Search Results

Search found 25346 results on 1014 pages for 'update alternatives'.

Page 282/1014 | < Previous Page | 278 279 280 281 282 283 284 285 286 287 288 289  | Next Page >

• Asus A8V overcurrent

  - by user139710

  This is not as much as a question as it is a note to those out there that upgrade their motherboards with better processors and the like. Here's my story. Recently I upgraded my processor. System specifications: • Asus A8V Deluxe • 4GB RAM • ATI Radeon 3870 AGP graphics card (I believe that's it) Anyway, I decided to put a dual core Opteron 180 in this rig, but the problem was that I needed to update the BIOS to V-1017, and not knowing the consequences, I went up to the Asus site and got the newest, the latest and the greatest, 1018.002 thinking that it was the best for this board, however it wasn't. I used the Asus EXFlash, which makes life a lot easier, flashed the BIOS and all of a sudden I start getting this message: USB overcurrent protection, system shutting down in 15 seconds to protect your system. WELL SHIT... This is a new one on me... I read the blogs, all the posts on this thing, and did all that everyone else did to correct the problem, but nothing helped. So i decided to start from square one, went back to Asus and looked at the BIOS download... OMG... IT WAS A BETA. So, I downloaded the update that was suggested 1017< and installed it and wouldn't you know, it took care of the problem, no more USB overcurrent protection, no more crashing. I write this today to let you all know about this, just in case you have an issue such as this. Well there you all go. Fly safe and eat your vegetables.

  Read the article

• Updating wordpress in a multi-node environment

  - by Peter

  I'm finding this very tricky in a multi node environment, with code under revision control. AKA. multiple frontends and single database. I have a deployment process that pushes a git repo to the servers, but obviously if I update Wordpress from within the admin panel, it will update the files to one FE. Then I would need to copy over the new files to the other FE nodes. Plus, whenever these changes are written when Wordpress updates on a node, it writes code into the git repo. As such, it then breaks the auto deploys that perform 'git pulls', as it then has untracked changes and refuses to pull in new deploys unless manually intervened. How does one easily keep Wordpress updated in a multi node (load balanced) environment?

  Read the article

• Wednesday at Oracle OpenWorld 2012 - Must See Session: “Cloud and On-Premises Applications Integration, Using Oracle Integration Adapters”

  - by Lionel Dubreuil

  Don’t miss this “CON8642 - Cloud and On-Premises Applications Integration, Using Oracle Integration Adapters“ with Ramkumar Menon - Senior Product Manager, Oracle: Date: Wednesday, Oct 3 Time: 1:15 PM - 2:15 PM Location: Moscone South – 310 Oracle integration adapters in Oracle Fusion Middleware offer organizations a service-oriented approach to unlocking the information assets that have evolved in most IT environments. This session provides a detailed overview of their features and product architecture and an update on the 11g release. It also examines the changing application and technology landscape and how the integration adapters will continue to provide connectivity and harness information from diverse enterprise applications and technologies—both on-premises and in the cloud. Objectives for this session are to: Present an Oracle integration adapters overview Describe key use cases Provide an update on the 11g release and future roadmap Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif";}

  Read the article

• Auto-scaling EC2 Servers and Updating Code

  - by jstats

  We've come to the point where we need to set up autoscaling for our web server and I'm unsure how to go about the process of scaling servers and updating the the existing code without remaking a new AMI and changing the autoscale config to use it. I've read a bit about people bundling the new code and uploading it to s3 and having new servers grab the bundle on boot up but that doesn't seem all that pleasant either. Currently the web app's files live in a git repo, and when we update the code, we push it to github, ssh into the web app and run a hook to bring down the latest code. So I was thinking that another option could be to just run that hook on an hourly or daily cron task. Unfortunately that doesn't cover everything type of update (for example new blog posts' images and such which aren't included in the git repo) but it's something. Could anyone provide some advice on what a common solution is or anything as to why my proposed solution is a bad idea? Thanks all

  Read the article

• Oracle Solaris 11.1 available today

  - by user12611852

  Today Oracle is pleased to announce availability of Oracle Solaris 11.1. Download Solaris 11.1 Order Solaris 11.1 media kitExisting customers can quickly and simply update using the network based repository Highlights include: 8x faster database startup and shutdown and online resizing of the database SGA with a new optimized shared memory interface between the database and Oracle Solaris 11.1 Up to 20% throughput increases for Oracle Real Application Clusters by offloading lock management into the Oracle Solaris kernel Expanded support for Software Defined Networks (SDN) with Edge Virtual Bridging enhancements to maximize network resource utilization and manage bandwidth in cloud environments 4x faster Solaris Zone updates with parallel operations shorten maintenance windows New built-in memory predictor monitors application memory use and provides optimized memory page sizes and resource location to speed overall application performance. Learn more and share these valuable tools with your customers to enable them to move to Oracle Solaris 11.1 quickly. Many customers wait for the first update --now is the time to encourage them to install Oracle Solaris 11.1. Oracle Solaris 11.1 Data Sheet  What's New in Oracle Solaris 11.1 Oracle Solaris 11.1 FAQs Oracle Solaris 11 .1 Customer Presentation Oracle Solaris 11.1 is recommended for all SPARC T4 Systems and will soon be available preinstalled.

  Read the article

• Why has the NoScript icon disappeared?

  - by Peter Mortensen

  Why has the appearence of NoScript changed? Using Noscript in Firefox (Microsoft Windows): Until now there has been an icon (the S icon) in the lower right of the screen. But now there is an button instead with the text "Options". Left clicking this button seems to bring up the menu as right clicking the old icon. Can I restore the previous state? Is there an auto-update function in NoScript and if so could it have caused the change? If it exists can the auto-update function be disabled? Platform: Firefox 3.0.6, NoScript 1.9.0.6, Windows XP 64 bit, 8 GB RAM.

  Read the article

• Missing swf plugin in Google Chrome [Ubuntu]

  - by Bakhtiyor

  How to play .swf file in Google Chrome? Because when I open .swf files it says Missing Plug-in. though when I open chrome://plugins it shows that it has Shockwave Flash plugin installed already. My OS is Ubuntu 10 and would be happy if some linux geek could suggest me solution of my problem. Thanks and sorry for stupid question. Update 1 Here is information about version of the applications I use: Chrome 5.0.375.70 (48679) Ubuntu Shockwave Flash 9.0 r999 Update 2 I have solved the problem by the following way: Opened Application Manager Synaptic Deleted all the packages concerning flash and swf Opened up Application Center Ubuntu Searched for flash It found Adobe Flash Plugin Installed that application

  Read the article

• My work isn't being used... what can/ should I do?

  - by Matt

  Several months ago I was approached by a small business, who had seen my work previously and asked me to create a website for them. Since then, the website hasn't changed one bit and I haven't heard a word from them. This sucks for them as they paid for a website and haven't used it. It''s frustrating for me because I spent a huge amount of time on the website and feel that all of that effort has been wasted, furthermore, I don't feel I can use the website on my portfolio/ CV. I was thinking of offering to go round to their office for one day, and update the website for them then and there; but I'd need their support whilst there (to get the content for the about page, to get information for on their products etc.) and I don't want to disrupt their work day, nor do I want to sit there like a spare tyre and get nowhere. Furthermore, if I were to do this, should I expect to receive money for it? It's a day of my life, but I'm doing it for my benefit rather than theirs (but they benefit as well). Has anyone else had experience of a client not using their product; how did you handle it? Additional background for those who want it: The company is a local travel agent, and the website lets them CRUD offers and locations, and has several other static pages (about, contact, etc.) At the time of creating the website, I filled the static pages with lipsum, and the offers and locations with fake information, so that I could give the business an idea about what the final pages would look like; during the hand over, I guided them through the CRUD forms (they made notes) and said if they sent me the text for the pages, I'd update it.

  Read the article

• How to trigger a check for updates in Firefox programatically or from a command line?

  - by Triynko

  Is there a command line switch for firefox.exe or an "about:" URL that will either force an update check or at least display the Help/About dialog, which checks for updates and tells if you're running the latest version? One site claimed that the "about:" URL was the same as menu Help - About, but it's not. I built a program to automate the updating of various programs on my machine, and most programs have command line tools for checking for updates. Windows update has wuauclt.exe, Java has jucheck.exe. For some applications, I can even automate the interface, but it's difficult in Firefox, because the main window title is unpredictable (it depends on which web page is active), and all Firefox windows seem to use the exact same window class name.

  Read the article

• Does a Radeon 2100 support the Assassin Creed game? [closed]

  - by karanvir

  does ATI RADON 2100,support assissin creed game and how to update shadermodel to 3.0 ver and does my graphic card support it.reply soon waiting for ur reply

  Read the article

• Factory for arrays of objects in python

  - by Vorac

  Ok, the title might be a little misleading. I have a Window class that draws widgets inside itself in the constructor. The widgets are all of the same type. So I pass a list of dictionaries, which contain the parameters for each widget. This works quite nicely, but I am worried that the interface to callers is obfuscated. That is, in order to use Window, one has to study the class, construct a correct list of dictionaries, and then call the constructor with only one parameter - widgets_params. Is this good or bad design? What alternatives does the python syntax provide?

  Read the article

• configuring default PYTHONPATH

  - by Shan

  I have Django application and few Django commands that I would execute through cronjobs on CentOS 5. Recently I updated my python-setuptools package, which in-turn update python-devel packages. After performing this update, the default PYTHONPATH settings for the Django commands executed through cronjob are different from the Django application which I execute from shell. Because of this mismatch my old Django cronjobs fail since the required libraries are not in path. How do I resolve this issue and ensure that both the cronjob Django commands and the Django application have the same environment?

  Read the article

• Issue using a "used" SSD as a Windows 8.1 Boot Drive

  - by EpiGrad

  So, I'm something of a Mac person, but decided to take a stab at this whole "build yourself a PC" thing - right now, the thing is assembled, posts just fine, and can get to the BIOS. The problem is the drive I want to use - I intended to use a 80 GB Corsair SSD I've had sitting around as the boot drive, and a new Samsung SSD for games and the like. So I boot using a Windows 8.1 install USB stick, and if the Samsung drive is plugged in, it happily offers to install Windows on it. The Corsair drive though, it's flipped out - I reformatted it as a blank NTFS drive (it was HFS for Mac purposes) and the BIOS can't see it, nor can the Windows installer. What's wrong, and how do I fix it? The tools at my disposal are: The current ASUS BIOS that came with my motherboard (a Z87I-Deluxe), a Mac running the latest OS X which can also boot to Windows 7 if needed via either Parallels or Bootcamp. Update 1: Update: Based on a friend's suggestion to switch SATA ports, Windows 8.1's installer can now see the drive as Drive 0, Partition 1, a 83.8 GB "Primary" partition. But when I click it and hit "Next", I get the following error: "We couldn't create a new partition or locate an existing one. For more information, see the Setup log files" - not that it gives any clue how to access those. Update 2: Following a trail of Google suggestions, I ended up going into advanced tools and just reformatting the drive as follows: Start DISKPART. Type LIST DISK and identify your SSD disk number (from 0 to n disks). Type SELECT DISK <n> where <n> is your SSD disk number. Type CLEAN Type CREATE PARTITION PRIMARY Type ACTIVE Type FORMAT FS=NTFS QUICK Type ASSIGN Type EXIT twice (one to get out of DiskPart, the other to exit the command line tool) Per these instructions. This goes well enough, but now I can select the disk for installation, and I get a new error: "Windows 8 cannot be installed to this disk. The selected disk has an MBR partition table. On EFI systems, Windows can only be installed to GP disks." So, Googling that, I do the following: select disk 0 clean convert gpt exit ...and we might have fixed it. Windows is at least trying to install now.

  Read the article

• T60 Screen/LCD gets black after some minutes with a highpitched sound rising and fading

  - by edelwater

  Just now my T60 screen got "black" (so no display). On my second monitor: no problems so the VGA output works. Symptom: Screen blanks / no display, but it works on the second monitor Steps to reproduce: - boot - wait (it does not matter what you do you do not have to login or anything) - (now the monitor of the laptop slowly begins to make a ssssssssHHHHHHHHHHHHHHHHHWOEOEssssssss noise of about 10 seconds) - right after the sounds ends, the monitor gets black. Sometimes it seems to be the same each time. Software: Installed no new software before/after, running ZoneAlarm and antivirus. Other: It does not feel hot in any place, there don't seem to be running processes with strange behaviour. Warranty: Out of warranty What was I doing: Typing text on a website and doing some PHP coding in a text editor. What can I do here other than buy a new laptop? Does it sound familiar to known cases? Update 1: Exactly the same problem: http://forums.lenovo.com/t5/T61-and-prior-T-series-ThinkPad/T60-Screen-Blackout/m-p/288772 and the second poster (garyj), http://forums.lenovo.com/t5/T61-and-prior-T-series-ThinkPad/Black-Screen-on-T60/m-p/235053#M48627 And here: "I have that same problem. I replaced the CCRL on mine and it works fine when the screen is not screwed in. Once the frame of the LCD screen (metal portion) touches the metal on the laptop which holds the screen the screen goes black. If the metal is touching the screen when you boot up it boots up with it being very dimmly lit. " from http://forums.lenovo.com/t5/T61-and-prior-T-series-ThinkPad/T60-screen-problems/m-p/205047#M44995 (it seems replacing the LCD display is no use, he tried it three times). Same problem: http://forums.lenovo.com/t5/T61-and-prior-T-series-ThinkPad/T60-black-screen/m-p/80604#M25914 Hmmm... not handy 3 or 4 months ago I ordered and installed a new fan. Now the LCD. Which does not seem the core issue but some electric issue so it seems replacing the LCD is not the thing to do here. If it is not the LCD that needs to be replaced (see other threads), which parts can I order to fix this? Is there any information which could lead me to identify the issue? I have read replacing the "inverter" AND the "backlightning" would that make sense? Update 2: I replaced the inverter with another inverter, but IO have the same problem. I DID notice that the inverter is the component that makes the sssssssssssssHHHHHHHHHH sound AND it becomes very hot in a few seconds. (So both the old and the test one) The problem is hmmm wat is then the thing that makes the inverter hot by (assumption) after which it shuts itself down. Is it either the input or the output? The output seems to me not, because the screen seems to function so it must be the electricity coming in. But what causes it to become so hot would it be the VGA card outputting some unusual high voltage seems unlikely? I am looking for the component to order / replace update 3: Great news. Ewendish gave me the hint to look in the BIOS. While I was in the BIOS I noticed that the screen did not switch off and there was not a high pitched sound. So I lowered some settings in the BIOS. I then noticed that with brightness turned to 0 (via FN End), it does not make a high pitched sound and does not turn off, with brightness turned up just three "stripes" it starts making the sound. So I could from now on work under lowest brightness modus or... see where the problem lies. So as stated below with either power management or display drivers / ATI Catalyst settings / Windows display settings. I'm trying to see where it lies, but I will google some first. Update 4: I wiped clean the Windows XP installation and installed Windows 7 on it. Unfortunately the problem remains: as soon as the brightness goes up the screen starts hissing. This means... back to original thought: it probably IS a hardware problem. Although ... again... if it is NOT the inverter, what is it? Could it be the backlightning component? I could try to switch that with a another T60... but this is quite tricky.

  Read the article

• Which is Better: Revo Uninstaller or a Free Alternative?

  - by The Geek

  The results might surprise you! Our friends over at 7 Tutorials did some testing and found that the free IObit uninstaller application actually stacked up pretty well against the paid solution from Revo—though perhaps with a few less features. Note: we’ve always been fans of Revo Uninstaller around here, since it does have a lot of features to help clean up bad apps that the free alternatives don’t have. Either way, the 7 Tutorials article is worth a read. Roundup of Software Uninstallers – Reviewing IObit vs Ashampoo vs Revo [7 Tutorials] Use Amazon’s Barcode Scanner to Easily Buy Anything from Your Phone How To Migrate Windows 7 to a Solid State Drive Follow How-To Geek on Google+

  Read the article

• OS X software updates download but don't install

  - by ridogi

  I've got three 10.6 computers that won't install OS X updates. Checking for new software will show about a dozen updates (Security updates, Safari, iPhoto, printers, etc) and if choose install it downloads them. After downloading and then clicking restart the computer sits at the purplish sky desktop with no progress bar, and then after about 3 minutes it goes back to the login window (without ever installing or restarting). If I then select check for updates the same updates will all be presented and I can repeat the process. Manually downloading and installing an update such as 10.6.8 combo updater works as it should, and then check for updates no longer presents that particular update as an option. This seems to be the result of some setting or 3rd party application as I've got 3 out 7 computers experiencing this exact same problem. What could cause this and how can I fix it?

  Read the article

• How to install Gyachi on ubuntu 12.10 [Solved]

  - by Oguz Can Sertel

  ok ... there is no way to install it on ubuntu 12.10 I would like to use Gyachi on ubuntu 12.10. I tried these steps but it doesn't work.. I wanted to compile it myself... but it need some libs... it made me confused... so I gave up sudo add-apt-repository ppa:adilson/experimental sudo apt-get update sudo apt-get install gyachi Thank you for your helps at first command the output: sudo add-apt-repository ppa:adilson/experimental You are about to add the following PPA to your system: Contains packages that are not in the official Debian/Ubuntu repositories and newer versions and snapshots which are not available yet in the repositories. Theses packages are experimental. Use them at your own risk. More info: https://launchpad.net/~adilson/+archive/experimental Press [ENTER] to continue or ctrl-c to cancel adding it gpg: keyring `/tmp/tmp3y3i7p/secring.gpg' created gpg: keyring `/tmp/tmp3y3i7p/pubring.gpg' created gpg: requesting key 27B81625 from hkp server keyserver.ubuntu.com gpg: /tmp/tmp3y3i7p/trustdb.gpg: trustdb created gpg: key 27B81625: public key "Launchpad Experimental Packages PPA" imported gpg: Total number processed: 1 gpg: imported: 1 (RSA: 1) OK and after sudo apt-get update; this is (sudo apt-get install gyachi)'s output here is the output: sudo apt-get install gyachi Reading package lists... Done Building dependency tree Reading state information... Done E: Unable to locate package gyachi

  Read the article

• script to test mail server

  - by WebDude

  Ever since a windows update that took down my IIS6 mail server a few weeks back, I've been really paranoid about my mail server working. So every time I run a windows update I fire up command prompt and send myself a quick test mail. Like so: > telnet localhost 25 > helo domain.com > mail from: [email protected] > rcpt to: [email protected] > data some random body to mail myself . This is a realy great way to test my mail server, but it's a pain in the neck to do quickly. Is there anyway i can run this in a batch script or something as a quick test? I've tried a bat file but this just waits after i call telnet I've also explored if telnet accepts any input files and it does not seem to. What's the best way to do this?

  Read the article

• Are Java's public fields just a tragic historical design flaw at this point?

  - by Avi Flax

  It seems to be Java orthodoxy at this point that one should basically never use public fields for object state. (I don't necessarily agree, but that's not relevant to my question.) Given that, would it be right to say that from where we are today, it's clear that Java's public fields were a mistake/flaw of the language design? Or is there a rational argument that they're a useful and important part of the language, even today? Thanks! Update: I know about the more elegant approaches, such as in C#, Python, Groovy, etc. I'm not directly looking for those examples. I'm really just wondering if there's still someone deep in a bunker, muttering about how wonderful public fields really are, and how the masses are all just sheep, etc. Update 2: Clearly static final public fields are the standard way to create public constants. I was referring more to using public fields for object state (even immutable state). I'm thinking that it does seem like a design flaw that one should use public fields for constants, but not for state… a language's rules should be enforced naturally, by syntax, not by guidelines.

  Read the article

• Windows audio service fails to automatically start after VirtualBox install

  - by humble_coder

  I'm having a completely nonsensical issue in Windows XP SP3. Basically my "Windows Audio" service no longer starts automatically. Despite being set to "Automatic" I have to manually go in and start it. This issue didn't start until the most recent update of VirtualBox, but I can't find anything on the forums related to this specific issue. I've tried reinstalling the RealTek drivers as well, in the event that that had something to do with it. Any assistance is most appreciated! EDIT 1: It is the host's audio that won't start. The update of Virtualbox was merely the "marker" of when these events started occurring. Given it's the only variable/change I'm assuming a correlation.

  Read the article

• Automating the installation using SSH

  - by RAY

  I am running a bash script from a remote host to run a binary file which installs 64 bit JDK 6 update 29 on multiple VMs across the Environment. It is installing the file but, at the last line i have to hit a enter to complete the installation. I want to fully automate the script where i do not have to hit the enter at the last line. This is what i am using ssh ${V_TIERS}@${V_TIERS} 'cd JDK; sh jdk-6u29-solaris-sparcv9.sh' It updates as desired, but during install i have to hit enter to continue and complete the installation. Can anybody please help to fully automate the update process.

  Read the article

• how to merge changes from original project -- GitHub in Windows

  - by user62046

  I created an account at https://github.com/, fork someone's project so I have my own repository, instal github client for windows, and clone my repository to my local drive. I will work on my local drive. But during the developement of the project, I would like to merge the changes in the official, original, project. I didn't find how to do this. Before, I use tortoiseSVN client for windows, and there is an option "SVN Update" which can update the project to the latest revision. But I am new to Github and its client, and don't know how to do it.

  Read the article

• sata2 hdd not reported correctly on gigabyte mobo

  - by hyperboreean

  hey guys, I have a gigabyte ga-k8nmf-9 mobo which has both sata 1 and sata 2 support. Until a few hours ago I had a samsung 160gb sata 1 hdd which worked ok until it failed. I bought a wd se16 caviar, 500 gb, 7200 rpm, 16 mb cache, but it seems that it's not properly detected by my computer - it's only showing 137 GB out of 500. I tried a BIOS update (to F10e) and it's still doing the same thing. I've altered BIOS settings to use only sata (no ide) and many other settings, but nothing worked. Any help will be greatly appreciated Update on this one: it seems that the previous hdd was doing the same thing, though I didn't notice because it was approximately the same size

  Read the article

• How do I prevent software packages from being downloaded until I know it's safe?

  - by Dave M G

  Recently, an update that caused a problem with Gnome session caused me to lose a day's work. The solution was to rollback some packages to a previous version. The update manager is now telling me that my old packages should be updated: ... but I don't want to do that until I know that whatever bug or problem the latest version has is resolved. I understand that with any upgrade that there is a risk of instability. However, in the 8 years or more that I've been on Ubuntu, using the latest releases has been stable enough and with the benefit of the latest features and security. So, I'm not looking for general advice on how to handle upgrades. What I'm saying is that in this one particular instance, the bug introduced by these upgrades is severe and time wasting. But, as an end user, when I encounter a problem like this, I have no idea how to address a specific concern about a specific package. I don't, for example, know which of these packages is the problem, and I can't take time from my work schedule to be experimenting with each package. So, my question is: How do I find out who exactly is responsible for these, or any, packages so that I can contact them and let them know about the problem? How do I freeze these packages only, but allow other upgrades to happen? ubuntu-session gnome-session-common gnome-session-bin gnome-session

  Read the article

• Best in-depth analytics or stats tools? (preferrably server-side)

  - by Litso

  Hey all, I know there's been questions about this before, but mine is a little more specific. I work for a high traffic website and we want to start tracking our visitors better. Unfortunately, Google Analytics is not an option at the moment, so what I'm looking for is some alternatives, preferrably server-side (but not necessarily). We're currently running Urchin, but what I'm missing most there is the way you can set conversions in Analytics and then track (for example) which keywords convert better or which landing pages convert better. Also, A/B testing is something I really miss. Which analytics tools can be compared to analytics in terms of advanced segmentation, navigation summaries, A/B testing, etc?

  Read the article

< Previous Page | 278 279 280 281 282 283 284 285 286 287 288 289  | Next Page >