Search Results

Search found 13059 results on 523 pages for 'security hole'.

Page 283/523 | < Previous Page | 279 280 281 282 283 284 285 286 287 288 289 290  | Next Page >

  • Can I use this power supply + case combination without causing problems?

    - by evan
    I am putting together a computer with a Antec P180 case and a Thermaltake TR2 RX 650 W power supply. The problem is that the Antec P180 case has a separate compartment for the power supply. With an opening for the on/off switch + ac connector to one side, a wall with a small hole for cables to route through on top, a wall on the bottom, and on the other side a fan which pushes air from the hard drive compartment to the power supply compartment. I think the design of the case assumes the power supplies fan is on the side next to the on/off switch, but the fan on the power supply I have is on top, which makes me worry about overheating the power supply. There is about half an inch between the top of the power supply and the wall and the other fan should keep air flowing to push out the air that the power supply pushes upwards. Do you think this setup should work, or should I go get another power supply? Thanks!! PS: This computer will be running an Ubuntu server, so it will always be on, but the rest of the components shouldn't be generating as much heat as they would on say a gaming machine.

    Read the article

  • PHP ignores upload_tmp_dir?

    - by Matthias Vance
    LS, I am using IIS7 with PHP (FastCGI). I set up the upload_tmp_dir to "X:\Temp" instead of leaving it empty, but it's still using "C:\Windows\Temp" for some reason. I did give the following users full rights : NETWORK SERVICE, (application pool user), IIS_IUSRS. I also restarted IIS after I made the change. I tried to create a directory inside the correct temp path using PHP, and that did work, so it's not a security issue. Kind regards, Matthias Vance

    Read the article

  • Graphite SQLite3 DatabaseError: attempt to write a readonly database

    - by Anadi Misra
    Running graphite under apache httpd, with slqite database, I have the correct folder permissions [root@liaan55 httpd]# ls -ltr /var/lib | grep graphite drwxr-xr-x. 2 apache apache 4096 Aug 23 19:36 graphite-web and [root@liaan55 httpd]# ls -ltr /var/lib/graphite-web/ total 68 -rw-r--r--. 1 apache apache 65536 Aug 23 19:46 graphite.db syncdb also seems to have gone fine [root@liaan55 httpd]# sudo -su apache bash-4.1$ whoami apache bash-4.1$ python /usr/lib/python2.6/site-packages/graphite/manage.py syncdb /usr/lib/python2.6/site-packages/graphite/settings.py:231: UserWarning: SECRET_KEY is set to an unsafe default. This should be set in local_settings.py for better security warn('SECRET_KEY is set to an unsafe default. This should be set in local_settings.py for better security') /usr/lib/python2.6/site-packages/django/conf/__init__.py:75: DeprecationWarning: The ADMIN_MEDIA_PREFIX setting has been removed; use STATIC_URL instead. "use STATIC_URL instead.", DeprecationWarning) /usr/lib/python2.6/site-packages/django/core/cache/__init__.py:82: DeprecationWarning: settings.CACHE_* is deprecated; use settings.CACHES instead. DeprecationWarning Creating tables ... Creating table account_profile Creating table account_variable Creating table account_view Creating table account_window Creating table account_mygraph Creating table dashboard_dashboard_owners Creating table dashboard_dashboard Creating table events_event Creating table auth_permission Creating table auth_group_permissions Creating table auth_group Creating table auth_user_user_permissions Creating table auth_user_groups Creating table auth_user Creating table django_session Creating table django_admin_log Creating table django_content_type Creating table tagging_tag Creating table tagging_taggeditem You just installed Django's auth system, which means you don't have any superusers defined. Would you like to create one now? (yes/no): yes Username (leave blank to use 'apache'): root E-mail address: [email protected] Password: Password (again): Superuser created successfully. Installing custom SQL ... Installing indexes ... Installed 0 object(s) from 0 fixture(s) bash-4.1$ exit and the local-settings.py file is as follows STORAGE_DIR = '/var/lib/graphite-web' INDEX_FILE = '/var/lib/graphite-web/index' DATABASES = { 'default': { 'NAME': '/var/lib/graphite-web/graphite.db', 'ENGINE': 'django.db.backends.sqlite3', 'USER': '', 'PASSWORD': '', 'HOST': '', 'PORT': '' } } I still get this error [Sat Aug 23 19:47:17 2014] [error] [client 10.42.33.238] File "/usr/lib/python2.6/site-packages/django/db/backends/sqlite3/base.py", line 344, in execute [Sat Aug 23 19:47:17 2014] [error] [client 10.42.33.238] return Database.Cursor.execute(self, query, params) [Sat Aug 23 19:47:17 2014] [error] [client 10.42.33.238] DatabaseError: attempt to write a readonly database not sure what is missing in this configuration

    Read the article

  • how to disable remote wipe for Exchange 2010 ActiveSync?

    - by RMNVM
    When connecting android mobile devices to Exchange ActiveSync some require granting device administrator privileges which permit an exchange administrator to remotely wipe the phone. The warning messages are scaring some mobile users and turning them away from using Exchange ActiveSync altogether. How can I disable his functionality on Exchange Server 2010? [security breaches are not an issue here]

    Read the article

  • Practical differences between OpenBSD and FreeBSD?

    - by simon
    I have OpenBSD installed as a router/firewall, and have been thinking about trying either OpenBSD or FreeBSD out as a desktop system, as well. What kind of practical differences (not philosophical, like "OpenBSD's focus is security" [those are well explained at wikipedia ) are there between FreeBSD and OpenBSD? E.g. default shell, different commands or ways of configuring things etc.?

    Read the article

  • Error with postgres and Rails in Bundle Install on Ubuntu 12.10

    - by jason328
    I'm trying to install postgres onto Ubuntu. When running the Bundle Install in terminal I'm receiving this message at the end of the running code. How do I get pg to install properly? Libpq-dev is installed as well. Using coffee-rails (3.2.2) Using diff-lcs (1.1.3) Using jquery-rails (2.0.2) Installing pg (0.12.2) with native extensions Gem::Installer::ExtensionBuildError: ERROR: Failed to build gem native extension. /usr/bin/ruby1.9.1 extconf.rb checking for pg_config... yes Using config values from /usr/bin/pg_config checking for libpq-fe.h... yes checking for libpq/libpq-fs.h... yes checking for PQconnectdb() in -lpq... yes checking for PQconnectionUsedPassword()... yes checking for PQisthreadsafe()... yes checking for PQprepare()... yes checking for PQexecParams()... yes checking for PQescapeString()... yes checking for PQescapeStringConn()... yes checking for PQgetCancel()... yes checking for lo_create()... yes checking for pg_encoding_to_char()... yes checking for PQsetClientEncoding()... yes checking for rb_encdb_alias()... yes checking for rb_enc_alias()... no checking for struct pgNotify.extra in libpq-fe.h... yes checking for unistd.h... yes checking for ruby/st.h... yes creating extconf.h creating Makefile make compiling compat.c compiling pg.c pg.c: In function ‘pgconn_wait_for_notify’: pg.c:2117:3: warning: ‘rb_thread_select’ is deprecated (declared at /usr/include/ruby- 1.9.1/ruby/intern.h:379) [-Wdeprecated-declarations] pg.c: In function ‘pgconn_block’: pg.c:2592:3: error: format not a string literal and no format arguments [-Werror=format- security] pg.c:2598:3: warning: ‘rb_thread_select’ is deprecated (declared at /usr/include/ruby- 1.9.1/ruby/intern.h:379) [-Wdeprecated-declarations] pg.c:2607:4: error: format not a string literal and no format arguments [-Werror=format- security] pg.c: In function ‘pgconn_locreate’: pg.c:2866:11: warning: variable ‘lo_oid’ set but not used [-Wunused-but-set-variable] pg.c: In function ‘find_or_create_johab’: pg.c:3947:3: warning: implicit declaration of function ‘rb_encdb_alias’ [-Wimplicit- function-declaration] cc1: some warnings being treated as errors make: *** [pg.o] Error 1 Gem files will remain installed in /home/jason/.bundler/tmp/10083/gems/pg-0.12.2 for inspection. Results logged to /home/jason/.bundler/tmp/10083/gems/pg-0.12.2/ext/gem_make.out An error occurred while installing pg (0.12.2), and Bundler cannot continue. Make sure that `gem install pg -v '0.12.2'` succeeds before bundling.

    Read the article

  • Ubuntu 12.04: apt-get "failed to fetch"; apt is trying to fetch via old static IP

    - by gabe
    Sample error: W: Failed to fetch http://security.ubuntu.com/ubuntu/dists/precise-security/universe/i18n/Translation-en Unable to connect to 192.168.1.70:8118: Now this was working just fine until I changed the IP this morning. I have the server set to a static IP of 10.0.1.70 and for years it has been 192.168.1.70 - the IP apt-get is trying to use right now. I use privoxy and tor thus the 8118 port. Like I said it all worked until I changed the static IP from 192.168.1.70 to 10.0.1.70. I was forced to do so because of router issues. (Long and involved story, I didn't really want to change the IP because I know something like this would happen.) The setup for TOR/Privoxy requires that has you point Privoxy at TOR via 127.0.0.1:9050. Then point curl, etc to Privoxy via $HOME/.bashrc. Typically you would set the listen to IP for Privoxy to 127.0.0.1 but if you want it accessible to the rest of the LAN you set the IP to the server's LAN IP. Which I did a long time ago and was working fine until this morning. I have changed all instances of 192.168.1.70 to 10.0.1.70 in both /etc/privoxy/config and $HOME/.bashrc. What makes this really strange for me is that curl is working fine. I curl icanhazip.com and voila I get a new IP every 10 minutes or so. I curl CNN.com and I get the short but sweet permanently moved to www.cnn.com message I expect. Firefox works fine. Ping works fine. And I've tested all of this via Remote Desktop over my LAN. So the connection appears to be fine for everything except apt. I've also rebooted hoping that would clear 192.168.1.70 from apt. So the connection to the internet and DNS aren't an issue for these programs. And they are, as far as I can tell, using Privoxy/TOR just fine. The real irony here is that I've tried to open up Privoxy to go to Ubuntu's servers directly without going through TOR to speed up the downloads from Ubuntu (did this months ago). So somewhere that I have not been able to find, apt has stored the IP 192.168.1.70. And 192.168.1.70 is no longer valid. Thanks for the help

    Read the article

  • Windows Server 2003 IPSec Tunnel Connected, But Not Working (Possibly NAT/RRAS Related)

    - by Kevinoid
    Configuration I have setup a "raw" IPSec tunnel between a Windows Server 2003 (SBS) machine and a Netgear FVG318 according to the instructions in Microsoft KB816514. The configuration is as follows (using the same conventions as the article): NetA | SBS2003 | FVG318 | NetB 10.0.0.0/24 | 216.x.x.x | 69.y.y.y | 10.0.254.0/24 Both the Main Mode and Quick Mode Security Associations are successfully completed and appear in the IP Security Monitor. I am also able to ping the SBS2003 server on its private address from any computer on NetB. The Problem Any traffic sent from a computer on NetA to NetB, or from SBS2003 to NetB (excluding ICMP Ping responses), is sent out on the public network interface outside the IPSec tunnel (no encryption or header authentication, as if the tunnel were not there). Pings sent from a computer on NetB to a computer on NetA successfully reach computers on NetA, but the responses are silently discarded by SBS2003 (they do not go out in the clear and do not generate any encrypted traffic). Possible Solutions Incorrect Configuration I could have mistyped something, somewhere, or KB816514 could be incorrect in some way. I have tried very hard to eliminate the first option. Have re-created the configuration several times, tried tweaking and adjusting all the settings I could without success (most prevent the SA from being established). NAT/RRAS I have seen multiple posts elsewhere suggesting that this could be due to interaction between NAT and the IPSec filters. Possibly the NetA private addresses get rewritten to 216.x.x.x before being compared with the Quick Mode IPSec filters and don't get tunneled because of the mismatch. In fact, The Cable Guy article from June 2005 "TCP/IP Packet Processing Paths" suggests that this is the case, (see step 2 and 4 of the Transit Traffic path). If this is the case, is there a way to exclude NetA-NetB traffic from NAT? Any thoughts, ideas, suggestions, and/or comments are appreciated. Update (2011-06-26) After failing to solve the problem, I resorted to paid Microsoft support. They were unable to solve the problem. Since then I have implemented a solution based on Linux that is working quite well. I will attempt to evaluate any proposed answers as best I can, but current configurations and time constraints will make this slow...

    Read the article

  • Running Apache 2.2 as another user on Windows Server 2008 R2

    - by futureelite7
    Hi, I would like to run apache as a limited user on Windows 2008 R2 for security reasons. I've created a user in the user group (let's call it apache), and set the user to run as in the services pane, but then I am unable to start the service (probably not enough permission to bind to port 80). What is the minimum privileges needed to run apache on windows 2008, or what should I do to allow the user apache to bind apache 2.2 to port 80? Thanks!

    Read the article

  • Why is my cat5e cable not okay?

    - by torbengb
    My LAN cable seems to work (indicator LED lights up) but the computer can't find a connection. What's wrong? Setup: I had to run a network cable from a router in one room to a computer to another room, through a hole in the wall that was too small to pass the RJ-45 plug through. The plug was cut off and the cable passed through the wall. Then a new plug was crimped on using this detailed explanation. The connection didn't work because the (factory-made!) plug in the other end used a non-standard wire order. I crimped a new plug on again, using the exact same order of the factory-made plug. The LED indicator lights up on both ends, but the computer cannot find a connection. What can be wrong? How can I find out? I don't have a cable tester. By visually inspecting my new plug, I think it's good; the wire order matches the other end, and all wires are all the way inside the plug and reach the connector piece. I've used the cable before (with both factory-made ends) so i don't think that the cable itself has a defect.

    Read the article

  • Vmware Player Network adaptors have no network or internet access in windows 7 enterprise

    - by daffers
    As per the title. My VMWare player installation has setup the two network adaptor VMnet1 and VMnet8 and they are picked up as unidentified networks with no network access (i need this to activate my windows server installation on it). The option to change the network location is not available (this might be because of network policy on the domain despite having set this as configurable in the local security policy section). Is there anyway i can change how these networks are detected or alter the configuration of vmware to get around this?

    Read the article

  • Assign fixed IP address via DHCP by DNS lookup

    - by Janoszen
    Preface I'm building a virtualization environment with Ubuntu 14.04 and LXC. I don't want to write my own template since the upgrade from 12.04 to 14.04 has shown that backwards compatibility is not guaranteed. Therefore I'm deploying my virtual machines via lxc-create, using the default Ubuntu template. The DNS for the servers is provided by Amazon Route 53, so no local DNS server is needed. I also use Puppet to configure my servers, so I want to keep the manual effort on the deployment minimal. Now, the default Ubuntu template assigns IP addresses via DHCP. Therefore, I need a local DHCP server to assign IP addresses to the nodes, so I can SSH into them and get Puppet running. Since Puppet requires a proper DNS setup, assigning temporary IP addresses is not an option, the client needs to get the right hostname and IP address from the start. Question What DHCP server do I use and how do I get it to assign the IP address based only on the host-name DHCP option by performing a DNS lookup on that very host name? What I've tried I tried to make it work using the ISC DHCP server, however, the manual clearly states: Please be aware that only the dhcp-client-identifier option and the hardware address can be used to match a host declaration, or the host-identifier option parameter for DHCPv6 servers. For example, it is not possible to match a host declaration to a host-name option. This is because the host-name option cannot be guaranteed to be unique for any given client, whereas both the hardware address and dhcp-client-identifier option are at least theoretically guaranteed to be unique to a given client. I also tried to create a class that matches the hostname like this: class "my-client-name" { match if option host-name = "my-client-name"; fixed-address my-client-name.my-domain.com; } Unfortunately the fixed-address option is not allowed in class statements. I can replace it with a 1-size pool, which works as expected: subnet 10.103.0.0 netmask 255.255.0.0 { option routers 10.103.1.1; class "my-client-name" { match if option host-name = "my-client-name"; } pool { allow members of "my-client-name"; range 10.103.1.2 10.103.1.2; } } However, this would require me to administer the IP addresses in two places (Amazon Route53 and the DHCP server), which I would prefer not to do. About security Since this is only used in the bootstrapping phase on an internal network and is then replaced by a static network configuration by Puppet, this shouldn't be an issue from a security standpoint. I am, however, aware that the virtual machine bootstraps with "ubuntu:ubuntu" credentials, which I intend to fix once this is running.

    Read the article

  • ltsp-built-client error

    - by sat
    I am facing some issues while building a thin client using the ltsp-build-client, it says an error. Error is: I: Retrieving Release E: Failed getting release file file://root/ISO/ubuntu-12.04.1-desktop-i386.iso/dists/squeeze/Release error: LTSP client installation ended abnormally My Command is: ltsp-build-client --mirror file://root/ISO/ubuntu-12.04.1-desktop-i386.iso --security-mirror none --accept-unsigned-packages I am referring this URL http://wiki.debian.org/LTSP/Howto. How to solve this error?

    Read the article

  • ProCurve network expansion

    - by Blue Warrior NFB
    I've hit a bit of a wall with our network scale-out. As it stands right now: We have five ProCurve 2910al switches connected as above, but with 10GbE connections (two CX4, two fiber). This fully populates the central switch above, there will be no more 10GbE Ethernet connections from that device. This group of switches is not stacked (no stack directive). Sometime in the next two or three months I'll need to add a sixth, and I'm not sure how deep of a hole I'm in. Ideally I'd replace the core switch with something more capable and has more 10GbE ports. However, that's a major outage and that requires special scheduling. The two edge switches connected via fiber have dual-port 10GbE cards in them, so I could physically put another switch on the far end of one of those. I don't know how much of a good or bad idea that would be though. Is that too many segments between end-points? Some config-excerpts: Running configuration: ; J9147A Configuration Editor; Created on release #W.14.49 hostname "REDACTED-SW01" time timezone 120 module 1 type J9147A module 2 type J9008A module 3 type J9149A no stack trunk B1 Trk3 Trunk trunk B2 Trk4 Trunk trunk A1 Trk11 Trunk trunk A2 Trk12 Trunk vlan 15 name "VM-MGMT" untagged Trk2,Trk5,Trk7 ip helper-address 10.1.10.4 ip address 10.1.11.1 255.255.255.0 tagged 37-40,Trk3-Trk4,Trk11-Trk12 jumbo ip proxy-arp exit

    Read the article

  • Windows computer account appears to reset its own password, why?

    - by David Yu
    Has anyone seen this where a computer account appears to reset its password? The password for user 'WEST\SQLCLUSTER$' was reset by 'WEST\SQLCLUSTER$' on 'DOMAINCONTROLLER.WEST.company.corp' at '04/23/10 20:47:41' Event Type: Success Audit Event Source: Security Event Category: Account Management Event ID: 628 Date: Friday, April 23, 2010 Time: 8:47 PM User: WEST\SQLCLUSTER$ Computer: DOMAINCONTROLLER.WEST.company.corp Description: User Account password set: Target Account Name: SQLCLUSTER$ Target Domain: WEST Target Account ID: WEST\SQLCLUSTER$ Caller User Name: SQLCLUSTER$ Caller Domain: WEST Caller Logon ID: (0x0,0x7A518945)

    Read the article

  • IE9 Error: There was a pr?blem sending the command to the program

    - by HK1
    I'm working on a new/fresh Windows 7 32bit machine that now has IE9 installed. The user is using the Dell Stardock application as his primary "desktop" (all his links there). When we place an internet link there and click on it we get the following error message: There was a problem sending the command to the program. To me this indicates that IE9 is having trouble going to the website we want to go to, which should get passed as a parameter to the browser when it opens. I don't think this is a StarDock/ObjectDock problem because we also have some other problems with internet links. For example, we cannot move an internet link from the Desktop to the Quick Launch on the task bar. When we do try, it forces us to put the link with the IE icon as part of the IE menu instead of allowing us to have a shortcut there as it's own entry. I should mention however, that links on the desktop and in the taskbar do work as we expect them too (without showing the above error message). It appears that this problem started after installing Windows Updates. Since we installed a whole bunch of updates at once I have no idea which one caused the problem. I did have Google Chrome installed but I uninstalled it since the user wants to use IE. The problem started before I uninstalled Chrome. I also reset the browser settings on IE9. It didn't help. Next I uninstalled IE9 which took me back to IE8. This actually did resolve the problem but the problem came back as soon as I installed IE9 again. We have Verizon Internet Security installed. It's actually a McAfee product rebranded to look like Verizon. I'm not real crazy over this software but the customer has a subscription so we're not planning to change it. I have no reason to believe that this is causing the problem and yet I know that security software is often to blame for strange issues. I've looked at the registry settings for the following keys and everything appears to be ok for every single one of them: HKEY_CLASSES_ROOT\.htm HKEY_CLASSES_ROOT\.html HKEY_CLASSES_ROOT\http\shell\open\command HKEY_CLASSES_ROOT\http\shell\open\ddeexec\Application HKEY_CLASSES_ROOT\https\shell\open\command HKEY_CLASSES_ROOT\https\shell\open\ddeexec\Application HKEY_CLASSES_ROOT\htmlfile\shell\open\command HKEY_CLASSES_ROOT\Microsoft.Website\Shell\Open\Command Edit1: I've found two potential solutions but I won't be able to try them until tomorrow. One is to disable the "Windows Font Cache" service. Another is to clear IE cache and browsing history. I won't be able to try out either solution until tomorrow since this is a remote client's machine. I see there are lots of other suggestions online but if you take the time to read them through you'll see that the other suggestions didn't fix the problem.

    Read the article

  • Can I have a single solid state drive and a RAID array on the same machine?

    - by jaminto
    Hi- To summarize, i'm looking to use a single solid state drive as my primary drive, and two conventional sata drives in a RAID 1 configuration for data. I am trying to install 64-bit Windows 7 onto this configuration. Is this possible? Here are the details: I built a desktop that has been running 64-bit Vista on two 500Gb in a RAID 1 array for a few years. I just purchased an Intel X25-M 80Gb Sata Solid-State Drive, and was planning on using this a my primary drive, and keeping the RAID 1 array as my data drive. I added the SSD drive and in the RAID setup, configured it as a RAID 0 array of only one disk. Then, I tried to do a clean install of windows 7 64-bit, but got stuck in the "Missing driver for CD/DVD drive" black hole of selecting driver files and Windows telling me that i don't have the appropriate driver for my hardware. The missing hardware is NOT a CD/DVD drive, since i'm installing off of my only CD/DVD drive. Plus at one point i was able to point it at a driver for my raid controller, and then my hard drives magically showed up as browsable sources for finding drivers for some other unnamed device that setup couldn't recognize. After a few hours of trying drivers (this was a very slow process) i decided to reboot and look at the BIOS settings. I'm using an ASUS M2A-VM motherboard which has an ATI SB600 RAID controller on board. I switched the "On board SATA Type" setting from "SATA" to "AHCI" thinking that since AHCI is an Intel thing, this would help. Unfortunately, this abandoned my RAID configuration, and my previously mirrored drives are showing up as separate drives when i boot into my current windows installation. Am i trying to do the impossible here? Should i just buy a separate SATA/RAID PCI card and plug the SSD into that? Any help would be greatly appreciated.

    Read the article

  • How to boot linux direct to application on console with no login

    - by amanda
    I have a need to start an application on bootup on the linux console and I do not have a need for any type of login or security. I do not need any ALT-F1,F2,etc virtual consoles but I would like to allow SSH access via the network port for debugging, loading, etc. The application is a SDL graphics program running with fbcon as the SDL_VIDEODRIVER if that matters. I'm currently using Fedora 10 and 12 but any distro that supports SDL using the fbcon framebuffer would be acceptable.

    Read the article

  • Using nginx's proxy_redirect when the response location's domain varies

    - by Chalky
    I am making an web app using SoundCloud's API. Requesting an MP3 to stream involves two requests. I'll give an example. Firstly: http://api.soundcloud.com/tracks/59815100/stream This returns a 302 with a temporary link to the actual MP3 (which varies each time), for example: http://ec-media.soundcloud.com/xYZk0lr2TeQf.128.mp3?ff61182e3c2ecefa438cd02102d0e385713f0c1faf3b0339595667fd0907ea1074840971e6330e82d1d6e15dd660317b237a59b15dd687c7c4215ca64124f80381e8bb3cb5&AWSAccessKeyId=AKIAJ4IAZE5EOI7PA7VQ&Expires=1347621419&Signature=Usd%2BqsuO9wGyn5%2BrFjIQDSrZVRY%3D The issue I had was that I am attempting to load the MP3 via JavaScript's XMLHTTPRequest, and for security reasons the browser can't follow the 302, as ec-media.soundcloud.com does not set a header saying it is safe for the browser to access via XMLHTTPRequest. So instead of using the SoundCloud URL, I set up two locations in nginx, so the browser only interacts with the server my app is hosted on and no security errors come up: location /soundcloud/tracks/ { # rewrite URL to match api.soundcloud.com's URL structure rewrite \/soundcloud\/tracks\/(\d*) /tracks/$1/stream break; proxy_set_header Host api.soundcloud.com; proxy_pass http://api.soundcloud.com; # the 302 will redirect to /soundcloud/media instead of the original domain proxy_redirect http://ec-media.soundcloud.com /soundcloud/media; } location /soundcloud/media/ { rewrite \/soundcloud\/media\/(.*) /$1 break; proxy_set_header Host ec-media.soundcloud.com; proxy_pass http://ec-media.soundcloud.com; } So myserver/soundcloud/tracks/59815100 returns a 302 to /myserver/soundcloud/media/xYZk0lr2TeQf.128.mp3...etc, which then forwards the MP3 on. This works! However, I have hit a snag. Sometimes the 302 location is not ec-media.soundcloud.com, it's ak-media.soundcloud.com. There are possibly even more servers out there and presumably more could appear at any time. Is there any way I can handle an arbitrary 302 location without having to manually enter each possible variation? Or is it possible for nginx to handle the redirect and return the response of the second step? So myserver/soundcloud/tracks/59815100 follows the 302 behind the scenes and returns the MP3? The browser automatically follows the redirect, so I can't do anything with the initial response on the client side. I am new to nginx and in a bit over my head so apologies if I've missed something obvious, or it's beyond the scope of nginx. Thanks a lot for reading.

    Read the article

  • How can I keep track of SQL Server updates?

    - by Adrian Grigore
    Hi, If I am not mistaken, SQL server cannot be automatically updated via the regular windows backup routine. Instead, there are cummulative updates that need to be installed by hand. I assume this is done for security and stability reasons. Is this correct? If so, how can I keep track of new updates without regularly reading SQL server related blogs? Is there any low-volume newsletter I can subscribe (ideally only announcing critical updates)?

    Read the article

  • netsh wlan add profile not importing passphrase

    - by sirlancelot
    I exported a wireless network connection profile from a Windows 7 machine correctly connected to a WiFi network with a WPA-TKIP passphrase. The exported xml file shows the correct settings and a keyMaterial node which I can only guess is the encrypted passphrase. When I take the xml to another Windows 7 computer and import it using netsh wlan add profile filename="WiFi.xml", it correctly adds the profile's SSID and encryption type, but a balloon pops up saying that I need to enter the passphrase. Is there a way to import the passphrase along with all other settings or am I missing something about adding profiles? Here is the exported xml with personal information removed: <?xml version="1.0"?> <WLANProfile xmlns="http://www.microsoft.com/networking/WLAN/profile/v1"> <name>[removed]</name> <SSIDConfig> <SSID> <hex>[removed]</hex> <name>[removed]</name> </SSID> <nonBroadcast>false</nonBroadcast> </SSIDConfig> <connectionType>ESS</connectionType> <connectionMode>auto</connectionMode> <autoSwitch>false</autoSwitch> <MSM> <security> <authEncryption> <authentication>WPAPSK</authentication> <encryption>TKIP</encryption> <useOneX>false</useOneX> </authEncryption> <sharedKey> <keyType>passPhrase</keyType> <protected>true</protected> <keyMaterial>[removed]</keyMaterial> </sharedKey> </security> </MSM> </WLANProfile> Any help or advice is appreciated. Thanks.

    Read the article

  • Googlebot repeatedly looks for files that aren't on my server

    - by John at CashCommons
    I'm hosting a site for a volunteer organization. I've moved the site to WordPress, but it wasn't always that way. I suspect at one point it was hacked badly. My Apache error log file has grown to 122 kB in just the past 18 hours. The large majority of the errors logged are of this form -- it's repeated hundreds of times today alone in my log files: [Mon Nov 12 18:29:27 2012] [error] [client xx.xxx.xx.xxx] File does not exist: /home/*******/public_html/*******.org/calendar.php [Mon Nov 12 18:29:27 2012] [error] [client xx.xxx.xx.xxx] File does not exist: /home/*******/public_html/*******.org/404.shtml (I verified that xx.xxx.xx.xxx was a Google server.) I suspect there was a security hole somewhere before, likely in calendar.php, that was exploited. The files don't exist anymore, but there may be many backlinks that exist that reference here, hence why googlebot is so interested in crawling them. How do I fix this gracefully? I still would like Google to index the site. I just want to tell it somehow not to look for these files anymore.

    Read the article

  • Excluding executables in winsxs folder

    - by Yasser Sobhdel
    I am facing a big problem since there are many msbuild.exe files in .Netframework and winsxs folders and I don't know if it is required to set all of them as trusted in the antivirus. The path changes server to server and hence it makes life harder! If it matters to you, I am using Kaspersky endpoint security 10. When defining trusted application, as far as I know, you must point exactly to the executable with hard-coded path. Thanks

    Read the article

  • Copy .exe to Explorer.exe!

    - by Phillip
    What would happen if an ordinary .exe file is copied to explorer.exe? Will it be automatically running as long as explorer.exe is running? This seems like a major security whole...is it even possible? Does anti-virus protect against that sort of thing?

    Read the article

< Previous Page | 279 280 281 282 283 284 285 286 287 288 289 290  | Next Page >