Search Results

Search found 28881 results on 1156 pages for 'good quess'.

Page 284/1156 | < Previous Page | 280 281 282 283 284 285 286 287 288 289 290 291  | Next Page >

• How to set up multiple SSIDs with bandwidth limiting on a single wireless router?

  - by Rahul Narain

  I have an Asus WL-520GU wireless router connected to a cable modem that I use for wireless internet access in my apartment. I would like to set it up so that it provides two SSIDs: one secured and password-protected for my regular use, and a "guest" SSID that's unsecured but throttled to, say, 10% of the available bandwidth. What is the most straightforward way to do this? I've been looking into DD-WRT and Tomato, both of which support my router. DD-WRT supports setting up multiple SSIDs using the GUI, but I don't know if it's possible to limit the bandwidth of each SSID independently; point #12 in this FAQ thread says it's not possible to limit by day or by MAC address, which is discouraging but not conclusive. Tomato allows bandwidth limits in its QoS settings, going by the screenshot here, but multiple SSID support is still experimental and it doesn't look like it will work with the encryption settings or bandwidth limits in the GUI. I'd like to know a good way to do this which gives me the fewest opportunities for screwing up. I'm no stranger to the command line, if that turns out to be what's necessary, but if so, please explain what the commands are doing because I don't have a good mental model of what needs to happen to set this up.

  Read the article

• HTTP responses curl and wget different results

  - by Fab

  To check HTTP response header for a set of urls I send with curl the following request headers foreach ( $urls as $url ) { // Setup headers - I used the same headers from Firefox version 2.0.0.6 $header[ ] = "Accept: text/xml,application/xml,application/xhtml+xml,"; $header[ ] = "text/html;q=0.9,text/plain;q=0.8,image/png,*/*;q=0.5"; $header[ ] = "Cache-Control: max-age=0"; $header[ ] = "Connection: keep-alive"; $header[ ] = "Keep-Alive: 300"; $header[ ] = "Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7"; $header[ ] = "Accept-Language: en-us,en;q=0.5"; $header[ ] = "Pragma: "; // browsers keep this blank. curl_setopt( $ch, CURLOPT_URL, $url ); curl_setopt( $ch, CURLOPT_USERAGENT, 'Googlebot/2.1 (+http://www.google.com/bot.html)'); curl_setopt( $ch, CURLOPT_HTTPHEADER, $header); curl_setopt( $ch, CURLOPT_REFERER, 'http://www.google.com'); curl_setopt( $ch, CURLOPT_HEADER, true ); curl_setopt( $ch, CURLOPT_NOBODY, true ); curl_setopt( $ch, CURLOPT_RETURNTRANSFER, true ); curl_setopt( $ch, CURLOPT_FOLLOWLOCATION, true ); curl_setopt( $ch, CURLOPT_HTTPAUTH, CURLAUTH_ANY ); curl_setopt( $ch, CURLOPT_TIMEOUT, 10 ); //timeout 10 seconds } Sometimes I receive 200 OK which is good other time 301, 302, 307 which I consider good as well, but other times I receive weird status as 406, 500, 504 which should identify an invalid url but when I open it on the browser they are fine for example the script returns http://www.awe.co.uk/ => HTTP/1.1 406 Not Acceptable and wget returns wget http://www.awe.co.uk/ --2011-06-23 15:26:26-- http://www.awe.co.uk/ Resolving www.awe.co.uk... 77.73.123.140 Connecting to www.awe.co.uk|77.73.123.140|:80... connected. HTTP request sent, awaiting response... 200 OK Does anyone know which request header I am missing or adding in excess?

  Read the article

• Fresh Proxmox VE 2.1 installation with defaults can't be reached or pinged

  - by Damainman

  I am using the lastest Proxmox VE 2.1. My server has two NICS with a uplink only connected into eth0. My Server is a co-located server utilizing public IPv4 IPs. It is not behind a firewall or any system which monitors traffic. Via IPKVM I did a fresh install of Proxmox, I put in the correct IP, Mask, Gateway, and DNS information. The install went perfectly fine with no errors. Upon completion and rebooting the system: I am unable to reach the web GUI via the browser, it just times out. I am unable to ping the server. I am unable to ping outside to the Internet from within the server. Tried pinging out to 4.2.2.2 and yahoo.com I tried rebooting the server and restarting the network service. IFCONFIG shows my IP information under vmbro0 which also has the same MAC address as the eth0 device. eth0 only displays a IPv6 Scope:Link address, which I did not setup myself. This is my first time installing proxmox, but after searching for a few hours it doesn't seem like anyone else is having the same issue as me from a fresh install with just the defaults. So far the only thing I did was install it. Also, I know the network cable is good and the IP is good because I was running a Xen XCP server with the same network settings prior to wiping it to install proxmox. Some additional information: for pveversion -v (Installed proxmox-ve_2.1-f9b0f63a-26.iso) pve-manager: 2.1-1 (pve-manager/2.1/f9b0f63a) running kernel: 2.6.32-11-pve proxmox-ve-2.6.32: 2.0-66 netstat -nr (note: .136 is my network, and .137 is my gateway) Destination - Gateway - Genmask xxx.xxx.xxx.136 - 0.0.0.0 - 255.255.255.248 0.0.0.0 - xxx.xxx.xxx.137 - 0.0.0.0 /etc/network/interfaces auto lo iface lo inet loopback auto vmbr0 iface vmbr0 inet static address xxx.xxx.xxx.138 netmask 255.255.255.248 gateway xxx.xxx.xxx.137 bridge_ports eth0 bridge_stp off bridge_fd 0

  Read the article

• Bluehost Emails Getting Blocked

  - by colithium

  A site for my client has the run-of-the-mill "website with users" email pattern. Create an account, get an activation email. Get an email when a subscription is expiring, etc. The site is hosted on Bluehost and currently it uses php's mail() function. There isn't much configuration that is allowed (as far as I know). The trouble is, about a third of these emails disappear into the void. They aren't in spam or junk folders, there's no bounce message, they just cease to exist. I've read about Bluehost email troubles but I can't figure out what my options are for fixing it. These aren't marketing emails, ie they have user-specific information contained within them. I suppose if a solution offers a good templating system that would be fine. What are my options? Excerpt of headers when delivered to a Gmail address: Received-SPF: neutral (google.com: 00.000.000.000 is neither permitted nor denied by best guess record for domain of domain@box###.bluehost.com) client-ip=00.000.000.000; DomainKey-Status: good Authentication-Results: mx.google.com; spf=neutral (google.com: 00.000.000.000 is neither permitted nor denied by best guess record for domain of domain@box###.bluehost.com) smtp.mail=domain@box###.bluehost.com; domainkeys=pass [email protected]

  Read the article

• Trying to delete directory with "rm -rf", but get message that it's not empty

  - by Ben Hocking

  I've tried deleting a directory using "rm -rf" and I'm getting the message "Directory not empty": Bens-MacBook-Pro:please benjaminhocking$ ls -lart empty_directory/ total 16 drwxr-xr-x 5 benjaminhocking staff 170 Aug 27 14:46 . drwxr-xr-x 3 benjaminhocking staff 102 Aug 27 15:28 .. Bens-MacBook-Pro:please benjaminhocking$ rm -rf empty_directory/ rm: empty_directory/: Directory not empty Bens-MacBook-Pro:please benjaminhocking$ rmdir empty_directory/ rmdir: empty_directory/: Directory not empty If I try the same thing using Finder (dragging the folder to the Trash), I get the message The operation can’t be completed because the item “empty_directory” is in use. I've tried doing xattr -d com.apple.quarantine, purely out of superstition, but it did no good. A probably important piece of context is that this directory was initially in a directory that should've been deleted by a "make clean" command I issued prior to Terminal locking up on me, after which a little over half of the other programs I had running also locked up, including Skype, and eventually the OS itself. I ended up having to reboot the computer by pressing and holding the power key. Edit to add: Another important piece of information I left off was that this was happening in an encrypted folder à la encfs. I was able to track down the corresponding folder in the encrypted side of things and delete it there. I still don't know why I couldn't do it from the decrypted side of things like I normally do. I'll leave this unanswered for now in case anyone has a good answer for that.

  Read the article

• I need scanning software to use with my scanner.

  - by D Connors

  So, I got this (HP F4280) printer/scanner about a year ago, and I'm really happy with it. The only thing is that I never really liked the HP scanning software that came with it. A few months ago I reformatted and reinstalled windows 7. Then, once I plugged in the printer, I noticed that windows recognized it automatically, and offered to install all the drivers by itself. So instead of manually installing the driver that came in the CD, I simply let windows automatically install it from its servers, and so far it's great. Instead of HP's scanning software (that really wasn't pleasing me), I got a very simplified interface that is more than enough for my ocasional scanning habits. Until today. Today I had to scan a bunch of old pictures for my father. And that simple interface felt like it was lacking quite a few features to make this repetitive task a little easier. And that's why I'm now looking for a good software to use for scanning. By "good" I mean anything well thought out, and specially anything that will make my life easier when repetitive-scanning. It doesn't need to have professional tweaking options, but having them is not a problem either. You guys got anything?

  Read the article

• Securing SSH/SFTP and best practices on security

  - by MultiformeIngegno

  I'm on a fresh VPS with Ubuntu Server 12.04. I wanted to ask you the good practices to apply to enhance security over a stock Ubuntu-server. This is what I did up to now: I added Google Authenticator to SSH, then I created a new user (whom I'll use instead of 'root' for SSH & SFTP access) which I added to my /etc/sudoers list below 'root', so now it's: # User privilege specification root ALL=(ALL:ALL) ALL new_user ALL=(ALL:ALL) ALL Then I edited sshd_config and set PermitRootLogin to 'no'. Then restarted the ssh service. Is this ok? There are a few things I'd like to ask you though: 1) What's the sense of adding a new (sudoer) user whilst the root user still exist (ok it can't access with root privilege but it's still there..)? 2) System files are owned by 'root'.. I want to use my new_user to access via SFTP but with it I can't edit those files!! Should I mass-CHMOD 'em so that new_user has write perms too? What's the good practice on this? Thanks in advance, I hope you'll tell me if I did something wrong and/or other ways to secure the system. :)

  Read the article

• sudo or acl or setuid/setgid ?

  - by Xavier Maillard

  Hi, for a reason I do not really understand, everyone wants sudo for all and everything. At work we even have as many entries as there are way to read a logfile (head/tail/cat/more, ...). I think, sudo is defeating here. I'd rather use a mix of setgid/setuid directories and add ACL here and there but I really need to know what are the best practices before starting up. Our servers have %admin, %production, %dba, %users -i.e many groups and many users. Each service (mysql, apache, ...) has its own way to install privileges but members of the %production group must be able to consult configuration file or even log files. There is still the solution to add them into the right groups (mysql...) and set the good permission. But I do not want to usermod all users, I do not want to modify standards permissions since it could change after each upgrade. On the other hand, setting acls and/or mixing setuid/setgid on directories is something I could easily do without "defacing" the standard distribution. What do you think about this ? Taking the mysql example, that would look like this: setfacl d:g:production:rx,d:other::---,g:production:rx,other::--- /var/log/mysql /etc/mysql Do you think this is good practise or should I definetely usermod -G mysql and play with standard permissions system ? Thank you

  Read the article

• Rebuild Apple RAID set

  - by Clinton Blackmore

  We have a Mac Pro tower with an Apple RAID card in it using third party drives. When one drive failed, we replaced it and the RAID 5 set was nearly done rebuilding when the computer was rebooted. It did not come back up. We are now booting up off of a different internal volume, and have three (third-party) drives of identical spec (including revision and firmware) in the box. One of the drives is a global spare; the other two are recognized as belong to a RAID set but are in "Roaming" mode. The intention is to recreate the three-drive RAID set using the data on the two drives that are good. When we tell the system to create a RAID 5 using the three drives, it tells us that it'll create a RAID set but everything will be lost. There are no obvious options to rebuild a RAID using the two good drives and incorporating the third drive in Apple's RAID Utility, and we've looked through the options for the raidutil command. Fortunately, all important data is backed up, and we can rebuild from scratch, but, is there any way to make the RAIDset work again?

  Read the article

• ESX 4.0 space: DASD, NAS, or ?

  - by thormj

  I put together an ESX box for better management, but its performance is a WTF item; I'm a noob at dealing with ESX, so I'm looking for a laundry-list of reading material to help me straighten this out so I can go back to .NET programming. Current storage system: We're running Raid5+Hotspare (8x500 GB spindles) on a PERC6i on a Dell 2910. Due to ESX limitatios, the PERC is showing the storage as 1x2TB + 1x800GB "partitions." I'm not sure of the setup's configuration (stride / stripe / ???) at all. Our Applications We have a SBS server as well as a minor (2x50 GB, but growing at 10GB/month) database server... Our application that lives on the database VM is CPU and I/O insense; it's a database churning excercise mixed in with a lot of computation on the data (fixing that performance is what I'm supposed to be working on)... Perfomance Issue When I do a backup, restore, or worse (copy a backup from 1 vm to another to move it to the QA VM), the entire system slows to a crawl (even "unrelated" VMs). I originally thought a DASD situation would be quite good since you had PCI-x bandwidth, but the systemwide slowdown is killing productivity. Questions What should I do to make an intelligent decision about NAS vs RAID vs SAN vs DASD? Are there sweet spots/ugly spots in the storage setup? Can you use a SSD PCI-X card in ESX for the tempdb? Good/Bad idea? Is there any way to "share" some image in a copy-on-write fashion? Most of the "Backup-Copy-Restore" is to "put a clean image on the dev boxes"; if I could have them "share" the master image, the "big copy" (2x50 GB) would only need to be done once per week instead of once per dev per week...[runtime performance isn't a concern with the dev boxes, but the backup/copy/restore kills production, SBS, and everything else on the box]

  Read the article

• Will Intel be releasing anymore 6-core processors soon?

  - by jasondavis

  I am about to start buying parts every week for as long as it takes me to build the best PC I can build. I am looking at the Intel i7-920 processor right now because it is about 250$ and it is a quad-core processor based on the x58 chipset I believe. From what I have read so far, intel is coming out with some 6-core processors soon that will also use the x58 chipset and will allow me to use the same motherboard and memory/ram to upgrade to a 6-core. This sounds really good to me right now. I just read that the new 6-core processor. The Core i7-980X (extreme edition) was just released which is the first 6-core processor but it is supposed to be around $1,000 so I will probably just get the i7-920 for now and then upgrade to the 6-core version when the price goes down. The motherboard I am looking at getting the GIGABYTE GA-X58A-UD5 which is around $280 at newegg.com So that is my basic plan SO far. I have not purchased any parts yet. I am just wanting to ask if this sounds like a good idea or if I should wait longer if I am wanting to eventually have a 6-core processor. Does anyone know if Intel is planning on releasing any other 6-core processor in addition to the Core i7-980X in the near future? I just want to make sure I am buying the best setup for my money if I am going all out on it, thanks for any tips/advice.

  Read the article

• Is there an high quality natural text reader for the mac?

  - by Another Registered User

  I'm reading about 150 pages of text on screen, every day. I will have to read about 15.000 in the next upcoming months. No joke. Well, the problem is this: I suffer from a sort of attention deficit hyperactivity disorder which forces me to read every sentence up to 10 times until I really get it. Mac OS X Snow Leopard has a built-in text reader with the name "Alex". Although it is already pretty good quality, I know there are far better natural sounding voices out there. I have heard already voices that are absolutely amazing compared to Alex. They're so good, that you can't tell anymore the difference between a real person or a computer. Alex still has this "metal factor" in its voice, which makes my ears hurt after 8 hours of listening. The next problem with Alex is, that he never makes a break after a sentence. Also, it's not possible to think about a sentence and then continue reading. It's also not possible to have him repeat a sentence, without tedious text selection and shortcut usage. Actually, the best tool I can imagine would have the option to read a sentence and move on to the next one after pressing a special key, OR repeating the previously one after pressing a special key. That would help so much! And if that's even with one of those bell lab / AT&T / whatever super-natural voices, even better! But it would be already a great relief if there was just a better tool to control Alex. To let him make breaks after sentences or let him speak big chunks of text sentence-by-sentence with fine-grained control over repetition and moving on. Is there anything?

  Read the article

• Optical Audio out stuck on on a MacBook

  - by Clinton Blackmore

  Apple have made an interesting headphone port for the MacBook (and some other Intel Mac models). It works like a standard jack: nothing plugged in - audio comes out of built-in speakers headphones/external speakers plugged in - plays through headphones/external speakers but you can also use a special adapter (which trips a tiny microswitch) to get an optical audio out signal (which you can presumably plug into a nice surround-sound system). This is all well and good except when, like auto-tracking, it doesn't work, and you are left with nothing to adjust. Users report that they get no sound when they have nothing plugged in and that a red light emanates from the headphone port. If you go to System Preferences - Sound - Output, it will say (IIRC) "Optical Out" instead of "Internal Speakers". The only solution I'm aware of is to try to reset the switch by inserting and removing a set of headphones or a toothpick, perhaps wiggling it inside of the port, and hoping that you luck out and get it. Are there other ways to fix this problem? Does anyone know where the microswitch is or have a good technique to reset it?

  Read the article

• Getting Apache to serve same directory with different authentication over SSL?

  - by Lasse V. Karlsen

  I have set up VisualSVN server, a Subversion server that internally uses Apache, to serve my subversion repositories. I've managed to integrate WebSVN into it as well, and just now was able to get it to serve my repositories through WebSVN without having to authenticate, ie. no username or password prompt comes up. This is good. However, with this set up there is apparently no way for me to authenticate to WebSVN at all, which means all my private repositories are now invisible as far as WebSVN goes. I noticed there is a "Listen 81" directive in the .conf file, since I'm running the server on port 81 instead of 80, so I was wondering if I could set up a https:// connection to a different port, that did require authentication? The reason I need access to my private repositories is that I have linked my bug tracking system to the subversion repositories, so if I click a link in the bug tracking system, it will take me to diffs for the relevant files in WebSVN, and some products are in private repositories. Here's my Location section for WebSVN: <Location /websvn/> Options FollowSymLinks SVNListParentPath on SVNParentPath "C:/Repositories/" SVNPathAuthz on AuthName "Subversion Repository" AuthType Basic AuthBasicProvider file AuthUserFile "C:/Repositories/htpasswd" AuthzSVNAccessFile "C:/Repositories/authz" Satisfy Any Require valid-user </Location> Is there any way I can set up a separate section for a different port, say 8100, that does not have the Satisfy Any directive there, which is what enable anonymous access. Note that a different sub-directory on the server is acceptable as well, so /websvn_secure/, if I can make a location section for that and effectively serve the same content only without the Satisfy Any directive, that'd be good too.

  Read the article

• Starting my own server - basic recommendations and questions [closed]

  - by Ilia Rostovtsev

  Possible Duplicate: Can you help me with my capacity planning? I'm planning to start my own high-performance server and then use collocation services for keeping it up and running. I'm planning to USE it for processing videos and keeping big video site up! (using FFMpeg, MENcoder and etc.) I just need recommendations on whether listed hardware is good enough and will work together well and fast enough. Do I need anything else (missed something). I remember about CPU coolers though! ;) I'm planning to use SSD drives so please tell me if it's going to work just as regular HDDs (but much faster)? Are they going to be used as RAID (is this possible for SSDs)? Here is what I would like to get: Intel ® Server System SR1600URHSR (Urbanna) or Intel® Server System SR1695WBAC 2 x Intel Xeon X5650 4 x 16Gb DDR-III 1333MHz Kingston ECC Reg (KVR13R9D4/16) 3 x (or maybe 4x) 480Gb SSD Intel 520 Series (SSDSC2CW480A3K5) Which server system would be better? Is listed hardware new/good enough and worth buying it at the moment? Should I probably take a look at something slightly more expensive but more up to date and powerful, may be? After all as software I would like to use CentOS 6 64 bit + WHM/CPanel? Any other suggestions on maybe cheaper and same/more powerful server management system but WHM? What most important points to keep in mind when starting/maintaining your own server?

  Read the article

• Add shortcuts to (Windows + X) context menu

  - by KasiyA

  I want to add services.msc into Win+X context menu in windows 8 (x64). I know similar question is in here but it's not good with using Win+X Editor, because it doesn't add Underlined key for shortcuts that added with that and it's not good without having quickly underlined key. I want do that for maually Context menu folder is: C:\Users\User_Name\AppData\Local\Microsoft\Windows\WinX And hide desktop.ini files is as bellows (in ...\WinX\group2\desktop.ini) [LocalizedFileNames] 1 - Run.lnk=@%SystemRoot%\system32\shell32.dll,-12710 4 - Control Panel.lnk=@%SystemRoot%\system32\shell32.dll,-4161 5 - Task Manager.lnk=@%SystemRoot%\system32\authui.dll,-12139 3 - Windows Explorer.lnk=@%SystemRoot%\system32\shell32.dll,-22067 2 - Search.lnk=@%SystemRoot%\system32\shell32.dll,-30517 I copied sevices.msc shortcut into above path in group2 folder and add this line 6 - Sevices.lnk=@%SystemRoot%\system32\sevices.msc,????? in desktop.ini file. First Question: I don't know If this line 6 - Sevices.lnk=@%SystemRoot%\system32\sevices.msc,-????? that I added is correct or not? Also I don't know what to use instead of -????? Last Question: Why desktop.ini contents is not Sorted. I triyed to manually sort them but when I restart Explorer again it was become out of order.Why?

  Read the article

• Why are my socks proxies slow

  - by vps_newcomer

  I have a linux vps, and i have tried a few socks proxy setups to test their performance: All tests were using speedtest.net The standard ssh tunnel proxy 0.8mbit/s download and 0.1-0.2mbit/s upload speeds dante-server proxy 1.3mbit/s download and 0.4-0.5mbit/s upload I am wondering why are these speeds so slow? Is anything shaping them? Is it just the nature of socks proxies? I know that the ssh tunnel has to do encryption and what not so that is why its slow, but i was surprised to see that the second setup was also quite slow. On the VPS i have received download speeds of 25MB/s per second (thats about 200mbit/s and upload speed of atleast 5MB/s (haven't got a good enough pipe to test anything faster). The other option i was going to try is to setup OpenVPN and see how that goes, however i need to find a good tutorial as it's fairly complicated to setup. So why is it so slow? How can i test to see where the bottleneck is? How can i make it faster :D

  Read the article

• Suggestions on the best home server rack cabinet

  - by allentown

  I have a lot of gear in a colocation facility right now. Some of it is going to come home with me now. I do not know anything about the "rack mount" side of the industry. I lease a rack, and I put my stuff in it. I have a few 1U boxes, a few 2U boxes, and a few 4U boxes. 1U switch. One is a new Xserve, which means it is deep. I think I can get by with around 12U to 18U. I want to keep it as small as possible, since I do not have a lot of spare space at my home. I will not be able to bolt to the wall, floor etc, so it should not be tall. This is something I would love to more or less just be a box that sits on the floor but gives me the ability to mount nicely, do nice cable management etc. Are the "post" style racks junk? I am liking the open space, and the no limitations on depth of something like this: http://www.rackmountsolutions.net/images/products/Martin-relay-rack.jpg However, that thing is way too tall, and probably way too expensive. I am looking to be around $300.00 or less. More if I have to, though I would prefer not to. These look near perfect: (See comment for this link, the system will not let me post a second url) but I am worried the Xserve will not fit in it. If anyone has any good links, or website recommendations of good past experience, I would appreciate it. I am almost considering that I may be able to build something with random scraps of stuff at Home Depot as well.

  Read the article

• Proper High-End Video Editing Software for Windows?

  - by Michael Stum

  I'm wondering if anyone here has experience with Prosumer/High-End Video Editing? So far I use Adobe Premiere CS4, but it is an unstable and buggy mess sadly. This could be partially caused by the fact that my input material isn't always pure HDV/AVCHD but sometimes it can be DivX or some already pre-processed video. The one thing I liked about Adobe is though that with After Effects and Encore, they have a good overall toolset, but if it's sub-par then it's no good. Luckily it is already paid for and was worth it's money overall, so It's not a complete waste of money. But are there alternatives? Especially After Effects is quite unique, and the closest thing I found is Apple's Final Cut Studio which includes Motion and DVD Studio. The two downsides is that it requires a Mac and that it doesn't support BluRay though. Any hints for Windows? Sony Vegas might be something I'll look at, but I'm guessing I have to keep using After Effects for some serious compositing/VFX?

  Read the article

• Motherboard running rather hot while gaming

  - by I take Drukqs

  Case: Antec 1200 Mobo: Gigabyte GA-X58A-UD3R CPU: Intel i7 950 (stock cooler) GPU: EVGA GeForce 570 GTX RAM: 2x 2 GB (4 GB total) DDR3 dual-channel Corsair OS: Windows 7 Home Premium 64-bit This is my first build and it's brand new. I had no problems putting it all together in a few hours one evening and I consider myself to be pretty good with computers. Not to brag or anything like that! Just saying I've been fiddling with them since I was in diapers and I have a good amount of experience under my belt, just not with certain things yet. Recently while playing many of the latest games maxed out without a hitch my motherboard has been running hot and like anyone who's ever built a computer it scares the life out of me. I checked HWMonitor and saw that my motherboard sometimes reached temperatures of around 52 - 78c (the number 78 obviously being what's scaring me). I was wondering if such a temperature is normal and if not what the problem could be. Air flow in my case is phenomenal and besides having to ship back a faulty GPU and reseat my CPU my first build has been a very large success which I am enjoying tremendously. There is literally almost no dust in my case due to it being very new as previously mentioned and my RAM sticks are in the correct slots for dual-channel mode. My cable management is pretty great in my opinion with only cables from my PSU lingering in the bottom of the case. At any given opportunity I ran my cables behind my mobo. Air flow should definitely not be a problem because my CPU only goes up to about 60c and my GPU only goes up to about 80c. Thank you very much in advance.

  Read the article

• Sandra reports my CPU as "Engineering Sample", how can I be sure this is correct?

  - by stevenvh

  I ran SiSoftware's Sandra on my new PC, and for my CPU it reports: Generation : G8 / T29 Name : TN0 (Trinity) FX/Opteron 32nm (ES) Revision/Stepping : 0 : 10 / 1 Stepping Mask : TN-A1 Microcode : MU6F10010F The (ES) is a well-known code in product development, meaning "Engineering Sample". Those are beta versions of the CPU, which still may contain some bugs, or even have features switches off. I contacted both the PC's manufacturer Medion as well as AMD about this. I had to downvote the Medion helpdesk here. The person I talked to boldly said Sandra was wrong (without knowing how Sandra got this information; he didn't even know the software), and used the word "impossible". His conclusion was "We’re not taking this in consideration for service”. Right. So, if you like Medion for their good prices, but like good support even better, you may consider buying your PC elsewhere. AMD was more helpful, but wanted to be sure before replacing the part (which I find reasonable). They suggested that I dismount the cooler from the CPU to check what was printed on it to be sure. I'm a bit reluctant here: I would have to wipe the thermal paste from the CPU, and won't know for sure my cooling will still be OK afterwards. Questions Has anybody actually found a confirmed ES CPU in her PC? Is anybody aware of Sandra erroneously reporting CPUs as Engineering Samples? How can you tell an ES, apart from the print on the package? Shouldn't Stepping Mask identify the CPU uniquely?

  Read the article

• Allow incoming connections on Windows Server 2008 R2

  - by Richard-MX

  Good day people. First, im new to Windows Server. I've always used Linux/Apache combo, but, my client has and AWS EC2 Windows Server 2008 R2 instance and he wants everything in there. Im working with IIS and PHP enabled as Fast-CGI and everything is working, but, i cant see the websites stored in it from internet. The public DNS that AWS gave us for that instance is: http://ec2-XX-XXX-XXX-121.us-west-2.compute.amazonaws.com/ But, if i copy paste that address, i get nothing, no IIS logo or something like that. My common sense tells me that maybe the firewall could be blocking the access. Can anyone help me and tell where to enable some rules to get this thing working? I don't wanna start enabling rules at random and make the system insecure. If you need any additional info, you can ask me and i will provide it. Thanks in advance. UPDATE: Amazon EC2 display this: Public DNS: ec2-XX-XXX-XXX-121.us-west-2.compute.amazonaws.com Private DNS: ip-XX-XXX-XX-252.us-west-2.compute.internal Private IPs: XX.XXX.XX.25 In my test microinstance, i just to use the Public DNS address (the one that starts with "ec2") and it works like a charm (of course, the micro instance have its own Public DNS im not assuming same address for both instances...) However, for the large instance, i tried to do the same. Set up everything as in the micro instance but if i use the Public DNS, it doesnt load anything. Im suspicious about the Windows Firewall, but, the HTTP related stuff is enabled. What should i do to get access to the large instance? I don't want to set up the domain yet, i want access from an amazon url. 2ND EDIT: all fixed. Charles pointed that maybe Security Groups was not properly set up for the instance. He was right. Just added HTTP service to the rules and all works good.

  Read the article

• SQL Server architecture - they want to move my database to new instance...Why?

  - by O'MALLEY

  Our current production database environment contains about 10 similarily managed databases. Our agency has just purchased and is installing new blade chasses and wants to move my database to a new instance (leaving the other 9 on another). This decision is being driven by one of our IT staff, not a DBA. I am a project manager, not a DBA but I know enough to not necesarrily have a good feeling about this decision and I am urging our IT department to make a sound decision based on what is best for the database. Our IT department has stated that it is not good to have all our eggs in one basket, and has also stated that my database contains "regulatory data" so it should be on its own instance. A couple of truths: - None of the databases on the current instance are OLTP databases nor are any of them data warehouses - My database currently has joins/views to a couple of the other databases in the production environment So my questions are as follows: Am I wrong to disregard a statement about eggs in baskets? (hello, this is why we have maintenance plans/disaster recovery plans). I'll mention that other databases also have regulatory data too. What types of questions do I need to ask to determine if this is a sound decicion? (A DBA friend mentioned that if the service level agreement of said database does not radically differ from the others then why do they want to do this?) I have done some research on linked servers. What arguments should I bring forth about the fact that I have views setup that rely on data from other DBs currently?

  Read the article

• Debian, How to convert filesystem from ISO-8859-1 into UTF-8?

  - by Johan

  I have a old pc that is running Debian stable, that is in need of a upgrade. The problem is that it is using latin1 (ISO-8859-1) for everything, and since the rest of the world has moved to UTF-8 I plan to convert this computer as well. And for this question I will focus in on the files that are served with Samba, and some has some latin1 characters in the filenames (like åäö). Now my plan is to move all data of this old computer onto and a brand new one that is running Debian stable (but with UTF-8). Does anybody have a good idea? Thanks Johan Note: later I plan to use iconv to convert the content of some files with something like this: iconv --from-code=ISO-8859-1 --to-code=UTF-8 iso.txt > utf.txt However I don't know of a good way to convert the filesystem it self. Note: Normally I usaly just scp from one computer to the next, but then I end up with latin1 characters in the utf-8 filesystem... Update: Did a small test round with a hand full of files (with funny chars) in the filenames, and that seemed like it could work. convmv -r -f ISO-8859-1 -t UTF-8 * So it was only to execute with the --notest convmv -r -f ISO-8859-1 -t UTF-8 --notest * Nothing more to it.

  Read the article

• Different approaches to share files over local network & playlists "collaboration"

  - by exTyn

  I know, that I can use Google to find methods to share files over local network [1]. But, I have never shared files over local network, and I want to do this in a good, professional way. Also, this could be a good community wiki, I think. Well, what I am asking for, is: what are pros and cons of different methods to sharing files ofver local network? In my case, I need to share files between Linux & Win 7, and I want it to be secure (= without access for anyone else but me & people in my room). Another question (connected with above topic) is about playing music over the local network. Let's say, I live with 2 other guys in a room, one of us have speakers and we want to collaborate in creating playlists (e.g. everyone is choosing 3 songs to be played). Is it possible? How to do this? I am asking this question on SuperUser, because it (question) is connected with hardware & software (network, connecting computers, software for managing playlists in network etc.). I think it is most accurate place for such question (I have considered SO and SF). [1] And I have already done this! But, I do not have an experience in this field (sharing files over local network), do I am asking about pros and cons.

  Read the article

< Previous Page | 280 281 282 283 284 285 286 287 288 289 290 291  | Next Page >