Search Results

Search found 35892 results on 1436 pages for 'a different ben'.

Page 295/1436 | < Previous Page | 291 292 293 294 295 296 297 298 299 300 301 302  | Next Page >

• arp across subnets which devices can be detected?

  - by Gobliins

  i have some devices connected in the same physical network (LAN) but in different subnets. I want to detect them all with the ARP from my computer. My Computer is also in the same physical network but on a different subnet. ! The devices have no arp protocol installed (yet). Is it possible to detect the devices (with or withour ARP installed on every device)? If the devices have a MAC-address but no IP-address, can ARP still detect the machines?

  Read the article

• Load-balanced Linux server across internet?

  - by LinuxGnut

  I'm investigating setting up a load balanced server solution consisting of three CentOS 5.4 boxes. Two of these boxes will reside in one facility, while a third will reside in a different facility. I'm currently working to set up heartbeat, ldirectord, ipvsadm to load-balance the machines, but I'm not sure its going to work with I'm not overly familiar with the details behind how all of these work, but is the load balancing going to work correctly when these servers are not all on the same LAN? I'm not sure if heartbeat is using SNMP to send signals or not, which would only work over a LAN. Has anyone tried this or found a different solution?

  Read the article

• Computer refuses to POST

  - by TheX

  Computer refuses to POST. What it will do is the fan spins up, and the lights come on on the motherboard, but other then that it just sits there and laughs in my face! Here is what I have done... I have tried 2 different video cards, both known to work, 4 different sticks of RAM in all four ram slots, 2 processors (known to work), and 2 power supplies (known to work). The only constant is the motherboard... The Motherboard is a Asus m3a3-mvp deluxe. Anyone have any other ideas? Also, I have bread boarded it to make sure there where no shorts (taken everything out of the case and tried again).

  Read the article

• Setting up linux server with multiple access rights

  - by Mark

  I am a graduate student and want to set up a linux server (preferably Ubuntu) in my office. I also want to give my friends SSH access to that box. My question is can I set up my server such that I can give one of my friends rights to install software on my machine but he cannot brows around outside the directory he is allowed to? Can I set up multiple apache instances (on different ports) for different people? so each has access to their own apache instance?

  Read the article

• Ubuntu in Virtualbox - web server very slow when using local IP address

  - by Lenny Marnham

  I'm using Ubuntu (Lucid Lynx) to learn Ruby On Rails. I'm running Ubuntu in VirtualBox (the host is Windows 7 Ultimate), using bridged networking. When I run my Rails app and point the browser at it using localhost:3000, the app responds immediately and my page is rendered in a second or two. However, if I use 10.0.0.5:3000 (where 10.0.0.5 is my IP address reported using ifconfig), the response from my rails app is incredibly slow - maybe 30 seconds or more for the server to respond and render the page. This happens in both Firefox and Chrome. Also, when I hit the Rails app from the host (to test it in IE), I get the same slooooooow response. Any ideas what might be going on? I've tried it with two different routers, and on two different networks (work and home) with the same result. Cheers all.

  Read the article

• Should I choose KVM/XEN over OpenVZ or use them together?

  - by Krystian

  I've got a dual xeon e5504 server, with [for now] only 8GB of ram. Storage is'n impressive either: 3x 146GB sas in raid5 + 500GB sata drives. Currently it works as a development server, but it's over speced for our needs and since our development methods changed through last 2 years we decided it will work as a production system for some of our applications + we would like to have a separate system for testing/research. Our apps are mainly web apps deployed on tomcats [plural as some of the apps require older versions] and connected to Postgres. I would like to have a production system, where only httpd+tomcat+db are setup and nothing else runs there. Sterile system. Apart from that, I would like a test system, where I can play with different JVM settings, deploy my test apps, play with tomcat/httpd settings and restart them without interfering with the production system. Apart from that, I would like to be able to play with different linux flavors, with newer kernels to test how they work etc. I know, this is not possible with OpenVZ and I would have to choose KVM for that. I am thinking about merging the two, and setting up a KVM to be able to work with different systems [linux only to be frank] + use openVZ to setup separate machines for my development needs. I would simply go with that, but reading here and there about the performance impact full virtualization has over containers and looking at the specs of my server makes me think twice about it. I don't want to loose too much performance, especially because of the nature of my apps [few JVMs running at the same time]. It will be my first time with virtualization, apart from using desktop virtualbox/vmserver. Although I am a fast learner I don't want to mess with the main system so much that it will break the production apps or make them crawl. Although they are more or less internal apps and they don't produce much load, they need to be stable. I've read, that KVM host is a normal linux installation and it allows to run normal processes on it. If that is so, does it allow to run openVZ as well? I mean... can I have KVM and OpenVZ running on the same system/kernel? Or do I have to setup another system to run OpenVZ containers? How much performance impact can this have for me? Will my hardware suffice? oh and one more thing... unfortunately I'm quite limited with the funds... I'm looking for a free solution only :/

  Read the article

• IPSec VPN IP addresses

  - by Randomblue

  I have an IPSec VPN on my Windows 7 machine (all using the native Windows 7 gateway). The host I am connecting to has different ISAKMP "Phase 1" and "Phase 2" IP addresses. As I understand, the Phase 1 address is that of the IPsec endpoint, to which I can connect just fine. The Phase 2 address is found in their "crypto map", and the addresses need to match. At the moment, both my Phase 1 and Phase 2 addresses are configured the same. On my side, I get the error "Error 791: The L2TP connection attempt failed because security policy for the connection was not found" How can I configure the Phase 2 IP address for my Windows 7 IPSec VPN to be different to the IPSec endpoint address?

  Read the article

• Looking for a video media player program that saves colour/volume profiles for individual videos?

  - by verve

  I use VLC right now but I'm tired of having 24 VLC players open because I watch that many different things each week so I just leave them open indefinitely; having to set each one up with the different colour/brightness/volume when the computer crashes is time-consuming. Also, having those many players open gets crazy. Is a good video media player available that lets you create or save profiles for videos watched or going to watched such as colour/brightness/volume? Windows 7 64-bit. Freeware or paid?

  Read the article

• Solaris 10: Identify a PID and the CPU it's running on

  - by Marcus

  I have multiple instances of a database running on a Solaris system. I'd like to prove that each database process is being handled by a different CPU. Essentially, I want to be able to do something like a ps -ef | grep <process_name> to get the PIDs and then run another command (if required) to identify the CPU... Is prstat able to do this? I'm making an assumption that as each database instance is started each one uses a different CPU. I'm not sure if I'm understanding this correctly... The reason I want to do this is because Sun hardware has slow CPU's, but lots of them. Therefore, to get the best performance out of it, I need to try and spread the load among CPU's... Thanks

  Read the article

• Solaris 10: Identify a PID and the CPU it's running on

  - by Marcus

  I have multiple instances of a database running on a Solaris system. I'd like to prove that each database process is being handled by a different CPU. Essentially, I want to be able to do something like a ps -ef | grep <process_name> to get the PIDs and then run another command (if required) to identify the CPU... Is prstat able to do this? I'm making an assumption that as each database instance is started each one uses a different CPU. I'm not sure if I'm understanding this correctly... The reason I want to do this is because Sun hardware has slow CPU's, but lots of them. Therefore, to get the best performance out of it, I need to try and spread the load among CPU's... Thanks

  Read the article

• How do I use rsync to sync my repo on my mac to university server where I have ssh access?

  - by snihalani

  I need to use my university's ssh access and run my programs there for testing. I don't have sudo access there. It doesn't have vncserver there either. I would work with vim and make but I need git at least. Now I am looking into rsync to sync my current source directory into a remote directory and I'll ssh into the directory and run my make file to test it. I am looking at the man page of rsync and it looks very complicated. Can anyone please help me with this? I have googled in superuser and all commands seem different for different cases. Can anyone please help me with this?

  Read the article

• Batch file to open multiple cmd prompts

  - by JHarris

  I am trying to write a batch file that will automate the following manual process: Open a new cmd prompt (prompt1) Run a bat file (b1) Run a program (that will continue to run) Minimize prompt1 Open a new cmd prompt (prompt2) Run a bat file (b1) Run a different program (that will continue to run) Minimize prompt2 I've found ways to open multiple instances of cmd to run different things, but after I've run the first thing (b1), I then need to run a program in that same cmd window. I currently have start /min cmd /k C:\Users\db2admin\python_environment\Scripts\activate.bat start /min cmd /k C:\Users\db2admin\python_environment\Scripts\activate.bat This opens the two windows and runs the bat, great, but now I need to execute another command (running a python file) in each of the cmd windows. How do I send commands to each prompt?

  Read the article

• Do I have a bad SD card?

  - by User1

  I'm trying to copy data from my computer to an SD card. After a few hundred megs, I keep getting the following errors in dmesg: [34542.836192] end_request: I/O error, dev mmcblk0, sector 855936 [34542.836284] FAT: unable to read inode block for updating (i_pos 13694981) [34542.836306] MMC: killing requests for dead queue [34542.836310] end_request: I/O error, dev mmcblk0, sector 9280 [34542.837035] FAT: unable to read inode block for updating (i_pos 148486) [34542.837062] MMC: killing requests for dead queue [34542.837066] end_request: I/O error, dev mmcblk0, sector 1 [34542.837074] FAT: bread failed in fat_clusters_flush [34542.837085] MMC: killing requests for dead queue These were all files I copied from a smaller SD card. I just want to transfer them to my new, larger card for my phone. I tried the same experiment with different files on a different machine and the card failed again. Reading data from the old card went fine. My systems are older and the new SD card is new (16GB Class 4). Could this be that my computers are too old? Is there a definitive test to verify if my SD card is bad?

  Read the article

• Connecting via url to a server that is on the same network as me

  - by Axehead

  Good day, I'm having problems with the ftp server I've just set up. I've already managed to configure my modem and wireless router to open up port 21 and setup ftp in my server. But It seems that when I try to connect to it when I'm in the same network as the server via URL, (ftp://mydomain.com) it redirects me to the modem's web interface. But then when I try to connect to it outside the network using a different internet connection. It succeeds. It also succeeds when I'm in the same network and I go to ftp://192.168.., the server's local IP. Am I supposed to adjust something in the modem or router? Or is this a different problem altogether? BTW I'm using Windows Server 2008 r2 as my server's OS and using IIS for ftp.

  Read the article

• How can I organize my video collection and update meta data?

  - by Pieter Breed

  I have a large collection of downloaded video files containing different movies, tv shows and music videos. I have a FreeNAS box set up that uses Fuppes as a UPnP media server. My media player on Windows correctly detects this UPnP collection and can stream from it fine. However, All of my music videos, tv shows and movies are all sorted under the same 'Videos' group. I would like to seperate the different types of video files so that they can correctly go under 'Recorded TV' or whatever the case may be. Any ideas? I guess I am looking for something like an MP3Tagger but for video files?

  Read the article

• Intercepting LAN network traffic via WiFi

  - by user1613655

  Let's get straight to the point. This is my fictive network architecture: My question is: Would it be possible for Laptop B to intercept traffic sent and received by Laptop A? Please note that B only has WiFi access and no physical control over Router B. Furthermore, Router A and B create different wireless networks with different encryption keys. If both shared the same wireless network or Laptop B had LAN-access to Router B, the answer would be trivial, but I'm not sure how the answer turns out in this scenario :-/ Thanks for your valuable help!

  Read the article

• How can I make .vimrc read from an external file?

  - by GorillaSandwich

  I'd like to modify my .vimrc to read the value of a variable from an external file. How can I do this? Specifically, a friend and I share a git repo with our .vim files, but there are a few small differences in what we want in our configs. So most of the file is common, but we use if statements to determine whether to load user-specific sections, like this: let whoami = "user2" if whoami == "user1" ... After checking our common .vimrc out of source control, we each have to change the let whoami assignment so our own section will be loaded. Instead, I'd like to keep a separate file, which can be different for each of us, and from which vim will load that variable value. Maybe another angle on this is: Will vim automatically read all the files in my .vim directory? If so, we could each put a symlink in there called username.vim, and link that to an external file that would be different for each of us.

  Read the article

• macports apache,php,db, how do I test on another device?

  - by brokenindexfinger

  My supervisor suggests using macports to install/manage different versions of apache and php, as well as both mysql and posgres databases. The idea is that we need to test our platform on different versions of each. So far I've just been using the default apache installation on osx lion, and the default postgres installation. My question is this: once I turn Web Sharing off, and proceed with a custom apache2 setup based in /opt/local/, how do I broadcast my machine's IP to other devices, for testing? With Web Sharing, I can get my machine's IP and use that to test with an iPad and iPhone. Will that still be the case, and if so, how do I do it?

  Read the article

• Network speeds being report as 4x higher than actual in Windows 7 SP1

  - by Synetech

  Ever since installing Windows 7 SP1, I have noticed that all programs that display my network transfer rate have been exactly 4x higher than they actually are. For example, when I download something from a high-bandwidth web site or through torrents with lots of sources, the download rate indicated is is ~5MBps (~40Mbps) even though my Internet connection has a maximum of only 1.5MBps (12Mbps). It is the same situation with the upstream bandwidth: the connection maximum is 64KBps, but I’m seeing up to 256KBps. I have tried several different programs for monitoring bandwidth throughput and they all give the same results. I also tried different times and different days, and they always show the rate as being four times too high. My initial thought was that my ISP had increased the speeds (without my noticing), which they have done before. However, I checked my ISP’s site and they have not increased the speeds. Moreover, when I look at the speeds in the program actually doing the transfer (eg Chrome, µTorrent, etc.), the numbers are in line with the expected values at the same time that bandwidth monitoring programs are showing the high numbers. The only significant change (and pretty much the only change at all) that has occurred to my system since the change was the installation of SP1 for Windows 7. As such, it is my belief that some sort of change exists in SP1 whereby software that accesses the bandwidth via a specific API receives (erroneously?) high numbers while others that have access to the raw data continue to receive the correct values. I booted into Windows XP and downloaded some things via HTTP and torrent and in both cases, the numbers were as expected (like they were in Windows 7 before installing SP1). I then booted back into 7SP1 and once again, the numbers were four times higher than possible. Therefore it is definitely something in SP1 that has changed how local bandwidth is calculated/returned. There is definitely something wonky with Windows 7 SP1’s network speed calculation. I tried Googling this, but (for multiple reasons), have had a difficult time finding anything relevant. Has anybody else noticed this behavior? Does anybody know of any bugs or changes in SP1 that could account for it?

  Read the article

• Git Repo to mantain the app configurations in several servers

  - by user62904

  Hi! I need to versioning in a GIT repository, configurations of a particular platform, spread across multiple servers. Take into account that in each of these servers there are completely different configurations, while the application is the same. What is the best way to do this? Create a branch for each server repository.git:conf -- [branch Server 1] repository.git:conf -- [branch Server 2] repository.git:conf -- [branch Server N] Note: This method seems to me, that is difficult to maintain because each change in the server configurations, I need to create subbranches which becomes confusing. Create a single repo with a different directory for each server repository.git:conf/Server 1 repository.git:conf/Server 2 repository.git:conf/Server N Note: This is easy to mantain Create a repo for each server repository_1.git:conf repository_2.git:conf repository_N.git:conf Note: This method requires me to create a branch for each new server. There are other methods, what are the best practices in this case? Should I use the one that I feel most comfortable? Tks, Gulden PT

  Read the article

• Setting up VPS hosting

  - by RobinFTW

  I'm trying to set up my own vps hosting. It wont be a paid service, just an experiment for me and some nerdy friends. What I'd like to be able to do is this: Run multiple virtual servers on 1 external IP. These servers can run anything from Minecraft servers to simple http servers. They will also need to be accessible thru SSH. What I don't get is how I can address these servers using domain names. I've done some research and found out that I could use Vhosts with Apache. However this only applies to http servers. It was also suggested I'd use a reverse proxy(squid) but this also only applies to http requests. I could just use different ports for different servers, but thats not ideal and not what I want. Can someone suggest a setup? Maybe some tutorials or anything.

  Read the article

• How to synchronize tasks on multiple computers

  - by SysGen

  I would like to be able to run similar tasks on several computers that must be precisely synced. More specifically I need 4 laptops to be synced, probably over local network, and I need to use one of them to start a task (play a video) on all of them at the same time (different video files on different laptops). All of them are running Windows. Is there a third-party software or any easier way to do so over LAN without significant delay? I need virtually no response time - if there would be a single video streaming on all laptops then people should not recognize the delay.

  Read the article

• How can I move a window that cannot be moved by mouse?

  - by Michael

  I have downloaded a version of Finale Notepad on Windows 7. When I first used it it functioned perfectly. Every time I opened it a popup asking me about downloading a different version would show up that I could just click out of. When the pop up appeared I was unable to quit out of the window or move it at all, but it posed no issue. Apparently, though, the last time I quit out of the program, the screen must have been dragged down below my taskbar. Now, I am unable to quit out of the popup when I reopen the program, meaning I can't access it at all. I tried restarting my computer, uninstalling the program, downloading different versions of the program, and even using alternate methods of moving it, such as Alt+Tab, but nothing works.

  Read the article

• Own mediawiki/wikipedia naming convention for pages

  - by Andy M

  I recently installed a mediawiki at home and I'm looking for a way to name pages. Let's say I have the following structure : Main - Dev - C# - Tips Main - Cooking - Mexixan Cooking - Tips Main - Annoying my girlfriend - Tips Each final page is a different Tips page. Naming them only "tips" won't work because I need three different pages. Now, I could name each of my tips page with its "path" (ex: main_cooking_mexican_cooking_tips) but it looks cumbersome and the problem is that, whenever I'll change the structure of my mediawiki, some pages will need to change their name in order to be corrects. Does it exist some convention to follow regarding this ? Thanks for your help !

  Read the article

• Hide the ports in the url of a tomcat application

  - by S.M.09

  I have setup tomcat 6 on a server with several different instances which run on different ports For Eg: http://10.XXX.XXX.XXX:8080/myAPP1 http://10.XXX.XXX.XXX:8088/myAPP2 http://10.XXX.XXX.XXX:8082/myAPP3 and so on... These urls are available two the users using these and other applications Now I want to hide the ports on which each of the applications are running... So that the user could see only something like this http://10.XXX.XXX.XXX/myAPP1 http://10.XXX.XXX.XXX/myAPP2 http://10.XXX.XXX.XXX/myAPP3 What is needed to be done for this I have achieved this for one url (i.e. one port) using the firewall rules and redirect the request on HTTP 80 port to the port that tomcat is listening.. But I want such patter to appear for all the urls... How can I go about this? Specs HOST M/C : 64 bit OS: Linux Redhat Tomcat : 6.0

  Read the article

< Previous Page | 291 292 293 294 295 296 297 298 299 300 301 302  | Next Page >