Search Results

Search found 10050 results on 402 pages for 'graphics card'.

Page 295/402 | < Previous Page | 291 292 293 294 295 296 297 298 299 300 301 302  | Next Page >

  • Does PCI bus really occupy 1.8GB

    - by Neil
    I am using a Dell Vostro 1700 laptop which currently has 2GB of RAM. I was considering buying some more memory to upgrade it to 4GB. I am running 32 bit Windows Vista and I know that there can be issues that prevent it from making use of a full 4GB which I believe relate to the fact that memory mapped devices, e.g. graphics card, also need to be allocated addresses in the 4GB range addressable with 32 bits. Consequently I was looking at device manager - resources by connection - memory to see what devices where allocated what memory addresses. I was surprised to see that there was an entry for [80000000 - F3FFFFFF] PCI bus. That is a 1.8GB range of addresses. When I expanded it the only thing in it was [E0000000 - EFFFFFFF] NVIDIA GeForce 8600M GT which is only 256MB. So my question is does the PCI bus really occupy 1.8GB of address space and will it prevent my computer from making use of any more memory than it already has.

    Read the article

  • Can DVI look different?

    - by queueoverflow
    I have a desktop with an nVidia GT 9500 which has two DVI slots. I have a 24" TN-Panel TFT on that and it looks pretty good. Then I hooked it onto the DisplayPort of my ThinkPad with the Intel HD 3000 card with an DP-DVI adapter and I think that the fonts look even clearer. Both computers run Kubuntu 12.04, although the ThinkPad is freshly set up, while the desktop is migrated from the previous release. Is this a hardware thing or is it just some setting in the anti-aliasing or sub-pixel-hinting?

    Read the article

  • Black screen on Windows 7 right after opening Google Sketchup or Minecraft

    - by Aero
    I get a black screen on Windows 7 right after opening Google Sketchup or Minecraft. I presume there are other applications that cause this too - but I have not tried to open them. The window initially stops responding for a few seconds, before I get a black screen and my Skype call ends abruptly. I have tried waiting for a few minutes but nothing happens. I have to power down my computer and then boot it up again. This is becoming an annoyance, and I don't know what's causing it. Here are my specs, if it helps: My graphics card is an ATI RADEON XPRESS 1100. If you need any more info or if I've missed anything please ask. Thanks :-)

    Read the article

  • Hylafax with serial over IP modem

    - by zero_r
    I'm looking into virtualizing a Hylafax server which currently runs on a dedicated hardware running CentOS with a Divalogic card. The main issue obviously is, how to connect the modem to the VM. There are serial over IP devices available at digi.com. Maybe there are others? Regarding digi.com devices, as far as I understood one can install the RealPort software and then have a /dev/ttySx device presented to the Linux server. This device then can be used as serial connection to the modem. Does someone have such a configuration in place? Or does someone have another idea to virtualize a Hylafax server (outbound faxes only). Thank you in advance

    Read the article

  • Force Windows 8 Metro apps to run lower resolutions below 1024x768?

    - by piokuc
    I have installed Windows 8 Consumer Preview on my Samsung NB30 netbook. I was very excited to try it on this little box cause it has a touchscreen and Windows 8 is supposed to be optimized for touchscreen devices. The installation was quick and smooth and all the drivers seem to work well including the one for the touchscreen. There is one major problem, though: when I try to tap one of the tiles on the Metro UI it displays This app can't open. The screen resolution is too low for this app to run. The machine has Intel Atom N450 processor and Intel GMA 3159 integrated graphics card and has maximum resolution 1024x600. I've read that Metro requires at least 1024x768. Is there a solution to this problem? Is there a way to force Windows 8 Metro apps to run in lower resolutions?

    Read the article

  • Unauthorized computer use via keyboard or remote access?

    - by brydaverambo
    I’m suspecting my computer is being used when I’m not at home. This is happening either physically or remotely. My wireless switch is off. Is there any way possible to detect and/or monitor activity without purchasing software? My settings are being changed as well as passwords (Bios PW was changed and I cannot access Bios settings). I connect via the network cable. Is it possible for someone (in range) to connect to my laptop even if the wireless switch is off? This is a Dell Inspiron 1720 with the WLAN 1395 card. Here’s the kicker. When I try to download freeware for monitoring activity, I am not allowed to do this! ????

    Read the article

  • My Router is fast when i reset it but slows down seconds later

    - by hglocke
    I have a Belkin N wireless router which until recently worked perfectly fine. Now i have to reset the router every few minutes, otherwise it slows down to a crawl. What can I do? I have tried turning the routers firewall off, but it does not make any difference. As far as I'm aware there have been no recent firmware updates. EDIT: The other devices on my network (laptop and iphone) do not have this problem. I connect to the router using a TP-Link wireless network card and I have already tried uninstalling and installing the driver. Hopefully this will narrow down the problem significantly.

    Read the article

  • How to find all photos taken in April - any April?

    - by Mawg
    I have 100+ gB of photos going back 25 years. They are arranged in a directory tree by category, with nested sub-directories. How can I make a search for all photos taken in a given month, say April, in any of those directories? I don't think that a Windows search will work as that will probably be the file creation data, which could be a month or two later wen I finally more the files from SD card to PC. Perhaps searching the EXIF data? Is there a free program which can do that?

    Read the article

  • Is there a way to adjust colors of a specific window?

    - by Synetech
    Is there a (Windows) program or something that will allow the user to adjust the brightness/contrast/gamma of a specific window rather than the whole screen? As a use-case scenario, imagine having a web-page showing on one half of the screen, and another program taking up the rest of the screen. This other program uses the default Windows colors (e.g., white background), so it may be glaringly bright. Alternately, the web-page may be too dark to see. Adjusting the monitor or video-card settings would affect everything which will be no good. Adjusting the default Windows colors is, at best, inconvenient. Instead, there needs to be a way to set the colors of one of the windows to equalize the whole screen.

    Read the article

  • Deploying virtual machines - Windows Guest/Linux Host or vice versa?

    - by samoz
    I'm looking to deploy several virtual machines for users. They need access to both Windows and Linux. They also need to use the computers graphics card (for Photoshop, modeling, etc) under Windows. My question is, will an Ubuntu host/Windows guest or a Windows host/Ubuntu guest be faster? I'm somewhat worried about Windows getting a cluttered registry and slow, but on the otherhand, a Windows host would have direct access to hardware (Unless I'm just unaware of how to grant hardware access to a guest). Does the choice of software (VMware or VirtualBox) effect the choice?

    Read the article

  • If I double my ram on a x86 processor, does that double the ram I can use for each individual process?

    - by Derek Reitz
    I don't understand how 32-Bit OS's use RAM on a per process basis. I've read the max RAM my x86 processor running a 32-bit OS can use is 2^32 = 4gb; but that's just for one process, right? 3DS Max keeps crashing, but it typically can never use more than 2GB of RAM before it crashes, if I increase my RAM from 4-8GB, would that double how much RAM I can use for each individual process or actually cause no change in my performance? Also would increasing my VRAM and getting a better graphics card increase the extent to which individual programs can preform? Lastly, is there any way to upgrade a 86-bit processor to be able to run a 64-bit OS? I feel like it would be ridiculous to sell modern processors that are capped at 4GB of RAM? Thanks. Quad-Core Intel i7 Q 720 @ 1.6GHz

    Read the article

  • Oval collision detection not working properly

    - by William
    So I'm trying to implement a test where a oval can connect with a circle, but it's not working. edist = (float) Math.sqrt(Math.pow((px + ((pwidth/2) )) - (bx + (bsize/2)), 2) + Math.pow(-((py + ((pwidth/2)) ) - (bx + (bsize/2))), 2)); and here is the full code (requires Slick2D): import org.newdawn.slick.AppGameContainer; import org.newdawn.slick.BasicGame; import org.newdawn.slick.Color; import org.newdawn.slick.GameContainer; import org.newdawn.slick.Graphics; import org.newdawn.slick.Input; import org.newdawn.slick.SlickException; public class ColTest extends BasicGame{ float px = 50; float py = 50; float pheight = 50; float pwidth = 50; float bx = 200; float by = 200; float bsize = 200; float edist; float pspeed = 3; Input input; public ColTest() { super("ColTest"); } @Override public void init(GameContainer gc) throws SlickException { } @Override public void update(GameContainer gc, int delta) throws SlickException { input = gc.getInput(); try{ if(input.isKeyDown(Input.KEY_UP)) py-=pspeed; if(input.isKeyDown(Input.KEY_DOWN)) py+=pspeed; if(input.isKeyDown(Input.KEY_LEFT)) px-=pspeed; if(input.isKeyDown(Input.KEY_RIGHT)) px+=pspeed; } catch(Exception e){} } public void render(GameContainer gc, Graphics g) throws SlickException { g.setColor(new Color(255,255,255)); g.drawString("col: " + col(), 10, 10); g.drawString("edist: " + edist + " dist: " + dist, 10, 100); g.fillRect(px, py, pwidth, pheight); g.setColor(new Color(255,0,255)); g.fillOval(px, py, pwidth, pheight); g.setColor(new Color(255,255,255)); g.fillOval(200, 200, 200, 200); } public boolean col(){ edist = (float) Math.sqrt(Math.pow((px + ((pwidth/2) )) - (bx + (bsize/2)), 2) + Math.pow(-((py + ((pwidth/2)) ) - (bx + (bsize/2))), 2)); if(edist <= (bsize/2) + (px + (pwidth/2))) return true; else return false; } public float rotate(float x, float y, float ox, float oy, float a, boolean b) { float dst = (float) Math.sqrt(Math.pow(x-ox,2.0)+ Math.pow(y-oy,2.0)); float oa = (float) Math.atan2(y-oy,x-ox); if(b) return (float) Math.cos(oa + Math.toRadians(a))*dst+ox; else return (float) Math.sin(oa + Math.toRadians(a))*dst+oy; } public static void main(String[] args) throws SlickException { AppGameContainer app = new AppGameContainer( new ColTest() ); app.setShowFPS(false); app.setAlwaysRender(true); app.setTargetFrameRate(60); app.setDisplayMode(800, 600, false); app.start(); } }

    Read the article

  • Clarification of the difference between PCI memory addressing and I/O addressing?

    - by KevinM
    Could someone please clarify the difference between memory and I/O addresses on the PCI/PCIe bus? I understand that I/O addresses are 32-bit, limited to the range 0 to 4GB, and do not map onto system memory (RAM), and that memory addresses are either 32-bit or 64-bit. I get the impression that memory addressing must map onto available RAM, is this true? That if a PCI device wishes to transfer data to a memory address, that address must exist in actual system RAM (and is allocated during PCI configuration) and not virtual memory. So if a PCI device only needs to transfer a small amount of data at a time, where there is no advantage to putting it into RAM or using DMA, then I/O addressing is fine (e.g. a parallel port implemented on a PCI card). And why do I keep reading that PCI/PCIe I/O addressing is being deprecated in favour of memory addressing? Thanks!

    Read the article

  • writting becomes slow after few writes

    - by user1566277
    I am running an embedded Linux on arm with a SD-Card. While writing huge amounts of data I see bizarre effects. E.g, when I dd a 15 MB file few times, it writes the file (normally) in less than 2 Secs. But After lets say 3-4 times it takes sometimes 15 to 30 Seconds to write the same file. If I sync after writing the file, then this does not happen but sync takes long time too. If there is enough gap between writing two files than presumably kernel syncs itself. How can I optimize the whole performance so that write should always finish inside 2 Seconds. The File system I am using is ext3. Any pointers?

    Read the article

  • How to get headphones and speakers working at the same time?

    - by Borek
    I have a Gigabyte P55-UD3 motherboard which comes with a Realtek sound card and audio header for the front panel. My headset is permanently connected to the front panel (mic in, headphones in) and I also have speakers connected at the rear of the computer. What I want to achieve is that both the headphones and the speakers work at the same time. On my old PC with Realtek, I was able to do this by clicking "Device advanced settings" in the Realtek HD Audio Manager and then clicking "Make front and rear output devices playback two different audio streams simultaneously" and then doing some reassigning of front/rear settings in the Realtek Audio Manager (can't remember the details). But that doesn't seem to be working now - either the speakers play sounds or the headphones, not both at the same time. To pose the question differently, Windows plays the sounds on the "default device". I'd like to make both headphones and the speakers kind of like the default devices.

    Read the article

  • Remote Desktop connection breaks the wireless connection

    - by Michal Talaga
    When I connect to my Windows 8 Professional machine via Remote Desktop (RDP) I almost always get my WiFi connection broken. The setup: T61P Lenovo Laptop + W8 at home Wireless Router with NAT forwards connections to that machine Windows 7 laptop at work connecting to the home laptop When I connect, very often I get to login and suddenly connection is lost and I cannot reconnect again. When I get home I find my WiFi connection is still connected to the Access Point but does not function. Can't even ping the router. What is strange is that disabling wireless with the hardware switch and enabling it again doesn't help. The only way to make it works again: - Reboot - Disable wifi with hardware switch AND disable the network card in Device Manager, then enable both I did not have this problem on the very same laptop when it was running Windows 7. Any hint how can I find where the problem is?

    Read the article

  • Win XP cannot connect (or see) my wifi network, but can see others

    - by Jorre
    since yesterday I have a strange wifi problem with my pc. I have a wireless linksys router setup that worked fine for many months, now since yesterday my pc won't connect to the wifi signal anymore. The strange thing is, my macbook pro still connects fine. SSID is broadcasting, but my windows XP doens't see it, I have all signal modes set to "auto". Windows XP sees all my neighbours wifi networks, so the wifi card isn't broken or anything. Any idea what can be wrong here?

    Read the article

  • Daemon Tools error (0xc0000006)

    - by Roberts
    I tried to reinstall Windows XP to Windows 7, but I could not install the video card drivers because the driver installation software only works on XP.I have launched the setup program with XP mode. After I installed the setup, I restarted the computer and Windows 7 wasn't booting.But that isn't the problem why I asked this question. The problem is that I have reinstalled my Windows 7 Ultimate to Windows XP SP3 and I wanted to install Dameon Tools.After installation I restarted the PC (as the setup wanted) and when the Daemon Tools launches it shows the error: Application failed to initialize properly (0xc0000006). Click OK to terminate the application.

    Read the article

  • Win Server 2008 R2 - Mapped shared folder hanging?

    - by M-Tech
    I have recently built a windows 2008 server R2 machine. This is purely for file server purposes and is very much a basic build. All windows updates installed and part of domain. I have setup a shared folder on the C:Drive and added permissions for domain users as co-owners. The client machines run XP SP3 and are part of the domain also. We have a few servers running the same setups on a few of our sites but this one is particular crashes users machines (explorer.exe hangs for at least a few mins) when attempting to access the shared folder. I have turned off the option on the network card for power save aswell still no change. Any help with this is very much appreciated and i look forward to hearing from you ;)

    Read the article

  • Can I run Ubuntu directly under Windows 8?

    - by huahsin68
    Text below is extract from the article, Windows 8 Tip: Virtualize with Hyper-V. Better still, Windows Virtual PC offered a feature called XP Mode, free for users of Windows 7 Professional, Enterprise, and Ultimate, which included a full working copy of Windows XP with Service Pack 3. But the big deal here is that as you installed applications in the virtual copy of XP, they would be made available through Windows 7’s Start Menu. And you could run these applications, side-by-side, with Windows 7 applications on the Windows 7 desktop. It was a seamless, integrated experience, ideal for those one-off application compatibility issues. I was thinking to install VirtualBox in Windows 8 and then run Ubuntu as guess OS. Since Hyper-V is a Type-0 hipervisor, may I know does this bring the same benefit if I have Ubuntu Linux install as a virtual guess OS? Meaning, if I turning the Ubuntu on (the guess OS), does the Ubuntu still able to access the hardware information like nVidia display card or processor information? I'm just curious to know can this be done?

    Read the article

  • DVI monitor detected only on computer startup

    - by kamil
    I've recently connected a new monitor, LG M2252D-PZ, to a rather outdated computer with Windows XP and Radeon 9600. XP has SP3 installed, video drivers are the latest version back from the times the video card was still supported. My problem is that the monitor works fine only as long as I don't turn it off or switch it to a different input. When I turn it back on, it says "no signal". The key to the problem must be the DVI port, to which the new monitor is connected. The previous monitor was connected to the VGA output, and I've tested that the new one also works fine when connected to the analogue port. Apparently, the computer tests for the presence of a monitor on the DVI port only on startup. The question is, how do I change this?

    Read the article

  • Games + Closed Lid = Hibernation

    - by Isaac Rabinovitch
    I have an ASUS N53S that I mainly bought for its RAM capacity. (I run a lot of VMs.) But as a bonus, it came with a fancy ATI video card. So I decided to install GTA 4 and plug it into a big monitor and settle down for some casual mayhem. But after about 5 minutes, it goes into hibernation! What gives? Since I was using an external monitor and didn't need the keyboard (using an XBox controller) I closed the lid on the laptop. Gaming is compute-intensive, so my GPU and CPU were both working hard and generating heat. Closing the lid interfered with cooling. Since I have the laptop configured to hibernate when I press the power button, the heat-triggered shutdown caused hibernation.

    Read the article

  • What is OpenSVC?

    - by sh-beta
    OpenSVC was just ported to the FreeBSD platform. The little blurb in that announcement intrigued me so I went to the OpenSVC website and found this: OpenSVC is a 'service' manager, as in clustered service manager, designed for real-world heterogeneous datacenters and large-scale operations orchestrator (disaster recovery, for example). Services are collections of resources (virtual machine, ip, disk groups, filesystems, file synchronizations, and application launchers). Services can be started, stopped and queried for status, providing a consistent command set for wildly different service integration types. Service configurations, status and logs are pushed to a central database coupled to a web front-end (collector). Services can be administered using the stand-alone GPLv2 software stack deployed on the nodes (nodeware), or through the web-front end. Plus some UML-type graphics. Which is all neat, but I still don't understand: what does it do? Am I just being dense? What's the use case for this system?

    Read the article

  • Logcat error: "addView(View, LayoutParams) is not supported in AdapterView" in a ListView

    - by HacKreatorz
    I'm doing an aplication for Android and something I need is that it shows a list of all files and directories in the SD Card and it has to be able to move through the different directories. I found a good tutorial in anddev: http://bit.ly/h4GyFC I modified a few things so the aplication moves in the SD Card and not in Android root Directories but the rest is mostly the same. This is my xml file for the activity: <?xml version="1.0" encoding="utf-8"?> <ListView xmlns:android="http://schemas.android.com/apk/res/android" android:id="@id/android:list" android:layout_width="fill_parent" android:layout_height="fill_parent"> <TextView android:layout_width="fill_parent" android:layout_height="wrap_content" /> </ListView> And this is the code for the Activity: import hackreatorz.cifrador.R; import java.io.File; import java.util.ArrayList; import android.app.ListActivity; import android.content.res.Configuration; import android.os.Bundle; import android.view.View; import android.widget.ArrayAdapter; import android.widget.ListView; import android.widget.Toast; public class ArchivosSD extends ListActivity { private ArrayList<String> directoryEntries = new ArrayList<String>(); private File currentDirectory = new File("/sdcard/"); @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); browseToSD(); } @Override public void onConfigurationChanged(Configuration newConfig) { super.onConfigurationChanged(newConfig); } private void browseToSD() { browseTo(new File("/sdcard/")); } private void upOneLevel() { if(this.currentDirectory.getParent() != null) this.browseTo(this.currentDirectory.getParentFile()); } private void browseTo(final File directory) { if (directory.isDirectory()) { this.currentDirectory = directory; fill(directory.listFiles()); } else { Toast.makeText(ArchivosSD.this, this.directoryEntries.get(this.getSelectedItemPosition()), Toast.LENGTH_SHORT).show(); } } private void fill(File[] files) { this.directoryEntries.clear(); this.directoryEntries.add(getString(R.string.current_dir)); if(this.currentDirectory.getParent() != null) this.directoryEntries.add(getString(R.string.up_one_level)); int currentPathStringLength = (int) this.currentDirectory.getAbsoluteFile().length(); for (File file : files) { this.directoryEntries.add(file.getAbsolutePath().substring(currentPathStringLength)); } setListAdapter(new ArrayAdapter<String>(this, R.layout.archivos_sd, this.directoryEntries)); } @Override protected void onListItemClick(ListView l, View v, int position, long id) { int selectionRowID = (int) this.getSelectedItemPosition(); String selectedFileString = this.directoryEntries.get(selectionRowID); if (selectedFileString.equals(".")) { this.browseToSD(); } else if(selectedFileString.equals("..")) { this.upOneLevel(); } else { File clickedFile = null; clickedFile = new File(this.currentDirectory.getAbsolutePath() + this.directoryEntries.get(selectionRowID)); if(clickedFile != null) this.browseTo(clickedFile); } } } I don't get any errores in Eclipse, but I get a Force Close when running the aplication on my phone and when I look at Logcat I see the following: 01-01 23:30:29.858: ERROR/AndroidRuntime(14911): FATAL EXCEPTION: main *01-01 23:30:29.858: ERROR/AndroidRuntime(14911): java.lang.UnsupportedOperationException: addView(View, LayoutParams) is not supported in AdapterView* I don't have a clue what to do, I've looked up in Google and I didn't find anything and I did the same at stackoverflow. This is my first aplication in Java and for Android so I'm a real n00b and if the answer was there, I didn't understand it so I would really apreciate if you could explain what I should do to fix this error and why. Thanks for everything in advanced.

    Read the article

  • Windows 7 - all usb devices go to sleep im idle mode

    - by dvdx
    A strange thing happened after a few updates to the system: Intel rapid storage SSD firmware update Intel Ethernet adapter update GPU Intel update When the computer turns off the screen (after 5 min), an unknown time later, all the USB devices stop working. Sound card Mouse Keybord etc. I can't turn them back on, so I can't wake up the screen or do anything except turn the computer off and back on. I checked my power save profile and all is OK there. I changed in the Device Manager, the Allow USB to sleep in all the hubs. How can I fix this??

    Read the article

< Previous Page | 291 292 293 294 295 296 297 298 299 300 301 302  | Next Page >