Search Results

Search found 13454 results on 539 pages for 'left'.

Page 294/539 | < Previous Page | 290 291 292 293 294 295 296 297 298 299 300 301  | Next Page >

• PC shuts down when installing ubuntu?

  - by Robin002

  I'm now using ubuntu from USB, and I'd like to install ubuntu on my hard disk. I tried the option of removing Vista while installing ubuntu. However, near the end of the installation process (presumably the end because I can see some slideshows on how to start using ubuntu), the screen suddenly goes to black with white words running around on it. Soon the computer shuts down. After that, restarting leads to a black screen with only a small white cursor on the top left corner. The cursor keeps blinking and nothing happens. I found that I can alternatively choose to boot with USB by hitting F12 just when the computer starts. So I tried to reinstall ubuntu by running ubuntu on USB. One of the options of installation is to update ubuntu 11.04 to ubuntu 11.04, so it seems the ubuntu is already installed somehow. Anyways, I tried both update and delete and install option but the same thing happens as the 1st time (sometimes before reaching the end), while I still cannot start my PC as ubuntu (without USB). How may I install ubuntu properly?

  Read the article

• How can I make my browser(s) finish AJAX requests instead of stopping them when I switch to another page?

  - by Tom Wijsman

  I usually need to deal with things on a page right before switching to yet another page, this ranges from "liking / upvoting a comment or post" up to "an important action" and doesn't always come with feedback on whether the action actually proceeded. This is a huge problem! I assume the action to proceed once I start the particular AJAX request, but because I switch to another page it didn't actually happen because the AJAX request got aborted. This has left me several times with coming back to the page and seeing my action didn't take place at all; to give you an idea how bad this is, this even happened once when commenting on Super User! Is there a way to tell my browser to not drop these AJAX connections but simply let them finish?

  Read the article

• Workflow: Deploy Operating Systems

  - by Owen Allen

  The Deploy Operating Systems workflow is a workflow document that we added recently. It shows you how to get operating systems up and running in your environment. It's mostly linear, but it's a bit more complicated than some of the others. It's built around a pair of images. In both images, the left side shows the prerequisites for the whole process. Before you can deploy operating systems, you have to have Ops Center fully installed, with libraries set up and hardware already discovered. Once you've done that preparation, the first image walks you through all of the OS deployment steps. First you discover existing operating systems, then you provision Oracle Solaris 10 or Oracle Solaris 11. If you're not planning on using virtualization, then your deployment is done, and you're directed to the operate workflows. If you are interested in virtualization, though, you go on to the second image: The second image walks you through deploying virtualization, sending you to the Deploying Oracle Solaris 10 Zones, Deploying Oracle Solaris 11 Zones, or Deploying Oracle VM Server for SPARC workflows, depending on what kind of virtualization you're planning on using. Once you've done that, you're ready to go on to the operation workflows.

  Read the article

• Is embedded programming closer to electrical engineering or software development?

  - by Jeremy Heiler

  I am being approached with a job for writing embedded C on micro controllers. At first I would have thought that embedding programming is to low on the software stack for me, but maybe I am thinking about it wrong. Normally I would have shrugged off an opportunity to write embedded code, as I don't consider myself an electrical engineer. Is this a bad assumption? Am I able to write interesting and useful software for embedded systems, or will I kick myself for dropping too low on the software stack? I went to school for computer science and really enjoyed writing a compiler, managing concurrent algorithms, designing data structures, and developing frameworks. However, I am currently employed as a Flex developer, which doesn't scream the interesting things I just described. (I currently deal with issues like: "this check box needs to be 4 pixels to the left" and "this date is formatted wrong".) I appreciate everyone's input. I know I have to make the decision for myself, I just would like some clarification on what it means to be a embedded programmer, and if it fits what I find to be interesting.

  Read the article

• What is the main reason for ADSL modem/routers dying?

  - by ldigas

  The other day my home ADSL modem/router (dwg 684t in this case) died. A guy from the telecom company came to my place and brought another one, but he also left this one. Now, I'm interested - it didn't fall, it wasn't electrocuted - but it just doesn't work. What could be the problem? Can it be fixed? Is it worth it (in which case I would have two which is always nice)? I'm not looking for a definite opinion, just your personal advice ... (although in the end I think I'm going to archive it in the "cylinder register") What are the usual problems that occur with them? In this case, I can connect to the router, I can see its settings, I just can't connect to the Internet. With the new one everything works. Weird.

  Read the article

• Commenting on Commits

  The source code experience on CodePlex just got more social. Now, you can comment directly on a commit when viewing a project’s source code history. This feature acts as a nice compliment to the existing ability to comment on a pull request's commits. To get started with this feature, navigate to the commit you are interested in from the source tab. As you hover over the line you would like to comment on, an icon to add a comment will appear to the left. Click on the icon, and comment away!     Once you comment on a line, the person who committed the change and anyone involved in the conversation will be notified of the comment by email. Have ideas on how to improve CodePlex? Please visit our suggestions page! Vote for existing ideas or submit a new one. As always you can reach out to the CodePlex team on Twitter @codeplex or reach me directly @Rick_Marron.    

  Read the article

• Table Formatting in Excel 2007: How do I remove it?

  - by RocketGoal

  I've used the new Table Formatting option in Excel 2007. Now I can't remove it. I've dragged the little blue square up to the last cell on the top left, but it just won't go any further. In fact it just won't go at all. Clear all doesn't remove it. What does? I want my table back! I'm not a beginner with Excel, but this little annoyance has made me feel like on. Surely there must be some way to remove table format without deleting something or clearing all! Thanks Mike

  Read the article

• Oracle BI Mobile Security Toolkit For iPad Available for Download

  - by Mike.Hallett(at)Oracle-BI&EPM

  Normal 0 false false false EN-GB X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Oracle BI Mobile Security Toolkit for Apple iPad is now available for download from the Oracle Technology Network here. This toolkit provides the ability to generate a signed version of the Oracle BI Mobile HD application; making use of Apple’s Xcode and the IOS SDKs. With this, partners and customers can get the unsigned, unpacked version of the Oracle BI Mobile app, and combine it with a third-party mobile security vendor of your choice to create a more secure, “containerized” version of Oracle BI Mobile.

  Read the article

• Unable to remove/hide icons from desktop folder

  - by Kyomu

  I wish to hide some windows icons from my desktop folder1, but cannot. When I click delete, it says they will be deleted from my desktop (which they already are), but they remain visible in the desktop folder, which is where I wish them removed. Is there any way I can remove these? (I always use Win+E which really lets me get to all of these easy enough). Offending icons: Libraries, Homegroup, User folder, Computer, Network, Control Panel, and Recycle Bin. For those who might be wondering why, I find myself in this folder a bit to often (including when uploading a file), and find these nothing but clutter, especially as these always default to the top. Thanks for your help! 1 By desktop folder, I mean the folder you would see by going to "My Computer" and clicking "Desktop" on the top left under Favorites. Note: Changing my "Desktop Icon Settings" under "Personalize" does not affect the desktop folder, but rather just the desktop view.

  Read the article

• how to use double buffering in awt? [on hold]

  - by Ishanth

  import java.awt.event.*; import java.awt.*; class circle1 extends Frame implements KeyListener { public int a=300; public int b=70; public int pacx=360; public int pacy=270; public circle1() { setTitle("circle"); addKeyListener(this); repaint(); } public void paint(Graphics g) { g.fillArc (a, b, 60, 60,pacx,pacy); } public void keyPressed(KeyEvent e) { int key=e.getKeyCode(); System.out.println(key); if(key==38) { b=b-5; //move pacman up pacx=135;pacy=270; //packman mouth upside if(b==75&&a>=20||b==75&&a<=945) { b=b+5; } else { repaint(); } } else if(key==40) { b=b+5; //move pacman downside pacx=315; pacy=270; //packman mouth down if(b==645&&a>=20||b==645&&a<=940) { b=b-5; } else{ repaint(); } } else if(key==37) { a=a-5; //move pacman leftside pacx=227; pacy=270; //packman mouth left if(a==15&&b>=75||a==15&&b<=640) { a=a+5; } else { repaint(); } } else if(key==39) { a=a+5; //move pacman rightside pacx=42;pacy=270; //packman mouth right if(a==945&&a>=80||a==945&&b<=640) { a=a-5; } else { repaint(); } } } public void keyReleased(KeyEvent e){} public void keyTyped(KeyEvent e){} public static void main(String args[]) { circle1 c=new circle1(); c.setVisible(true); c.setSize(400,400); } }

  Read the article

• Why does compressing and decompressing my SSD hard drive free up space?

  - by Paperflyer

  I bought an SSD (SandForce 2), created a tiny 25GB partition on it for Windows and installed Windows 7 64-bit. In order to free disk space, I enabled compression on the drive using the Properties entry in the context menu for the drive in Explorer. Prior to compressing I had around 5GB of free space. After compression I had 4GB, so compression was not working for me. I figured this might have happened because of the built-in data compression of the SSD. I decompressed the files again - after decompression, it left me with 7GB of free space! Better yet, after restarting, I had 10GB. What is happening here?

  Read the article

• Workspace Issues on ubuntu 12.10

  - by JaySch

  I'm having the following problem with 12.10 Unity running on a Toshiba A505 16" display laptop using an external 24" Samsung LED monitor (resolution 1920 x 1080 (16:9). Also using the default 2 x 2 workspaces: After powering up the laptop, I Click the Workspace Switcher and the 4 images which represent Workspace 1, Workspace 2, Workspace 3, and Workspace 4 are visible but are in a very elongated, stretched out aspect ratio. Also, any desktop icons placed on the left side of the screen don't show up when I go to full view on any of the 4 workspaces. To resolve this issue, I open up the laptop lid until the video display switches from the external Samsung LED monitor to the internal laptop display, which renders the four workspaces perfectly. I then close the laptop lid and now the workspaces display the correct aspect view; both in the workspace switcher thumbnail view an in full view. I can now see the full desktop, including any desktop icons. Is there a way to configure my system so that Workspaces work properly when the laptop is connected to an external monitor without having to open and close my laptop? Thank you.

  Read the article

• Map keys in Vim

  - by efficiencyIsBliss

  I want to map e to mean end of line. I tried the following mapping in my vimrc: map $ e $ is the default end of line command. However, this doesn't work. I'm wondering what the problem is. Also, I want to map Alt+right/left arrow to navigate words. So, for example, Alt+right arrow would take me to end of word. This command is currently mapped to e. Any tips on how I would go about doing this? Thanks!

  Read the article

• Server freeze restarted quickly so how do I fiond what went wrong?

  - by Charlie

  I have a SQL SERVER DB running on a windows server 2008 (VMWare) Yesterday I could not RDP to it so I ended some RDP sessions which were left logged in. This seemed to solve the problem. However last night I learned that the DB was inaccessible and unresponsive to customers. My colleague checked the server but again is unable to create an RDP connection. He then restarted the server and since it has been fine. Looking at the CPU Readings of the Server it spiked up to 100% before the original RDP problem .After I ended the extra seeions uit again dropped down to normal levels however before the time of the customer complaint it had rose to 100% again - before it had to be restarted. Is there anyway I can investigate which processes may have caused the problem in the first place. Would there be some kind of memory dump from when it was restarted. I would prefer to find out what is wrong now instead of waiting until it happens again.

  Read the article

• Why is my USB data transfer so slow?

  - by Dave M G

  Whenever I do any kind of file transfer using USB, whether to a USB stick, or with my Android phone, or anything else, it is ridiculously slow. It says 59.8 KB/sec, which would be an awesome speed if this were 1991 and I was using a modem to dial up to my local BBS. Surely USB technology is better than that...? 37 seconds to move less data than the equivelent of 1 MP3 file? Also, regardless of what it says about speed and time, the reality is much, much slower. I routinely see it say something like "37 seconds left" and have to wait for minutes. Sometimes, if I want to move large amounts of files, it can say it will take 8 hours or more. Is this normal? My computer may not be the most awesome on the market, and about a year old, but it's an i5 with 4GB RAM and modern components, so surely this isn't the hardware's fault. What can I do to get better USB data transfer performance? Also, I did look at this question, but my newbie eyes don't see anything that look like an actual solution, just a lot of discussion about what transfer rates could or should be. Update: As requested in the comments, I've generated a whole bunch of output from the command line, and put it on Ubuntu Pastebin. Please see it here.

  Read the article

• How should I compress a file with multiple bytes that are the same with Huffman coding?

  - by Omega

  On my great quest for compressing/decompressing files with a Java implementation of Huffman coding (http://en.wikipedia.org/wiki/Huffman_coding) for a school assignment, I am now at the point of building a list of prefix codes. Such codes are used when decompressing a file. Basically, the code is made of zeroes and ones, that are used to follow a path in a Huffman tree (left or right) for, ultimately, finding a byte. In this Wikipedia image, to reach the character m the prefix code would be 0111 The idea is that when you compress the file, you will basically convert all the bytes of the file into prefix codes instead (they tend to be smaller than 8 bits, so there's some gain). So every time the character m appears in a file (which in binary is actually 1101101), it will be replaced by 0111 (if we used the tree above). Therefore, 1101101110110111011011101101 becomes 0111011101110111 in the compressed file. I'm okay with that. But what if the following happens: In the file to be compressed there exists only one unique byte, say 1101101. There are 1000 of such byte. Technically, the prefix code of such byte would be... none, because there is no path to follow, right? I mean, there is only one unique byte anyway, so the tree has just one node. Therefore, if the prefix code is none, I would not be able to write the prefix code in the compressed file, because, well, there is nothing to write. Which brings this problem: how would I compress/decompress such file if it is impossible to write a prefix code when compressing? (using Huffman coding, due to the school assignment's rules) This tutorial seems to explain a bit better about prefix codes: http://www.cprogramming.com/tutorial/computersciencetheory/huffman.html but doesn't seem to address this issue either.

  Read the article

• How to configure Notepad++ (Scintilla) to write below EOF after EOL [on hold]

  - by Piotr Piaseczny

  Is it possible to configure scintilla to "brake" EOL/EOF while writing ? Now, if I want to begin writing in a column after EOL, I use ALT+left mouse button and start typing after click. No idea how to begin writing below EOF. Pressing Enter key many times is the only method now. Other explanation: If You open a new document, doesnt matter what kind of (php/txt etc) all You have is just one line. If You want to write in line 5 - must press Enter 5 times. Every other editor I know (IDE in Builder C++/MultiEdit) "ignore" eof and you can write anywhere in document. Because of php/html I've found notepad++ as a best editor but I'd like to "brake" limitations of (probably) scintilla

  Read the article

• Why OpenDialog.py don't work on Jotty application

  - by venerable13

  I'm a Python beginner, I installed quickly, I wrote a "quickly tutorial" in terminal and I did all the steps before at: "However, the application is not complete. There are a few things left for you to do:" All the next steps aren't finished yet because when I use open dialog and select one of the files saved, the content of the file isn't showed on "textview1", Why? Only is deleted the content written. Before if was used without dialog works great. SaveDialog.py work great. -def on_mnu_new_activate(self, widget, data=None) don't work neither. -If I use the bold lines by the others don't work. ###def open_file(self, widget, data=None): def on_mnu_open_activate(self, widget, data=None): ###def save_file(self, widget, data=None): def on_mnu_save_activate(self, widget, data=None): To view the code, go to the link above, unrar the archive, install "quickly" if you don't have it yet, place inside on jotty directory, then put "quickly run", "quickly edit", "quickly design", depending what do you want to do. Code - problematic code with OpenDialog implemented. Code-part1 - works OK, but without OpenDialog. I need principally that OpenDialog function work great.

  Read the article

• Ubuntu install can't find hard drives

  - by Casey Hungler

  I recently got a Dell Inspiron Special Edition 7720 computer. I am trying to install Ubuntu along side Windows. When I use the WUBI installer, the installation of Ubuntu works as long as I do not boot into Windows; if I boot into Windows, when I go back into Ubuntu, I am given a variety of error messages which claim to have corrupt or missing kernel/root directory, etc. I have been working with this problem for about a week, and have reinstalled Ubuntu MANY times. So far, I have eliminated all of the following problems: Corrupt WUBI installation (Downloaded multiple times, used on other systems), I have tried using a CD and a flash drive, both of which work on other computers. I know that no program within Ubuntu is creating the problem. I know that others have successfully installed Ubuntu on a computer with my operating system (Windows 7 SP1). This is a much shortened version of the original question, which has been up for about 5 days, and included a more detailed description of the problem, but left everyone clueless as to the source of this problem. When I spoke with the Dell service technician who came over today to replace my keyboard, he suggested that the driver for my HDD was so new that it was not compatible with the current version of Ubuntu. His reasoning is as follows: 1) During an install from a flash drive or CD, where I am supposed to get the option to wipe my system or create a dual boot, I get a window that asks me to select a hard drive partition, but none are listed. 2) This model of computer was made public in June of this year, while Ubuntu was released in April Adopting this theory, it would seem to me that the WUBI install fails after booting into Windows because Ubuntu can no longer find the files that it needs to load. Does this theory seem at all plausible to anyone? I just want to install Ubuntu and have it stay on my computer. I don't care how I put it there, I just need it to work, so I would TRULY appreciate any advice or suggestions anyone could give. Thanks so much for your time and support!!!

  Read the article

• Picasa 3 - All 88 'people' folders are empty - can I restore the files?

  - by rogerbid

  My wife uses Picasa 3 on her laptop, and has a problem. She has no idea how it happened but somehow the left hand panel in the Picasa 3 window shows "People (88)" but listed below it are the 88 names each with "(0)" alongside. No thumbnails show up for any of the 'people'. I have looked through all the menus and can see nothing that seems relevant and a search on this website has been fruitless too. Can anyone please tell me how I can correct this situation? FYI I backed up the laptop to a portable hard drive a few days ago (using Windows Backup and Restore) and wonder if this can be used to restore the database.

  Read the article

• What packages are safe to uninstall to reduce installation size?

  - by mathematician1975

  This question is similar to a previous question I asked How can I turn my desktop Ubuntu 8.04 into a command line only install?. I was wondering if anyone can recommend any other bulky packages from the standard 8.04 installation that can reduce the size on disk of my installation. All I really require is socket functionality, g++ and gcc, some kind of text editor and SSH client and server. Things that I don't require are things like media players, audio packages, and the more "superficial" kind of desktop niceties. Is there anything particularly large in a standard install that is safe for me to remove without compromising my requirements above? I am a bit apprehensive about trying to uninstall items and I am not totally confident about removal of particular things having a negative effect on the functionality of any other things I might need (an example is would it be safe for me to remove everything to do with Perl, or does the system/kernel/other processes require this) ??? Basically I would like to be left with the kind of items that would have been installed in the CLI version of 8.04 (had the alternative iso image not been faulty). Any help/suggestions would be gratefully received.

  Read the article

• Do I need to reserve space before installing Ubuntu alongside Windows 7?

  - by CRM Junkie

  I had Windows 7 32 bit on my existing system, but I am planning to install Ubuntu alongside it. So, I just decided to do a fresh installation of both the operating systems. When I insert the Windows 7 DVD, I can create 3 partitions at maximum, with one being the one where Windows 7 will be installed. I just wanted to know – do I need to keep some un-partitioned space for Ubuntu to install? By "unpartitioned space" I mean the space left after creating 3 partitions for Windows 7. I have a 500 GB HDD, so the three partitions I would be creating are 120 GB, 120 GB and 120 GB. The rest is shown as some logical drive, is that unpartitioned space? Can I install Ubuntu over there? I am pretty sure the space shown as logical won't be available as drives when I log into Windows 7. Is that space lost or can I use that to install ubuntu?

  Read the article

• Underlying Concept Behind Keyboard Mappings

  - by ajay

  I am frustrated with key mapping issues. On my Linux box, if I type Home/End in Vim, then the cursor actually moves to the beginning/end of the line. On my Mac when I am on TextEdit, if I do Fn + Left or Fn + Right, it takes me to beginning/end of the line. But if I am on Vim on my Mac terminal, then the same key combinations don't work. Why? I see online all the different cryptic settings that I have to paste in .vimrc to make this work, but I can't find any explanation for those cryptic map, imap settings. What is the underlying issue here, and how can I fix it? Thanks!

  Read the article

• How to configure Bullet for LookAt?

  - by AllCoder

  I'm having problems positioning Bullet objects. I am doing: ToolVec3 origin = ToolVec3( obj_posx, obj_posy, obj_posz ); ToolVec3 vmod = ToolVec3( object_sizex / 2.0f, object_sizey / 2.0f, object_sizez / 2.0f ); btTransform shapeTransform = btTransform::getIdentity(); shapeTransform.setOrigin( btVector3(origin.x+vmod.x, origin.y+vmod.y, origin.z+vmod.z) ); btDefaultMotionState* myMotionState = new btDefaultMotionState(shapeTransform); btRigidBody::btRigidBodyConstructionInfo rbInfo(mass,myMotionState,m_collisionShapes[2],localInertia); btRigidBody* body = new btRigidBody(rbInfo); I then do: btCollisionObject* colObj = m_dynamicsWorld->getCollisionObjectArray()[i]; btRigidBody* body = btRigidBody::upcast(colObj); if(body && body->getMotionState()) { btDefaultMotionState* myMotionState = (btDefaultMotionState*)body->getMotionState(); myMotionState->m_graphicsWorldTrans.getOpenGLMatrix(m); } else { colObj->getWorldTransform().getOpenGLMatrix(m); } And after obtaining the matrix m, I paste it as model matrix. I am observing few things: I must add some weird "size / 2" to object's position, to have it drawed normally, I have following "up" look at vector defined: "0.0f, -1.0f, 0.0f" – basically, Y grows up, Z grows forward (to monitor), BUT – x grows LEFT, I think there is some conflict with the X direction.. I cannot obtain consistent positioning having world setup like this How to configure this in Bullet? Why the weird + size/2 requirement?

  Read the article

• Does performing a System Refresh keep these folders?

  - by crayzeedude

  Alright, let's make this simple. I'm really contemplating performing a system refresh. What I've been looking for all over is if the process keeps some certain folders. Namely my Documents, Pictures, Videos, Downloads, and Desktop folders. There's some real valuable stuff in there, and I really want to know if refreshing my PC will keep these intact. Also, there is an application located at C:\Pesterchum that I would like to keep intact. Should I back it up, then copy it back into its original location after the refresh? Or will it be left untouched?

  Read the article

< Previous Page | 290 291 292 293 294 295 296 297 298 299 300 301  | Next Page >