Search Results

Search found 18151 results on 727 pages for 'upside down'.

Page 294/727 | < Previous Page | 290 291 292 293 294 295 296 297 298 299 300 301  | Next Page >

• Dual monitors though 1 HDMI port

  - by Carlos

  I currently have a Dell Studio XPS 13 laptop connected to a 24" HP monitor (w2448hc). Im thinking on getting a second one, however am wondering what i need for the setup (hardware wise). Also I was wondering it there is any down side to it, or something i should be aware of. For example, image quality loss, GPU overloading, or anything important I should know. More than anything Im interested in your advice. Also the monitors do have built in speakers (HDMI sound output), is the sound going to be reproduced by only one monitor or both? Specs Model: Dell Studio XPS 13 OS: Genuine Windows® 7 Home Premium 64-Bit CPU: Intel® CoreTM 2 Duo P8600 (2.4GHz, 3MB L2 Cache, 1067MHz FSB) Chipset: NVIDIA® GeForce® MCP79MX RAM: 4GB 1067MHz DDR3 SDRAM Graphics: SLi NVIDIA® GeForce® 9500M - 256MB Thanks for your advice, if there is anything additional i need to buy an you have a personal preference pass the brand name so i can check it out. Thanks!

  Read the article

• OpenVPN on ec2 bridged mode connects but no Ping, DNS or forwarding

  - by michael

  I am trying to use OpenVPN to access the internet over a secure connection. I have openVPN configured and running on Amazon EC2 in bridge mode with client certs. I can successfully connect from the client, but I cannot get access to the internet or ping anything from the client I checked the following and everything seems to shows a successful connection between the vpn client/server and UDP traffic on 1194 [server] sudo tcpdump -i eth0 udp port 1194 (shows UDP traffic after establishing connection) [server] sudo iptables -L Chain INPUT (policy ACCEPT) target prot opt source destination ACCEPT all -- anywhere anywhere ACCEPT all -- anywhere anywhere Chain FORWARD (policy ACCEPT) target prot opt source destination ACCEPT all -- anywhere anywhere Chain OUTPUT (policy ACCEPT) target prot opt source destination [server] sudo iptables -L -t nat Chain PREROUTING (policy ACCEPT) target prot opt source destination Chain POSTROUTING (policy ACCEPT) target prot opt source destination MASQUERADE all -- ip-W-X-Y-0.us-west-1.compute.internal/24 anywhere Chain OUTPUT (policy ACCEPT) target prot opt source destination [server] openvpn.log Wed Oct 19 03:11:26 2011 localhost/a.b.c.d:61905 [localhost] Inactivity timeout (--ping-restart), restarting Wed Oct 19 03:11:26 2011 localhost/a.b.c.d:61905 SIGUSR1[soft,ping-restart] received, client-instance restarting Wed Oct 19 03:41:31 2011 MULTI: multi_create_instance called Wed Oct 19 03:41:31 2011 a.b.c.d:57889 Re-using SSL/TLS context Wed Oct 19 03:41:31 2011 a.b.c.d:57889 LZO compression initialized Wed Oct 19 03:41:31 2011 a.b.c.d:57889 Control Channel MTU parms [ L:1574 D:166 EF:66 EB:0 ET:0 EL:0 ] Wed Oct 19 03:41:31 2011 a.b.c.d:57889 Data Channel MTU parms [ L:1574 D:1450 EF:42 EB:135 ET:32 EL:0 AF:3/1 ] Wed Oct 19 03:41:31 2011 a.b.c.d:57889 Local Options hash (VER=V4): '360696c5' Wed Oct 19 03:41:31 2011 a.b.c.d:57889 Expected Remote Options hash (VER=V4): '13a273ba' Wed Oct 19 03:41:31 2011 a.b.c.d:57889 TLS: Initial packet from [AF_INET]a.b.c.d:57889, sid=dd886604 ab6ebb38 Wed Oct 19 03:41:35 2011 a.b.c.d:57889 VERIFY OK: depth=1, /C=US/ST=CA/L=SanFrancisco/O=EXAMPLE/CN=EXAMPLE_CA/[email protected] Wed Oct 19 03:41:35 2011 a.b.c.d:57889 VERIFY OK: depth=0, /C=US/ST=CA/L=SanFrancisco/O=EXAMPLE/CN=localhost/[email protected] Wed Oct 19 03:41:37 2011 a.b.c.d:57889 Data Channel Encrypt: Cipher 'BF-CBC' initialized with 128 bit key Wed Oct 19 03:41:37 2011 a.b.c.d:57889 Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Wed Oct 19 03:41:37 2011 a.b.c.d:57889 Data Channel Decrypt: Cipher 'BF-CBC' initialized with 128 bit key Wed Oct 19 03:41:37 2011 a.b.c.d:57889 Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Wed Oct 19 03:41:37 2011 a.b.c.d:57889 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 1024 bit RSA Wed Oct 19 03:41:37 2011 a.b.c.d:57889 [localhost] Peer Connection Initiated with [AF_INET]a.b.c.d:57889 Wed Oct 19 03:41:39 2011 localhost/a.b.c.d:57889 PUSH: Received control message: 'PUSH_REQUEST' Wed Oct 19 03:41:39 2011 localhost/a.b.c.d:57889 SENT CONTROL [localhost]: 'PUSH_REPLY,redirect-gateway def1 bypass-dhcp,route-gateway W.X.Y.Z,ping 10,ping-restart 120,ifconfig W.X.Y.Z 255.255.255.0' (status=1) Wed Oct 19 03:41:40 2011 localhost/a.b.c.d:57889 MULTI: Learn: (IPV6) -> localhost/a.b.c.d:57889 [client] tracert google.com Tracing route to google.com [74.125.71.104] over a maximum of 30 hops: 1 347 ms 349 ms 348 ms PC [w.X.Y.Z] 2 * * * Request timed out. I can also successfully ping the server IP address from the client, and ping google.com from an SSH shell on the server. What am I doing wrong? Here is my config (Note: W.X.Y.Z == amazon EC2 private ipaddress) bridge config on br0 ifconfig eth0 0.0.0.0 promisc up brctl addbr br0 brctl addif br0 eth0 ifconfig br0 W.X.Y.X netmask 255.255.255.0 broadcast W.X.Y.255 up route add default gw W.X.Y.1 br0 /etc/openvpn/server.conf (from https://help.ubuntu.com/10.04/serverguide/C/openvpn.html) local W.X.Y.Z dev tap0 up "/etc/openvpn/up.sh br0" down "/etc/openvpn/down.sh br0" ;server W.X.Y.0 255.255.255.0 server-bridge W.X.Y.Z 255.255.255.0 W.X.Y.105 W.X.Y.200 ;push "route W.X.Y.0 255.255.255.0" push "redirect-gateway def1 bypass-dhcp" push "dhcp-option DNS 208.67.222.222" push "dhcp-option DNS 208.67.220.220" tls-auth ta.key 0 # This file is secret user nobody group nogroup log-append openvpn.log iptables config sudo iptables -A INPUT -i tap0 -j ACCEPT sudo iptables -A INPUT -i br0 -j ACCEPT sudo iptables -A FORWARD -i br0 -j ACCEPT sudo iptables -t nat -A POSTROUTING -s W.X.Y.0/24 -o eth0 -j MASQUERADE echo 1 > /proc/sys/net/ipv4/ip_forward Routing Tables added route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface W.X.Y.0 0.0.0.0 255.255.255.0 U 0 0 0 br0 0.0.0.0 W.X.Y.1 0.0.0.0 UG 0 0 0 br0 C:>route print =========================================================================== Interface List 32...00 ff ac d6 f7 04 ......TAP-Win32 Adapter V9 15...00 14 d1 e9 57 49 ......Microsoft Virtual WiFi Miniport Adapter #2 14...00 14 d1 e9 57 49 ......Realtek RTL8191SU Wireless LAN 802.11n USB 2.0 Net work Adapter 10...00 1f d0 50 1b ca ......Realtek PCIe GBE Family Controller 1...........................Software Loopback Interface 1 11...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface 16...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter 17...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2 18...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #3 36...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #5 =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 10.1.2.1 10.1.2.201 25 10.1.2.0 255.255.255.0 On-link 10.1.2.201 281 10.1.2.201 255.255.255.255 On-link 10.1.2.201 281 10.1.2.255 255.255.255.255 On-link 10.1.2.201 281 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 10.1.2.201 281 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 10.1.2.201 281 =========================================================================== Persistent Routes: Network Address Netmask Gateway Address Metric 0.0.0.0 0.0.0.0 10.1.2.1 Default =========================================================================== C:>tracert google.com Tracing route to google.com [74.125.71.147] over a maximum of 30 hops: 1 344 ms 345 ms 343 ms PC [W.X.Y.221] 2 * * * Request timed out.

  Read the article

• SQL SERVER – Take the Quiz for a chance to win a Quadcopter Drone – Brain Teasers

  - by Pinal Dave

  It has been a long time since we ran quiz. So let us get ready for a quiz. The quiz has two parts. You have to get both the parts correct to win Quadcopter with Camera (we will call it drone). We will be giving away a total of 2 Quadcopters. The quiz is extremely easy and I will ship the Drone anywhere in the world where Amazon will ship it. Let us jump directly to the quiz. Please complete all the three questions of the contest.  Contest Part 1: Brain Teasers There are two questions for you in this part of the contest. Question: There are two 7s. How will you write select statement with a single operator that returns single 7? Hint: SELECT 7(Answer)7 Question: Write down the shortest code that produces 1 without using any numbers in the select statement? Hint: SELECT (Answer) Contest Part 2: Download and Activate Rapid SQL Question: Download and Activate Rapid SQL. Hint: You have to download and activate Rapid SQL. If you do not activate Rapid SQL, you will be disqualified for the contest. Why take risk, let us start! That’s it! Just answer above questions in the following comments area, in following format. Remember: Use comments area right below the blog to take participation in the contest Answer before June 5, 2014 midnight GMT. The winner will be announced on June 8. The winner will be selected randomly from all the valid answers. All the valid answers will be kept hidden till June 5, 2014. There will be a total of two winners. The contest is open for any country of the world where Amazon ships products. Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: PostADay, SQL, SQL Authority, SQL Puzzle, SQL Query, SQL Server, SQL Tips and Tricks, T SQL

  Read the article

• Component Development within SOA

  How do the concepts of component development work within SOA? Let’s first break this question down by defining what component development is. Component development is the process of implementing specific functionality in the form of small units of complied code that can be reused across multiple applications or product families. Typically, components are integrated with other components forming composite components. In general, most interaction between components is done through interfaces to promote loose coupling. The concept of loose coupling refers to the interconnections of components in a system so that their component dependences based on contracts defined by interfaces. A real life example of this can be experienced while using Legos to build a structure. If we consider each Lego block as a component, then when two more Legos are connected they form a composite component due to the fact that the structure is made up of multiple components.   It is important to note that composite components can be made from standard components and other composite components. Eventually as various components and composite components become interconnected a structure begins to form in the shape of an application or in the case of Legos in the form of Lego structure. Software components can loosely be defined as small units of related implemented functionality that can communicate with other components or may have dependencies on other components. Based on the definitions provide above, it is my personal opinion that SOA works well with the concepts of component development. The SOA architectural style focuses on creating loosely coupled services. Each service much like a component offers related functionality that can be accessed by various requesting clients.  In addition services can be derived just like components in that services can be built on other services to form composite services. In summary, the concepts of component development can work within SOA based on the example above.

  Read the article

• single point of failure in IIS Web Farm Framework setting?

  - by aamir sajjad

  ASP.NET WEB API Windows Server 2008 R2/IIS 7.5/Web Farm Framework 2.5 I am planning to deploy application across 4 web servers. Should i use shared content/configuration using DFS among web servers for web farm scenario? Second option is to use Web Farm Framework for deployment. Furthermore, is there chance of single point of failure in WFF? for example what if primary server goes down. which option would be better? pros and cons of each of the above. I appreciate your response.

  Read the article

• What are the best practices for service accounts?

  - by LockeCJ

  We're running several services in our company using a shared domain account. Unfortunately, the credentials for this account are widely distributed and being used frequently for both service and non-service purposes. This has led to a situation where it is possible that the services will be temporarily down due to this shared account being locked. Obviously, this situation needs to change. The plan is to change the services to run under a new account, but I don't think this goes far enough, as that account is subject to the same locking policy. My questions is this: Should we be setting up the service accounts differently than other domain accounts, and if we do, how do we manage those accounts. Please keep in mind that we are running a 2003 domain, and upgrading the domain controller is not a viable solution in the near term.

  Read the article

• lsass.exe memory leak on windows 2003 server

  - by thelsdj

  In the past month or so I noticed that lsass.exe has started to leak memory, getting to 500MB+ of ram in under a week after reboot. Before this I had never noticed it using any significant amount of memory compared to other processes on the system. This is happening on 2 identical servers, neither of which has anything to do with Active Directory. Maybe a recent Windows Update has caused this? Any thoughts on things to check? As a side question is there some way to recycle the memory usage of lsass.exe without rebooting? Edit: Here is what I'm seeing in Process Monitor, there are thousands of registry open/query/close a minute from lsass.exe. How can I track down what is triggering these?

  Read the article

• What is recommended minimum object size for gzip performance benefits?

  - by utt73

  I'm working on improving page speed display times, and one of the methods is to gzip content from the webserver. Google recommends: Note that gzipping is only beneficial for larger resources. Due to the overhead and latency of compression and decompression, you should only gzip files above a certain size threshold; we recommend a minimum range between 150 and 1000 bytes. Gzipping files below 150 bytes can actually make them larger. We serve our content through Akamai, using their network for a proxy and CDN. What they've told me: Following up on your question regarding what is the minimum size Akamai will compress the requested object when sending it to the end user: The minimum size is 860 bytes. My reply: What is the reason(s) for why Akamai's minimum size is 860 bytes? And why, for example, is this not the case for files Akamai serves for facebook? (see below) Google recommends to gzip more agressively. And that seems appropriate on our site where the most frequent hits, by far, are AJAX calls that are <860 bytes. Akamai's response: The reasons 860 bytes is the minimum size for compression is twofold: (1) The overhead of compressing an object under 860 bytes outweighs performance gain. (2) Objects under 860 bytes can be transmitted via a single packet anyway, so there isn't a compelling reason to compress them. So I'm here for some fact checking. Is the 860 byte limit due to packet size the end of this reasoning? Why would high traffic sites push this down to the 150 byte limit... just to save on bandwidth costs (since CDNs base their charges on bandwith offloaded from origin), or is there a performance gain in doing so?

  Read the article

• How to cluster two IIS servers for failover?

  - by Ram Gopal

  We have IIS servers running in 2 machines hosting few webservices which provided some integration services to an old document Mgmt system, word/excel related service, etc.... We need to cluster/load balance these 2 IIS in order to achieve a fail-over. i.e If one of the IIS server is down, the other on should be able to handle the request. The reverse proxy used in the DMZ is also IIS 7.5 Our overall business application is in fact a J2EE one and we have successfully deployed on a weblogic cluster installed on the same two machines and load balance from the same above mentioned IIS reverse proxy at DMZ. But we do not know how to achieve this in case of IIS.

  Read the article

• Windows Azure Evolution &ndash; Preview Developer Portal

  - by Shaun

  With the MEET Windows Azure event on 7th June, there are many new features and updates in windows azure platform. In the coming several posts I will try to cover some of them. And in the first post here I would like to just have a quick walkthrough of the new preview developer portal.   History of the Developer Portal If you have been working with windows azure since 2009 or 2010, you should remember the first version of the developer portal. It was built in HTML with very limited features. I have the impression when I was using is old one. The layout is not that attractive and you have very limited features. On November, 2010 alone with the SDK 1.3 release, the developer portal was getting a big jump. In order to give more usability and features this it turned to be built on Silverlight. Hence it runs like a desktop application with many windows, lists, commands and context menus. From 2010 till now many features were involved into this portal, such as the remote desktop, co-admin, virtual connect, VM role, etc.. And the portal itself became more and more complicated. But it brought some problems by using the Silverlight. The first one is the browser capability. As you know in most mobile and tablet device the browser doesn’t allow the rich content plugin, such as Flash and Silverlight. This means people cannot open and configure their azure services from their iPad, iPhone and Windows Phone, etc., even though what they need may just be restart a hosted service, or view the status of their databases. Another problem is the performance. Silverlight provides rich experience to the users, but also needs more bandwidth. So in this upgrade the preview developer portal will be back to use HTML, with JavaScript, as a mobile friendly, cross browser, interactively web site.   Preview Portal vs. Silverlight Portal Before I started to talk about the new preview portal I’d better highlight that, this preview portal is a PREVIEW version, which means even though you can do almost all features that already in the old one, as long as some cool new features I will mention in the coming several posts, there are something still under developed and migrated. So sometimes you need to switch back to the old one. For example, in preview portal there is no co-admin manage function, no remote desktop function and the SQL database manage function will take you back to the old SQL Azure Manage Portal. But as Microsoft said these missing features will be moved in the preview portal in the couple of next few months. Since the public URL of the developer portal, https://windows.azure.com/, had been changed to point to this preview one, you need to click to preview button on top of the page and click the “Take me to the previous portal” link.   Overview There are four parts in the preview portal. On the top is the header which shows the account you are currently logging in. If you click on the header it will show the top menu of windows azure, where you can navigate to the windows azure home page, the price information page, community and account, etc.. The navigation bar is on the left hand side, with the categories listed below. ALL ITEMS All items in your windows azure account, includes the web sites, services, databases, etc.. WEB SITES The web sites in your windows azure account. It will only show the web sites you have. The linked resources will be shown if you drill down into a web site. VIRTUAL MACHINES The virtual machines that you had been deployed to azure. CLOUD SERVICES All windows azure hosted services in your account. SQL DATABASES All SQL databases (SQL Azure) in your account. STORAGE All windows azure storage services in your account. NETWORKS The virtual network (Windows Azure Connect) you had been created. The available items will be listed in the main part of the page based on which category your currently selected. If there’s no item it will show the link to you to quick create. At the bottom of the page there will be the command and information bar. Based on what is selected and what is performed by the user, it will show the related information and commands. For example, in the image below when I was creating a new web site, the information bar told me that my web site is being provisioned; and there are two commands in the command bar. And once it ready the command bar will show some commands that I can do to my new web site. The “Web Sites” is a new feature introduced alone with this upgrade. It gives us an easier and quicker way to establish a website from the scratch or from some existing library. I will introduce it more details in the coming next post. Also in the command bar you can create a service by clicking the NEW button. It will slide the creation panel up to you.   Where’s My Hosted Services The Windows Azure Hosted Services had been renamed to the Cloud Services. Create a new service would be very easy. Just click the NEW button at the bottom of the page, and select the CLOUD SERVICE and QIUICK CREATE. This will create a blank hosted service without deployment and certificate. It just needs you to specify the service URL and the affinity/region. Then the service will be shown in the list. If you clicked the item all information will be shown in the main part. Since there’s no package deployed to this service so currently we cannot see any information about it. But we can upload the package by using the command at the bottom. And as you can see, we could manage the configuration, instances, certificates and we can scale up and down (change the VM size), in and out (increase and decrease the instance count) to our service. Assuming I had created an ASP.NET MVC 3 web role project in Visual Studio and completed the package. Then I can click the UPLOAD button in this page to deploy my package. In the popping up window I just specify my deployment name, package file and configure file. Also I can check the box below so that it will NOT warn me if only one instance of this deployment. Once we clicked the OK button our package will be uploaded and provisioned by the platform. After a while we can see the service was ready from the information bar. We can have the basic information about this service and deployment if we to the dashboard page. For example the usage overview diagram, status, URL, public IP address, etc.. In the configure page we can view and change the CSCFG content such as the monitor setting, connection strings, OS family. In scale page we can increase and decrease the count of the instances. And in the instances page we can view all instances status. And, if your services is using some SQL databases and storages they will be shown as the linked resources under the linked resources page. And you can manage the certificates of this service as well under the certificates page.   How About My Storage Services The storage service can be managed by clicking into the STORAGES link in the navigation bar. And we can create a new storage service from the NEW button. After specify the storage name and region it will be previsioned by the platform. If you want to copy or manage the storage key you can just click the Manage Keys button at the bottom, which is very easy. What I want to highlight here is that, you can monitor your storage service by enabling the monitor configuration. Click the storage item in the list and navigate to the configure page. As you can see in the page you can enable the monitoring for blob, table and queue. And you can also enable the logging when any requests come to the storage. But as the tooltip shown in the page, enabling the monitoring and logging will increase the usage of the storage, which means increase the bill of them. So make sure you enable them properly.   And My SQL Databases (SQL Azure) The last thing I want to quick introduce is the SQL databases, which was formally named SQL Azure. You can create a new SQL Database Server and a new database by clicking the ADD button under the SQL Database navigation item. In the popping up windows just specify the database name, the edition, size, collation and the server. You can select an existing SQL Database Server if you have, or cerate a new one. If you selected to create a new server, there will be another step you need to do, which is specify the server login, password and the region. Once it ready you can mange your databases as well as the servers in the portal. In a particular server you can update the firewall settings in its Configure page. So, What Else There are some other area on the preview portal I didn’t cover, such as the virtual machines, virtual network and web sites. Regarding the virtual machines and web sites I will talk about them in the future separated post. Regarding the virtual network, it the Windows Azure Connect we are familiar with. But as I mention in the beginning of this post, the preview portal is still under developed. Some features are not available here. For example, you cannot manage the co-admin of your subscriptions, you cannot open the remote desktop on your hosted services, and you cannot navigate to the Windows Azure Service Bus, Access Control and Caching, which formally named Windows Azure AppFabric directly. In these cases you need to navigate back to the old portal. So in the coming several months we might need to use both these two sites.   Summary In this post I quick introduced the new windows azure developer portal. Since it had been rearranged and renamed I demonstrated some features that existing in the old portal, such as how to create and deploy a hosted service, how to provision a storage service and SQL database. All features in the old portal had been, is being and will be migrated into this new portal, but some of them were in a different category and page we need to figure out.   Hope this helps, Shaun All documents and related graphics, codes are provided "AS IS" without warranty of any kind. Copyright © Shaun Ziyan Xu. This work is licensed under the Creative Commons License.

  Read the article

• DEEP DIVE MVVM at #MIX11

  - by Laurent Bugnion

  The public (you!) has spoken, and “Deep Dive MVVM” was selected (along with 11 other open call talks) out of 217 proposals. There were 17’000 votes! These are pretty amazing numbers, and believe me when I tell you that I still didn’t completely realize what just happened! I want to really underline the outstanding quality of many of the talks that were proposed. I decided not to reveal my votes, because I just know too many of the candidates and I had only 10 votes but let’s just say that some of my favorites were picked, and some were not, and I really wish that I can see them all either at MIX or in another conference. I already started putting down ideas for the talk (not too many, because I didn’t want to jinx it) and it should be a really great session. We will, as the title shows, dive deep into the subtleties of MVVM, and explore some techniques that allow to overcome some of the hurdles presented by this pattern. This session will be shaped by many emails that I received over the past year, since “Understanding the MVVM pattern” was presented, and offered, for many, a first look into Model-View-ViewModel. So now’s the chance, comment and let me know what topics you would like to discuss. If you had not done so before, go ahead and watch last year’s session, it will be a great preparation. Let’s talk real life development, let’s explore the problems and find solutions. I already have a nice collection of emails asking questions around MVVM and my goal is to answer as many as I can. Leave a comment and I will do my best to answer these as well. The date/time was not announced yet, so watch this space for details. I am really looking forward to seeing many of you in Las Vegas, and for those who cannot make it, don’t worry, all the sessions will be published in video by the amazing MIX team a few hours after the session actually takes place. Thanks for your confidence and in the meantime, Happy Coding! Laurent Laurent Bugnion (GalaSoft) Subscribe | Twitter | Facebook | Flickr | LinkedIn

  Read the article

• How to setup VIM for php development?

  - by Ashwin kumar

  I have been trying a lot (but not smartly) to figure out setting up VIM, ctags, omnicomple for PHP development. On Googling I found this file. But have no clue how to use it. What have I done until now? Here it is: I am on Fedora 17 64-bit OS Logged in as root Found my VIM version to be VIM - Vi IMproved 7.3 (2010 Aug 15, compiled May 8 2012 15:05:51) Followed the install details as here http://www.vim.org/scripts/script.php?script_id=3171 install details Place in $HOME/.vim/autoload/phpcomplete.vim and enable the php ftplugin What else I am missing? How do I start using omnicomplete. (this is the first time I am using omnicomplete) Why didn't I try IDE's? I have a single core machine running LAMP stack. Didn't wanted to slow down everything and hence sticking to command line environment.

  Read the article

• Move Firefox’s Tab Bar to the Top

  - by Asian Angel

  Would you prefer to have Firefox’s Tab Bar located at the top of the browser instead of its’ default location? See how easy it is to move the Tab Bar back and forth between the top and current positions “flip switch style” with the Tabs On Top extension. Note: Tabs On Top extension supports multi-row feature in TabMixPlus. Before You can see the “Tab Bar” in its’ default location here in our test browser…not bad but what if you prefer having it located at the top of the browser? After As soon as you have installed the extension and restarted Firefox the “Tab Bar” will have automatically moved to the top of the browser. You will most likely notice a slight decrease in tab height as well (which occurred during our tests). To move the “Tab Bar” back and forth between the top and default locations just select/deselect “Tab Bar on top” in the “Toolbars Context Menu”. You can quickly reduce the size of the upper UI after hiding some of the other toolbars and go even further if you like using extensions that will hide the “Title Bar”. This is definitely a good UI matching extension for anyone using a Chrome based theme in Firefox. Conclusion If you are unhappy with default location for Firefox’s “Tab Bar” then this extension will certainly provide an alternative option for you. Links Download the Tabs On Top extension (Mozilla Add-ons) Similar Articles Productive Geek Tips Use the Keyboard to Move Items Up or Down in Microsoft WordAdd Copy To / Move To on Windows 7 or Vista Right-Click MenuBring Misplaced Off-Screen Windows Back to Your Desktop (Keyboard Trick)Moving Your Personal Data Folders in Windows Vista the Easy WayAdd Copy To / Move To to the Windows Explorer Right Click Menu TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Live PDF Searches PDF Files and Ebooks Converting Mp4 to Mp3 Easily Use Quick Translator to Translate Text in 50 Languages (Firefox) Get Better Windows Search With UltraSearch Scan News With NY Times Article Skimmer SpeedyFox Claims to Speed up your Firefox

  Read the article

• 2D character controller in unity (trying to get old-school platformers back)

  - by Notbad

  This days I'm trying to create a 2D character controller with unity (using phisics). I'm fairly new to physic engines and it is really hard to get the control feel I'm looking for. I would be really happy if anyone could suggest solution for a problem I'm finding: This is my FixedUpdate right now: public void FixedUpdate() { Vector3 v=new Vector3(0,-10000*Time.fixedDeltaTime,0); _body.AddForce(v); v.y=0; if(state(MovementState.Left)) { v.x=-_walkSpeed*Time.fixedDeltaTime+v.x; if(Mathf.Abs(v.x)>_maxWalkSpeed) v.x=-_maxWalkSpeed; } else if(state(MovementState.Right)) { v.x= _walkSpeed*Time.fixedDeltaTime+v.x; if(Mathf.Abs(v.x)>_maxWalkSpeed) v.x=_maxWalkSpeed; } _body.velocity=v; Debug.Log("Velocity: "+_body.velocity); } I'm trying here to just move the rigid body applying a gravity and a linear force for left and right. I have setup a physic material that makes no bouncing and 0 friction when moving and 1 friction with stand still. The main problem is that I have colliders with slopes and the velocity changes from going up (slower) , going down the slope (faster) and walk on a straight collider (normal). How could this be fixed? As you see I'm applying allways same velocity for x axis. For the player I have it setup with a sphere at feet position that is the rigidbody I'm applying forces to. Any other tip that could make my life easier with this are welcomed :). P.D. While coming home I have noticed I could solve this applying a constant force parallel to the surface the player is walking, but don't know if it is best method.

  Read the article

• Miami 311: Built on Windows Azure

  - by Josh Holmes

  This is a cool use of Azure. The city of Miami tool their “311” data around potholes, trash pickup issues, recycling issues, broken sidewalks and the like and put that data in Azure. The next step is that they leveraged Bing Maps and Silverlight to visualize those issues spread on a map of the city. The solution takes advantage of virtually unlimited storage and processing power, provides the ability to quickly address service requests and implement updates even during peak times such as hurricane season. If things change, the City can bring the solution on site or move to a physical facility, all based on  need and cost-effectiveness. As a result, residents logging on to Miami 311 can see on average 4,500 issues in progress - not represented as a ‘list', but located on a map in relation to other projects in their neighborhood .  A simple click on the map allows them to easily drill down to more and more specific details if they want. In short, they have turned what used to be represented by a meaningless list of data into useful information, and created  actionable and consumable knowledge that is relevant to the citizens of Miami. For Miami, their ‘service call to the city' becomes an interactive process they can follow - and the City has a new tool to manage and deliver outcomes. … When the city made the move to the web, they chose tools they knew and software they trust. The Microsoft Windows Azure cloud platform made it easy to do, and they used both Bing mapping and Silverlight to build a user friendly front end. According to Port25 (Miami 311: Built on Windows Azure - Port 25: The Open Source Community at Microsoft), it took two people 8 days to implement the whole system and they are going to open source their solution so that other cities can leverage it. I haven’t seen yet where and how they are going to release it but I’ll keep you posted if I find out.

  Read the article

• automator scripts - resources

  - by sagar

  In Leopard, on Finder - desktop, right click pop up menu has an option for automator scripts. In Snow Leopard - they have removed this option. More over, I would like to learn some automator scripts. What are the great resources for learning about automator & it's script ? Suppose, I want to create an automator for creating a tar.gz for selected files & folders. What should I do ? Thanks in advance for sharing your knowledge. Please add comment before down vote or close vote. Sagar.

  Read the article

• MSCC: Purpose and benefits of Version Control Systems (VCS)

  Unfortunately, there was no monthly meetup during May. Which means that it was even more important and interesting to go forward with a great topic for this month. Earlier this year I already spoke to Nayar Joolfoo about doing a presentation on version control systems (VCS), and he gladly agreed since then. It was just about finding the right date for the action. Furthermore, it was also a great coincidence that Avinash Meetoo announced on social media networks that Knowledge 7 is about to have a new training on "Effective git" - which correlates to a book title Avinash is currently working on - all the best with your approach on this and reach out to our MSCC craftsmen for recessions. Once again a big Thank you to Orange Ebene Accelerator on providing the venue for us, and the MSCC members involved on securing the time slot for our event. Unfortunately, it's kind of tough to get an early confirmation for our meetups these days. I'll keep you posted on that one as there are some interesting and exciting options coming up soon. Okay, let's talk about the meeting and version control systems again. As usual, I'm going to put my first impression of the meetup: "Absolutely great topic, questions and discussions on version control systems, like git or VSO. I was also highly pleased by the number of first timers and female IT geeks. Hopefully, we will be able to keep this trend for future get-togethers." And I really have to emphasise the amount of fresh blood coming to our gathering. Also, during the initial phase it was surprising to see that exactly those first-timers, most of them students at various campuses here on the island, had absolutely no idea about version control systems. More about further down... Reactions of other attendees If I counted correctly, we had a total of 17 attendees this month, and I'd like to give you feedback from some of them: "Inspiring. Helped me understand more about GIT." -- Sean on event comments "Joined the meetup today with literally no idea what is a version control system. I have several reasons why I should be starting to use VCS as from NOW in my projects. Thanks Nayar, Jochen and other participants :)" -- Yudish on event comments "Was present today and I'm very satisfied.I was not aware if there was a such tool like git available. Thanks to those who contributed for this meetup.It was great. Learned a lot from this meetup!!" -- Leonardo on event comments "Seriously, I can see how it’s going to ease my task and help me save time. Gone are the issues with files backups.  And since I’ll be doing my dissertation this year, using Git would help me a lot for my backups and I’m grateful to Nayar for the great explanation." -- Swan-Iyah on MSCC meetup : Version Controls Hopefully, I'll be able to get some other sources - personal blogs preferred - on our meeting. Geeks, thank you so much for those encouraging comments. It's really great to experience that we, all members of the MSCC, are doing the right thing to get more IT information out, and to help each other to improve and evolve in our professional careers. Our agenda of the day Honestly, we had a bumpy start... First, I was battling a little bit with the movable room divider in order to maximize the space. I mean, we had 24 RSVPs and usually there might additional people coming along. Then, for what ever reason, we were facing power outages - actually twice in short periods. Not too good for the projector after all, but hey it went smooth for the rest of the time being. And last but not least... our first speaker Nayar got stuck somewhere on the road. ;-) Anyway, not a real show-stopper and we used the time until Nayar's arrival to introduce ourselves a little bit. It is always important for me to get to know the "newbies" a little bit, and as a result we had lots of students of university - first year, second year and recent graduates - among them. Surprisingly, none of them was ever in contact with version control systems at all. I mean, this is a shocking discovery! Similar to the ability of touch-typing I'd say that being able to use (and master) any kind of version control system is compulsory in any job in the IT industry. Seriously, I'm wondering what is being taught during the classes on the campus. All of them have to work on semester assessments or final projects, even in small teams of 2-4 people. That's the perfect occasion to get started with VCS. Already in this phase, we had great input from more experienced VCS users, like Sean, Avinash and myself. git - a modern approach to VCS - Nayar What a tour! Nayar gave us the full round of git from start to finish, even touching some more advanced techniques. First, he started to explain about the importance of version control systems as an essential tool for software developers, even working alone on a project, and the ability to have a kind of "time machine" that allows you to inspect and revert to a previous version of source code at any time. Then he showed how easy it is to install git on an Ubuntu based system but also mentioned that git is literally available for any operating system, like Windows, Mac OS X and of course other Linux distributions. Next, he showed us how to set the initial configuration values of user name and email address which simplifies the daily usage of the git client while working with your repositories. Then he initialised and added a new repository for some local development of a blogging software. All commands were done using the command line interface (CLI) so that they can be repeated on any system as reference. The syntax and the procedure is always the same, and Nayar clearly mentioned this to the attendees. Now, having a git repository in place it was about time to work on some "important" changes on the blogging software - just for the sake of demonstrating the ease of use and power of git. One interesting question came very early: "How many commands do we have to learn? It looks quite difficult at the moment" - Well, rest assured that during daily development circles you will need less than 10 git commands on a regular base: git add, commit, push, pull, checkout, and merge And Nayar demo'd all of them. Much to the delight of everyone he also showed gitk which is the git repository browser. It's an UI tool to display changes in a repository or a selected set of commits. This includes visualizing the commit graph, showing information related to each commit, and the files in the trees of each revision. Using gitk to display and browse information of a local git repository And last but not least, we took advantage of the internet connectivity and reached out to various online portals offering git hosting for free. Nayar showed us how to push the local repository into a remote system on github. Showing the web-based git browser and history handling, and then also explained and demo'd on how to connect to existing online repositories in order to get access to either your own source code or other people's open source projects. Next to github, we also spoke about bitbucket and gitlab as potential online platforms for your projects. Have a look at the conditions and details about their free service packages and what you can get additionally as a paying customer. Usually, you already get a lot of services for up to five users for free but there might be other important aspects that might have an impact on your decision. Anyways, moving git-based repositories between systems is a piece of cake, and changing online platforms is possible at any stage of your development. Visual Studio Online (VSO) - Jochen Well, Nayar literally covered all elements of working with git during his session, including the use of external online platforms. So, what would be the advantage of talking about Visual Studio Online (VSO)? First of all, VSO is "just another" online platform for hosting and managing git repositories on remote systems, equivalent to github, bitbucket, or any other web site. At the moment (of writing), Microsoft also provides a free package of up to five users / developers on a git repository but there is more in that package. Of course, it is related to software development on the Windows systems and the bonds are tightened towards the use of Visual Studio but out of experience you are absolutely not restricted to that. Connecting a Linux or Mac OS X machine with a git client or an integrated development environment (IDE) like Eclipse or Xcode works as smooth as expected. So, why should one opt in for VSO? Well, one of the main aspects that I would like to mention here is that VSO integrates the Application Life Cycle Methodology (ALM) of Microsoft in their platform. Meaning that you get agile project management with Backlogs, Sprints, Burn-down charts as well as the ability to track tasks, bug reports and work items next to collaborative team chats. It's the whole package of agile development you'll get. And, something I mentioned briefly during the begin of our meeting, VSO gives you the possibility of an automated continuous integrated (CI) process which builds and can run tests of your source code after each commit of changes. Having a proper CI strategy is also part of the Clean Code Developer practices - on Level Green actually -, and not only simplifies your life as a software developer but also reduces the sources of potential errors. Seamless integration and automated deployment between Microsoft Azure Web Sites and git repository But my favourite feature is the seamless continuous deployment to Microsoft Azure. Especially, while working on web projects it's absolutely astounishing that as soon as you commit your chances it just takes a couple of seconds until your modifications are deployed and available on your Azure-hosted web sites. Upcoming Events and networking Due to the adjusted times, everybody was kind of hungry and we didn't follow up on networking or upcoming events - very unfortunate to my opinion and this will have an impact on future planning of our meetups. Because I rather would like to see more conversations during and at the end of our meetings than everyone just packing their laptops, bags and accessories and rush off to grab some food. I was hoping to get some information regarding this year's Code Challenge - supposedly to be organised during July? Maybe someone could leave a comment on that - but I couldn't get any updates. Well, I'll keep digging... In case that you would like to get more into git and how to use it effectively, please check out Knowledge 7's upcoming course on "Effective git". Thanks Avinash for your vital input into today's conversation and I'm looking forward to get a grip on your book title very soon. My resume of the day Do not work in IT without any kind of version control system! Seriously, without a VCS in place you're doing it wrong. It's like driving a car without seat belts attached or riding your bike without safety helmet. You don't do that! End of discussion. ;-) Nowadays, having access to free (as in cost) tools to install on your machine and numerous online platforms to host your source code for free for up to five users it's a no-brainer to get yourself familiar with VCS. Today's sessions gave a good overview on how to start using git and how to connect to various remote services like github or VSO.

  Read the article

• Linux - Only first virtual interface can ping external gateway

  - by husvar

  I created 3 virtual interfaces with different mac addresses all linked to the same physical interface. I see that they successfully arp for the gw and they can ping (the request is coming in the packet capture in wireshark). However the ping utility does not count the responses. Does anyone knows the issue? I am running Ubuntu 14.04 in a VmWare. root@ubuntu:~# ip link sh 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000 link/ether 00:0c:29:bc:fc:8b brd ff:ff:ff:ff:ff:ff root@ubuntu:~# ip addr sh 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether 00:0c:29:bc:fc:8b brd ff:ff:ff:ff:ff:ff inet6 fe80::20c:29ff:febc:fc8b/64 scope link valid_lft forever preferred_lft forever root@ubuntu:~# ip route sh root@ubuntu:~# ip link add link eth0 eth0.1 addr 00:00:00:00:00:11 type macvlan root@ubuntu:~# ip link add link eth0 eth0.2 addr 00:00:00:00:00:22 type macvlan root@ubuntu:~# ip link add link eth0 eth0.3 addr 00:00:00:00:00:33 type macvlan root@ubuntu:~# ip -4 link sh 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000 link/ether 00:0c:29:bc:fc:8b brd ff:ff:ff:ff:ff:ff 18: eth0.1@eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default link/ether 00:00:00:00:00:11 brd ff:ff:ff:ff:ff:ff 19: eth0.2@eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default link/ether 00:00:00:00:00:22 brd ff:ff:ff:ff:ff:ff 20: eth0.3@eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default link/ether 00:00:00:00:00:33 brd ff:ff:ff:ff:ff:ff root@ubuntu:~# ip -4 addr sh 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever root@ubuntu:~# ip -4 route sh root@ubuntu:~# dhclient -v eth0.1 Internet Systems Consortium DHCP Client 4.2.4 Copyright 2004-2012 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Listening on LPF/eth0.1/00:00:00:00:00:11 Sending on LPF/eth0.1/00:00:00:00:00:11 Sending on Socket/fallback DHCPDISCOVER on eth0.1 to 255.255.255.255 port 67 interval 3 (xid=0x568eac05) DHCPREQUEST of 192.168.1.145 on eth0.1 to 255.255.255.255 port 67 (xid=0x568eac05) DHCPOFFER of 192.168.1.145 from 192.168.1.254 DHCPACK of 192.168.1.145 from 192.168.1.254 bound to 192.168.1.145 -- renewal in 1473 seconds. root@ubuntu:~# dhclient -v eth0.2 Internet Systems Consortium DHCP Client 4.2.4 Copyright 2004-2012 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Listening on LPF/eth0.2/00:00:00:00:00:22 Sending on LPF/eth0.2/00:00:00:00:00:22 Sending on Socket/fallback DHCPDISCOVER on eth0.2 to 255.255.255.255 port 67 interval 3 (xid=0x21e3114e) DHCPREQUEST of 192.168.1.146 on eth0.2 to 255.255.255.255 port 67 (xid=0x21e3114e) DHCPOFFER of 192.168.1.146 from 192.168.1.254 DHCPACK of 192.168.1.146 from 192.168.1.254 bound to 192.168.1.146 -- renewal in 1366 seconds. root@ubuntu:~# dhclient -v eth0.3 Internet Systems Consortium DHCP Client 4.2.4 Copyright 2004-2012 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Listening on LPF/eth0.3/00:00:00:00:00:33 Sending on LPF/eth0.3/00:00:00:00:00:33 Sending on Socket/fallback DHCPDISCOVER on eth0.3 to 255.255.255.255 port 67 interval 3 (xid=0x11dc5f03) DHCPREQUEST of 192.168.1.147 on eth0.3 to 255.255.255.255 port 67 (xid=0x11dc5f03) DHCPOFFER of 192.168.1.147 from 192.168.1.254 DHCPACK of 192.168.1.147 from 192.168.1.254 bound to 192.168.1.147 -- renewal in 1657 seconds. root@ubuntu:~# ip -4 link sh 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000 link/ether 00:0c:29:bc:fc:8b brd ff:ff:ff:ff:ff:ff 18: eth0.1@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN mode DEFAULT group default link/ether 00:00:00:00:00:11 brd ff:ff:ff:ff:ff:ff 19: eth0.2@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN mode DEFAULT group default link/ether 00:00:00:00:00:22 brd ff:ff:ff:ff:ff:ff 20: eth0.3@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN mode DEFAULT group default link/ether 00:00:00:00:00:33 brd ff:ff:ff:ff:ff:ff root@ubuntu:~# ip -4 addr sh 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever 18: eth0.1@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default inet 192.168.1.145/24 brd 192.168.1.255 scope global eth0.1 valid_lft forever preferred_lft forever 19: eth0.2@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default inet 192.168.1.146/24 brd 192.168.1.255 scope global eth0.2 valid_lft forever preferred_lft forever 20: eth0.3@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default inet 192.168.1.147/24 brd 192.168.1.255 scope global eth0.3 valid_lft forever preferred_lft forever root@ubuntu:~# ip -4 route sh default via 192.168.1.254 dev eth0.1 192.168.1.0/24 dev eth0.1 proto kernel scope link src 192.168.1.145 192.168.1.0/24 dev eth0.2 proto kernel scope link src 192.168.1.146 192.168.1.0/24 dev eth0.3 proto kernel scope link src 192.168.1.147 root@ubuntu:~# arping -c 5 -I eth0.1 192.168.1.254 ARPING 192.168.1.254 from 192.168.1.145 eth0.1 Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 6.936ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 2.986ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 0.654ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 5.137ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 2.426ms Sent 5 probes (1 broadcast(s)) Received 5 response(s) root@ubuntu:~# arping -c 5 -I eth0.2 192.168.1.254 ARPING 192.168.1.254 from 192.168.1.146 eth0.2 Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 5.665ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 3.753ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 16.500ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 3.287ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 32.438ms Sent 5 probes (1 broadcast(s)) Received 5 response(s) root@ubuntu:~# arping -c 5 -I eth0.3 192.168.1.254 ARPING 192.168.1.254 from 192.168.1.147 eth0.3 Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 4.422ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 2.429ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 2.321ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 40.423ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 2.268ms Sent 5 probes (1 broadcast(s)) Received 5 response(s) root@ubuntu:~# tcpdump -n -i eth0.1 -v & [1] 5317 root@ubuntu:~# ping -c5 -q -I eth0.1 192.168.1.254 PING 192.168.1.254 (192.168.1.254) from 192.168.1.145 eth0.1: 56(84) bytes of data. tcpdump: listening on eth0.1, link-type EN10MB (Ethernet), capture size 65535 bytes 13:18:37.612558 IP (tos 0x0, ttl 64, id 2595, offset 0, flags [DF], proto ICMP (1), length 84) 192.168.1.145 > 192.168.1.254: ICMP echo request, id 5318, seq 2, length 64 13:18:37.618864 IP (tos 0x68, ttl 64, id 14493, offset 0, flags [none], proto ICMP (1), length 84) 192.168.1.254 > 192.168.1.145: ICMP echo reply, id 5318, seq 2, length 64 13:18:37.743650 ARP, Ethernet (len 6), IPv4 (len 4), Request who-has 192.168.1.87 tell 192.168.1.86, length 46 13:18:38.134997 IP (tos 0x0, ttl 128, id 23547, offset 0, flags [none], proto UDP (17), length 229) 192.168.1.86.138 > 192.168.1.255.138: NBT UDP PACKET(138) 13:18:38.614580 IP (tos 0x0, ttl 64, id 2596, offset 0, flags [DF], proto ICMP (1), length 84) 192.168.1.145 > 192.168.1.254: ICMP echo request, id 5318, seq 3, length 64 13:18:38.793479 IP (tos 0x68, ttl 64, id 14495, offset 0, flags [none], proto ICMP (1), length 84) 192.168.1.254 > 192.168.1.145: ICMP echo reply, id 5318, seq 3, length 64 13:18:39.151282 IP6 (class 0x68, hlim 255, next-header ICMPv6 (58) payload length: 32) fe80::5a98:35ff:fe57:e070 > ff02::1:ff6b:e9b4: [icmp6 sum ok] ICMP6, neighbor solicitation, length 32, who has 2001:818:d812:da00:8ae3:abff:fe6b:e9b4 source link-address option (1), length 8 (1): 58:98:35:57:a0:70 13:18:39.615612 IP (tos 0x0, ttl 64, id 2597, offset 0, flags [DF], proto ICMP (1), length 84) 192.168.1.145 > 192.168.1.254: ICMP echo request, id 5318, seq 4, length 64 13:18:39.746981 IP (tos 0x68, ttl 64, id 14496, offset 0, flags [none], proto ICMP (1), length 84) 192.168.1.254 > 192.168.1.145: ICMP echo reply, id 5318, seq 4, length 64 --- 192.168.1.254 ping statistics --- 5 packets transmitted, 5 received, 0% packet loss, time 4008ms rtt min/avg/max/mdev = 2.793/67.810/178.934/73.108 ms root@ubuntu:~# killall tcpdump >> /dev/null 2>&1 9 packets captured 12 packets received by filter 0 packets dropped by kernel [1]+ Done tcpdump -n -i eth0.1 -v root@ubuntu:~# tcpdump -n -i eth0.2 -v & [1] 5320 root@ubuntu:~# ping -c5 -q -I eth0.2 192.168.1.254 PING 192.168.1.254 (192.168.1.254) from 192.168.1.146 eth0.2: 56(84) bytes of data. tcpdump: listening on eth0.2, link-type EN10MB (Ethernet), capture size 65535 bytes 13:18:41.536874 ARP, Ethernet (len 6), IPv4 (len 4), Reply 192.168.1.254 is-at 58:98:35:57:a0:70, length 46 13:18:41.536933 IP (tos 0x0, ttl 64, id 2599, offset 0, flags [DF], proto ICMP (1), length 84) 192.168.1.146 > 192.168.1.254: ICMP echo request, id 5321, seq 1, length 64 13:18:41.539255 IP (tos 0x68, ttl 64, id 14507, offset 0, flags [none], proto ICMP (1), length 84) 192.168.1.254 > 192.168.1.146: ICMP echo reply, id 5321, seq 1, length 64 13:18:42.127715 ARP, Ethernet (len 6), IPv4 (len 4), Request who-has 192.168.1.87 tell 192.168.1.86, length 46 13:18:42.511725 IP (tos 0x0, ttl 64, id 2600, offset 0, flags [DF], proto ICMP (1), length 84) 192.168.1.146 > 192.168.1.254: ICMP echo request, id 5321, seq 2, length 64 13:18:42.514385 IP (tos 0x68, ttl 64, id 14527, offset 0, flags [none], proto ICMP (1), length 84) 192.168.1.254 > 192.168.1.146: ICMP echo reply, id 5321, seq 2, length 64 13:18:42.743856 ARP, Ethernet (len 6), IPv4 (len 4), Request who-has 192.168.1.87 tell 192.168.1.86, length 46 13:18:43.511727 IP (tos 0x0, ttl 64, id 2601, offset 0, flags [DF], proto ICMP (1), length 84) 192.168.1.146 > 192.168.1.254: ICMP echo request, id 5321, seq 3, length 64 13:18:43.513768 IP (tos 0x68, ttl 64, id 14528, offset 0, flags [none], proto ICMP (1), length 84) 192.168.1.254 > 192.168.1.146: ICMP echo reply, id 5321, seq 3, length 64 13:18:43.637598 IP (tos 0x0, ttl 128, id 23551, offset 0, flags [none], proto UDP (17), length 225) 192.168.1.86.17500 > 255.255.255.255.17500: UDP, length 197 13:18:43.641185 IP (tos 0x0, ttl 128, id 23552, offset 0, flags [none], proto UDP (17), length 225) 192.168.1.86.17500 > 192.168.1.255.17500: UDP, length 197 13:18:43.641201 IP (tos 0x0, ttl 128, id 23553, offset 0, flags [none], proto UDP (17), length 225) 192.168.1.86.17500 > 255.255.255.255.17500: UDP, length 197 13:18:43.743890 ARP, Ethernet (len 6), IPv4 (len 4), Request who-has 192.168.1.87 tell 192.168.1.86, length 46 13:18:44.510758 IP (tos 0x0, ttl 64, id 2602, offset 0, flags [DF], proto ICMP (1), length 84) 192.168.1.146 > 192.168.1.254: ICMP echo request, id 5321, seq 4, length 64 13:18:44.512892 IP (tos 0x68, ttl 64, id 14538, offset 0, flags [none], proto ICMP (1), length 84) 192.168.1.254 > 192.168.1.146: ICMP echo reply, id 5321, seq 4, length 64 13:18:45.510794 IP (tos 0x0, ttl 64, id 2603, offset 0, flags [DF], proto ICMP (1), length 84) 192.168.1.146 > 192.168.1.254: ICMP echo request, id 5321, seq 5, length 64 13:18:45.519701 IP (tos 0x68, ttl 64, id 14539, offset 0, flags [none], proto ICMP (1), length 84) 192.168.1.254 > 192.168.1.146: ICMP echo reply, id 5321, seq 5, length 64 13:18:49.287554 IP6 (class 0x68, hlim 255, next-header ICMPv6 (58) payload length: 32) fe80::5a98:35ff:fe57:e070 > ff02::1:ff6b:e9b4: [icmp6 sum ok] ICMP6, neighbor solicitation, length 32, who has 2001:818:d812:da00:8ae3:abff:fe6b:e9b4 source link-address option (1), length 8 (1): 58:98:35:57:a0:70 13:18:50.013463 IP (tos 0x0, ttl 255, id 50737, offset 0, flags [DF], proto UDP (17), length 73) 192.168.1.146.5353 > 224.0.0.251.5353: 0 [2q] PTR (QM)? _ipps._tcp.local. PTR (QM)? _ipp._tcp.local. (45) 13:18:50.218874 IP6 (class 0x68, hlim 255, next-header ICMPv6 (58) payload length: 32) fe80::5a98:35ff:fe57:e070 > ff02::1:ff6b:e9b4: [icmp6 sum ok] ICMP6, neighbor solicitation, length 32, who has 2001:818:d812:da00:8ae3:abff:fe6b:e9b4 source link-address option (1), length 8 (1): 58:98:35:57:a0:70 13:18:51.129961 IP6 (class 0x68, hlim 255, next-header ICMPv6 (58) payload length: 32) fe80::5a98:35ff:fe57:e070 > ff02::1:ff6b:e9b4: [icmp6 sum ok] ICMP6, neighbor solicitation, length 32, who has 2001:818:d812:da00:8ae3:abff:fe6b:e9b4 source link-address option (1), length 8 (1): 58:98:35:57:a0:70 13:18:52.197074 IP6 (hlim 255, next-header UDP (17) payload length: 53) 2001:818:d812:da00:200:ff:fe00:22.5353 > ff02::fb.5353: [udp sum ok] 0 [2q] PTR (QM)? _ipps._tcp.local. PTR (QM)? _ipp._tcp.local. (45) 13:18:54.128240 ARP, Ethernet (len 6), IPv4 (len 4), Request who-has 192.168.1.87 tell 192.168.1.86, length 46 --- 192.168.1.254 ping statistics --- 5 packets transmitted, 0 received, 100% packet loss, time 4000ms root@ubuntu:~# killall tcpdump >> /dev/null 2>&1 13:18:54.657731 IP6 (class 0x68, hlim 255, next-header ICMPv6 (58) payload length: 32) fe80::5a98:35ff:fe57:e070 > ff02::1:ff6b:e9b4: [icmp6 sum ok] ICMP6, neighbor solicitation, length 32, who has 2001:818:d812:da00:8ae3:abff:fe6b:e9b4 source link-address option (1), length 8 (1): 58:98:35:57:a0:70 13:18:54.743174 ARP, Ethernet (len 6), IPv4 (len 4), Request who-has 192.168.1.87 tell 192.168.1.86, length 46 25 packets captured 26 packets received by filter 0 packets dropped by kernel [1]+ Done tcpdump -n -i eth0.2 -v root@ubuntu:~# tcpdump -n -i eth0.3 icmp & [1] 5324 root@ubuntu:~# ping -c5 -q -I eth0.3 192.168.1.254 PING 192.168.1.254 (192.168.1.254) from 192.168.1.147 eth0.3: 56(84) bytes of data. tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on eth0.3, link-type EN10MB (Ethernet), capture size 65535 bytes 13:18:56.373434 IP 192.168.1.147 > 192.168.1.254: ICMP echo request, id 5325, seq 1, length 64 13:18:57.372116 IP 192.168.1.147 > 192.168.1.254: ICMP echo request, id 5325, seq 2, length 64 13:18:57.381263 IP 192.168.1.254 > 192.168.1.147: ICMP echo reply, id 5325, seq 2, length 64 13:18:58.371141 IP 192.168.1.147 > 192.168.1.254: ICMP echo request, id 5325, seq 3, length 64 13:18:58.373275 IP 192.168.1.254 > 192.168.1.147: ICMP echo reply, id 5325, seq 3, length 64 13:18:59.371165 IP 192.168.1.147 > 192.168.1.254: ICMP echo request, id 5325, seq 4, length 64 13:18:59.373259 IP 192.168.1.254 > 192.168.1.147: ICMP echo reply, id 5325, seq 4, length 64 13:19:00.371211 IP 192.168.1.147 > 192.168.1.254: ICMP echo request, id 5325, seq 5, length 64 13:19:00.373278 IP 192.168.1.254 > 192.168.1.147: ICMP echo reply, id 5325, seq 5, length 64 --- 192.168.1.254 ping statistics --- 5 packets transmitted, 1 received, 80% packet loss, time 4001ms rtt min/avg/max/mdev = 13.666/13.666/13.666/0.000 ms root@ubuntu:~# killall tcpdump >> /dev/null 2>&1 9 packets captured 10 packets received by filter 0 packets dropped by kernel [1]+ Done tcpdump -n -i eth0.3 icmp root@ubuntu:~# arp -n Address HWtype HWaddress Flags Mask Iface 192.168.1.254 ether 58:98:35:57:a0:70 C eth0.1 192.168.1.254 ether 58:98:35:57:a0:70 C eth0.2 192.168.1.254 ether 58:98:35:57:a0:70 C eth0.3

  Read the article

• Adobe Reader unusably slow on Mac OS X 10.6.6

  - by vwegert

  We've got two Macs that are both running 10.6.6. On my MBP, Adobe (Acrobat) Reader started behaving weird a few weeks ago. It became very sluggish, started missing mouse clicks or mouse button releases, scrolling was next to impossible. Most of the time it does not handle Page Up / Page Down events at all. Zooming works erratically if at all. It's basically unusable. On the other Mac (an iMac), there are no such problems. I've tried to remove and reinstall Adobe Reader as well as upgrading to the latest version, but unfortunately without success. This is the only software that is behaving strangely on this Mac, everything else is working fine. What else could I try?

  Read the article

• Trouble using remote desktop when connected via Cisco VPN

  - by Kyle B.

  I just setup my Cisco VPN and everything appears to be working fine. I opened the 'remote desktop' application and am unable to connect to my work desktop machine. When I disable Windows Firewall, I am able to connect, but not when Firewall is enabled. Is there a specific settings inside Windows 7 Firewall that should I be enabling or disabling for this to work without having to shut down the entire system? I can post this in superuser.com instead if you feel it belongs there, but posted here due to it being related to VPN and Firewall. Thanks, Kyle

  Read the article

• How to remove HDD Low virus

  - by samsudeen

  “HDD Low virus” is a new  fake system optimizer application which started affecting all  the Windows ( XP, vista, Windows 7) based computers world wide starting from Monday. It gets installed to the computers without notice by passing all our antivirus software. The infected computers will suddenly popup a system error  similar to the below screen shot and tries to shut down the computer.   Though the major anti virus companies have not yet release an update for this virus, We can easily remove this virus using the below steps Steps to remove HDD Low virus Press Alt+Ctrl+Delete and go the the Task Manager -> Process and kill the process with name [random number].exe ( e.g 123410.exe) Go to Run -> type msconfig to launch the System Configuration utility. In the Start up Tab un check  all the services with random name (e.g jygkgs.exe) and note folder path of the service in the Command column. Go to that folder path and delete all the exe files with random name manually ( It is recommended to use command prompt to delete the files) Delete all the HDD low files in the below path %Desktop%\HDD Low.lnk %Programs%\HDD Low\Uninstall HDD Low.lnk %Programs%\HDD Low\HDD Low.lnk Open registry using Run-> regedit.exe search for the below key and delete software\Microsoft\Windows\CurrentVersion\Run [random number].exe” Restart the computer Also update your anti virus definition and run a full scan of your computer to remove any affected files. This article titled,How to remove HDD Low virus, was originally published at Tech Dreams. Grab our rss feed or fan us on Facebook to get updates from us.

  Read the article

• Can ISC dhcpd operate as a proxy dhcp server for PXE boot?

  - by Matt

  I have an existing LAN with a DHCP server already dishing out IP addresses. For various reasons I cannot replace that server so it will still need to dish out IP addresses. I've been experimenting with dnsmasq in proxy mode to provide PXE boot filenames. Now I have dnsmasq chainloading iPXE ok, but I found that the problem with dnsmasq is that in proxy mode it won't send dhcp options down. So I can't seem to send option 17 to boot iscsi san. I read somewhere that it's not enabled in the source code. Oh well, so I thought perhaps I should try isc dhcpd (default version4 with ubuntu). But I can't find any configuration examples that work as a proxy. Does isc dhcpd even work in proxy mode? examples on the web imply patching the source. What other options do I have?

  Read the article

• Replacement mouse "feet"?

  - by Jeff Atwood

  The plastic skid pad "feet" on the bottom of my Logitech G9 mouse (which I love!) are getting rather worn down -- to the point that the outer shell of the mouse scrapes on the mousepad a bit. I've had the mouse for about ~2 years now so it does get a lot (I mean lot of use). But, I hate to buy a new mouse when I only need replacement "feet". Where can I obtain replacement mouse feet? Is this even possible?

  Read the article

• How to implement curved movement while tracking the appropriate angle?

  - by Vexille

  I'm currently coding a 2D top-down car game which will be turn-based. And since it's turn-based, the cars won't be controlled directly (i.e. with a simple velocity vector that adjusts its angle when the player wants to turn), but instead it's movement path has to be planned beforehand, and then the car needs to follow the path when the turn ends (think Steambirds). This question has some interesting information, but its focus is on homing-missile behaviour, which I kinda had figured out, but doesn't really apply to my case, I think, since I need to show a preview of the path when the player is planning his turn, then have the car follow that path. In that same question, there's an excellent answer by Andrew Russel which mentions Equations of Motion and Bézier's Curve. Some of his other suggestions of implementation are specific to XNA though, so they don't help much (I'm using Marmalade SDK). If I assume Bézier's Curve as the solution of choice, I'm left with one specific problem: I'll have the car's position (the first endpoint) and the target/final position (the last endpoint), but what should I use as the control point (assuming a square/quadratic curve)? And whether I use Bézier's Curve or another parametric equation, I'd still be left with another issue: the car can't just follow the curve, it must turn (i.e. adjust its angle) accordingly. So how can I figure out which way the car should be pointing to at any given point in the curve?

  Read the article

• Why PC reboots when there’s a power failure even with UPS?

  - by Jamil

  I've purchased a Line Interactive UPS 1200VA. It's supposed to give 8~20min backup (as written in the manual). This UPS has transfer time < 10ms. It works fine when the mains is active. But the problem is that when the power went off, the PC also went off for a fraction of a second and started rebooting. The strangest thing though is that it has to be a proper power failure by the service supplier. If I just turn off the power at the wall plug, the UPS kicks in immediately and the PC carries on working fine. What's the solution of that? What should I do? My hard drive was physically damaged because of improper shut down & restart. I've 5~8 times power outage in my country so I badly need an UPS.

  Read the article

< Previous Page | 290 291 292 293 294 295 296 297 298 299 300 301  | Next Page >