Search Results

Search found 11246 results on 450 pages for 'power supply unit'.

Page 286/450 | < Previous Page | 282 283 284 285 286 287 288 289 290 291 292 293  | Next Page >

• Network card dies when trying to wake up laptop from sleep

  - by Bugmaster

  I have a Dell XPS 1640 laptop (aka Dell Studio XPS 16), running Vista. Whenever the laptop wakes up from sleep, my Broadcomm LAN card immediately dies. Any attempt to access it completely locks up whichever program I use to access it. There appears to be no way to re-awaken the card, other than rebooting; note that Vista does not even shut down properly if some program is waiting for the card. So far, I have tried the following: Disabled the "allow your computer to shut down this device to save power" in the device properties. This had no effect. Attempted to disable and then enable the card in the device properties. No effect. Tried ipconfig /renew: this locks up ipconfig to the point where I can't even kill its process. Force-install updated drivers from broadcomm: no effect. Does anyone have any other ideas ?

  Read the article

• Laptops trying to connect via wireless? Only able to connect only via wired connection

  - by Chris J. Lee

  It seems that all the wireless laptops in the office have disconnected and are unable to reconnect to the wifi after a terrible storm caused some power interruptions. Troubleshooting actions Verify wireless broadcasting is up With each laptop i ended up flushing their dns cache on Win 7 (ipconfig /flush ) Performed an ipconfig /all to see what the new ip is Made sure password was correct Reset the router (multiple times) restarted each laptop. Tried connecting wirelessly Am i missing some small detail ? Network information The router is a linksys/cisco WRVS4400N router. Supports a lot of fancy features i don't know how to use. We have 3 static ip's the conference room computer, the wireless printer, my computer Mostly windows machines, we have 3 mac users

  Read the article

• Problem accessing MICROSOFT##SSEE database (Error: 18456, Severity: 14, State: 16.)

  - by Philipp Schmid

  After an unexpected server shutdown due to a power failure, I can no longer connect to the internal windows database MICROSOFT##SSEE which is hosting Central Admin for my SBS 2008 server. The log shows: Error: 18456, Severity: 14, State: 16. Login failed for user 'NT AUTHORITY\NETWORK SERVICE'. [CLIENT: <named pipe>] I've tried to connect using the SQL Management studio (connecting to .pipemssql$microsoft##sseesqlquery) but no luck. The SQL Server Configuration Manager doesn't show a entry for 'Protocols for MICROSOFT##SSEE' (but shows it for 2 other database hosted on the same SQL server 2005 Express edition. I have tried to restore the master.ldf and mastlog.log files from a backup, but the issue persists.

  Read the article

• Exporting a VM running as a Domain Controller

  - by AndyM

  There is a Microsoft KB article that talks about best practices for running a DC on a VM. One of the notes is "Do not use the Export feature on a virtual machine that is running a domain controller". In order to export a VM, the VM needs to be turned off. If you turn off a DC VM, export it, import it on another server and then power the VM back on, there should be no risk as long as the original (exported) VM is never powered back on. Can someone explain to me why this isn't supported? After doing some searching on Google, the sites I found just regurgitated this line from the KB article, but didn't offer any explanation as to why this isn't supported.

  Read the article

• Vetting Github Pull requests with Hudson

  - by cdecker

  I've been using Gerrit and Hudson very successfully to test and automatically vote on new checkins in the past and now I'm wondering whether it is possible to set up Hudson so that it'll check Github at regular intervals and looks if there are new Pull Requests available. If yes it should apply the patch and run the unit tests against it, adding a comment to the pull request if no failure is detected. It would certainly reduce the amount of work going into vetting patches/pull requests. Is that possible at all, or should I stick with my Gerrit setup?

  Read the article

• Unable to diagnose Windows 7 lockup

  - by Delyan

  Basic info: Laptop Dell Studio XPS 13 (Intel P9600, 4GB RAM, NVidia 9400M card, 256G Samsung PM800 SSD) Windows 7 Ultimate, as well as Fedora 14 Here's the deal - Windows would just lock up out of nowhere, no log entries, no dumps, no BSOD, it just freezes. This happens mostly when idle (but it happened when I was using it too) and does not follow a concrete time frame. No input is accepted - only solution is to hold the power button. Although this sounds like a clean cut hardware issue, the reason I'm willing to rule this out is that my primary OS is Fedora 14. It's been working fine for the past 2 years and I've been stress testing the hardware (intentionally or not) every once in a while with no issues. I would like to ask if there's any way to get a diagnostic output from Windows in a situation such as this. The next step in my testing is to leave it in Safe Mode overnight and see if it locks up but even if I do that, I still need to figure out what component freezes it up during normal operation.

  Read the article

• Fedora Core 11 won't boot without a monitor

  - by feihtthief

  I have a P4 system that I installed Fedora 11 on. It will not boot without a monitor attached. The monitor can be off (not even have power plugged in), but must be attached. Without a monitor the hard disk thrashes around a bit like it's starting up services, but does not get to the point where I can ssh into the box. I have set the default runlevel to 3 and removed the rhgb entry from grub. Any suggestions welcome. Edit: I have already set the run-level to 3. The machine boots up fine with the monitor plugged in to the point where I can SSH into it. as soon as i unplug the monitor and reboot, it will not boot to that point.

  Read the article

• VirtualBox CPU usage 100% on host

  - by Sarveshwar

  I have installed VirtualBox 3.1.2 (latest) on my Windows 7 (x64). In the VirtualBox I've installed Windows 7 (x64). I have 4 GB RAM installed. The guest has been assigned a 1536 MB RAM. Sometimes the CPU usage on the host goes 100%. It happens everytime, in a few minutes, after starting the guest. Then it stops responding. Then I have to "power off the machine" from the menu without doing a proper shutdown. It happens with Windows XP as guest too (even when the RAM amount assigned to it was the same). What is the problem?

  Read the article

• Windows 7 just restarts, no BSOD, shows "Event ID 14 volsnap"

  - by Mdc007

  My Windows 7 just restarts without giving me a BSOD. When it reboots, it will hang sometimes and you have to let it rest. Sometimes it will print a message saying that Hal.dll is missing or corrupt. When it does restart I can't run a backup or a clone drive – it comes up with constant errors. I tried to run chkdsk – it says everything's clean. What is really puzzling is SyncToy on a different drive hangs half way through and won't run either. Machine: OCZ SSD Agility 2 for C drive SATA HDD for programs, documents on D drive MSI AMD 880 chipset Event viewer says something about critical power failure I/O operations and "Event ID 14 volsnap" – but that is just telling me the computer powered off which I already know.

  Read the article

• Areca 1880ix RAID hangs

  - by Dave

  Areca RAID controller ARC-1880ix-12 (firmware 1.50) hangs when on high load. My setup is: Chenbro 3U chassis Intel S5500BC mainboard Xeon 5603 CPU 16GB of RAM 12 Seagate SAS drives ST32000645SS (2 of them as hot spare, 10 as RAID10) Mellanox Infiniband HBA card This server is working as external infiniband storage for Xen VMs. When load is quite big Areca's firmware hangs - it becomes unreachable even from Areca's ethernet adapter. After resetting the server power it returns to normal operation. While Areca is hanged I can confirm that it is powered (ethernet link is active) and Infiniband HBA works Ok. Thanks in advance for any idea or suggestion where the problem might be!

  Read the article

• LVM mirroring VS RAID1

  - by syrenity

  Hi. Having learned a bit about LVM mirroring, I thought about replacing the current RAID-1 scheme I'm using to gain some flexibility. Problem is that according to what I found on the Internet, LVM is: 1) Slower then RAID-1, at least in reading (as only single volume being used for reading). 2) Non-reliable on power interrupts, and requires disk cache disabling for prevention of data loss. http://www.joshbryan.com/blog/2008/01/02/lvm2-mirrors-vs-md-raid-1/ Also it seems, at least to several setup guides I read (http://www.tcpdump.com/kb/os/linux/lvm-mirroring/intro.html), that one actually requires a 3rd disk for storing the LVM log. This makes the setup completely unusable on 2 disks installations, and lowers the amount of used mirror disks on higher amount of disks. Can anyone comment the above facts, and let me know his experience of using LVM mirroring? Thanks.

  Read the article

• MacBook start up problem

  - by DA

  I have an aging, ailing MacBook. The battery died on it a few months ago, but can still use it when plugged in. I recently upgraded it to Snow Leopard. Had it unplugged for a few days. Went to boot it up today and now get this symptom: start up chime white screen with apple logo shuts off That's all it'll do. I tried unplugging and holding down the power button for 30 seconds but that didn't remedy the situation. Any theories? Finally an excuse to get the 27" iMac?

  Read the article

• Intel Ethernet Bottlenecking Internet?

  - by Donald Darma

  I'm having trouble with my internet speeds. So I just recent build a pc and everything is fine. I installed the Intel drivers and connected to the internet. It connects but I'm only half the speed I should be getting. My normal speed is 20mbps but speedtest.net is only showing 10. It can't be my ISP (which is TWC if anyone is asking) because my other devices like my laptop and my smartphone are showing 20 down. Heres my system: CPU: i5 4430 HSF: Stock cooler Mobo: Gigabyte Z87MX-D3H GPU: x2 MSI R7950-3GD5/OC BE RAM: Crucial Ballistix Tactical Tracer 8GB dual channel PSU: Silencer High Performance Power Supply 750 Watt 80+ (It's a subdivision of OCZ) HDD: Seagate Barracuda 7200RPM 3TB SSD: Samsung 840 Evo 120 GB Case: Corsair Obsidian 350D Edit: I am using the stock adapter that is on the motherboard. I know for a fact that the cable is good because I used it on my laptop and it ran fine. Its a CAT5E cable. I also ran IPERF and its giving me the same results, 10 mbps.

  Read the article

• "Disk Not Found" Error when trying to install iso image of CentOs on ESXI using VSphere

  - by kamal

  When trying to install CentOs setup as an iso image on datastore, i get an error : "Disk Not Found". I am using ESXi 4.1 as host VM. Is there a way to attach DVD/CD as iso image ? I tried "Connect at Power on" Checked and Connect CD/DVD on the VSphere Console, but i still am unable ot get the iso image recognized as a DVD mounted image: Solved: if i look at the image size, it was 11 MB, so it WAS a boot iso, but nithing else, if we compare it with other boot images with complete iso's therein lies the solution. This boot.iso was from rBUILD/Conary packaging

  Read the article

• Laptop Locking Up

  - by David

  I am having a very weird issue on a Lenovo W510 laptop. It will lock up randomly. I have had it lock up during post, during the boot-up of Linux, during login, and after the login. The following are tests that I have performed on the laptop. I ran memtest I took out the extra memory module. I swapped the HDD with another HDD that had Windows 7 on it. (It BSOD'd, and before anyone could possibly read the error line, it restarts.) I tried taking the battery out and booting with only the Power cord. The only other options I can think of the problem being are the motherboard or the PSU. If anyone has any advice, I appreciate it. If not, the HP guy will be here in a few days to fix it. I would just love to call them up and tell them that the service is no longer needed.

  Read the article

• Computer Locks Up Completely When Resuming From Standby

  - by kcoppock

  Okay, so I'm having a strange issue lately with my desktop, and off the top of my head I'm not sure what the problem is, so I'm hoping for some ideas on how to track down the cause. First, my PC: AMD Phenom 9600 Quad-Core 2.4 GHz 4 GB DDR2 160 GB boot HDD 1 TB & 120 GB secondary HDD Nvidia GeForce 8600 GTS Windows 7 Professional 64-bit I have my power settings as follows: Turn off the display: 10 minutes Turn off hard disk: 20 minutes Sleep after: Never After a while, I'll come back to use my computer again, wiggle the mouse, and the screen comes back on like normal, but the desktop is unresponsive. I can move the cursor, but nothing responds to clicks or keyboard entry. If I click a few times with the mouse, the computer eventually locks up completely and the mouse cursor stops moving as well. After I restart, everything works just fine. Is there a log you recommend checking or really any suggestions would be welcome at this point. Thanks!

  Read the article

• How would you diagnose an integrated network card that doesn't show up on the device list?

  - by Tomer Gabel

  I've been setting up a server based around a Gigabyte GA-G33M-DS2R motherboard (G33, PCH9R with integrated Realtek 811B network device. I've enabled it in the BIOS, but it doesn't show up in the pre-boot PCI device list, isn't recognized by Windows (even after installing the chipset and networking drivers) and doesn't even show up via lspci. I've tried cycling power, disabling, cycling again, enabling, cycling again etc. to no avail. I'm sort of at a loss at this point; the board isn't under warranty anymore, but I'd rather not have to replace it. Any advice would be greatly appreciated...

  Read the article

• RAID 1 not performing as expected

  - by Faken

  I recently bought a new 320Gb hard drive for my computer to set up RAID 1 on it for some added security. Installation went as smooth as could possibly be (plug in power, plug in data cable, start up computer, Intel software recognized new drive, right click create RAID 1, done!). However, for some inexplicable reason, I seem to have strange test results when using BENCH32. On my old configuration, a single 7200 rpm drive, I achieved about 60 MB/s write and 70 MB/s read. With a new RAID 1 configuration, I would expect the write to be slightly diminished but read to be significantly improved (though not exactly double speed). However, with the new configuration, I am getting 90 MB/s write and only about 80 MB/s read. I should NOT be getting improved write performance, especially NOT better than read! What's going on? My system setup is: q6600 2.4ghz CPU 4Gb DDR2 667mhz RAM on board Intel ICH9R "RAID chip" 2x Seagate 7200 RPM 320GB drives in RAID 1 Widows 7 home premium 64-bit

  Read the article

• iSCSI SAN RAID 10 Performance -- Poor Read, Good Write

  - by Litzner

  I have a EqualLogic PS4000 SAN unit with the latest firmware, setup in RAID 10. I have 3 2TB Volumes on the SAN shared out via iSCSI on 2 eth ports on two different subnets. I have moved a test server over to this newly setup SAN, and my testing is showing me a problem. I am getting dismal read performance in everything except a test with 32 queue depth (see attach image) Write performance seems to be right about where it should be. I have tried MPIO on and off, on was slightly better but not much.

  Read the article

• Macbook superdrive got calibration problems

  - by Fractal

  I have an intel macbook dual 2Ghz, bought about three years ago. I've had some problems with the superdrive and changed it a year and a half ago. the drive is Matshita DVD-R UJ 857 now I'm into burning cd's again and try to burn a DVD with Toast Titanium from an .iso on my hard drive But it won't work. When I launch the burn, the disc suddenly stops turning, and an error log pops: medium error, sense code = 0x73, 0x03 then I try with the built in cd burner of the macbook as soon as I click burn, the cd stops turning in the drive, and error log says peripheral couldn't calibrate power of the laser required for medium so since I'm not that logical of a geek, I try my first idea: let's see with other brands of DVD! the problem is that it works, now. but I'd like for all of my medium to be usable, and I've already seen my ridata DVD being burn, so here's the question. What the hell is happening with my superdrive? :)

  Read the article

• Random shut down? Asus N53J Laptopi

  - by Mr.Y

  My Laptop is pretty new and today it random shut down on its own. I was surfing the net and the computer shut down on its own (Like losing power, without any warning). It was the 2nd time, the first time was 3 weeks ago. Btw it happens during cold days. I remember one time I was unable to turn on my laptop at all. So I'm pretty sure it's not related to heat issue... could it be the laptop is too "cold"? My room temperature is around 17=18 degree on average :P edit -I use Windows 7 Professional. -I run memtest86 once and it passed. -I run my laptop WITHOUT battery all the time.

  Read the article

• Can i create a virtual machine on my laptop to be used with another monitor?

  - by Ranhiru

  OK, the scenario is like this... I have my laptop... and I have another user without a unit. He has only a keyboard, mouse and a monitor. Is there anyway that I can make him use my computer by creating a virtual environment which he will access, BUT, without interfering with my work. I use my laptop and view my OS from the laptop monitor. I create a virtual environment (some OS probably XP) and run it. The virtual environment is displayed in the connected monitor and the other user uses it using the extra keyboard/mouse and the monitor but without interfering my screen! Is this possible? Stupid? Futuristic? Need more hardware?

  Read the article

• Software for capturing still image snapshots from video input

  - by cantabilesoftware

  What software is available that will let me watch video from a USB video capture device at full PAL/NTSC resolution and capture a still image at a button press? More info: I'm using a KaiserBaas USB capture device (http://www.kaiserbaas.com/kaiser-baas-product-page/converters/video-to-dvd-maker), and want to capture screen shots from a PS2 connected to it. I'd like to play the game at the full PS2 resolution and capture certain scenes. The device has a one-touch snapshot button on it, but I can't seem to make it work and there's no mention of it anywhere in the documentation. The device works and the video appears in Power Producer (the included software), but I think it previews it smaller than the full resolution. I could print screen it, but having to crop will be a pain.

  Read the article

• Remote access to BIOS?

  - by j-g-faustus

  I have a home server running headless (i.e. without a monitor), using ssh for remote access. This works fine most of the time, but I still need a graphics card and still need to drag out a monitor whenever I have to access BIOS, (re-)install the OS and similar. I know that there are business servers that let you control everything remotely (over Ethernet), including power up and BIOS access. Is this type of functionality available for "prosumer" class hardware? If so, where does it sit - should I look for motherboard support, a PCI-e card or an external device? And does this type of functionality have a name, so I know what to google for?

  Read the article

• How can I use mobile network account at server so home sync works

  - by Mike Gallagher

  I would like to be able to use a mobile network account while sitting at my server. I had os x server 10.6 running on a mac mini server but recently got a new quad core iMac and want to take advantage of the extra power. My problem - I can sit at the server and log into the mobile network account but can not get it to sync back. When I attempt to sync it get error message that the afp share point is unavailable and that the files are hosted locally. My goal is to be able to use the new iMac as the server and set a user account so that it remains synced so when the account is accessed from other clients, particularly my macbook pro. Is mobile account the best route? Would an external account be a better option. Any advice or ideas of where to read up on this would be much appreciated.

  Read the article

< Previous Page | 282 283 284 285 286 287 288 289 290 291 292 293  | Next Page >