Search Results

Search found 41497 results on 1660 pages for 'fault'.

Page 290/1660 | < Previous Page | 286 287 288 289 290 291 292 293 294 295 296 297  | Next Page >

• correct way to prevent SPF failures

  - by Sean Kimball

  I have a website on a hosted server whose mail users are using their ISPs SMTP to send mail. I have set their SPF record to look like this: v=spf1 mx a:comcast.net ip4:216.70.103.0/24 ip4:216.70.101.0/24 ip4:76.96.53.0/24 -all the SMTP host is comcast.net, 76.96.53.0/24 is the ip range they get assigned from. ip4:216.70.103.0/24 ip4:216.70.101.0/24 are the two possible SMTP ranges they could get IF they used their hosting account mail servers [media temple] They are still getting SPF errors, any idea why?

  Read the article

• How to mount vfat drive on Linux with ownership other than root?

  - by Norman Ramsey

  I'm running into trouble mounting an iPod on a newly upgraded Debian Squeeze. I suspect either a protocol has changed or I've tickled a bug, which I don't know where to report. I'm trying to mount the iPod so that I have permission to read and write it. But my efforts come to nothing: $ sudo mount -v -t vfat -o uid=32074,gid=6202 /dev/sde2 /mnt /dev/sde2 on /mnt type vfat (rw,uid=32074,gid=6202) $ ls -l /mnt total 80 drwxr-xr-x 2 root root 16384 Jan 1 2000 Calendars drwxr-xr-x 2 root root 16384 Jan 1 2000 Contacts drwxr-xr-x 2 root root 16384 Jan 1 2000 Notes drwxr-xr-x 3 root root 16384 Jun 23 2007 Photos drwxr-xr-x 6 root root 16384 Jun 19 2007 iPod_Control $ sudo umount /mnt $ sudo mount -v -t vfat -o uid=nr,gid=nr /dev/sde2 /mnt /dev/sde2 on /mnt type vfat (rw,uid=32074,gid=6202) $ ls -l /mnt total 80 drwxr-xr-x 2 root root 16384 Jan 1 2000 Calendars drwxr-xr-x 2 root root 16384 Jan 1 2000 Contacts drwxr-xr-x 2 root root 16384 Jan 1 2000 Notes drwxr-xr-x 3 root root 16384 Jun 23 2007 Photos drwxr-xr-x 6 root root 16384 Jun 19 2007 iPod_Control As you see, I've tried both symbolic and numberic IDs, but the files persist in being owned by root (and only writable by root). The IDs are really mine; I've had the UID since 1993. $ id uid=32074(nr) gid=6202(nr) groups=6202(nr),0(root),2(bin),4(adm),... I've put an strace at http://pastebin.com/Xue2u9FZ, and the mount(2) call looks good: mount("/dev/sde2", "/mnt", "vfat", MS_MGC_VAL, "uid=32074,gid=6202") = 0 Finally, here's my kernel version from uname -a: Linux homedog 2.6.32-5-686 #1 SMP Mon Jun 13 04:13:06 UTC 2011 i686 GNU/Linux Does anyone know if I should be doing something different, or If there is a workaround, or If this is a bug, where it should be reported?

  Read the article

• Failover tmpfs mirroring. Am I doing it right?

  - by user45286

  My goal is to have a certain directory to be available as tmpfs. There will be some modifications during server uptime in this dir and those modifications must be synced to non-tmpfs persistent dir on HDD over rsync. After server boot the latest version from non-tmpfs persistent dir must be moved to tmpfs and rsync syncing to be started. I'm afraid that rsync will erase non-tmpfs backup if tmpfs dir will be empty.. I'm doing it in this way right now: create tmpfs partition in /etc/fstab cat /etc/rc.local (pseudocode) delete "tmpfs rsync" cronjob from /var/spool/cron/crontabs if there is any cp -r /path/to/non-tmpfs-backup /path/to/tmpfs/dir append /var/spool/cron/crontabs with "tmpfs rsync" cronjob What do you think?

  Read the article

• How do I protect a low budget network from rogue DHCP servers?

  - by Kenned

  I am helping a friend manage a shared internet connection in an apartment buildling with 80 apartments - 8 stairways with 10 apartments in each. The network is laid out with the internet router at one end of the building, connected to a cheap non-managed 16 port switch in the first stairway where the first 10 apartments are also connected. One port is connected to another 16 port cheapo switch in the next stairway, where those 10 apartments are connected, and so forth. Sort of a daisy chain of switches, with 10 apartments as spokes on each "daisy". The building is a U-shape, approximately 50 x 50 meters, 20 meters high - so from the router to the farthest apartment it’s probably around 200 meters including up-and-down stairways. We have a fair bit of problems with people hooking up wifi-routers the wrong way, creating rogue DHCP servers which interrupt large groups of the users and we wish to solve this problem by making the network smarter (instead of doing a physical unplugging binary search). With my limited networking skills, I see two ways - DHCP-snooping or splitting the entire network into separate VLANS for each apartment. Separate VLANS gives each apartment their own private connection to the router, while DHCP snooping will still allow LAN gaming and file sharing. Will DHCP snooping work with this kind of network topology, or does that rely on the network being in a proper hub-and-spoke-configuration? I am not sure if there are different levels of DHCP snooping - say like expensive Cisco switches will do anything, but inexpensive ones like TP-Link, D-Link or Netgear will only do it in certain topologies? And will basic VLAN support be good enough for this topology? I guess even cheap managed switches can tag traffic from each port with it’s own VLAN tag, but when the next switch in the daisy chain receives the packet on it’s “downlink” port, wouldn’t it strip or replace the VLAN tag with it’s own trunk-tag (or whatever the name is for the backbone traffic). Money is tight, and I don’t think we can afford professional grade Cisco (I have been campaigning for this for years), so I’d love some advice on which solution has the best support on low-end network equipment and if there are some specific models that are recommended? For instance low-end HP switches or even budget brands like TP-Link, D-Link etc. If I have overlooked another way to solve this problem it is due to my lack of knowledge. :)

  Read the article

• Detecting upload success/failure in a scripted command-line SFTP session?

  - by Will Martin

  I am writing a BASH shell script to upload all the files in a directory to a remote server and then delete them. It'll run every few hours via a CRON job. My complete script is below. The basic problem is that the part that's supposed to figure out whether the file uploaded successfully or not doesn't work. The SFTP command's exit status is always "0" regardless of whether the upload actually succeeded or not. How can I figure out whether a file uploaded correctly or not so that I can know whether to delete it or let it be? #!/bin/bash # First, save the folder path containing the files. FILES=/home/bob/theses/* # Initialize a blank variable to hold messages. MESSAGES="" ERRORS="" # These are for notifications of file totals. COUNT=0 ERRORCOUNT=0 # Loop through the files. for f in $FILES do # Get the base filename BASE=`basename $f` # Build the SFTP command. Note space in folder name. CMD='cd "Destination Folder"\n' CMD="${CMD}put ${f}\nquit\n" # Execute it. echo -e $CMD | sftp -oIdentityFile /home/bob/.ssh/id_rsa [email protected] # On success, make a note, then delete the local copy of the file. if [ $? == "0" ]; then MESSAGES="${MESSAGES}\tNew file: ${BASE}\n" (( COUNT=$COUNT+1 )) # Next line commented out for ease of testing #rm $f fi # On failure, add an error message. if [ $? != "0" ]; then ERRORS="${ERRORS}\tFailed to upload file ${BASE}\n" (( ERRORCOUNT=$ERRORCOUNT+1 )) fi done SUBJECT="New Theses" BODY="There were ${COUNT} files and ${ERRORCOUNT} errors in the latest batch.\n\n" if [ "$MESSAGES" != "" ]; then BODY="${BODY}New files:\n\n${MESSAGES}\n\n" fi if [ "$ERRORS" != "" ]; then BODY="${BODY}Problem files:\n\n${ERRORS}" fi # Send a notification. echo -e $BODY | mail -s $SUBJECT [email protected] Due to some operational considerations that make my head hurt, I cannot use SCP. The remote server is using WinSSHD on windows, and does not have EXEC privileges, so any SCP commands fail with the message "Exec request failed on channel 0". The uploading therefore has to be done via the interactive SFTP command.

  Read the article

• Windows 2008 terminal server - How to restrict access to DVD/floppy?

  - by test1839

  I has a very simple task. I need to block access to removable media (CD, DVD, floppy, USB drives etc.) on a Windows 2008 R2 Terminal Server for users and allow it for admins. I tried to enable the following policy in GPO: User Configuration/Administrative Templates/System/Removable Storage Access All Removable Storage classes: Deny all access = Enabled But it did not work. I tried different physical and virtual 2008 servers with the same result. It works on Windows 7 but not on Windows 2008. Has anyone had success with this parameter on Windows 2008? Thank you

  Read the article

• sftp to cygwin cmd fails with "received message too long"

  - by ana

  I have a windows server running cygwin, where open-ssh is set up. I am able to ssh into the server fine. I need to run a script that I cannot amend, and which needs to copy files via sftp, and requires the shell to be cmd. However, it fails with the message "received message too long" because when cmd starts it displays the Windows banner, and sftp chokes on this. I can't find any way to disable the banner, or redirect the output, or in any way get around this problem. Does anyone know how I can fix this?

  Read the article

• Block Google requests to 16k using pf firewall

  - by atmosx

  I'd like to block access to Google search using PF after the threshold of 17500 requests (connection established) in 24h, from a host running FreeBSD 9. What I came up with, after reading pf-faq is this rule: pass out on $net proto tcp from any to 'www.google.com' port www flags S/SA keep state (max-src-conn 200, max-src-conn-rate 17500/86400) NOTE: 86400 are 24h in seconds. The rule should work, but PF is smart enough to know that www.google.com resolves in 5 different IPs. So my pfctl -sr output gives me this: pass out on vte0 inet proto tcp from any to 173.194.44.81 port = http flags S/SA keep state (source-track rule, max-src-conn 200, max-src-conn-rate 17500/86400, src.track 86400) pass out on vte0 inet proto tcp from any to 173.194.44.82 port = http flags S/SA keep state (source-track rule, max-src-conn 200, max-src-conn-rate 17500/86400, src.track 86400) pass out on vte0 inet proto tcp from any to 173.194.44.83 port = http flags S/SA keep state (source-track rule, max-src-conn 200, max-src-conn-rate 17500/86400, src.track 86400) pass out on vte0 inet proto tcp from any to 173.194.44.80 port = http flags S/SA keep state (source-track rule, max-src-conn 200, max-src-conn-rate 17500/86400, src.track 86400) pass out on vte0 inet proto tcp from any to 173.194.44.84 port = http flags S/SA keep state (source-track rule, max-src-conn 200, max-src-conn-rate 17500/86400, src.track 86400) PF creates 5 different rules, 1 for each IP that Google resolves. However I have the sense - without being 100% sure, I didn't had the chance to test it - that the number 17500/86400 applies for each IP. If that's the case - please confirm - then it's not what I want. In pf-faq there's another option called source-track-global: source-track This option enables the tracking of number of states created per source IP address. This option has two formats: + source-track rule - The maximum number of states created by this rule is limited by the rule's max-src-nodes and max-src-states options. Only state entries created by this particular rule count toward the rule's limits. + source-track global - The number of states created by all rules that use this option is limited. Each rule can specify different max-src-nodes and max-src-states options, however state entries created by any participating rule count towards each individual rule's limits. The total number of source IP addresses tracked globally can be controlled via the src-nodes runtime option. I tried to apply source-track-global in the above rule without success. How can I use this option in order to achieve my goal? Any thoughts or comments are more than welcome since I'm an amateur and don't fully understand PF yet. Thanks

  Read the article

• how to enable remote access to a MySQL server on an AZURE virtual machine

  - by Rees

  I have an AZURE virtual machine with a MySQL server installed on it running ubuntu 13.04. I am trying to remote connect to the MySQL server however get the simple error "Can't connect to MySQL server on {IP}" I have already done the follow: * commented out the bind-address within the /etc/mysql/my.cnf * commented out skip-external-locking within the same my.cnf * "ufw allow mysql" * "iptables -A INPUT -i eth0 -p tcp -m tcp --dport 3306 -j ACCEPT" * setup an AZURE endpoint for mysql * "sudo netstat -lpn | grep 3306" does indeed show mysql LISTENING * "GRANT ALL ON *.* TO remote@'%' IDENTIFIED BY 'password'; * "GRANT ALL ON *.* TO remote@'localhost' IDENTIFIED BY 'password'; * "/etc/init.d/mysql restart" * I can connect via SSH tunneling, but not without it * I have spun up an identical ubuntu 13.04 server on rackspace and SUCCESSFULLY connected using the same procedures outlined here. NONE of the above works on my azure server however. I thought the creation of an endpoint would work, but no luck. Any help please? Is there something I'm missing entirely?

  Read the article

• What are the implications of expanding an internal subnet mask?

  - by Philip

  Our network is currently working on a 192.168.0.x subnet, all controlled through DHCP, except for the few main servers who have hard-configured IP address settings. What would I kill if I changed the DHCP-published subnet mask from 255.255.255.0 to 255.255.0.0? The reason for doing this is not because we have a huge sudden influx of machines, but because I'd like to start partitioning specific devices into specific IP ranges (to be neat and tidy). For what its worth, I don' plan on changing the allocated DHCP address range, but rather want to move some of the reserved and excluded DHCP addresses out of the address pool. e.g. printers will be 192.168.2.x I will obviously need to change the subnet mask manually on my manually configured devices.

  Read the article

• Routing WIFI and LAN for specific traffic

  - by jakebird451

  I have two network devices aboard my macbook pro: WIFI (en1): Used for general traffic. Connects to an ip of 192.168.19.* via DHCP LAN (en0): Used for specific traffic. Connects to an ip of 192.168.2.10 as a static IP. Does not connect to a router, only a switch for direct routing connection. I have 4 IP addresses I need to access on the LAN: 192.168.2.1 192.168.2.21 192.168.2.20 192.168.2.30 The rest of the traffic needs to go to WIFI. I have tried setting up a routing table for the specific ip addresses, but I only managed to mess up my network. I do not venture out into the world of networking too often, but this was the latest command I have been trying: sudo route add -host 192.168.2.30 -interface en0 This command killed my ability to use ping. It told me that ping could not allocate memory (is that even possible)? It also killed my wifi access. Logging out and back in fixed the issue. I really do not mind to make this solution permanent, so I am fine with a temporary routing. EDIT: If I currently have been trying: sudo route flush sudo route add default 192.168.19.1 This gets everything to work for about a minute. But after such minute it "forgets" the routing to WiFi while retaining LAN's (en0) routing. If I unplug and replug my LAN (en0) cable, the process works for another minute.

  Read the article

• Allow multiple remote desktop connections from same user

  - by Shaharyar

  Hello everybody We're just setting up a brand new Server 2008 R2 with Remote Desktop services. Everything is installed fine so far, we have set it up with 5 CALs per User (not Machine!) and they are activated and running. The problem / question here is: Is it possible to log in with the same user multiple times? This worked perfectly fine in Windows Server 2003 We just want it to start a new session on the server with the same user. Has anyone of you got experience in that? Thanks!

  Read the article

• Server 2008 Hard Faults

  - by claw

  Hey all, plase bear with me as I haven't looked at a server in a very long time. The problem I am having is with a Windows 2008 Standard FE Service Pack 2 Intel Xeon X3430 @ 2.40 2.39 GHZ 4 GB Memory 64 Bit There seems to be no problems other than the physical memory peaking at 91%, always with over 100 Hard Faults Per Second. To my understanding hard faults should be fairly rare on a machine with. Are there any logs I can show you? Or investigate myself. The general performance of the machine is ok, i can access SBS2008 and change settings fairly smoothly without hangs etc. However, we connect to the server and do quite a bit of SQL via an application. For a record to retrieve say 20 rows, it can take 20+ seconds. Thanks in advance, Jamie EDIT: What the server is used for: IIS ASP Web Service SQL 2008 List item Exchange unable to upload screenshots due to low reputation - why doesnt my SO work here :)

  Read the article

• Unable to connect SQL Server instance from Visual Studio 2008 SP1 on Vista x64

  - by Shimmy

  Hi folks! I installed on a Vista x64 machine Visual Studio 2008 SP1 (with integrated SQL from the installation package) and when I try to add an MDF file to a project or to the App_Data when working with web, I get the following message: Connections to SQL Server Files (*.mdf) require SQL Server Express 2005 to function properly. Please verify the installation of the component or download from the URl: http:go.microsoft.com/fwlink/?linkID=49251. Just to make sure: SQL 2005 express is installed and I connect to it via SSMS. Update: I am 90% sure that this is a Microsoft bug with x64 machines.

  Read the article

• Copy Office files from a Mac to a PC

  - by Martin

  A friend of me recently dumped his Mac fpr a PC. He used Microsoft Office for Mac and has several hundred Files (Word, Excel) which were copied over to the new PC using a USB disk. Microsoft Office is now unable to read any of there files. I suspect this is because of little endian vs. big endian. Is there any tool which can converted all theses files automatically, doing this by hand would take ages.

  Read the article

• What files to backup on Lighttpd+MySQL+PHP server

  - by Tomaszs

  I have a VPS with CentOS 5. I would like to create backup of: all my config files tweaks of database, php, server a databases cron settings website files installed applications and their settings (?) What files should i take into account? I don't want to miss any file that will be necessary to restore fast my webserver in case of any failure. And I don't want to create whole backup because entire VPS has like 30 GB of data.

  Read the article

• windows server 2008r2 with terminal services in multiple networks with different users

  - by phhe

  is there a way to let terminal services make some kind of 'abstraction' over the physical network interfaces of the server so they can be managed via gpo to grant or prohibit access for different users? the basic idea is to have 2 network interfaces (user and server/management) and not letting users within terminal sessions access the server/management network. or is this just impossible ? what would be a better way to do this ?

  Read the article

• SQL log shipping for reporting

  - by Patrick J Collins

  I would like to create a read-only copy of my SQL Server 2008 database on a secondary server for reporting and analysis. I've been testing log shipping, configured to run every 5 minutes or so. Alas, there appears to be a stumbling block, for exclusive access is required on the target database during the restore, which in turn requires killing all active connections. This is far from ideal, especially if a user is in the middle of running a report. Any better suggestions? Edit : I'm doing this on the Express edition.

  Read the article

• Best way to replicate / mirror 100s of databases in SQL 2005

  - by mrwayne

  Hi, I currently host around 400-500 SQL 2005 databases of varying sizes (1-10 gig) each. I am aware of most of the different methods available and the general pros/cons of mirroring, log shipping, replication and clustering, but i am not aware of how well they tend to perform when its employed at the size i have specified (400-500 unique databases). Does anyone have any good advice on what is likely the best method for having the ability to fail over to another server with this sort of setup? Fail over does not need to be immediate, i'm just looking for something better than taking backups every day and moving them to storage. I'm preferably looking for something that would also makes it easy to manage the databases in bulk (as opposed to one at a time). Thanks for your input!

  Read the article

• Tools for load-testing HTTP servers?

  - by David Wolever

  I've had to load test HTTP servers/web applications a few times, and each time I've been underwhelmed by the quality of tools I've been able to find. So, when you're load testing a HTTP server, what tools do you use? And what are the things I'll most likely do wrong the next time I've got to do it?

  Read the article

• 1000Base-X layer 2/MAC address details

  - by user69971

  A layer 2 Ethernet frame is sent with a source and destination MAC address. Given a 100Base-TX (copper) trunk between two Cisco switches, I can do a "show interface fa 0/0" on S1 to see the MAC address assigned to the trunking interface, then go to Switch2 and do a "show mac address-table" and find the MAC address of the S1 fa 0/0 interface as a dynamically learned MAC in the table. Given a similar setup with a 1000Base-X (fiber GBIC) trunk, the MAC address shown in "show interface gi 0/0" on S1 does not show up in the MAC address-table of S2. Everything I can find online indicates that 1000Base-X uses largely the same layer 2 format as copper connections. There's some slight alterations - minimum frame size is slightly larger - but the fundamentals of the frame structure appear to be the same, including transmission with a source and destination L2 address. Why doesn't the address of gi 0/0 show up in the MAC address table of the connection switch? The only thing which seems to make sense would be that the GBIC has its own MAC address, almost as if its acting as a mini 2-port switch or hub, with the switch-assigned MAC address showing up on the interface connection and a different MAC address assigned to the fiber side. If this is the case, is there any way to see the GBIC MAC address on the switch? (I've tried to look up the details in IEEE 802.3z but it doesn't seem to be available without an IEEE membership or purchasing the standard. I find the base 802.3 PDFs for download, but not 802.3z.)

  Read the article

• Using the option port on my Watchguard Firebox as a 2nd gateway exit point?

  - by Donovan

  I'm working on a network project in witch I have to design our network to provide two different exit points. The points are differentiated by the path through the corporate network. One of them travels through some monitoring hardware the other does not. We have a Watchguard Firebox in use as our gateway. Currently the network side provides the unmonitored exit point. I was wondering if i hooked the option port to our lan at a point that would force traffic through the monitored path, would it cause any problems? Access to the unmonitored gateway port would be restricted by ip. That would force all others not authorized to point to the monitored gateway port. I thought with the above design i might be able to get away with not having to buy another firebox to achieve the design I want. Thanks, D

  Read the article

• Sendmail Sends but never Delivers

  - by Jeremy

  I have tried 10 different emails hosted at Google, Yahoo!, GoDaddy, and some that are privately hosted, and each time I get the following errors. I have blocked sensitive information, but you will be able to see the errors. Feb 16 17:06:50 xxxxx sendmail[31824]: o1GM6ovJ031824: [email protected], ctladdr=www-data (33/33), delay=00:00:00, xdelay=00:00:00, mailer=relay, pri=30054, relay=[127.0.0.1] [127.0.0.1], dsn=2.0.0, stat=Sent (o1GM6oJo031825 Message accepted for delivery) Feb 16 16:54:19 xxxxx sendmail[31625]: o1GLsJPP031625: [email protected], ctladdr=www-data (33/33), delay=00:00:00, xdelay=00:00:00, mailer=relay, pri=30097, relay=[127.0.0.1] [127.0.0.1], dsn=2.0.0, stat=Sent (o1GLsJah031626 Message accepted for delivery) Feb 17 09:05:52 xxxxx sm-mta[10620]: o1H6Z3jM005734: to=<[email protected]>, ctladdr=<[email protected]> (33/33), delay=07:30:49, xdelay=01:15:36, mailer=esmtp, pri=571331, relay=aspmx3.googlemail.com. [209.85.222.4], dsn=4.0.0, stat=Deferred: Connection timed out with aspmx3.googlemail.com. Feb 17 10:35:23 xxxxx sm-mta[12828]: o1HEZwn8011833: to=<[email protected]>, ctladdr=<[email protected]> (33/33), delay=00:59:25, xdelay=00:12:36, mailer=esmtp, pri=300353, relay=aln-mailrelay.att.net. [12.102.252.75], dsn=4.0.0, stat=Deferred: Connection timed out with aln-mailrelay.att.net. If you take a look, they all send, but then (HOURS later) I get an error "stat=Deferred: Connection timed out with {server}". I'm at my wits end, because I use this same setup on each of my servers, and they all work.

  Read the article

• SQL Server "Long running transaction" performance counter: why no workee?

  - by Sleepless

  Please explain to me the following observation: I have the following piece of T-SQL code that I run from SSMS: BEGIN TRAN SELECT COUNT (*) FROM m WHERE m.[x] = 123456 or m.[y] IN (SELECT f.x FROM f) SELECT COUNT (*) FROM m WHERE m.[x] = 123456 or m.[y] IN (SELECT f.x FROM f) COMMIT TRAN The query takes about twenty seconds to run. I have no other user queries running on the server. Under these circumstances, I would expect the performance counter "MSSQL$SQLInstanceName:Transactions\Longest Transaction Running Time" to rise constantly up to a value of 20 and then drop rapidly. Instead, it rises to around 12 within two seconds and then oscillates between 12 and 14 for the duration of the query after which it drops again. According to the MS docs, the counter measures "The length of time (in seconds) since the start of the transaction that has been active longer than any other current transaction." But apparently, it doesn't. What gives?

  Read the article

• Default route not on LAN

  - by jarmund

  I have a network that in principle looks like this: H1---\ /----Inet1 H2---->---GW1---< H3---/ \----GW2-----Inet2 H1 and H2 = Hosts that need access to internet with GW1 Inet1 = Internet link over 3G connection Inet2 = 5GHz link to Internet (not always up) GW1 = Works as a router, automatically picking the "best" connection between Inet1 and Inet2 (the latter via GW2). GW2 = 5GHz wifi router And here's the problem: H3 only needs internet access when Inet2 is up. What i was thinking of doing was a routing table that looks like this: route to GW2 via GW1 default route is via GW2 I first set the route to GW2 via GW1 without a problem. But when i try route add default gw 1.2.3.4 (1.2.3.4 being the IP of GW2), it complains "SIOCADDRT: No such device" Is the problem that the default gw i'm trying to set is not reachable directly? Is there a different approach that would allow me to achieve this? An alternative (and hypothetical) approach: Since H3 will be using a static IP, is it possible to do some magic with iptables on GW1 to forward any packets from H3 to GW3, thereby "tricking" H3 into using GW2 as its default router?

  Read the article

< Previous Page | 286 287 288 289 290 291 292 293 294 295 296 297  | Next Page >