Search Results

Search found 8875 results on 355 pages for 'live broadcast'.

Page 282/355 | < Previous Page | 278 279 280 281 282 283 284 285 286 287 288 289  | Next Page >

• Windows XP SP3 Keyboard stops working

  - by Kevin K

  Here's the strangest thing I have yet to see in 20+ yrs of computer repairs. My in-laws Windowsx XP SP3 has stopped recognizing keyboards. The keyboards work fine in the BIOS, during the boot select process to boot normally, etc. but once Windows comes up it will not recognize any USB keyboard. The USB mouse works fine, have tried different USB ports, different keyboards, etc. nothing works. I can log into the machine via VNC and use the remote keyboard just fine, but not connected locally. Tried a system restore, it says nothing changed. I am about to just re-install Windows at this point, except I am afraid it will happen again. I have googled for this and it is not unheard of, but I have not found any solution other than nuking it. Anyone have any ideas? I have re-installed the USB drivers for the M/B. Gone into devices and deleted them for a re-install, etc. Keyboard works off a Linux live boot CD, and in the BIOS setup so it is not a hardware issue, and I have tried a few keyboards all of which I know are good and work fine on other systems.

  Read the article

• Developer's PC - worth getting more than 8GB RAM?

  - by Borek

  I'm building a developer PC and am wondering whether to get 8GB or 12GB. It's a Core-i7 860 system, i.e., 1156 motherboards with 4 slots for RAM sticks, dual channel, usually up 16GB (as opposed to 1366 sockets where 6 banks / triple-channel are used). 8GB would be cheaper to get especially because price per GB is lower with 4x2GB compared to 2x4GB. Also the availability is worse for 4GB DIMMs here where I live; those are the main practical advantages of 8GB. (Edit: I should have stressed the price difference more - in the eshop I'm buying from, the difference between 12GB and 8GB is so big that I could almost buy a whole new netbook for it.) However, I understand that more RAM can never do harm which is the point of this question - how much of a difference will 12GB make as opposed to 8GB? Honestly, I've always been on 3.2GB systems (4GB but 32bit system) and never felt much pain from having too little memory - of course there could be more but for instance compiler's performance was usually held back by slow I/O or not utilizing multiple cores on my CPU. Still, I'm not questioning that 8GB will be useful, however, I'm not sure about the additional 4GB difference between 8 and 12 gig. Anyone has experience with 8GB / 12GB systems? The software I usually run all the time: Visual Studio or Eclipse (both should be fine with ~2GB RAM, after that I feel their performance is I/O bound) Firefox (it can never have enough RAM can it? :) Office (~500MB RAM should be enough) ... and then some smaller apps like Skype, other browsers, some background services etc.

  Read the article

• WSS 3.0 Backup/Restore Root Site Collection to Sub-Site of New Site Collection

  - by bfrancis

  Our intranet was originally setup to be at the root of its site collection. We are trying to change this so that our new internet site will live in the root and the intranet will be a sub-site. At this point I have created a new web application and site collection to house the internet and intranet. I used the 'stsadm -o backup' command to create a backup of our current intranet. I then ran the 'stsadm -o restore' command to restore the intranet site collection to wss/sites/intranet. This seems to have worked as I am able to access the intranet from this location. The issue I now seem to have is that images, sub-sites, etc. are all making reference as if the intranet is still the root site. So for example a link to a sub-site is pointing to wss/department/technology/default.aspx and it needs to point to wss/sites/intranet/department/technology/default.aspx. I am looking for help and/or clarification on two things: 1. Am I approaching the migration of a root site collection to a sub-site the best way? 2. How would I go about updating the link references so that they are based on the intranet now being a sub-site instead of the root site?

  Read the article

• Nagios Apache Config with PHP-FPM downloading cgi files

  - by tubaguy50035

  I'm trying to setup Nagios 3 under Apache 2.4 with PHP-FPM. I've run into a couple problems I could use help with. The PHP side of things seems to be working, I can see the home page and the sidebar. But all of the CGI files are downloading instead of executing, and when I try to click on "Read What's New In Nagios Core 3", I get an error /nagios3/docs/whatsnew.html was not found on this server. Below is my vhost config for Nagios. <VirtualHost *:300> # apache configuration for nagios 3.x ScriptAlias /cgi-bin/nagios3 /usr/lib/cgi-bin/nagios3 ScriptAlias /nagios3/cgi-bin /usr/lib/cgi-bin/nagios3 # Where the stylesheets (config files) reside Alias /nagios3/stylesheets /etc/nagios3/stylesheets # Where the HTML pages live Alias /nagios3 /usr/share/nagios3/htdocs ProxyPassMatch ^/(.*\.php)$ fcgi://127.0.0.1:9001/usr/share/nagios3/htdocs/$1 <DirectoryMatch (/usr/share/nagios3/htdocs|/usr/lib/cgi-bin/nagios3|/etc/nagios3/stylesheets)> Options FollowSymLinks ExecCGI AllowOverride AuthConfig Order Allow,Deny Allow From All AuthName "Nagios Access" AuthType Basic AuthUserFile /etc/nagios3/htpasswd.users require valid-user </DirectoryMatch> <Directory /usr/share/nagios3/htdocs> Options +ExecCGI </Directory> </VirtualHost> I also added this in my global Apache config: AddHandler cgi-script .cgi Any help or instructions you can give me would be much appreciated. If more information is needed, let me know.

  Read the article

• Split horizon, route filtering, and having RIPv2 announce a non-attached route to host

  - by Paul

  Routers A, B & C live at 10.1.1.1, 10.1.1.2 and 10.1.1.3 on a /24 metro Ethernet subnet. Each router also has its own private subnet on another interface. Router B's private subnet links thru a firewall to a 10.20.20.0 network at another organization. Router B redistributes to A and C several static routes for hosts on 10.20.20.0. However, a new host 10.20.20.5/32 must be reached via a different path that goes through router C. I know that C can advertise this host-based route with no problem, but I'd like to keep all my 10.20.20.x static routes in one place. So, how can B tell A via RIPv2 to send packets for 10.20.20.5/32 to C? So far it looks like I need no ip split-horizon on router B's 10.1.1.2 interface, perhaps because B has already learned from C other routes with a next hop of 10.1.1.3. But how does RIPv2 split horizon with no auto-summary and network 10.0.0.0 really work? If B learns a route to ANY 10.x.x.x network or host from A or C, is that enough for split horizon to keep it from redistributing ip route 10.20.20.5 255.255.255.255 10.1.1.3? And if I want to suspend split horizon only for this one new host, how do I filter out the mess of regurgitated routes that B advertises when I try no ip split-horizon? Thanks much.

  Read the article

• Domain with www pointing yo another site

  - by ntechi

  Recently I started Multi Sites on my VPS which is having Centos 64 bit. Currently I am having two sites live and each is working fine, Now the problem is in the URL I have the following sites: http://mbas.co.in http://u-k.in mbas was the very first site on my VPS Now in URL if I type http://mbas.co.in or http://www.mbas.co.in both redirect to my mbas website But for the second website, If in URL I type http://u-k.in then it redirects to the u-k website correctly but if I type http://www.u-k.in then it redirects me to mbas website. You can try that I have configured my DNS in this way, see the image http://i55.tinypic.com/14vlpxl.jpg And my Multi Site code is this <VirtualHost *:80> ServerAdmin [email protected] DocumentRoot /var/www/html/www.mbas.co.in ServerName mbas.co.in ErrorLog logs/mbas.co.in-error_log CustomLog logs/mbas.co.in-access_log common </VirtualHost> <VirtualHost *:80> ServerAdmin [email protected] DocumentRoot /var/www/html/u-k.in ServerName u-k.in ErrorLog logs/u-k-error_log CustomLog logs/u-k-access_log common </VirtualHost>

  Read the article

• How can I calculate power consumption of my PC in Watt?

  - by Jitendra vyas

  How can I calculate power consumption of my PC in Watt, to prove my House owner ( I live on rent) , my PC doesn't consume much power? He blames me for Huge power bills even he too use Fridge, A.C. etc and his son watch the TV all the time. We both share one Power meter so for bill we pay 50%-50% but He is saying I use PC all the time even night i keep on for downloading. I just want to calculate power consumption of my PC then will calculate monthly expense of unit as per my City's per unit price for power. I've Windows: Microsoft Windows XP Professional 5.1.2600 Service Pack 3 Memory (RAM): 960 MB CPU Info: AMD Sempron(tm) Processor 2500+ CPU Speed: 1399.0 MHz Sound card: Vinyl AC'97 Audio (WAVE) Display Adapters: VIA/S3G UniChrome Pro IGP | NetMeeting driver | RDPDD Chained DD Monitors: 1 - 17inch LCD - LG Screen Resolution: 1280 X 768 - 32 bit Network: Network Present Network Adapters: Bluetooth Device (Personal Area Network) #2 | WAN (PPP/SLIP) Interface CD / DVD Drives: I: ELBY CLONEDRIVE COM Ports: COM1 | COM2 | COM7 | COM8 | COM9 | COM10 LPT Ports: LPT1 Mouse: 3 Button Wheel Mouse Present Hard Disks: C: 29.3GB | D: 29.3GB | E: 97.7GB | F: 97.7GB | G: 211.9GB USB Controllers: 5 host controllers. Firewire (1394): 1 host controllers. Manufacturer: Phoenix Technologies, LTD Product Make: MS-7142 AC Power Status: OnLine BIOS Info: AT/AT COMPATIBLE | 01/18/06 | VIAK8M - 42302e31 Motherboard: MICRO-STAR INTERNATIONAL CO., LTD MS-7142 Modem: ZTE USB Modem FFFE CDMA #2

  Read the article

• Java Plugin a huge security risk? How to preseve Java plugin from privilege escalation?

  - by Johannes Weiß

  Installing a regular Java plugin is IMHO a real security risk for non-IT people. Normally Java applets run in a sandbox and the applet cannot do anything harmful to your computer. If an applet, however, needs to do something like read-only accessing your filesystem e.g. uploading an image, you have to give it more privileges. Usually that's ok but I think not everyone knows that you give the applet the same privileges to your computer as your user has! And that's everything Java asks you: That looks as 'harmful' as a self-signed SSL certificate on a random page where no sensitive data is exchanged. The user will click on Run! You can try that at home using JyConsole, that's Jython (Python on Java)! Simply type in python code, e.g. import os os.system('cat /etc/passwd') or worse DON'T TYPE IN THAT CODE ON YOUR COMPUTER!!! import os os.system('rm -rf ~') ... Does anyone know how you can disable the possibily of privilege escalation? And by the way, does anyone know why SUN displays only a dialog as harmless as the one shown above (the self-signed-SSL-certificate-dialog from Firefox 3 and above is much clearer here!)? Live sample from my computer:

  Read the article

• Virutal Machine loses network connectivity on Hyper V Cluster

  - by Chris W

  We're running a number of VMs on a 6 node failover cluster of blades using Hyper V. We have an intermittent issue (every few days at different times - not a fixed frequency) of VMs losing network connectivity. Console access to the VM suggests all is fine and the underlying blade has normal connectivity. To resolve the problem we either have to re-start the VM or, more usually, we do a live migration to another blade which fires up connectivity and we then migrate it back to the original blade. I've had 3 instances of this happen with a specific VM running on a particular blade however it has happened once with a different VM running on a different blade. All VMs and blades have the same basic setup and are running Windows 2008 R2. Any ideas where I should be looking to diagnose the possible causes of this problem as the event logs provide no help? Edit: I've checked that each blade is running the latest NIC drivers and all seem to be fine. Something that is confusing me - a failover or restart of the VM resolves the issue. Whilst I need to work out the underlying issue that is causing the NICs to hang I'm also concerned that the VM didn't failover to another node which would have solved the outage for me. Is there a way to configure the cluster so that it can tell that the VM guest has lost connectivity and fail it over? As things stand the cluster is assuming that the VM is running happily as I presume Hyper V says everything is great even though there is a problem.

  Read the article

• HLS video segmenting complications. How to create a transport stream with ffmpeg

  - by Agzam

  I have h264 videos, and currently we're using Apple's HTTP Video Streaming tools and mediafilesegmenter to segment these files. What I need to do is to switch to alternative segmenter based on this very popular open-sourced segmenter The problem is that this segmenter does not just take any video, but takes only MPEG-TS videos. So I have to convert my h264 videos to TS first. I can do that with ffmpeg. I'm using this: ffmpeg -i encoded.mp4 -vcodec h264 -i encoded.mp4 -sameq -acodec aac -strict experimental -f mpegts output.ts But this creates fairly larger output. And the reason is that Apple's segmenter keeps the same codec - AVC and the same audio codec - AAC, whereas ffmpeg changes video format to MPEG Video. The question is: can I somehow keep the same AVC video codec and still convert video to a transport stream? So my goal is to keep the same video quality and same video codecs as Apple's medifilesegmenter does. UPD: Okay... it seems that ffmpeg CAN split videos into segments: ffmpeg -i encoded.mp4 -c copy -map 0 -vbsf h264_mp4toannexb -f segment -segment_time 10 -segment_list test.m3u8 -segment_format mpegts segment%d.ts That's still has one problem: it doesn't create http live streaming index file. (-segment_list creates a file with list of segments, but it doesn't look like HLS index). So, you still have to create index file

  Read the article

• Two hosting providers running simultaneously... possible / not possible? good practice / unnecessary?

  - by user29600

  For the sake of their reputation, I won't mention the names. But I'll just use: Business I worked for previously - ABC Web Dev Hosting company they used - XYZ Hosting I recently found out that XYZ Hosting had some sort of incident where they ended up losing a lot of their client's data - including ABC Web Dev's. ABC Web Dev was able to recover some of their customer's websites, after pulling them from their local development computers and putting them up on another hosting provider. They ended up losing a lot of clients because of it and their reputation ruined. I'm starting my own web dev company and I don't want to run into this same issue. I'm planning on using Rackspace but, although they are a great company, according to wikipedia they still have had downtime in their past. I thought it might be a good idea to try to run two providers at once, to ensure that if anything happened in one the websites would still be live because of the other. I know the websites would have to be pulling from one server at all times, but if there's a way to redirect requests to the second server if the first one is down that would solve my issue. As a note, we will have a staging environment setup locally which will allow for quick recovery if a provider did have any issues, however I'd like to avoid any downtime at all if possible. So my questions are: Has anyone tried running two providers simultaneously? Would this be considered good practice or am I going too far? Is there really any way to run two simultaneously where one server acts as a backup?

  Read the article

• Cisco SG 300-28P PoE switch appears to have damaged my domain server's network IF

  - by cdonner

  I just replaced the old HP ProCurve switch with a new Cisco SG 300-28P managed switch. It has PoE on all ports. Everything works, except for my domain server that went offline and the network interface appears to be dead. Windows says the network cable is disconnected, and no lights blink on the switch. Tried different cables and different ports on the switch. The Cisco PoE ports are supposed to be auto-sensing, i.e. not to send power to a device that cannot handle it. Is this technique not 100% reliable? The server is a SHUTTLE XS35V2 with an onboard network chip, so it is probably fried. My questions: is this plausible? who's fault is it - Shuttle or Cisco (i.e. which support line should I try first)? UPDATE: I did go back and tried another switch between the server and the Cisco switch, and indeed, the connection came back to live. When everything is powered down and I start fresh, with the server connected to the Cisco switch, the port light will blink for a while and the connection status is "No Internet connection" at first until it goes off after about 20 seconds and the connection status changes to "Network cable disconnected". On the other switch it works. Clearly not a PoE issue now. I will start looking into the Cisco's onboard diagnostic functions, but so far I have not noticed anything unusual in the log.

  Read the article

• Play audio over network with Windows 7?

  - by Josh

  I have a unique situation where I'd like to stream audio (ALL audio, not just mp3s, etc) from my laptop to another computer over the network. I live in a studio apartment and my laptop is my main computer but I'd like it's audio to play on my htpc with a nice stereo system. Since it's a studio, both computers are in the same room so I don't want 2 sets of speakers. I want my computer to directly play back through the stereo. I used to do this with pulseaudio but my job now requires that I run Windows full time. I'm aware of Shoutcast and other similar streaming solutions but I don't want any transcoding done. It's a waste of CPU and not to mention my laptop fans, and I don't mind the network bandwidth that uncompressed audio requires. Is there a way to run Shoutcast without encoding? Also, I know that Windows Remote Desktop can play audio over the network pretty easily. Is this part of .Net that I could just code a simple app that streams the audio without RD'ing in? I also don't want to run it over a physical wire. :)

  Read the article

• Why does nmap ping scan over a VPN link return all hosts alive?

  - by ewwhite

  I'm curious as to why running an nmap -sP (ping scan) on a remote subnet linked via a Cisco site-to-site IPSec tunnel returns "host up" status for every IP in the range. [root@xt ~]# nmap -sP 192.168.108.* Starting Nmap 4.11 ( http://www.insecure.org/nmap/ ) at 2012-11-22 14:08 CST Host 192.168.108.0 appears to be up. Host 192.168.108.1 appears to be up. Host 192.168.108.2 appears to be up. Host 192.168.108.3 appears to be up. Host 192.168.108.4 appears to be up. Host 192.168.108.5 appears to be up. . . . Host 192.168.108.252 appears to be up. Host 192.168.108.253 appears to be up. Host 192.168.108.254 appears to be up. Host 192.168.108.255 appears to be up. Nmap finished: 256 IP addresses (256 hosts up) scanned in 14.830 seconds However, a ping of a known-down IP simply times out or doesn't return anything... [root@xt ~]# ping 192.168.108.201 PING 192.168.108.201 (192.168.108.201) 56(84) bytes of data. --- 192.168.108.201 ping statistics --- 144 packets transmitted, 0 received, 100% packet loss, time 143001ms Is there a more effective way to scan live devices connected in this manner?

  Read the article

• "A disk read error occurred" when booting XP disk image in VirtualBox

  - by intuited

  I'm trying to boot an XP installation cloned into VirtualBox from a real drive. I'm getting the message A disk read error occurred Press Ctrl+Alt+Del to restart whenever* I try to boot the machine. * This is not strictly true: with AMD-V enabled, the boot process appears to not make it this far and instead hangs at a black screen with cursor. I created the VirtualBox image from the original drive using the following method: $ sudo ddrescue -n /dev/sdd sdd.img logfile # completed without errors $ VBoxManage convertfromraw sdd.img disk.vdi The original disk (and the image) contain a single NTFS partition with XP installed on it. The owner of the drive indicates that it did boot okay the last time the system made it that far. The (Pentium 4) system has a broken (enormous) heat sink, so at some point it failed to boot because it would quickly overheat and shut down. If I boot the VM from a live cd, I am able to mount its /dev/sda1 without any problems. I ran ntfsfix and didn't have any luck. I've read through the instructions on doing this. I didn't really follow them. For example, I didn't run MergeIDE before imaging because the machine was not bootable. However, the symptom of that problem seems to be quite different. The emitted message is contained in the volume boot record of the XP partition, which leads me to suspect that this is a problem with the core operating system bootstrap procedure, and not related to anything in the registry. I don't have an XP boot CD.

  Read the article

• client flips between internal and external IP addresses??

  - by jmiller-miramontes

  I have what seems like a not-particularly-complicated home network, all things considered: a DSL line comes in to a modem/router, which goes off to a switch, which supports a bunch of machines. My machines live in a 192.168.0.x address space; however, I'm running some public servers on the network, so I have a block of 8 (5, really) static IP addresses that are mapped to the servers by the router. The non-servers get 192.168.0.x addresses via NAT; some machines have static addresses and some get addresses from DHCP. Locally, I'm running a DNS server (named) to map between the domain names and the 192.168 address space. Somewhat messy, but everything basically works. Except: One of my local non-server clients occasionally switches from its internal address to its external address. That is, if I check the logs of a website I'm running internally, the hits coming from this client sometimes show up with the internal 192.168 address, and sometimes with the external (216.103...) address. It will flip back and forth for no apparent reason, without my doing anything. This can be a problem in terms of how the clients interact with the way I have some of the clients' SSH systems configured (e.g., allowing access from the internal network but not the external network), but it also Just Seems Wrong. I will confess that I'm kinda skating on the very edge of my networking competence here, but I can't for the life of me figure out what's going on. If it helps, the client in question is running Mac OS X / 10.6; its address is statically assigned, is not one of the five externally-accessible addresses, and gets its DNS from (first) the internal DNS server and (second) my ISP's DNS servers. I can't swear that none of the other NAT clients are also showing this problem; the one I'm dealing with is my everyday machine, so this is where I run into it. Does anybody out there have any advice? This is driving me crazy...

  Read the article

• Increasing SQL Server / Sage performance with SSD? (Dell PE T410)

  - by Anthony

  I have a client wanting better performance of their Sage (Accpac & CRM) server (v5.5, soon to be v7). It's running on 1 of 2 Hyper-V VMs (Svr2008) on a Dell PE T410 server with 24GB of RAM (1333MHz) & dual quad-core, and both VMs (only their C: drives) are on a single RAID5 array. All clients connect via 1Gb ethernet. The 2nd VM is SBS2008 with 9GB RAM (& all SBS dbs & company data are on a separate RAID5 array), & 3GB RAM for the Svr2008 hypervisor. I've given the Sage/SQL Server VM all the RAM I can (12GB) & SQL Server RAM caching (~8GB, never exceeds ~7.5GB, eg. entire db can now be cached in RAM) and that's helped significantly. Upgrading the Hypervisor to Svr2012 is an obvious step, but probably not a dramatic improvement? What about an SSD for this Sage/SQL Server VM (VM = 100GB, <10GB for the actual live DB) ? Can SSDs be put into the SAS hot-swap bays? Or will I have to use the mobo SATA(3Gbps?) ports, or PCI-E SSD card? Should SSDs be RAIDed for this situation? Or is SSD's higher reliability offsetting the need for RAID1/5/10? (I have nightly full disk backups) New territory for me, would appreciate some feedback. Thanks, Anthony.

  Read the article

• Htpc aka "Media Center": cheap and *silent*?

  - by Unknown

  It may be me, or the place I live (Italy), but it seems pretty hard to get a build or a prebuilt nettop or a laptop that fits the need. I need something silent able to playback all h.264 fullhd content without stuttering, and well (and not loosing the hw acceleration because of softsubs...) silent not ugly silent and (possibly) cheap. I'm going the linux route, therefore i'm moving towards a cpu-based or nvida-integrated solution (i don't think ati hw accelerated playback - or the intel "hd" acceleration - is useable yet). Ion nettop; it's either the Acer Revo (but here it's incredibly pricey and it's hard to find the dualcore version) or the Asrock Ion 330, that in the current version is rated "silent" at 26Db. 26. Sounds pretty noisy to me!!! the previous version was even worse. was this product really aimed at htpc market?? the Dell Zino - i think it's ATI based unfortunately. Laptop: correct me if I'm wrong: sub 600€/$ units are quite loud under full load (because of the tiny fans). ULW laptops are indeed quite similar: tiniest fans = high pitched noise and the cpu still lacks power for non hd-accelerated video decoding Handmade build: little money can be saved with underpowered cpus, a low-midrange cpu would help in the case of non-hw-accelerated content the cases are quite pricey the PSU one has to get ranges between 100/150 €/$ minimum to keep the noise down a low-mid build, all included, sums up to over 650 €/$ for a still-looking-ugly-unit, without the blu-ray drive. Please help. What do you advise on this? ;) Am I ignoring laptops too much, maybe? Are low-priced Acers that noisy/high pitched under full load?

  Read the article

• BSOD trying to migrate Windows XP from a physical to a virtual machine

  - by pauldoo

  I am attempting to migrate a Windows XP Home installation from a physical machine to a virtual machine. The physical machine has two hard disks; the first is 250GB containing the "C:", the second is 1TB containing "D:". I'd like to create a new virtual machine stored on the D:, which is a copy of the Windows XP Home installation that is currently on the C:. (This will leave the 250GB drive clear for me to install a fresh copy of Windows 7, and still be able to access the old XP installation if necessary.) The first method I tried was to follow the instructions here: http://www.virtualbox.org/wiki/Migrate_Windows I booted up from an Ubuntu Live CD in order to execute the Linux commands whilst the Windows system wasn't running. With this method the virtual machine would always blue screen on startup with a "STOP 0x0000007B" message. The instructions above say to try a "repair install" using the Windows XP disc. Unfortunately for me my XP disc is scratched and will not boot so I was unable to try a repair install. The second method I tried was to use "VMWare Converter Standalone Client". This tool executed without any errors, but again produced a virtual machine that blue screens on startup with the same "STOP" message. Are there any other methods to move the Windows XP installation into a virtual machine? I think next I will try some more manual process to create the cloned virtual machine. I think I will try installing a fresh copy of Windows XP to a virtual machine, then once that is booting OK I will ntfsclone the source C: partition over the top. Perhaps this will fix the booting problems if the issue is related to the MBR or partition table in some way.

  Read the article

• How to bypass resume from hibernate

  - by Daniel Trebbien

  I am attempting to resume a Windows Vista laptop from hibernate, but the resume process seems to be stuck in an endless loop in which Windows is repeatedly trying to read from the optical drive. When I press the Power On button on the laptop, the screen is black (not even the backlight turns on) and the following occurs in a loop: Five seconds pass and I hear the optical drive being accessed. (There's no disk in the drive, so it sounds like a short buzzing noise.) Two seconds pass and I hear the optical drive being accessed. Two seconds pass and I hear the optical drive being accessed. So it's three short buzzing noises in a row, over and over again. Eventually I have to abruptly power off the machine. I have tried inserting a data CD into the drive as well as a bootable CD (a live Linux distro boot disk). For both, the optical drive spins up for a bit, but stops after Windows decides that the disk is not what it is looking for. I have since lost the Windows Vista recovery DVD, but I don't know if inserting the recovery disk into the optical drive would have a different effect than the bootable CD. I have tried pressing F8 immediately after pressing the Power On button (hoping to enter System Restore), but that did not have an effect. Is there a special key sequence that will cause Windows to bypass resuming from hibernate, effectively ignoring hiberfil.sys?

  Read the article

• Windows 7 Apache Crashes on ANY request

  - by Dan

  I have XAMPP installed. I am running Windows 7. I have WordPress installed so that I may tweak it and test things locally before putting them 'live' on a remote server. I just installed BuddyPress. The installation was rather seamless. I activated the plugin and almost immediately, Apache crashed. I have Apache running as a service so it immediately restarted itself and was running BUT if I even so much as refresh the page (or create any other request), down it goes. Listed here is the error report as generated by Windows 7: Problem signature: Problem Event Name: APPCRASH Application Name: apache.exe Application Version: 2.2.4.0 Application Timestamp: 45ebef86 Fault Module Name: ZendOptimizer.dll Fault Module Version: 0.0.0.0 Fault Module Timestamp: 45ea8fee Exception Code: c0000005 Exception Offset: 0004dc22 OS Version: 6.1.7600.2.0.0.256.1 Locale ID: 1033 Additional Information 1: 1ec0 Additional Information 2: 1ec0fd70d07d060e5bfcf53c69ad1739 Additional Information 3: 2c48 Additional Information 4: 2c48940de5e7d1cb2e131ad6a0ca2feb Read our privacy statement online: http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409 If the online privacy statement is not available, please read our privacy statement offline: C:\Windows\system32\en-US\erofflps.txt Help?

  Read the article

• EEE PC Keyboard malfunctioning - Ctrl key "sticks" after 10 seconds

  - by DWilliams

  I was given a EEE PC belonging to a friend of a friend to fix. The keyboard did not appear to work at all. I spent a while testing out various things, blowing the keyboard out, checking for damage, and so on. Nothing appeared to be physically wrong. At first I noticed that the keyboard appeared to work just fine for 10 seconds (on average, sometimes more sometimes less) after being powered on. It had been restored to the factory default xandros installation with no user set up, so I couldn't get in to mess with things since I couldn't type to make a user. I made an ubuntu live USB to boot it from, and managed to get the boot order changed to boot from USB in the ~10 seconds of working keyboard I had (I don't think I've ever had to rush around BIOS menus that quickly). After I got Ubuntu up on it, I played around a bit more and determined that apparently the ctrl key is stuck down (not literally, but it's on all the time). If I open gedit, pressing the "o" key brings the open dialog, "s" opens the save dialog, and all other behaviour you would expect to see if you were holding down the control key. The only exception that I noticed is the "9" and "0" keys. They function normally. Figuring that out I made a xandros user with a name/password consisting of 9's and 0's. I couldn't find any options in Xandros that could potentially be helpful. I'm not familiar with EEE PCs. Is it safe to assume that the keyboard is simply dead or could there be another problem? I don't want to purchase another keyboard for him if that isn't going to fix the problem. The netbook doesn't show any obvious signs of damage but the owner is a biker and very often has it with him on the road so it's been subjected to a good bit of vibration.

  Read the article

• Increasing MSSQL/Sage performance with SSD? (Dell PE T410)

  - by Anthony

  I have a client wanting better performance of their Sage (Accpac & CRM) server (v5.5, soon to be v7). It's running on 1 of 2 Hyper-V VMs (Svr2008) on a Dell PE T410 server with 24GB of RAM (1333MHz) & dual quad-core, and both VMs (only their C: drives) are on a single RAID5 array. All clients connect via 1Gb ethernet. The 2nd VM is SBS2008 with 9GB RAM (& all SBS dbs & company data are on a separate RAID5 array), & 3GB RAM for the Svr2008 hypervisor. I've given the Sage/MSSQL VM all the RAM I can (12GB) & SQL RAM caching (~8GB, never exceeds ~7.5GB, eg. entire db can now be cached in RAM) and that's helped significantly. Upgrading the Hypervisor to Svr2012 is an obvious step, but probably not a dramatic improvement? What about an SSD for this Sage/SQL VM (VM = 100GB, <10GB for the actual live DB) ? Can SSDs be put into the SAS hot-swap bays? Or will I have to use the mobo SATA(3Gbps?) ports, or PCI-E SSD card? Should SSDs be RAIDed for this situation? Or is SSD's higher reliability offsetting the need for RAID1/5/10? (I have nightly full disk backups) New territory for me, would appreciate some feedback. Thanks, Anthony.

  Read the article

• Using bind (named) as a public proxy server

  - by TrentDavis

  We have a Python DNS server that does a bunch of stuff to figure out values it should return for various DNS records. This works nicely, however as it is Python, the performance under high load won't be great. What I would like to do is have a "proxy" bind server sit in front of it to return results to the public internet. This will cache the results (typically 15 minutes, some records are a few seconds), so the load on the Python server will be greatly reduced as it will only see one look up per domain (only about 100 domains) every 15 minutes. The data in these domains changes a lot, so using a master won't work as it will constantly be changing. I have something setup that looked like it would work great (using a forwarder for the zone), and tested it with dig etc, all going great. However when we went to go live with it, things weren't working, and we figured out that named is not setting the "Authoritative" bit (fair enough, it is a forwarder). So my question is, can we tell bind to set the Authoritative bit for forwarded domains? I have looked at all the doco I can find, and can't find anything about doing things this way. Most of the doco about using it as a proxy if for a LAN to the internet. Ideally I would like to use bind as it is there and installed (CentOS 5 servers). But at a pinch we could look at a different name server to do the work if it just can't be done with bind. Thanks.

  Read the article

• Install Ubuntu 10.10 from loopback mounted ISO image

  - by Zifre

  I have a laptop with a faulty BIOS that has stopped booting from CDs even though it supports it (and it doesn't support booting from USB drives). I am trying to install Ubuntu 10.10 on it. I already had 9.10 installed. I tried using Kexec, but it refused to accept the kernel image. Eventually I found this page which shows how to make GRUB 2 boot from an ISO file. That worked fine, and I am now running the live image from the file. (If I can get this to work, it will be my new preferred way of installing Ubuntu, as it saves CDs and boots much faster.) However, I can't install it. The installer won't make changes to the hard drive, because the partition containing the ISO is mounted (and can't be unmounted because it is in use). Even if I only choose to use other partitions that are not mounted, the installer refuses to go any farther. Clearly, it should be possible using other partitions on the same disk. Is there any way to work around this issue or force the installer to go ahead?

  Read the article

< Previous Page | 278 279 280 281 282 283 284 285 286 287 288 289  | Next Page >