Search Results

Search found 12013 results on 481 pages for 'dvd drive'.

Page 288/481 | < Previous Page | 284 285 286 287 288 289 290 291 292 293 294 295  | Next Page >

  • JAR files, don't they just bloat and slow Java down?

    - by Josamoto
    Okay, the question might seem dumb, but I'm asking it anyways. After struggling for hours to get a Spring + BlazeDS project up and running, I discovered that I was having problems with my project as a result of not including the right dependencies for Spring etc. There were .jars missing from my WEB-INF/lib folder, yes, silly me. After a while, I managed to get all the .jar files where they belong, and it comes at a whopping 12.5MB at that, and there's more than 30 of them! Which concerns me, but it probably and hopefully shouldn't be concerned. How does Java operate in terms of these JAR files, they do take up quite a bit of hard drive space, taking into account that it's compressed and compiled source code. So that can really quickly populate a lot of RAM and in an instant. My questions are: Does Java load an entire .jar file into memory when say for instance a class in that .jar is instantiated? What about stuff that's in the .jar that never gets used. Do .jars get cached somehow, for optimized application performance? When a single .jar is loaded, I understand that the thing sits in memory and is available across multiple HTTP requests (i.e. for the lifetime of the server instance running), unlike PHP where objects are created on the fly with each request, is this assumption correct? When using Spring, I'm thinking, I had to include all those fiddly .jars, wouldn't I just be better off just using native Java, with say at least and ORM solution like Hibernate? So far, Spring just took extra time configuring, extra hard drive space, extra memory, cpu consumption, so I'm concerned that the framework is going to cost too much application performance just to get for example, IoC implemented with my BlazeDS server. There still has to come ORM, a unit testing framework and bits and pieces here and there. It's just so easy to bloat up a project quickly and irresponsibly easily. Where do I draw the line?

    Read the article

  • Batch script is not executed if chcp was called

    - by Andy
    Hello! I'm trying to delete some files with unicode characters in them with batch script (it's a requirement). So I run cmd and execute: > chcp 65001 Effectively setting codepage to UTF-8. And it works: D:\temp\1>dir Volume in drive D has no label. Volume Serial Number is 8C33-61BF Directory of D:\temp\1 02.02.2010 09:31 <DIR> . 02.02.2010 09:31 <DIR> .. 02.02.2010 09:32 508 1.txt 02.02.2010 09:28 12 delete.bat 02.02.2010 09:20 95 delete.cmd 02.02.2010 09:13 <DIR> Rún 02.02.2010 09:13 <DIR> ????? ??????? 3 File(s) 615 bytes 4 Dir(s) 11 576 438 784 bytes free D:\temp\1>rmdir Rún D:\temp\1>dir Volume in drive D has no label. Volume Serial Number is 8C33-61BF Directory of D:\temp\1 02.02.2010 09:56 <DIR> . 02.02.2010 09:56 <DIR> .. 02.02.2010 09:32 508 1.txt 02.02.2010 09:28 12 delete.bat 02.02.2010 09:20 95 delete.cmd 02.02.2010 09:13 <DIR> ????? ??????? 3 File(s) 615 bytes 3 Dir(s) 11 576 438 784 bytes free Then I put the same rmdir commands in batch script and save it in UTF-8 encoding. But when I run nothing happens, literally nothing: not even echo works from batch script in this case. Even saving script in OEM encoding does not help. So it seems that when I change codepage to UTF-8 in console, scripts just stop working. Does somebody know how to fix that?

    Read the article

  • File mkdirs() method not working in android/java

    - by Leif Andersen
    I've been pulling out my hair on this for a while now. The following method is supposed to download a file, and save it to the location specified on the hard drive. private static void saveImage(Context context, boolean backgroundUpdate, URL url, File file) { if (!Tools.checkNetworkState(context, backgroundUpdate)) return; // Get the image try { // Make the file file.getParentFile().mkdirs(); // Set up the connection URLConnection uCon = url.openConnection(); InputStream is = uCon.getInputStream(); BufferedInputStream bis = new BufferedInputStream(is); // Download the data ByteArrayBuffer baf = new ByteArrayBuffer(50); int current = 0; while ((current = bis.read()) != -1) { baf.append((byte) current); } // Write the bits to the file OutputStream os = new FileOutputStream(file); os.write(baf.toByteArray()); os.close(); } catch (Exception e) { // Any exception is probably a newtork faiilure, bail return; } } Also, if the file doesn't exist, it is supposed to make the directory for the file. (And if there is another file already in that spot, it should just not do anything). However, for some reason, the mkdirs() method never makes the directory. I've tried everything from explicit parentheses, to explicitly making the parent file class, and nothing seems to work. I'm fairly certain that the drive is writable, as it's only called after that has already been determined, also that is true after running through it while debugging. So the method fails because the parent directories aren't made. Can anyone tell me if there is anything wrong with the way I'm calling it? Also, if it helps, here is the source for the file I'm calling it in: https://github.com/LeifAndersen/NetCatch/blob/master/src/net/leifandersen/mobile/android/netcatch/services/RSSService.java Thank you

    Read the article

  • Wordpress Admin Panel Code Input

    - by Wes
    I've got a wordpress admin panel for one of my themes and one of the boxes has an input for some code to drive google adsense. when I put the code into the box and call it with my php tags the code comes out like this: <script type="\&quot;text/javascript\&quot;"><!-- google_ad_client = \"pub-9295546347478163\"; /* Leaderboard 5/17/2010 */ google_ad_slot = \"7593465074\"; google_ad_width = 728; google_ad_height = 90; //--> </script> <script type="\&quot;text/javascript\&quot;" src="%5C%22http://pagead2.googlesyndication.com/pagead/show_ads.js%5C%22"> </script> Which I assume is a feature to stop SQL injections. How can I call pure code form a box? This is how I currently have that textbox setup. array( "name" => "Code for Top ad", "desc" => "Enter the HTML that will drive the banner ad for the page header", "id" => $shortname."_headerAd", "type" => "textarea"), and then echo it out with this: <?php echo get_option('lifestyle_headerAd'); ?>

    Read the article

  • Log4j Logging to the Wrong Directory

    - by John
    I have a relatively complex log4j.xml configuration file with many appenders. Some machines the application runs on need a separate log directory, which is actually a mapped network drive. To get around this, we embed a system property as part of the filename in order to specify the directory. Here is an example: The "${user.dir}" part is set as a system property on each system, and is normally set to the root directory of the application. On some systems, this location is not the root of the application. The problem is that there is always one appender where this is not set, and the file appears not to write to the mapped drive. The rest of the appenders do write to the correct location per the system property. As a unit test, I set up our QA lab to hard-code the values for the appender above, and it worked: however, a different appender will then append to the wrong file. The mis-logged file is always the same for a given configuration: it is not a random file each time. My best educated guess is that there is a HashMap somewhere containing these appenders, and for some reason, the first one retrieved from the map does not have the property set. Our application does have custom system properties loading: the main() method loads a properties file and calls into System.setProperties(). My first instinct was to check the static initialization order, and to ensure the controller class with the main method does not call into log4j (directly or indirectly) before setting the properties just in case this was interfering with log4j's own initialization. Even removing all vestiges of log4j from the initialization logic, this error condition still occurs.

    Read the article

  • When I shutdown the computer, it restarts

    - by Prabu
    I am unable to shutdown. Whenever I try to shutdown, it reboots. I am running Ubuntu 12.10. I have run the boot-repair and this is the result: Boot Info Script 0.61.full + Boot-Repair extra info [Boot-Info November 20th 2012] ============================= Boot Info Summary: =============================== => Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of the same hard drive for core.img. core.img is at this location and looks in partition 1 for (,msdos1)/boot/grub. sda1: __________________________________________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Ubuntu 12.10 Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/i386-pc/core.img sda2: __________________________________________________________________________ File system: Extended Partition Boot sector type: - Boot sector info: sda5: __________________________________________________________________________ File system: swap Boot sector type: - Boot sector info: ============================ Drive/Partition Info: ============================= Drive: sda _____________________________________________________________________ Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sda1 * 2,048 1,936,809,983 1,936,807,936 83 Linux /dev/sda2 1,936,812,030 1,953,523,711 16,711,682 5 Extended /dev/sda5 1,936,812,032 1,953,523,711 16,711,680 82 Linux swap / Solaris "blkid" output: ________________________________________________________________ Device UUID TYPE LABEL /dev/loop0 squashfs /dev/sda1 229a5484-7659-4ce1-98ce-2f05f61a1ffa ext4 /dev/sda5 6c6dca25-ab67-4de4-8602-26fdb6154781 swap /dev/sr0 iso9660 Ubuntu 12.10 amd64 ================================ Mount points: ================================= Device Mount_Point Type Options /dev/loop0 /rofs squashfs (ro,noatime) /dev/sr0 /cdrom iso9660 (ro,noatime) =========================== sda1/boot/grub/grub.cfg: =========================== -------------------------------------------------------------------------------- # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ x"${feature_menuentry_id}" = xy ]; then menuentry_id_option="--id" else menuentry_id_option="" fi export menuentry_id_option if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { if [ x$feature_all_video_module = xy ]; then insmod all_video else insmod efi_gop insmod efi_uga insmod ieee1275_fb insmod vbe insmod vga insmod video_bochs insmod video_cirrus fi } if [ x$feature_default_font_path = xy ] ; then font=unicode else insmod part_msdos insmod ext2 set root='hd0,msdos1' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 229a5484-7659-4ce1-98ce-2f05f61a1ffa else search --no-floppy --fs-uuid --set=root 229a5484-7659-4ce1-98ce-2f05f61a1ffa fi font="/usr/share/grub/unicode.pf2" fi if loadfont $font ; then set gfxmode=auto load_video insmod gfxterm set locale_dir=$prefix/locale set lang=en_US insmod gettext fi terminal_output gfxterm if [ "${recordfail}" = 1 ]; then set timeout=10 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray if background_color 44,0,30; then clear fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### function gfxmode { set gfxpayload="${1}" if [ "${1}" = "keep" ]; then set vt_handoff=vt.handoff=7 else set vt_handoff= fi } if [ "${recordfail}" != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode if [ "${linux_gfx_mode}" != "text" ]; then load_video; fi menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-229a5484-7659-4ce1-98ce-2f05f61a1ffa' { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='hd0,msdos1' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 229a5484-7659-4ce1-98ce-2f05f61a1ffa else search --no-floppy --fs-uuid --set=root 229a5484-7659-4ce1-98ce-2f05f61a1ffa fi linux /boot/vmlinuz-3.5.0-19-generic root=UUID=229a5484-7659-4ce1-98ce-2f05f61a1ffa ro quiet splash acpi=force $vt_handoff initrd /boot/initrd.img-3.5.0-19-generic } submenu 'Advanced options for Ubuntu' $menuentry_id_option 'gnulinux-advanced-229a5484-7659-4ce1-98ce-2f05f61a1ffa' { menuentry 'Ubuntu, with Linux 3.5.0-19-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.5.0-19-generic-advanced-229a5484-7659-4ce1-98ce-2f05f61a1ffa' { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='hd0,msdos1' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 229a5484-7659-4ce1-98ce-2f05f61a1ffa else search --no-floppy --fs-uuid --set=root 229a5484-7659-4ce1-98ce-2f05f61a1ffa fi echo 'Loading Linux 3.5.0-19-generic ...' linux /boot/vmlinuz-3.5.0-19-generic root=UUID=229a5484-7659-4ce1-98ce-2f05f61a1ffa ro quiet splash acpi=force $vt_handoff echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.5.0-19-generic } menuentry 'Ubuntu, with Linux 3.5.0-19-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.5.0-19-generic-recovery-229a5484-7659-4ce1-98ce-2f05f61a1ffa' { recordfail insmod gzio insmod part_msdos insmod ext2 set root='hd0,msdos1' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 229a5484-7659-4ce1-98ce-2f05f61a1ffa else search --no-floppy --fs-uuid --set=root 229a5484-7659-4ce1-98ce-2f05f61a1ffa fi echo 'Loading Linux 3.5.0-19-generic ...' linux /boot/vmlinuz-3.5.0-19-generic root=UUID=229a5484-7659-4ce1-98ce-2f05f61a1ffa ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.5.0-19-generic } menuentry 'Ubuntu, with Linux 3.5.0-17-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.5.0-17-generic-advanced-229a5484-7659-4ce1-98ce-2f05f61a1ffa' { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='hd0,msdos1' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 229a5484-7659-4ce1-98ce-2f05f61a1ffa else search --no-floppy --fs-uuid --set=root 229a5484-7659-4ce1-98ce-2f05f61a1ffa fi echo 'Loading Linux 3.5.0-17-generic ...' linux /boot/vmlinuz-3.5.0-17-generic root=UUID=229a5484-7659-4ce1-98ce-2f05f61a1ffa ro quiet splash acpi=force $vt_handoff echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.5.0-17-generic } menuentry 'Ubuntu, with Linux 3.5.0-17-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.5.0-17-generic-recovery-229a5484-7659-4ce1-98ce-2f05f61a1ffa' { recordfail insmod gzio insmod part_msdos insmod ext2 set root='hd0,msdos1' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 229a5484-7659-4ce1-98ce-2f05f61a1ffa else search --no-floppy --fs-uuid --set=root 229a5484-7659-4ce1-98ce-2f05f61a1ffa fi echo 'Loading Linux 3.5.0-17-generic ...' linux /boot/vmlinuz-3.5.0-17-generic root=UUID=229a5484-7659-4ce1-98ce-2f05f61a1ffa ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.5.0-17-generic } } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_msdos insmod ext2 set root='hd0,msdos1' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 229a5484-7659-4ce1-98ce-2f05f61a1ffa else search --no-floppy --fs-uuid --set=root 229a5484-7659-4ce1-98ce-2f05f61a1ffa fi linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_msdos insmod ext2 set root='hd0,msdos1' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 229a5484-7659-4ce1-98ce-2f05f61a1ffa else search --no-floppy --fs-uuid --set=root 229a5484-7659-4ce1-98ce-2f05f61a1ffa fi linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/30_uefi-firmware ### ### END /etc/grub.d/30_uefi-firmware ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f ${config_directory}/custom.cfg ]; then source ${config_directory}/custom.cfg elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### -------------------------------------------------------------------------------- =============================== sda1/etc/fstab: ================================ -------------------------------------------------------------------------------- # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> # / was on /dev/sda1 during installation UUID=229a5484-7659-4ce1-98ce-2f05f61a1ffa / ext4 errors=remount-ro 0 1 # swap was on /dev/sda5 during installation UUID=6c6dca25-ab67-4de4-8602-26fdb6154781 none swap sw 0 0 -------------------------------------------------------------------------------- =================== sda1: Location of files loaded by Grub: ==================== GiB - GB File Fragment(s) 200.155235291 = 214.915047424 boot/grub/grub.cfg 1 40.280788422 = 43.251167232 boot/initrd.img-3.5.0-17-generic 1 2.468288422 = 2.650304512 boot/initrd.img-3.5.0-19-generic 1 200.149234772 = 214.908604416 boot/vmlinuz-3.5.0-17-generic 1 1.990135193 = 2.136891392 boot/vmlinuz-3.5.0-19-generic 1 2.468288422 = 2.650304512 initrd.img 1 1.990135193 = 2.136891392 vmlinuz 1 1.990135193 = 2.136891392 vmlinuz.old 1 =============================== StdErr Messages: =============================== cat: write error: Broken pipe File descriptor 8 (/proc/6297/mounts) leaked on lvscan invocation. Parent PID 13390: bash No volume groups found ADDITIONAL INFORMATION : =================== log of boot-repair 2012-12-17__01h53 =================== boot-repair version : 3.197~ppa1~quantal boot-sav version : 3.197~ppa1~quantal glade2script version : 3.2.2~ppa45~quantal boot-sav-extra version : 3.197~ppa1~quantal boot-repair is executed in live-session (Ubuntu 12.10, quantal, Ubuntu, x86_64) CPU op-mode(s): 32-bit, 64-bit file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- maybe-ubiquity =================== os-prober: /dev/sda1:Ubuntu 12.10 (12.10):Ubuntu:linux =================== blkid: /dev/loop0: TYPE="squashfs" /dev/sr0: LABEL="Ubuntu 12.10 amd64" TYPE="iso9660" /dev/sda1: UUID="229a5484-7659-4ce1-98ce-2f05f61a1ffa" TYPE="ext4" /dev/sda5: UUID="6c6dca25-ab67-4de4-8602-26fdb6154781" TYPE="swap" 1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS. Warning: extended partition does not start at a cylinder boundary. DOS and Linux will interpret the contents differently. =================== sda1/etc/default/grub : # If you change this file, run 'update-grub' afterwards to update # /boot/grub/grub.cfg. # For full documentation of the options in this file, see: # info -f grub -n 'Simple configuration' GRUB_DEFAULT=0 GRUB_HIDDEN_TIMEOUT=0 GRUB_HIDDEN_TIMEOUT_QUIET=true GRUB_TIMEOUT=10 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` GRUB_CMDLINE_LINUX_DEFAULT="quiet splash acpi=force" GRUB_CMDLINE_LINUX="" # Uncomment to enable BadRAM filtering, modify to suit your needs # This works with Linux (no patch required) and with any kernel that obtains # the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...) #GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef" # Uncomment to disable graphical terminal (grub-pc only) #GRUB_TERMINAL=console # The resolution used on graphical terminal # note that you can use only modes which your graphic card supports via VBE # you can see them in real GRUB with the command `vbeinfo' #GRUB_GFXMODE=640x480 # Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux #GRUB_DISABLE_LINUX_UUID=true # Uncomment to disable generation of recovery mode menu entries #GRUB_DISABLE_RECOVERY="true" # Uncomment to get a beep at grub start #GRUB_INIT_TUNE="480 440 1" =================== sda1/etc/grub.d/ : drwxr-xr-x 2 root root 4096 Oct 17 14:59 grub.d total 72 -rwxr-xr-x 1 root root 7541 Oct 14 17:36 00_header -rwxr-xr-x 1 root root 5488 Oct 4 09:30 05_debian_theme -rwxr-xr-x 1 root root 10891 Oct 14 17:36 10_linux -rwxr-xr-x 1 root root 10258 Oct 14 17:36 20_linux_xen -rwxr-xr-x 1 root root 1688 Oct 11 14:10 20_memtest86+ -rwxr-xr-x 1 root root 10976 Oct 14 17:36 30_os-prober -rwxr-xr-x 1 root root 1426 Oct 14 17:36 30_uefi-firmware -rwxr-xr-x 1 root root 214 Oct 14 17:36 40_custom -rwxr-xr-x 1 root root 216 Oct 14 17:36 41_custom -rw-r--r-- 1 root root 483 Oct 14 17:36 README =================== UEFI/Legacy mode: This live-session is not in EFI-mode. SecureBoot maybe enabled. =================== PARTITIONS & DISKS: sda1 : sda, not-sepboot, grubenv-ok grub2, grub-pc , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, /mnt/boot-sav/sda1. sda : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, has-os, 2048 sectors * 512 bytes =================== parted -l: Model: ATA ST1000DM003-1CH1 (scsi) Disk /dev/sda: 1000GB Sector size (logical/physical): 512B/4096B Partition Table: msdos Number Start End Size Type File system Flags 1 1049kB 992GB 992GB primary ext4 boot 2 992GB 1000GB 8556MB extended 5 992GB 1000GB 8556MB logical linux-swap(v1) Warning: Unable to open /dev/sr0 read-write (Read-only file system). /dev/sr0 has been opened read-only. Error: Can't have a partition outside the disk! =================== parted -lm: BYT; /dev/sda:1000GB:scsi:512:4096:msdos:ATA ST1000DM003-1CH1; 1:1049kB:992GB:992GB:ext4::boot; 2:992GB:1000GB:8556MB:::; 5:992GB:1000GB:8556MB:linux-swap(v1)::; Warning: Unable to open /dev/sr0 read-write (Read-only file system). /dev/sr0 has been opened read-only. Error: Can't have a partition outside the disk! =================== mount: /cow on / type overlayfs (rw) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) udev on /dev type devtmpfs (rw,mode=0755) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755) /dev/sr0 on /cdrom type iso9660 (ro,noatime) /dev/loop0 on /rofs type squashfs (ro,noatime) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) tmpfs on /tmp type tmpfs (rw,nosuid,nodev) none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880) none on /run/shm type tmpfs (rw,nosuid,nodev) none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755) gvfsd-fuse on /run/user/ubuntu/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=ubuntu) /dev/sda1 on /mnt/boot-sav/sda1 type ext4 (rw) =================== ls: /sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda5 size slaves stat subsystem trace uevent /sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent /dev (filtered): alarm ashmem autofs binder block bsg btrfs-control bus cdrom cdrw char console core cpu cpu_dma_latency disk dri dvd dvdrw ecryptfs fb0 fd full fuse fw0 hidraw0 hidraw1 hpet input kmsg kvm log mapper mcelog mei mem net network_latency network_throughput null oldmem port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda5 sg0 sg1 shm snapshot snd sr0 stderr stdin stdout uinput urandom usb vga_arbiter vhost-net zero ls /dev/mapper: control =================== df -Th: Filesystem Type Size Used Avail Use% Mounted on /cow overlayfs 3.9G 100M 3.8G 3% / udev devtmpfs 3.9G 12K 3.9G 1% /dev tmpfs tmpfs 1.6G 864K 1.6G 1% /run /dev/sr0 iso9660 763M 763M 0 100% /cdrom /dev/loop0 squashfs 717M 717M 0 100% /rofs tmpfs tmpfs 3.9G 32K 3.9G 1% /tmp none tmpfs 5.0M 4.0K 5.0M 1% /run/lock none tmpfs 3.9G 176K 3.9G 1% /run/shm none tmpfs 100M 52K 100M 1% /run/user /dev/sda1 ext4 910G 26G 838G 3% /mnt/boot-sav/sda1 =================== fdisk -l: Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x000da1e9 Device Boot Start End Blocks Id System /dev/sda1 * 2048 1936809983 968403968 83 Linux /dev/sda2 1936812030 1953523711 8355841 5 Extended Partition 2 does not start on physical sector boundary. /dev/sda5 1936812032 1953523711 8355840 82 Linux swap / Solaris Partition outside the disk detected. =================== Recommended repair Recommended-Repair This setting will reinstall the grub2 of sda1 into the MBR of sda. Additional repair will be performed: unhide-bootmenu-10s Unhide GRUB boot menu in sda1/etc/default/grub grub-install (GRUB) 2.00-7ubuntu11,grub-install (GRUB) 2. Reinstall the GRUB of sda1 into the MBR of sda Installation finished. No error reported. grub-install /dev/sda: exit code of grub-install /dev/sda:0 chroot /mnt/boot-sav/sda1 update-grub Generating grub.cfg ... Found linux image: /boot/vmlinuz-3.5.0-19-generic Found initrd image: /boot/initrd.img-3.5.0-19-generic Found linux image: /boot/vmlinuz-3.5.0-17-generic Found initrd image: /boot/initrd.img-3.5.0-17-generic Found memtest86+ image: /boot/memtest86+.bin Unhide GRUB boot menu in sda1/boot/grub/grub.cfg Boot successfully repaired. You can now reboot your computer.

    Read the article

  • Xenserver 5.6 SR_BACKEND_FAILURE_47 no such volume group, but it is there

    - by Juan Carlos
    I've looked everywhere (Google, here, a bunch of other sites), and while I have found people with similar problems, I couldn't find a single one with a solution to this. Last night our xenserver 5.6 box corrupted the /var/xapi/state.db, and I couldn't fix the xml, no matter what I did. After a good hour fiddling with the file, I figured it would be faster to just reinstall. The server had one 2tb hard drive running Xen and its VMs, and since Xen's install said it would erase the hard drive it was installed on, I plugged a new harddrive and installed Xen on it, without selecting any hard drives for storage. I Figured I could make it happen after install, using the partition on the old harddrive with all my VMs on it. After instalation finished and the system booted I did: #fdisk -l found the old partition at /dev/sda3 #ll /dev/disk/by-id found the partition at /dev/disk/by-id/scsi-3600188b04c02f100181ab3a48417e490-part3 #xe host-list uuid ( RO) : a019d93e-4d84-4a4b-91e3-23572b5bd8a4 name-label ( RW): xenserver-scribfourteen name-description ( RW): Default install of XenServer #pvscan PV /dev/sda3 VG VG_XenStorage-405a2ece-d10e-d6c5-ede2-e1ad2c29c68d lvm2 [1.81 TB / 204.85 GB free] Total: 1 [1.81 TB] / in use: 1 [1.81 TB] / in no VG: 0 [0 ] #vgscan Reading all physical volumes. This may take a while... Found volume group "VG_XenStorage-405a2ece-d10e-d6c5-ede2-e1ad2c29c68d" using metadata type lvm2 # pvdisplay --- Physical volume --- PV Name /dev/sda3 VG Name VG_XenStorage-405a2ece-d10e-d6c5-ede2-e1ad2c29c68d PV Size 1.81 TB / not usable 6.97 MB Allocatable yes PE Size (KByte) 4096 Total PE 474747 Free PE 52441 Allocated PE 422306 PV UUID U03Gt9-WtHi-8Nnu-QB2Q-c7BV-CO9A-cFpYWW # xe sr-introduce name-label="VMs" type=lvm uuid=U03Gt9-WtHi-8Nnu-QB2Q-c7BV-CO9A-cFpYWW name-description="VMs Local HD Storage" content-type=user shared=false device-config=:device=/dev/disk/by-id/scsi-3600188b04c02f100181ab3a483f9f0ae-part3 U03Gt9-WtHi-8Nnu-QB2Q-c7BV-CO9A-cFpYWW # xe pbd-create host-uuid=a019d93e-4d84-4a4b-91e3-23572b5bd8a4 sr-uuid=U03Gt9-WtHi-8Nnu-QB2Q-c7BV-CO9A-cFpYWW device-config:device=/dev/disk/by-id/scsi-3600188b04c02f100181ab3a483f9f0ae-part3 adf92b7f-ad40-828f-0728-caf94d2a0ba1 # xe pbd-plug uuid=adf92b7f-ad40-828f-0728-caf94d2a0ba1 Error code: SR_BACKEND_FAILURE_47 Error parameters: , The SR is not available [opterr=no such volume group: VG_XenStorage-U03Gt9-WtHi-8Nnu-QB2Q-c7BV-CO9A-cFpYWW] At this point I did a # vgrename VG_XenStorage-405a2ece-d10e-d6c5-ede2-e1ad2c29c68d VG_XenStorage-U03Gt9-WtHi-8Nnu-QB2Q-c7BV-CO9A-cFpYWW cause the VG name was different, but pdb-plug still gives me the same error. So, now I'm kinda lost about what to do, I'm not used to Xen and most sites I've been finding are really unhelpful. I hope someone can guide me in the right way to fix this. I cant lose those VMs (got backups, but from inside the guests, not the VMs themselves).

    Read the article

  • Office 2007 Setup prompts for PptLR.cab

    - by kamleshrao
    While running Office 2007 Ultimate Setup on Windows 7 box, I get this error message - "Setup cannot find PowerPoint.en-us\PptLR.cab". This file is very much present in the setup folder. It gives me an option to choose the correct path of this file, but when I browse and navigate to the folder containing this file, it doesn't show me the CAB file for selection. I tried installing both from DVD and also running setup from hard disk location. The same setup media was used earlier for installation on Vista without any issues!

    Read the article

  • Installing Win7 over PXE through Serva fails on Loading Network Resources

    - by Armand
    Trying to install Win7 OS to a Lenovo E335 with no DVD/CD. I have to do it either over PXE/Network or USB. Although I am able to get passt the installation menu of Serva, it fails on Loading Network Resources ... FAILED No NIC/Driver, ABORTING! This is the only log on the Serva Client PC and nothing on the Serva-server. Would appreciate if someone can tell me how to go pass this error. THe network card works fine, it has already loaded the Windows installation structure on a X: drive on the new laptop. Another detail: I am using a normal Ethernet Cable to connect the PCs. Should this be enough or a crossover cable is a must in this case?

    Read the article

  • Network Error: no buffer space available

    - by braindump
    After some time of running fine, one of our Windows XP SP3 machines does not open some(!) new TCP/IP connections anymore. Putty says "Network Error: no buffer space available", IE won't open any new connections but e.g. network drive mappings still work, even new ones can be established. netstat does not show more open connections that usual, ping and dns lookups work fine. Any hints?

    Read the article

  • hp ProLiant DL380 G6 server error code: 347 of array controller

    - by alhaythum
    I have got a bran new hp ProLiant DL380 G6 server with embedded smart array P410i controller, I got 164 GB SATA drives and wanted to change them with 300 GB SATA drives before installation. Now, we replace the drives and begin the configuration with the hp DVD and begin; when we reach the point that we want to save the configurations, an error message appears: "The operation has failed with an unknown error, please restart the application and attempt the operation again" When using Rescan System, this error message appears: "Status Alerts - Smart Array P410i in Embedded Slot Warning Status Message Code Description 347 The cache for Smart Array P410i Embedded Slot is not configured" We return back to the 164 GB SATA drives and the message just keeps appearing again. Any help please.

    Read the article

  • Slow local file transfer (copy) on ESX vmware server?

    - by Sorin Sbarnea
    I have a 8 CPU VmWare ESX server (3.5) with 4 HDD drives in RAID that is not loaded at all. I enabled SSH and installed mc (midnight commander) in order to be able to copy(clone) virtual machines but I observed that if does copy the files very slow - around 3.5mb/s on local drive. Why is this happening and how should I solve the issue?

    Read the article

  • What does the condition "new pull" mean?

    - by Nathan DeWitt
    I'm looking for a hard drive, and some of the conditions are listed as "New Pull" or "System Pull". I figure the System Pull means "taken from a computer and now sold separately" but what does New Pull mean? Does this mean it was assembled and never used? Or maybe it has been freshly pulled from a used machine?

    Read the article

  • hp dl580 g5 diag error

    - by maruti
    server disk access is slow, and running insight diagnostics reports this error: Error: 640003 DST Error Error: 640006: The Read and/or Write HARD error rate is above threshold This drive has experienced/recorded error conditions reported by diagnosis and requires replacement"

    Read the article

  • Cannot install Windows 7 on new PC (BSOD during installation)

    - by andronz
    Yesterday I had received new hardware and tried to assemble all of it. But when I was installing Windows 7 x64 for two times I got a BSOD, and a error message like this: Your PC has rebooted unexpectly, installation will continue after reboot. I have checked everything and tried to install once more time. It was almost successful, Windows had installed, but I cannot format my disk, open cmd or control panel, boot from DVD etc. It's the first time I have assembled a PC, and I don't know where the problem is, in my hardware or in Windows. My components: MSI z77a-g43 Intel i5 3570k Seagate Barracuda (plug into sata3 slot 6 Gb, there I have also sata 3 Gb slot) Corsair XMS3 (4x4Gb) HIS IceQ Also in the BIOS, I have changed RAM frequency to DDR3 1600 and voltage to 1.65v

    Read the article

  • Which part of the computer needs all the power from the PSU?

    - by Xeoncross
    A couple years ago I was building a new Core 2 Quad system and after reading all the reviews was convinced that I would need at least a 400 watt power supply unit (PSU). I bought a 500W Antec EarthWatts However, last year I bought a Kill-A-Watt power meter to test some things around our house and found that my PC was only using 80W of power while idle! (C2Q, 4GB RAM, SATA HD, & DVD burner) Well, here I am building another computer with a 65watt Core 2 CPU in it and I'm wondering if I can skimp out this time and get a 300watt or so unit since my usage doesn't seem to be what everyone claims it is. I'm sure that the people in the reviews who exhausted 500watt PSU weren't lying - so what is it that uses all that? The high-end dual SLI video cards? Lots of SATA drives? Overclocking?

    Read the article

  • Can't upgrade Windows Server 2012 Essentials to Windows Server 2012 R2 Essentials

    - by Magnus
    So today was RTM of Windows Server 2012 R2 Essentials released. I immediately tried to do an in-place upgrade of an existing RTM 2012 Essentials to RTM 2012 R2 Essentials, but get: Windows Server 2012 Essentials cannot be upgraded to Windows Server 2012 R2 Essentials. You can choose to install a new copy of Windows Server 2012 R2 Essentials instead, but this is different from an upgrade, and does not keep your files, settings, and programs. You’ll need to reinstall any programs using the original installation discs or files. To save your files before installing Windows, back them up to an external location such as a CD, DVD, or external hard drive. To install a new copy of Windows Server 2012 R2 Essentials, click the Back button in the upper left-hand corner, and select “Custom (advanced)”. This seems a bit odd, is this really the case? I can't find anything in the official documentation stating that this upgrade isn't possible.

    Read the article

  • Eject disk on Mac Pro running VMWare ESXi

    - by DougN
    I'm almost embarrassed to ask this, but I'm stuck. I installed VMWare ESXi on a Mac Pro. It's working great! The problem is that you press F12 to eject the disk, and F12 is what you use to shutdown ESX. I can power down, open the case, pull out the CD drive and use a paper clip to force the drawer open, but that's kind of a pain. Any other way to do this?

    Read the article

  • Office 2007 Setup prompts for PptLR.cab

    - by kamleshrao
    While running Office 2007 Ultimate Setup on Windows 7 box, I get this error message - "Setup cannot find PowerPoint.en-us\PptLR.cab". This file is very much present in the setup folder. It gives me an option to choose the correct path of this file, but when I browse and navigate to the folder containing this file, it doesn't show me the CAB file for selection. I tried installing both from DVD and also running setup from hard disk location. The same setup media was used earlier for installation on Vista without any issues!

    Read the article

  • Group Policy: Block access to \\localhost\C$

    - by Ryan R
    We have a restricted Windows 7 computer that hides and prevents non-admin users from accessing the C Drive. However, they are able to circumvent this by typing the following into Explorer: \\localhost\C$ How can I disable this path but allow other UNC paths. For example they are allowed to access a shared folder on a different computer. eg. \\192.168.2.1\SharedTransfer Note: Simply Enabling the Group Policy: Remove Run menu from Start Menu will not work as this blocks all UNC paths.

    Read the article

  • Windows 7 allow pinning exe on network share to taskbar

    - by petebob796
    I am just configuring my new Windows 7 work machine and have discovered that I can't pin an exe on a network drive to the taskbar. Are there any work arounds to this e.g. Registry Edits. I can understand the reasoning it's not allowed by default for newbies as the network location may later not exist but I am certain it always will.

    Read the article

  • Is the Core i5 Processor from Intel like the Celerons of yesteryear?

    - by Chris
    The title pretty much says it. I know that the Core i7's are Quad Core and Hyper-threaded (so 4 cores, and 8 logical), and the Core i5's are Quad Core as well but not Hyper-threaded, does this really make a difference? Or are the only people who are going to care are the ones who CPU intensive operations? I'm a developer, so I'm more concerned about hard drive speed most times than CPU speed. Any thoughts?

    Read the article

  • Sysprep and Capture task sequence failing using MDT 2010

    - by Nic Young
    I have created a Windows Deployment Services server in Windows 2008 R2. When I originally set it up I was able to successfully use MDT 2010 to create my boot images as well as creating task sequences that would sysprep and capture, and deploy my custom .wim files. Everything was working perfectly. About a month later I boot up my Windows 7 x86 image and run Windows updates to keep my image up to date. I then go and run my sysprep and capture task sequence and I get the following errors: I searched online for the cause of this error message and it just seems to be a generic permission denied type of error message. I then decided to completely rebuild my VM image from scratch and try again. I am still getting the same error messages as before. The following is what I have tried troubleshooting this issue: Troubleshooting: I have ensured that that UAC and the firewall is turned completely off when trying to capture the image. I have tried recreating the task sequence and making sure that the deployment share is updated. I have ensured that the local Administrator account is enabled and has the same password as specified in the task sequence. I have tried joining the computer to the domain and running the task sequence and I get a different error: I have attempted to run the script from the command prompt with "Run as Administrator" and I still receive the same errors above. For testing purposes I have ensured that Everyone has read/write access to my deployment share. I have spent days on trying to resolve this to no avail. Any ideas? EDIT: Below is the log info from C:\Windows\Deploymentlogs\BDD.log as requested. <![LOG[LTI Windows PE applied successfully]LOG]!><time="11:48:34.000+000" date="07-25-2012" component="LTIApply" context="" type="1" thread="" file="LTIApply"> <![LOG[LTIApply processing completed successfully.]LOG]!><time="11:48:34.000+000" date="07-25-2012" component="LTIApply" context="" type="1" thread="" file="LTIApply"> <![LOG[Microsoft Deployment Toolkit version: 6.0.2223.0]LOG]!><time="11:48:35.000+000" date="07-25-2012" component="ZTIDrivers" context="" type="1" thread="" file="ZTIDrivers"> <![LOG[The task sequencer log is located at C:\Users\nicy\AppData\Local\Temp\SMSTSLog\SMSTS.LOG. For task sequence failures, please consult this log.]LOG]!><time="11:48:35.000+000" date="07-25-2012" component="ZTIDrivers" context="" type="1" thread="" file="ZTIDrivers"> <![LOG[Processing drivers for an X86 operating system.]LOG]!><time="11:48:35.000+000" date="07-25-2012" component="ZTIDrivers" context="" type="1" thread="" file="ZTIDrivers"> <![LOG[TargetOS is the current SystemDrive]LOG]!><time="11:48:35.000+000" date="07-25-2012" component="ZTIDrivers" context="" type="1" thread="" file="ZTIDrivers"> <![LOG[Property DriverCleanup is now = DONE]LOG]!><time="11:48:35.000+000" date="07-25-2012" component="ZTIDrivers" context="" type="1" thread="" file="ZTIDrivers"> <![LOG[Compare Image processor Type with Original [X86] = [X86].]LOG]!><time="11:48:35.000+000" date="07-25-2012" component="ZTIDrivers" context="" type="1" thread="" file="ZTIDrivers"> <![LOG[Prepare machine for Sysprep.]LOG]!><time="11:48:35.000+000" date="07-25-2012" component="ZTIDrivers" context="" type="1" thread="" file="ZTIDrivers"> <![LOG[No driver actions can be taken for OS Images installed from *.wim files.]LOG]!><time="11:48:35.000+000" date="07-25-2012" component="ZTIDrivers" context="" type="1" thread="" file="ZTIDrivers"> <![LOG[ZTIDrivers processing completed successfully.]LOG]!><time="11:48:35.000+000" date="07-25-2012" component="ZTIDrivers" context="" type="1" thread="" file="ZTIDrivers"> <![LOG[Command completed, return code = -2147467259]LOG]!><time="11:48:35.000+000" date="07-25-2012" component="LiteTouch" context="" type="1" thread="" file="LiteTouch"> <![LOG[Litetouch deployment failed, Return Code = -2147467259 0x80004005]LOG]!><time="11:48:35.000+000" date="07-25-2012" component="LiteTouch" context="" type="3" thread="" file="LiteTouch"> <![LOG[For more information, consult the task sequencer log ...\SMSTS.LOG.]LOG]!><time="11:48:35.000+000" date="07-25-2012" component="LiteTouch" context="" type="1" thread="" file="LiteTouch"> <![LOG[Property RetVal is now = -2147467259]LOG]!><time="11:48:35.000+000" date="07-25-2012" component="LiteTouch" context="" type="1" thread="" file="LiteTouch"> <![LOG[Unable to copy log to the network as no SLShare value was specified.]LOG]!><time="11:48:35.000+000" date="07-25-2012" component="LiteTouch" context="" type="1" thread="" file="LiteTouch"> <![LOG[CleanStartItems Complete]LOG]!><time="11:48:35.000+000" date="07-25-2012" component="LiteTouch" context="" type="1" thread="" file="LiteTouch"> <![LOG[Unregistering TSCore.dll.]LOG]!><time="11:48:35.000+000" date="07-25-2012" component="LiteTouch" context="" type="1" thread="" file="LiteTouch"> <![LOG[About to run command: wscript.exe "\\server\deploymentshare$\Scripts\LTICleanup.wsf"]LOG]!><time="11:48:35.000+000" date="07-25-2012" component="LiteTouch" context="" type="1" thread="" file="LiteTouch"> <![LOG[Microsoft Deployment Toolkit version: 6.0.2223.0]LOG]!><time="11:48:36.000+000" date="07-25-2012" component="LTICleanup" context="" type="1" thread="" file="LTICleanup"> <![LOG[Removing AutoAdminLogon registry entries]LOG]!><time="11:48:36.000+000" date="07-25-2012" component="LTICleanup" context="" type="1" thread="" file="LTICleanup"> <![LOG[VSSMaxSize not specified using 5% of volume.]LOG]!><time="11:48:36.000+000" date="07-25-2012" component="LTICleanup" context="" type="1" thread="" file="LTICleanup"> <![LOG[Logs contained 7 errors and 0 warnings.]LOG]!><time="11:48:36.000+000" date="07-25-2012" component="LTICleanup" context="" type="1" thread="" file="LTICleanup"> <![LOG[Stripping BDD commands from unattend.xml template.]LOG]!><time="11:48:36.000+000" date="07-25-2012" component="LTICleanup" context="" type="1" thread="" file="LTICleanup"> <![LOG[Modified unattend.xml saved to C:\windows\panther\unattend.xml]LOG]!><time="11:48:36.000+000" date="07-25-2012" component="LTICleanup" context="" type="1" thread="" file="LTICleanup"> <![LOG[Checking mapped network drive.]LOG]!><time="11:48:36.000+000" date="07-25-2012" component="LTICleanup" context="" type="1" thread="" file="LTICleanup"> <![LOG[testing drive Z: mapped to \\server\deploymentshare$]LOG]!><time="11:48:36.000+000" date="07-25-2012" component="LTICleanup" context="" type="1" thread="" file="LTICleanup"> <![LOG[Disconnecting drive Z: mapped to \\server\deploymentshare$]LOG]!><time="11:48:36.000+000" date="07-25-2012" component="LTICleanup" context="" type="1" thread="" file="LTICleanup"> <![LOG[Cleaning up C:\MININT directory.]LOG]!><time="11:48:36.000+000" date="07-25-2012" component="LTICleanup" context="" type="1" thread="" file="LTICleanup"> <![LOG[Cleaning up TOOLS, SCRIPTS, and PACKAGES directories.]LOG]!><time="11:48:36.000+000" date="07-25-2012" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">

    Read the article

  • All paths down on vSphere esxi 5.1, LSI 9211-8i

    - by user1434058
    Works 100% ESXi 5.1 HBA (LSI 1064e) 1x SAS2 100GB SSD Doesn't work ESXi 5.1 HBA (LSI 9211-8i IT /IBM M1015) 1x SAS2 100GB SSD After a few hours of heavy HD load i get: - Device or filesystem with identifier ['all drives'] has entered the All Paths Down state. - ESXi retries but loses connectivity to the SAS drive, marks it as "dead or error" - reboot fixes the issue How can i fix this issue?

    Read the article

< Previous Page | 284 285 286 287 288 289 290 291 292 293 294 295  | Next Page >