Search Results

Search found 7731 results on 310 pages for 'exit failure'.

Page 283/310 | < Previous Page | 279 280 281 282 283 284 285 286 287 288 289 290  | Next Page >

• Job queue manager with RPC interface

  - by admr

  I need a job queue manager that I can control over the Internet. It should be able to execute and stop processes, check on their status (ideally notice and execute some code when a process exits), respond to commands and also be able to report back to a server. Background: I have a GWT application that allows to create jobs to execute on a cloud instance (currently EC2). I want to push a "job packet" (data for a process to operate on etc) to S3, start a Linux EC2 instance (or use one that's already running), and tell a job manager on the instance to execute that job (possibly parallel to other jobs). It should then pull the "job packet" from S3, run a process that operates on that data and report back to the server that is running the server part of my GWT application with some information (e.g. exit code, stdout, stderr). If I have to write e.g. stdour/err to a file from the process and read that file, that's OK too. I would really like the manager to be "close" to the processes it runs, meaning I want to avoid using something like Runtime.exec from the JDK. It seems like I would have to do that if I used Quartz for example. I'm fine with the calls in both directions being asynchronous. I'm fine with any reasonable technology for the calls as long as I can easily build an interface for that in my GWT server side (e.g. HTTP requests to a servlet over SSL would be nice and trivial). The job manager does not need to have a very sophisticated queueing system. Running several processes either sequentially or in parallel should be fine. Determining how much compute time a process received during its lifetime would be nice (AFAIK, this might be challenging). I did not yet find any existing software that does this, including http://java-source.net/open-source/job-schedulers. I suspect I might have to build an RPC interface (with authentication etc, of course) around a job manager; maybe use something like Apache Commons Exec. In that case, I would prefer Java or Python for the job manager part. I would be happy to hear suggestions for either the former or latter scenario!

  Read the article

• More GCC link time issues: undefined reference to main

  - by vikramtheone

  Hi Guys, I'm writing software for a Cortex-A8 processor and I have to write some ARM assembly code to access specific registers. I'm making use of the gnu compilers and related tool chains, these tools are installed on the processor board(Freescale i.MX515) with Ubuntu. I make a connection to it from my host PC(Windows) using WinSCP and the PuTTY terminal. As usual I started with a simple C project having main.c and functions.s. I compile the main.c using GCC, assemble the functions.s using as and link the generated object files using once again GCC, but I get strange errors during this process. An important finding - Meanwhile, I found out that my assembly code may have some issues because when I individually assemble it using the command as -o functions.o functions.s and try running the generated functions.o using ./functions.o command, the bash shell is failing to recognize this file as an executable(on pressing tab functions.o is not getting selected/PuTTY is not highlighting the file). Can anyone suggest whats happening here? Are there any specific options I have to send, to GCC during the linking process? The errors I see are strange and beyond my understanding, I don't understand to what the GCC is referring. I'm pasting here the contents of main.c, functions.s, the Makefile and the list of errors. Help, please!!! Vikram main.c #include <stdio.h> #include <stdlib.h> int main(void) { puts("!!!Hello World!!!"); /* prints !!!Hello World!!! */ return EXIT_SUCCESS; } functions.s * Main program */ .equ STACK_TOP, 0x20000800 .text .global _start .syntax unified _start: .word STACK_TOP, start .type start, function start: movs r0, #10 movs r1, #0 .end Makefile all: hello hello: main.o functions.o gcc -o main.o functions.o main.o: main.c gcc -c -mcpu=cortex-a8 main.c functions.o: functions.s as -mcpu=cortex-a8 -o functions.o functions.s Errors ubuntu@ubuntu-desktop:~/Documents/Project/Others/helloworld$ make gcc -c -mcpu=cortex-a8 main.c as -mcpu=cortex-a8 -o functions.o functions.s gcc -o main.o functions.o functions.o: In function `_start': (.text+0x0): multiple definition of `_start' /usr/lib/gcc/arm-linux-gnueabi/4.3.3/../../../crt1.o:init.c:(.text+0x0): first defined here /usr/lib/gcc/arm-linux-gnueabi/4.3.3/../../../crt1.o: In function `_start': init.c:(.text+0x30): undefined reference to `main' collect2: ld returned 1 exit status make: *** [hello] Error 1

  Read the article

• Would someone mind giving suggestions for this new assembly language?

  - by Noctis Skytower

  Greetings! Last semester in college, my teacher in the Computer Languages class taught us the esoteric language named Whitespace. In the interest of learning the language better with a very busy schedule (midterms), I wrote an interpreter and assembler in Python. An assembly language was designed to facilitate writing programs easily, and a sample program was written with the given assembly mnemonics. Now that it is summer, a new project has begun with the objective being to rewrite the interpreter and assembler for Whitespace 0.3, with further developments coming afterwards. Since there is so much extra time than before to work on its design, you are presented here with an outline that provides a revised set of mnemonics for the assembly language. This post is marked as a wiki for their discussion. Have you ever had any experience with assembly languages in the past? Were there some instructions that you thought should have been renamed to something different? Did you find yourself thinking outside the box and with a different paradigm than in which the mnemonics were named? If you can answer yes to any of those questions, you are most welcome here. Subjective answers are appreciated! hold N Push the number onto the stack copy Duplicate the top item on the stack copy N Copy the nth item on the stack (given by the argument) onto the top of the stack swap Swap the top two items on the stack drop Discard the top item on the stack drop N Slide n items off the stack, keeping the top item add Addition sub Subtraction mul Multiplication div Integer Division mod Modulo save Store load Retrieve L: Mark a location in the program call L Call a subroutine goto L Jump unconditionally to a label if=0 L Jump to a label if the top of the stack is zero if<0 L Jump to a label if the top of the stack is negative return End a subroutine and transfer control back to the caller exit End the program print chr Output the character at the top of the stack print int Output the number at the top of the stack input chr Read a character and place it in the location given by the top of the stack input int Read a number and place it in the location given by the top of the stack Question: How would you redesign, rewrite, or rename the previous mnemonics and for what reasons?

  Read the article

• Can't start rails server after 3.0.1 upgrade

  - by Alberto

  Followed instructions on Railscast but can't get server to start. It states the following error: $ rails s script/rails:6:in `require': no such file to load -- rails/commands (LoadError)` from script/rails:6:in `<main>' Saw the answer on this related question but my Gemfile has no reference to any rails 2.x version and in the "bundle install" results i get this in the results: "Using rails (3.0.1)" EDIT: (adding Gemfile.lock details) GEM remote: http://rubygems.org/ specs: abstract (1.0.0) actionmailer (3.0.1) actionpack (= 3.0.1) mail (~> 2.2.5) actionpack (3.0.1) activemodel (= 3.0.1) activesupport (= 3.0.1) builder (~> 2.1.2) erubis (~> 2.6.6) i18n (~> 0.4.1) rack (~> 1.2.1) rack-mount (~> 0.6.12) rack-test (~> 0.5.4) tzinfo (~> 0.3.23) activemodel (3.0.1) activesupport (= 3.0.1) builder (~> 2.1.2) i18n (~> 0.4.1) activerecord (3.0.1) activemodel (= 3.0.1) activesupport (= 3.0.1) arel (~> 1.0.0) tzinfo (~> 0.3.23) activeresource (3.0.1) activemodel (= 3.0.1) activesupport (= 3.0.1) activesupport (3.0.1) arel (1.0.1) activesupport (~> 3.0.0) builder (2.1.2) calendar_date_select (1.16.1) erubis (2.6.6) abstract (>= 1.0.0) googlecharts (1.6.0) i18n (0.4.2) mail (2.2.9) activesupport (>= 2.3.6) i18n (~> 0.4.1) mime-types (~> 1.16) treetop (~> 1.4.8) mechanize (1.0.0) nokogiri (>= 1.2.1) mime-types (1.16) nokogiri (1.4.3.1) pg (0.9.0) polyglot (0.3.1) rack (1.2.1) rack-mount (0.6.13) rack (>= 1.0.0) rack-test (0.5.6) rack (>= 1.0) rails (3.0.1) actionmailer (= 3.0.1) actionpack (= 3.0.1) activerecord (= 3.0.1) activeresource (= 3.0.1) activesupport (= 3.0.1) bundler (~> 1.0.0) railties (= 3.0.1) railties (3.0.1) actionpack (= 3.0.1) activesupport (= 3.0.1) rake (>= 0.8.4) thor (~> 0.14.0) rake (0.8.7) sparklines (0.5.2) thor (0.14.4) treetop (1.4.8) polyglot (>= 0.3.1) tzinfo (0.3.23) PLATFORMS ruby DEPENDENCIES calendar_date_select googlecharts mechanize pg rails (= 3.0.1) sparklines EDIT: (adding Boot.rb details) require 'rubygems' # Set up gems listed in the Gemfile. gemfile = File.expand_path('../../Gemfile', __FILE__) begin ENV['BUNDLE_GEMFILE'] = gemfile require 'bundler' Bundler.setup rescue Bundler::GemNotFound => e STDERR.puts e.message STDERR.puts "Try running `bundle install`." exit! end if File.exist?(gemfile)

  Read the article

• Python4Delphi: Returning a python object in a function. (DelphiWrapper)

  - by Gabriel Fonseca

  I am using python4delphi. ow can I return an object from a wrapped Delphi class function? Code Snippet: I have a simple Delphi Class that i wrapped to Python Script, right? TSimple = Class Private function getvar1:string; Public Published property var1:string read getVar1; function getObj:TSimple; end; ... function TSimple.getVar1:string; begin result:='hello'; end; function TSimple.getObj:TSimple; begin result:=self; end; I made the TPySimple like the demo32 to give class access to the python code. My python module name is test. TPyDado = class(TPyDelphiPersistent) // Constructors & Destructors constructor Create( APythonType : TPythonType ); override; constructor CreateWith( PythonType : TPythonType; args : PPyObject ); override; // Basic services function Repr : PPyObject; override; class function DelphiObjectClass : TClass; override; end; ... { TPyDado } constructor TPyDado.Create(APythonType: TPythonType); begin inherited; // we need to set DelphiObject property DelphiObject := TDado.Create; with TDado(DelphiObject) do begin end; Owned := True; // We own the objects we create end; constructor TPyDado.CreateWith(PythonType: TPythonType; args: PPyObject); begin inherited; with GetPythonEngine, DelphiObject as TDado do begin if PyArg_ParseTuple( args, ':CreateDado' ) = 0 then Exit; end; end; class function TPyDado.DelphiObjectClass: TClass; begin Result := TDado; end; function TPyDado.Repr: PPyObject; begin with GetPythonEngine, DelphiObject as TDado do Result := VariantAsPyObject(Format('',[])); // or Result := PyString_FromString( PAnsiChar(Format('(%d, %d)',[x, y])) ); end; And now the python code: import test a = test.Simple() # try access the property var1 and everything is right print a.var1 # work's, but.. b = a.getObj(); # raise a exception that not find any attributes named getObj. # if the function returns a string for example, it's work.

  Read the article

• to understand the code- how the heap is written in process migration in solaris

  - by akshay

  hi guys i need help understanding what this piece of code actually does as it is a part of my project i am stuck here. the code is from libckpt on solaris. /********************************** * function: write_heap * args: map_fd -- file descriptor for map file * data_fd -- file descriptor for data file * returns: no. of chunks written on success, -1 on failure * side effects: writes all included segments of the heap to ckpt files * misc.: If we are forking and copyonwrite is set, we will write the heap from bottom to top, moving the brk pointer up each time so that we don't get a page copied if the * called from: take_ckpt() ***********************************/ static int write_heap(int map_fd, int data_fd) { Dlist curptr, endptr; int no_chunks=0, pn; long size; caddr_t stop, addr; if(ckptflags.incremental){ /-- incremental checkpointing on? --/ endptr = ckptglobals.inc_list-main-flink; /*-- for each included chunk of the heap --*/ for(curptr = ckptglobals.inc_list->main->blink->blink; curptr != endptr; curptr = curptr->blink){ /*-- write out the last page in the included chunk --*/ stop = curptr->addr; pn = ((long)curptr->stop - (long)sys.DATASTART) / PAGESIZE; if(isdirty(pn)){ addr = (caddr_t)max((long)curptr->addr, (long)((pn * PAGESIZE) + sys.DATASTART)); size = (long)curptr->stop - (long)addr; debug(stderr, "DEBUG: Writing heap from 0x%x to 0x%x, pn = %d\n", addr, addr+size, pn); if(write_chunk(addr, size, map_fd, data_fd) == -1){ return -1; } if((int)addr > (int)(&end) && ckptflags.enhanced_fork){ brk(addr); } no_chunks++; } /*-- write out all the whole pages in the middle of the chunk --*/ for(pn--; pn * PAGESIZE + sys.DATASTART >= stop; pn--){ if(isdirty(pn)){ addr = (caddr_t)((pn * PAGESIZE) + sys.DATASTART); debug(stderr, "DEBUG: Writing heap from 0x%x to 0x%x, pn = %d\n", addr, addr+PAGESIZE, pn); if(write_chunk(addr, PAGESIZE, map_fd, data_fd) == -1){ return -1; } if((int)addr > (int)(&end) && ckptflags.enhanced_fork){ brk(addr); } no_chunks++; } } /*-- write out the first page in the included chunk --*/ addr = curptr->addr; size = ((pn+1) * PAGESIZE + sys.DATASTART) - addr; if(size > 0 && (isdirty(pn))){ debug(stderr, "DEBUG: Writing heap from 0x%x to 0x%x\n", addr, addr+size); if(write_chunk(addr, size, map_fd, data_fd) == -1){ return -1; } if((int)addr > (int)(&end) && ckptflags.enhanced_fork){ brk(addr); } no_chunks++; } } } else{ /-- incremental checkpointing off! --/ endptr = ckptglobals.inc_list-main-blink; /*-- for each included chunk of the heap --*/ for(curptr = ckptglobals.inc_list->main->flink->flink; curptr != endptr; curptr = curptr->flink){ debug(stderr, "DEBUG: saving memory from 0x%x to 0x%x\n", curptr->addr, curptr->addr+curptr->size); if(write_chunk(curptr->addr, curptr->size, map_fd, data_fd) == -1){ return -1; } if((int)addr > (int)(&end) && ckptflags.enhanced_fork){ brk(addr); } no_chunks++; } } return no_chunks; }

  Read the article

• wget not behaving via IPC::Open3 vs bash

  - by Ryley

  I'm trying to stream a file from a remote website to a local command and am running into some problems when trying to detect errors. The code looks something like this: use IPC::Open3; my @cmd = ('wget','-O','-','http://10.10.1.72/index.php');#any website will do here my ($wget_pid,$wget_in,$wget_out,$wget_err); if (!($wget_pid = open3($wget_in,$wget_out,$wget_err,@cmd))){ print STDERR "failed to run open3\n"; exit(1) } close($wget_in); my @wget_outs = <$wget_out>; my @wget_errs = <$wget_err>; print STDERR "wget stderr: ".join('',@wget_errs); #page and errors outputted on the next line, seems wrong print STDERR "wget stdout: ".join('',@wget_outs); #clean up after this, not shown is running the filtering command, closing and waitpid'ing When I run that wget command directly from the command-line and redirect stderr to a file, something sane happens - the stdout will be the downloaded page, the stderr will contain the info about opening the given page. wget -O - http://10.10.1.72/index.php 2> stderr_test_file When I run wget via open3, I'm getting both the page and the info mixed together in stdout. What I expect is the loaded page in one stream and STDERR from wget in another. I can see I've simplified the code to the point where it's not clear why I want to use open3, but the general plan is that I wanted to stream stdout to another filtering program as I received it, and then at the end I was going to read the stderr from both wget and the filtering program to determine what, if anything went wrong. Other important things: I was trying to avoid writing the wget'd data to a file, then filtering that file to another file, then reading the output. It's key that I be able to see what went wrong, not just reading $? 8 (i.e. I have to tell the user, hey, that IP address is wrong, or isn't the right kind of website, or whatever). Finally, I'm choosing system/open3/exec over other perl-isms (i.e. backticks) because some of the input is provided by untrustworthy users.

  Read the article

• Powershell $LastExitCode=0 but $?=False . Redirecting stderr to stdout gives NativeCommandError

  - by Colonel Panic

  Can anyone explain Powershell's surprising behaviour in the second example below? First, a example of sane behaviour: PS C:\> & cmd /c "echo Hello from standard error 1>&2"; echo "`$LastExitCode=$LastExitCode and `$?=$?" Hello from standard error $LastExitCode=0 and $?=True No surprises. I print a message to standard error (using cmd's echo). I inspect the variables $? and $LastExitCode. They equal to True and 0 respectively, as expected. However, if I ask Powershell to redirect standard error to standard output over the first command, I get a NativeCommandError: PS C:\> & cmd /c "echo Hello from standard error 1>&2" 2>&1; echo "`$LastExitCode=$LastExitCode and `$?=$?" cmd.exe : Hello from standard error At line:1 char:4 + cmd <<<< /c "echo Hello from standard error 1>&2" 2>&1; echo "`$LastExitCode=$LastExitCode and `$?=$?" + CategoryInfo : NotSpecified: (Hello from standard error :String) [], RemoteException + FullyQualifiedErrorId : NativeCommandError $LastExitCode=0 and $?=False My first question, why the NativeCommandError ? Secondly, why is $? False when cmd ran successfully and $LastExitCode is 0? Powershell's docs about_Automatic_Variables don't explicitly define $?. I always supposed it is True if and only if $LastExitCode is 0 but my example contradicts that. Here's how I came across this behaviour in the real-world (simplified). It really is FUBAR. I was calling one Powershell script from another. The inner script: cmd /c "echo Hello from standard error 1>&2" if (! $?) { echo "Job failed. Sending email.." exit 1 } # do something else Running this simply .\job.ps1, it works fine, no email is sent. However, I was calling it from another Powershell script, logging to a file .\job.ps1 2>&1 > log.txt. In this case, an email is sent! Here, the act of observing a phenomenon changes its outcome. This feels like quantum physics rather than scripting! [Interestingly: .\job.ps1 2>&1 may or not blow up depending on where you run it]

  Read the article

• Problem with final branch in a parallel activity

  - by Dan Revell

  This might seem like a silly thing to say, the final branch in a parallel activity so I'll clarify. It's a parallel activity with three branches each containing a simple create task, on task changed and complete task. The branch containing the task that is last to complete seems to break. So every task works in it's own right, but the last one encounters a problem. Say the user clicks the final tasks link to open the attached infopath form and submits that. Execution gets to the event handler for that onTaskChanged where a taskCompleted variable gets set to true which will exit the while loop. I've successfully hit a breakpoint on this line so I know that happens. However the final activity in that branch, the completeTask doesn't get hit. When submit is clicked in the final form, the operation in progess screen says of for quite a while before returning to the workflow status page. The task that was opened and submitted says "Not Started". I can disable any of the branches to leave only two, but the same problem happens with the last to be completed. Earlier on in the workflow I do essencially the same thing. I have another 3 branch parallel activity with each brach containing a task. This one works correctly which leads me to believe that it might be a problem with having two parallel activites in the same sequential workflow. I've considered the possibility that it might be a correlation token problem. The token that every task branch uses is unique to that branch and it's owner activity name is est to that of the branch. It stands to reason that if the task complete variable is indeed getting set to true but the while loop isn't being exited, then there's a wire crossing with the variable somewhere. However I'd still have thought that the task status back on the workflow status page would at least say that the task is in progress. This is a frustrating show stopper of a bug for me. Any thoughts or suggestions would be much appricated so I can investigate them.

  Read the article

• Instagram API and Zend/Loader.php

  - by Jaemin Kim

  I want to use Instagram API and I found this code. <html> <head></head> <body> <h1>Popular on Instagram</h1> <?php // load Zend classes require_once 'Zend/Loader.php'; Zend_Loader::loadClass('Zend_Http_Client'); // define consumer key and secret // available from Instagram API console $CLIENT_ID = 'YOUR-CLIENT-ID'; $CLIENT_SECRET = 'YOUR-CLIENT-SECRET'; try { // initialize client $client = new Zend_Http_Client('https://api.instagram.com/v1/media/popular'); $client->setParameterGet('client_id', $CLIENT_ID); // get popular images // transmit request and decode response $response = $client->request(); $result = json_decode($response->getBody()); // display images $data = $result->data; if (count($data) > 0) { echo '<ul>'; foreach ($data as $item) { echo '<li style="display: inline-block; padding: 25px"><a href="' . $item->link . '"><img src="' . $item->images->thumbnail->url . '" /></a> <br/>'; echo 'By: <em>' . $item->user->username . '</em> <br/>'; echo 'Date: ' . date ('d M Y h:i:s', $item->created_time) . '<br/>'; echo $item->comments->count . ' comment(s). ' . $item->likes->count . ' likes. </li>'; } echo '</ul>'; } } catch (Exception $e) { echo 'ERROR: ' . $e->getMessage() . print_r($client); exit; } ?> </body> </html> In here, I found Zender/Load.php, and I've never heard about that. Is it okay to go http://www.zend.com/en/products/guard/downloads here, and download Zend for linux?? And for another question, is this code available to use Instagram API?? For last, could you let me know that is there any simple code to use Instagram API? Thank you.

  Read the article

• Parallel For Loop - Problems when adding to a List

  - by Kevin Crowell

  I am having some issues involving Parallel for loops and adding to a List. The problem is, the same code may generate different output at different times. I have set up some test code below. In this code, I create a List of 10,000 int values. 1/10th of the values will be 0, 1/10th of the values will be 1, all the way up to 1/10th of the values being 9. After setting up this List, I setup a Parallel for loop that iterates through the list. If the current number is 0, I add a value to a new List. After the Parallel for loop completes, I output the size of the list. The size should always be 1,000. Most of the time, the correct answer is given. However, I have seen 3 possible incorrect outcomes occur: The size of the list is less than 1,000 An IndexOutOfRangeException occurs @ doubleList.Add(0.0); An ArgumentException occurs @ doubleList.Add(0.0); The message for the ArgumentException given was: Destination array was not long enough. Check destIndex and length, and the array's lower bounds. What could be causing the errors? Is this a .Net bug? Is there something I can do to prevent this from happening? Please try the code for yourself. If you do not get an error, try it a few times. Please also note that you probably will not see any errors using a single-core machine. using System; using System.Collections.Generic; using System.Threading.Tasks; namespace ParallelTest { class Program { static void Main(string[] args) { List<int> intList = new List<int>(); List<double> doubleList = new List<double>(); for (int i = 0; i < 250; i++) { intList.Clear(); doubleList.Clear(); for (int j = 0; j < 10000; j++) { intList.Add(j % 10); } Parallel.For(0, intList.Count, j => { if (intList[j] == 0) { doubleList.Add(0.0); } }); if (doubleList.Count != 1000) { Console.WriteLine("On iteration " + i + ": List size = " + doubleList.Count); } } Console.WriteLine("\nPress any key to exit."); Console.ReadKey(); } } }

  Read the article

• windows phone deserialization json

  - by user2042227

  I have a weird issue. so I am making a few calls in my app to a webservice, which replies with data. However I am using a token based login system, so the first time the user enters the app I get a token from the webservice to login for that specific user and that token returns only that users details. The problem I am having is when the user changes I need to make the calls again, to get the new user's details, but using visual studio's breakpoint debugging, it shows the new user's token making the call however the problem is when the json is getting deserialized, it is as if it still reads the old data and deserializes that, when I exit my app with the new user it works fine, so its as if it is reading cached values, but I have no idea how to clear it? I am sure the new calls are being made and the problem lies with the deserializing, but I have tried clearing the values before deserializing them again, however nothing works. am I missing something with the json deserializer, how van I clear its cached values? here I make the call and set it not to cache so it makes a new call everytime: client.Headers[HttpRequestHeader.CacheControl] = "no-cache"; var token_details = await client.DownloadStringTaskAsync(uri); and here I deserialize the result, it is at this section the old data gets shown, so the raw json being shown inside "token_details" is correct, only once I deserialize the token_details, it shows the wrong data. deserialized = JsonConvert.DeserializeObject(token_details); and the class I am deserializing into is a simple class nothing special happening here, I have even tried making the constructor so that it clears the values each time it gets called. public class test { public string status { get; set; } public string name{ get; set; } public string birthday{ get; set; } public string errorDes{ get; set; } public test() { status = ""; name= ""; birthday= ""; errorDes= ""; } } uri's before making the calls: {https://whatever.co.za/token/?code=BEBCg==&id=WP7&junk=121edcd5-ad4d-4185-bef0-22a4d27f2d0c} - old call "UBCg==" - old reply {https://whatever.co.za/token/?code=ABCg==&id=WP7&junk=56cc2285-a5b8-401e-be21-fec8259de6dd} - new call "UBCg==" - new response which is the same response as old call as you can see i did attach a new GUID everytime i make the call, but then the new uri is read before making the downloadstringtaskasync method call, but it returns with the old data

  Read the article

• Getting a screenshot of a page using .NET - Need help with code

  - by Ender

  I'm writing a specialized crawler and parser for internal use and I require the ability to take a screenshot of a web page in order to check what colours are being used throughout. The program will take in around ten web addresses and will save them as a bitmap image, from there I plan to use LockBits in order to create a list of the five most used colours within the image. To my knowledge it's the easiest way to get the colours used within a web page but if there is an easier way to do it please chime in with your suggestions. Anyway, I was going to use this program until I saw the price tag. I'm also fairly new to C#, having only used it for a few months. Can anyone provide me with a solution to my problem of taking a screenshot of a web page in order to extract the colour scheme? EDIT: Sorry for not getting back to this sooner, but I've been busy with some other things. Anyway, the code seems to work well, but the problem I am having right now is that I am running it within a form, and naturally with Application.Run() being called I cannot run two instances of the same form at once. It recommended Form.showDialog() but that broke everything. Can anyone give me a hand with this code? public static void buildScreenshotFromURL(string url) { int width = 800; int height = 600; using (WebBrowser browser = new WebBrowser()) { browser.Width = width; browser.Height = height; browser.ScrollBarsEnabled = true; // This will be called when the page finishes loading browser.DocumentCompleted += new System.Windows.Forms.WebBrowserDocumentCompletedEventHandler(OnDocumentCompleted); //browser.DocumentCompleted += OnDocumentCompleted; browser.Navigate(url); // This prevents the application from exiting until // Application.Exit is called // Application.Run() does not work as it cannot be called twice, recommended form.showDialog() // but still issues Application.Run(); } } public static void OnDocumentCompleted(object sender, WebBrowserDocumentCompletedEventArgs e) { // Define size of thumbnail neded int thumbSize = 50; // Now that the page is loaded, save it to a bitmap WebBrowser browser = (WebBrowser)sender; // Code edited from example below to make smaller bitmap and save as PNG using (Graphics graphics = browser.CreateGraphics()) { using (Bitmap bitmap = new Bitmap(browser.Width, browser.Height, graphics)) { Rectangle bounds = new Rectangle(0, 0, bitmap.Width, bitmap.Height); browser.DrawToBitmap(bitmap, bounds); Bitmap thumbBitmap = new Bitmap(bitmap.GetThumbnailImage(thumbSize, thumbSize, thumbCall, IntPtr.Zero)); thumbBitmap.Save("screenshot.png", ImageFormat.Png); handleImage(thumbBitmap); } }

  Read the article

• Parallel For Loop - Problems when adding to a List - Possible .Net Bugs

  - by Kevin Crowell

  I am having some issues involving Parallel for loops and adding to a List. The problem is, the same code may generate different output at different times. I have set up some test code below. In this code, I create a List of 10,000 int values. 1/10th of the values will be 0, 1/10th of the values will be 1, all the way up to 1/10th of the values being 9. After setting up this List, I setup a Parallel for loop that iterates through the list. If the current number is 0, I add a value to a new List. After the Parallel for loop completes, I output the size of the list. The size should always be 1,000. Most of the time, the correct answer is given. However, I have seen 3 possible incorrect outcomes occur: The size of the list is less than 1,000 An IndexOutOfRangeException occurs @ doubleList.Add(0.0); An ArgumentException occurs @ doubleList.Add(0.0); The message for the ArgumentException given was: Destination array was not long enough. Check destIndex and length, and the array's lower bounds. What could be causing the errors? Is this a .Net bug? Is there something I can do to prevent this from happening? Please try the code for yourself. If you do not get an error, try it a few times. Please also note that you probably will not see any errors using a single-core machine. using System; using System.Collections.Generic; using System.Threading.Tasks; namespace ParallelTest { class Program { static void Main(string[] args) { List<int> intList = new List<int>(); List<double> doubleList = new List<double>(); for (int i = 0; i < 250; i++) { intList.Clear(); doubleList.Clear(); for (int j = 0; j < 10000; j++) { intList.Add(j % 10); } Parallel.For(0, intList.Count, j => { if (intList[j] == 0) { doubleList.Add(0.0); } }); if (doubleList.Count != 1000) { Console.WriteLine("On iteration " + i + ": List size = " + doubleList.Count); } } Console.WriteLine("\nPress any key to exit."); Console.ReadKey(); } } }

  Read the article

• Help to restructure my Doc/View more correctly

  - by Harvey

  Edited by OP. My program is in need of a lot of cleanup and restructuring. In another post I asked about leaving the MFC DocView framework and going to the WinProc & Message Loop way (what is that called for short?). Well at present I am thinking that I should clean up what I have in Doc View and perhaps later convert to non-MFC it that even makes sense. My Document class currently has almost nothing useful in it. I think a place to start is the InitInstance() function (posted below). In this part: POSITION pos=pDocTemplate->GetFirstDocPosition(); CLCWDoc *pDoc=(CLCWDoc *)pDocTemplate->GetNextDoc(pos); ASSERT_VALID(pDoc); POSITION vpos=pDoc->GetFirstViewPosition(); CChildView *pCV=(CChildView *)pDoc->GetNextView(vpos); This seem strange to me. I only have one doc and one view. I feel like I am going about it backwards with GetNextDoc() and GetNextView(). To try to use a silly analogy; it's like I have a book in my hand but I have to look up in it's index to find out what page the Title of the book is on. I'm tired of feeling embarrassed about my code. I either need correction or reassurance, or both. :) Also, all the miscellaneous items are in no particular order. I would like to rearrange them into an order that may be more standard, structured or straightforward. ALL suggestions welcome! BOOL CLCWApp::InitInstance() { InitCommonControls(); if(!AfxOleInit()) return FALSE; // Initialize the Toolbar dll. (Toolbar code by Nikolay Denisov.) InitGuiLibDLL(); // NOTE: insert GuiLib.dll into the resource chain SetRegistryKey(_T("Real Name Removed")); // Register document templates CSingleDocTemplate* pDocTemplate; pDocTemplate = new CSingleDocTemplate( IDR_MAINFRAME, RUNTIME_CLASS(CLCWDoc), RUNTIME_CLASS(CMainFrame), RUNTIME_CLASS(CChildView)); AddDocTemplate(pDocTemplate); // Parse command line for standard shell commands, DDE, file open CCmdLineInfo cmdInfo; ParseCommandLine(cmdInfo); // Dispatch commands specified on the command line // The window frame appears on the screen in here. if (!ProcessShellCommand(cmdInfo)) { AfxMessageBox("Failure processing Command Line"); return FALSE; } POSITION pos=pDocTemplate->GetFirstDocPosition(); CLCWDoc *pDoc=(CLCWDoc *)pDocTemplate->GetNextDoc(pos); ASSERT_VALID(pDoc); POSITION vpos=pDoc->GetFirstViewPosition(); CChildView *pCV=(CChildView *)pDoc->GetNextView(vpos); if(!cmdInfo.m_Fn1.IsEmpty() && !cmdInfo.m_Fn2.IsEmpty()) { pCV->OpenF1(cmdInfo.m_Fn1); pCV->OpenF2(cmdInfo.m_Fn2); pCV->DoCompare(); // Sends a paint message when complete } // enable file manager drag/drop and DDE Execute open m_pMainWnd->DragAcceptFiles(TRUE); m_pMainWnd->ShowWindow(SW_SHOWNORMAL); m_pMainWnd->UpdateWindow(); // paints the window background pCV->bDoSize=true; //Prevent a dozen useless size calculations return TRUE; } Thanks

  Read the article

• Strange results - I obtain same value for all keys

  - by Pietro Luciani

  I have a problem with mapreduce. Giving as input a list of song ("Songname"#"UserID"#"boolean") i must have as result a song list in which is specified how many time different useres listen them... so a output ("Songname","timelistening"). I used hashtable to allow only one couple . With short files it works well but when I put as input a list about 1000000 of records it returns me the same value (20) for all records. This is my mapper: public static class CanzoniMapper extends Mapper<Object, Text, Text, IntWritable>{ private IntWritable userID = new IntWritable(0); private Text song = new Text(); public void map(Object key, Text value, Context context) throws IOException, InterruptedException { /*StringTokenizer itr = new StringTokenizer(value.toString()); while (itr.hasMoreTokens()) { word.set(itr.nextToken()); context.write(word, one); }*/ String[] caratteri = value.toString().split("#"); if(caratteri[2].equals("1")){ song.set(caratteri[0]); userID.set(Integer.parseInt(caratteri[1])); context.write(song,userID); } } } This is my reducer: public static class CanzoniReducer extends Reducer<Text,IntWritable,Text,IntWritable> { private IntWritable result = new IntWritable(); public void reduce(Text key, Iterable<IntWritable> values, Context context) throws IOException, InterruptedException { Hashtable<IntWritable,Text> doppioni = new Hashtable<IntWritable,Text>(); for (IntWritable val : values) { doppioni.put(val,key); } result.set(doppioni.size()); //doppioni.clear(); context.write(key,result); } } and main: Configuration conf = new Configuration(); Job job = new Job(conf, "word count"); job.setJarByClass(Canzoni.class); job.setMapperClass(CanzoniMapper.class); //job.setCombinerClass(CanzoniReducer.class); //job.setNumReduceTasks(2); job.setReducerClass(CanzoniReducer.class); job.setOutputKeyClass(Text.class); job.setOutputValueClass(IntWritable.class); FileInputFormat.addInputPath(job, new Path(args[0])); FileOutputFormat.setOutputPath(job, new Path(args[1])); System.exit(job.waitForCompletion(true) ? 0 : 1); Any idea???

  Read the article

• How can I make my Perl Jabber bot an event-driven program?

  - by TheGNUGuy

  I'm trying to make a Jabber bot and I am having trouble keeping it running while waiting for messages. How do I get my script to continuously run? I have tried calling a subroutine that has a while loop that I, in theory, have set up to check for any messages and react accordingly but my script isn't behaving that way. Here is my source: http://pastebin.com/03Habbvh # set jabber bot callbacks $jabberBot-SetMessageCallBacks(chat=\&chat); $jabberBot-SetPresenceCallBacks(available=\&welcome,unavailable=\&killBot); $jabberBot-SetCallBacks(receive=\&prnt,iq=\&gotIQ); $jabberBot-PresenceSend(type="available"); $jabberBot-Process(1); sub welcome { print "Welcome!\n"; $jabberBot-MessageSend(to=$jbrBoss-GetJID(),subject="",body="Hello There!",type="chat",priority=10); &keepItGoing; } sub prnt { print $_[1]."\n"; } #$jabberBot-MessageSend(to=$jbrBoss-GetJID(),subject="",body="Hello There! Global...",type="chat",priority=10); #$jabberBot-Process(5); #&keepItGoing; sub chat { my ($sessionID,$msg) = @_; $dump-pl2xml($msg); if($msg-GetType() ne 'get' && $msg-GetType() ne 'set' && $msg-GetType() ne '') { my $jbrCmd = &trimSpaces($msg-GetBody()); my $dbQry = $dbh-prepare("SELECT command,acknowledgement FROM commands WHERE message = '".lc($jbrCmd)."'"); $dbQry-execute(); if($dbQry-rows() 0 && $jbrCmd !~ /^insert/si) { my $ref = $dbQry-fetchrow_hashref(); $dbQry-finish(); $jabberBot-MessageSend(to=$msg-GetFrom(),subject="",body=$ref-{'acknowledgement'},type="chat",priority=10); eval $ref-{'command'}; &keepItGoing; } else { $jabberBot-MessageSend(to=$msg-GetFrom(),subject="",body="I didn't understand you!",type="chat",priority=10); $dbQry-finish(); &keepItGoing; } } } sub gotIQ { print "iq\n"; } sub trimSpaces { my $string = $_[0]; $string =~ s/^\s+//; #remove leading spaces $string =~ s/\s+$//; #remove trailing spaces return $string; } sub keepItGoing { print "keepItGoing!\n"; my $proc = $jabberBot-Process(1); while(defined($proc) && $proc != 1) { $proc = $jabberBot-Process(1); } } sub killBot { print "killing\n"; $jabberBot-MessageSend(to=$_[0]-GetFrom(),subject="",body="Logging Out!",type="chat",priority=10); $jabberBot-Process(1); $jabberBot-Disconnect(); exit; }

  Read the article

• Excel UDF calculation should return 'original' value

  - by LeChe

  Hi all, I've been struggling with a VBA problem for a while now and I'll try to explain it as thoroughly as possible. I have created a VSTO plugin with my own RTD implementation that I am calling from my Excel sheets. To avoid having to use the full-fledged RTD syntax in the cells, I have created a UDF that hides that API from the sheet. The RTD server I created can be enabled and disabled through a button in a custom Ribbon component. The behavior I want to achieve is as follows: If the server is disabled and a reference to my function is entered in a cell, I want the cell to display Disabled If the server is disabled, but the function had been entered in a cell when it was enabled (and the cell thus displays a value), I want the cell to keep displaying that value If the server is enabled, I want the cell to display Loading Sounds easy enough. Here is an example of the - non functional - code: Public Function RetrieveData(id as Long) Dim result as String // This returns either 'Disabled' or 'Loading' result = Application.Worksheet.Function.RTD("SERVERNAME", "", id) RetrieveData = result If(result = "Disabled") Then // Obviously, this recurses (and fails), so that's not an option If(Not IsEmpty(Application.Caller.Value2)) Then // So does this RetrieveData = Application.Caller.Value2 End If End If End Function The function will be called in thousands of cells, so storing the 'original' values in another data structure would be a major overhead and I would like to avoid it. Also, the RTD server does not know the values, since it also does not keep a history of it, more or less for the same reason. I was thinking that there might be some way to exit the function which would force it to not change the displayed value, but so far I have been unable to find anything like that. Any ideas on how to solve this are greatly appreciated! Thanks, Che EDIT: By popular demand, some additional info on why I want to do all this: As I said, the function will be called in thousands of cells and the RTD server needs to retrieve quite a bit of information. This can be quite hard on both network and CPU. To allow the user to decide for himself whether he wants this load on his machine, he or she can disable the updates from the server. In that case, he or she should still be able to calculate the sheets with the values currently in the fields, yet no updates are pushed into them. Once new data is required, the server can be enabled and the fields will be updated. Again, since we are talking about quite a bit of data here, I would rather not store it somewhere in the sheet. Plus, the data should be usable even if the workbook is closed and loaded again.

  Read the article

• How to assign class property as display data member in datagridview

  - by KoolKabin

  hi guys, I am trying to display my data in datagridview. I created a class with different property and used its list as the datasource. it worked fine. but I got confused how to do that in case we have nested class. My Classes are as follows: class Category property UIN as integer property Name as string end class class item property uin as integer property name as string property mycategory as category end class my data list as follows: dim myDataList as list(of Item) = new List(of Item) myDataList.Add(new Item(1,"item1",new category(1,"cat1"))) myDataList.Add(new Item(2,"item2",new category(1,"cat1"))) myDataList.Add(new Item(3,"item3",new category(1,"cat1"))) myDataList.Add(new Item(4,"item4",new category(2,"cat2"))) myDataList.Add(new Item(5,"item5",new category(2,"cat2"))) myDataList.Add(new Item(6,"item6",new category(2,"cat2"))) Now I binded the datagridview control like: DGVMain.AutoGenerateColumns = False DGVMain.ColumnCount = 3 DGVMain.Columns(0).DataPropertyName = "UIN" DGVMain.Columns(0).HeaderText = "ID" DGVMain.Columns(1).DataPropertyName = "Name" DGVMain.Columns(1).HeaderText = "Name" DGVMain.Columns(2).DataPropertyName = "" **'here i want my category name** DGVMain.Columns(2).HeaderText = "category" DGVMain.datasource = myDataList DGVMain.refresh() I have tried using mycategory.name but it didn't worked. What can be done to get expected result? Is there any better idea other than this to accomplish the same task? Edited My question as per comment: I have checked the link given by u. It was nice n very usefull. Since the code was in c# i tried to convert it in vb. Everything went good but failed at a point of case sensitive and next one is that i had my nested class name itemcategory and my property name was category. there it arouse the problem. it didn't searched for category but it searched for itemcategory. so confused on it. My Code as follows: Private Sub DGVMain_CellFormatting(ByVal sender As Object, ByVal e As System.Windows.Forms.DataGridViewCellFormattingEventArgs) Handles DGVMain.CellFormatting Dim DGVMain As DataGridView = CType(sender, DataGridView) e.Value = EvaluateValue(DGVMain.Rows(e.RowIndex).DataBoundItem, DGVMain.Columns(e.ColumnIndex).DataPropertyName) End Sub Private Function EvaluateValue(ByRef myObj As Object, ByRef myProp As String) As String Dim Ret As String = "" Dim Props As System.Reflection.PropertyInfo() Dim PropA As System.Reflection.PropertyInfo Dim ObjA As Object If myProp.Contains(".") Then myProp = myProp.Substring(0, myProp.IndexOf(".")) Props = myObj.GetType().GetProperties() For Each PropA In Props ObjA = PropA.GetValue(myObj, New Object() {}) If ObjA.GetType().Name = myProp Then Ret = EvaluateValue(ObjA, myProp.Substring(myProp.IndexOf(".") + 1)) Exit For End If Next Else PropA = myObj.GetType().GetProperty(myProp) Ret = PropA.GetValue(myObj, New Object() {}).ToString() End If Return Ret End Function

  Read the article

• Using WSH (VBS) with iMacros - how do they do it?

  - by Carl

  (iMacros For Firefox 6.6.5.0; Firefox 3.6.3; Windows XP Pro SP3 w/all updates) I made an iMacro to select "load next 25" (comments) on a web page (CNN.COM). Unfortunately, iMacros doesn't appear to do looping (do the above until that string doesn't appear on the page anymore - i.e. all the comments are loaded). I tried putting {!iloop} in the TAG command, and it didn't work - then I read it wouldn't. So I tried the example at http://wiki.imacros.net/Loop_after_Query_or_Login I can't find any information on how to actually run the script in the above example. I searched Google and found VBS scripting is handled with .wsh files with Windows XP Pro. (The examples and other references there say Windows does VBS natively, so I looked up how with Google.) So I made the following .wsh file (modified the above example): Option Explicit Dim iim1, iret 'initialize iMacros instance set iim1 = CreateObject ("imacros") iret = iim1.iimInit() do while not iret < 0 iret = iim1.iimPlay("Load All CNN Comments") loop ' tell user we're done msgbox "End." ' exit iMacros instance and quit script iret = iim1.iimExit() Wscript.Quit() Here's the iMacro: (Load All CNN Comments.iim) VERSION BUILD=6650406 RECORDER=FX TAG POS=1 TYPE=A ATTR=TXT:Load<SP>next<SP>25 WAIT SECONDS=#DOWNLOADCOMPLETE# The iMacro works by itself - I press Play (left iMacro panel) and the next 25 comments load on the CNN.com page in the current tab. I put the .wsh file in the ...\iMacros\Macros directory - with the iMacro "Load All CNN Comments.iim" When I run the .wsh file (by just double clicking on it's icon - I created it with Notepad, and Windows gave it an icon for that file type - it's executable) I get the message from "Windows Script Host" - "There is no script file specified." I wasn't actually expecting it to work, as I don't see how Windows would know to call iMacros to run the iim macro. It would be nice if there was a simple, COMPLETE, example of how to use a VBS script with iMacros, that isn't bogged down with unnecessary complication like filling in a form, loading multiple pages, etc. I can't find ANY example. So what do I need to do to get this to work? I just installed iMacros yesterday, because I am constantly having the problem that there are hundred of comments after a CNN.com article, and loading 25 more at a time until they are all on the page makes it impractical to read any replies to my comments. It would also be nice if I could run the Macro from Firefox, rather than by double clicking on some file somewhere. Thanks for any help.

  Read the article

• Removing elements from heap

  - by user193138

  I made a heap. I am curious if there's something subtley wrong with my remove function: int Heap::remove() { if (n == 0) exit(1); int temp = arr[0]; arr[0] = arr[--n]; heapDown(0); arr[n] = 0; return temp; } void Heap::heapDown(int i) { int l = left(i); int r = right(i); // comparing parent to left/right child // each has an inner if to handle if the first swap causes a second swap // ie 1 -> 3 -> 5 // 3 5 1 5 1 3 if (l < n && arr[i] < arr[l]) { swap(arr[i], arr[l]); heapDown(l); if (r < n && arr[i] < arr[r]) { swap(arr[i], arr[r]); heapDown(r); } } else if (r < n && arr[i] < arr[r]) { swap(arr[i], arr[r]); heapDown(r); if (l < n && arr[i] < arr[l]) { swap(arr[i], arr[l]); heapDown(l); } } } Here's my output i1i2i3i4i5i6i7 p Active heap: 7 4 6 1 3 2 5 r Removed 7 r Removed 6 p Active heap: 5 3 4 1 2 Here's my teacher's sample output: p Active heap : 7 4 6 1 3 2 5 r Removed 7 r Removed 6 p Active heap : 5 4 2 1 3 s Heapsorted : 1 2 3 4 5 While our outputs are completely different, I do seem to hold maxheap principle of having everything left oriented and for all nodes parent child(in every case I tried). I try to do algs like this from scratch, so maybe I'm just doing something really weird and wrong (I would only consider it "wrong" if it's O(lg n), as removes are intended to be for heaps). Is there anything in particular "wrong" about my remove? Thanks, http://ideone.com/PPh4eQ

  Read the article

• Error building C program

  - by John

  Here are my 2 source files: main.c: #include <stdio.h> #include "part2.c" extern int var1; extern int array1[]; int main() { var1 = 4; array1[0] = 2; array1[1] = 4; array1[2] = 5; array1[3] = 7; display(); printf("---------------"); printf("Var1: %d", var1); printf("array elements:"); int x; for(x = 0;x < 4;++x) printf("%d: %d", x, array1[x]); return 0; } part2.c #include <stdio.h> int var1; int array1[4]; void display(void); void display(void) { printf("Var1: %d", var1); printf("array elements:"); int x; for(x = 0;x < 4;++x) printf("%d: %d", x, array1[x]); } When i try to compile the program this is what i get: Ld /Users/John/Library/Developer/Xcode/DerivedData/Test-blxrdmnozbbrbwhcekmouessaprf/Build/Products/Debug/Test normal x86_64 cd /Users/John/Xcode/Test setenv MACOSX_DEPLOYMENT_TARGET 10.7 /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/clang -arch x86_64 -isysroot /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.7.sdk -L/Users/John/Library/Developer/Xcode/DerivedData/Test-blxrdmnozbbrbwhcekmouessaprf/Build/Products/Debug -F/Users/John/Library/Developer/Xcode/DerivedData/Test-blxrdmnozbbrbwhcekmouessaprf/Build/Products/Debug -filelist /Users/John/Library/Developer/Xcode/DerivedData/Test-blxrdmnozbbrbwhcekmouessaprf/Build/Intermediates/Test.build/Debug/Test.build/Objects-normal/x86_64/Test.LinkFileList -mmacosx-version-min=10.7 -o /Users/John/Library/Developer/Xcode/DerivedData/Test-blxrdmnozbbrbwhcekmouessaprf/Build/Products/Debug/Test ld: duplicate symbol _display in /Users/John/Library/Developer/Xcode/DerivedData/Test-blxrdmnozbbrbwhcekmouessaprf/Build/Intermediates/Test.build/Debug/Test.build/Objects-normal/x86_64/part2.o and /Users/John/Library/Developer/Xcode/DerivedData/Test-blxrdmnozbbrbwhcekmouessaprf/Build/Intermediates/Test.build/Debug/Test.build/Objects-normal/x86_64/main.o for architecture x86_64 clang: error: linker command failed with exit code 1 (use -v to see invocation) I am using Xcode and both files are inside of a C project called Test What is causing the error and how do i fix it?

  Read the article

• Element to string in HTMLDocument

  - by kalpesh

  i have a Element object its a HTMLDocument object and i want to string value of this element. i want this result Christina Toth, Pharm. D. ======================= plz see below code. public static void main(String args[]) throws Exception { InputStream is = Nullsoft.getInputStream(); InputStreamReader isr = new InputStreamReader(is); BufferedReader br = new BufferedReader(isr); HTMLEditorKit htmlKit = new HTMLEditorKit(); HTMLDocument htmlDoc = (HTMLDocument) htmlKit.createDefaultDocument(); HTMLEditorKit.Parser parser = new ParserDelegator(); HTMLEditorKit.ParserCallback callback = htmlDoc.getReader(0); parser.parse(br, callback, true); // Parse ElementIterator iterator = new ElementIterator(htmlDoc); Element element; while ((element = iterator.next()) != null) { AttributeSet attributes = element.getAttributes(); Object name = attributes.getAttribute(StyleConstants.NameAttribute); if ((name instanceof HTML.Tag) && ((name == HTML.Tag.DIV) || (name == HTML.Tag.H2) || (name == HTML.Tag.H3))) { StringBuffer text = new StringBuffer(); int count = element.getElementCount(); for (int i = 0; i < count; i++) { Element child = element.getElement(i); AttributeSet childAttributes = child.getAttributes(); // if (childAttributes.getAttribute(StyleConstants.NameAttribute) == HTML.Tag.CONTENT) { int startOffset = child.getStartOffset(); int endOffset = child.getEndOffset(); int length = endOffset - startOffset; text.append(htmlDoc.getText(startOffset, length)); } } System.out.println(name + ": " + text.toString()); } } System.exit(0); } public static InputStream getInputStream() { String text = "<html>\n" + "<head>\n" + "<title>pg_0001</title>\n" + "\n" + "<style type=\"text/css\">\n" + ".ft3{font-style:normal;font-weight:bold;font-size:11px;font-family:Helvetica;color:#000000;}\n" + "</style>\n" + "</head>\n" + "<body vlink=\"#FFFFFF\" link=\"#FFFFFF\" bgcolor=\"#ffffff\">\n" + "\n" + "\n" + "<div style=\"position:absolute;top:597;left:252\"><nobr><span class=\"ft3\">Christina Toth, Pharm. D.</span></nobr></div>\n" + "\n" + "\n" + "</body>\n" + "</html>"; InputStream is = null; try { is = new ByteArrayInputStream(text.getBytes("UTF-8")); } catch (UnsupportedEncodingException e) { e.printStackTrace(); } return is; }

  Read the article

• Display all images from outside web root folder using PHP

  - by micmola

  Hello, I want to display all images that are stored outside my web root folder. Please help me. I am only able to display one image repeatedly. For example, if I have 5 images in my folder, only one image is displayed on my browser 5 times. Please help me on this. I've been working on this problem for over a month now. I'm a newbie. Help. Thank you. Here is the code I'm using. images.php <?php // Get our database connector require("includes/copta.php"); // Grab the data from our people table $sql = "select * from people"; $result = mysql_query($sql) or die ("Could not access DB: " . mysql_error()); $imgLocation = " /uploadfile/"; while ($row = mysql_fetch_array($result)) { $imgName = $row["filename"]; $imgPath = $imgLocation . $imgName; echo "<img src=\"call_images.php?imgPath=" . $imgName . "\" alt=\"\"><br/>"; echo $row['id'] . " " . $imgName. "<br />"; } ?> call_images.php <?php // Get our database connector require("includes/copta.php"); $imgLocation = '/ uploadz/'; $sql = "select * from people"; $result = mysql_query($sql) or die ("Could not access DB: " . mysql_error()); while ($row = mysql_fetch_array($result)) { $imgName = $row["filename"]; $imgPath = $imgLocation . $imgName; // Make sure the file exists if(!file_exists($imgPath) || !is_file($imgPath)) { header('HTTP/1.0 404 Not Found'); die('The file does not exist'); } // Make sure the file is an image $imgData = getimagesize($imgPath); if(!$imgData) { header('HTTP/1.0 403 Forbidden'); die('The file you requested is not an image.'); } // Set the appropriate content-type // and provide the content-length. header("Pragma: public"); header("Expires: 0"); header("Cache-Control: must-revalidate, post-check=0, pre-check=0"); header("Content-Type: image/jpg"); header("Content-length: " . filesize($imgPath)); // Print the image data readfile($imgPath); exit(); } ?>

  Read the article

• Php miniserver downloader bandwidth

  - by snikolov

  $httpsock = @socket_create_listen("9090"); if (!$httpsock) { print "Socket creation failed!\n"; exit; } while (1) { $client = socket_accept($httpsock); $input = trim(socket_read ($client, 4096)); $input = explode(" ", $input); $input = $input[1]; $fileinfo = pathinfo($input); switch ($fileinfo['extension']) { default: $mime = "text/html"; } if ($input == "/") { $input = "index.html"; } $input = ".$input"; if (file_exists($input) && is_readable($input)) { echo "Serving $input\n"; $contents = file_get_contents($input); $output = "HTTP/1.0 200 OK\r\nServer: APatchyServer\r\nConnection: close\r\nContent-Type: $mime\r\n\r\n$contents"; } else { //$contents = "The file you requested doesn't exist. Sorry!"; //$output = "HTTP/1.0 404 OBJECT NOT FOUND\r\nServer: BabyHTTP\r\nConnection: close\r\nContent-Type: text/html\r\n\r\n$contents"; $filename = "dada"; $file = fopen($filename, 'r'); $filesize = filesize($filename); $buffer = fread($file, $filesize); $send = array("Output"=$buffer,"filesize"=$filesize,"filename"=$filename); $file = $send['filename']; $filesize = $send['filesize']; $output = 'HTTP/1.0 200 OK\r\n'; $output .= "Content-type: application/octet-stream\r\n"; $output .= 'Content-Disposition: attachment; filename="'.$file.'"\r\n'; $output .= "Content-Length:$filesize\r\n"; $output .= "Accept-Ranges: bytes\r\n"; $output .= "Cache-Control: private\n\n"; $output .= $send['Output']; $output .= "Content-Transfer-Encoding: binary"; $output .= "Connection: Keep-Alive\r\n"; } socket_write($client, $output); socket_close ($client); } socket_close ($httpsock); Hello i have create a code here to work as a webserver downloader the client can request files and download, i got it working at last however, i would like to know if the webserver can show much bandwidth the user request via sockets, perl has the same option as php but its more hardcore than php, i dont understand much about perl, i even saw that a miniwebserver can show much the client user pulls from the server would it be possible that you can assist me with this coding, i much aprreciate it thank you guys.

  Read the article

< Previous Page | 279 280 281 282 283 284 285 286 287 288 289 290  | Next Page >