Search Results

Search found 18396 results on 736 pages for 'oracle policy administration'.

Page 282/736 | < Previous Page | 278 279 280 281 282 283 284 285 286 287 288 289  | Next Page >

  • Where in the stack is Software Restriction Policies implemented?

    - by Knox
    I am a big fan of Software Restriction Policies for Microsoft Windows and was recently updating our settings for this. I became curious as to where Microsoft implemented this technology in the stack. I can imagine a very naive implementation being in Windows Explorer where when you double click on an exe or other blocked file type, that Explorer would check against the policy. I call this naive because obviously this wouldn't protect against someone typing something in a CMD window. Or worse, Adobe Reader running an external application. On the other hand, I can imagine that software restriction policies could be implemented deep in the stack almost at the metal. In this case, the low level loader would load into memory the questionable file, but mark the memory in the memory manager as non-executable data. I'm pretty sure that Microsoft did not do the most naive implementation, because if I block Java using a path block, Internet Explorer will crash if it attempts to load Java. Which is what I want. But I'm not sure how deep in the stack it's implemented and any insight would be appreciated.

    Read the article

  • Cisco ASA 5510 Time of Day Based Policing

    - by minamhere
    I have a Cisco ASA 5510 setup at a boarding school. I determined that many (most?) of the students were downloading files, watching movies, etc, during the day and this was causing the academic side of our network to suffer. The students should not even be in their rooms during the day, so I configured the ASA to police their network segment and limit their outbound bandwidth. This resolved all of our academic issues, and everyone was happy. Except the resident students. I have been asked to change/remove the policing policy at the end of the day, to allow the residents access to the unused bandwidth at night. There's no reason to let bandwidth sit unused at night just because it would be abused during the day. Is there a way to setup Time of Day based Policies on the ASA? Ideally I'd like to be able to open up the network at night and all day during weekends. If I can't set Time based policies, is is possible to schedule the ASA to load a set of commands at a specific time? I suppose I could just setup a scheduled task on one of our servers to log in and make the changes with a simple script, but this seems like a hack, and I'm hoping there is a better or more standard way to accomplish this. Thanks. Edit: If there is a totally different solution that would accomplish a similar goal, I'd be interested in that as well. Free/Cheap would be ideal, but if a separate internet connection is my only other option, it might be worth fighting for money for hardware or software to do this better or more efficiently.

    Read the article

  • How can I make WSUS less invasive for our users?

    - by Cypher
    We have WSUS pushing updates out to our user's workstations, and things are going relatively well with one annoying caveat: there seems to be an issue with a pop-up being displayed in front of some users informing them that their machine will be rebooted in 15 minutes, and they have nothing to say about it: This may be because they did not log out the prior night. Nevertheless, this is a bit too much and is very counter-productive for our users. Here is a bit about our environment: Our users are running Windows XP Pro and are part of an Active Directory Domain. WSUS is being applied via Group Policy. Here is a snapshot of the GPO that is enforcing the WSUS rules: Here is how I want WSUS to work (ideally - I'll take whatever can get me close): I want updates to automatically download and install every night. If a user is not logged in, I would like the machine to reboot. If a user is logged in, I would like their machine not to reboot, but instead wait until the next "installation period" where it can perform any other needed installations and reboot then (provided the a user account is not still logged in). If a user is to be prompted for reboot, it should only happen once per day (if possible), but every time they are prompted, they must have a way to postpone the reboot. I do not want users to be forced to restart their computer whenever the computer thinks it should happen (unless it's after an update installation and there are no logged in users). That doesn't seem productive to force a system restart in the midst of a person's workday. Is there something that I can do with the GPO that would help make WSUS less intrusive? Even if it gave the user an option to Restart Later - that would be better than what is happening now.

    Read the article

  • Change default profile directory per group

    - by Joel Coel
    Is it possible to force windows to create profiles for members of one active directory group in a different folder from members in another active directory group? The school here uses DeepFreeze to protect public computers. In a nutshell, DeepFreeze prevents all changes to a hard drive such that every time you restart the machine the disk is identical to it was at the time you froze it. This is a bit different than restoring to an image, in that it never really wrote changes to disk in a permanent way in the first place. This has a few advantages over images: faster recover times, and it's easy to thaw the machine for a few minutes to perform maintenance such as windows updates (which can even be automated). DeepFreeze also allows you to configure a "thawspace" partition, where changes are persistent across reboots. One of the weaknesses of DeepFreeze is that you end up needing to create a new profile every time you log in, unless your profile existed at the time the machine was frozen. And even then, any changes you make to your profile while working on a frozen machine are lost. As students have frequent legitimate needs to log in to our classroom machines, there is currently a lot of cleanup involved from time to time in removing their old profiles and changes, so I want to extend DeepFreeze to protect our classroom computers as well as public computers. The problem is that faculty have a real need to keep a stateful profile locally on these classroom computers. The solution I would like to use is to configure Windows via group policy (or even manually, if that's the way I'll have to do it) to place profile folders on the thawspace partition, but only for members of the faculty security group. Is this possible?

    Read the article

  • Users and Groups management on 7 Home Premium

    - by AviD
    Recently upgraded the home pc from XP pro, to Windows 7 Home Premium. I'm looking for a solution for a few things that seem to be missing from this edition... Since Local Users and Groups is blocked on Home Premium, I can't figure out how to manage groups, or even do anything even slightly advanced to users (basically, create/group/picture is it). net localgroup, net users, net etc dont seem to work - getting "system error 5". While I'm on the topic, I cant activate (what was once) "Local Security Policy"... Looking for any help, advice, or even a new direction cuz things is differ'nt on Winnows7... To clarify, I'm looking to do some of the following, which were simply back in XP-land: remote user only (i.e. no local logon) Grant special privileges for specific user grant access to e.g. C$ share for specific remote user create custom groups for users, to be able to separate privileges of say, my wife's from my kids define quite specifically what each user can do (beyond just standard users) Harden OS (hmm, i guess maybe what i'm looking for is security hardening guide for 7...?)

    Read the article

  • Single Sign On 802.1x Wireless - saying “Connecting to <SSID>”, hangs for 10 seconds, fails with “Unable to connect to <SSID>, Logging on…”.

    - by Phaedrus
    We are implementing WiFi on Windows 7 machines in our corporate environment. Machines should be able to log into the domain by WiFi as the Machine (Pre-Logon), and as the User (Post-Logon). We have everything working correctly except for 2 things: 1) Sometimes the login scripts don't run 2) The user VLAN is sometimes different than the machine vlan, and no DHCP renew occurs after user logon. I am clear that both these problems should be fixable by using the "Single Sign On" Option under the 802.1x Wireless Vista GPO, and setting the wireless to connect immediately before user logon and also by enabling "This network uses different VLAN for authentication with machine and user credentials" If I enable these GPO settings in a lab, the computer does authenticate & gets WIFI before the user logs on, so when the login box is displayed, it says “Windows will try to connect to ”, even though it is already connected (which should be ok?). Enter the user credentials and it goes to a screen saying “Connecting to ”, hangs for 10 seconds, fails with “Unable to connect to , Logging on…”. Desktop fires up and then the user re-authenticates with no problem as himself instead of the machine, but by that point, we defeat the point of the WiFi SSO “before user logon”. Also by that point, no DHCP renew seems to occur, and the user is still stuck with the wrong IP address for the new VLAN. When the “Connecting to ” screen comes up, there’s no indication on the AP or the Radius server that anything whatsoever is happening after credentials are entered until after the domain logon. Also with this policy enabled, sometimes windows hangs on a black screen indefinitely until I disable the Wireless NIC, so something is knackered for sure. What have I missed? Suggestions are much appreciated... /P

    Read the article

  • How to script GPO in Windows computers without Active Directory?

    - by Peteris Krumins
    Does anyone know how to script GPO for users in a Windows computer that is not on any Active Directory network? I can't use GPMC because it doesn't work without a domain. I have been searching the net for the last couple of hours and all the solutions that I find are related to GPMC. I'd imagine there are some objects in the GPO that are accessible via WMI? Does anyone know anything about that? I was unable to find any information about that. Here is the situation I am trying to script: I have 10 users on the machine, and I want to restrict what they are able to do on the machine. So I created 10 GPOs for each one of them. Now I want to apply a common policy to all of them. The only way to do it is to go through each of the GPO and do it manually. This is too time consuming, therefore I am seeking for a simpler solution. I was unable to find a way to copy GPO from a user to a user. That would make it much easier, I would create a GPO for 1st user, then copy it over to all the other users, but no luck, couldn't find a way to copy GPOs. The other method I tried was creating a GPO for the whole user group but it turns out you can't apply GPO to a group unless you use GPMC, which I can't cause the computer is not on any domain. So I am thinking about scripting this whole process, but again I can't find any examples of how to access particular GPO objects for particular users and modify properties through WMI. Any suggestions on the issue I am having? Thanks!

    Read the article

  • Provide a user with service start/stop permissions

    - by slakr007
    I have a very basic domain that I use for development. I want to create a GPO that provides users in the Backup Operators group with start/stop permissions for two specific services on a specific server. I have read several articles about this, and they all indicate that this is very easy. Create a GPO, give the user start/stop permissions to the services under Computer Configuration Policies Windows Settings Security Settings System Services, and voila. Done. Not so much, but I have to be doing something wrong. My install is pretty much the default. The domain controller is in the Domain Controllers OU, the Backup Operators group is under Builtin, and I created a user called Backup under Users. I created a GPO and linked it to the Domain Controllers OU. In the GPO I give the Backup user permission to start/stop two specific services on the server. I forced an update with gpupdate. I used Group Policy Results to verify that my GPO is the winning GPO giving the user the permission to start/stop the two services. However, the user is still unable to start/stop the services. I attempted different loopback settings on the GPO to no avail. I'm sort of at a loss here.

    Read the article

  • ready and opensource admin area

    - by Luca
    hi! :) i'm searching for a ready-for, opensource administration area, wich allow me to modify it. the area could be already available for a gallery, uploading of images, user managment, news and so on... anyone can help me? do you know something similar? thanks a lot in advance!

    Read the article

  • Unable to back up SQL Server databases using a maintenance plan

    - by Stephen Jennings
    I am trying to create a maintenance plan that will run automatically and back up my SQL Server 2005 databases automatically. I create a new maintenance plan and add a "Back Up Database Task", select all databases, and choose a path to back up to. When I save and try to execute this plan, I get the following error message: =================================== Execution failed. See the maintenance plan and SQL Server Agent job history logs for details. =================================== Job 'Backup.Subplan_1' failed. (SqlManagerUI) ------------------------------ Program Location: at Microsoft.SqlServer.Management.SqlManagerUI.MaintenancePlanMenu_Run.PerformActions() I've checked the maintenance plan log, the agent log, and just about every log file I can find and there are no entries at all to help me figure out why this is failing. If I right-click on a specific database and select "Back Up", the task succeeds. I tried changing the plan to back up just that one database and it still failed. I've tried running the plan with both Windows authentication and SQL Server authentication with the sa account. I also tried specifically granting the SQL Server Agent user account full privileges on the backup folder, but it still failed. While searching the web for clues, the only solution I've run across so far suggests running sp_configure 'allow_update', 0. I tried this but allow_update was already set to 0 and it did not fix the problem. The Windows server and SQL Server have all updates applied to them. Thanks for any suggestions!

    Read the article

  • How to use Salt Stack with minions all behind NAT (not publicly accessible, default salt ports not open)?

    - by MountainX
    Can Salt Stack minions communicate with the salt master from behind NAT/Firewalls, etc., using standard ports that would be open be default in all consumer NAT routers (and without the minions having a public DNS record or static IP)? I'm working my way through my first salt tutorial, and this is where I'm stuck. I am able to configure iptables on the Ubuntu salt-master. But I have no control over the routers/NAT that the minions will sit behind. So far I tried these settings: /etc/salt/master: publish_port: 465 ret_port: 443 /etc/salt/minion: master_port: 465 That did not work. Background: I have a custom developed application presently running on about 40 Kubuntu laptops (& more planned). Every few months I have to update the application. (Often this just amounts to replacing a .jar file, which requires root permissions.) I also have to run Ubuntu updates and a few other minor things. I've been doing it manually, one by one, using Team Viewer to log into each client. I would like to dramatically improve this process. The two options I'm aware of are either: use reverse ssh tunnels and bash scripts. I tested this and it works. But I don't get any of the reporting, etc., I would get with Salt Stack. use Salt Stack (or similar) management tool. But I need a really simple tool. I can't invest any time in a big learning curve. I looked at Puppet and a bunch of related tools. The only one I found that looked simple enough for me (so far) was Salt Stack. But I'm stuck now because my minion can't reach the salt-master, as stated above. I appreciate suggestions.

    Read the article

  • Linux Alternatives to Lansweeper [on hold]

    - by Mathew MacLean
    I'm new to serverfault, and I'm hoping that this is the correct section of StackExchange for this question. Currently in my network we have a collection of linux fileservers, firewalls, etc. with all windows clients. I am looking for a network management tool, similar to lansweeper that would be able to run on linux servers. I know questions asking for software suggestions are typically frowned upon, but I have looked high and low, and I'm starting to think nothing like this exists. So if anyone could point me in the right direction it would be greatly appreciated!

    Read the article

  • SQL 2008 Database tuning advisor won’t start

    - by Andrew Hancox
    For some reason I can't get DTA to connect to my development machine. It connects to a remote DB just fine but when I point it to my dev machine I get an error saying: Failed to initialize MSDB database for tuning (exit code: -1073741819). I'm pretty sure it's not a permissions issue since I've used profiler to capture what it's doing and all of the commands it's run so far look fine and are being run under my account which is associated with the sysadmin role, when I run them in sql management studio they go through fine. I'm pretty convinced that the problem is related to creating the objects in MSDB that are used by DTA but I tried creating these manually (I found scripts on the web) and it just seems to push the problem along the line slightly. I'm going out of my mind - have even tried reinstalling SQL but that's not fixed it. I'm using SQL 2008 with SP1 (10.0.2531) on windows server 2008 (patched up to date). SAVE ME!!!!!

    Read the article

  • Creating Limited User Accounts on Ubuntu Server

    - by LonnieBest
    Using Ubuntu server, I need to create some user accounts that have the following limitations: (1) User may only view and manipulate files in their home directory. (2) User may only execute commands related to rsync and sftp. I want users to be able to backup files using rsync, and I want them to be able retrieve files using an sftp client like FileZilla. Other than this, I don't want users to be able to view other files on the system, or execute any commands that might mess with the system. I'm more of an Ubuntu Desktop user, and have very little experience administering a linux server. Most tutorials I've found assume I know things that I don't know. So I'm having difficulty setting this up.

    Read the article

  • Formatting data from management database

    - by bVector
    I've got some data that goes like this: Config_Name Question Answer Cisco WAN Sensitivity: High Cisco WAN Authorized Users: Brent, Charles Cisco WAN Last Audited: n/a Cisco WAN Next Audit: 3/30/2012 Cisco WAN Audit Signature: Cisco WAN Username: MYCOMPANY Cisco WAN Password: Cisco WAN Encrypted-A ENCRYPTED DATA Cisco WAN Encrypted-B Cisco WAN Encrypted-C vCenter server Sensitivity: High vCenter server Authorized Users: Brent, Charles vCenter server Last Audited: vCenter server Next Audit: 3/30/2012 vCenter server Audit Signature: ENCRYPTED DATA vCenter server Username: administrator vCenter server Password: vCenter server Encrypted-A ENCRYPTED DATA vCenter server Encrypted-B vCenter server Encrypted-C AKSC-NE01 IPMI Sensitivity: High AKSC-NE01 IPMI Authorized Users: Brent, Charles AKSC-NE01 IPMI Last Audited: AKSC-NE01 IPMI Next Audit: 3/30/2012 AKSC-NE01 IPMI Audit Signature: ENCRYPTED DATA AKSC-NE01 IPMI Username: MYCOMPANY AKSC-NE01 IPMI Password: AKSC-NE01 IPMI Encrypted-A ENCRYPTED DATA AKSC-NE01 IPMI Encrypted-B AKSC-NE01 IPMI Encrypted-C and I need it to be in this format: Config_Name Sensitivity: Authorized Users: Last Audited: Next Audit: Audit Signature: Username: Password: Encrypted-A Encrypted-B Encrypted-C AKSC-NE01 IPMI High Brent, Charles 3/30/2012 ENCRYPTED DATA MYCOMPANY ENCRYPTED DATA Cisco ASA5505 WAN High Brent, Charles n/a 3/30/2012 ENCRYPTED DATA MYCOMPANY ENCRYPTED DATA vCenter server High Brent, Charles 3/30/2012 ENCRYPTED DATA administrator ENCRYPTED DATA the tabs get messed up on here but hopefully you get my drift. does anyone know an easy way to do this? I haven't found one with excel just yet.

    Read the article

  • OS for Virtual Private Server (VPS)

    - by B. Stran
    Hi guys! I'm new to VPS managing and I need to chose which OS to install on my VPS. I have the following alternatives: CentOS 5.2 Ubuntu 9.10 Ubuntu Server edition 8.10 Debian 5.0 Lenny Debian 4.0 Etch Gentoo Minimal 10.0 I tried to install couple of them, I've also installed Webmin and doesn't really see any big differences among them. Which one would you suggest for someone who is just learning (but it's going to be a working server as soon as I'm done with testing)? Which one uses less resources (I have only 256 MB of RAM)? Any suggestions are greatly appreciated.

    Read the article

  • Unable to start SQL Server Instance 2008 R2 - DB file corrupt

    - by Velu
    I was not able to start the SQL Server 2008 R2 production DB instance. After reading the log file error message is " The log scan number passed to log scan in database ‘master’ is not valid. This error may indicate data corruption or that the log file (.ldf) does not match the data file (.mdf). If this error occurred during replication, re-create the publication." After reading several post i realize that my MASTER DB file is corrupted. I have followed the below setup Copy the Master.mdf and Masterlog.ldf file from Template location to My Database Data folder. C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Binn\Templates to D:\MSSQL\MSSQL10_50.MSSQLSERVER\MSSQL\DATA Note: Same error occur when i copy the all DB file like Master, MasterLog, MSDBData, MSDBlog, Model and ModelLog When i run my MSSQLSEVER instance different problem occur. In My server i had only C, D- Drive i dont have the E drive. How can i override these below error path. Error LOG 2012-10-24 02:51:12.79 spid5s Error: 17204, Severity: 16, State: 1. 2012-10-24 02:51:12.79 spid5s FCB::Open failed: Could not open file e:\sql10_main_t.obj.x86fre\sql\mkmastr\databases\objfre\i386\MSDBData.mdf for file number 1. OS error: 3(The system cannot find the path specified.). 2012-10-24 02:51:12.79 spid5s Error: 5120, Severity: 16, State: 101. 2012-10-24 02:51:12.79 spid5s Unable to open the physical file "e:\sql10_main_t.obj.x86fre\sql\mkmastr\databases\objfre\i386\MSDBData.mdf". Operating system error 3: "3(The system cannot find the path specified.)". 2012-10-24 02:51:12.79 spid5s Error: 17207, Severity: 16, State: 1. 2012-10-24 02:51:12.79 spid5s FileMgr::StartLogFiles: Operating system error 2(The system cannot find the file specified.) occurred while creating or opening file 'e:\sql10_main_t.obj.x86fre\sql\mkmastr\databases\objfre\i386\MSDBLog.ldf'. Diagnose and correct the operating system error, and retry the operation. 2012-10-24 02:51:12.79 spid5s File activation failure. The physical file name "e:\sql10_main_t.obj.x86fre\sql\mkmastr\databases\objfre\i386\MSDBLog.ldf" may be incorrect.

    Read the article

  • Mac OS X - Could not start Terminal.app - shell has illegal value

    - by chemm
    I can not run the Terminal.app after rolling back my system from time machine. Mac OS X Version 10.6.2 It displays the following error. "Your are not authorized to run this application" "The administrator has set your shell to an illegal value" After that I have deleted the file ~/Library/Preferences/com.apple.Terminal.plist But the same message is displayed. I have repaired all system rights with the DiskUtility but that did not help.

    Read the article

  • Hyper V Server 2012 Remote Management Using Workgroup

    - by Chris Kolenko
    I'm trying to remotely manage Hyper V server 2012 from a windows 8 pc, both client and server are on a workgroup. I've spent about 3-4 hours trying to get this working with no luck so far trying the following: Creating a new administrator on the server with the same details as the client ie. username / password. Add an entry into my hosts file to point to the remote ip by server name. Tried using HVRemote. Disabled both firewalls. The error that I'm getting is RPC Service Unavailable. How can I accomplish what I'm trying to do? Update Some of the operations on the Hyper-V Manager work. IE. Virtual Switch Works. I can open the New VM Wizard. I run into an error when creating a new Virtual Hard Disk tho. I've tried creating a VM without a hard disk, which works. Using the new hard disk wizard does not work either. I still can not see any Virtual Machines. RPC server unavailable. Unable to establish communication between 'ServerName' and 'ClientName'

    Read the article

  • OpenSUSE Yast permissions for user

    - by pajton
    I have an OpenSUSE 11.4 box with Kde 4.6. I am currently working to create a sandbox environment for the user, let's call hime bob. Bob isn't allowed to do much in the system, but I'd like to let him configure certain things in yast. I have dektop shortcuts for particular yast modules, e.g. the shortcut executes xdg-su -c "/sbin/yast2 lan" to launch yast lan configuration. Now, I do not want Bob to have to enter password to launch this configuration (just please don't tell me it's insecure - I know this, in this particular setting it is going to be OK). I wanted to do this with setuid, but obiously setting it on *.desktop shortcut doesn't work. There is sudo approach, but I would have to allow Bob to use all yast modules. So, is there anything more fine-grained to set the permissions for exact yast modules? Thanks in advance!

    Read the article

  • XenServer 5.5 Error adding additional Server to Ressource Pool

    - by SideShowCoder
    I'm running Citrix XenServer 5.5 as a testsetup, with Openfiler providing Storage via NFS. I tried to setup a Ressource Pool to test Live migration but I'm unable to a my 2. Server to the Pool. It fails after about 10sec with the Error: 4/26/2010 2:54:52 PM Error: Adding server 'u-173-c047.XXX.XXX' to pool 'Portland' - Internal error: Stunnel.Stunnel_error("") I'm kind of lost right now where to look whats causing this, and the Error is not really of any help. Are there logs availible somewhere besides in XenCenter, which might be helpful? Any Ideas what is causing this? Thanks

    Read the article

  • How to Deploy a Directory or WAR in TOMCAT6 using ANT?

    - by Hitesh
    I want to deploy directory which is extraction of .war file using ANT in Tomcat6. I have build.xml like <property name="WAR_PATH" value="E:/18-06-2013/TEST"/> <property name="mgr.context.path" value="/FOUR"/> <property name="url" value="http://localhost:8080/manager"/> <property name="username" value="tomcat"/> <property name="password" value="password"/> <target name="deploy" description="Install web application" > <deploy url="${url}" username="${username}" password="${password}" path="${mgr.context.path}" war="file:${WAR_PATH}"/ But when i run the ANT(build.xml) script i get error something like java.io.IOException: too many bytes written at sun.net.www.protocol.http.HttpURLConnection$StreamingOutputStream.write(HttpURLConnection.java:2632) at java.io.BufferedOutputStream.flushBuffer(BufferedOutputStream.java:65> Same script work properly when i try to deploy .war file But ANT(build.xml) script not work properly in case directory. I have also try to deploy directory using HTTP command it work properly.

    Read the article

< Previous Page | 278 279 280 281 282 283 284 285 286 287 288 289  | Next Page >