Search Results

Search found 12144 results on 486 pages for 'old'.

Page 281/486 | < Previous Page | 277 278 279 280 281 282 283 284 285 286 287 288  | Next Page >

  • Strange resizing of partition after reinstalling Ubuntu 14.04 64bit

    - by Mike
    I started with Windows 7 on 120GB SSD and Ubuntu 14.04 32bit installed on 60GB partition on separate 1TB HDD. I just did a fresh reinstall of 14.04 64bit on the 1TB HDD. In the installation set up process, I selected the second choice of "deleting Ubuntu 14.04 and all it's files,documents, photos etc and reinstalling" to what I figured would reinstall the 64bit OS on the already existing 60GB allocated partition. Instead, it reinstalled Ubuntu as 43.5 GB and created a separate 15.8 partition. So now it reads that my disk space for Ubuntu ( in settingsdetails) is 43.5GB (instead of the previous 60GB that my old 32bit had) The upside is I can now access my 1TB HDD from my toolbar(and all the files located on it) Before, I could only access that through Windows (I can also access the SSD too, but that was always the case) Both drives are mounted now. My initial reaction was to go into Windows 7 disk management delete the strange/new 15gb partitionextend the 43.5 to the unallocated space. But I'm not sure if this is necessary or would even work. My question is why did it create a 15gb partition shrinking my ubuntu disk space, and is it useful? I don't want wasted space, so before I go through all my set up of Ubuntu, should I change this. At this time my HDD reads as 43.5 partiton, 15.8 partition, and 874GB exfat32 (939GB total)

    Read the article

  • Ubuntu 12.04 64 bit "unable to find medium with live filesystem" AFTER normal install

    - by user88710
    So, I got a new computer (64 bit quad core yada yada). pulled my Ubuntu SSD drive from old machine, installed it into new machine. (my intention here is to have Ubuntu installed on the 120G SSD, Win7 on the main drive) downloaded 64 bit Ubuntu, burned it to a disk. rebooted with Live CD, installed Ubuntu to the SSD drive, had no problems rebooted again, got the grub menu, selected Ubuntu after a minute i got this - "unable to find medium with live filesystem" booting into windows, explorer doesnt even see the SSD. Device manager sees it though. I assume this is because its formatted with ext4. so, The liveCD saw the SSD just fine, installed fine, but when i try to boot ubuntu, i get the error above, heeellllpppp! UPDATE: small update. Windows did a software update that apparently wiped out my grub, so I guess grub was installed on the main drive. I reinstalled Ubuntu (again) on the SSD drive but, still no joy with booting from it. same error message as above.

    Read the article

  • Cursor seems to freeze in the first attempt of typing - Unity 3D, 12.04

    - by Denis
    It happens in the first attempt of typing, no matter is after the startup, or 5 minutes later, or then after. The cursor (or maybe it's the system) seems to freeze, no matter the application I use, taking up 5 sec to appear what is typed. Subsequently, everything is normal, using another applications. @Anwar Shah suggested it could be a daemon waiting to run before the lauching of the first application. Turning off Zeitgest didn't help. It occurs only with Unity-3d. Tested with Unity-2d, everything is fine. Tried to change some Compiz settings, nothing worked, although not tested with every single parameter. Also I deactivated Ati proprietary driver, no effect. My system: AMD E350 1.6Gh, 2G-Ram, ATI graphics - Ubuntu 12.04, 64bits. Update 1: the cursor is blinking normally before I start typing. After the first character (which is not showed), seems to freeze, taking 5 seconds to get normal again. Very annoying, specially when you want to access login sites. Update 2: I tested on a different and old machine (Athlon 64 4800 x2, 4Gb ram, no problems - takes 2 seconds, acceptable. I think it could be related to my specific hardware (Samsung RV415), but not sure about it. Anyone experiencing something similar? Is that what I should expect, or can be fixed or improved? Thanks.

    Read the article

  • How to run multiple distros using lvm

    - by Mark
    I've seen quite a few posts around about running multiple distros but not sure they apply to using LVM (and without Windows). I'm using a machine that's about 3 years old. Setup: Intel Core i7 2.8GHz 8GB Ram 1TB SATA HDD At this point, I'd like to install 12.10 and Mint 14, leaving the option open to install additional distros down the road. I could be way off, but I'm thinking about creating at least 2 primary /boot partitions (1 for 12.10 and 1 for Mint) and another partition for LVM leaving room for additional /boot partitions. Then creating a VG and separate LVs for Ubuntu 12.10 and Linux Mint 14. I understand I can share partitions between the 2 installs, but I'm only using this for testing and I have tons of space to play with. LVM seemed logical considering I may want to install and test additional distros. I guess I could share the /swap partition across the board without problems, right? I'm unclear about GRUB2. How do I handle the bootloader situation? Install 12.10 and get it running then make changes to grub.cfg after installing Mint? And do I not install GRUB for Mint or do I install it in a different location? Any guidance would be appreciated.

    Read the article

  • Unresponsive Script window pops up all the time now. Why and what to do?

    - by Christopher Jewell
    I don't know that it's for the exact same script each time, it may be. A script on this page may be busy, or it may have stopped responding. You can stop the script now, or you can continue to see if the script will complete. Script: chrome://messenger/content/folderPane.js:721 This is in association with Thunderbird I think. This doesn't just happen after I've stepped away for a long time. It happens every time I click on anything. Things keep running that I'm clicking on. Just before this started as a constant problem, I was looking at addons etc, and something in Thunderbird deactivated an old or expired JavaScript. I clicked on the update for that and after a while I found the best choice on the list and clicked download. I don't know that anything happened with that and I moved away from addons etc area. The unresponsive script window started coming back all the time. Every time I clicked on something in Thunderbird and sometimes with Firefox. I turned off Firefox and restarted, but it didn't change. Shut down Firefox and computer restarted didn't change. The unresponsive script window is persistent now.

    Read the article

  • Further question on Intel graphics driver

    - by Thomas Byers
    Ok, Josh answered almost immed.! I need to know specifically, now that I am using Nvidia card effectively, do I need to allow update manager to update the intel gr. drivers? I must add, I believe I know why Update Manager is telling me I need to update those Intel gr. drivers. It probably happened because I tried to update my nvidia drivers and got a buggy install, which let to to a black screen. I shut the system down manually after that and rebooted to a black screen and upon a further reboot I ascertained that I could still dual-boot(windows 7) into the other os. Then I went through the restart process and at the grub2 menu chose other options and it was probably, at that time, that Linux was smart enough to know that nvidia drivers as installed weren't cutting it, and reverted to the onboard Intel graphics system...does that make sense? Anyway, after successfully getting up and running, I reinstalled my old but successful nvidia drivers and all was well again, except now upon running Update Manager, I am offered the Intel graphics driver upgrade each time, which, up til now I have unchecked...my question is now more obvious. Should I accept the Intel driver update and if I do, will it once again override my nvidia drivers?

    Read the article

  • How to add a permanent redirect (301) for an htm file in IIS 7

    - by bconlon
    Looking in Web Analytics I could see several external sites pointing at an old .htm file on my web server that no longer existed, so I thought I would get IIS to redirect to the new .aspx replacement. How hard could it be? This has annoyed me for quite a while today so here is the answer. 1. Install the Http Redirection module - this is not installed by default!! Windows 7 Start->Control Panel->Programs and Features->Turn Windows Features on or off. Internet Information Services->World Wide Web Services->Common Http Features->HTTP Redirection. Windows Server 2008 Start->Administrative Tools->Server Manager. Roles->Web Server (IIS). Role Services->Add Role Services. Common Http Features->HTTP Redirection. 2. Edit your web.config file <configuration>     .....     <location path="oldfile.htm">         <system.webServer>             <httpRedirect enabled="true" destination="/newfile.aspx" exactDestination="true" childOnly="true" httpResponseStatus="Permanent" />         </system.webServer>     </location>     ..... </configuration> When a user clicks or Google crawls ‘oldfile.htm’ it will get a permanent redirect to ‘/newfile.aspx’ - and should take any Page Rank to the new file.  #

    Read the article

  • Why does my VertexDeclaration apparently not contain Position0?

    - by Phil
    I'm trying to get my code from calling each individual draw call down to using at least a VertexBuffer, and preferably an indexBuffer, but now that I'm attempting to test my code, I'm getting the error: The current vertex declaration does not include all the elements required by the current vertex shader. Position0 is missing. Which makes absolutely no sense to me, as my VertexDeclaration is: public readonly static VertexDeclaration VertexDeclaration = new VertexDeclaration( new VertexElement(0, VertexElementFormat.Vector3, VertexElementUsage.Position, 0), new VertexElement(sizeof(float) * 3, VertexElementFormat.Color, VertexElementUsage.Color, 0), new VertexElement(sizeof(float) * 3 + 4, VertexElementFormat.Vector3, VertexElementUsage.Normal, 0) ); Which clearly contains the information. I am attempting to draw with the following lines: VertexBuffer vb = new VertexBuffer(GraphicsDevice, VertexPositionColorNormal.VertexDeclaration, c.VertexList.Count, BufferUsage.WriteOnly); IndexBuffer ib = new IndexBuffer(GraphicsDevice, typeof(int), c.IndexList.Count, BufferUsage.WriteOnly); vb.SetData<VertexPositionColorNormal>(c.VertexList.ToArray()); ib.SetData<int>(c.IndexList.ToArray()); GraphicsDevice.DrawIndexedPrimitives(PrimitiveType.TriangleList, 0, 0, vb.VertexCount, 0, c.IndexList.Count/3); Where c is a Chunk class containing an 8x8x8 array of boxes. Full code is available at https://github.com/mrbaggins/Box/tree/ProperMeshing/box/box. Relevant locations are Chunk.cs (Contains the VertexDeclaration) and Game1.cs (Draw() is in Lines 230-250). Not much else of relevance to this problem anywhere else. Note that large commented sections are from old version of drawing.

    Read the article

  • How can I make an unmounted / unmountable NTFS disk not show up in the nautilus devices area?

    - by Dennis
    I have an idea that my /etc/fstab is a real mish-mash and I don't remember how it got that way, first of all it looks like this UUID=9EB80807B807DD21 /media/Storage ntfs-3g users 0 0 UUID=a60397fd-964a-45b1-ad35-53c8a4bee010 / ext4 defaults 0 1 UUID=1764825d-b8ba-4620-b3b0-e979b6f4f5c4 swap swap sw 0 0 UUID=255DA1E406E29DBC /media/sda2 ntfs-3g defaults 0 0 UUID=2CCCF161CCF1262C /mnt/sda1 ntfs-3g umask=000 0 0 /dev/fd0 /media/floppy0 vfat noauto 0 0 I started with an old XP install on disk /dev/sda that I don't use anymore but didn't want to delete, so I shrunk the XP partition, added a NTFS partition that would be common to both systems (Labeled it "Common" in XP), then installed Lucid on an extended ext4 partition. On this disk of course the ext4 system partition comes up as /, the go between partition auto-mounts on /media/sda1 but shows up in Nautilus as COMMOM, while the XP system disk does not show up in Nautilus, but I can get to it by navigating to /mnt/sda1. A second hard drive (/dev/sdb) that I stuck in was already formatted NTFS with a bunch of stuff and labeled "Storage". It auto-mounts to /media/Storage but another un-mounted disk also shows up in the Nautilus device area called Storage but it can't be mounted (Here and in the "Places" are the only times it appears) I would primarily like this non-existant (or already mounted depending on how you look at it) disk to not show up, but I wouldn't mind an explanation of why one labeled partition auto-mounts to a /media mount point but shows up by label, one does not show up as mounted at all but mounts to a /mnt mount point and is there for navigation, and one is mounted to a directory of the same name as the label. I would love to have some consistancy / direction on what is proper in this circumstance. No doubt I caused this with the fstab but I really don't remember what my rational was if I edited it manually

    Read the article

  • .NET and SMTP Configuration

    - by koevoeter
    Sometimes I feel stupid about discovering .NET features that have been there since an old release (2.0 in this case)... Apparently you can just use this configSecion “mailSettings” and never have to configure your SmtpClient instance in code again (no, not hard-coded): <system.net>     <mailSettings>         <smtp deliveryMethod="Network" from="My Display Name &lt;[email protected]&gt;">             <network host="mail.server.com" />         </smtp>     </mailSettings> </system.net> Now you can go all like: new SmtpClient().Send(mailMessage); …and everything is configured for you, even the from address (which you can obviously override).

    Read the article

  • Touchpad stopped working on an Acer AspireOne D255E

    - by Gustavo
    I have a less than a year old Acer AspireOne D255E with a fresh install of Ubuntu 11.10. Everything has been working fine. Great OS and great netbook. But today the touchpad stopped working. It had been working fine. I closed the netbook and when I opened it again, a couple of hours later, I could not move the pointer with the touchpad. I can not get the pointer to move. I cleaned the touchpad surface well, just in case. Everything else is working fine. All the software updates are up-to-date. I have rebooted several times with no solution. I have attached an USB mouse and the pointer works well. What can I do to troubleshoot the problem? I have gone to the System Settings, touchpad section, and there is not much that I can do there. I would like to determine first if it is a hardware or software issue and then how to resolve it. Is there a way that I can reinstall the touchpad drivers. just in case it is a software problem? I have been using Ubuntu for nearly a year now and am very happy with it. Are there any wise Ubuntu gurus out there who can help me? Thank you for reading this note.

    Read the article

  • When writing tests for a Wordpress plugin, should i run them inside wordpress or in a normal browser?

    - by Nicola Peluchetti
    I have started using BDD for a wordpress plugin i'm working on and i'm rewriting the js codebase to do tests. I've encountered a few problems but i'm going steady now, i was wondering if i had the right approach, because i'm writing test that should pass in a normal browser environment and not inside wordpress. I choose to do this because i want my plugin to be totally indipendent from the wordpress environment, i'm using requirejs in a way that i don't expose any globals and i'm loading my version of jQuery that doesn't override the one that ships with Wordpress. In this way my plugin would work the same on every wordpress version and my code would not break if they cheange the jQuery version or someone use my plugin on an old wordpress version. I wonder if this is the right approach or if i should always test inside the environment i'm working in. Since wordpress implies some globals i had to write some function purely for testing purpose, like "get_ajax_url": function() { if( typeof window.ajaxurl === "undefined" ) { return "http://localhost/wordpress/wp-admin/admin-ajax.php"; } else { return window.ajaxurl; } }, but apart from that i got everything working right. What do you think?

    Read the article

  • Cocos2d v2.0 and OpenGL 2.0/1.0: where to start

    - by mm24
    I started developing my very first game 3 months ago using Cocos2d 2.0 for iPhone. I am now in the stage where I'd like to add some cool effects to the bullets and some special weapons (see my waveforms question here). I got a good answer in the cocos2d-iphone forum (see this one). Unfortunately I am a bit paralized now. I don't know if I will be overdoing by learning OpengGL 2.0 or if I should just stick ot the old 1.0. There is a good intro on various tutorial's written in Steffen Itterheims blog (see this post). I would like to add to my game: a blur effect to the bullets (here is a tutorial for OpenGL 1.0) a waveform (see above) some realistic water ripples (here is a nice sample code) So now, given that I don't want to overdo things but at the same time I want to achieve those effects, from where should I start? Should I discard the OpenGL 1.0 tutorials? OR should I use only OpenGL 1.0 code? How can I avoid confusion? I mean, it seems that the compiler recognizes both, but that there are some conflictual calls in some circumnstances, I am fairly sure this has some explanation, is there some reference to this somewhere?

    Read the article

  • Ubuntu 13.04 to 13.10: Filesystem check or mount failed

    - by SamHuckaby
    I attempted to upgrade from Ubuntu 13.04 to 13.10 today, and mid upgrade the system started flaking out, and eventually locked up entirely. I was forced to restart the computer, and am now unable to get the computer to boot up at all. When I boot currently, it takes me to the GRUB menu, and I can choose to boot normally, or boot in an older version. I have tried several things, which I list below, but no matter what, when I try to finish booting into Ubuntu, I receive the following error: Filesystem check or mount failed. A maintenance shell will now be started. CONTROL-D will terminate this shell and continue booting after re-trying filesystems. Any further errors will be ignored root@ubuntu-computername:~# I have fun fsck -f and everything appears correct, no errors are reported. and it passes all 5 checks. If I run fdisk -l then I get the following information: Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 4096 bytes / 4096 bytes Disk identifier: 0x00010824 Device Boot Start End Blocks Id System /dev/sda1 * 2048 608456703 304227328 83 Linux /dev/sda2 608458750 625141759 8341505 5 Extended Partition 2 does not start on physical sector boundary. /dev/sda5 608458752 625141759 8341504 82 Linux swap / Solaris Disk /dev/sdb: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x0fb4b7e8 Device Boot Start End Blocks Id System /dev/sdb1 8192 625139711 312565760 7 HPFS/NTFS/exFAT I am considering just installing a new OS on the other disk, that currently has nothing on it, and then just attempting to scrape my data off the old disk (thankfully I didn't encrypt the files). Really my question is this: Can I salvage this Ubuntu install, or should I give up and just reinstall?

    Read the article

  • wireless card not detected

    - by user281219
    i have a old HP Compaq NX6125 with a new lunbuntu 14.04 32 bits install , but the wireless card is not working I have already done this steps and the wireless leds on the laptop are on but can't see any where the wireless interface , cloud`t do the last two steps . sudo apt-get remove bcmwl-kernel-source sudo apt-get install firmware-b43-installer b43-fwcutter Then Reboot And you need to activate the card from settings/network/wireless make it ON After this search for wireless icon at the task bar and look for your wifi. lshw -class network: *-network:0 description: Ethernet interface product: NetXtreme BCM5788 Gigabit Ethernet vendor: Broadcom Corporation physical id: 1 bus info: pci@0000:02:01.0 logical name: eth0 version: 03 serial: 00:0f:b0:f7:d1:0f size: 100Mbit/s capacity: 1Gbit/s width: 32 bits clock: 66MHz capabilities: pm vpd msi bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.134 duplex=full firmware=5788-v3.26 ip=192.168.1.120 latency=64 link=yes mingnt=64 multicast=yes port=twisted pair speed=100Mbit/s resources: irq:23 memory:d0000000-d000ffff *-network:1 description: Network controller product: BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller vendor: Broadcom Corporation physical id: 2 bus info: pci@0000:02:02.0 version: 02 width: 32 bits clock: 33MHz capabilities: bus_master configuration: driver=b43-pci-bridge latency=64 resources: irq:22 memory:d0010000-d0011fff *-network description: Wireless interface physical id: 1 logical name: wlan2 serial: 00:14:a5:77:9e:10 capabilities: ethernet physical wireless configuration: broadcast=yes driver=b43 driverversion=3.13.0-29-generic firmware=666.2 link=no multicast=yes wireless=IEEE 802.11bg

    Read the article

  • Office arangement - comfort vs. teamwork?

    - by finrod
    Our team works in an open-space office. Luckily the cubicles are quite big (L shaped tables for everyone!), there is quite a lot of space so we are not sandwiched. Without going into further detail, there are comfortable spots (window), normal spots and stupid spots (near the corridor). Until recently, the development team of twelve engineers was seated so that all types of spots were occupied and we were all close together. In the old arrangement, verbal communication was very easy - half of the team was withing talking distance. The other half was like ten steps away. Often times I could ask, discuss, solve problems without leaving the cube. Most of the communication is work related, no bullshit or mental masturbation that would unnecessarily distract others. Now we have moved to another part of the building and have larger space to occupy. At this point, everyone could pick their spot. Naturally all stupid spots are left empty (for the poor newcomers to occupy bwehaha). In the new arrangement, the development team is stretched across the floor and some of the key engineers are seated 'far' from each other - definitely not within talking distance. I have yet to experience how this works out but am getting concerned that team work and communication may have been traded for personal comfort. Finally the questions... What do you think is better office arrangement? Such that allows for free verbal communication but trading for some developer's comfort, or such that potentially hinders verbal communication but makes developer's more comfortable in their spot? Or maybe it does not matter at all and we will evolve to be efficient in any arrangement? What is your personal experience? Note - yes I read books and posts how workplace is important in our job. However in this case - we are all still in open space and the difference between the different spots are not really groundbreaking. So I'm thinking the little comfort that few developers gain is not worth the loss of easy communication.

    Read the article

  • How to cover the widest range of computers when publishing?

    - by DevilWithin
    When you plan a game, or even when you already made a game, and its time to publish, you wonder how much of your audience is covered by the game technology demands. I'm directing this essentialy to casual games, as I constantly see people having old laptops and being unable to replace them. Laptops with integrated cards whose OpenGL version doesn't even support textures larger than 1024x1024. These people may be avid gamers as well, and a reasonable share of the audience to consider giving them the chance to play casual games, once they cannot play any blockbusters. As I've seen happening, a very "noticeable" example is Angry Birds. It's gameplay is merely casual (I think nobody disagrees here) and still, it uses so high resolution textures that at least OpenGL 2.0 or around is needed, which blocks away a lot of people. So, the actual question is: what is a good tradeoff for this issue? Would it be better to just sacrifice the texture resolution for everyone, but have more supported hardware? Would it be better to keep the high quality and just slice the textures into smaller ones, sacrificing the performance a little bit? What else? Any ideas about this topic are welcome for discussion.

    Read the article

  • Ubuntu 12.04 using b43-fwcutter

    - by Nathan
    I have used 10.04 with the b43-fwcutter driver to drive my BCM4318 Broadcom card (a Linksys WPC54G v3) on my old Dell Inspiron 8100 for two years+ with no troubles. I just upgraded to 12.04 and although everything worked fine after install, before I added the b43-fwcutter driver, once I installed the driver, the system refuses to boot. Even before I install the Linksys card!! It just hangs on boot with graphical garbage on the screen. I tried several attempts to recover the system using the live CD, and finally reinstalled completely. I have been thru the cycle, install fresh system, verify everything works, then install b43-fwcutter and it is hung, several times. Consistent hard fail. The system runs fine on hardwire Ethernet, and wireless was fine on 10.04. But I cannot get there with 12.04. So after several attempts, I am now ready to admit defeat and ask for help. I have read every thread that search turned up, and either the advice is to do what I did, i.e. install fwcutter, or does not apply (Different Broadcom, STA, legacy, whatever) So what do I need to do to fix it? Or is the B43-fwcutter driver broken for 12.04? Thoughts? Tips? Log files needed??

    Read the article

  • dpkg reporting as installed, uninstalled kernels

    - by Tony Martin
    I have run the following command to remove old kernels: dpkg -l 'linux-*' | sed '/^ii/!d;/'"$(uname -r | sed "s/\(.*\)-\([^0-9]\+\)/\1/")"'/d;s/^[^ ]* [^ ]* \([^ ]*\).*/\1/;/[0-9]/!d' | xargs sudo apt-get -y purge and only the current kernel is now installed, which I have confirmed in synaptic and by checking my boot partition. However, when I run: dpkg --list | grep linux-image I get the following response: rc linux-image-3.13.0-30-generic 3.13.0-30.55 amd64 Linux kernel image for version 3.13.0 on 64 bit x86 SMP rc linux-image-3.13.0-32-generic 3.13.0-32.57 amd64 Linux kernel image for version 3.13.0 on 64 bit x86 SMP ii linux-image-3.13.0-34-generic 3.13.0-34.60 amd64 Linux kernel image for version 3.13.0 on 64 bit x86 SMP rc linux-image-extra-3.13.0-30-generic 3.13.0-30.55 amd64 Linux kernel extra modules for version 3.13.0 on 64 bit x86 SMP rc linux-image-extra-3.13.0-32-generic 3.13.0-32.57 amd64 Linux kernel extra modules for version 3.13.0 on 64 bit x86 SMP ii linux-image-extra-3.13.0-34-generic 3.13.0-34.60 amd64 Linux kernel extra modules for version 3.13.0 on 64 bit x86 SMP ii linux-image-generic 3.13.0.34.40 amd64 Generic Linux kernel image Probably not a problem, but just wondering why versions -30 and -32 are reported as present. Can it be rectified? TIA

    Read the article

  • Gparted funkiness - won't recognize 1TB, full-hdd /home partition, but recognizes ext4 and /home label

    - by Kurtosis
    I have a 1TB SATA hard disk from my old desktop, and the entire thing is an ext4 /home partition (/, /boot, and swap were all on another hdd). It is now in a USB2 enclosure and I want to use it to back up my current laptop /home. To do this I need to shrink the /home partition on the 1TB backup drive. It only uses about 500GB so that shouldn't be a problem, I'll start the laptop with an Ubuntu live USB, plug in the 1TB drive, and use Gparted to shrink the 1TB /home partition to ~500GB. Then I can create a second partition in the newly freed space, and cp -ax my laptop's /home over to it. Unfortuntely, Ubuntu Live USB can detect and mount the external hdd, and Gparted can see it's there, but Gparted can't read it and hence can't resize it. Disk Utility reports the drive is fine, no errors, so I'm not sure what's the problem. See linked pics, worth a thousand words. Anyone know what the problem is here? Any pointers in the right direction much appreciated.

    Read the article

  • Co-worker uses ridiculous commenting convention, how to cope? [closed]

    - by Jessica Friedman
    A co-worker in the small start-up I work at writes (C++) code like this: // some class class SomeClass { // c'tor SomeClass(); // d'tor ~SomeClass(); // some function void someFunction(int x, int y); }; // some function void SomeClass::someFunction(int x, int y) { // init worker m_worker.init(); // log LOG_DEBUG("Worker initialized"); // find current cache auto it = m_currentCache.find(); // flush if (it->flush() == false) { // return return false } // return return true } This is how he writes 100% of his code: a spacer line, a useless comment which says nothing other than what is plainly stated in the following statement, and the statement itself. This is absolutely driving me insane. A simple class written by him spans 3 times as much as it's supposed to, It looks well commented but the comments contain no new information. In fact the code is completely undocumented in any normal definition of "documentation". All of the comments are just a repetition of what is written in C++ in the following line. I've confronted him several times about it and each time he seems to understand what I am saying but then goes on to not change his coding and not fix old code which is written like this. I've went on and on again and again about the distinct disadvantages of writing code like this but nothing get through to him. Other co-workers doesn't seem to mind it as much and management doesn't seem to really care. What do I do? (sorry for the rant)

    Read the article

  • Are the only types of data "sources" static and dynamic?

    - by blunders
    Thinking that there might be others, but not sure -- but before getting into that, let me explain what I mean by static and dynamic data sources. Static (or datastore) - Meaning that the data's state is non-changing, and if was changed, that would be a new state, and the old data would be considered stateless; meaning it no longer is known to exist, or not exist. Another way of possibly looking at a static data source might be that if read and written back without modification, the checksum for before and after should be exactly the same regardless of the duration of time between the reading and rewriting of the data. Examples: Photos, Files, Database Record, Dynamic (or datastream) - Meaning that the data's state is known to be in flux, and never expected to be the same per input. Example: Live video/audio feed, Stock Market feed, First let me say, the above is a very loose mapping of the concepts, and I'd welcome any feedback. Next, onto the core of the question, that being are these the only two types of data sources. My guess, is that yes, they are -- but that there are hybrid versions of the two. That being, streaming data that has a fixed state. For example, the data being streamed has a checksum given and each unique checksum is known to be a single instance of static data. On the flip side, static data could be chained via say a version control system; when played back, each version might be viewed as a segment of a stream; thing is, the very fact that it can be played back makes the data source static. Another type might be that the data source is being organically discovered, and it's simply unknown what the state is. Questions, feedback, requests -- just comment, thanks!!

    Read the article

  • Which programming language should i choose? (much more info inside) [closed]

    - by Andreas
    I am not completely sure if this is the right place to put this question, but since it's the programming thread I guessed that there's many experienced programmers here. :) Ok, hello! My name is Andreas and I am a 16 years old guy from Norway. For some time now I've wanted to learn a programming language. Six months ago I started learning C++, but quit withing a week due to lack of motivation. The same thing happend only 2 months ago when I tried to learn Lua. I wanted to program mods to the game Garry's mod, and was really motivated. Then I stopped playing the game, and the programming stopped with it. Today though I am ready again. The only difference is that I am not completely sure what I want to do with the language. I only want to create something, and I miss the progress of failing and enduring hard work until I finally solve the problem I've worked on for hours. What I am trying to say is; Is there any program out there that allows me, a complete noob (I didn't learn that much in a week, so I like to call myself a beginner), to create apps, mods or something similar but at the same time being qualified as a first time language? I was thinking of Java, because Android, Minecraft and many other applications and games use it. But I've heard that it is going to be replaced by a program called HTML 5 (whatever that is), is this true? I certainly don't want to spend many hours of my life on something that is useless in a year or two. Hopefully I didn't make this too complicated. I know that it is hard to recommend something when I don't have a goal, but I really don't know what to say. Have a good day kind folks! - Andreas EDIT:* I did not know that this was an off topic question, really sorry!

    Read the article

  • How to forward AIM to Gmail

    - by iamjames
    Still have an old AIM email address lying around and would like to forward it to Gmail?  Here's how: 1.  Login to your AIM and click on Settings on the far right 2.  In the left menu click IMAP and POP  3.  This shows you your IMAP and POP setup information for AIM.  We're going to put this into your Gmail account so your Gmail account will check your AIM account and download all AIM emails. 4.  Login to your Gmail, click Settings and click Accounts and Import 5.  Click "Import mail and contacts".  A new window will pop up asking what account you want to import.  Enter your AIM Email Address and click Continue 6.  The next page asks for your password.  Enter your password and click Continue.  Step 2 asks your Import options.  I'd put a checkmark in "Leave a copy of retrieved message on server".  That way all your mail is still stored on AIM if you ever need it. 7.  Click Start import and you're done.  Next screen says it make take several hours up to 2 days before you start seeing imported messages and can check the status at Settings > Accounts and Import

    Read the article

  • Upgrade went wrong, laptop essentially 'bricked'

    - by hexagonheat
    I have an old netbook I was trying to upgrade from 10.04 to 10.10. Ubuntu was in the process of upgrading when everything completely froze. I left it sit for an hour but it would not respond to anything. So I powered down the machine and it didn't have the necessary files to run Ubuntu. I went to the terminal and it told me to put in some command that I can not remember to 'rebuild' something. That takes me to now, when I turn on the laptop it comes up with a screen "GNU GRUB version 1.98+20100804-5ubuntu3.3" and has a bunch of options such as: 1. Ubuntu, with Linux 2.6.35-32-generic 2. Ubuntu, with Linux 2.6.35-32-generic (recover mode) etc. (there are like 15 of these with different numbers after 2.6.35 and the word 'generic'. It doesn't seem to matter what I pick, it will go to the "Ubuntu" loading screen with the colored dots but then every time it will freeze and I have to reboot to the same thing. I can't seem to get a terminal prompt anywhere either. Any ideas? I can't think of what to do :(

    Read the article

< Previous Page | 277 278 279 280 281 282 283 284 285 286 287 288  | Next Page >