Search Results

Search found 9832 results on 394 pages for 'video'.

Page 292/394 | < Previous Page | 288 289 290 291 292 293 294 295 296 297 298 299  | Next Page >

• Colored blocks on boot

  - by stackzerad

  When my laptop tries to boot right after POST I see colored blocks with flashing symbols in them. I am able to boot from windows PE cd. Tried fixboot and fixmbr with no success. I have also tried replacing boot files (ntldr, io.sys etc..) and removing video card drivers from windows\system32\drivers. The drive is seagate 2.5 ATA 160GB and has one NTFS partition on it. I have already fixed this issue by reformating the drive and reinstalling everything but after couple of weeks I get the same issue again. The diagnostics software shows no bad sectors on it and virus scan didn't find anything. Does anybody have an idea what this might be? UPDATE: tried defragmenting the hard drive just in case, but still no luck

  Read the article

• Grep all files in a directory and print matches with file name

  - by javanix

  I have a list of log files that I create as part of a video encoding script that I wrote. I would like to search all of them and print out certain statistics from the encode - how fast they were encoded, what settings were used, etc. I can search for the average framerate in one file via this 1 liner: cat ${filename} | grep average which outputs: work: average encoding speed for job is 23.211176 fps and search for the ratefactor: cat ${filename} | grep RF I would like to search all files in the directory and print off one, or prefereably both pieces of information along with the filename. Is there any way I can use find or grep to get this in a one-liner, or do I need to write a script? I would like output like this: /home/javanix/filename.log <RF line> <average line> I would like this to either work using FreeBSD 9 or Ubuntu 12.04.

  Read the article

• Where does the temporary flash file get stored when I am viweing from Firefox

  - by Nishant

  I am watching a lecture and it seems to be adobe flash ...I wanna save this video that I am viewing . The website I am checking is http://cs75.tv/2009/fall/ . I am using Firefox . Dont know if this info helps , but .... My about:cache result is this . Memory cache device Number of entries: 212 Maximum storage size: 13312 KiB Storage in use: 8087 KiB Inactive storage: 6819 KiB List Cache Entries Disk cache device Number of entries: 3224 Maximum storage size: 500000 KiB Storage in use: 26066 KiB Cache Directory: C:\Documents and Settings\nvarm\Local Settings\Application Data\Mozilla\Firefox\Profiles\d74svniy.default\Cache List Cache Entries Offline cache device Number of entries: 0 Maximum storage size: 512000 KiB Storage in use: 0 KiB Cache Directory: C:\Documents and Settings\nvarm\Local Settings\Application Data\Mozilla\Firefox\Profiles\d74svniy.default\OfflineCache List Cache Entries

  Read the article

• Where does the temporary flash file get stored when I am viweing from Firefox

  - by Nishant

  I am watching a lecture and it seems to be adobe flash ...I wanna save this video that I am viewing . The website I am checking is http://cs75.tv/2009/fall/ . I am using Firefox . Dont know if this info helps , but .... My about:cache result is this . Memory cache device Number of entries: 212 Maximum storage size: 13312 KiB Storage in use: 8087 KiB Inactive storage: 6819 KiB List Cache Entries Disk cache device Number of entries: 3224 Maximum storage size: 500000 KiB Storage in use: 26066 KiB Cache Directory: C:\Documents and Settings\nvarm\Local Settings\Application Data\Mozilla\Firefox\Profiles\d74svniy.default\Cache List Cache Entries Offline cache device Number of entries: 0 Maximum storage size: 512000 KiB Storage in use: 0 KiB Cache Directory: C:\Documents and Settings\nvarm\Local Settings\Application Data\Mozilla\Firefox\Profiles\d74svniy.default\OfflineCache List Cache Entries

  Read the article

• Where does the temporary flash file get stored when I am viweing from Firefox

  - by Nishant

  I am watching a lecture and it seems to be adobe flash ...I wanna save this video that I am viewing . The website I am checking is http://cs75.tv/2009/fall/ . I am using Firefox . Dont know if this info helps , but .... My about:cache result is this . Memory cache device Number of entries: 212 Maximum storage size: 13312 KiB Storage in use: 8087 KiB Inactive storage: 6819 KiB List Cache Entries Disk cache device Number of entries: 3224 Maximum storage size: 500000 KiB Storage in use: 26066 KiB Cache Directory: C:\Documents and Settings\nvarm\Local Settings\Application Data\Mozilla\Firefox\Profiles\d74svniy.default\Cache List Cache Entries Offline cache device Number of entries: 0 Maximum storage size: 512000 KiB Storage in use: 0 KiB Cache Directory: C:\Documents and Settings\nvarm\Local Settings\Application Data\Mozilla\Firefox\Profiles\d74svniy.default\OfflineCache List Cache Entries

  Read the article

• Mountain Lion screen crashes after returning from sleep

  - by Aron Rotteveel

  During the past 3 days I have experienced the following issue: when returning from sleep, I see an extremely garbled version of my desktop. The only thing that seems to help is a reboot. My first guess is that this is related to the video card. After looking into this issue, I found a lot of problems related to ML and returning from sleep, such as this post on AskDifferent, but I think this is a different issue because it does not speak of a garbled screen. Some more details: System: MacBook Pro 15" early 2011, 2,2GHZ I7, 8GB Ram, AMD Radeon HD6750M 1024 The issue seems to happen only when I open my laptop in the morning; if I close and open my laptop during the day, it does not seem to happen. The issue 'solves' when rebooting. Photo of how this looks: Update November 27th 2012: I re-installed my laptop a couple of weeks ago, which seemed to have solved the problem, but sadly, it still persists.

  Read the article

• Samba PDC plus universal folder

  - by skids89

  I know how to configure samba on my ubuntu box to become a PDC however I need some select files to be accessible to multiple users. These files are beyond their personal files. I.E. users A-C need to be able to access a schedule saved as a spreadsheet. But user D does not and users B-D need to be able to access confidential employee info but user A does not. How do I set this up on top of the PDC structure? Any video tutorials would be a plus. Im new to linux so documentation is a confusing slow slog to learn. Thanks so much in advance!

  Read the article

• How to add addtional disks to a Windows 2008 KVM based Guest?

  - by taazaa

  I have a Win 2008 KVM based guest VM running on a Ubuntu 10 host. It is a raw image of 22G. I want to add a "data" drive which would show up as "D:\" drive on the guest. I first created a raw image using: qemu-img create -f raw ~/vmdisk2.img 50G Then, tried attaching it using virsh attach-disk. When that did not work, I tried editing the xml file of the VM directly. Both did not seem to work. I would greatly appreciate any help on how to do this and what the best practice is. I want to keep the base image small, so that I can clone it (hopefully) and then attach necessary storage based on the application at hand. Update: The xml of the vm before adding the second drive: <domain type='kvm'> <name>win08e-vm1</name> <uuid>183a4ba0-1c0b-0b04-ad01-aa7c3a4cb390</uuid> <memory>1048576</memory> <currentMemory>1048576</currentMemory> <vcpu>2</vcpu> <os> <type arch='x86_64' machine='pc-0.12'>hvm</type> <boot dev='hd'/> </os> <features> <acpi/> <apic/> <pae/> </features> <clock offset='localtime'/> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/bin/kvm</emulator> <disk type='file' device='disk'> <driver name='qemu' type='raw'/> <source file='/var/lib/libvirt/images/win08e-vm1.img'/> <target dev='hda' bus='ide'/> <address type='drive' controller='0' bus='0' unit='0'/> </disk> <disk type='file' device='cdrom'> <driver name='qemu' type='raw'/> <source file='/home/taazaa/iso/Win08ER264.iso'/> <target dev='hdc' bus='ide'/> <readonly/> <address type='drive' controller='0' bus='1' unit='0'/> </disk> <controller type='ide' index='0'> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/> </controller> <interface type='bridge'> <mac address='52:54:00:7f:a7:ae'/> <source bridge='br0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </interface> <serial type='pty'> <target port='0'/> </serial> <console type='pty'> <target type='serial' port='0'/> </console> <input type='tablet' bus='usb'/> <input type='mouse' bus='ps2'/> <graphics type='vnc' port='-1' autoport='yes' keymap='en-us'/> <video> <model type='vga' vram='9216' heads='1'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/> </video> <memballoon model='virtio'> <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/> </memballoon> </devices> </domain> Thanks!

  Read the article

• Facing gestures in Linux mint Chrome Browser

  - by aravind.udayashankara

  I am using Linux mint OS since an Year , I use to consistently download updates and install , I use chrome as a default browser , when ever I open youtube and watch some video , I listen to some gestures in sound ( say repeated lyrics of song ) while it is playing , In firefox it is working fine . What is the problem am I missing any plugin , AFAIK Chrome doesn't need a flash player plug in , It has a built in flash player . IS that the problem ? And also previously I was not facing this , recently I started using Cinimon UI centOS after this all these kind of problems started MY hard ware is 64 bit intel core i3 and also I have installed linux mint 64 bit Please let me know what is the problem and how to fix this . Thanks in advance for responding to this post

  Read the article

• Windows 8.1 backlight turns off

  - by tenhouse

  This is one of the strangest things I have ever seen. I have an HP Elitebook 8460p and recently updated my Windows 8 to Windows 8.1. Now when I have certain windows open and focused (it's always different, sometimes it's chrome, sometimes it's the control-panel and so on, there is no clear pattern) the backlight of the screen is completely turned off - when I take a torch and point it to the screen or hold it to a bright-light source I can see there is still a picture there you can even work (or better said you cuold if you'd see anything). When I tab to certain other windows the screen goes back to normal back light - I can then tab back to the other window and the backlight will be turned off again. I have no idea what's going on and also no idea what information you need. The display-adapter I got is the AMD Radeon HD 6400M - I tried updating to the newest driver but that didn't help. Here's a video of the whole thing: http://www.youtube.com/watch?v=kIV_Q8uayUA

  Read the article

• Monitor turns off about 1 second after turning it on

  - by r0ca

  Hi all! I have a hardware issue with some of the LCD monitors we have in our office. My problems is not related to video cards or anything else with the computer itself. I have 2 Dell 17" LCD screens that goes off (blank) after 1 or 2 seconds. The light remains green so it's not idling or sleeping. Just this morning, I had to replace one that goes off on 2 workstations and also on my laptop. Nothing to do with it. I tried the VGA and DVI connection w/out luck. I strongly think that this is something with a capacitor or something inside the screen but I can't figure out what it is... Is anybody heard of that kind of issue before? Regards, David.

  Read the article

• Volume randomly turning itself down on Windows 7 64-bit

  - by Arda Xi

  This is the weirdest issue I've ever encountered with my PC. Every so often, my sound will start playing back at a lower volume. This happens when watching video, listening to music, all independently. It usually lasts anywhere up to a minute, after which it will turn up again. The weird thing about it is that the volume control in Windows remains at 100%, even though the volume is audibly a lot lower. (No, I'm not going deaf, it's just my PC. I checked.) I just have no idea where to go to troubleshoot this, even. I'm using Windows 7 64-bit with an on-board Realtek sound-card. Oh, just in case someone finds this question on Google or whatever, making sure this is on Do Nothing may fix your problem. Unfortunately, it did not work for me. My settings all seem fine. This is my audio slider. (Took the screenshot while the issue showed.)

  Read the article

• How to make a quiet laptop?

  - by psihodelia

  Most modern laptops have very noisy fans. I am looking for a quiet laptop or a small stationary computer which has all its hardware built in a display. Most tasks will be PDF/docs processing, real-time audio processing, web-surfing and Skype video chats. Certainly, there is no any fan-less model today; but maybe some of the existed laptops do not switch on their fans so often or implement different solutions? For example, an iPad has no fan at all and it is fast enough for my needs, but it has no normal operating system, so I can't use it for anything but audio chats and web-surfing. Or maybe I can buy a laptop and tweak it to make it absolutely noiseless? Can you recommend any solution please?

  Read the article

• Looking for Mini itx capable of running Photoshop + Illustrator (cs4 or higher)

  - by drozzy

  Ok, so I want to build a small pc for my gf that she can take with her instead of the crappy laptop that she has. Overall I think the complete system should not weight more than 10 lbs. The requirements are to run at least 4 applications simultaneously, and be able to switch between them with no problems: Photoshop Illustrator Word editor Browser Should be able to handle 1920x1200 resolution. I am currently looking at LGA775 socket as I can just transfer my desktop cpu Q6600 to it. Currently deciding between DQ45EK and DG41TX, but any other suggestions are welcome. So I am thinking something along the lines of: MINI-BOX M350 Case with 90 watt psu Q6600 cpu (my desktop cpu) 2x2GB kingston ram (or similar) Video? Need external or built-in G45 on DQ45EK will do? My primary concern is whether the 90WATT is sufficient of the Q6600? Thanks

  Read the article

• What's the fastest way to store/access large files?

  - by philfreo

  I do a lot of video editing on my Mac and need a way to store very large (30 GB) files, and don't have room on my HD. A USB/Firewire external hard drive would work, but it seems way too slow for consistently working with such large files. I've also considered buying another computer, with a large hard drive, and putting it on the same network with a shared folder. What's the fastest / most efficient way to do this? Please consider USB 2.0 speeds, hard drive read times, ethernet speeds, etc. Are there other options I should consider?

  Read the article

• Is there a way to explore my WHS files via Xbox 360's Media Center app?

  - by bangoker

  I know its a "Console" question but its really more of a Media Center Extender question! I can access the data through the Video/Pictures options, but not through the Media Center App. Also I can only see the videos that are directly on the Videos folder on my WHS, but not any of the subfolders. Same thing in my Laptop, if I connect to my WHS through Media Player it will only show the videos on Videos but not any other sub-folder, but if I open Media Center I can then connect to server and see all the folders.

  Read the article

• USB webcam detected in KVM, but doesn't work

  - by Gene Vincent

  I have installed XP in a virtual machine running on Linux with QEMU/KVM (qemu-kvm-0.11.0-4.5.2). I export my Linux webcam to KVM using the switches "-usb -usbdevice host:046d:0929". The XP guest sees the webcam and the drivers install, but the camera only shows a black image. When I open the camera in Windows Explorer, it says "0 images" and a black image, while on a real XP, it says "1 image" and shows the video from the camera. I tried the same with a different webcam, but the result is the same. Any ideas what might be wrong or how I could debug this ?

  Read the article

• Transferring analog media (VHS casettes, vinyl records) to PC

  - by Javier Badia

  I have some VHSs and vinyl records which I'd like to convert to DVDs and CDs, respectively. I have a couple of questions about how to hook the devices up to the computer. I've seen some RCA-to-USB cables on the Internet like this one. Will those work for connecting the VCR to the computer? And what program would I use to take that and save it as a video file? Can I connect the phonograph directly to the Line In port in my PC or do I need some amplifier or something in the middle? I'm using Windows 7 x64, if it matters.

  Read the article

• Dell Vostro 1510 slow boot

  - by pkswatch

  I have an old Dell Vostro 1510 with Ubuntu and Windows 7 on it. When it is switched on, it shows the following message: NO TPM OR TPM HAS ERROR SYSTEM BIOS SHADOWED VIDEO BIOS SHADOWED Then it waits on the same screen for about 70-80 seconds before showing up the grub. I read about tpm problems but did not get anything about shadowed problems. So my guess is tpm isn't the reason for this slow booting (am I right?) But then what is it exactly? Please help..

  Read the article

• Apache Tomcat 6.0.29 startup causing Win XP SP3 reboot

  - by Liam

  Some of our Windows XP Developer machines die (black screen - no ping) when starting up Tomcat from a console. This only happens if the Tomcat debug console window is displayed (not minimised). When minimised, the startup / run is successful. I've checked for Tomcat logs and the crash sessions produce empty (zero bytes) tomcat log files. No system logs exist and no crash dump is created even though this is enabled in the Windows settings. The machine is dual screen and another machine with the same image has the same issue. The only clue is just before the crash, one of the monitors the system reports "Cannot display video mode 1280x1024" (approximate error, didn't write it down). Is there a way I can get Windows to produce log files of this crash session? Beyond running Tomcat as a service / minimised window, how can I fix (or even investigate)?

  Read the article

• Storage setup for large files

  - by Mecca

  I need to store over 200TB of data (all types, biggest being video files) and be able to access it over a local network. The files will be accessed for editing or searches. I don't need versioning, but a setup that would keep me safe from harddrive failures would be nice. Right now the content is on different harddrives, some external drives, some regular. I don't exclude the possibility of buying new/extra drives if necessary. If they will ever be exposed to the web, it wont be to the public, but just a couple of people. I have no idea what to buy to make this happen. I see some NAS solutions over the internet like this http://www.bestbuy.com/site/a/2266043.p?id=1218317764591&skuId=2266043 but the storage is not enough, plus it doesn't seem to be scalable. What do you recommend? Thanks

  Read the article

• Should I limit end-user gigabit ports to avoid saturating uplink/trunk connections?

  - by Joel Coel

  We have a campus with 16 buildings and older 850nm 1Gbps fiber links between the buildings, that all come to a core switch for our servers that also uses 1Gbps ports. We're finally starting to replace our aging 10/100 end-user switches, and much of what we're looking at are 1 Gbps units. My question is, since the trunk/uplink lines are still 1Gbps, if I were to install 1 Gbps switches for end users, should I limit the ports to 100Mbps until I can also upgrade the trunks to avoid allowing a bad-behaving host to saturate a trunk line (since we're a college, we have plenty of mis-behaving hosts) and thereby create a DoS situation for a building, or will TCP congestion control typically take care of that for me? What if we have a lot of UDP traffic (games, video chats, even a small amount of bittorrent)?

  Read the article

• Windows 7 file sharing password protecting or making stuff available to just me

  - by Carbonara

  Even with the new Homegroup feature I'm still finding the way Windows deals with folder sharing utterly baffling. Here's what I want to do. I have two computers, a PC Desktop and a laptop. I also live in a shared flat with other computer users. I have set up a Homegroup and a Workgroup on the desktop and joined them on the laptop and in the home group I have shared video, music and pictures. This is so that anyone on the network can view pictures and listen to music etc. But I want my Documents folder from my desktop to only be available to me on my laptop and not to anyone else that may be on the network. The Homegroup only allows (from what I can gather from the baffling array of options) sharing with everyone or no one. Is it possible to only allow the laptop to access the documents folder on the desktop? The user name and password are the same on both computers.

  Read the article

• How to change resolution in Ubuntu 10.04, where xvinfo is showing no adapters present?

  - by YumYum

  I am trying to maximize my resolution where I have Resolution: 800x600 (4:3) and Refresh rate: 61Hz I tried the following, but it did not work: $ xvinfo X-Video Extension version 2.2 screen #0 no adaptors present $ cvt 1920 1080 # 1920x1080 59.96 Hz (CVT 2.07M9) hsync: 67.16 kHz; pclk: 173.00 MHz Modeline "1920x1080_60.00" 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync $ xrandr --newmode clever_name 173.00 1920 2048 2248 2576 1080 1083 1088 1120 $ xrandr -q Screen 0: minimum 640 x 480, current 800 x 600, maximum 800 x 600 default connected 800x600+0+0 0mm x 0mm 800x600 61.0* 640x480 60.0 clever_name (0x11d) 173.0MHz h: width 1920 start 2048 end 2248 total 2576 skew 0 clock 67.2KHz v: height 1080 start 1083 end 1088 total 1120 clock 60.0Hz $ xrandr --addmode default clever_name $ xrandr --output default --mode clever_name xrandr: Configure crtc 0 failed

  Read the article

• VLC - Play two mp3s simultaneously from command line

  - by raoulcousins

  I'm using VLC 2.0.8 on Windows 7. How do I play two mp3s simultaneously from the command line (command line because to write a batch script that launches the mp3s)? I've tried vlc 1.mp3 2.mp3 and vlc 1.mp3 --input-slave 2.mp3 (I've seen the second one as a way to play a video file and a separate audio file simultaneously). Both of these just launch 1.mp3. Not important, but if you're wondering, the mp3s are respectively cafe sounds and rain sounds, so I can play sounds similar to those found at http://rainycafe.com/ without having to launch a browser.

  Read the article

< Previous Page | 288 289 290 291 292 293 294 295 296 297 298 299  | Next Page >