Search Results

Search found 33971 results on 1359 pages for 'ask and learn'.

Page 285/1359 | < Previous Page | 281 282 283 284 285 286 287 288 289 290 291 292  | Next Page >

  • Expiry time in notify-send notifications

    - by gsingh2011
    On my HP computer running Ubuntu 12.04, the brightness and volume increments were much higher than I wanted. On top of that, the notification for the volume was just plain wrong (0% sound did not correspond to 0 on the progress bar). So I decided to override these options with my own commands. I used CompizConfig Settings Manager to add custom commands to the brightness and volume keys (this couldn't be done in the regular settings because these keys were handled by the BIOS, unlike normal function keys). I used xbacklight to control the brightness and amixer to control the volume. The problem is that the nice notify-send notifications don't show up when I manually set the brightness/volume, so now I have to do that myself too. However, there are two problems with notify-send: The expire time option doesn't work You have to wait until a notification is finished before the next one comes up Before I overrided the brightness/volume keys, the system was able to send notifications without these two restrictions. Notifications disappeared within 3 seconds (instead of the default 10), and if I double tapped the volume or brightness button, the progress bar would immediately change to the new brightness (instead of showing the old progress bar for 10 seconds and then showing the new one). Since the system was able to do it, I was wondering how I can achieve the same type of notifications?

    Read the article

  • Why do I have man pages of commands that don't exist?

    - by Robert Vila
    What is panel-test-applets for?? I don't know. But if I want to know I type: $ whatis panel-test-applets The answer is: panel-test-applets (1) - display installed applets I have the man page too, and I can read it: $ man panel-test-applets But there is no program with that name. Maybe the command is not very useful, but is its man page more useful? Does someone know how to install that program or what is its man page for when you cannot execute the program? I can't even execute the command: $ panel-test-applets nor $ panel-test-applets --help which is the only thing its man page talks about!!

    Read the article

  • Nagios suddenly stops working

    - by pankaj sharma
    I have configure passive checks on one my host system for this i am using nsca. it was running fine. suddenly host is showing down on the monitoring. but host was fine and running when i check the logs on the host showing [1347941895] Warning: Attempting to execute the command "/submit_check_result host.example.com 'Current Load' OK 'OK - load average: 0.69, 0.53, 0.42'" resulted in a return code of 127. Make sure the script or binary you are trying to execute actually exists... i restarted nagios services many times but still it is showing the same error. can anyone help me regarding this. thanks in advance..

    Read the article

  • How can I force fullscreen on my right screen?

    - by Boris
    I have 2 screens: 17" on left and 22" screen on right side. When I watch a movie with VLC and want to watch on full-screen on my 22" screen (the right one), I move my VLC window in right screen and then click on full-screen = no problem. BUT when using Firefox and watching streaming video, watching on full-screen is always on 17" screen (left one). How can I force full-screen to be on my 22" screen (right one) ?

    Read the article

  • using egrep to find missing @ in log

    - by jols
    I am using the following command to find log entries that are the result of a log in to the email server: egrep '_login[^ ]' /var/log/exim_mainlog That works fine to find entries that contain content like this: P=esmtpa A=courier_login:[email protected] S=1573 id=f1cd08396,... But what I need to do is to change my grep statement, so that it finds single word logins that do not use the @ sign, like so: P=esmtpa A=courier_login:name S=1573 id=f1cd08396,... Where the log in before was "[email protected]", but in the second log entry, the log in used was only "name". Is this possible using grep or egrep, perhaps in some kind of a compound statement? Thanks much.

    Read the article

  • GUVCVIEW errors

    - by Brian Snapp
    I had GUVCVIEW working once before. it suddenly quit working. This is the error I receive........ bt_audio_service_open: connect() failed: Connection refused (111) bt_audio_service_open: connect() failed: Connection refused (111) bt_audio_service_open: connect() failed: Connection refused (111) bt_audio_service_open: connect() failed: Connection refused (111) video device: /dev/video0 /dev/video0 - device 1 Init. Intergrated Webcam (location: usb-0000:00:1a.7-2) { pixelformat = 'YUYV', description = 'YUV 4:2:2 (YUYV)' } { discrete: width = 640, height = 480 } Time interval between frame: 1/30, 1/20, 1/15, 1/10, 1/5, { discrete: width = 352, height = 288 } Time interval between frame: 1/30, 1/20, 1/15, 1/10, 1/5, { discrete: width = 320, height = 240 } Time interval between frame: 1/30, 1/20, 1/15, 1/10, 1/5, { discrete: width = 176, height = 144 } Time interval between frame: 1/30, 1/20, 1/15, 1/10, 1/5, { discrete: width = 160, height = 120 } Time interval between frame: 1/30, 1/20, 1/15, 1/10, 1/5, { discrete: width = 1024, height = 768 } Time interval between frame: 1/9, 1/5, { discrete: width = 1280, height = 1024 } Time interval between frame: 1/9, 1/5, checking format: 1196444237 Format unavailable: 1196444237. Init v4L2 failed !! Init video returned -2 trying minimum setup ... video device: /dev/video0 /dev/video0 - device 1 Init. Intergrated Webcam (location: usb-0000:00:1a.7-2) { pixelformat = 'YUYV', description = 'YUV 4:2:2 (YUYV)' } { discrete: width = 640, height = 480 } Time interval between frame: 1/30, 1/20, 1/15, 1/10, 1/5, { discrete: width = 352, height = 288 } Time interval between frame: 1/30, 1/20, 1/15, 1/10, 1/5, { discrete: width = 320, height = 240 } Time interval between frame: 1/30, 1/20, 1/15, 1/10, 1/5, { discrete: width = 176, height = 144 } Time interval between frame: 1/30, 1/20, 1/15, 1/10, 1/5, { discrete: width = 160, height = 120 } Time interval between frame: 1/30, 1/20, 1/15, 1/10, 1/5, { discrete: width = 1024, height = 768 } Time interval between frame: 1/9, 1/5, { discrete: width = 1280, height = 1024 } Time interval between frame: 1/9, 1/5, checking format: 1448695129 Requested Format unavailable: get width 640 height 480 vid:0c45 pid:6410 driver:uvcvideo (guvcview:4079): Gtk-CRITICAL **: gtk_hscale_new_with_range: assertion `min < max' failed (guvcview:4079): Gtk-CRITICAL **: gtk_scale_set_draw_value: assertion `GTK_IS_SCALE (scale)' failed Segmentation fault I suppose the problem lies in the fact, that I cannot locate a configuration file to edit. Any help in where this file may lie? I have tried searching for any/everything related to guvcview, and have had zero success. Thank you for taking the time to read this, and hopefully providing a solution..

    Read the article

  • DVDs and CDs not recognized

    - by Larry Doyle
    I have Ubuntu 12.04 LTS installed on my computer (Sony Vaio VGN-NS205N). It reads some CDs and DVDs just fine, but many others it will not recognize at all, or will only recognize after opening and closing the CD tray many times. It just shows the cd/dvd drive as being empty and won't show that anything is on there at all. I have a few DVDs (from the same publisher) that work every time. This comes up most often when trying to show my kid Bob the Builder, etc. Some data CDs I would like to work with also have the same issue. It's not a hardware or defective disc problem, since all these will play in Windows on the same machine. It's just really annoying to have to switch operating systems to play videos or get data off discs. All the searches I have done people recommend installing medibuntu and other repositories. I have and they are all up to date. No change. Any help that works would be greatly appreciated.

    Read the article

  • How to encrypt php folder under /var/www?

    - by sirchaos
    I need to encrypt the folder /var/www/test. The folder contains PHP files. The goal it to prevent any user to read the php content AND if the HD is mounted on another computer, the /var/www/test should be encrypted AND if computer booted up without any user logged I would like anyone to be able to access data in /var/www/tests. What is the correct approach for this? I've tried "ecryptfs-setup-private" as advised in How to encrypt /var/www? yet it didn't work for me. I've might missed something - I've tested the folders while booting with ubuntu 12.04 installation disk and mounted the drive, than I was able to access /var/www/test content.. yet this is what I want to prevent. The gnome-encfs isn't the way to go since its decryption happens when users logs on to the system & I would like the system to be working after power failure etc' without any one logged in. Please advice.

    Read the article

  • Remote Desktop (Vino-Server) connects but display doesn't work?

    - by kmassada
    Ubuntu comes default with vino-server, I can remote into my machine, and connect to it, however, the display inside my remote client, is a mirror of my own desktop. I tried using one monitor, thinking that's what is the issue but still won't work. (vino-server:3608): EggSMClient-CRITICAL **: egg_sm_client_set_mode: assertion `global_client == NULL || global_client_mode == EGG_SM_CLIENT_MODE_DISABLED' failed 25/07/2012 12:23:58 PM Autoprobing TCP port in (all) network interface 25/07/2012 12:23:58 PM Listening IPv6://[::]:5900 25/07/2012 12:23:58 PM Listening IPv4://0.0.0.0:5900 25/07/2012 12:23:58 PM Autoprobing selected port 5900 25/07/2012 12:23:58 PM Advertising security type: 'TLS' (18) 25/07/2012 12:23:58 PM Re-binding socket to listen for VNC connections on TCP port 5900 in (all) interface 25/07/2012 12:23:58 PM Listening IPv6://[::]:5900 25/07/2012 12:23:58 PM Listening IPv4://0.0.0.0:5900 25/07/2012 12:23:58 PM Clearing securityTypes 25/07/2012 12:23:58 PM Advertising security type: 'TLS' (18) 25/07/2012 12:23:58 PM Clearing securityTypes 25/07/2012 12:23:58 PM Advertising security type: 'TLS' (18) 25/07/2012 12:23:58 PM Advertising authentication type: 'No Authentication' (1) 25/07/2012 12:23:58 PM Re-binding socket to listen for VNC connections on TCP port 5900 in (all) interface 25/07/2012 12:23:58 PM Listening IPv6://[::]:5900 25/07/2012 12:23:58 PM Listening IPv4://0.0.0.0:5900 25/07/2012 12:23:58 PM Clearing securityTypes 25/07/2012 12:23:58 PM Clearing authTypes 25/07/2012 12:23:58 PM Advertising security type: 'TLS' (18) 25/07/2012 12:23:58 PM Advertising authentication type: 'VNC Authentication' (2) 25/07/2012 12:23:58 PM Clearing securityTypes 25/07/2012 12:23:58 PM Clearing authTypes 25/07/2012 12:23:58 PM Advertising security type: 'TLS' (18) 25/07/2012 12:23:58 PM Advertising authentication type: 'VNC Authentication' (2) 25/07/2012 12:23:58 PM Advertising security type: 'VNC Authentication' (2) (vino-server:3608): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent. (vino-server:3608): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent. 25/07/2012 12:24:16 PM [IPv4] Got connection from client static-XXXX.bltmmd.fios.verizon.net 25/07/2012 12:24:16 PM other clients: 25/07/2012 12:24:29 PM Client Protocol Version 3.7 25/07/2012 12:24:29 PM Advertising security type 18 25/07/2012 12:24:29 PM Advertising security type 2 25/07/2012 12:24:30 PM Client returned security type 18 25/07/2012 12:24:30 PM Advertising authentication type 2 25/07/2012 12:24:30 PM Client returned authentication type 2 25/07/2012 12:24:37 PM rfbProcessClientNormalMessage: ignoring unknown encoding type -258 25/07/2012 12:24:37 PM Enabling NewFBSize protocol extension for client static-XXXX.bltmmd.fios.verizon.net 25/07/2012 12:24:37 PM rfbProcessClientNormalMessage: ignoring unknown encoding type 1464686185 25/07/2012 12:24:37 PM rfbProcessClientNormalMessage: ignoring unknown encoding type -259 25/07/2012 12:24:37 PM rfbProcessClientNormalMessage: ignoring unknown encoding type -257 (vino-server:3608): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent. 25/07/2012 12:24:55 PM Client static-XXXX.bltmmd.fios.verizon.net gone 25/07/2012 12:24:55 PM Statistics: 25/07/2012 12:24:55 PM key events received 0, pointer events 80 25/07/2012 12:24:55 PM framebuffer updates 43, rectangles 152, bytes 292401 25/07/2012 12:24:55 PM tight rectangles 152, bytes 292401 25/07/2012 12:24:55 PM raw bytes equivalent 11621332, compression ratio 39.744502 25/07/2012 12:25:21 PM [IPv4] Got connection from client static-XXXX.bltmmd.fios.verizon.net 25/07/2012 12:25:21 PM other clients: 25/07/2012 12:25:28 PM Client Protocol Version 3.7 25/07/2012 12:25:28 PM Advertising security type 18 25/07/2012 12:25:28 PM Advertising security type 2 25/07/2012 12:25:28 PM Client returned security type 18 25/07/2012 12:25:29 PM Advertising authentication type 2 25/07/2012 12:25:29 PM Client returned authentication type 2 25/07/2012 12:25:37 PM rfbProcessClientNormalMessage: ignoring unknown encoding type -258 25/07/2012 12:25:37 PM Enabling NewFBSize protocol extension for client static-XXXX.bltmmd.fios.verizon.net 25/07/2012 12:25:37 PM rfbProcessClientNormalMessage: ignoring unknown encoding type 1464686185 25/07/2012 12:25:37 PM rfbProcessClientNormalMessage: ignoring unknown encoding type -259 25/07/2012 12:25:37 PM rfbProcessClientNormalMessage: ignoring unknown encoding type -257 (vino-server:3608): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent. 25/07/2012 12:25:47 PM Client static-XXXX.bltmmd.fios.verizon.net gone 25/07/2012 12:25:47 PM Statistics: 25/07/2012 12:25:47 PM key events received 0, pointer events 7283 25/07/2012 12:25:47 PM framebuffer updates 27, rectangles 82, bytes 113354 25/07/2012 12:25:47 PM tight rectangles 82, bytes 113354 25/07/2012 12:25:47 PM raw bytes equivalent 5831432, compression ratio 51.444431 couple of things I notice, the following error occurs over and over again. the menu error seems to be caused by ubuntu, similar problems occur http://trac.wxwidgets.org/ticket/14292, (vino-server:3608): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent. the second one also seem to be a display related issue, can't seem to figure out a solution. I really rather try to fix this issue than have to use the other vnc clients most suggest. (vino-server:3608): EggSMClient-CRITICAL **: egg_sm_client_set_mode: assertion `global_client == NULL || global_client_mode == EGG_SM_CLIENT_MODE_DISABLED' failed

    Read the article

  • Problems creating a debdiff

    - by Chris Wilson
    I'm following this guide to create a debdiff for a package I'm patching. Everything goes fine until step number 8 and I attempt to create the debdiff after committing the changes. The package in question is Zim, pulled form Launchpad using bzr branch lp:zim and according to this guide I should execute the following command to create the debdiff: debdiff zim_0.49.dsc zim_0.49ubuntu1.dsc > zim_0.49ubuntu1.debdiff however, when I actually try to execute this command, I get the following error: debdiff: fatal error at line 314: Can't read file: zim_0.49.dsc Upon inspection of the directory in which the files created from debuild -S (step 6) are deposited, I find zim_0.49ubuntu1_source.changes zim_0.49ubuntu1.dsc zim_0.49ubuntu1.tar.gz zim_0.49ubuntu1_source.build but no sign of zim_0.49.dsc. I could probably create one by debuilding the package as soon as I check out the code, before starting work, but that would add an extraneous entry in the changelog. Is there a step missing from the guide that creates zim_0.49.dsc or is the file itself missing from the source?

    Read the article

  • Sound stopped working

    - by Brian West
    I ran through the troubleshooting at https://help.ubuntu.com/community/SoundTroubleshooting It did not play the test sound, and it also does not play sounds during speaker-test. It does play sounds when I adjust my volume on my computer (using pommed). It worked just the other day, but this is the first time I've tested it since last night, when I put it to pm-suspend-hybrid and it half-woke up (the backlight came on, but it didn't fully wake up), then went back, then half-woke again, but was frozen like that. I had to do a manual reboot of the machine when that happened. Now my sound doesn't work, except for adjusting the volume (where the little "beep" sound plays). During the troubleshooting, it recognized my sound card, the sound modules, and the sound card's installation. I've tried removing ~/.pulse, but to no avail. Also, if it's any help, pulseaudio is running, but pulseaudio --check returns nothing, which the manpage suggests indicates an error. Edit: I should probably clarify that the wake up from the suspend-hybrid was not provoked in any way. I was laying in bed when I noticed my room was brighter suddenly, so I got up to check on it.

    Read the article

  • Enigmail - how to encrypt only part of the message?

    - by Lukasz Zaroda
    When I confirmed my OpenPGP key on launchpad I got a mail from them, that was only partially encrypted with my key (only few paragraphs inside the message). Is it possible to encrypt only chosen part of the message with Enigmail? Or what would be the easiest way to accomplish it? Added #1: I found a pretty convenient way for producing ASCII armoured encrypted messages by using Nautilus interface (useful for ones that for some reason doesn't like to work with terminal). You need to install Nautilus-Actions Configuration Tool, and add there a script with a name eg. "Encrypt in ASCII" and parameters: path: gpg parameters: --batch -sear %x %f The trick is that now you can create file, with extension that would be name of your recipient, you can then fill it with your message, right click it in Nautilus, choose "Encrypt in ASCII", and you will have encrypted ascii file which content you can (probably) just copy to your message. But if anybody knows more convenient solution please share it. Added #1B: In the above case if you care more about security of your messages, It's worth to turning off invisible backup files that gedit creates every time, you create new document, or just remember to delete them.

    Read the article

  • Reboot failure after upgrade from 8.04 LTS to 10.04 LTS

    - by Alan Fietz
    I bought our computer from Freegeeks with Ubuntu 8.04 installed. I upgraded from Ubuntu 8.04 to 10.04 on Thursday November 10. I have an ASUS P4P800SE with dual Intel P4@3GHZ. Installation messages were: - Error loading Nautilus config info - Replaced customied /etc/login.defs - Replaced customized /etc/dhcp3/dhclient.conf - 189 packages removed - WARNING: Failed to read mirror file When I rebooted, the usual ASUS screen appeared, then "Loading GRUB" then "starting Up..." then "starting Up..." again then a blank screen (the moniter went dormant). I rebooted, started GRUB and selected: version 10.04.3 LTS kernel 2.6.32-35 generic I got the same results. I rebooted, started GRUB and selected: kernel 2.6.24-29 generic Here's what was displayed: udevd [875]: error getting socket: Invalid argument libudev:udev_monitor_new_from_netlink: error getting socket: Invalid argument Segmentation fault **Gave up waiting for root device** Common problems - Boot args (cat/proc/cmdline) - Check root delay - check root - Missing modules (cat/pro/modules; **Alert! /dev/disk/by_vvid/c59c6361 etc... does not exist. Dropping to a shell.** Then Busybox v1.13.3 started with the following prompt (?) (initramfs) _ But my typing did not appear on the screen. It appears the hard drive cannot be found. Any suggestion on how to remedy this? Thank you.

    Read the article

  • Can't install drivers for Epson wp-4530

    - by Rick
    It looks like it's installing ok then I get an error: (Reading database ... 177199 files and directories currently installed.) Unpacking epson-inkjet-printer-escpr:i386 (from .../epson-inkjet-printer-escpr_1.3.0-1lsb3.2_i386.deb) ... dpkg: dependency problems prevent configuration of epson-inkjet-printer-escpr:i386: epson-inkjet-printer-escpr:i386 depends on lsb (>= 3.2). dpkg: error processing epson-inkjet-printer-escpr:i386 (--install): dependency problems - leaving unconfigured Errors were encountered while processing: epson-inkjet-printer-escpr:i386 Can anyone help me with this? Tried install under linux mint 14 and ubuntu 12.04 same problem. Tried installing using cups and Software center. Driver is from http://download.ebz.epson.net/dsc/search/01/search/?OSC=LX which is only driver site I can find for this printer Please help

    Read the article

  • Broadcom WiFi drivers conflict

    - by james
    $ sudo dpkg -i wireless-bcm43142-dkms-6.20.55.19_amd64.deb dpkg: acerca de wireless-bcm43142-dkms-6.20.55.19_amd64.deb que contiene wireless-bcm43142-oneiric-dkms: wireless-bcm43142-oneiric-dkms entra en conflicto con bcmwl-kernel-source bcmwl-kernel-source (versión 6.20.155.1+bdcom-0ubuntu0.0.2) está presente y instalado. dpkg: error al procesar wireless-bcm43142-dkms-6.20.55.19_amd64.deb (--install): paquetes en conflicto - no se instalará wireless-bcm43142-oneiric-dkms Se encontraron errores al procesar: wireless-bcm43142-dkms-6.20.55.19_amd64.deb Help me find a solution to install this .deb package.

    Read the article

  • EVOLUTION: No such Calendar

    - by Dennis
    I am using a google calendar with evolution for quite a while now. I was never having any troubles. Just recently, I suppose just after an update, whenever I want to create a new event in evolution (for the just mentioned google calendar) I get the err message "No such calendar". When I dismiss changes an re-open evolution the entry has been added anyway. This is somewhat annoying. I googled, but haven't found anything yet which suggests that it not problem many people have!? Looking for help, maybe someone here knows an answer! I appreciate any suggestion! Cheers, Dennis

    Read the article

  • Blank desktop when logging in via xrdp

    - by nitefrog
    I am trying to access Ubuntu 11.10 using Remote Desktop from a Win 7 machine. I installed xrdp. I launch the Windows remote desktop client and login in. I then get prompted for the user name and password. It then logs in, but all I see is the background, no menus, nothing. I have to kill remote desktop by closing it. Even if I right click , nothing. Any ideas??? The only reason I even went down the RDP road was that VNC would not work either, even after I enabled desktop sharing. I am in a bind as I need to connect to Ubuntu via Windows. In version 8 Ubuntu this was not an issue and it just worked.

    Read the article

  • How to retrieve old facebook/XMPP messages as well as new with kopete?

    - by searchfgold6789
    I have been considering using Kopete to use Facebook chat instead of logging on to Facebook with a web browser. That way, I can integrate messages with my KDE desktop better. The problem is, when I open Kopete, I am unable to see messages that I recieved in Facebook while Kopete was not opened. I can only see messages that I sent or received when Kopete was open. The same thing happens in Outlook.com (which is a website that connects to Facebook), Pidgin software, and other instant messaging tools. So my question is, how can I receive these messages with a desktop chat application in KDE, such as Kopete? Facebook has made their API publicly available to developers, and KDE has its own Facebook integration plugin. So it would seem achievable.

    Read the article

  • Crashes while playing Mp3 songs

    - by sid
    I have Downloaded and Installed Ubuntu last month while downloading codecs for playing Music and Video Formats my Laptop (Dell XPS) crashed. later i again started the system now the problems i face are 1) After Signing in as User/Admin the wallpaper loads while all other windows disappear no UI (task bar and dock) is displayed even after say 30 min. 2) I uninstalled and reinstalled Ubnutu hence there were no problems but when i play Music files the Laptop crashes and the same sequence as above follows this has happened for last 6 times. 3) Whenever the UI disaapears after logging in the Hard Disk starts to heat up and there is considerable increase in power usage of the system. where in the power drain is notable. Please suggest any changes or rectify the issue. Regards Sid

    Read the article

  • How can I install new locale to Ubuntu?

    - by UniMouS
    $ locale -a get output like this: C C.UTF-8 en_AG en_AG.utf8 en_AU.utf8 en_BW.utf8 en_CA.utf8 en_DK.utf8 en_GB.utf8 en_HK.utf8 en_IE.utf8 en_IN en_IN.utf8 en_NG en_NG.utf8 en_NZ.utf8 en_PH.utf8 en_SG.utf8 en_US.utf8 en_ZA.utf8 en_ZM en_ZM.utf8 en_ZW.utf8 POSIX zh_CN.utf8 zh_SG.utf8 How can I install a new locale, for example en_US.ISO-8859-1. After this operation, I wish en_us.ISO-8859-1 could be listed in the locale -a list.

    Read the article

  • Auto-mount filesystems on boot fails (12.10)

    - by Joshua Pruitt
    I have a Compaq HP 8200 slim desktop running 12.10 with encrypted partitions (set up with the text-based installer). Everything's working fine, except... When I boot the computer, my /boot and /boot/efi directories refuse to mount automatically. I'm dropped to the root console, where I must enter 'mountall -v', and everything then continues on just fine. This was happening under 12.04. I've recently upgraded to 12.10, and the problem persists. Except now, in addition to /boot and /boot/efi not mounting, roughly 50% of the time /var will not be auto-mounted as well (and again, 'mountall -v' fixes allows me to boot and move on). I'm puzzled about this one. Running 'fsck' doesn't seem to do anything (the filesystems aren't damaged anyway). What can I try to solve this issue? Here's my /etc/fstab: http://paste.ubuntu.com/1338508/ Thanks in advance!!! Addendum: I have tried changing the entries in fstab from UUIDs to the actual devices, to no avail.

    Read the article

  • Installing a minimal GUI + VNC

    - by Malachi
    I have a fresh install of Ubuntu 10.04 Server on my VPS and would like to install a minimal GUI onto this and allow VNC access to. Please could someone outline the steps required to set this up so that I can VNC to my machine under a newly created user account. Create the user: useradd -m -s /bin/bash -p password -d /home/usera userA chown userA:users /home/usera Install the GUI sudo apt-get install --no-install-recommends ubuntu-desktop Setup VNC ?

    Read the article

  • How to uninstall Avira antivirus from Ubuntu 14.04?

    - by Tom
    I installed Avira on my Ubuntu now. These are the commands I used to install Avira: wget http://dlpe.antivir.com/package/wks_avira/unix/en/pers/antivir_workstation-pers.tar.gz tar xvzf antivir_workstation-pers.tar.gz sudo ./antivir-workstation-pers-3.1.3.5-0/install After installation I tried to open Avira by searching it in the computer, but its not found anywhere. Because of this I want to uninstall it. How to uninstall it ?

    Read the article

  • Mount problem on 12.10

    - by Malcolm Osborne
    I've just done an online upgrade from 12.04 to 12.10 - seemed to have gone well, but now I cannot access other drives (partitions) on my PC, also flash drives. Get error Unable to mount location - Adding read ACL for uid 1000 tomedia/malcolm failed':Operation not supported. Content of mount -l: /dev/sdb8 on / type ext2 (rw,errors=remount-ro) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) udev on /dev type devtmpfs (rw,mode=0755) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755) none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880) none on /run/shm type tmpfs (rw,nosuid,nodev) none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755) binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev) gvfsd-fuse on /run/user/malcolm/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=malcolm)

    Read the article

  • can not install gimp

    - by user71700
    I tried to install Gimp but I get an error that there are unmet dependencies. How can I handle that. I am running UBUNTU 12.04 in 64 bit. This is the message I get: The following packages have unmet dependencies: gimp: Depends: python-gtk2 (= 2.8.0) but 2.24.0-3 is to be installed Depends: libc6 (= 2.15) but 2.15-0ubuntu10 is to be installed Depends: libfontconfig1 (= 2.8.0) but 2.8.0-3ubuntu9 is to be installed Depends: libgdk-pixbuf2.0-0 (= 2.22.0) but 2.26.1-1 is to be installed Depends: libglib2.0-0 (= 2.31.2) but 2.32.3-0ubuntu1 is to be installed Depends: libgtk2.0-0 (= 2.24.0) but 2.24.10-0ubuntu6 is to be installed Depends: libjpeg8 (= 8c) but 8c-2ubuntu7 is to be installed Depends: librsvg2-2 (= 2.14.4) but 2.36.1-0ubuntu1 is to be installed Depends: zlib1g (= 1:1.1.4) but 1:1.2.3.4.dfsg-3ubuntu4 is to be installed Depends: python (= 2.7.1-0ubuntu2) but 2.7.3-0ubuntu2 is to be installed

    Read the article

< Previous Page | 281 282 283 284 285 286 287 288 289 290 291 292  | Next Page >