ask - Page 291 - Developer IT

Can't enable Bluetooth 13.10

- by user205872

I'm a new user to Ubuntu. I previously installed Xubuntu 13.04 on my Compaq nx8420 and was able to use Bluetooth with no issues. I recently performed a clean install of Ubuntu 13.10 (not Xubuntu), and now can't enable bluetooth. I go to the default Bluetooth app, move the slider to 'On' and it slides straight back to 'Off'. Do I need to install any extra packages or use an alternative app to get Bluetooth working? I can't think of a reason why it would work in Xubuntu 13.04, but not Ubuntu 13.10. Thanks in advance for any help. Zac

Read the article

Can't print on my brand new Canon Pixma MP495

- by Jean Ludovic Vandal

I just purchased a Canon Pixma MP495. It was working perfect, except for the scanner. It won't install the driver for the scanner. Anyway, I was printing using the new printer. After a while, it started saying that the printing job was sent to the printer and then that the print job was completed. But, nothing came out of the printer. I uninstalled the driver and installed it over again. Nothing. Can somebody help me out. Can't work without a printer. Thanks in advance.

Read the article

upgrade from ubuntu 13.04 to 13.10 causes vmware workstation 9 problems

- by dan

so, upgrade caused problem where running vmware ws 9 needed patches to accommodate linux kernal 3.11. I applied those fixes I found that others reported, and now i can only run vmware ws 9 from sudo. If i run it from standard user, it says it wants to recompile modules, which it does not do unless I open up a terminal and run sudo vmware. that works, but would like it to work correctly, have the modules that are recompiled stick. when running under sudo vmware, it does recompile with errors.. (vmware-unity-helper:13019): Gtk-WARNING **: Unable to locate theme engine in module_path: "murrine", and starts up and works ok. any ideas? thanks for any help you can provide

Read the article

what about laptop parts from Pcpartsltd.com?

- by pcpartsltd

i will buy some items form Pcpartsltd.com,what about it? i have seen some words:Pcpartsltd.com limited is a direct Exporter of high quality pc part notebooks, laptop power adapters, laptop batteries, laptop keyboards, laptop Inverters, laptop Hinges, laptop CPU Fan, laptop driver, laptop MotherBoards, Samsung Wall Mount, laptop LCD Bezel/ LCD lid, laptop lcd/led panel and Laptop LCD Video Cable. We are Laptop Parts experts.

Read the article

Nvidia 740M still not working after Bumblebee installation

- by Jon

first of all, I have checked a lot of similar topics, but I still can't get my laptop to use Nvidia 740M. So first things first. I have a laptop Asus X550V(i5-3230, 4gb RAM, Nvidia 740M + Intel HD4000). I installed Ubuntu 13.10 alongside Win8(preinstalled) and both systems are running without problems. However, I have problem with second graphic card(Nvidia 740M), as Ubuntu doesn't recognize it. I installed bumblebee with this tutorial https://wiki.ubuntu.com/Bumblebee#Installation, but I still get error "Cannot access secondary GPU" error when trying to run ''optirun Steam'' in terminal. Then I tried to do this: [ERROR]Cannot access secondary GPU - error: [XORG] (EE) No devices detected. you need to edit the /etc/bumblebee/xorg.conf.nvidia (or /etc/bumblebee/xorg.conf.nouveau if using the noveau driver) and specify the correct BusID by following the instructions therein. But with lspci / VGA i get only info about Intel 4000, but no Nvidia. When I type only lspci, I get the line for Nvidia 740M,but after I edit the config file I still get second card error. Also, in /etc/bumblebee/xorg.conf.nvidia there wasn't BusID or anything similar, so I just added the whole line in device section. As I sad, I tried a lot of things to get it working, avoiding this forum(as I din't want to bother people with some solutions possible), but alas!, I had to bother you. If there is a need for some additional info, just say, no problem at all. Thank you very much in advance. :)

Read the article

Can't copy from hfs+ external

- by Janine

I've spent days and days trying to figure this out, but still can't. I think I've read every article on this and tried all there is to try, and I still can't copy any file from my mac-formatted hfs+ external drive. Sorry if there's still an article I've missed.. I have disabled journaling and tried all the hfsprogs commands I could find, but still whenever I click on a folder on the external and try to copy it to my home directory, I get this: "The folder xxx cannot be handled because you don't have permission to read its content." I then found an article about inoring this by copying files through the Terminal. When trying to run the sudo cp -r command in the Terminal with my external drive path, I always get 'no such file or directory'.. Does anyone have another suggestion for me? Thanks in advance!

Read the article

GUI for watching logs (tail and grep)

- by Grzegorz Oledzki

Could you recommend a GUI application with powerful log watching capabilities? Generally it would work as tail -f in GUI, but on top of that following features would be very useful: filtering out some lines based on (regular) expressions coloring some lines based on (regular) expressions interactive search saveable configuration easily applicable to different files notifications based on (regular) expressions A similar tool on Windows is BareTail and its paid version - BareTailPro

Read the article

I have tearing or extremely low fps on fullhd video playback on Ubuntu 12.10 beta 2 , plus 3d gaming is imposible !

- by digitalcrow

I have tearing or extremely low fps on fullhd video playback on Ubuntu 12.10 beta 2 , plus 3d gaming is imposible ! I don't know what are you trying to do but seems pretty FAILED to me ! It sucks way too much ! -Plus wifi internet connection stays for 5minutes then no internet ! but wifi connections stays. I've tested ubuntu 12.10 beta 2 64bit with 1) Nvidia geforce gts250 (EXCESSIVE TEARING, 3d games dont change res and have low fps plus bad support on plymouth etc) 2) Ati radeon hd 6450 (Low Fps on full hd video playback , can play hd flash videos)

Read the article

How to fix AVI index error

- by Tim

I try to open an AVI file. The first software I tried is VLC media player. It reports some error about AVI index: This AVI file is broken. Seeking will not work correctly. Do you want to try to fix it? This might take a long time. I chose yes, and it began fixing AVI index and existed when the repair progress bar reaches 20% or so. Then the video started playing and stopped much earlier than when it is supposed to finish. Next I tried to open it in Totem Movie Player, which also stopped earlier at the same place as in VLC player. I tried to play it in GMplayer. Now the entire AVI file can be played from start to finish, but it is impossible to drag playing progress bar while it was possible in VLC player and Totem player. I heard that Avidemux can fix AVI index error, but later discovered it even failed to open the AVI file before it could try to fix the error. So I was wondering how I can fix the AVI index error, or at least drag the playing progress bar in GMplayer? Thanks and regards!

Read the article

Unable to remove the lock by normal means

- by Loki

I've been installing ubuntu restricted extras via the software center. Everything was going well at first, but then the installation process froze on 'applying changes' stage. I've had this in the past already, and usually just hitting the 'cancel' button helped, but not this time. Obviously, the install process has placed a lock, and I couldn't issue any apt-get commands. then i've tried doing what was suggested here Fixing Could not get lock /var/lib/dpkg/lock : sudo fuser -cuk /var/lib/dpkg/lock; sudo rm -f /var/lib/dpkg/lock but it seemed to me that it has only killed my X server. Okay, i've just pressed the power button on my PC, and restarted, hoping that the lock was finally off and i could reinstall the stuff. No dice. when I open the software center, I still have one operation in process, a weird one: " Searching | Cancelling ". The 'cancel' button is either inactive, or it just does nothing. So I've become desperate and decided to write here. How do I fix the problem? Can't install anything on a fresh ubuntu 12.04 :) Thanks in advance

Read the article

Multiple monitors showing same screen but different resolutions

- by Luis Alvarado

Is it possible to have 2 or more monitors showing the same screen, for example the same desktop but with different resolutions. Like the clone option in Nvidia or the mirror option using the Display settings in Ubuntu but instead of showing the same output with the same resolution, the both show the same output using a resolution that is native for each monitor connected. In my case if I have a netbook that has max resolution of 1360x768 and a TV that has 1280x1024, the would both show the same desktop but each with their own resolution that is compatible for each device. This would help in trying to find a resolution that works on both monitors and in cases like a mini netbook and a huge TV it would solve issues like having max 800x600 in one monitor and min 1024x768 in the other. In the case I tested I was using an HDMI cable but this question also involves VGA and any other connection. I have 3 tests scenarios for this: Scenario 1 - Laptop HP DV6000 (Intel Integrated Video) with 1360x760 connected to a Samsung LED 42 TV that has 1280x900. Scenario 2 - Laptop EEE with 1024x600 (Intel Integrated Video) connected to Sony LCD TV that supports 1280x900. Scenario 3 - Intel Desktop with Nvidia 440 GT with HDMI connected to Soneview 32' TV that supports 1920x1080 and VGA connected to an Epson Video Beam that supports 1280x1024 max. In this 3 scenarios I need to be able to show the same desktop and same views but on different resolutions for each output device. UPDATE: Tested with Xubuntu and the way it handles multiple monitors is precisely what I am asking. The ability to handle the resolution of different monitors showing the same thing.

Read the article

How to un-fullscreen an application on your secondary monitor in 11.10

- by Dan Rempel

Nvidia twinview wasn't working for me very well so I uninstalled it and started using the nouveau driver, since then my dual monitors are working properly. With 11.10 the panel has changed. It appears on my main monitor only, along with the unity bar. When I have an application full screened the panel acts as the file menu, along with max, min, and close options. However I'm noticing when I have something full screened on my secondary monitor (where there is no panel) I have no way of un-fullscreening it. The panel on the main monitor do not show any options when that window is selected. This is okay for some apps like my web browser that has these buttons in it anyway, but I fullscreened Banshee and now it's stuck there... Any idea on how to un-fullscreen something in this situation?

Read the article

Lenovo V570 CPU fan running constantly, CPU core 1 running over 90%!

- by Rabbit2190

I have seen that a lot of people are having this same issue. I am running a Lenovo V570 i5 4 core, 6 gigs of ram, and am running 11.10 Onieric Ocelot. On my system monitor graph it shows CPU at 20%, when I open the monitor it shows core #1 at around 90%, the other cores fluctuate at or below 5-12% if even. Now this seems like a really terrible balance of power between the cores, especially with so much stress on one core only, when these things are designed to work with 4 cores and not at such high temps. My current readings say 64 degrees Celsius, this does not seem normal for any cpu, and I am seriously considering, working on my windows7 partition until I see a real solution to this issue or upgrading to 12.04 right away when it comes out... I have seen countless things saying it has something to do with the Kernel, the kernel on mine is the same as when I upgraded, I really do not like messing with it, as when I had 11.04, I did tinker with it due to the freeze issues I was having, and that just made worse issues. I like this version 11.10 and would like to keep it for a while, but without the fear that my core is going to fry! So any help would be much appreciated! I did try changing a couple things in ACPI, and restarting this did not help, and here I am. I tried one thing prior to that that was listed under a different computer brand, but it would not do a make on the file. I really need help with this, I rely on this computer for a lot of things, and love this OS! Please help so I do not need to resort to my Microsoft partition! PLEASE! Here is the fwts cpufrequ- output: rabbit@rabbit-Lenovo-V570:~$ sudo fwts cpufreq - 00001 fwts Results generated by fwts: Version V0.23.25 (Thu Oct 6 15 00002 fwts :12:31 BST 2011). 00003 fwts 00004 fwts Some of this work - Copyright (c) 1999 - 2010, Intel Corp. 00005 fwts All rights reserved. 00006 fwts Some of this work - Copyright (c) 2010 - 2011, Canonical. 00007 fwts 00008 fwts This test run on 02/04/12 at 17:23:22 on host Linux 00009 fwts rabbit-Lenovo-V570 3.0.0-17-generic-pae #30-Ubuntu SMP Thu 00010 fwts Mar 8 17:53:35 UTC 2012 i686. 00011 fwts 00012 fwts Running tests: cpufreq. 00014 cpufreq CPU frequency scaling tests (takes ~1-2 mins). 00015 cpufreq --------------------------------------------------------- 00016 cpufreq Test 1 of 1: CPU P-State Checks. 00017 cpufreq For each processor in the system, this test steps through 00018 cpufreq the various frequency states (P-states) that the BIOS 00019 cpufreq advertises for the processor. For each processor/frequency 00020 cpufreq combination, a quick performance value is measured. The 00021 cpufreq test then validates that: 00022 cpufreq 1) Each processor has the same number of frequency states 00023 cpufreq 2) Higher advertised frequencies have a higher performance 00024 cpufreq 3) No duplicate frequency values are reported by the BIOS 00025 cpufreq 4) Is BIOS wrongly doing Sw_All P-state coordination across cores 00026 cpufreq 5) Is BIOS wrongly doing Sw_Any P-state coordination across cores 00027 cpufreq Frequency | Speed 00028 cpufreq -----------+--------- 00029 cpufreq 2.45 Ghz | 100.0 % 00030 cpufreq 2.45 Ghz | 83.7 % 00031 cpufreq 2.05 Ghz | 69.2 % 00032 cpufreq 1.85 Ghz | 62.5 % 00033 cpufreq 1.65 Ghz | 55.2 % 00034 cpufreq 1400 Mhz | 48.6 % 00035 cpufreq 1200 Mhz | 41.8 % 00036 cpufreq 1000 Mhz | 34.5 % 00037 cpufreq 800 Mhz | 27.6 % 00038 cpufreq 9 CPU frequency steps supported 00039 cpufreq Frequency | Speed 00040 cpufreq -----------+--------- 00041 cpufreq 2.45 Ghz | 97.7 % 00042 cpufreq 2.45 Ghz | 83.7 % 00043 cpufreq 2.05 Ghz | 69.6 % 00044 cpufreq 1.85 Ghz | 63.3 % 00045 cpufreq 1.65 Ghz | 55.7 % 00046 cpufreq 1400 Mhz | 48.7 % 00047 cpufreq 1200 Mhz | 41.7 % 00048 cpufreq 1000 Mhz | 34.5 % 00049 cpufreq 800 Mhz | 27.5 % 00050 cpufreq Frequency | Speed 00051 cpufreq -----------+--------- 00052 cpufreq 2.45 Ghz | 97.7 % 00053 cpufreq 2.45 Ghz | 84.4 % 00054 cpufreq 2.05 Ghz | 69.6 % 00055 cpufreq 1.85 Ghz | 62.6 % 00056 cpufreq 1.65 Ghz | 55.9 % 00057 cpufreq 1400 Mhz | 48.7 % 00058 cpufreq 1200 Mhz | 41.7 % 00059 cpufreq 1000 Mhz | 34.7 % 00060 cpufreq 800 Mhz | 27.8 % 00061 cpufreq Frequency | Speed 00062 cpufreq -----------+--------- 00063 cpufreq 2.45 Ghz | 100.0 % 00064 cpufreq 2.45 Ghz | 82.6 % 00065 cpufreq 2.05 Ghz | 67.8 % 00066 cpufreq 1.85 Ghz | 61.4 % 00067 cpufreq 1.65 Ghz | 54.9 % 00068 cpufreq 1400 Mhz | 48.3 % 00069 cpufreq 1200 Mhz | 41.1 % 00070 cpufreq 1000 Mhz | 34.3 % 00071 cpufreq 800 Mhz | 27.4 % 00072 cpufreq Frequency | Speed 00073 cpufreq -----------+--------- 00074 cpufreq 2.45 Ghz | 96.2 % 00075 cpufreq 2.45 Ghz | 82.5 % 00076 cpufreq 2.05 Ghz | 69.3 % 00077 cpufreq 1.85 Ghz | 62.7 % 00078 cpufreq 1.65 Ghz | 55.0 % 00079 cpufreq 1400 Mhz | 47.4 % 00080 cpufreq 1200 Mhz | 41.1 % 00081 cpufreq 1000 Mhz | 34.0 % 00082 cpufreq 800 Mhz | 27.2 % 00083 cpufreq Frequency | Speed 00084 cpufreq -----------+--------- 00085 cpufreq 2.45 Ghz | 96.5 % 00086 cpufreq 2.45 Ghz | 83.6 % 00087 cpufreq 2.05 Ghz | 68.1 % 00088 cpufreq 1.85 Ghz | 61.7 % 00089 cpufreq 1.65 Ghz | 54.9 % 00090 cpufreq 1400 Mhz | 48.0 % 00091 cpufreq 1200 Mhz | 41.1 % 00092 cpufreq 1000 Mhz | 34.2 % 00093 cpufreq 800 Mhz | 27.8 % 00094 cpufreq Frequency | Speed 00095 cpufreq -----------+--------- 00096 cpufreq 2.45 Ghz | 96.4 % 00097 cpufreq 2.45 Ghz | 82.6 % 00098 cpufreq 2.05 Ghz | 68.8 % 00099 cpufreq 1.85 Ghz | 60.5 % 00100 cpufreq 1.65 Ghz | 52.4 % 00101 cpufreq 1400 Mhz | 48.8 % 00102 cpufreq 1200 Mhz | 41.1 % 00103 cpufreq 1000 Mhz | 34.2 % 00104 cpufreq 800 Mhz | 26.4 % 00105 cpufreq Frequency | Speed 00106 cpufreq -----------+--------- 00107 cpufreq 2.45 Ghz | 95.3 % 00108 cpufreq 2.45 Ghz | 82.5 % 00109 cpufreq 2.05 Ghz | 65.5 % 00110 cpufreq 1.85 Ghz | 62.8 % 00111 cpufreq 1.65 Ghz | 54.8 % 00112 cpufreq 1400 Mhz | 48.0 % 00113 cpufreq 1200 Mhz | 41.2 % 00114 cpufreq 1000 Mhz | 34.2 % 00115 cpufreq 800 Mhz | 27.3 % 00116 cpufreq Frequency | Speed 00117 cpufreq -----------+--------- 00118 cpufreq 2.45 Ghz | 96.3 % 00119 cpufreq 2.45 Ghz | 83.4 % 00120 cpufreq 2.05 Ghz | 68.3 % 00121 cpufreq 1.85 Ghz | 61.9 % 00122 cpufreq 1.65 Ghz | 54.9 % 00123 cpufreq 1400 Mhz | 48.0 % 00124 cpufreq 1200 Mhz | 41.1 % 00125 cpufreq 1000 Mhz | 34.2 % 00126 cpufreq 800 Mhz | 27.3 % 00127 cpufreq Frequency | Speed 00128 cpufreq -----------+--------- 00129 cpufreq 2.45 Ghz | 100.0 % 00130 cpufreq 2.45 Ghz | 77.9 % 00131 cpufreq 2.05 Ghz | 64.6 % 00132 cpufreq 1.85 Ghz | 54.0 % 00133 cpufreq 1.65 Ghz | 51.7 % 00134 cpufreq 1400 Mhz | 45.2 % 00135 cpufreq 1200 Mhz | 39.0 % 00136 cpufreq 1000 Mhz | 33.1 % 00137 cpufreq 800 Mhz | 25.5 % 00138 cpufreq Frequency | Speed 00139 cpufreq -----------+--------- 00140 cpufreq 2.45 Ghz | 93.4 % 00141 cpufreq 2.45 Ghz | 75.7 % 00142 cpufreq 2.05 Ghz | 64.5 % 00143 cpufreq 1.85 Ghz | 59.1 % 00144 cpufreq 1.65 Ghz | 51.4 % 00145 cpufreq 1400 Mhz | 45.9 % 00146 cpufreq 1200 Mhz | 39.3 % 00147 cpufreq 1000 Mhz | 32.7 % 00148 cpufreq 800 Mhz | 25.8 % 00149 cpufreq Frequency | Speed 00150 cpufreq -----------+--------- 00151 cpufreq 2.45 Ghz | 92.1 % 00152 cpufreq 2.45 Ghz | 78.1 % 00153 cpufreq 2.05 Ghz | 65.7 % 00154 cpufreq 1.85 Ghz | 58.6 % 00155 cpufreq 1.65 Ghz | 52.5 % 00156 cpufreq 1400 Mhz | 45.7 % 00157 cpufreq 1200 Mhz | 39.3 % 00158 cpufreq 1000 Mhz | 32.7 % 00159 cpufreq 800 Mhz | 24.3 % 00160 cpufreq Frequency | Speed 00161 cpufreq -----------+--------- 00162 cpufreq 2.45 Ghz | 88.9 % 00163 cpufreq 2.45 Ghz | 79.8 % 00164 cpufreq 2.05 Ghz | 58.4 % 00165 cpufreq 1.85 Ghz | 52.6 % 00166 cpufreq 1.65 Ghz | 46.9 % 00167 cpufreq 1400 Mhz | 41.0 % 00168 cpufreq 1200 Mhz | 35.1 % 00169 cpufreq 1000 Mhz | 29.1 % 00170 cpufreq 800 Mhz | 22.9 % 00171 cpufreq Frequency | Speed 00172 cpufreq -----------+--------- 00173 cpufreq 2.45 Ghz | 92.8 % 00174 cpufreq 2.45 Ghz | 80.1 % 00175 cpufreq 2.05 Ghz | 66.2 % 00176 cpufreq 1.85 Ghz | 59.5 % 00177 cpufreq 1.65 Ghz | 52.9 % 00178 cpufreq 1400 Mhz | 46.2 % 00179 cpufreq 1200 Mhz | 39.5 % 00180 cpufreq 1000 Mhz | 32.9 % 00181 cpufreq 800 Mhz | 26.3 % 00182 cpufreq Frequency | Speed 00183 cpufreq -----------+--------- 00184 cpufreq 2.45 Ghz | 92.9 % 00185 cpufreq 2.45 Ghz | 79.5 % 00186 cpufreq 2.05 Ghz | 66.2 % 00187 cpufreq 1.85 Ghz | 59.6 % 00188 cpufreq 1.65 Ghz | 52.9 % 00189 cpufreq 1400 Mhz | 46.7 % 00190 cpufreq 1200 Mhz | 39.6 % 00191 cpufreq 1000 Mhz | 32.9 % 00192 cpufreq 800 Mhz | 26.3 % 00193 cpufreq FAILED [MEDIUM] CPUFreqCPUsSetToSW_ANY: Test 1, Processors 00194 cpufreq are set to SW_ANY. 00195 cpufreq FAILED [MEDIUM] CPUFreqSW_ANY: Test 1, Firmware not 00196 cpufreq implementing hardware coordination cleanly. Firmware using 00197 cpufreq SW_ANY instead?. 00198 cpufreq 00199 cpufreq ========================================================= 00200 cpufreq 0 passed, 2 failed, 0 warnings, 0 aborted, 0 skipped, 0 00201 cpufreq info only. 00202 cpufreq ========================================================= 00204 summary 00205 summary 0 passed, 2 failed, 0 warnings, 0 aborted, 0 skipped, 0 00206 summary info only. 00207 summary 00208 summary Test Failure Summary 00209 summary ==================== 00210 summary 00211 summary Critical failures: NONE 00212 summary 00213 summary High failures: NONE 00214 summary 00215 summary Medium failures: 2 00216 summary cpufreq test, at 1 log line: 193 00217 summary "Processors are set to SW_ANY." 00218 summary cpufreq test, at 1 log line: 195 00219 summary "Firmware not implementing hardware coordination cleanly. Firmware using SW_ANY instead?." 00220 summary 00221 summary Low failures: NONE 00222 summary 00223 summary Other failures: NONE 00224 summary 00225 summary Test |Pass |Fail |Abort|Warn |Skip |Info | 00226 summary ---------------+-----+-----+-----+-----+-----+-----+ 00227 summary cpufreq | | 2| | | | | 00228 summary ---------------+-----+-----+-----+-----+-----+-----+ 00229 summary Total: | 0| 2| 0| 0| 0| 0| 00230 summary ---------------+-----+-----+-----+-----+-----+-----+ rabbit@rabbit-Lenovo-V570:~$

Read the article

How do I set up hosting a domain name at home with Apache?

- by Andrew McIntyre

I am relatively new to Ubuntu Linux and I am struggling to figure out the basic set-up of hosting a domain name at home with Apache2. I understand that you have to change your IP from dynamic to a static IP Address but I am not sure how you achieve that step. I am looking for some assistance on this on how to enable self signing certificates, make the domain name resolve on the Internet from hosting the website on the web server, enabling protected directories and the basic commands of accessing the directory where the website files can be uploaded and available on the World Wide Web.

Read the article

Difference between Emacs metapackage and Emacs

- by roseck

I have the following sources enabled: main, universe, restricted and multiverse. On Ubuntu Software Center on 11.10 I see two packages for Emacs: The GNU Emacs editor (metapackage) The GNU Emacs editor What is the difference between metapackage version and non-metapackage one? By the way, this thread What differences are there between the various version of Emacs available? also explains the difference between two Emacs versions: Emacs and Emacs-snapshot, and interestingly I don't see these packages now on my Ubuntu Software Center.

Read the article

Gwibber only launches sometimes

- by Stephen Judge

I face this problem where Gwibber only launches sporadically. Sometimes when I click it to launch, it launches and then other times it doesn't. I can't seem to figure out what is preventing it from launching and what sort of information I need to collect, also where to collect it from to make a bug report. I have killed the gwibber-service processes in the System Monitor "it loads three processes called gwibber-service, is this normal" several times and tried to launch Gwibber again, but this doesn't seem to work. The process just called gwibber starts, then the three gwibber-service processes start, then the gwibbber process ends and the three gwibber-service processes remain but the application is still not launching. Generally, I want to know are other people facing the same problem. If someone can give me some guidance on how to triage this problem and get the information need to make a bug report I would be grateful. The upside to this though is at least when it is not launching it is preventing me from wasting endless hours reading my streams on Identi.ca and Twitter, so it is a bit Workrave for microblogging. In which case maybe I shouldn't fix this problem :-)

Read the article

Root cannot access /dev/urandom

- by Darren Newton

I am trying to generate a GPG key, and I cannot generate enough entropy. So I installed rng-tools and tried following these instructions: http://serverfault.com/questions/214605/gpg-not-enough-entropy When I am logged in as root, and try to run rngd -r /dev/urandom I get the following error: can't open /dev/random: Permission denied I find this disturbing as I am root. This is Ubuntu on a virtual server (via Parallels I believe.)

Read the article

Ubuntu-installer fails preseed configuration file

- by user76171

I try to install Ubuntu 12.04 over network unattended. I installed a DHCP server (Dnsmasq), a TFTP server (tftpd-hpa), I got the netboot.tar.gz archive with the pxelinux.0 file, the pxelinux.cfg directory, the linux kernel and the initrd.gz image and I put a preseed file into my web server. Dnsmasq, tftpd-hpa, pxelinux and Apache are all on the same machine. The PCs MB doesn’t support PXE, so I use iPXE and boot it from a CD. The PC gets an IP from the DHCP, then iPXE loads #pxelinux.cfg/default, which I edited like this: timeout 5 prompt 0 default install label install kernel ubuntu-installer/i386/linux append vga=normal locale=en_GB setup/layoutcode=sl_SI console-setup/layoutcode=sl_SI netcfg/choose_interface=auto initrd=ubuntu-installer/i386/initrd.gz netcfg/get_hostname=ubuntux preseed/url=#http://192.168.10.10/ins/preseed.cfg Then it loads the linux kernel and the initrd.gz image. Then I got a question: Detect keyboard layout? I desided to bother with this later. So I answer No, and then twice on Englishjust to get trough and then I get to the error: The installer failed to process the preconfiguration file from #http://192.168.10.10/ins/preseeed.cfg. The file may be corrupt. I created the file myself and copied the d-I commands into it. I also tried to get the preseed.cfg over a web browser and it works fine. So why is the installer failing?

Read the article

Something about traveling in china?

- by user79989

Well, i am Chinese ,i am in China, if you want to go to trvalling to China , you must must go to Beijing and the city of Xi' an , because of if you go to China you have to go to Beijing , eveyone in China wants to go to Beijing to play at Tian an men Place .The back of the square is the home of the ancient Chinese emperors , and you must know about Chinese Chang Cheng ,you can also see it in Beijing , and don't need to talk too much ,you must know Beijing , and there also has many modern culutures ,such like 798 arts center , and the SANLITUN village , and many many many foregner love to go to NAN LUO GU XIANG. ChinaTour.com is a reliable China Travel Agency based in USA, which has specialized in inbound China travel for decades. We provide a spectrum of private China tours, China group tours, customized China tours, China hotel booking and China-USA air ticket booking service for individuals, groups, families, students etc.

Read the article

recover data in linux removed with rm

- by user3717896

Today i deleted my home directory (in wrong action) with: sudo rm -rf * And when i use extundelete i get this message: root@ubuntu:~# sudo extundelete --restore-directory /home/hamed/ /dev/sda2WARNING: Extended attributes are not restored. Loading filesystem metadata ... 746 groups loaded. Loading journal descriptors ... 29931 descriptors loaded. Searching for recoverable inodes in directory /home/hamed/ ... 498 recoverable inodes found. Looking through the directory structure for deleted files ... 498 recoverable inodes still lost. No files were undeleted. why it can't recover? Anyone can help me to return my Desktop, Documents and etc? I have ubuntu 14.04.

Read the article

12.04 boots fine, with graphical splash screen, but then Monitor "out of range"

- by Jim Bednar

I see dozens of posts from people whose monitors are saying "out of range" under Ubuntu; seems like there are some serious problems in Ubuntu with autodetection of monitor capabilities. :-( But none of the many, many suggestions I found have solved my problem, and right now I can't use anything graphical on this machine! History: I installed Ubuntu 12.04 on my HP Proliant Microserver N40L, which worked reasonably at the default resolution across several reboots. At some point I noticed that the proprietary video driver was not in use, and tried to install one to get better window-drawing speeds, but it failed with some sort of error, and I gave up on that. A few weeks later when I next rebooted, it showed the usual BIOS screen and various boot loading screens (including GRUB), and then the usual purple Ubuntu splash screen with the dots showing that things were loading, but when it finished booting the monitor went black and eventually showed "Out of range" (with no other information). Given that there were several weeks between reboots (it's a server, after all), I've no idea if it was some system update, trying to install the proprietary drivers, or something else that caused the problem. Anyway, the system has booted fine, as I can do Ctrl-Alt-F1 to get a text prompt and can log in there. But Ctrl-Alt-F7 goes back to the out of range error. Some posters said to try Ctrl-Alt-- (minus) to cycle through resolutions until one works, but that didn't have any visible effect. Many, many others said it was a grub problem, which seems unlikely given that grub's screen looks fine, but I tried editing /etc/default/grub to set a particular resolution (trying many of them) and running update-grub, with no apparent effect. Rebooting into failsafe mode works the same as regular mode. Replacing xorg.conf with xorg.conf.failsafe works the same too. I'm at my wits' end! Isn't there anything I can do to convince Ubuntu to choose a mode that the monitor supports? E.g. the one that it is using for the splash screen? I don't need great resolution on this machine, just anything that works!!!!! Help!!!!!! Please!!!!

Read the article

How can I get pictures from Shotwell on the notebook to the desktop?

- by Meng Tian

My father has a desktop and a notebook. The desktop is way more powerful and has RAID set up, so he uses it for editing and storing his pictures. But he spends several months a year away from home. So he has a notebook for this. He imports the pictures into shotwell on his computer. He likes to organise his pictures on the notebook already, by creating and naming the right events, deleting pictures and sometimes editing a bit. When he is back home, he wants to get his pictures on the desktop, without losing the names of the events in shotwell. Sadly, one cannot merge two shotwell databases, nor is it possible to import another database. Do you know any way, I can manage this? Or did I just miss something?

Read the article

How to setup an encrypted voip structure?

- by strapakowsky

What is the simplest way to set up a voip structure in a Linux machine with the following features: 1) Using free software 2) For computer-to-computer calls: end-to-end encryption set by the users, unpaid, no central authority (so skype is out) 3) For computer-to-phone calls: paid or unpaid, desirable encryption on the computer side if that is even possible 4) Ability to have a number to receive calls from regular phones My research concluded that the sip protocol is the most popular. However most discussions I've read on sip are too technical and I felt it discourages the regular user who wants to just click and talk. So I put the question above and created some separate questions about privacy with sip registrars, privacy with voip suppliers, what to look for in a sip registrar, what to look for in a voip provider. As for the software, I noticed most software either don't provide encryption (eg Ekiga) or the software doesn't work nicely and the project is abandoned (eg Twinkle), so no option seemed satisfying.

Read the article

Upgraded to 11.10 lost personal folders, Ubuntu one shows no files

- by Kevin

Upgraded to 11.04, from 10.10 system would only come up in terminal mode, but it told me that an additional upgrade was available and did I want to do that. Foolishly thinking that might fix the problem, I said yes. This time it did not make it all the way through the upgrade, when I came back to the computer over an hour later, the screen was filled with an error message "could not open display", had to reboot. Went to recovery mode on reboot to install nvidia module, when I rebooted system came up fine, but without carrying over my personal folders, I have the home folder, but no personal named folder in it. Came to Ubuntu One, but gives error message; File Sync error. (org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked Is the a way around this in order to restore my files? I know my files existed on Ubuntu one as of a few months ago.

Search Results

Search found 25182 results on 1008 pages for 'ask'.

Page 291/1008 | < Previous Page | 287 288 289 290 291 292 293 294 295 296 297 298 | Next Page >

- by user205872

- by Jean Ludovic Vandal

- by dan

- by pcpartsltd

- by Jon

- by Janine

- by Grzegorz Oledzki

- by digitalcrow

- by Tim

- by Loki

- by Luis Alvarado

- by Dan Rempel

- by Rabbit2190

- by Andrew McIntyre

- by roseck

- by Stephen Judge

- by Darren Newton

- by user76171

- by user79989

- by user3717896

- by Jim Bednar

- by Meng Tian

- by strapakowsky

- by bioShark

- by Kevin

< Previous Page | 287 288 289 290 291 292 293 294 295 296 297 298 | Next Page >