Search Results

Search found 46013 results on 1841 pages for 'super chicken'.

Page 281/1841 | < Previous Page | 277 278 279 280 281 282 283 284 285 286 287 288  | Next Page >

• There's a stray current flowing from my monitor through the VGA cable to the PC. Is this safe?

  - by EApubs

  I have two monitors in my machine. One is an old LCS samsung monitor. Recently, I started to hear a small hum in my speakers (subwoofer) and replaced them. The new one also got the issues then I found our that its a grounding issue. I unplugged the PC's power chord. The monitor is still switched on. When I checked, there's current in the earth pin (ground pin). When I unplug the monitor, there's no current and the speaker is normal. Now, I have moved that monitor to my dad's machine and took his monitor. My question is, is it a big issues? The house's earthing system is working and its grounding the current. I won't feel it if I touch the machine like in many other cases. But still, is it good to keep that monitor attached to my machine? Can it harm the computer? What should I do?

  Read the article

• VPN on OSX disconnects after precisely 2 minutes and 30 seconds on specific network

  - by Tyilo

  When connecting to my own VPN server on a specific network, called public-network, my Mac disconnects the VPN connection after 2 minutes and 30 seconds. I have performed several tests and this is the result: It works fine until the 2:30 mark It doesn't matter which Mac I use, it still disconnects It doesn't matter which client I use, all of the following does the same: OSX system client, HMA! Pro VPN and Shimo It doesn't matter which protocol I use, at least all of these protocols does the same: PPTP, OpenVPN and L2TP over IPSec The same thing happens using my own VPN server and HMA!'s VPN server. All other clients (Windows/iPhone) can use any of these VPN servers and protocols without problem on public-network On OSX, all the protocols, clients and servers works fine on any other network So it seems that it is the combination of OSX, VPN & public-network that causes this. This is the syslog from my VPN server, when the disconnection happens: Feb 2 12:04:32 raspberrypi pptpd[31400]: CTRL: EOF or bad error reading ctrl packet length. Feb 2 12:04:32 raspberrypi pptpd[31400]: CTRL: couldn't read packet header (exit) Feb 2 12:04:32 raspberrypi pptpd[31400]: CTRL: CTRL read failed Feb 2 12:04:32 raspberrypi pptpd[31400]: CTRL: Reaping child PPP[31401] Feb 2 12:04:32 raspberrypi pppd[31401]: Hangup (SIGHUP) Feb 2 12:04:32 raspberrypi pppd[31401]: Modem hangup Feb 2 12:04:32 raspberrypi pppd[31401]: Connect time 2.5 minutes. Feb 2 12:04:32 raspberrypi pppd[31401]: Sent 3963649 bytes, received 362775 bytes. Feb 2 12:04:32 raspberrypi pppd[31401]: MPPE disabled Feb 2 12:04:32 raspberrypi pppd[31401]: Connection terminated. Feb 2 12:04:32 raspberrypi pppd[31401]: Exit. Feb 2 12:04:32 raspberrypi pptpd[31400]: CTRL: Client <ip-adress> control connection finished

  Read the article

• How do I configure custom routes when an interface is configured?

  - by ManicDee

  Other Superuser questions have addressed the issue of adding custom routes to access e.g.: multiple networks of a corporate network through one interface, while accessing the Internet through another interface. So assuming that I have a script to add specific routes when en0 is configured, and a separate script to add specific routes when en1 is configured, is there some way I can trigger those scripts to run automatically when Mac OS X/Darwin starts and configures those interfaces? Back in my Linux days, it was possible to add an option in /etc/network/interfaces along the lines of: iface eth0 inet dhcp up /usr/local/sbin/eth0-routes-up Is there something similar for Mac OS X?

  Read the article

• Terminal OS X Error when using Python

  - by Stephen

  Hey, I'm trying to learn how to program so I've installed the latest version of Python and I've been following the Byte of Python tutorial. I'm using Textwrangler I've only gotten as far as the simple "Hello World" intro and I'm already having a problem. I type out the code (just without the ""): "#!/usr/bin/python" "#Filename: helloworld.py" "print('Hello World')" and save it to my desktop as helloworld.py. I then go into terminal and type "python3 helloworld.py" and I get the following error message: /Library/Frameworks/Python.framework/Versions/3.1/Resources/Python.app/Contents/MacOS/Python: can't open file 'helloworld.py': [Errno 2] No such file or directory I was hoping someone could tell me what I'm doing wrong. If I choose to run the script from Textwrangler it operates just fine however I'm not able to access it from the Terminal. Thanks so much!

  Read the article

• Apple Service Diagnostic application on USB key?

  - by Matt 'Trouble' Esse

  I found the following in a text file, and I would like to use the Apple Service Diagnostic Application from a bootable USB key but I cannot find where to download it or set it up? Also is this free software or does it require a separate licence? It sounds like it would be a useful tool for diagnosing Mac problems. The Apple Service Diagnostic application is designed to run both EFI and Mac OS X tests from an external USB hard drive. Apple Service Diagnostic (EFI) runs low-level tests of the hardware directly and does not require Mac OS X, while Apple Service Diagnostic (OS) uses Mac OS X to run tests. Booting and Using the Apple Service Diagnostic Application - Before using Apple Service Diagnostic, disconnect any Ethernet network, USB, and audio cables. - With the USB hard drive containing ASD 3S123 plugged into a USB port, restart the computer and hold down the option key as the computer boots up into the Startup Manager. To run ASD (EFI) select the "ASD EFI 3S123" drive icon and press return or select it with a mouse click. To run ASD (OS) select the "ASD OS 3S123" drive icon and press return or select it with a mouse click. ASD (EFI) will load in 20-30 seconds; ASD (OS) will load in 2-3 minutes. - After running ASD (OS) or ASD (EFI), press the Restart button to restart the computer back into the normal startup volume, or hold down the option key to get back to the Startup Manager. ASD is no longer delivered as an image to be restored onto a DVD. ASD 3S117 and newer versions requires installation onto an external USB hard drive. For more information, please refer to the document "Installing ASD on a USB hard drive".

  Read the article

• Networking a server with wireless network

  - by Benjamin Harding

  Right, I have a wireless network at home, and a server without a wireless adaptor, I also have upteen amounts of ethernet cables lying around. There is a laptop in the same room as the server, with a wireless connection, would there be a way to connect the server to the internet using the laptop?

  Read the article

• WAMP Server vs LAMP Server

  - by Rob A

  Hi All, Just wondering, I want to set up a basic web server at home. I run Windows (XP on the machine to be a server), however I also have Ubuntu on hand if I need to run that. Basically I was wondering if there are any large difference between WAMP servers and LAMP servers? I know the run virtually the same software, but does one perform better than the other? Are there hidden benefits of running it in Ubuntu instead of XP, or the other way around? I know its a basic question, but I havent done anything with Ubuntu, and Ive done about the same amount with web server-ing. Thanks!

  Read the article

• What's the best way to share folder between guest and host machine in VMWARE over VPN?

  - by melaos

  i have a win 7 host machine and i'm running my vmware which is a win server machine. So i'm doing windows development work on my vmware. the source codes are in my win 7 machine which i access using a shared folder method. My only problem now is when my vmware connects to VPN to the deploy the codes, the folder gets disconnected. as i don't really understand the networking or the vmware architecture, what can i do so that i can share the folder from my win 7 host machine to my vmware without getting disconnected when i connect to VPN using my guest (win server) machine? please advise. stuck on vmware thanks

  Read the article

• VLOOKUP and match functions appear to be searching the function rather than value

  - by Brandon S.

  Vlookup and match seem to be searching based on the function I have in my cell rather than the value i have in the cell. I have a column with dates, (ex: C2, which has the formula =E2&"/"&F2&"/"&D2 in them, for example). (where E2, F2, D2 are the year, month, and date). In another sheet and column, I have a bunch of dates, and i'm using the formula =VLOOKUP(C2,'sheet2'!A1:B252,2,FALSE), which doesn't work. (returns #N/A) If I replace C2 with the same date, but without the formula (just typing it in), VLOOKUP works. Why is this?

  Read the article

• Virtualbox 4 hangs when trying to install ubuntu guest on ubuntu host system

  - by misterjinx

  I'm trying to install ubuntu server using virtualbox 4.0.4 in a ubuntu 10.10 host OS. I have the iso image on my hard drive which I used to perform the install. I edited the settings and added this image at the storage section, selected it as a primary master, so I could boot from it and start the install process. But now, each time I start the installation, at the very beginning or if I'm lucky, after I click on the install link at the welcome screen, the process hangs and all the computer is blocked. This happened 3 times already. I even tried to perform the installation using an old CD I had with the 9.10 server version, thinking that the iso image might be the issue, but the problem still persists. I dont know what could cause this problem. My computer is a dell laptop with AMD processor (I dont know if this is important). Any help is very appreciated.

  Read the article

• Ubuntu not showing disk

  - by ojek

  I have a laptop which had broken windows 7 installed on it. I created a ubuntu live usb and tried installing ubuntu over that win7. After a few minutes, I got an error message, so I needed to restart the computer. Now the laptop says that there is no bootable device - reasonable message given that there was an error during linux installation. But: Bios can see my hard drive, When I start ubuntu in live mode, and try either sudo fdisk -l or gparted, it doesn't show any hard disk drives. I am 90% sure that hdd is broken, but it is wierd that bios can see it, and ubuntu doesn't. How can I be 100% sure about that hdd? Is there any additional way of detecting my hdd from ubuntu?

  Read the article

• Can you swap dpi buttons on the Astra Dragon War mouse with 4th and 5th buttons?

  - by Denny Nuyts

  I'm left-handed and I'm in need of a good computer mouse with at least five buttons. However, most computer mice on the market are sadly right-handed and very impracticable to use with the extra buttons on my pinkie side instead of on my thumb side. The Dragon War Astra has two buttons on both sides. Buttons 4 and 5 on the left side and the dpi-buttons on the right side. If I were just able to re-assign them so they swap positions I'd have a great left-handed mouse. Sadly, the program X-Mouse Button Control doesn't allow the user to re-assign dpi buttons. My question is whether there exist other methods to still get it to work for me (third party programs, perhaps?). Or should I get another gaming mouse?

  Read the article

• Pass the output of ls to diff

  - by joachim

  I have one file that contains a list of files from a server, and a local folder that I compare to that manifest. Obviously, I do 'ls -1 listing_local' and then diff that file with listing_server. But is it possible to diff the manifest and the output of ls immediately to the diff command?

  Read the article

• Linux command to concatenate audio files and output them to ogg

  - by hasen j

  What command-line tools do I need in order to concatenate several audio files and output them as one ogg (and/or mp3)? If you can provide the complete command to concatenate and output to ogg, that would be awesome. Edit: Input files (in my case, currently) are in wma format, but ideally it should be flexible enough to support a wide range of popular formats. Edit2: Just to clarify, I don't want to merge all wmas in a certain directory, I just want to concatenate 2 or 3 files into one. Thanks for the proposed solutions, but they all seem to require creating temporary files, if possible at all, I'd like to avoid that.

  Read the article

• Socket error sendig data from loftware to zebra zm400

  - by Mike

  I have a problem with my Zebra zm 400. I print a label from loftware, and in random times comes the label not out from the printer. When this issue comes, then I can't ping my printer or I can't achive the webpage of the printer. Only I need to disconnect the UTP cable from te Zebra. and after this disconnect work the printer fine. And in variale intervals come this problem again! Thanks and regards, Mike

  Read the article

• Change default DNS server in Arch Linux

  - by AntoineG

  I'm in Viet Nam and most social websites (Facebook, Twitter and the likes - even reddit) are blocked by the ISP DNS server. I tried to change the DNS server of my Arch box using the resolv.conf file, but it failed miserably since dhcpd generates this file automatically everytime I connect to the LAN. I've been looking around to try and find out how to fix this, without success. Either I s*ck at Googling, either it is non-trivial to do so. EDIT 1: Meh, apparently posting it here made me feel guilty and I had to push my search a bit more. I found the same article than Ankur post below. This is what I made, if anybody ever faces the same problem: $ sudo gvim /etc/dhcpcd.conf Add "nohook resolv.conf" at the tail of the file. $ sudo gvim /etc/resolv.conf Add to the file (OpenDNS servers): nameserver 208.67.222.222 nameserver 208.67.220.220 Or (Google DNS): nameserver 8.8.8.8 nameserver 8.8.4.4 Then, verify it worked (need package dnsutils): $ dig www.facebook.com ; <<>> DiG 9.9.1-P1 <<>> www.facebook.com ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 16994 ;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 1 ;; OPT PSEUDOSECTION: ; EDNS: version: 0, flags:; udp: 4096 ;; QUESTION SECTION: ;www.facebook.com. IN A ;; ANSWER SECTION: www.facebook.com. 89 IN A 69.171.224.53 ;; Query time: 87 msec ;; SERVER: 208.67.222.222#53(208.67.222.222) ;; WHEN: Thu Jun 28 00:43:23 2012 ;; MSG SIZE rcvd: 61 See ;; SERVER: 208.67.222.222#53(208.67.222.222), it worked.

  Read the article

• Youtube videos all appear transparent in Chrome (I can see through to my desktop -- see pic!)

  - by kalaracey

  MBP 6,2 :: Google Chrome 13.0.782.32 beta :: Adobe Flash Player 10,3,181,26 UPDATE: only Youtube is affected. Vimeo, other flash, etc. all works great. Hello. I recently had to hard reboot my MBP. After that, I could not watch Youtube videos or (I believe) other flash enabled content. The videos appear transparent, as if there were a "hole" in my browser (Chrome) such that I could see through the hole and see my desktop. I've attached a picture (just picked a random video) Thanks.

  Read the article

• Offline installer for Windows 8?

  - by duncan12

  I have a computer repair service, and can see a few more people wanting Windows 8 updowngraded. Because of New Zealand's internet speeds it takes 1-2 hours to run the download part of the official Windows 8 upgrade tool. This means I have to go back to people the next day. I would like to keep an "offline" version of the Windows 8 upgrade tool on my flash drive, so I can avoid this inconvenience. Obviously it would still require a legit credit card etc, it just comes with the download part not needed. I cannot find such a tool. Does one exist?

  Read the article

• CPU installation

  - by David Oneill

  I'm in the midst of building a computer (this is my first time). When I first put the heatsink on the CPU, I was a little off center. Some of the thermal compound came off, so when I re-centered it, it isn't completely evenly distributed. So here's my question: how picky are CPUs in terms of how evenly the thermal compound is? Should I take it apart, clean it, and apply a new layer of compound? Or can I just keep an eye on the CPU temperature? (I'm not overclocking or anything, if that matters)

  Read the article

• Pausing a .gif animation in Google Chrome

  - by Ciaran

  Is it possible to "pause" an animated gif file in Google Chrome? If so, how do I do it? I've tried Esc without luck. I'm aware that other browsers can do this using the Esc key I thought I saw a similar question on here before but couldn't find it - close as dupe if you can find it

  Read the article

• Unable to create a permanent alias in Mac OS

  - by Alex

  In Linux I can well to add alias to bashrc and it will become a permanent alias. In Mac OS I tried to do the same thing: vim ~/.bashrc export PATH="$PATH:$HOME/.rvm/bin" # Add RVM to PATH f or scripting alias prj="cd ~/Documents/projects" ### Added by the Heroku Toolbelt export PATH="/usr/local/heroku/bin:$PATH" That being said, I got this: $ alias alias rvm-restart='rvm_reload_flag=1 source '\''/Users/alex/.rvm/scripts/rvm'\''' So where is my prj alias? I rebooted the laptop but nothing has changed.

  Read the article

• When and why would Windows Explorer lock an external hard disk?

  - by Ngu Soon Hui

  I am quite surprised to see that Windows Explorer is locking my external hard disk. Is there any reason why explorer.exe is holding on to my external hard disk? Before I was trying to detach the external hard disk, I was opening a csproj file using Visual Studio 2008. I made sure that I closed down Visual Studio before trying to detach the external hard disk. There was no other active program except Google Chrome, from what I could see, that was running.

  Read the article

• Is there an unintrusive antivirus program that I can ask to scan object on demand only? [closed]

  - by Faken

  Possible Duplicate: Recommended offline on-demand virus scanners I'm looking for an unintrusive antivirus program that I can get to run scans on suspicious objects on demand and only on demand. Most other antivirus programs install many layers of protection and things running in the background and preform regular updates and system scans at inconvenient times. I want an antivirus program that I can simply right click and object and select "scan for viruses" and nothing more. Is there a reliable antivirus program out there that offers this and only this without the automatic updates, background processes, and intrusive automatic system scans? Note: this is for Windows.

  Read the article

• Quick, Linux-compatible unit-aware calculator

  - by endolith

  I want to be able to press a keyboard combination, start typing a mathematical expression that includes units and slightly advanced math (not just a four-function calculator), and get a result immediately, in units that I specify, that I can copy and paste. Currently I open Firefox and press Ctrl+K, type in the search box, and it usually gives me a result in the drop-down from Google Calculator. It doesn't always, though, so I press "=" at the end, wait for a result, remove the equals, wait for a result, realize it doesn't understand the way I typed a unit, open the result in a new tab, etc. it sucks. Wolfram Alpha is smarter, but very much slower, and the output is all images, not text, and I don't have a quick widget for it, if such a thing could even exist. GNU units has a ton of units, which is great, and I can define my own units, which is great, but they have to be written in specific, unintuitive ways, it doesn't handle much advanced math, and I'd need to open a terminal, start units, etc. I hate the command line. I wasted a lot of time trying to make front-ends for units in Deskbar and Launchy, but I'm not a real coder and I don't use either of those anymore. Any other solutions or enhancements of these?

  Read the article

• USB wiped itself but still showing that its full?

  - by Brian Takan

  My Data saved from laptop to usb, and then I pulled it out, then something popped up on the screen saying that it was full and that I needed to delete stuff, so I put the USB back in and went to computer and all to go into it and when I did it isn't showing anything on the usb but when I go to computer it still shows that the usb is full. Does anybody know what is going on ? How can I get my data again?

  Read the article

< Previous Page | 277 278 279 280 281 282 283 284 285 286 287 288  | Next Page >