Search Results

Search found 13909 results on 557 pages for 'old man'.

Page 281/557 | < Previous Page | 277 278 279 280 281 282 283 284 285 286 287 288  | Next Page >

• SAN cache memory upgrade

  - by Scott Lundberg

  We currently have an IBM DS4300 Dual Controller Fibre SAN. It is a good box, but getting pretty old. It came with 256MB of cache per controller. Recently we replaced the batteries in one of the controllers and noticed that the cache is a DDR PC2100 ECC DIMM. Of course, we are thinking about how cheap this RAM is now and is there any good reason we can't upgrade the RAM. IBM used to have a "Turbo" upgrade to this box that doubled the cache and had a bunch of software features for about 10K USD. Since that product has been end-of-lifed, I don't think we can get that upgrade and we don't need the software upgrades (FlashCopy, StorageCopy, etc). Besides the obvious potential warranty issue, what if any issues would we expect to see if attempting to put 2 - 1GB DIMMS in this unit? Any other things I am missing here? EDIT: Memory label: Samsung CN 0433 PC2100U-25331-A1 M381L3223ETM-CB0 256MB DDR PC2100 CL2.5 ECC

  Read the article

• How to have supervisord follows the new unicorn process after USR2 rolling restart?

  - by ybart

  I have configured supervisord to track my unicorn server process. When I send USR2 process, this performs a rolling restart. After this operation the old unicorn master have restarted and then changed PID. This caused supervisor to lose track of the unicorn process considering it as EXITED. How can I have supervisord to follow the new unicorn process after this operation ? Unicorn has a PID file available, but I have not found an option in supervisord configuration for this. An other option would be to have supervisord to send itself the USR2 signal, but I don't know how to perform this and whether it will prevent my problem from occurring.

  Read the article

• Trying to install Windows 7 on Samsung 530u3c. Laptop won't boot

  - by Osvaldo

  I just bought a Samsung 530u3c with Windows 8 installed,so it's a week old. From day one, I have wanted to revert back to Windows 7. So I have created a USB bootable drive with Windows 7 on, and tried installing it both on the SSD 24GB drive and the 465GB SATA HDD. The laptop will not boot from either drive. After trying to boot once, the laptop reboots and then presents me with a boot menu that only shows the SATA HDD. Selecting it does nothing. So I'm losing my mind here. I have absolutely no clue on how to solve this. I'm starting to think i just threw away 700 Euros... :( Any thoughts on what my next steps should be in troubleshooting the issue? Installation goes through without problems. All files are copied. By the time the laptop needs to restart, it goes into a boot loop.

  Read the article

• Export a single layer as an image in Photoshop

  - by wrburgess

  I have a lot of designers send me layered PSDs of their designs and I need to break out the pieces of the designs to place on web pages. I can do a decent number of things in Photoshop, but I'm hardly efficient with it. My old way of just copying the image that's in a layer and pasting into a new image seems to take forever as I screw around with cropping and such. I've got Photoshop CS5, so I don't need external software to do anything, but I just need to figure out how to take a single layer, that may hold something small like an icon, and export it as a PNG or JPG. I am aware of the script called "Export Layers to Files" but it took about an hour and exported ALL of my layers to a huge number of files. I wasn't looking for a solution that broad. Is there an easy way to do this?

  Read the article

• MSSQL Replace Database in Live Web App

  - by casoninabox

  I have a web app that is currently live. I had the need to make major modifications to the database and now I need to replace the current one. My dev SQL instance is not the live one. I usually just make a backup of the new DB, blow the old one away and Restore my updated one. But now I have data I need to preserve. Most of the current tables have changed, in that extra columns have been added, all existing columns are still there and unchanged. I have access to Management Studio. What is the right way to do this?

  Read the article

• Samba4 advice for production use

  - by pgb

  I have an old Samba 3 + LDAP server installed that needs to be rebuilt. I'm weighting my options, and Windows Server seems too expensive at the moment, and Samba 4 appeared to be a nice option, coupled with the last Bind 9 that can dynamically add the computers to the DNS. I have about 30 workstations, so I still consider it a small network. My questions are: Is Samba 4 stable enough for production? It seems as if the Samba team is too cautious on when to call their version final, or even beta, as compared with other open source projects. What Linux distribution would you recommend to set it up? I usually use Ubuntu Server, but may use another one if installing / maintaining Samba 4 is better on that one.

  Read the article

• Drawbacks of installing linux on usb stick?

  - by Znarkus

  I am setting up a router/nas/http/whatever server based on an ION mini-ITX board. I've installed Ubuntu Server on an old 160 GB drive, but it generates a lot more heat and vibrates more than my other new drive (storage). It just doesn't fit the concept, and worse: it takes up a SATA port. As SSD's are crazy expensive I'm thinking of buying an extra 4 GB USB stick, and raid0 it. From my point of view, these are the pros/cons: Pros Low power consumption No vibrations No heat Smaller Get to buy new, larger USB stick (:D) Cons Shorter life time Slower Raid 0 More work maintaing/installing? I think the pros overweighs the cons. Shorter life time and raid 0 is countered by regular backups of the configs/settings. Slower is partially countered by raid 0, and I don't know about the last one. What do You think? Experience? Another solution?

  Read the article

• How to diagnose repeated freezing of windows 7 (comes back alive in few seconds)

  - by Akash Kava

  I installed Windows 7 in a 3 year old machine, it installed successfully, took all drivers and running great, but what happens is every 5-6 minutes it freezes for few seconds... 30 seconds to 1 minute and then comes back alive. I checked Event Viewer, nothing matching the frozen timeline. I would appriciate any help on how to detect causing service/hardware. After it comes alive, everything runs normal, I did run task manager and checked cpu usage, at time it freezes just before and after that no task took more cpu or memory, it was like idle machine. No external usb drives or no devices, on board intel desktop board with SATA HDD, SATA hdd running in absolute good mode.

  Read the article

• Mac claims to have connected to wireless network, but hasn't

  - by Mick

  I am attempting to connect a new mac OSX 10.6.5 laptop to a wireless network (I am a windows expert but a mac novice). It used to connect without problem to the network when I had the security set to "64 bit wep". Now I have changed the security on my belkin router to "WPA-PSK (no server)". I have two PC's and an old mac connecting via the new security setting without problem. Now I have the problem that on the new mac, the wireless icon is indicating a good connection (5 dark bars). Also the network name has a tick next to it on the wireless drop down menu. But I can not view any websites. I can not even connect to the router by typing 192.168.2.1 into a browser address bar. Any ideas where I went wrong?

  Read the article

• Recover data from an ''unpartitioned'' hard drive

  - by Rafael S. Calsaverini

  I'm trying to recover data from a hdd for a friend from work. He was using it on an old win98 PC (so I guess it was a FAT 16 filesystem). When he installed the drive on a new PC his Windows XP can't recognize the filesystem and give an error message saying that the drive is unformatted. I tried to mount the hdd under linux but no partitions appear to be associated with the drive (I have only /dev/sdb associated with that drive and no /dev/sdb1 or sdb2 etc). I've found many articles on the web on how to recover partitions (with scripts like dd and ddrescue) but how do I make it when I have no partitions and the system say my drive is unpartioned? Is it possible to create a new partition without loosing the data?

  Read the article

• Why does Windows spooler require an administrator account?

  - by Software Monkey

  Does anyone know what changes I might need to make to allow restricted users to print using a printer configured for spooling? My Windows XP SP3 system currently requires me to use an Admin account for printing if the printer is configured to spool documents before printing. If the printer is configured for direct printing it works for all accounts. This used to work and some months back it just stopped, and I can't pin down why. The printer, which is an HP PSC 1200 (an old printer) itself is configured for Everyone to have Print authority and my specific (restricted) account to have Full authority, that is Print, Manage Printers and Manager Documents. My HDD is locked down for restricted users given them only read authority to the entire file system except their data directories, which is how I have run my systems for years. I assume there may be a directory somewhere that I need to allow users to write to.

  Read the article

• Create a CDROM Bootdisk to update BIOS

  - by osij2is

  So, I have a Tyan Opteron board with a very old BIOS version. I realize Opteron's aren't exactly common like Athlons, Phenoms, Intel CPUs, etc. but my question revolves around updating the BIOS, however I don't have a floppy drive and there's no option to boot off of a USB key. Tyan has incomplete instructions on their website (link) on how to flash the BIOS via USB. So my second tactic has been to create a Windows 98 boot-able CDROM with the flash utilities on it. It's been years since I've made one but after going to sites like bootdisk.com and such I haven't had any success. Can anyone tell me step-by-step how to make a boot-able Windows 98 CDROM? I can't believe I'm having such a hard time doing this but I've failed on four different attempts and I must be doing something wrong or I'm not accounting for something.

  Read the article

• Can my PowerMac G3 B&W really take a harddrive larger than 128GB?

  - by Josh Calvetti

  So it's a well known fact that the PowerMacs manufactured before 2002 cannot take a harddrive larger than 128GB. I have an old B&W that was running 10.4, and upon putting a 250GB drive inside, it told me that I had inserted a 128GB. That was expected. However, I recently decided to turn that machine into a Debian home file server. I shoved the 250GB drive inside, did some formatting, and now it tells me that it is a 250GB drive. Is this safe to use? Will all my data go corrupt after I've added more than 128GB of stuff? In case the specs are helpful to have, it's a 400MHz B&W, 1GB RAM, Rev. B.

  Read the article

• Regarding compatibility of Intel Pentium D 805 CPU with new motherboard

  - by aniruddhabhide

  I currently have an old configuration with Intel Pentium D 805 CPU and Intel D101GGC chipset. Now I am planning to upgrade my system except CPU and hard disk since it doesn't fit in the budget. QUESTION: I am planning to get Gigabyte GA-B75M-D3H Motherboard which has LGA1155 socket. But my processor has PLGA775 socket type. Will my CPU fit in thee new motherboard's socket? LINKS: CPU specs (Intel site): http://ark.intel.com/products/27511/Intel-Pentium-D-Processor-805-2M-Cache-2_66-GHz-533-MHz-FSB New Motherboard specs (Vendor site): http://www.flipkart.com/gigabyte-ga-b75m-d3h-motherboard/p/itmdacp36gegyeqt?pid=MBDDACP2GUBGFPFM

  Read the article

• Converting videos to AVI with AVIDemux for compatibility

  - by Synetech

  I am trying to convert a couple of short videos to AVI (XviD) using AVIDemux. I find that while the resulting videos play fine in VLC, they do not play in an XviD DVD player (nor presumably Xbox 360, PS3, etc.). In fact, they do not even show in Windows Explorer (that is, Explorer cannot read their metadata or display thumbnails). I tried using all three of the AVI Muxer Output Format options, but none worked. Does anyone know what settings to use to produce compatible AVIs with AVIDemux? (I found an old thread where someone complained about AVIs not working on Xbox, but that was a few years ago from an older version.)

  Read the article

• Recovering OST file without profile

  - by Philippe

  We have a Microsoft Exchange Server 2007 and offer this solution to many customers. Recently, a customer had his personal Exchange server crash (which is what made him our customer). He called some technician to see if he could repair his server before calling us, but this said tech wasn't able to do anything for them. Now that all his mailbox are on our server, he would like to transfer his old emails over to the new profile, but the tech deleted all profiles on the client machines while trying to repair his Exchange server. So my customer still has the OST files but they are not related to any profiles. Is there any way to re-attach them to a profile, or to convert them into PST files that he could then import into his new profile? The only thing I found were third party software that could to the conversion, but I am wondering if Microsoft has any tools that could re-attach the OST to a new profile. I have also tried the scanpst.exe and scanost.exe to no avail. Thank you

  Read the article

• Removing Exchange 2010 and SBS2011 gracefully after migration to Server 2008 Std R2

  - by user145275

  We have recently completed a server replacement for a customer. They had SBS2011 using Exchange 2010. They now have Server 2008 Std R2 and Google Apps email. We have migrated the DHCP, DNS, Filserver and all 5 FSMO roles to the new 2008 R2 server (today). During the grace period for SBS2011 we intend to decomission the old server completely. Previous experience would suggest uninstalling Exchange 2010 then demote SBS2011 then remove from the domain and switch off. Can I simply demote SBS2011 without removing Exchange? Can't really find any walkthroughs on this. My concern is that if we simply turn off SBS2011 the AD is left in a mess with legacy Exchange objects making any potential reintroduction of Exchange difficult in future, plus I want to do it the right way!

  Read the article

• New standalone ESXi 5 deployments - USB versus SD card?

  - by ewwhite

  Now that the old full VMWare ESX with service console is no longer, I'm redeploying some standalone ESXi servers. I'm using HP ProLiant ML and DL G6 and G7 servers. Does it make more sense to utilize the internal USB port for ESXi or the internal SD card slot? I'm using the HP ESXi 5 build, but am not sure what the recommended practice is. Any recommendations on cards/USB drives for this purpose? BTW - these will be all-in-one storage servers with the onboard disk storage presented via PCIe passthrough.

  Read the article

• SQL Server iSCSI session issue with a NetApp SAN

  - by Matt Beckman

  We had an issue early this morning when iSCSI issues broke connectivity with a few of our databases (resulting in a SQL Server Error 21). Attempts to DBCC CheckDB did not work, and the only solution was to restart the SQL Service. Is there a known reason why an iSCSI initiator session would reset itself out of the blue? Example below from the NetApp syslog. This set of errors was replicated 4 times (once for each SQL server in production). Only one SQL server was noticeably impacted, however. [san1: iscsi.notice:notice]: ISCSI: iswta, ISID Rule: new connection from same initiator, shutting down old session 7 [san1: iscsi.notice:notice]: ISCSI: iswta, New session from initiator iqn.1991-05.com.microsoft:sql1.example.corp at IP addr 10.xxx.xxx.123

  Read the article

• Why does installing NVidia 9600GT graphics card, take 1GB of RAM away from Windows?

  - by Nick G

  Hi, I've changed graphics cards in my PC and now Windows 7 (32bit) is reporting that I have a whole gigabyte less physical RAM in my PC. Why is this? Firstly, the machine has 4GB of physical RAM. The old card was an ATI 2600XT with 256MB and the new card is an NVidia 9600GT with 512MB. With the ATI card windows sees 3326MB. With the NVidia card, windows sees 2558MB. I realise that due to address space restrictions I will not see all 4GB with 32bit windows, but why is there such a massive loss of RAM when simply changing cards (bearing in mind BOTH cards have their own RAM and borrow no main memory like some built on chipsets do). Would using 64 bit windows solve this? Thanks Nick.

  Read the article

• Reduce Windows DNS Service caching on Window

  - by Nick G

  I'm struggling with DNS caching issues on a Windows based LAN. I've noticed that if I change a DNS record on a domain hosted by a 3rd party nameserver, that I always seem to be the very last person to see the change happen. I can often query the domain using a service which checks propagation around the world like www.whatsmydns.net but I usually find that all other DNS servers are correct and it's only my own server which has the old IP - even 8-12 hours later. This is an issue for us as we're website developers and often making changes to DNS records so these huge delays are frustrating. It seems to be because our primary domain controller server (+Active Directory & DNS) on our LAN (which is also our local DNS server) caches records for AGES (Way beyond it's published TTL). How can I stop the Windows DNS server from caching, or reduce the caching to only an hour or so?

  Read the article

• Minidump folder cannot be found

  - by Saxtus

  Although I have enabled the creation of minidump files in my system, it appears that either Windows doesn't create them where the Startup and recovery dialog points to (%SystemRoot%\Minidump) or at least I can't find them. Even the Minidump folder under Windows directory is missing and I had numerous BSODs till now. I've searched all my HDs for mini*.dmp files only to find some old ones in a backup folder from my Vista 32-bit installation, before I install Windows 7 64-bit. Any thoughts of why this is happening and how to fix it?

  Read the article

• Logrotate Successful, original file goes back to original size

  - by drewrockshard

  Has anyone had any issues with logrotate before that causes a log file to get rotated and then go back to the same size it originally was? Here's my findings: Logrotate Script: /var/log/mylogfile.log { rotate 7 daily compress olddir /log_archives missingok notifempty copytruncate } Verbose Output of Logrotate: copying /var/log/mylogfile.log to /log_archives/mylogfile.log.1 truncating /var/log/mylogfile.log compressing log with: /bin/gzip removing old log /log_archives/mylogfile.log.8.gz Log file after truncate happens [root@server ~]# ls -lh /var/log/mylogfile.log -rw-rw-r-- 1 part1 part1 0 Jan 11 17:32 /var/log/mylogfile.log Literally Seconds Later: [root@server ~]# ls -lh /var/log/mylogfile.log -rw-rw-r-- 1 part1 part1 3.5G Jan 11 17:32 /var/log/mylogfile.log RHEL Version: [root@server ~]# cat /etc/redhat-release Red Hat Enterprise Linux ES release 4 (Nahant Update 4) Logrotate Version: [root@DAA21529WWW370 ~]# rpm -qa | grep logrotate logrotate-3.7.1-10.RHEL4 Few Notes: Service can't be restarted on the fly, so that's why I'm using copytruncate Logs are rotating every night, according to the olddir directory having log files in it from each night.

  Read the article

• how to configure my internal dns to resolve external resources

  - by Ralph Shillington

  I have an internal DNS as part of my AD setup. I have an hosted DNS for public resources (which are typically at some data centre somewhere) Occasionally while on our internal network I need to get to a public resource --- for example www.ourcompany.com since there isn't a www record in our internal DNS I cant get the name resolved. How do I configure my DNS to forward names it doesn't recognise to the public DNS. Update: As per the comment yes I have a "split-horizon" dns (which seemed like a good idea at the time) This AD setup is less than 24 hours old, and can be redone if need be -- (although I would rather not)

  Read the article

• Cloning hard drive -- data, operating system settings, everything

  - by Salman A

  I am using Windows XP. My hard drive (Seagate 160gig Barracuda) is about to fail. Its already developed bad sectors and it seems to get worse everyday. Data transfer mode is down to PIO mode 2, chkdsk runs every now and then, registry and important windows files get corrupted and I spend 30-60 minutes running chkdsk /f /r from the recovery console. I've got a replacement (Seagate 5000gig Barracuda) and now i want to transfer each and every thing on to the new drive. I don't want to go through windows and software installation, I spent ages getting all those software installed and configured on that hard drive. Need advice: whats the best way to transfer everything onto the new drive so that it behaves just like the old one. And are there any "gotchas".

  Read the article

< Previous Page | 277 278 279 280 281 282 283 284 285 286 287 288  | Next Page >