Search Results

Search found 48832 results on 1954 pages for 'ms access 2010'.

Page 280/1954 | < Previous Page | 276 277 278 279 280 281 282 283 284 285 286 287  | Next Page >

• Setup Linksys 3200 remote access

  - by Greg

  I'm trying to setup remote access for my linksys 3200 so that I can configure it through the WAN port. I have turned on remote access, however when I try to connect I get a 404 error. The settings I have are: When I try to access xxx.xxx.xxx.xxx:9999 I just get a 404 error. I have allowed RDP access to a computer behind the router and this works fine on the same IP address. Any idea's on what else I have to do to allow remote management access? UPDATE: I tried changing the port to 80 and it works. Change it back to any other number and it doesn't work. Modem is setup with a DMZ to the router's IP. Why does it only work on port 80? BTW I can't use port 80 because there is a website hosted behind the router.

  Read the article

• Why doesn't the People Pane in Outlook 2010 show appointments for individual contacts?

  - by Curtis

  Outlook 2010 will not show appointments in the people pane. Under the activities tab if I go to All Items then eventually the appointments will show, but this takes a seriously long time. If I then click off the tab to look at another field then return to All Items, all the appointments are gone again. I need to be able to: Open a contact and see when that contact has appointments Open an appointment and see which contacts are attached to that appointment It works well from the appointment card to the contact, but has me completely frustrated going from the contact card to find the appontments. I have tried many things but cannot solve this problem. My set up is as follows: Exchange Server Windows 7 Ultimate Indexing enabled Cached exchange mode enabled Help! This is the whole reason I installed Outlook 2010.

  Read the article

• ms sql 2005 server role problem

  - by Brandon

  On one of our sql 2005 servers we are no longer able to give any users server roles (ex. sysadmin). It appears to be successful both through the UI and through code. But when we check in the db and in the UI the role is unchecked and not shown for the user in the master db. Permissions don't seem to be the issue as we are testing this as system administrator levels of access. There are also no errors in the log. Any ideas? Thanks, Brandon

  Read the article

• Can't move or access WSS Central Administration site

  - by Jim

  We have several WSS Servers: WSS1 WSS2 WSS3 WSS4 SharePoint thinks that Central Administration is on WSS3 and that it can be access via SSL on port 22641. The problem is that central administration is not there. It was removed using the config wizard. We removed central admin from all servers to clean everything out, and we tried installing Central Admin on WSS1. The alternate access mappings still point to central admin on WSS3. We tried deleting the alternate access mappings, but SharePoint won't let you delete central admin's mapping. Later, we removed central admin from all of our servers and tried creating the Central Admin website on WSS3, where SharePoint already thinks it is. But for some reason SharePoint is creating the alternate access mappings using SSL, and we don't have a certificate for the server. Why is SharePoint creating alternate access mappings routing an https internal URL by default? How can we move central administration to a new server? We are using WSS 3.0.

  Read the article

• Upgraded from VS 2008 -> VS 2010. Can't Connect to SQL Server in Staging Environment

  - by Bob Kaufman

  I have a test application written in C#/ASP.NET that I've developed using Visual Studio 2008 Professional/.NET 3.5 which connects to a local SQL Server 2008 Express instance. I upgraded the development machine to Visual Studio 2010 Professional maintaining .NET 3.5 and everything in the development environment continues to work correctly. Upon deployment of the new app to an internal staging machine, that app cannot connect to its local SQL Server 2008 Express database. I get the customary "server not found" error: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible... Does something need to be upgraded on the staging machine to be able to host a Visual Studio 2010/.NET 3.5 application?

  Read the article

• Is there a template for curriculum vitae in Microsoft Word 2010?

  - by user23950

  Is there a template for curriculum vitae in Microsoft Word 2010?

  Read the article

• Howt to grant network access to LocalSystem account?

  - by Ian Boyd

  How do you grant access to network resources of the LocalSystem (NT AUTHORITY\SYSTEM) account? When accessing the network, the LocalSystem account acts as the computer on the network: ...and acts as the computer on the network. Or to say the same thing again: The LocalSystem account acts as the computer on the network: When a service runs under the LocalSystem account on a computer that is a domain member, the service has whatever network access is granted to the computer account, or to any groups of which the computer account is a member. How does one grant a "computer" access to a shared folder and files? Note: Computer accounts typically have few privileges and do not belong to groups. So how would i grant a computer access to one of my shares; considering that "Everyone" already has access? Note: workgroup

  Read the article

• Filesystem access through web interface

  - by Jorge Suárez de Lis

  I have an SSH+Samba server so people can access its files from anywhere on the network. I thought it would be also interesting to provide access through a web interface, so they can access the files even when they don't have access to the VPN or a Samba/SSH client. Something like the Ubuntu One or Dropbox web interface. The http server could be on the same machine as the SSH+Samba, so it should just provide access to local files and some way to login with their username/password. Someone knows any software like this?

  Read the article

• Connect to MS Sql 2008 on local VM

  - by Campo

  I have a test machine. Server 2008 with Hyper V MSSQL 2008 Enterprise Lets call it MACHINE A on the VM it is as well Server 2008 with another MSSQL 2008 Ent Call it VM B I setup a DB on MACHINE A then backed it up and restored following the prepare database for mirroring instructions on MSDN onto VM B. I used to be able to connect to the VM B Instance from the main test server (MACHINE A) but now I cannot for some reason. It cannot seem to find the instance at all even when I browse network databases. I can ping the VM from any computer on the network and access its shares so I know it is discoverable. Just the end of a long day maybe I am missing something here.

  Read the article

• Cannot start `Routing and Remote Access Service` and it's dependencies

  - by ahmadali shafiee

  I tried to start Routing and Remote Access Service but I've got an error says the dependency service or group failed to start then I tried to start Remote Access Connection Manager (one of RRAS's dependencies) and the error way same. then I tried to start The Secure Socket Tuning Protocol Service but there was an error says that the the service started then stopped! the errors form event log is here: The Remote Access Connection Manager service depends on the Secure Socket Tunneling Protocol Service service which failed to start because of the following error: The operation completed successfully. The Secure Socket Tunneling Protocol Service service entered the stopped state. The Routing and Remote Access service depends on the Remote Access Connection Manager service which failed to start because of the following error: The dependency service or group failed to start. sort by date Does anyone know how can I resolve the problem?

  Read the article

• Can't access shared drive when connecting over VPN

  - by evolvd

  I can ping all network devices but it doesn't seem that DNS is resolving their hostnames. ipconfig/ all is showing that I am pointing to the correct dns server. I can "ping "dnsname"" and it will resolve but it wont resolve any other names. Split tunnel is set up so outside DNS is resolving fine So one issue might be DNS but I have the IP address of the server share so I figure I could just get to it that way. example: \10.0.0.1\ well I can't get to it that way either and I get "the specified network name is no longer available" I can ping it but I can't open the share. Below is the ASA config : ASA Version 8.2(1) ! hostname KG-ASA domain-name example.com names ! interface Vlan1 nameif inside security-level 100 ip address 10.0.0.253 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address dhcp setroute ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! ftp mode passive clock timezone EST -5 clock summer-time EDT recurring dns domain-lookup outside dns server-group DefaultDNS name-server 10.0.0.101 domain-name blah.com access-list OUTSIDE_IN extended permit tcp any host 10.0.0.253 eq 10000 access-list OUTSIDE_IN extended permit tcp any host 10.0.0.253 eq 8333 access-list OUTSIDE_IN extended permit tcp any host 10.0.0.253 eq 902 access-list SPLIT-TUNNEL-VPN standard permit 10.0.0.0 255.0.0.0 access-list NONAT extended permit ip 10.0.0.0 255.255.255.0 10.0.1.0 255.255.255.0 pager lines 24 logging asdm informational mtu inside 1500 mtu outside 1500 ip local pool IPSECVPN-POOL 10.0.1.2-10.0.1.50 mask 255.255.255.0 icmp unreachable rate-limit 1 burst-size 1 asdm image disk0:/asdm-621.bin no asdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 0 access-list NONAT nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) tcp interface 10000 10.0.0.101 10000 netmask 255.255.255.255 static (inside,outside) tcp interface 8333 10.0.0.101 8333 netmask 255.255.255.255 static (inside,outside) tcp interface 902 10.0.0.101 902 netmask 255.255.255.255 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 dynamic-access-policy-record DfltAccessPolicy aaa authentication enable console LOCAL aaa authentication http console LOCAL aaa authentication serial console LOCAL aaa authentication ssh console LOCAL aaa authentication telnet console LOCAL http server enable http 10.0.0.0 255.255.0.0 inside http 0.0.0.0 0.0.0.0 outside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set myset esp-aes esp-sha-hmac crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 crypto dynamic-map dynmap 1 set transform-set myset crypto dynamic-map dynmap 1 set reverse-route crypto map IPSEC-MAP 65535 ipsec-isakmp dynamic dynmap crypto map IPSEC-MAP interface outside crypto isakmp enable outside crypto isakmp policy 10 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 crypto isakmp policy 65535 authentication pre-share encryption aes hash sha group 2 lifetime 86400 telnet 0.0.0.0 0.0.0.0 inside telnet timeout 5 ssh 0.0.0.0 0.0.0.0 inside ssh 70.60.228.0 255.255.255.0 outside ssh 74.102.150.0 255.255.254.0 outside ssh 74.122.164.0 255.255.252.0 outside ssh timeout 5 console timeout 0 dhcpd dns 10.0.0.101 dhcpd lease 7200 dhcpd domain blah.com ! dhcpd address 10.0.0.110-10.0.0.170 inside dhcpd enable inside ! threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept ntp server 63.111.165.21 webvpn enable outside svc image disk0:/anyconnect-win-2.4.1012-k9.pkg 1 svc enable group-policy EASYVPN internal group-policy EASYVPN attributes dns-server value 10.0.0.101 vpn-tunnel-protocol IPSec l2tp-ipsec svc webvpn split-tunnel-policy tunnelspecified split-tunnel-network-list value SPLIT-TUNNEL-VPN ! tunnel-group client type remote-access tunnel-group client general-attributes address-pool (inside) IPSECVPN-POOL address-pool IPSECVPN-POOL default-group-policy EASYVPN dhcp-server 10.0.0.253 tunnel-group client ipsec-attributes pre-shared-key * tunnel-group CLIENTVPN type ipsec-l2l tunnel-group CLIENTVPN ipsec-attributes pre-shared-key * ! class-map inspection_default match default-inspection-traffic ! ! policy-map global_policy class inspection_default inspect icmp ! service-policy global_policy global prompt hostname context I'm not sure where I should go next with troubleshooting nslookup result: Default Server: blahname.blah.lan Address: 10.0.0.101

  Read the article

• SharePoint site access request denied permissions

  - by Nat

  Here is a good catch-22. When a user without any permissions on a site requests access from the _layouts/AccessDenied.aspx page it takes them to the Request Access page (_layouts/ecm_reqacc.aspx). When the user fills out the form with a simple message it is supposed to send an email to the address specified in the site collection and take them to _layouts/confirmation.aspx. Unfortunately the users are getting another access denied error instead. I have tried going to _layouts/accessdenied.aspx on a site I am the administrator of and the email is sent fine, so it is not a problem with sending the emails. What should I check and/or give access to in order for authenticated, but not permissioned users the ability to send access requests?

  Read the article

• Cannot access to any Windows share including localhost

  - by user21936

  I can't access any share from my operating system, including \\localhost and \\127.0.0.1. I have Windows 7. NetBIOS over IP is enabled, other computers in the network can access my shares and other computer's shares, but my operating system cannot access any share. I have installed Windows XP within VMware, and the virtual Windows XP can access all shares including the host shares. I can communicate in other ways like TCP, HTTP and gaming, but not access shares. How to solve this problem?

  Read the article

• how to restrict wampserver access to certain ip addresses

  - by user28233

  What do I need to do in order to restrict the access to my wamp server to certain ip addresses. Just imagine that the my ip address is the ip address that I only want to have access I tried to edit the .htaccess # This folder does not require access over HTTP # (the following directive denies access by default) Order allow,deny Allow from 112.203.229.44 and the phpmyadmin.conf: Alias /phpmyadmin "E:/wamp/apps/phpmyadmin3.2.0.1/" # to give access to phpmyadmin from outside # replace the lines # # Order Deny,Allow # Deny from all # Allow from my ip address # # by # # Order Allow,Deny # Allow from my ip address # <Directory "E:/wamp/apps/phpmyadmin3.2.0.1/"> Options Indexes FollowSymLinks MultiViews AllowOverride all Order Deny,Allow Deny from all Allow from my ip address </Directory>

  Read the article

• SSH Access Denied despite correct credentials being used

  - by columbo

  Hello, I have a remote CentOS server to which I had SSH access to. Today when I try to log in via SSH I just get Access Denied even though I am using the correct credentials. I have plesk 9 access and so have reset the admin password and tried to SSH using that password but to no avail. I even created a new user with SSH access rights and tried to log in as them but again failed with the same access denied. I have rebooted. Can anyone offer any advice? There is no file manager in plesk other than for the web domains so I can't get at any system files to see what is going on. Any advice appreciated.

  Read the article

• team foundation server 2010 installation from DVD - I get agent installation instead!

  - by Avi

  GRRRRRRRRRRRR!(#Y%)@#!! They bragged they now have a very easy installation! I don't get it. I entered the MSDN "Disk 5000: Developer Tools" DVD, opened default.htm, clicked on the "Visual Studio Team Foundation Server 2010" link. The VSTFS2010 folder open. I click autorun.exe. And then I get "Microsoft Visual Studio Agents 2010 Setup". I don't get it. Why "agents"? I wanted to instal a server!

  Read the article

• Samba file shares - ownership of folder accessible for 1 group verified by MS active direcctory

  - by jackweirdy

  I have a machine set up to share a folder /srv/sambashare, here's an exerpt of the config file: [share] path = /srv/sambashare writable = yes The permissions of that folder are set at 700 and it is owned by nobody:nogroup at the moment. The problem I face is probably a simple one but I'm fairly new to Samba so I'm not sure what to do. The contents of the share should be accessible to a particular user who will authenticate with domain credentials, checked against Active Directory by kerberos. I haven't got kerberos configured yet as I wanted to test the share as soon as samba was configured, albeit basically, to ensure that it works. I've noticed that I can only access & write to the share when the folder is either owned by the user logging in or made world writable. The key issues are that this folder can't be world writable as it contains sensitive stuff, but at the same time can't be owned by a user or group since they come from the AD server. Anyone know what I should do?

  Read the article

• Lost support for Web Access on Verizon BlackBerry World Edition

  - by Jimsmithkka

  Hello all, I believe that some silliness has occurred with my blackberry after a OS upgrade. I have 2010 Blackberry world edition phone, purchased off a friend who went iPhone, that at first worked with web on the Verizon network. When i connected it to my PC to transfer contacts, it prompted for an OS upgrade, which I performed. Post-Upgrade I have found that i can no longer access any of the web services: eg. AppWorld, Email, Twitter, Browser. And they all state that i need to upgrade my account to gain access. I had a Storm previous to this that worked fine, and at the VZ store they told me this device is no longer supported (new in 2010 though), and they got me a free "upgrade" to the Blackberry flip. What i could use help with is finding a source stating it is discontinued or a guide that will help me re-enable the web features. I can provide further info later if needed (currently at work with the flip, the WorldEdition is at home).

  Read the article

• Cannot access to any windows share including localhost

  - by user21936

  I can't access any share from my operating system, including \\localhost and \\127.0.0.1. I have Windows 7. NetBIOS over IP is enabled, other computers in the network can access my shares and other computer's shares, but my operating system cannot access any share. I have installed Windows XP within VMware, and the virtual windows xp can access all shares including the host shares. I can communicate in other ways like TCP, HTTP and gaming, but not access shares. How to solve this problem?

  Read the article

• Confused with creating an ODBC connection, apparently I have two separate odbcad32.exe files?

  - by Hoser

  Alright, this is my first time working with this so forgive me if I'm a little confusing or vague. I have a server with Windows Server 2008 Standard without Hyper-v (6.0, Build 6002). I'm running a small website off this server and using a Microsoft Access database to store some information coming in through the website. I'm sure the PHP I have written to open the ODBC connection is correct as it has worked for me when I created this website in a testing environment on a laptop. My current issue now is that it seems like I have two different odbcad32.exe's, and one doesn't appear to have a driver for a .accdb file, and only a .mdb file. The other has a driver for both. The first one I speak of has a driver titled 'Driver do Microsoft Access (.mdb)', the second one has a driver titled 'Microsoft Access Driver (.mdb, .accdb)'. I access the first odbcad32.exe by going to C:\Windows\SysWOW64\odbcad32.exe, and then the one that seems to have the driver I need I go to Control Panel-Administrative Tools-Data Sources(ODBC) and simply create a new connection in the System DNS tab. Whenever I make changes to the one that I access through the Control Panel, I see no changes, however if I use the odbcad32.exe file in SysWOW64 I do get some changes in the errors that come back to me. The main difference I noticed is that when I set up an ODBC connection with the Control Panel method it said it simply couldn't find the ODBC connection, but when I made a .mdb connection in the SysWOW64 one (and pointed it to a .accdb file) it says Cannot open database '(unknown)'. It may not be a database that your application recognizes, or the file may be corrupt. Which makes it seem like it is this odbcad32.exe version in SySWOW64 that is being recognized as the 'correct' one. Is there any way to fix this? I've tried to be as thorough as possible but if I've been confusing or left anything out let me know.

  Read the article

• Blacklist a single access point of a wireless network

  - by Zr40

  At my university, one of the wireless access points is failing. When something tries to associate to the network using that access point, it deassociates the client, claiming 802.1X authentication failure. Other access points do work normally using the same credentials. The issue has been reported, but after a month it still has still not been fixed. Now, I'm looking for a way to blacklist the access point's BSSID, so the OS prefers other access points on the same SSID. How can I blacklist specific BSSIDs in either Mac OS X Snow Leopard or Windows 7?

  Read the article

• SSO to multiple websites from Sharepoint website

  - by Aico

  We have an intranet based on Sharepoint 2010. In this intranet we have several links to other webservers within the same Active Directory, for example a link to our Outlook Web Access site on our Exchange 2010 environment. We have three different setups which visit this Sharepoint environment and the other webservers: Windows 7 clients that are a member of the Active Directory Home pc's that connect through a SSL VPN appliance Standalone thin clients (Windows 7 embedded) within the corporate network The goal is to let people only sign in once. In the first group this isn't a problem because the AD Integrated Authentication works fine and the Windows logon is passed on to Sharepoint and the other webservers. The second group is also working fine because of the LDAP integration that the SSL VPN appliance uses. The third group is however experiencing issues. They need to enter their credentials everytime they click a link to another webserver. They first need to enter credentials for accessing the Sharepoint environment. When clicking the link for their webmail they have to re-enter their credentials, and so on. Can someone tell me what the best solution would be to also get SSO working fine for the third group? Some extra information: We also have a Forefront TMG server in our environment. I read somewhere that Forefront might be part of a solution for this problem, but not sure how. Maybe someone here can help me? Look forward to some help. Best regards, Aico

  Read the article

• Should I manage authentication on my own if the alternative is very low in usability and I am already managing roles?

  - by rumtscho

  As a small in-house dev department, we only have experience with developing applications for our intranet. We use the existing Active Directory for user account management. It contains the accounts of all company employees and many (but not all) of the business partners we have a cooperation with. Now, the top management wants a technology exchange application, and I am the lead dev on the new project. Basically, it is a database containing our know-how, with a web frontend. Our employees, our cooperating business partners, and people who wish to become our cooperating business partners should have access to it and see what technologies we have, so they can trade for them with the department which owns them. The technologies are not patented, but very valuable to competitors, so the department bosses are paranoid about somebody unauthorized gaining access to their technology description. This constraint necessitates a nightmarishly complicated multi-dimensional RBAC-hybrid model. As the Active Directory doesn't even contain all the information needed to infer the roles I use, I will have to manage roles plus per-technology per-user granted access exceptions within my system. The current plan is to use Active Directory for authentication. This will result in a multi-hour registration process for our business partners where the database owner has to manually create logins in our Active Directory and send them credentials. If I manage the logins in my own system, we could improve the usability a lot, for example by letting people have an active (but unprivileged) account as soon as they register. It seems to me that, after I am having a users table in the DB anyway (and managing ugly details like storing historical user IDs so that recycled user IDs within the Active Directory don't unexpectedly get rights to view someone's technologies), the additional complexity from implementing authentication functionality will be minimal. Therefore, I am starting to lean towards doing my own user login management and forgetting the AD altogether. On the other hand, I see some reasons to stay with Active Directory. First, the conventional wisdom I have heard from experienced programmers is to not do your own user management if you can avoid it. Second, we have code I can reuse for connection to the active directory, while I would have to code the authentication if done in-system (and my boss has clearly stated that getting the project delivered on time has much higher priority than delivering a system with high usability). Third, I am not a very experienced developer (this is my first lead position) and have never done user management before, so I am afraid that I am overlooking some important reasons to use the AD, or that I am underestimating the amount of work left to do my own authentication. I would like to know if there are more reasons to go with the AD authentication mechanism. Specifically, if I want to do my own authentication, what would I have to implement besides a secure connection for the login screen (which I would need anyway even if I am only transporting the pw to the AD), lookup of a password hash and a mechanism for password recovery (which will probably include manual identity verification, so no need for complex mTAN-like solutions)? And, if you have experience with such security-critical systems, which one would you use and why?

  Read the article

• How do you fix an SVN 409 Conflict Error

  - by NerdStarGamer

  I used to use SVN 1.4 on OS X Leopard and everything was fine. A couple of weeks ago I installed a fresh copy of OS X 10.6. The version of SVN that comes with Snow Leopard is 1.6.5. I went ahead and built my own copy with 1.6.6. I'm using the built in apache server and just hosting repositories locally. Everything appeared to work fine until I actually tried to commit something. Everytime I try to commit a change, I get the following message: Transmitting file data .svn: Commit failed (details follow): svn: MERGE of '/svn/svn2': 409 Conflict (http://localhost) This happens with my old repositories, so I created a couple of new ones. Same deal. I also tried using the 1.6.5 version that comes with the system...same. Finally, I tried upgrading to the latest stable SVN (1.6.9) and still got the same problem. The Apache error logs the following for each failed commit: [Mon Mar 29 19:53:10 2010] [error] [client ::1] Could not MERGE resource "/svn/svn2/!svn/act/d399326f-c20f-424f-bb68-3bb40503b5b1" into "/svn/svn2". [409, #0] [Mon Mar 29 19:53:10 2010] [error] [client ::1] An error occurred while committing the transaction. [409, #2] [Mon Mar 29 19:53:10 2010] [error] [client ::1] Can't open directory '/usr/local/svn/svn2/db/transactions/5-6.txn/\xeb\xa9\x0f\x1f': No such file or directory [409, #2] [Mon Mar 29 19:53:11 2010] [error] [client ::1] Could not DELETE /svn/svn2/!svn/act/d399326f-c20f-424f-bb68-3bb40503b5b1. [500, #0] [Mon Mar 29 19:53:11 2010] [error] [client ::1] could not open transaction. [500, #2] [Mon Mar 29 19:53:11 2010] [error] [client ::1] Can't open file '/usr/local/svn/svn2/db/transactions/5-6.txn/props': No such file or directory [500, #2] And from the access log: ::1 - - [30/Mar/2010:13:02:20 -0400] "OPTIONS /svn/svn2 HTTP/1.1" 401 401 ::1 - user [30/Mar/2010:13:02:20 -0400] "OPTIONS /svn/svn2 HTTP/1.1" 200 188 ::1 - user [30/Mar/2010:13:02:20 -0400] "PROPFIND /svn/svn2 HTTP/1.1" 207 647 ::1 - user [30/Mar/2010:13:02:20 -0400] "PROPFIND /svn/svn2 HTTP/1.1" 207 647 ::1 - user [30/Mar/2010:13:02:20 -0400] "PROPFIND /svn/svn2/!svn/vcc/default HTTP/1.1" 207 398 ::1 - user [30/Mar/2010:13:02:20 -0400] "PROPFIND /svn/svn2/!svn/bln/6 HTTP/1.1" 207 449 ::1 - user [30/Mar/2010:13:02:20 -0400] "REPORT /svn/svn2/!svn/vcc/default HTTP/1.1" 200 1172 Curiously, the commit does actually commit the changes, but the working copy doesn't see that and everything gets screwy. I've tried to Google every variation I can think of for this problem, but the search results are pretty much useless. I'm not using TortoiseSVN or anything special and commits fail on a new repository, so I know it's not a problem with my old repos. Any help would be greatly appreciated.

  Read the article

• Oracle JDBC connection exception in Solaris but not Windows?

  - by lupefiasco

  I have some Java code that connects to an Oracle database using DriverManager.getConnection(). It works just fine on my Windows XP machine. However, when running the same code on a Solaris machine, I get the following exception. Both machines can reach the database machine on the network. I have included the Oracle trace logs. Mar 23, 2010 12:12:33 PM org.apache.commons.configuration.ConfigurationUtils locate FINE: ConfigurationUtils.locate(): base is /users/theUser/ADCompare, name is props.txt Mar 23, 2010 12:12:33 PM org.apache.commons.configuration.ConfigurationUtils locate FINE: Loading configuration from the path /users/theUser/ADCompare/props.txt Mar 23, 2010 12:12:33 PM oracle.jdbc.driver.OracleDriver connect FINE: OracleDriver.connect(url=jdbc:oracle:thin:@//theServer:1521/theService, info) Mar 23, 2010 12:12:33 PM oracle.jdbc.driver.OracleDriver connect FINER: OracleDriver.connect() walletLocation:(null) Mar 23, 2010 12:12:33 PM oracle.jdbc.driver.OracleDriver parseUrl FINER: OracleDriver.parseUrl(url=jdbc:oracle:thin:@//theServer:1521/theService) Mar 23, 2010 12:12:33 PM oracle.jdbc.driver.OracleDriver parseUrl FINER: sub_sub_index=12, end=46, next_colon_index=16, user=17, slash=18, at_sign=17 Mar 23, 2010 12:12:33 PM oracle.jdbc.driver.OracleDriver parseUrl FINER: OracleDriver.parseUrl(url):return Mar 23, 2010 12:12:33 PM oracle.jdbc.driver.OracleDriver connect FINER: user=theUser, password=******, database=//theServer:1521/theService, protocol=thin, prefetch=null, batch=null, accumulate batch result =true, remarks=null, synonyms=null Mar 23, 2010 12:12:33 PM oracle.jdbc.driver.PhysicalConnection <init> FINE: PhysicalConnection.PhysicalConnection(ur="jdbc:oracle:thin:@//theServer:1521/theService", us="theUser", p="******", db="//theServer:1521/theService", info) Mar 23, 2010 12:12:33 PM oracle.jdbc.driver.PhysicalConnection <init> FINEST: PhysicalConnection.PhysicalConnection() : connectionProperties={user=theUser, password=******, protocol=thin} Mar 23, 2010 12:12:33 PM oracle.jdbc.driver.PhysicalConnection initialize FINE: PhysicalConnection.initialize(ur="jdbc:oracle:thin:@//theServer:1521/theService", us="theUser", access) Mar 23, 2010 12:12:33 PM oracle.jdbc.driver.PhysicalConnection initialize FINE: PhysicalConnection.initialize(ur, us):return Mar 23, 2010 12:12:33 PM oracle.jdbc.driver.PhysicalConnection needLine FINE: PhysicalConnection.needLine()--no return java.lang.ArrayIndexOutOfBoundsException: 31 at oracle.net.nl.NVTokens.parseTokens(Unknown Source) at oracle.net.nl.NVFactory.createNVPair(Unknown Source) at oracle.net.nl.NLParamParser.addNLPListElement(Unknown Source) at oracle.net.nl.NLParamParser.initializeNlpa(Unknown Source) at oracle.net.nl.NLParamParser.<init>(Unknown Source) at oracle.net.resolver.TNSNamesNamingAdapter.loadFile(Unknown Source) at oracle.net.resolver.TNSNamesNamingAdapter.checkAndReload(Unknown Source) at oracle.net.resolver.TNSNamesNamingAdapter.resolve(Unknown Source) at oracle.net.resolver.NameResolver.resolveName(Unknown Source) at oracle.net.resolver.AddrResolution.resolveAndExecute(Unknown Source) at oracle.net.ns.NSProtocol.establishConnection(Unknown Source) at oracle.net.ns.NSProtocol.connect(Unknown Source) at oracle.jdbc.driver.T4CConnection.connect(T4CConnection.java:1037) at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:282) at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:468) at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:165) at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:35) at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:839) at java.sql.DriverManager.getConnection(DriverManager.java:582) at java.sql.DriverManager.getConnection(DriverManager.java:185) The above exception is also thrown if I use OracleDataSource instead of the generic DriverManager.getConnection(). Any ideas on why the behavior is different in the different environments?

  Read the article

< Previous Page | 276 277 278 279 280 281 282 283 284 285 286 287  | Next Page >