Search Results

Search found 25391 results on 1016 pages for 'update notification'.

Page 293/1016 | < Previous Page | 289 290 291 292 293 294 295 296 297 298 299 300  | Next Page >

• sata2 hdd not reported correctly on gigabyte mobo

  - by hyperboreean

  hey guys, I have a gigabyte ga-k8nmf-9 mobo which has both sata 1 and sata 2 support. Until a few hours ago I had a samsung 160gb sata 1 hdd which worked ok until it failed. I bought a wd se16 caviar, 500 gb, 7200 rpm, 16 mb cache, but it seems that it's not properly detected by my computer - it's only showing 137 GB out of 500. I tried a BIOS update (to F10e) and it's still doing the same thing. I've altered BIOS settings to use only sata (no ide) and many other settings, but nothing worked. Any help will be greatly appreciated Update on this one: it seems that the previous hdd was doing the same thing, though I didn't notice because it was approximately the same size

  Read the article

• Graphics hardware warning when updating to 14.04

  - by pacomet

  As I use Ubuntu at work I just update only LTS versions but now I'm not sure if I can/should. As my computer is now ten years old I would change if was mine but as it is owned by my employer I have to work with it. It's not a bad one, it runs fine (this was not true when still had Windows on it ;-). When updating to 14.04, it warns about possible bad/slow performance with Unity 3D so I stop updating as I am at work, not my own computer. As I understand from http://askubuntu.com/a/438958/25305 Nvidia Geforce FX 5500 graphics card is still supported in 14.04. Now, in 12.04, I have driver version 173 and unity 2d runs fine for me. output of /usr/lib/nux/unity_support_test -p OpenGL vendor string: NVIDIA Corporation OpenGL renderer string: GeForce FX 5500/AGP/SSE2 OpenGL version string: 2.1.2 NVIDIA 173.14.39 Not software rendered: yes Not blacklisted: no GLX fbconfig: yes GLX texture from pixmap: yes GL npot or rect textures: yes GL vertex program: yes GL fragment program: yes GL vertex buffer object: yes GL framebuffer object: yes GL version is 1.4+: yes Unity 3D supported: no Should I update? Is it better to stay with 12.04? Thanks

  Read the article

• Best way: restructure an existing Team Foundation Server (TFS) solution

  - by dhh

  In my department we are developing several smaller AddOns for some unified communication server. For versioning and distributed development we use a Team Foundation Server 2012. But: there is only one large TFS solution for all of our applications and libraries: Main Solution Applications App 1 App 2 App 3 Externals Libraries Lib 1 Lib 2 Tools The "Application" path contains all main applications. Those are not depending on each other, but they depend on the Libraries and Externals projects. The "Externals" path contains some external DLLs referenced in our Applications and Libraries. The Libraries path contains commonly used libs (UI templates, Helper classes, etc.). They do not depend on each other and they are referenced in the Libraries and the Tools projects. The Tools path contains some helper programs like setup helpers, update web services, etc. Now, there's some major points why I'd like to change this structure: We can't use server builds. It's uncomfortable to manage TFS scrum management with sprints, impediments, etc. with a solution structure like that. Every developer always has access to all projects in the solution. A complete build lasts too long if one accidentally hits [F6] in Visual Studio... What would you change in this solution? How would you break those projects into smaller Solutions, how should those solutions be structured. My first approach would be, to create one TFS project for each Application, Library and Tool. But how can I ensure that e.g. App 2 always contains the newest version of Lib 1? Do I have to monitor changes on Lib 1 and update App 2 manually as soon as the Lib changes? Or can I somehow force Visual Studio to always use the newest version of an external project somehow?

  Read the article

• How do I remove the tool tips on the launch bar?

  - by Sephethus

  The title is the question. These tool tips stay until I try to click past them. They're annoying since they constantly pop up and block the view of what I'm trying to do. Unfortunately I need the launch bar because Ubuntu is running on VMware and the console does not allow me to use the keyboard for switching tasks (to my knowledge). How do I disable them? I'd post an image as an example, but this site will not let me. UPDATE: unity 5.16.0 UPDATE 2: I discovered that this may only be a problem with users who run Ubuntu on a full screen VMware console that is situated on the right monitor. When the mouse is moved to the left monitor the tooltips popup and remain until the mouse is clicked twice in the VMware console window to make it active. Unfortunately my problem is one involving a rare situation I think. However, I'd love to be able to disable these tool tips if possible. It would also be nice if new features were added that can allow further customization of the launch bar.

  Read the article

• Acer Aspire One 725 - missing graphic card driver for Radeon HD 6290?

  - by Melon

  Recently I bought an Acer Aspire One 725 Netbook and installed Ubuntu 12.10 on it. I bought it, because it can run HD movies and has Full HD on external VGA port. However, movies from youtube have a really slow framerate. If you open three tabs in Opera (for example g-mail, youtube and askubuntu) it gets really laggy. My suspicion is that the driver for graphic card is missing. When I check the System->Details->Graphics the driver is unknown. After running lspci | grep VGA I get this output: 00:01.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Device 980a From what I see, I have a AMD C70 processor integrated with (or something similar) AMD Radeon HD 6290. Has anyone had the same problem? Do you know which drivers need to be installed for the graphics to work properly? On official Acer page there are only drivers for Win7 and Win8... Update: I have tried installing fglrx but I get the following error (either I don't have libraries or someone didn't make a clean build before release ;) /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c: In function ‘KCL_MEM_AllocLinearAddrInterval’: /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:2124:5: error: implicit declaration of function ‘do_mmap’ [-Werror=implicit-function-declaration] /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:2124:13: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c: In function ‘kasInitExecutionLevels’: /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:4159:5: error: ‘cpu_possible_map’ undeclared (first use in this function) /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:4159:5: note: each undeclared identifier is reported only once for each function it appears in /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:4159:5: warning: left-hand operand of comma expression has no effect [-Wunused-value] Update 2: After fixing the erros in compilation, ubuntu acts bizarre and unstable (no left icon panel, no upper panel, cannot run any programs, I only see desktop)

  Read the article

• Blank screen after grub menu

  - by Tim

  I just rebooted an Ubuntu Server 10.04. After choosing boot options in the grub menu, though, it just displays a black screen with the blinking white underscore in the upper-left corner. The machine has had (hardware) trouble with networking before, but the problem remains after 10 minutes, so I don't think it's the problem now. Booting into recovery mode or using earlier kernels yields the same problem. This also happens if I boot from another hard-drive. I haven't yet tried to boot from CD as the machine lacks a CD reader. How should I diagnose the problem? Update: My boot options are: recordfail insmod ext2 set root='(hd0,1)' search --no-floppy --fs-uuid --set 567[redacted] linux /boot/vmlinuz-2.6.32-29-generic root=UUID=567[redacted] ro quiet splash initrd /boot/initrd.img-2.6.32-29-generic Update: Also, I cannot access the virtual terminals (ctrl+alt+Fn).

  Read the article

• script to test mail server

  - by WebDude

  Ever since a windows update that took down my IIS6 mail server a few weeks back, I've been really paranoid about my mail server working. So every time I run a windows update I fire up command prompt and send myself a quick test mail. Like so: > telnet localhost 25 > helo domain.com > mail from: [email protected] > rcpt to: [email protected] > data some random body to mail myself . This is a realy great way to test my mail server, but it's a pain in the neck to do quickly. Is there anyway i can run this in a batch script or something as a quick test? I've tried a bat file but this just waits after i call telnet I've also explored if telnet accepts any input files and it does not seem to. What's the best way to do this?

  Read the article

• Missing swf plugin in Google Chrome [Ubuntu]

  - by Bakhtiyor

  How to play .swf file in Google Chrome? Because when I open .swf files it says Missing Plug-in. though when I open chrome://plugins it shows that it has Shockwave Flash plugin installed already. My OS is Ubuntu 10 and would be happy if some linux geek could suggest me solution of my problem. Thanks and sorry for stupid question. Update 1 Here is information about version of the applications I use: Chrome 5.0.375.70 (48679) Ubuntu Shockwave Flash 9.0 r999 Update 2 I have solved the problem by the following way: Opened Application Manager Synaptic Deleted all the packages concerning flash and swf Opened up Application Center Ubuntu Searched for flash It found Adobe Flash Plugin Installed that application

  Read the article

• How to prevent these executables from starting up?

  - by TomWij

  After removing the following executables from starting up, in the near future they reappear again: DDMService.exe: Re-enabled when visiting a DivX video online. DivXUpdate.exe: Re-enabled when visiting a DivX video online. GoogleUpdate.exe: Re-enabled task, I think by Google Chrome? I see no auto-update option. iPodService.exe: Re-enables after starting iTunes. iTunesHelper.exe: Re-enables after starting iTunes, useless on SSDs. Reader_sl.exe: Re-enables when updating Adobe Reader, useless on SSDs. It bores me that these processes keep popping back up, while my software functions well without them. I'm smart enough to update the software weekly through FileHippo so I don't need automatic updates. What can I do to never see these processes again? Even after reinstallation of those applications... A general solution is also welcome! :-)

  Read the article

• returning null vs returning zero, which would be better?

  - by Dark Star1

  I inherited a project that I am managing and having to maintain pending the redevelopment of the code base. At the moment I am being tasked with adding little feature all over the place and have gotten into the habit of returning null instead of zero in parts of the code where I am working on. The problem is we have a client that is using this code and parts of code that require data from my implemented features recieve a null and dump the stack trace in UI. I would like to avoid this entirely from my input but without the nullPointer exceptions there's the potential that errors would be introduced into the client's data which may go un-noticed. Usually I would have come up with my own error notification system but I have never inherited a project before. so I am unsure whether to continue down this path. I still believe that the stack dump is preferable to un-noticed data corruption/inaccuracies.

  Read the article

• Own website fails to load first time

  - by AmazingDreams

  I have a website running on a VPS, every time I first try to load the website the connection times out. If I press try again, it loads directly. I'm not sure whether this is a DNS issue or a server issue. As far as I know everything is set up correctly. Also, it has been doing this from the moment I got this server and set up my domain name. And that's about two to three months ago. You may take a look here: http://www.wegotcha.nl/ As you can see at this moment it's just an image, there are no scripts running in the background or anything. The only error Apache gives me is that favicon.ico cannot be found. It's an Apache webserver running on Ubuntu 12.04.1 (newest version) I update all packages almost every day (apt-get update && apt-get upgrade). I am merely an amateur on the area of webservers so any help will be appreciated. :)

  Read the article

• Amazon EC2 Elastic Load Balancing - strategy for zero downtime server restart

  - by Yoga

  I have 5 web servers (Apache/mod_perl) behind Amazon EC2 Elastic Load Balancing, when I deploy codes to the web servers, I am doing this.. For each machine, shutdown the Apache Update the code Start over the server and proceed to the next server I think when my server is shutdown, ELB will not distribute request to my server, but how about the request still serving? I think a better approach is Stop accepting new request from ELB Sleep for sometimes, shutdown web server only if all requests are responded Update the codes Start the server again But how to perform (1) and (2) from my local sever? Do I need to use AWS API? or other easy way to do it? Thanks.

  Read the article

• Windows Services don't automatically start after reboot?

  - by James Crowley

  We've got some Windows services written in .NET. They start fine manually within the services mmc, but despite being set to Automatic, they never start when powering on (or rebooting) the machine. Update In the event log, instead of seeing "xyz started", alongside all the other services starting, I just see "The xyz service entered the stopped state." and a seperate error that says "A timeout (30000 milliseconds) was reached while waiting for a transaction response from the slsvc service.". If I manually start them, then I get a normal in the event log as expected, and all is fine - until the next Windows Update patch which forces a reboot and all the services are off again. Any ideas? I've tried setting them to Delayed Start with no apparent difference.

  Read the article

• Should one use a separate database for application data and user data?

  - by trycatch

  I’ve been working on a project for a little while and I’m unsure which is the better architecture. I’m interested in the consensus. The answer to me seems fairly obvious but something about it is digging at me and I can't pick out what. The TL;DR is: how do you handle a program with application data and user data in the same DB which needs to be able to receive updates to the application data periodically? One database for user data and one for application, or both in one? The detailed version is.. if an application has a database which needs to maintain application data AND user data, and the user data all references application data, it feels more natural to me to store them in the same database. But if there exists a need to be able to update the application data within this database periodically, should this be stripped into two databases so that one can simply download the updated application data database file as an update and replace the old one? Or should they remain as one database, and the application data be updated via a script which inserts the new data into the existing database? The second sounds clearly preferable to me... but for some reason just doesn’t feel right, and I can't pick out quite why.

  Read the article

• FTP server questions

  - by Brad

  I'm currently trying to set up a home FTP server using debian and proftpd and I've run into a problem that has me confused. I have most things set up already, I believe, but I cannot access my ftp server using my external ip. I've forwarded the correct port on my router and I've checked http://www.yougetsignal.com/tools/open-ports/ to be sure that it is, in fact, opened. I've used telnet locally on my server to check that the port accepts connections. I am able to use ftp via LAN. But, I still cannot access anything externally. I'm thinking that there's still some router configuration to be done in order to fix this, such as routing all connections on my ftp port to my server via the internal ip, but I can't find any option on my router to do this. Is this a necessary step? There is an option to use DMZ hosting, but I'd rather avoid it if possible. I can provide additional information as requested, please let me know any information that you think could help at all. Thanks. -Brad PS - I have a Telus Actiontec Modem/Router Update - !! Trying my ftp server out at work, worked! I guess I did set it up correctly after all. What is confusing me, though, is why doesn't the server allow me to connect locally anymore? That seems very weird to me. Also, I don't really understand why I am denied outright if I attempt to connect from the same network using the external address. I'll look into it more when I get home, but thank you guys for your help. Update 2 - I found the problem with not being able to connect locally anymore. I was setting the masquerade address to my external IP and for some reason that was causing it to hang on MLSD when I connected using my LAN address. I've removed the masquerade address and I'm going to check if I need it at work tomorrow. I'll update this page if I find anything.

  Read the article

• Are Java's public fields just a tragic historical design flaw at this point?

  - by Avi Flax

  It seems to be Java orthodoxy at this point that one should basically never use public fields for object state. (I don't necessarily agree, but that's not relevant to my question.) Given that, would it be right to say that from where we are today, it's clear that Java's public fields were a mistake/flaw of the language design? Or is there a rational argument that they're a useful and important part of the language, even today? Thanks! Update: I know about the more elegant approaches, such as in C#, Python, Groovy, etc. I'm not directly looking for those examples. I'm really just wondering if there's still someone deep in a bunker, muttering about how wonderful public fields really are, and how the masses are all just sheep, etc. Update 2: Clearly static final public fields are the standard way to create public constants. I was referring more to using public fields for object state (even immutable state). I'm thinking that it does seem like a design flaw that one should use public fields for constants, but not for state… a language's rules should be enforced naturally, by syntax, not by guidelines.

  Read the article

• Is there a "restore point" in Linux (Debian/Ubuntu) like Windows?

  - by Somebody still uses you MS-DOS

  I'm working directly in an Ubuntu Virtual Machine (VM). Some updates (like kernel) were available at the update manager. If I weren't using a VM, I wouldn't update it since it's a risk to break something. Since it's a VM, you can create a Snapshot or export an appliance and restore if something goes wrong. Suppose I'm not using a VM with a Debian/Ubuntu installation. Is there a install-restore approach that doesn't depend in a VM configuration to restore your system exactly before an upgrade (Like a "Restore Point" in Windows), being easy to restore like a VM appliance? (I'm not looking for "ghost images" or something like that (Norton Ghost, Clonezilla, etc), I'm looking for something builtin in the Linux System)

  Read the article

• Statsd, Graphite and graphs

  - by w00t

  I've setup Graphite and statsd and both are running well. I'm using the example-client.py from graphite/examples to measure load values and it's OK. I started doing tests with statsd and at first it seemed ok because it generated some graphs but now it doesn't look quite well. First, this is my storage-schema.conf: pattern = .* retentions = 10:2160,60:10080,600:262974 I'm using this command to send data to statsd: echo 'ssh.invalid_users:1|c'| nc -w 1 -u localhost 8126 it executes, I click Update Graph in the Graphite web interface, it generates a line, hit again Update and the line disappears. If I execute the previous command 5 times, the graph line will reach 2 and it will actually save it. Again running the same command two times, graph line reaches 2 and disappears. I can't find what I have misconfigured. The intended use is this: tail -n 0 -f /var/log/auth.log|grep --line-buffered "Invalid user" | while read line; do echo "ssh.invalid_users:1|c" | nc -w 1 -u localhost 8126; done

  Read the article

• configuring default PYTHONPATH

  - by Shan

  I have Django application and few Django commands that I would execute through cronjobs on CentOS 5. Recently I updated my python-setuptools package, which in-turn update python-devel packages. After performing this update, the default PYTHONPATH settings for the Django commands executed through cronjob are different from the Django application which I execute from shell. Because of this mismatch my old Django cronjobs fail since the required libraries are not in path. How do I resolve this issue and ensure that both the cronjob Django commands and the Django application have the same environment?

  Read the article

• How to use AD/GPO/Print Services to "push out" a new printer driver to replace a broken one? How did my server get a broken driver?

  - by Zac B

  Context: We have an AD/GPO-managed corporate network with a little over a hundred PCs running Windows 7 x64, and a few managed printers. Our Server2008R2 primary domain controller is configured as a print server for them all. Problem: After a recent windows update and restart (no printer driver updates were included) on the DC, a particular shared printer (Lexmark T650) has begin exhibiting some strange behavior. First, it prints a preceding and following blank page for almost every document, on jobs submitted by about half of client machines (no separator page is configured on the server or any of the clients I've seen). Second, whenever someone tries to access "Printing Preferences" on any client, they recieve the following error message (this happens everywhere, 100% of the time, and didn't happen before the update on the DC): Once they click "OK", the prefs screen appears (with no separator page selected) and everything seems fine. I'm not even sure if these two issues are related, but everyone seems affected by one or both of those issues. What I've Tried: I've been hesitant to un-deploy the problem printer, or remove it via GPO, as it's pretty heavily used. I've tried updating (via MS update and our internal WSUS server) client machines and the DC. No printer driver updates have appeared, and no number of updates or restarts on the server or the client seems to have achieved anything other than my boss getting grumpy that I'm bouncing the domain controller so often. I've tried deleting the drivers on the server, and re-installing them from the original source that has worked for the past year...no change. I've tried selecting "New Driver" for one of the shared printers on a client machine, running as domain admin, and pushed the latest driver found by MSupdate back up to the DC. This changed the version number of the driver recorded in the print server manager, but caused no change--on the client I pushed from, or on any other. The error still appears. Question: Why the heck is this happening? Obviously, I got a bad driver from somewhere, but how do I get rid of it? I don't know of any "roll back drivers" functionality for centrally managed print drivers like Windows offers for other devices. How would I a) get this issue resolved on a client, and b) push the fix to the other members of the domain?

  Read the article

• How to install Gyachi on ubuntu 12.10 [Solved]

  - by Oguz Can Sertel

  ok ... there is no way to install it on ubuntu 12.10 I would like to use Gyachi on ubuntu 12.10. I tried these steps but it doesn't work.. I wanted to compile it myself... but it need some libs... it made me confused... so I gave up sudo add-apt-repository ppa:adilson/experimental sudo apt-get update sudo apt-get install gyachi Thank you for your helps at first command the output: sudo add-apt-repository ppa:adilson/experimental You are about to add the following PPA to your system: Contains packages that are not in the official Debian/Ubuntu repositories and newer versions and snapshots which are not available yet in the repositories. Theses packages are experimental. Use them at your own risk. More info: https://launchpad.net/~adilson/+archive/experimental Press [ENTER] to continue or ctrl-c to cancel adding it gpg: keyring `/tmp/tmp3y3i7p/secring.gpg' created gpg: keyring `/tmp/tmp3y3i7p/pubring.gpg' created gpg: requesting key 27B81625 from hkp server keyserver.ubuntu.com gpg: /tmp/tmp3y3i7p/trustdb.gpg: trustdb created gpg: key 27B81625: public key "Launchpad Experimental Packages PPA" imported gpg: Total number processed: 1 gpg: imported: 1 (RSA: 1) OK and after sudo apt-get update; this is (sudo apt-get install gyachi)'s output here is the output: sudo apt-get install gyachi Reading package lists... Done Building dependency tree Reading state information... Done E: Unable to locate package gyachi

  Read the article

• nginx rewrite rule to convert URL segments to query string parameters

  - by Nick

  I'm setting up an nginx server for the first time, and having some trouble getting the rewrite rules right for nginx. The Apache rules we used were: See if it's a real file or directory, if so, serve it, then send all requests for / to Director.php DirectoryIndex Director.php If the URL has one segment, pass it as rt RewriteRule ^/([a-zA-Z0-9\-\_]+)/$ /Director.php?rt=$1 [L,QSA] If the URL has two segments, pass it as rt and action RewriteRule ^/([a-zA-Z0-9\-\_]+)/([a-zA-Z0-9\-\_]+)/$ /Director.php?rt=$1&action=$2 [L,QSA] My nginx config file looks like: server { ... location / { try_files $uri $uri/ /index.php; } location ~ \.php$ { fastcgi_pass unix:/var/run/php5-fpm.sock; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include fastcgi_params; } } How do I get the URL segments into Query String Parameters like in the Apache rules above? UPDATE 1 Trying Pothi's approach: # serve static files directly location ~* ^.+\.(jpg|jpeg|gif|css|png|js|ico|html)$ { access_log off; expires 30d; } location / { try_files $uri $uri/ /Director.php; rewrite "^/([a-zA-Z0-9\-\_]+)/$" "/Director.php?rt=$1" last; rewrite "^/([a-zA-Z0-9\-\_]+)/([a-zA-Z0-9\-\_]+)/$" "/Director.php?rt=$1&action=$2" last; } location ~ \.php$ { fastcgi_pass unix:/var/run/php5-fpm.sock; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include fastcgi_params; } This produces the output No input file specified. on every request. I'm not clear on if the .php location gets triggered (and subsequently passed to php) when a rewrite in any block indicates a .php file or not. UPDATE 2 I'm still confused on how to setup these location blocks and pass the parameters. location /([a-zA-Z0-9\-\_]+)/ { fastcgi_pass unix:/var/run/php5-fpm.sock; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME ${document_root}Director.php?rt=$1{$args}; include fastcgi_params; } UPDATE 3 It looks like the root directive was missing, which caused the No input file specified. message. Now that this is fixed, I get the index file as if the URL were / on every request regardless of the number of URL segments. It appears that my location regular expression is being ignored. My current config is: # This location is ignored: location /([a-zA-Z0-9\-\_]+)/ { fastcgi_pass unix:/var/run/php5-fpm.sock; fastcgi_index Director.php; set $args $query_string&rt=$1; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include fastcgi_params; } location / { try_files $uri $uri/ /Director.php; } location ~ \.php$ { fastcgi_pass unix:/var/run/php5-fpm.sock; fastcgi_index Director.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include fastcgi_params; }

  Read the article

• Ad networks that will serve via HTTPS?

  - by Dogweather

  I've built a website with 160K page views per month that serves every page over HTTPS. The recent FireSheep news will probably increase the adoption of "HTTPS everywhere" but it's been very hard to find ad networks and affiliates that will serve their content via HTTPS. I don't want to use these because I don't want my visitors to get "broken security" notification from their browsers (and of course, relevant ads would be a leak of private information). I'm tired of spending a ton of time signing up with ad networks and affiliates only to find out down the road that they don't support HTTPS (e.g. AdSense). Can anyone suggest any options or provide a pointer to a list of these somewhere?

  Read the article

• Asus A8V overcurrent

  - by user139710

  This is not as much as a question as it is a note to those out there that upgrade their motherboards with better processors and the like. Here's my story. Recently I upgraded my processor. System specifications: • Asus A8V Deluxe • 4GB RAM • ATI Radeon 3870 AGP graphics card (I believe that's it) Anyway, I decided to put a dual core Opteron 180 in this rig, but the problem was that I needed to update the BIOS to V-1017, and not knowing the consequences, I went up to the Asus site and got the newest, the latest and the greatest, 1018.002 thinking that it was the best for this board, however it wasn't. I used the Asus EXFlash, which makes life a lot easier, flashed the BIOS and all of a sudden I start getting this message: USB overcurrent protection, system shutting down in 15 seconds to protect your system. WELL SHIT... This is a new one on me... I read the blogs, all the posts on this thing, and did all that everyone else did to correct the problem, but nothing helped. So i decided to start from square one, went back to Asus and looked at the BIOS download... OMG... IT WAS A BETA. So, I downloaded the update that was suggested 1017< and installed it and wouldn't you know, it took care of the problem, no more USB overcurrent protection, no more crashing. I write this today to let you all know about this, just in case you have an issue such as this. Well there you all go. Fly safe and eat your vegetables.

  Read the article

• Neverending issues with grub (ubuntu 14.04 on ASUS with Win8 dual boot)

  - by Mariana

  This is the most frustrating issue I have ever run into using Ubuntu and Windows in the same machine. I have an ASUS K46CB, 6GB RAM and preinstalled Windows 8.1 64-bits. I have successfully installed Ubuntu 14.04 LTS, also 64-bits. To do so,I followed this tutorial whenever possible. I only failed on the disable secure boot part: there is no 'Secure-boot' or even UEFI mention in my BIOS! Screenshots from other BIOS of the same model show the option under Boot, but in mine there is absolutely none. Because of this, I cannot boot into Ubuntu. The computer loads straight into Windows. I tried running boot repair, but got an error (i can show the log, but it's pretty long). Does anyone know how to fix this issue? UPDATE I reinstalled Ubuntu. Same problem, goes straight to Window. Boot-Repair informs me that i am using Windows in Legacy mode. It excecuted with no errors this time, but after restarting GRUB was still missing. I can't turn off Secure Boot yet. UPDATE I tried using Boot Repair to install grub on a boot-grub 1mb partition. Still boots straight to windows. I feel like punching something

  Read the article

< Previous Page | 289 290 291 292 293 294 295 296 297 298 299 300  | Next Page >