directory /srv/svn/testproj and then ran svnadmin create /srv/svn/testproj Now i'm configuring my authorization file: [/] * = svnadmin = rw adusgi = rw [testproj:/svn/testproj] demada = rw degari = rw scarja = rw Now if I try to commit /svn/testproj using user svnadmin or adusgi all is fine. If I try for example demada it doesn't work... (I've run the htpasswd2 commands for the user obviously. The directory is correct or atleast thats how I use the directory with the SVNPath server thats already running, the part I think I'm getting wrong is the repo name, I just used the directory name but what am I really supposed to put there?? Thank you, James

  Read the article

• mysql cmd promt import data.sql

  - by udhaya

  i wanna import sql using cmd prompt. first open windows cmd prompt, navigate to xampp/mysql/bin folder & run mysql this error occurs D:\Program Files\xampp\mysql\bin>mysql ERROR 1045 (28000): Access denied for user 'ODBC'@'localhost' (using password: N O) D:\Program Files\xampp\mysql\bin>mysql -u root -p -h localhost dev1base < dev1b ase.sql Enter password: D:\Program Files\xampp\mysql\bin> D:\Program Files\xampp\mysql\bin>mysql -u root Welcome to the MySQL monitor. Commands end with ; or \g. Your MySQL connection id is 104 Server version: 5.0.51a Source distribution Type 'help;' or '\h' for help. Type '\c' to clear the buffer. mysql> mysql> -h localhost dev1base < dev1base.sql -> -> -> ->

  Read the article

• Running Upstart user jobs on startup

  - by dgel

  I am running Ubuntu server 11.04. I have created an Upstart user job as described here. I have the following file at my /home/myuser/.init/sensors.conf: start on started mysql stop on stopping mysql chdir /home/myuser/mydir/project exec /home/myuser/mydir/env/bin/python /home/myuser/mydir/project/manage.py sensors respawn respawn limit 10 90 As myuser I can start, stop, and reload the job fine- it works perfectly: $ start sensors sensors start/running, process 1332 $ stop sensors sensors stop/waiting The problem is that the job is not starting automatically at boot when mysql starts. After a fresh boot, mysql is running but my sensors job is not. What's strange, is that although the job doesn't begin on bootup, if I use sudo to restart mysql it does indeed start my job. The following commands are run as myuser from a fresh startup: $ status sensors sensors stop/waiting $ sudo restart mysql mysql start/running, process 1209 $ status sensors sensors start/running, process 1229 The documentation for Upstart user jobs is pretty limited. What is the correct technique to have a user job start automatically on startup of the system? I know I can just throw something in rc.local to start it, or I could move my sensors.conf to /etc/init but I'm curious if there is a way to do it using just Upstart.

  Read the article

• Midnight Commander Woes: Output while panels are active, and tab completion.

  - by Eddie Parker

  I'm trying out midnight commander (loved Norton back in the day!) and I'm finding two things hard to work out. I'm curious if there's ways around this or not however. 1) If the panels are active and I issue a command that has a lot of output, it appears to be lost forever. i.e., if the panels are visible and I cat something (i.e., cat /proc/cpuinfo), that info is gone forever once the panels get redrawn. Is there anyway to see the output? I've tried 'ctrl-o', but it appears to just give me a fresh sub-shell and wipes the previous output away. Pausing after every invocation is a bit irritating, so I'd rather not use that option. 2) Tab completion for commands When mc is running, it consumes the tab character for switching panels. Is there any way to get around this so I can still type in paths and what not on the command line? I'm running cygwin if that matters at all.

  Read the article

• Missing boot files in Windows 8

  - by Alex F. Sherman

  I had a partition with Windows 8 Release Preview, Windows' System Reserved partition and the empty space of the beginning of disk. I moved two partitions to the beginning of disk using Ubuntu Live CD and GParted. After that, the Windows Loader didn't boot and throw an error about missing files. I fixed it using the commands: bootsect /nt60 sys /force /mbr bootrec /rebuildbcd bootrec /fixboot bootrec /fixmbr When I used "Automatic repair" option from "Advanced boot" menu, it throw an error like: Windows can't fix your boot problems. For more information see file C:\Windows\System32\LogFiles\Srt\SrtTrail.txt In this file I found a description of the system repair actions and at the end of file: Boot status indicates that the OS booted successfully. Now, when I use the Advanced boot menu from Windows 8 (PC settings - General - Advanced startup) I receive an error: Restart your PC to try again. It looks like something didn't load correctly. Restarting might fix the problem. If this happens more than once, you might also be able to find help by searching online for the specific error code. Erorr code: 0x8007090. 0x80070490 is the error code ERROR_NOT_FOUND. What are the missing boot files and how can I restore them? List of files in System Reserved Partition: B:\bootmgr B:\BOOTNXT B:\Boot\BCD B:\Boot\BCD.LOG B:\Boot\BCD.LOG1 B:\Boot\BCD.LOG2 B:\Boot\BOOTSTAT.DAT B:\Boot\Fonts B:\Boot\memtest.exe B:\Boot\qps-ploc B:\Boot\Resources B:\Boot\Resources\bootres.dll and many *.mui and *.ttf files.

  Read the article

• How can I run Gnome or KDE locally in Cygwin?

  - by John Peter Thompson Garcés

  Apparently it is possible to do this using cygwin ports, as can be seen in screenshots. I followed this how-to to get apt-cygports set up, and I used it to install gnome-session. This how-to supposedly gives the commands needed to run Gnome or KDE, but whenever I try to run Gnome, a blank X-window pops up and then quickly disappears. Here is the terminal output: $ startx /usr/bin/dbus-launch gnome-session xauth: file /home/jpthomps/.serverauth.4168 does not exist Welcome to the XWin X Server Vendor: The Cygwin/X Project Release: 1.10.3.0 OS: Windows 7 Service Pack 1 [Windows NT 6.1 build 7601] (WoW64) Package: version 1.10.3-12 built 2011-08-22 XWin was started with the following command line: /usr/bin/X :0 -auth /home/jpthomps/.serverauth.4168 (II) xorg.conf is not supported (II) See http://x.cygwin.com/docs/faq/cygwin-x-faq.html for more information LoadPreferences: /home/jpthomps/.XWinrc not found LoadPreferences: Loading /etc/X11/system.XWinrc LoadPreferences: Done parsing the configuration file... winDetectSupportedEngines - DirectDraw installed, allowing ShadowDD winDetectSupportedEngines - Windows NT, allowing PrimaryDD winDetectSupportedEngines - DirectDraw4 installed, allowing ShadowDDNL winDetectSupportedEngines - Returning, supported engines 0000001f winSetEngine - Using Shadow DirectDraw NonLocking winScreenInit - Using Windows display depth of 32 bits per pixel winFinishScreenInitFB - Masks: 00ff0000 0000ff00 000000ff Screen 0 added at virtual desktop coordinate (0,0). MIT-SHM extension disabled due to lack of kernel support XFree86-Bigfont extension local-client optimization disabled due to lack of shared memory support in the kernel (II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so (II) GLX: Initialized DRISWRAST GL provider for screen 0 winPointerWarpCursor - Discarding first warp: 637 478 (--) 5 mouse buttons found (--) Setting autorepeat to delay=500, rate=31 (--) Windows keyboard layout: "00000409" (00000409) "US", type 4 (--) Found matching XKB configuration "English (USA)" (--) Model = "pc105" Layout = "us" Variant = "none" Options = "none" Rules = "base" Model = "pc105" Layout = "us" Variant = "none" Options = "none" winBlockHandler - pthread_mutex_unlock() winProcEstablishConnection - winInitClipboard returned. winClipboardProc - DISPLAY=:0.0 winClipboardProc - XOpenDisplay () returned and successfully opened the display. xinit: XFree86_VT property unexpectedly has 0 items instead of 1 xinit: connection to X server lost waiting for X server to shut down winClipboardProc - winClipboardFlushWindowsMessageQueue trapped WM_QUIT message, exiting main loop. winClipboardProc - XDestroyWindow succeeded. winClipboardProc - Clipboard disabled - Exit from server winDeinitMultiWindowWM - Noting shutdown in progress

  Read the article

• Installing/enabling PHP Pecl Intl extension on CentOs 5

  - by Marijn Huizendveld

  Original question: I'm having trouble installing the PHP Pecl Intl extension on my CentOs 5 machine. After installing both icu and libicu with the following commands: $ yum install icu $ yum install libicu I tried to install the Intl extension like so: $ /usr/bin/pecl install intl I selected to search for the default location for the ICU libraries and header files. It ends up crashing like this: checking whether to enable internationalization support... yes, shared checking for icu-config... no checking for location of ICU headers and libraries... not found configure: error: Unable to detect ICU prefix or no failed. Please verify ICU install prefix and make sure icu-config works. ERROR: `/tmp/pear/temp/intl/configure --with-icu-dir=DEFAULT' failed update After successfully installing the development version of icu as suggested by RusAlex (thanks RusAlex) like so: $ yum install libicu-devel I ran into a new problem which I also encountered locally the following command: $ /usr/bin/pecl install intl now produces this error: /private/tmp/pear/temp/intl/collator/collator_class.c:92: error: duplicate 'static' /private/tmp/pear/temp/intl/collator/collator_class.c:96: error: duplicate 'static' /private/tmp/pear/temp/intl/collator/collator_class.c:101: error: duplicate 'static' /private/tmp/pear/temp/intl/collator/collator_class.c:107: error: duplicate 'static' make: *** [collator/collator_class.lo] Error 1 ERROR: `make' failed It appears to have something to do with PHP 5.3 being bundled with Intl already. But how can I enable this extension, if I look in my PHP Info than I cannot find any reference to it...

  Read the article

• Apache / PHP Begins to Deny SQL Requests after about 2000

  - by Daniel Stern

  We have a web page on our server that we use to run administrative scripts. For example, we might run the script "unenrolStudents()" which runs 5,000 SQL SET commands one after another and sets 5000 student entries in an SQL database to unenrolled. However, we are finding that after running a few thousand queries (it is not totally consistent) we will be "locked out" by our server. SYMPTOMS OF LOCKING OUT: - unable to connect to server with winSCP - opening putty with that connection shows a blank screen (no login / pass) - clearing cookies / cache in chrome does NOT fix locking out - other computers in the office ALSO become locked out - locking out can be triggered with a high frequency of requests (10000 in 1 second) or by less over time (10000 in 500 seconds - this will still cause a lockout even though the frequency is much less) We believe this is a security feature of our own Apache. I know we are using Suhosin but I didn't configure it so I don't know. How can I disable this locking effect so that I can confidently run all my SQL requests and they will go through? Has anyone else dealt with this and found workarounds? Thanks DS

  Read the article

• How to set up multiple SSIDs with bandwidth limiting on a single wireless router?

  - by Rahul Narain

  I have an Asus WL-520GU wireless router connected to a cable modem that I use for wireless internet access in my apartment. I would like to set it up so that it provides two SSIDs: one secured and password-protected for my regular use, and a "guest" SSID that's unsecured but throttled to, say, 10% of the available bandwidth. What is the most straightforward way to do this? I've been looking into DD-WRT and Tomato, both of which support my router. DD-WRT supports setting up multiple SSIDs using the GUI, but I don't know if it's possible to limit the bandwidth of each SSID independently; point #12 in this FAQ thread says it's not possible to limit by day or by MAC address, which is discouraging but not conclusive. Tomato allows bandwidth limits in its QoS settings, going by the screenshot here, but multiple SSID support is still experimental and it doesn't look like it will work with the encryption settings or bandwidth limits in the GUI. I'd like to know a good way to do this which gives me the fewest opportunities for screwing up. I'm no stranger to the command line, if that turns out to be what's necessary, but if so, please explain what the commands are doing because I don't have a good mental model of what needs to happen to set this up.

  Read the article

• Ubuntu 11.10 ATI Drivers vesa park

  - by Matthias

  This is probably not an issue, from all I can get it seems my hardware and drivers are properly installed. However when I go to system settings - system info - graphics. I get Driver: VESA:PARK. Experience: Standard. my graphics card is a: Ati Mobility Radeon HD 5470 512MB. I am pretty sure it's not a same-die GPU since there is a fan exhaust at the side of my laptop which I presume is the exhaust for the GPU... I have no clue whatsoever what this means. I installed the ati drivers first using the 'additional drivers' method. However I also decided to look a manual installation up via the terminal since I've had problems before with Ubuntu and ati cards. I used wget and something among the lines of sh dpkg -i. I can recall exactly, I took them from another stackoverflow answer. Anyway, it seems everything is installed properly since it shows up with these commands: sudo lshw -C video fglrxinfo however the first command seems to detect hardware, not the driver per se, although the driver is probably needed to detect the hardware anyway which would indicate its properly installed. I am still not sure about that VES:PARK thing though. I'd like to know what it means.. Also, if someone happens to know a good way of testing if the gpu is connected/being used...some sort of benchmark maybe...I'd like to hear it. P.s. I can find my way around in Ubuntu but I would probably still be considered a rookie by more experienced users.

  Read the article

• RemoteApp shows no certificate available but RD Session host finds it fine

  - by Scott Chamberlain

  I am trying to set up remote app for a internal domain. I have a Root CA that is trusted my all of the end computers, that cert has signed a wildcard cert I am trying to use for the server. I added the pfx of the wildcard cert to the local machine personal store. From there I can use it fine for signing the RD Session Host session. However when I try to set up the signature for Remote App the certificate does not show up. What do I need to do to get my certificate to be available for for use? UPDATE: The Certificate was generated through the following commands: makecert -pe -n "CN=*.vw.local" -a sha1 -sky signature -ic VetWebCA.cer -iv VetWebCA.pvk -sv VetWebComputerWildcard.pvk VetWebComputerWildcard.cer pvk2pfx -pvk VetWebComputerWildcard.pvk -spc VetWebComputerWildcard.cer -pfx VetWebComputerWildcard.pfx The resultant pfx was added to the machine local store via mmc. Oddly, going in to Powershell if I add the -CodeSigningCert flag to find the wildcard certificate it is excluded from the serch results for Get-Childitem in my Cert:\Local Machine\My path, but if I don't include it it is there.

  Read the article

• Uninstall Perl 5.10 and Install 5.8 on Ubuntu 10.04

  - by user48848

  I was using Ubuntu 8.04 with installed Perl 5.8.8. I had installed Bugzilla 3.4.4 with some custom scripts and it was working fine. I had to upgrade Ubuntu from 8.04 to 10.04 and automatically Perl is also upgraded from Perl 5.8 to 5.10. Now, accessing Bugzilla displays an error message related to Perl module. While trying to run checksetup.pl, I am getting the following error message: root@cvsnew:/var/www/bugzilla-3.4# perl checksetup.pl * This is Bugzilla 3.4.3 on perl 5.10.1 * Running on Linux 2.6.32-24-generic-pae #39-Ubuntu SMP Wed Jul 28 07:39:26 UTC 2010 Checking perl modules... Checking for CGI.pm (v3.33) ok: found v3.48 perl: symbol lookup error: lib/i486-linux-gnu-thread-multi/auto/Digest/SHA/SHA.so: undefined symbol: Perl_Tstack_sp_ptr Accessing Bugzilla throws : "500 Internal Server Error". I explored this issue and found that this issue has come up because upgrading Ubuntu upgrades Perl 5.8 to 5.10 automatically. It seems like Perl 5.10.1 isn't binary compatible with the previous. Now, I want to uninstall Perl 5.10.1 and Install Perl 5.8.8 on my Ubuntu 10.04 box. I will appreciate if someone has already done that or share the required steps/commands to do it.

  Read the article

< Previous Page | 276 277 278 279 280 281 282 283 284 285 286 287  | Next Page >