Search Results

Search found 8970 results on 359 pages for 'out into space'.

Page 288/359 | < Previous Page | 284 285 286 287 288 289 290 291 292 293 294 295  | Next Page >

• Expanding raidz vdev

  - by Blubber

  I'm currently planning on installing FreeBSD 9 on my home server. The machine has 4x 1.5TB disks, and at some point, when HDD prices drop I'll be upgrading to something bigger, perhaps 3TB. The disks are connected to an IBM ServerRaid m1015 in IT mode, this card has room for up to eight disks. Now here is the problem, currently the 4x 1.5TB will be connected to the m1015. Then when prices drop I'll be adding something like 4x 3TB, also connected to the m1015. No problem yet, I can just run 2 raidz2 vdevs and put them in the same pool. But, at some point the 1.5TBs will start to break, or I will have to upgrade them when the pool runs out of space. So I started researching if it's possible to expand a raidz vdev, and I found several pages explaining the same procedure, like this on SF: How to upgrade a ZFS RAID-Z array to larger disks on OpenSolaris?. So I went a head and tried that in vmware, I installed FreeBSD 9 and created 6 virtual disks, 3 of 1GB each and 3 of 10GB each. After building a raidz vdev of the 1GBs I replaced them one by one with the 10GB, but the pool did not increase in size. Is this a limitation of the ZFS implementation in FreeBSD? Or am I just doing something wrong?

  Read the article

• DFS Root namespace is RDWR for all users

  - by Patrick

  We have an existing DFS Replication and Namespace group that we use to serve the company's files. This has been operating fine for us for some time now, and continues to do so. however a situation arose yesterday afternoon that has led us to be stumped. The problem is that we have our name space presented as : \\domain.co.uk\public\[8 or 9 folders that are mapped to the users in the business] We had a problem this morning that meant that a number of users started mapping their AD Home Drive directly to the \\domain.co.uk\public directory and we found that they had read/write. This rapidly became a problem as a at least one director saved some moderately sensitive documents in there and basically anyone could read them. I've tidied up that specific problem with some deft scripting and a slight modification of group policy. However I would like to make \public read only, the trouble is I can't work out where the ACLs for that folder would be held. All the folders that are presented as \\domain.co.uk\public\[folder] are 'real' folders on logical volumes on our DFS servers so are secured with groups that are applied via the 'security' tab. I'd like to do the same on \public but I can't find it. I have looked through amongst other things \Sysvol\domain.co.uk but can't find it and after a lot of clicking and a bit of reading I can't see how to lock it down. Any thoughts?

  Read the article

• Moving from 1 Linux Partition to Many over USB Mount

  - by Mistiry

  We have devices which use Compact Flash for storage. They work OK, but we recently got industrial-grade CF cards to start using. One of the major problems we get is corruption on the flash card. As it is now, these flash cards run Debian with everything in a single partition. We want to have multiple partitions on the new industrial CF cards to help avoid some of the corruption problems. I booted up the device, and attached a USB CF reader. I then used fdisk to partition the CF card in the USB reader. How can I move the data to these partitions so that it works? I have a partition for each of these directories: /lib /var /root /boot /tmp /home /etc / swap space I imagine I can't just use rsync - do I need to attach a second CF reader with a copy of the CF card, so that it's not active and in-use - and then copy from the first reader to the second? How will the system know where to find its files? I know I'd have to change fstab, but that resides in /etc, which will be on a separate partition...how will it find the fstab file if it can't find /etc? And what about grub? I'm at a loss, perhaps its just because I'm under the weather, or I'm just missing a piece of logic here... Any help is greatly appreciated, this is somewhat urgent as our existing stock is nearing its end and we don't want to purchase anything but these industrial cards, but need to get it working with partitions.

  Read the article

• What is the risk of introducing non standard image machines to a corporate environment

  - by Troy Hunt

  I’m after some feedback from those in the managed desktop or network security space on the risks of introducing machines that are not built on a standard desktop image into a large corporate environment. This particular context relates to the standard corporate image (32 bit Win XP) in a large multi-national not being suitable for a particular segment of users. In short, I’m looking at what hurdles we might come across by proposing the introduction of machines which are built and maintained by a handful of software developers and not based on the corporate desktop image (proposing 64 bit Win 7). I suspect the barriers are primarily around virus definition updates, the rollout of service packs and patches and the compatibility of existing applications with the newer OS. In terms of viruses and software updates, if machines were using common virus protection software with automated updates and using Windows Update for service packs and patches, is there still a viable risk to the corporate environment? For that matter, are large corporate environments normally vulnerable to the introduction of a machine not based on a standard image? I’m trying to get my head around how real the risk of infection and other adverse events are from machines being plugged into the network. There are multiple scenarios outside of just the example above where this might happen (i.e. a vendor plugging in a machine for internet access during a presentation). Would a large corporate network normally be sufficiently hardened against such innocuous activity? I appreciate the theory as to why policies such as standard desktop images exist, I’m just interested in the actual, practical risk and how much a network should be protected by means other than what is managed on individual PCs.

  Read the article

• Virtual Server HDD shrinks without apparent reason

  - by Christian

  We have a virtual hosted Linux server, and in the last few months every now and then the HDD shrinks from 400GB down to the exact byte count that is in use. All existing data can be downloaded and displayed without a problem, but we can't upload or edit any files because of the "full" hard drive. Here is a screenshot, where "size" should be 400GB: This has happened twice before, and again today. The last times, when I reported the issue to the host, they said "that isn't possible, you must be doing it wrong", but soon after the call, the problem vanished without us doing anything, so I suppose that they have some kind of problem they're not willing to admit. Even after the fact, they acted like nothing was wrong and wrote me a mail in which they explained that I can use "df -h" to view available disk space (well duh, how do you think I noticed this particular issue?). Questions about if and what they had done were ignored. It has happened around the 25th to 28th of the month, so I suspect that they might have a cronjob running every 30 days or so which wreaks havoc with some VM configs. I just want to understand the problem, but the host support hasn't been very helpful in that regard. I have tried Googling the issue, but any combination of search terms I can come up with just gives me tutorials on how to change HDD size in a virtual machine. a) What could be the cause of shrinking HDD size in a Ubuntu 12.04.3 LTS server? Could there be anything in our virtual machine or is it more likely to be an issue with the vm host? b) Can I do anything about it without needing to contact the host's support? c) Is there anyway I can prevent this from happening at all?

  Read the article

• Un-do Windows disk convert HFS+

  - by BLAKE

  Last night, a friend asked my to give him a copy of a word document. He handed me an external hard drive and left. I plugged the hard drive into my file server running Windows Server 2003, opened disk management and clicked OK. (I know that in Windows 2003 you need to manually assign a drive letter to external drives.) I then looked at the drive in disk management and it said that it was unallocated space. I called my friend and he said that there was data on the drive, but he used it with his Mac Book. Aperantly when I clicked OK in disk management I converted the from HFS+ file system to something else. Is there any way to undo the disk convert? I immediately removed the drive, so there was no writing to it. Windows did not format the drive, it just converted it. Is the data still there? All the data recovery programs I have are for windows, can they read the Mac file system? I need to get the data back, what can I do?

  Read the article

• Games on windows 8 in bootcamp lag even on lowest graphics

  - by Jackson Gariety

  I've been playing Crysis 2 and Skyrim on my Retina MacBookPro (10,1) for months now. The two games used to run super smoothly even on nearly maxed out settings. This laptop has an Nvidia GeForce GT 650M graphics card inside, it runs great. But I recently replaced my Windows 8 consumer preview with the retail copy, and since then, 3D games lag in this odd way, no matter what the graphics settings. Every second Skyrim and Crysis alternates between running smoothly and lagging. It's a cyclical lag that comes and goes like clockwork. I can turn the graphics down to 800x600 with no antialiasing and low texture quality, and it runs much smoother on the "up" motion of the cycle, but every second it moves back into this lag spike. I've tried installing beta graphics drivers, re installing the operating system, re installing the bootcamp support software, and freeing up space (I have about 20 GB free). I can't figure out what suddenly caused this other than some obscure difference between the consumer preview and the retail version. What can I try? Is my video card failing? Are there some other drivers I can install? This isn't normal lag from maxing out the card, it

  Read the article

• Are two periods allowed in the local-part of an email address?

  - by Mike B

  A third-party email gateway relay is refusing to process a message for an email address we're sending to. The address is in the format of [email protected] (note the two periods). Is this allowed by RFC guidelines? RFC 2822 seems to object to this in section 3.4.1: The locally interpreted string is either a quoted-string or a dot-atom. If the string can be represented as a dot-atom (that is, it contains no characters other than atext characters or "." surrounded by atext characters), then the dot-atom form SHOULD be used and the quoted-string form SHOULD NOT be used. Comments and folding white space SHOULD NOT be used around the "@" in the addr-spec. Furthermore, in that same section, it references this: addr-spec = local-part "@" domain local-part = dot-atom / quoted-string / obs-local-part I interpret this to mean that the localpart can have content separated by dots but there cannot be two successive dots, and it cannot start or end with a dot. That being said, I'm not familiar with dot-atom syntax so maybe I'm mistaken here. Can someone please confirm and explain?

  Read the article

• How to avoid duplicates when copying files that have been renamed at the destination

  - by Benoitt

  I have to get pictures from a folder – with subfolders which are updated automatically – with their extensions. These files have to be copied in a folder where a website based on PHP will edit them (by renaming and creating an XML file) to be downloadable and integrated in an XML feed. Because of the rename function of the script, when I perform the copy gain, all the files are duplicated, because the script has renamed the original ones already. I've tried a few things with rsync but I'm looking for something more powerful because I can't copy files with an external "history". #!/bin/bash find '/home/name/picture' -name '*.jpg' | while read FILE ; do rsync --backup --backup-dir=incremental --suffix=.old "$FILE" /var/www/media ; done wget --spider 'http://myscript.php' ; #exit 0 PS: As a little addition, I'd like to replace '.' with a 'space' just after the *.jpeg copy. My PHP script has some problem to define files with comma because of the extension. I'm finking about a command with find – like I did before – with a sed function? Is that a good idea?

  Read the article

• Issues with "There is already an object named 'xxx' in the database'

  - by Hoser

  I'm fairly new to SQL so this may be an easy mistake, but I haven't been able to find a solid solution anywhere else. Problem is whenever I try to use my temp table, it tells me it cannot be used because there is already an object with that name. I frequently try switching up the names, and sometimes it'll let me work with the table for a little while, but it never lasts for long. Am I dropping the table incorrectly? Also, I've had people suggest to just use a permanent table, but this database does not allow me to do that. create table #RandomTableName(NameOfObject varchar(50), NameOfCounter varchar(50), SampledValue decimal) select vPerformanceRule.ObjectName, vPerformanceRule.CounterName, Perf.vPerfRaw.SampleValue into #RandomTableName from vPerformanceRule, vPerformanceRuleInstance, Perf.vPerfRaw where (ObjectName like 'Processor' AND CounterName like '% Processor Time') OR(ObjectName like 'System' AND CounterName like 'Processor Queue Length') OR(ObjectName like 'Memory' AND CounterName like 'Pages/Sec') OR(ObjectName like 'Physical Disk' AND CounterName like 'Avg. Disk Queue Length') OR(ObjectName like 'Physical Disk' AND CounterName like 'Avg. Disk sec/Read') OR(ObjectName like 'Physical Disk' and CounterName like '% Disk Time') OR(ObjectName like 'Logical Disk' and CounterName like '% Free Space' AND SampleValue > 70 AND SampleValue < 100) order by ObjectName, SampleValue drop table #RandomTableName

  Read the article

• Ubuntu 12.04 VirtualBox on powerful W7 quite slow

  - by wnstnsmth

  I own a Thinkpad T420s with 8GB RAM, 160 GB SSD and a quite fast i7 processor. Summa summarum a very fast computer that works perfectly. Now, I am not very impressed by the performance of my Ubuntu 12.04 virtual machine running on VirtualBox 4.1.18. I assume that Virtual Machines are always a bit slower than the guest system, still I think it should be more performant given the hardware settings I give it: 4096 MB RAM 1 CPU without CPU limitation (I would like to give it more but then it does not seem to work - I am not experienced in this maybe somebody could give me advice on this too) Activated PAE/NX, VT-x/AMD-V and Nested Paging 96 MB Graphics Memory (no 2D or 3D acceleration) ~ 14 GB disk space, currently about 7 GB are used Maybe I misconfigured something, could you give me a hint please? Thanks! Edit: What I mean by slow is that for example switching tabs in the browser (whether FF or Chrome) only goes with a 0.5s delay or something, as well as switching application windows and/or double-clicking applications in the dock to get all open windows.. opening Aptana takes about a minute whereas opening something like Photoshop on the guest system takes 5 seconds

  Read the article

• Amazon EC2 - Free memory

  - by Damo

  We have an amazon ec2 small instance running and over the past few days we noticed that the memory is going down and down. On the small instance, we are running apache and tomcat6 Tomcat is started with the following JVM parameters -Xms32m -Xmx128m -XX:PermSize=128m -XX:MaxPermSize=256m We use nagios to monitor stuff like updates to apply, free disk space and memory. Everything else is behaving as expected but our memory is going down all the time. Our app receives approx half a million hits a day When I shutdown apache and tomcat, and ran free -m, we had only 594mb of memory free out out of the 1.7gb of memory. Not much else is running on the small instance and when running the top command I cannot see where the memory is going. The app we run on tomcat is a grails webapp. Could there be a possibility that there is a memory leak within our application? I read online and folks say that a small amazon instance is perfect for running apach and tomcat. I found a few posts online that showed how to setup apache and tomcat to limit the memory usage and I have already performed those steps. The memory is not being used up as quick but the memory is still decreasing over time. We have other amazone ec2 small instances running grails apps and the memory is fairly standard on those nodes. But they would not be receiving as much traffic Just to add, when I run the top command on the problem server, I cannot see where all the memory is being used Any help with this is greatly appreciated The output of free -m when run on my server is as follows total used free shared buffers cached Mem: 1657 1380 277 0 158 773 -/+ buffers/cache: 447 1209 Swap: 895 0 895 In your opinion, does this look ok? At what stage would the OS give back memory, would it wait to the memory reaches 0% or is this OS dependent?

  Read the article

• Apache 2 settings for high traffic website

  - by Harry

  I'm having problems with the load on my website. It's an amazon ec2 server with 15Gb ram and 4 CPUs behind an LB. apachetop says I'm getting around 80 reqs per second which seems really low for this kind of server and the load ( given by top ) is usually around 15 but does increase to about 150 in 24 hrs. I'm seeing about 100 active apache processes at any time. Apache is in prefork mode. Mysql is used very little on the server and there are almost no static files. Here are my Apache settings: Timeout 20 KeepAlive Off MaxKeepAliveRequests 0 KeepAliveTimeout 3 <IfModule mpm_prefork_module> StartServers 40 MinSpareServers 25 MaxSpareServers 40 ServerLimit 400 MaxClients 400 MaxRequestsPerChild 4 </IfModule> Can anyone advise on how to tweak the settings? Thanx! Edit: The config was gotten by trial and error. Any and I mean by a number, change to these lines make the load skyrocket in like 5 minutes. It literally jumps to like 200-300 in a matter of minutes. Especially MaxRequestsPerChild. I've tried with 10, 15, 100, 1000 and the load just skyrockets. About php - there are actually only a few php files which aren't really that expensive at all. They just spit some simple stuff out. If I turn on KeepAlive load also goes to space..

  Read the article

• Mac always boots with incorrect display gamma (for years now including Lion)

  - by Alex Wayne

  I think somewhere, something got installed but I have no idea what or how to fix it :( Basically, my old MacBook Pro running 10.5 Leopard had a problem where on boot it would show everything on the screen in a very sort of crunched color space. Everything below 15% white would just be pure black, everything above 85% white would be pure white and all colors look to be a touch more saturated. It's garish. To fix it, I found that I could boot into almost any fullscreen 3D game. When the game launches, the colors would still be off, but when I then quite the game and return the desktop everything is normal again. I've noticed Blizzard games work most reliably for this (World of Warcraft or Starcraft2). This problem has followed me through the years. When I upgraded to an iMac I migrated everything over to it, and the issue now happens on the iMac too. I then got a new MacBook Pro for work and migrated my iMac over to that, and it has the problem too. I had thought that it was an OS bug, but upgrading to 10.6 Snow Leopard didn't fix it and neither did 10.7 Lion. Furthermore I can't find any reference on any forum or help site where anyone else has this problem. If anyone has any idea what processes or settings or apps I should look at to figure out why this is happening I should would appreciate it! It looks sort of irresponsible when I open my laptop in the office to work and then boot up Starcraft 2 full screen...

  Read the article

• Multiple Screen - Keyboard Sharing

  - by nhbdesign

  I run a small architectural firm with several drafters employed, I'm currently setting up a new office space and one of the things on top of my list is a figuring out a way to keep tabs on my drafters work and being able to collaborate in real time. Here's the challenge, they sit in a separate large cubicle room and I'm on the other end of the hallway, the way it is now; every time they’ve got some question on how to proceed on a certain design, they would come all the way to my office, I'd open their file (in read only) give some ideas, save-as new file, they go back copy paste... in short, nonsense. What I've been thinking of is to setup a hardwired solution that should enable me to have an extra monitor on my desktop which is hardwired (through KVM or something) to each of my employees workstations serving as a secondary display, so that I can watch live what they do, interact with them just as if they would have an extra keyboard and monitor in my office, except; I don’t want to have on my desk a separate monitor for each employee.. so I'd want them to be tiled on a single large screen, watching all screens alive, and whenever they ask me (or I just decide..) to step in, I just click on any tile and hurray, I'm in, editing and saving in real time on their workstation. I also want to reserve the option when I want to, to just use that monitor as just an extra screen for my workstation. Is something like that possible in 2013? P.S. I know of TeamViewer and similar internet/software based stuff, but I'm specifically looking for something solid hardwired and maintenance free, and also something that would allow to watch without my employees getting notified every time I do so (I’m not a tough boss though...).

  Read the article

• What are secure ways of sharing a server (ssh+LAMP) with friends?

  - by Bran the Blessed

  What is the best way to share a virtual server with friends? More precisely, I have the following assets: A virtual private server (Debian Lenny) with root access for myself, running... SSH apache2 mysql Some unused disk space Some friends in need of hosting The problem I would now like to do the following: Hosting one or several domains per friend My friends should have full access to their domains, including running PHP scripts, for example My friends should not be able to poke around in other directories The security of my server should not be compromised by faulty PHP scripts To clarify: I do trust my friends in the sense that they are not trying to do something evil with their access. I just do not trust the programs they are going to run. So, what are your recommendations for establishing such a scenario? Partial solution I already came up with the following plan: Add chrooted SSH users for my friends Add Apache vhosts per user (point the directories to subdirectories of the homedirectories, i.e. /home/alice/example.com, /home/bob/example.net, etc. But how can I enforce a chroot-like environment for the scripts they are running within these vhosts? Any pointers would be appreciated.

  Read the article

• Dual Monitor + Virtual Desktop software (plus for cube)

  - by xenithorb

  I've recently purchased another monitor, my first one being a TV and being much larger. I now sit at a desk and use my shiny new 24" LED more often, but I like to extend the desktop into the TV. The problem presented with this is to save power and the longevity of my 47" VIZIO, I try to keep it off when possible. What I'm seeking sounds very simple - If any of you have ever used Compiz or Deskspace (Yod'm) - You'll know what im referring to when I talk about a "cube." The most important functionality I'm looking for is the ability to scroll desktop contents between both displays and virtual desktops. Deskspace does and excellent job of presenting an attractive cube, but it creates a separate cube and virtual desktop space for the second extended monitor (now the TV) - Again, what I'm looking to do is scroll between virtual desktops, by passing through both monitors. The net effect of this functionality would allow me to scroll the contents of the extended monitor to the first monitor should a window get caught there without having to turn on the TV. So imagine the horizontal portion of a cube as being actual real monitors - is there anything that allows one to rotate desktops between displays?

  Read the article

• 1 PC, 2 consoles (as in 2 monitors, keyboards and mice)

  - by ciuly

  I have this desire to "kill 2 birds with one shot". Currently, I have 1 server running round the clock, 1 laptop that runs about 8 hours a day, 7 days a week, and a desktop that runs about the same length of time. All 3 are ... old, to say the least. So there is a great need to upgrade (well, the server might handle its job for another year or so, but that only depends on how much time I have to put it to "work"). Now, I'm "dreaming" of only one PC. I'm thinking vmware's ESX. So there will be a VM for the server, a VM for the "laptop" and one for the "desktop". And obviously I'll have to somehow "link" a set of monitor/keyboard/mouse with one of the laptop/desktop VMs. The server doesn't need such things, obviously (it doesn't have them at this moment either). Is something like this possible? ESX is not a requirement, it's just something I found that answers part of my problems, but there still remains the 2 KVM set that needs connecting and "linking" to appropriate VM. Why I would want to do this? well, first of all, it's much cheaper to upgrade one PC than 3. Then, the power consumption is obviously lower. Plus the extra space.Plus it allows me to better separate networks and services. Thanks.

  Read the article

• Minecraft server hosting hardware specifications [on hold]

  - by Andrew Wright

  I am planning on purchasing a server to rent off Minecraft game servers, largely to friends. I am planning on purchasing a 128GB RAM server to save on colocation costs (as I am likely to need more than 32GB and would have to rent 2U of space...) I am hoping for some advice about the processing power needed to deal with this level of RAM. The servers will be run in a shared environment on linux in a VM to make backups easier. The server I have in mind is dual CPU. I have been considering at the low end dual Xeon E5-2609V2 Quad-Core 2.5Ghz, and at the high end dual Xeon E5-2650V2 Eight-Core 2.6Ghz. The difference between these is 6.4 GT/s and 8 GT/s and £3000 for the lower spec server, £4300 for the higher spec. I was hoping I could get advice about whether it is worth paying for the extra/higher speed processor or if I would be wasting my money? Thank you for any help - I appreciate that this is not directly related to professional system administration.

  Read the article

• Fedora Core 6 Migration

  - by Matthew Sprankle

  I am at a loss as to what I should to for this server. I need it to run php5.3 and corresponding version of mysql. I received a client today through work that is using Fedora core 6 running 10 very small websites on some very hodge podge setup. My original idea was just upgrade to php5.3. I have yum (installed 3.0.8) reconfigured for the fedora archive. The latest version of php it allows is 5.1.8. I am still relatively new to server setups and am nervous about wiping their server to upgrade it. Since it is about 6-8 years old I'm not sure if it will even support the newest version of fedora. The server specs are: Parallels Plesk Panel version 9.5.4 Operating system Linux 2.6.9-023stab048.4-smp CPU GenuineIntel, Intel(R) Xeon(R)CPU E5335 @ 2.00GHz (10gb disk space and 1gb of memory). I use fedora for my personal server so I was a little familiar with it. I haven't done anything too extravagant. Is there a way I can escape this nightmare with installing php5.3 or do I need to migrate these sites to a new server?

  Read the article

• FDE / SSD - partition and leave some unencrypted?

  - by Web Design Hero

  Just bought a used beast of a desktop pc. The system drive is setup as a Raid 0 SSD (Intel 510 SSD Drives) with 128 each. I will probably not have to many programs beyond office and maybe Adobe CS if I spring for it, I will be keeping big data on a regular hdd. My question is about setting up TrueCrypt with my configuration. I have not previously done full disk encryption, but I feel that its probably a good idea. I have done some speed tests using file containers on the hdd and the sdd with truecrypt. While there is a huge hit with the SSDs and Truecrypt, it still outperforms the hdd on its own by a good margin, so I think i will be okay for my needs with truecrypt. I have seen in a few places that they recommend partitioning the drive and leavign some of the SSD not inside truecrypt, does this really make a difference? If so, how much should I leave? Will there be any issue in the Raid0 configuration? I am not really concerned about all the wear leveling issue, rather loose data and be secure, but since I don't need all that space neccesarily, I would like to optimize my setup for security and speed.

  Read the article

• How to reduce memory consumption an AWS EC2 t1.micro instance (free tier) ubuntu server 14.04 LTS EBS

  - by CMPSoares

  Hi I'm working on my bachelor thesis and for that I need to host a node.js web application on AWS, in order to avoid costs I'm using a t1.micro instance with 30GB disk space (from what I know it's the maximum I get in the free tier) which is barely used. But instead I have problems with memory consumption, it's using all of it. I tried the approach of creating a virtual swap area as mentioned at Why don't EC2 ubuntu images have swap? with these commands: sudo dd if=/dev/zero of=/var/swapfile bs=1M count=2048 && sudo chmod 600 /var/swapfile && sudo mkswap /var/swapfile && echo /var/swapfile none swap defaults 0 0 | sudo tee -a /etc/fstab && sudo swapon -a But this swap area isn't used somehow. Is something missing in this approach or is there another process of reducing the memory consumption in these type of AWS instances? Bottom-line: This originates server freezes and crashes and that's what I want to stop either by using the swap, reducing memory usage or both.

  Read the article

• Concatenating gziped Apache logs

  - by markdrayton

  We rotate and compress our Apache logs each day but it's become apparent that this isn't frequently enough. An uncompressed log is about 6G, which is getting close to filling our log partition (yep, we'll make it bigger in the future!) as well as taking a lot of time and CPU to compress each day. We have to produce a gziped log for each day for our stats processing. Obviously we could move our logs to a partition with more space but I also want to spread the compression overhead throughout the day. Using Apache's rotatelogs we can rotate and compress the log more often -- hourly, say -- but how can I concatenate all the hourly compressed logs into a running compressed log for the day, without decompressing the previous logs? I don't want to uncompress 24 hours' worth of data and recompress it because that has all the disadvantages of our current solution. Gzip doesn't seem to offer any append or concatenate option but perhaps I've missed something obvious. This question suggests straight shell concatenation "works" in that the archive can be decompressed but that gzip -l doesn't work seems a bit dodgy. Alternatively, perhaps this is still a bad way to do things. Other suggestions are welcome -- our only constraints are our relatively small log partitions and the need to provide a daily compressed log.

  Read the article

• 1 PC, 2 consoles (as in 2 monitors, keyboards and mice)

  - by ciuly

  I have this desire to "kill 2 birds with one shot". Currently, I have 1 server running round the clock, 1 laptop that runs about 8 hours a day, 7 days a week, and a desktop that runs about the same length of time. All 3 are ... old, to say the least. So there is a great need to upgrade (well, the server might handle its job for another year or so, but that only depends on how much time I have to put it to "work"). Now, I'm "dreaming" of only one PC. I'm thinking vmware's ESX. So there will be a VM for the server, a VM for the "laptop" and one for the "desktop". And obviously I'll have to somehow "link" a set of monitor/keyboard/mouse with one of the laptop/desktop VMs. The server doesn't need such things, obviously (it doesn't have them at this moment either). Is something like this possible? ESX is not a requirement, it's just something I found that answers part of my problems, but there still remains the 2 KVM set that needs connecting and "linking" to appropriate VM. Why I would want to do this? well, first of all, it's much cheaper to upgrade one PC than 3. Then, the power consumption is obviously lower. Plus the extra space.Plus it allows me to better separate networks and services. Thanks.

  Read the article

• Is it possible to use different zsh menu selection behaviour for different commands?

  - by kine

  I'm using the menu select behaviour in zsh, which invokes a menu below the cursor where you can see the various possibilities. The .zshrc option i have set for this is zstyle ':completion:*' menu select=2 By default, pressing Return to select a possibility in this menu only completes the word — it does not actually send the command. For example, I might get a menu like this ~ % cd de<TAB> completing directory: [Desktop/] Development/ Pressing Return here will result in ~ % cd Desktop/ I then have to press Return a second time to actually send the command. I can modify this behaviour to make it so that pressing Return both selects the completion and sends the command by doing this bindkey -M menuselect '^M' .accept-line However, there's a problem with this: sometimes I need to complete a file or directory without sending the command. For example, I might need to do ln -s Desktop Desktop2 — with this bindkey behaviour, trying to complete Desktop will result in ln -s Desktop/ being sent as the command, and obviously I don't want that. I'm aware that just pressing space will let me get on with the command, but it's now a habit. Given this, is there a way to make it so that only some commands let you press Return once (like cd), but all other commands require pressing it twice?

  Read the article

< Previous Page | 284 285 286 287 288 289 290 291 292 293 294 295  | Next Page >