Search Results

Search found 61276 results on 2452 pages for 'windows authentication'.

Page 285/2452 | < Previous Page | 281 282 283 284 285 286 287 288 289 290 291 292  | Next Page >

• Suggestions for Troubleshooting WIndows 7 lockups

  - by Craig L

  I've got a Dell Latitude E6500 that was working fine under Vista x64. I got one of the new Seagate 500GB Hybrid SSD/HD 2.5 drives and thought.. hmm.. let's try Win 7 x64 on it. Bottom line: It works great for hours and then it will hard lock. I don't mean BSOD (or whatever the Win7 equivalent is). I mean my screen is displaying a static image (if there is a clock displayed, it will be frozen at the time the lockup occurred) and the mouse and keyboard do not work. Control-Alt-Delete will not work. I have to hold down the power button to reboot. The event log records NOTHING at the time the lockup occurs. Obviously something is happening to the system to cause the lockup, but the default Windows 7 x64 doesn't log it. How can I log the things Windows doesn't normally log in Event Viewer ?

  Read the article

• No HDMI audio - Windows 8 - ASUS H81M-PLUS

  - by Paul Wright

  I have an issue with HDMI audio on Windows 8 using an ASUS H81M-PLUS motherboard (without an external GFX card). There are many forum posts advising you to go into playback devices and setting HDMI to be default - I have done this. To eliminate what works and what doesn't work: I have not been able to get sound from my HDTV using HDMI. I have used this HDMI cable with my PS3, so this cable should be fine. I am able to use the HDMI cable in extended mode, so that I have two monitors (including the TV), just no audio. This HDMI cable goes straight from the motherboard to the TV. Below I have included 'Device manager', and 'Playback Devices' (Sound). Device Manager Playback Devices, showing disabled and disconnected devices I am at a loss. I have uninstalled all drivers, and then rebooted and made windows look for the correct ones, made sure the HDMI device was default. Thanks, Paul

  Read the article

• Selecting primary Internet connection in Windows XP

  - by Mariusz

  There is a computer that has access to the Internet both via the local network and by a GSM modem. As far as I know, when both connections are active, the modem connection is the primary one and all data is transmitted by the modem. Because of the fact that the slow modem connection is supposed to be used as a backup connection, I want Windows to use it only when the connection via LAN is unavailable. At the same time I want the GSM modem connection to be active constantly. Is it possible to make Windows not use modem connection when there is a working LAN Internet connection? Thanks for your help in advance, Mariusz.

  Read the article

• C# Toolbox: Debug-able, Self-Installable Windows Service Template Redux

  - by James Michael Hare

  I had written a pair of posts before about creating a debug-able and self-installing windows service template in C#.  This is a template I began creating to ease creating windows services and to take some of the mundane tasks out of the coding effort.  The original posts were here: C# Windows Services (1 of 2) - Debug-able Windows Services C# Windows Services (2 of 2) - Self-Installing Windows Services But at the time, though I gave the code samples I didn't have a downloadable for of the template on the blog.  After getting many requests for the actual source, I zipped it up and am posting it with this blog entry.  Click on the link below to download the archive.  The password on the archive is, imaginatively enough, password.  Hope you enjoy and please feel free to comment and suggest changes! Debug-able, Self-Installing Windows Service Template download Enjoy! Tweet Technorati Tags: C#,Windows Service,Toolbox

  Read the article

• Partition table correpted in windows 7 machine as simple dynamic partition

  - by raki

  I have Windows 7 installed in my system. When I originally partitioned it I made 3 partitions and 16 gb space as unallocated. Later I tried to create a partition using this free space using diskmanagement tool. It shows free space as unusabe space and the only one option available is to make it as a simple partition. Unfortunately I made it as simple partition and all my partitions converted to simple dynamic partition. Now after reboot the OS is not loading. I tried to reinstall the OS by formatting the C drive, but it doesn't work. Now I can't load the OS properly. How can I install Windows 7 on my system without losing my data on the other two drives?

  Read the article

• How to convert Windows filenames (from a checksums.md5) to *nix notation so I can use it on my shell with md5sum?

  - by Somebody still uses you MS-DOS

  I have some checksums.md5 verification files from an ntfs external drive, but using windows notation: \ instead of /, spaces between file names (not escaped), reserved shell characters (like (, &, ', to name a few). The checksums.md5 has a bunch of checksums and filenames: ;Created by program ;2010 f12f75c1f2d1a658dc32ca6ef9ef3ffc *My Windows & Files (2010)\[bak]\testing.wmv 53445e1a0821b790872e60bd7a166887 *My Windows Files' 2 (2012)\[bak]\testing.wmv 53445e1a0821b790872e60bd7a166887 *My Windows Files ˜nicóde (2012)\[bak]\testing.wmv ;Finished I want to use this checksums.md5 to verify the files that I've copied to my machine: but I'm on a Linux, so I need to convert the names inside checksums.md5 from Windows to Linux to use the md5sum utility from the shell. The first line in my example would become: f12f75c1f2d1a658dc32ca6ef9ef3ffc My\ Windows\ \&\ Files\ \(2010\)/\[bak\]/testing.wmv Is there some application for this (converting a file listing, from windows cmd notation, to linux shell notation) or will I need to create a bash script using sed that just "replaces" what is "wrong" with the filenames?

  Read the article

• How to install seleniumHQ for Python on Windows?

  - by Katie

  I would like to know how to install SeleniumHQ (http://seleniumhq.org/download/) on Windows XP/Vista/7? On Ubuntu/Debian system you need to just type those commands: $ sudo apt-get install python-pip $ sudo pip install selenium $ sudo apt-get install python-pip xvfb xserver-xephyr $ sudo pip install selenium and then I can do this: #!/usr/bin/env python from selenium import selenium # ... but how about Windows? Thanks for any help (I know where to find Selenium doc but still - would anybody be so kind to give me some steps: I mean, download this, do that ...) THANKS:)

  Read the article

• Why can't windows see mmcblk0p3? [closed]

  - by jacknad

  The partition is created on the embedded linux target like this # n - new # p - partition # 3 - partition 3 # 66 - starting cylinder # <blank> - maximum size for the ending cylinder # t - set file system type # 3 - partition 3 # c - set to windows vfat # w - write partition table and exit echo -e "n\np\n3\n66\n\nt\n3\nc\nw" | fdisk /dev/mmcblk0 The file system is then formatted on the embedded linux target as MS-DOS like this # -n volume-name # -F FAT-size mkfs.vfat -n DB -F 32 /dev/mmcblk0p3 A linux host can mount and access files in mmcblk0p3 without issue. Why can't windows? Edit: Although the default number of FATS is 2 I tried adding -f 2 [number-of-FATs] since this is actually being done by busybox on an embedded platform but this didn't help. I understand the Linux MS-DOS file system does not support more than 2 FATs but there are only 2 on this target (the boot is also FAT which is visible), along with and EXT3 (on p2) for the root file system.

  Read the article

• Deploying an application on a windows domain

  - by ALOToverflow

  I'm looking for different ways to deploy, execute and uninstall an application on all machines of a Windows domain. I've did some research on Group Policy Object (GPO) but I'm still looking for other ideas. As I said, I need to deploy the application, run it without the user having to click anything and letting him to control over the machine. Once it's finished running I need to uninstall it and never run it again. Can such things be done with a GPO? Are there any other possibilites on a Windows domain? Thank you

  Read the article

• Windows file sharing connects over WiFi instead of LAN

  - by zacaj

  I have a laptop and a desktop computer, and I need to sync lots of files to the laptop and back whenever I go on a trip, etc. I've got a LAN cable connected into an extra port on the desktop that I plug into the laptop so I can get gigabit file transfers instead of wireless G. They connect fine. If I do an FTP transfer, for instance, using the LAN IP addresses, it goes at ~40MB/s, as it should. However when I copy files using explorer and native windows file sharing it detects the other computer by name, not IP (eg \\DESKTOP-PC\ instead of \\192.168.0.100\) and always connects to it by its wireless IP address instead of the faster LAN address. Both computers are running Windows 7. I have tried editing the priorities of the adapters in Advanced Settings and putting the LAN adapters above the wifi ones, but this didn't have any effect

  Read the article

• Windows Server 2003 not automatically assigning drive letter to external drives

  - by Chris

  My newly rebuilt Windows Server 2003 doesn't automatically assign drive letters to external usb devices. I have to manually open the Disk Management Console and assign it a drive letter every time. It does this with two different drives in all USB ports. I have been doing some reading and I don't have any network drives, I have also already tried USBDLM and it doesn't seem to have made any difference. Specs: ProLiant ML150 G5 with Windows 2003 Enterprise and all updates installed. Any ideas on what I can try to resolve this problem would be greatly appreciated. Chris

  Read the article

• Nvidia Optimus shows Nvidia card is always active in Windows 8

  - by Ty Underwood

  I have loaded the new Asus Nvidia driver for my Asus Ux32VD that I have installed Windows 8 on. It has an Nvidia 620m and Intel hd 4000 integrated graphics. The problem is that the Optimus activity icon in my system tray shows that the Nvidia card is always active, though it shows that it is not doing anything. I can force the system to prefer the Intel graphics, and after rebooting, the Nvidia card will shut off, but then all the programs will be overridden and use the Intel graphics. Is anyone else having problems with Optimus in Windows 8? My battery life is really suffering because I'm always idling my Nvidia card while also presumably running the Intel card. Any suggestions would be appreciated.

  Read the article

• Recovering a Windows XP License key

  - by Fortyrunner

  I threw out a Windows XP machine a while ago (the motherboard failed). I kept the hard drive and the XP installation media. Problem is the license key was on a sticker on the machine - doh! The original manufacturer has gone bust (Evesham) and I suspect that Microsoft will be of little help. Is there any easy way to get the license key off the hard disk? Can I just find the file with the registry data in it and get the key using a hex editor? I really need a spare XP key for use in a Windows VM.

  Read the article

• Booting a Windows 7 installation on different hardware

  - by tomfanning

  I'm in a situation where I could do with very quickly migrating a Windows 7 (RTM x64) installation from one machine to another. What options are open to me in terms of getting W7 to boot after the drive is picked up and moved from one box to another? I thought it was supposed to be a little less sensitive to this kind of move than XP, but it doesn't work - it is stuck in a reboot loop and never reaches a GUI. Tried a few things so far, none of which have worked: Changed SATA mode in the BIOS of the target machine between ATA and AHCI run Windows 7 Startup Repair tried safe mode, no change (I will keep this list up to date as suggestions come in) UPDATE: I can confirm this reboot loop is due to STOP error 0x0000007B, and these codes follow: 0xFFFFF880009A98E8 0xFFFFFFFFC0000034 0x0000000000000000 0x0000000000000000 UPDATE: I didn't get anywhere on this and I ended up just rebuilding the machine. I think it should be theoretically possible, so I'm going to leave the question open in case someone comes along in future with an answer.

  Read the article

• Can someone correct me about Windows 2008 DFS implementation

  - by cwheeler33

  I have 2 two Windows 2003 file servers using DoubleTake at the moment. They are in an 2003 AD domain. And each server has it's own disk set. It is time to replace the servers... I want to use Windows 2008 64bit Ent. I was thinking of using DFS-R to replace DoubleTake. The part I'm not sure about is clustering. Do I need to have shared storage if each server has a copy of the data? I want to have the data available to the same share name, so maybe I don't fully understand how DFS is set up. I currently have about 6TB of data. I expect to grow by 3TB a year on these file servers. Any resources/books that could teach me would be good to know as well.

  Read the article

• Trouble migrating Joomla from Linux to Windows server

  - by Matt

  I'm having some trouble migrating a Joomla website from a Linux server to a Windows server. The database came over fine, Besides that, all I've done is download all the files from the current site, and change configuration.php so the log and tmp directories show "./tmp/" and "./logs/" I keep having an error in the PHP log stating PHP Fatal error: Class 'JTable' not found I've downloaded the site multiple times now, and I'm convinced this is a configuration problem, and not a missing file problem. I've even tried installing a mod for backup on the linux box to try and migrate the site, but sadly the mod had problems installing. The new server is running IIS 7.5 on Windows Web Server. PHP 5.2.14 and MySQL

  Read the article

• What is the best way to run ClamAV on Windows Server 2008 R2

  - by gabbsmo

  I'm hosting a Wordpress-site on Windows Server 2008 RS and want to scan all files that are uploaded by users for viruses using this plugin http://wordpress.org/extend/plugins/upload-scanner/. I'm on a really tight budget (no profit) so ClamAV seem like a good choice. What is the best way to run ClamAV under these circumstances? I'm concidering the following options: Just running the raw windows build from http://sourceforge.net/projects/clamav/ an setup definition updates with task scheduler. Any way to automate updates of the scanner (binaries)? Using a "distro" like ClamWin or Immunet (advertised on clamav.net). Any suggestions are welcome.

  Read the article

• Start jade via batch script as service on windows server 2012 amazon ec2 instance

  - by E. Lüders

  I would like to start the Jade agent platform with a batch script on an windows server ec2 instance as a service. The reason for this is, that I want to start jade automatically at system startup. For creating the service I use nssm. However so far its working fine and the service is created. When I want to start the service I get an error message: Windows could not start the NAME service on Local Computer. The service did not return an error... My batch file contains only one line: java jade.Boot -platform-id P%random% If i execute the script via cmd it works fine. Anybody got an idea why this is not working if I start the batch script as a service?

  Read the article

• Tracking down random BSOD on windows 7

  - by pehrs

  I have gotten a computer running windows 7 handed to me that randomly, several times a day, bsods with a PAGE_FAULT_IN_NONPAGED_AREA (50) or WHEA_UNCORRECTABLE_ERROR (124). Crashes happens regardless of load. I am running out of ideas for how to track this down. Analyzing the minidumps shows the crash to be in ntkrnlmp.exe/WMIADAP.exe System has plenty of power (600w) Ram checks out fine using memtest86+ over a weekend. System is clean inside. No dust build up. Temperatures stay low. As far as I know (and reliability history shows) no new drivers were installed for several months before the problems started. All drivers are now up to date. sfc /scannow reports the system as clean. CHKDSK reports the disks as clean Removing the AV (Avast) has no effect. Any more things that should be tried on windows 7 before I start replacing the hardware?

  Read the article

• Problem installing Windows Server 2008 R2 on Xen 3.0

  - by GodEater

  Hi there folks, I've been googling this for a few hours now and not really getting anywhere. We have a Xen 3.0 host which I'm trying to install a copy of Windows Server 2008 R2 Standard Edition onto as a guest OS - but the install hangs at the "Starting Windows" screen when it starts running the installer. Is this is a known issue with the version of Xen we're running (I know it's positively ancient)? Is there a workaround for it at all? We've successfully got a great number of vanilla 2008 servers running on it, it appears it's an issue specific to R2. Bryan

  Read the article

• Best Facebook Client for Windows?

  - by Domingo

  Which is the best (in your opinion) facebook client for windows?

  Read the article

• Is there a smarter Find files utility for Windows 8 than Windows key + F?

  - by Clay Shannon

  Is there any utility for Windows 8 that will basically do the same thing the old "Find" dialog in Explorer did? Often times (many times a day) I need to find a particular file, and I don't know the name of it or where it is, but I can remember a phrase in it, and approximately when it was written, e.g., it has the phrase "Duckbilled Platypus" in it and was written sometime in the last week. The Find Files functionality in Windows 8 is lame by comparison; I know there are probably geeky ways to jump through hoops and do it, but I don't want to have to write GREP expressions, I want something easy like the old functionality...

  Read the article

• Windows replacement for HAProxy

  - by GrayWizardx

  It does not appear that there is a similar question to this already posted, so I will go ahead and ask. I am working on a project that could benefit from having two - four servers handling incoming requests to a backend webservice. The service does not require SSL but does need to support occassional long running processes (upto 120 secs). This project does not at present have the funding to purchase a hardware load balancing solution. I have previously used HAProxy as a solution for this, and found it very simple and straightforward. Is there a similar product for windows (server 2003 or 2008) which provides similar configuration options and runs as a lightweight service? For reasons outside my control I cannot setup a Linux machine (physical or virtual) and so I am looking for behaviour that can be deployed on a windows machine. I can only find Perlbal which appears to fall into this category. So as not to keep this open indifenitely I will give credit to the only answer.

  Read the article

• Get songs off of Windows iPod and onto a Mac

  - by Justing

  I have been using iTunes on a Dell running Windows XP to sync about 60 gigs of songs with my old school iPod. Well, the Dell's hard drive died the other day, and the only place that I have my music is on the iPod (I do have the CDs, but really don't want to have to re-rip 60 gigs of music). So, now I have a shiny new MacBook Pro. Is there a way to get my songs off of my iPod and onto the MacBook? I googled, and found Senuti. But, I'm leery of accidentally formating the iPod and losing my songs, and I can't tell if it is Snow Leopard compatible yet. Has anyone recently gone through this process? Please provide suggestions for copying songs from an iPod formated to work with Windows onto a MacBook Pro running Snow Leopard. Thanks!

  Read the article

• Windows 7 Wireless Network Adapter Stopped Working

  - by Andrew B Schultz

  I have a Windows 7 Ultimate machine where the wireless adapter all of a sudden started having trouble connecting to wireless networks. Whenever I go to a new place and try to connect to a wireless network, it says that the DNS server is not responding, and tells me to go unplug the router and try again. After several locations in a row telling me this, I began to realize something was wrong with my adapter, not the routers. I am no longer asked to identify the security level for any new networks (Work, Home, or Public) like I used to be (it defaults to Public now - with the park bench icon). Often, resetting the router doesn't even work. Running the Windows 7 troubleshooter doesn't give me anything better than the advice to reset the router. However, the adapter will still connect to the wireless network at my main office without any problems. Does anyone know why a wireless network adapter can get so finicky so suddenly? Thanks!

  Read the article

< Previous Page | 281 282 283 284 285 286 287 288 289 290 291 292  | Next Page >