Search Results

Search found 8543 results on 342 pages for 'documentation'.

Page 296/342 | < Previous Page | 292 293 294 295 296 297 298 299 300 301 302 303  | Next Page >

• redirect web app results to own application

  - by vbNewbie

  Is it possible to redirect a web apps results to a second application? I cannot parse the html source. It contains the javascript functions that execute the queries but all the content is probably server side. I hope this makes sense. The owner has made the script available but I am not sure how this helps. Can I using .net call the site and redirect results perhaps to a file or database? the app accesses one of googles apis and performs searches/queries and returns results which are displayed on the site. Now all the javascript functions that perform these queries are listed in the source but I do not know javascript so it does not make much sense to me. I have used the documentation which uses the oauth protocol to access the api and have implemented that in my web app but it took me nearly a week to get the request token right and now to send requests to the api, sometimes I get one result back and sometimes none. It is frustrating me and the owner of the web app has given use of his script but he says all that happens is that my browser interacts with the google api and not his server. So I thought why not have my web app call his, since his interacts with the API flawlessly and have the results sent to my app to save in a database. I have very little experience here so pardon my ignorance

  Read the article

• Question about how AppFabric's cache feature can be used.

  - by Kevin Buchan

  Question about how AppFabric's cache feature can be used. I apologize for asking a question that I should be able to answer from the documentation, but I have read and read and searched and cannot answer this question, which leads me to believe that I have a fundamentally flawed understanding of what AppFabric's caching capabilities are intended for. I work for a geographically disperse company. We have a particular application that was originally written as a client/server application. It’s so massive and business critical that we want to baby step converting it to a better architected solution. One of the ideas we had was to convert the app to read its data using WCF calls to a co-located web server that would cache communication with the database in the United States. The nature of the application is such that everyone will tend to be viewing the same 2000 records or so with only occasional updates and those updates will be made by a limited set of users. I was hoping that AppFabric’s cache mechanism would allow me to set up one global cache and when a user in Asia, for example, requested data that was not in the cache or was stale that the web server would read from the database in the USA, provide the data to the user, then update the cache which would propagate that data to the other web servers so that they would know not to go back to the database themselves. Can AppFabric work this way or should I just have the servers retrieve their own data from the database?

  Read the article

• Fastest reliable way for Clojure (Java) and Ruby apps to communicate

  - by jkndrkn

  Hi There, We have cloud-hosted (RackSpace cloud) Ruby and Java apps that will interact as follows: Ruby app sends a request to Java app. Request consists of map structure containing strings, integers, other maps, and lists (analogous to JSON). Java app analyzes data and sends reply to Ruby App. We are interested in evaluating both messaging formats (JSON, Buffer Protocols, Thrift, etc.) as well as message transmission channels/techniques (sockets, message queues, RPC, REST, SOAP, etc.) Our criteria: Short round-trip time. Low round-trip-time standard deviation. (We understand that garbage collection pauses and network usage spikes can affect this value). High availability. Scalability (we may want to have multiple instances of Ruby and Java app exchanging point-to-point messages in the future). Ease of debugging and profiling. Good documentation and community support. Bonus points for Clojure support. What combination of message format and transmission method would you recommend? Why? I've gathered here some materials we have already collected for review: Comparison of various java serialization options Comparison of Thrift and Protocol Buffers (old) Comparison of various data interchange formats Comparison of Thrift and Protocol Buffers Fallacies of Protocol Buffers RPC features Discussion of RPC in the context of AMQP (Message-Queueing) Comparison of RPC and message-passing in distributed systems (pdf) Criticism of RPC from perspective of message-passing fan Overview of Avro from Ruby programmer perspective

  Read the article

• boost::asio::io_service throws exception

  - by Ace

  Okay, I seriously cannot figure this out. I have a DLL project in MSVC that is attempting to use Asio (from Boost 1.45.0), but whenever I create my io_service, an exception is thrown. Here is what I am doing for testing purposes: void run() { boost::this_thread::sleep(boost::posix_time::seconds(5)); try { boost::asio::io_service io_service; } catch (std::exception & e) { MessageBox(NULL, e.what(), "Exception", MB_OK); } } BOOL WINAPI DllMain(HINSTANCE hinstDLL, DWORD fdwReason, LPVOID lpvReserved) { if (fdwReason == DLL_PROCESS_ATTACH) { boost::thread thread(run); } return TRUE; } This is what the message box shows: winsock: WSAStartup cannot function at this time because the underlying system it uses to provide network services is currently unavailable Here is what MSDN says about it (error code 10091, WSASYSNOTREADY): Network subsystem is unavailable. This error is returned by WSAStartup if the Windows Sockets implementation cannot function at because the underlying system it uses to provide network services is currently unavailable. Users should check: That the appropriate Windows Sockets DLL file is in the current path. That they are not trying to use more than one Windows Sockets implementation simultaneously. If there is more than one Winsock DLL on your system, be sure the first one in the path is appropriate for the network subsystem currently loaded. The Windows Sockets implementation documentation to be sure all necessary components are currently installed and configured correctly. Yet none of this seems to apply to me (or so I think). Here is my command line: /O2 /GL /D "_WIN32_WINNT=0x0501" /D "_WINDLL" /FD /EHsc /MD /Gy /Fo"Release\" /Fd"Release\vc90.pdb" /W3 /WX /nologo /c /TP /errorReport:prompt If anyone knows what might be wrong, please help me out! Thanks.

  Read the article

• How to reset the context to the original rectangle after clipping it for drawing?

  - by mystify

  I try to draw a sequence of pattern images (different repeated patterns in one view). So what I did is this, in a loop: CGContextRef context = UIGraphicsGetCurrentContext(); // clip to the drawing rectangle to draw the pattern for this portion of the view CGContextClipToRect(context, drawingRect); // the first call here works fine... but for the next nothing will be drawn CGContextDrawTiledImage(context, CGRectMake(0, 0, 2, 31), [img CGImage]); I think that after I've clipped the context to draw the pattern in the specific rectangle, I cut out a snippet from the big canvas and the next time, my canvas is gone. can't cut out another snippet. So I must reset that clipping somehow in order to be able to draw another pattern again somewhere else? Edit: In the documentation I found this: CGContextClip: "... Therefore, to re-enlarge the paintable area by restoring the clipping path to a prior state, you must save the graphics state before you clip and restore the graphics state after you’ve completed any clipped drawing. ..." Well then, how to store the graphics state before clipping and how to restore it?

  Read the article

• encode array to JSON in PHP to get [elm1,elm2,elm3] instead of {elm1:{},elm2:{},elm3:{}}

  - by Itay Moav

  I am trying to json_encode an array, which is what returns from a Zend_DB query. var_dump gives: (Manually adding 0 member does not change the picture). array(3) { [1]=> array(3) { ["comment_id"]=> string(1) "1" ["erasable"]=> string(1) "1" ["comment"]=> string(6) "test 1" } [2]=> array(3) { ["comment_id"]=> string(1) "2" ["erasable"]=> string(1) "1" ["comment"]=> string(6) "test 1" } [3]=> array(3) { ["comment_id"]=> string(1) "3" ["erasable"]=> string(1) "1" ["comment"]=> string(6) "jhghjg" } } The encoded string looks: {"1":{"comment_id":"1","erasable":"1","comment":"test 1"}, "2":{"comment_id":"2","erasable":"1","comment":"test 1"}, "3":{"comment_id":"3","erasable":"1","comment":"jhghjg"}} While I need it as: [{"comment_id":"1","erasable":"1","comment":"test 1"}, {"comment_id":"2","erasable":"1","comment":"test 1"}, {"comment_id":"3","erasable":"1","comment":"jhghjg"}] As the php.ini/json__encode documentation says it should. Any ideas?

  Read the article

• Basic formatting. sed, or cut, or what?

  - by dsclough

  Very new to this whole Unix thing. I'm currently using korn shell to try and format some lines of text. My input has a couple of lines that look something like this Date/Time :- Monday June 03 00:00:00 EDT 2013 Host Name :- HostNameHere PIDS :- NumbersNLetters Product Name :- ProductName The desired output would be as follows: Date/Time="Monday June 03 00:00:00 EDT 2013" HostName="HostNameHere" PIDS="NumbersNLetters" ProductName="ProductName" So, I need to get rid of any spaces in the leftmost column, and throw everything in the rightmost column between quotations. I've looked at the cut command, and got this far: Cut -f 1,2 -d - Which might produce a result like Date/Time:Monday June 03 00:00:00 EDT 2013, which is close to what I want, but not quite. I wasn't sure if cut could let me add parentheses, and it doesn't look like I can remove spaces that way either. sed seems like it might be closer to the answer, but I wasn't able to find through googling how I might just look for any pattern and not a specific one. I apologize for the incredibly basic question, but reading documentation only gets you so far before your brain starts to ache... If there are any better resources I should be looking at I would be happy to get pointed in the right direction. Thanks!

  Read the article

• How do I reference an instance of a class using its tag?

  - by Matt Winters

  I have several instances of a UIControl class Foo being instantiated, one instance corresponding to each cell in a UITableView. The Class has: BOOL selected; UIImageView *imageView; UIImage *imageOne; UIImage *imageTwo; I've assigned each instance a tag: foo.tag = indexPath.row; I would now like to reference the UIImageView.image for a (or several) specific instance(s) by its tag to switch it to the other image. In my search I've seen things like classes being assigned tags using initWithTag (I assume they're assigning tags)... SomeClass *someClass = [[SomeClass alloc]initWithTag:1 ... [someArray addObject: [[SomeClass alloc]initWithTag:2 ... [someArray addObject: [[SomeClass alloc]initWithTag:3 ... ...but I haven't seen how they are later referenced by that tag. I have seen a reference to getChildByTag which had promise, but I can't find it in the documentation or examples (maybe not iphone). Does anyone know how reference the imageView.image within an instance using its tag? Thanks

  Read the article

• Installing Image_Graph and using with BASE

  - by PPowerHouseK

  Hello all, I have Windows 7 with the latest XAMPP installation. I configured BASE to work, for the most part. My problem is that in BASE, when I click on the graph alerts button, I get this error: Error loading the Graphing library: Check your Pear::Image_Graph installation! * Image_Graph can be found here:at http://pear.veggerby.dk/. Without this library no graphing operations can be performed. * Make sure PEAR libraries can be found by php at all: pear config-show | grep "PEAR directory" PEAR directory php_dir /usr/share/pear This path must be part of the include path of php (cf. /etc/php.ini): php -i | grep "include_path" include_path => .:/usr/share/pear:/usr/share/php => .:/usr/share/pear:/usr/share/php</code> I think it may have to do with the include path of the php.ini so here is what it currently says: ;;;;;;;;;;;;;;;;;;;;;;;;; ; Paths and Directories ; ;;;;;;;;;;;;;;;;;;;;;;;;; ; UNIX: "/path1:/path2" ;include_path = ".:/php/includes" ; ; Windows: "\path1;\path2" ;include_path = ".;c:\php\includes" ; ; PHP's default setting for include_path is ".;/path/to/php/pear" ; http://php.net/include-path include_path = ".;C:\xampp\php\PEAR" I am really at a loss as to how to resolve this. I searched for a while for some documentation but most referred to installing on ubuntu. I don't know any pear or php, so if you know how to fix this please explain thoroughly. I am willing to supply as much information as needed.

  Read the article

• Rails - Dynamic name routes namespace

  - by Kuro

  Hi, Using Rails 2.3, I'm trying to configure my routes but I uncounter some difficulties. I would like to have something like : http:// mydomain.com/mycontroller/myaction/myid That should respond with controllers in :front namespace http:// mydomain.com/aname/mycontroller/myaction/mydi That should respond with controllers in :custom namespace I try something like this, but I'm totaly wrong : map.namespace :front, :path_prefix => "" do |f| f.root :controller => :home, :action => :index f.resources :home ... end map.namespace :custom, :path_prefix => "" do |m| m.root :controller => :home, :action => :index m.resources :home ... m.match ':sub_url/site/:controller/:action/:id' m.match ':sub_url/site/:controller/:action/:id' m.match ':sub_url/site/:controller/:action/:id.:format' m.match ':sub_url/site/:controller/:action.:format' end I put matching instruction in custom namespace but I'm not sure it's the right place for it. I think I really don't get the way to customize fields in url matching and I don't know how to find documentation about Rails 2.3, most of my research drove me to Rails 3 doc about the topic... Somebody to help me ?

  Read the article

• GetLongPathName Undeclared

  - by iwizardpro

  When I try to compile my code with the function GetLongPathName(), the compiler tells me that the function is undeclared. I have already read the MSDN documentation located @ http://msdn.microsoft.com/en-us/library/aa364980%28VS.85%29.aspx. But, even though I included those header files, I am still getting the undeclared function error. Which header file(s) am I supposed to include when using the function? #include <Windows.h> #include <WinBase.h> #define DLLEXPORT extern "C" __declspec(dllexport) DLLEXPORT char* file_get_long(char* path_original) { long length = 0; TCHAR* buffer = NULL; if(!path_original) { return "-10"; } length = GetLongPathName(path_original, NULL, 0); if(length == 0) { return "-10"; } buffer = new TCHAR[length]; length = GetLongPathName(path_original, buffer, length); if(length == 0) { return "-10"; } return buffer; } And, if it makes a difference, I am currently compiling using Dev-C++ on a Windows Vista 64-bit.

  Read the article

• Need a design approach or suggestion for a simple structure using Servlet.

  - by akshay

  Hi I have to design such that whenever user pass a query I process it using servlet and then call the js page to draw the chart 1 user writes a query on a page 2 the page call the servelt class public class MyServlet extends Httpservlet implements DataSourceServlet {..... return data The user see a beautiful string like this.. google.visualization.Query.setResponse......... /Tiger'},{v:80.0}, {v:false}]}]}}); 3 when the user hits on different html page myhtml.js it draws the chart. I want the Myservlet class itself call the myhtml.js page and draw the chart directly. and want to eliminate the beautiful string google.visualization.Query.setResponse......... /Tiger'},{v:80.0}, {v:false}]}]}}); from coming on user's browser What should i do? I tried using functions to call another page like request dispatcher(), redirect() calling myhtml.js page directly after myservlet process the query results. But i get the result like this google.visualization.Query.setResponse......... /Tiger'},{v:80.0}, {v:false}]}]}}); and the entire myhtml.js code page below it on the browsers that to without the chart been draw. Is there anyway to element the beautiful string from coming on clients browser and only show them the chart been drawn ? :) This is the small tutorial i am following http://code.google.com/apis/visualization/documentation/dev/dsl_get_started.html

  Read the article

• GNU Makefile: multiple outputs from single rule + preventing intermediate files from being deleted

  - by makesaurus

  This is sort of a continuation of question from link text. The problem is that there is a rule generating multiple outputs from a single input, and the command is time-consuming so we would prefer to avoid recomputation. Now there is an additional twist, that we want to keep files from being deleted as intermediate files, and rules involve wildcards to allow for parameters. The solution suggested was that we set up the following rule: file-a.out: program file.in ./program file.in file-a.out file-b.out file-c.out file-b.out: file-a.out @ file-c.out: file-b.out @ Then, calling make file-c.out creates both and we avoid issues with running make in parallel with -j switch. All fine so far. The problem is the following. Because the above solution sets up a chain in the DAG, make considers it differently; the files file-a.out and file-b.out are treated as intermediate files, and they by default get deleted as unnecessary as soon as file-c.out is ready. A way of avoiding that was mentioned somewhere here, and consists of adding file-a.out and file-b.out as dependencies of a target .SECONDARY, which keeps them from being deleted. Unfortunately, this does not solve my case because my rules use wildcard patters; specifically, my rules look more like this: file-a-%.out: program file.in ./program $* file.in file-a-$*.out file-b-$*.out file-c-$*.out file-b-%.out: file-a-%.out @ file-c-%.out: file-b-%.out @ so that one can pass a parameter that gets included in the file name, for example by running make file-c-12.out The solution that make documentation suggests is to add these as implicit rules to the list of dependencies of .PRECIOUS, thus keeping these files from being deleted. The solution with .PRECIOUS works, but it also prevents these files from being deleted when a rule fails and files are incomplete. Is there any other way to make this work?

  Read the article

• What do you call a generalized (non-GUI-related) "Model-View-Controller" architecture?

  - by dcuccia

  I am currently refactoring code that coordinates multiple hardware components for data acquisition, and feeling a bit like I'm recreating the wheel. In particular, an MVC-like pattern seems to be emerging. Except, this has nothing to do with a GUI and I'm worried that I'm forcing this particular pattern where another might be more appropriate. Here's my scenario: Individual hardware "component" classes obey interface contracts for each hardware type. Previously, component instances were orchestrated by a single monolithic InstrumentController class, which relied heavily on configuration + branching logic for executing a specific acquisition sequence. After an iteration, I have a separate controller for each component, with these controllers all managed by a small InstrumentControllerBase (or its derivatives). The composite system will receive "input" either programmatically or via inter-hardware component triggering - in either case these interactions are routed to, and handled by, the appropriate controller. So, I have something that feels MVC-esque, but I don't know if that's because I'm forcing the point. With little direct MVC experience in application development, it's hard to know if I'm just trying to make my scenario fit MVC, where another pattern might be a good alternative or complimentary. My problem is, search results and wiki documentation of these family of patterns seems to immediately drop me into GUI-specific discussions. I understand "M means Model data and the V means View" - but do you call the superset pattern? Component-Commander-Controller? Whence can I exhume examples exemplary?

  Read the article

• Convert IIS / Tomcat Web Application to a multi-server environment.

  - by bill_the_loser

  I have an existing web application built in .Net, running on IIS that leverages a java servlet that we have running on Tomcat 5.5. We need to scale the application and I'm confused about what relates to our situation and what we need to do to get the servlet running on multiple servers. Right now I have 4 servers that can each individually process results, it almost seems like all I should have to do is add the ajp13 worker processes from three additional machines to the machine hosting the load balancer worker. But I can't imagine it should be that easy. What do I need to do to distribute the Tomcat load to the extra three machines? Thanks. Update: The current configuration is using a workers2.properties configuration file. From all of the documentation online I have not been able to determine the distinction between the workers.properties and the workers2.properties. Most of the examples that I have found are configuring the workers.properties and revolve around adding workers and registering them in the worker.list element. The workers2.properties does not appears to have a worker.list element and the syntax is different enough between the workers.properties and the workers2.properties that I'm doubtful that I can add that element. If I just add my multiple AJP workers to the workers2.properties file do I need to worry about the apparent lack of a worker.list element? [ajp13:localhost:8009] channel=channel.socket:localhost:8009 group=lb [ajp13:host2.mydomain.local:8009] channel=channel.socket:host2.mydomain.local:8009 group=lb [ajp13:host3.mydomain.local:8009] channel=channel.socket:host3.mydomain.local:8009 group=lb A couple of side notes... One I've noticed that sometime Tomcat doesn't seem to reload my changes and I don't know why. Also, I have no idea why this configuration has a workers2.properties and not a workers.properties. I've been assuming that it's based on version but I haven't seen anything to back up that assumption.

  Read the article

• Python 2.6 does not like appending to existing archives in zip files

  - by user313661

  Hello, In some Python unit tests of a program I'm working on we use in-memory zipfiles for end to end tests. In SetUp() we create a simple zip file, but in some tests we want to overwrite some archives. For this we do "zip.writestr(archive_name, zip.read(archive_name) + new_content)". Something like import zipfile from StringIO import StringIO def Foo(): zfile = StringIO() zip = zipfile.ZipFile(zfile, 'a') zip.writestr( "foo", "foo content") zip.writestr( "bar", "bar content") zip.writestr( "foo", zip.read("foo") + "some more foo content") print zip.read("bar") Foo() The problem is that this works fine in Python 2.4 and 2.5, but not 2.6. In Python 2.6 this fails on the print line with "BadZipfile: File name in directory "bar" and header "foo" differ." It seems that it is reading the correct file bar, but that it thinks it should be reading foo instead. I'm at a loss. What am I doing wrong? Is this not supported? I tried searching the web but could find no mention of similar problems. I read the zipfile documentation, but could not find anything (that I thought was) relevant, especially since I'm calling read() with the filename string. Any ideas? Thank you in advance!

  Read the article

• Should .net comments start with a capital letter and end with a period?

  - by Hamish Grubijan

  Depending on the feedback I get, I might raise this "standard" with my colleagues. This might become a custom StyleCop rule. is there one written already? So, Stylecop already dictates this for summary, param, and return documentation tags. Do you think it makes sense to demand the same from comments? On related note: if a comment is already long, then should it be written as a proper sentence? For example (perhaps I tried too hard to illustrate a bad comment): //if exception quit vs. // If an exception occurred, then quit. If figured - most of the time, if one bothers to write a comment, then it might as well be informative. Consider these two samples: //if exception quit if (exc != null) { Application.Exit(-1); } and // If an exception occurred, then quit. if (exc != null) { Application.Exit(-1); } Arguably, one does not need a comment at all, but since one is provided, I would think that the second one is better. Please back up your opinion. Do you have a good reference for the art of commenting, particularly if it relates to .Net? Thanks.

  Read the article

• Perl help dereferencing a reference to an array of hash references, containing record set data

  - by user1724150

  I'm using the a Amazon Perl module that returns a reference to an array of hash references as $record_sets, containing record set data and I'm having a hard time dereferencing it. I can print the data using data dumper but I need to be able to manipulate the data. Below is the documentation provided for the module Thanks In Advance: #list_resource_record_sets #Lists resource record sets for a hosted zone. #Called in scalar context: $record_sets = $r53->list_resource_record_sets(zone_id => '123ZONEID'); #Returns: A reference to an array of hash references, containing record set data. Example: $record_sets = [ { name => 'example.com.', type => 'MX' ttl => 86400, records => [ '10 mail.example.com' ] }, { name => 'example.com.', type => 'NS', ttl => 172800, records => [ 'ns-001.awsdns-01.net.', 'ns-002.awsdns-02.net.', 'ns-003.awsdns-03.net.', 'ns-004.awsdns-04.net.' ]

  Read the article

• mutableCopyWithZone updating a property value.

  - by Jim

  I have a Class that I need to copy with the ability to make changes the value of a variable on both Classes. Simply put the classes need to remain clones of each other at all times. My understanding of the documentation is that I can do this using a shallow copy of the Class which has also been declared mutable. By shallow copying the pointer value for the variable will be cloned so that it is an exact match in both classes. So when I update the variable in the original the copy will be updated simultaneously. Is this right? As you can see below I have used mutableCopyWithZone in the class I want to copy. I have tried both NSCopyObject and allocWithZone methods to get this to work. Although I'm able to copy the class and it appears as intended, when updating the variable it is not changing value in the copied Class. - (id)mutableCopyWithZone:(NSZone *)zone { //ReviewViewer *copy = NSCopyObject(self, 0, zone); ReviewViewer *copy = [[[self class] allocWithZone:zone] init]; copy->infoTextViews = [infoTextViews copy]; return copy; } infoTextViews is a property declared as nonatomic, retain in the header file of the class being copied. I have also implemented the NSMutableCopying protocol accordingly. Any help would be great.

  Read the article

• Should I still be using jquery .getJson in 1.4.2?

  - by chobo2

  Hi I was looking at the 14 days of jquery http://jquery14.com/day-01/jquery-14 and I saw this and it got me to wondering is there a point to use getJson anymore? JSON and script types auto-detected by content-type (jQuery.ajax Documentation, Commit 1, Commit 2) If the response to an Ajax request is returned with a JSON mime type (application/json), the dataType defaults to “json” (if no dataType is specified). Additionally, if the response to an Ajax request is returned with a JavaScript mime type (text/javascript or application/x-javascript) , the dataType defaults to “script” (if no dataType is specified), causing the script to automatically execute. First I can see such a huge benefit of this. In jquery 1.3 I came to a situation where in some cases I would return a partial view and some cases I would return a json result (asp.net mvc). It worked in firefox but in no other browser and one of the problems was I basically had to tell jquery to either do json or text/html. With it automatically detecting I could get away with this. Anyways I found a solution around this at that time. So now it just makes me wonder if there is any point to using GetJson. I am also unsure how to set these JavaScript mime types? I am assuming that if you return a JsonResult from asp.net mvc it will set it. but I am not sure if I was just sending a text result if it would be set( I am not sure if ContentResult would set this).

  Read the article

• Why doesn't g++ pay attention to __attribute__((pure)) for virtual functions?

  - by jchl

  According to the GCC documentation, __attribute__((pure)) tells the compiler that a function has no side-effects, and so it can be subject to common subexpression elimination. This attribute appears to work for non-virtual functions, but not for virtual functions. For example, consider the following code: extern void f( int ); class C { public: int a1(); int a2() __attribute__((pure)); virtual int b1(); virtual int b2() __attribute__((pure)); }; void test_a1( C *c ) { if( c->a1() ) { f( c->a1() ); } } void test_a2( C *c ) { if( c->a2() ) { f( c->a2() ); } } void test_b1( C *c ) { if( c->b1() ) { f( c->b1() ); } } void test_b2( C *c ) { if( c->b2() ) { f( c->b2() ); } } When compiled with optimization enabled (either -O2 or -Os), test_a2() only calls C::a2() once, but test_b2() calls b2() twice. Is there a reason for this? Is it because, even though the implementation in class C is pure, g++ can't assume that the implementation in every subclass will also be pure? If so, is there a way to tell g++ that this virtual function and every subclass's implementation will be pure?

  Read the article

• Celery Received unregistered task of type (run example)

  - by Echeg

  I'm trying to run example from Celery documentation. I run: celeryd --loglevel=INFO /usr/local/lib/python2.7/dist-packages/celery/loaders/default.py:64: NotConfigured: No 'celeryconfig' module found! Please make sure it exists and is available to Python. "is available to Python." % (configname, ))) [2012-03-19 04:26:34,899: WARNING/MainProcess] -------------- celery@ubuntu v2.5.1 ---- **** ----- --- * *** * -- [Configuration] -- * - **** --- . broker: amqp://guest@localhost:5672// - ** ---------- . loader: celery.loaders.default.Loader - ** ---------- . logfile: [stderr]@INFO - ** ---------- . concurrency: 4 - ** ---------- . events: OFF - *** --- * --- . beat: OFF -- ******* ---- --- ***** ----- [Queues] -------------- . celery: exchange:celery (direct) binding:celery tasks.py: # -*- coding: utf-8 -*- from celery.task import task @task def add(x, y): return x + y run_task.py: # -*- coding: utf-8 -*- from tasks import add result = add.delay(4, 4) print (result) print (result.ready()) print (result.get()) In same folder celeryconfig.py: CELERY_IMPORTS = ("tasks", ) CELERY_RESULT_BACKEND = "amqp" BROKER_URL = "amqp://guest:guest@localhost:5672//" CELERY_TASK_RESULT_EXPIRES = 300 When I run "run_task.py": on python console eb503f77-b5fc-44e2-ac0b-91ce6ddbf153 False errors on celeryd server [2012-03-19 04:34:14,913: ERROR/MainProcess] Received unregistered task of type 'tasks.add'. The message has been ignored and discarded. Did you remember to import the module containing this task? Or maybe you are using relative imports? Please see http://bit.ly/gLye1c for more information. The full contents of the message body was: {'retries': 0, 'task': 'tasks.add', 'utc': False, 'args': (4, 4), 'expires': None, 'eta': None, 'kwargs': {}, 'id': '841bc21f-8124-436b-92f1-e3b62cafdfe7'} Traceback (most recent call last): File "/usr/local/lib/python2.7/dist-packages/celery/worker/consumer.py", line 444, in receive_message self.strategies[name](message, body, message.ack_log_error) KeyError: 'tasks.add' Please explain what's the problem.

  Read the article

• Which Android hardware devices should I test on? [closed]

  - by Tchami

  Possible Duplicate: What hardware devices do you test your Android apps on? I'm trying to compile a list of Android hardware devices that it would make sense to buy and test against if you want to target an as broad audience as possible, while still not buying every single Android device out there. I know there's a lot of information regarding screen sizes and Android versions available elsewhere, but: when developing for Android it's not terribly useful to know if the screen size of a device is 480x800 or 320x240, unless you feel like doing the math to convert that into Android "units" (i.e. small, normal, large or xlarge screens, and ldpi, mdpi, hdpi or xhdpi densities). Even knowing the dimensions of a device, you cannot be sure of the actual Android units as there's some overlap, see Range of screens supported in the Android documentation Taking into account the distribution of Platform versions and Screen Sizes and Densities, below is my current list based on information from the Wikipedia article on Comparison of Android devices. I'm fairly sure the information in this list is correct, but I'd welcome any suggestions/changes. Phones | Model | Android Version | Screen Size | Density | | HTC Wildfire | 2.1/2.2 | Normal | mdpi | | HTC Tattoo | 1.6 | Normal | mdpi | | HTC Hero | 2.1 | Normal | mdpi | | HTC Legend | 2.1 | Normal | mdpi | | Sony Ericsson Xperia X8 | 1.6/2.1 | Normal | mdpi | | Motorola Droid | 2.0-2.2 | Normal | hdpi | | Samsung Galaxy S II | 2.3 | Normal | hdpi | | Samsung Galaxy Nexus | 4.0 | Normal | xhdpi | | Samsung Galaxy S III | 4.0 | Normal | xhdpi | **Tablets** | Model | Android Version | Screen Size | Density | | Samsung Galaxy Tab 7" | 2.2 | Large | hdpi | | Samsung Galaxy Tab 10" | 3.0 | X-Large | mdpi | | Asus Transformer Prime | 4.0 | X-Large | mdpi | | Motorola Xoom | 3.1/4.0 | X-Large | mdpi | N.B.: I have seen (and read) other posts on SO on this subject, e.g. Which Android devices should I test against? and What hardware devices do you test your Android apps on? but they don't seem very canonical. Maybe this should be marked community wiki?

  Read the article

• Does ReleaseStringUTF do more than free memory?

  - by Bayou Bob

  Consider the following C code segments. Segment 1: char * getSomeString(JNIEnv *env, jstring jstr) { char * retString; retString = (*env)->GetStringUTFChars(env, jstr, NULL); return retString; } void useSomeString(JNIEnv *env, jobject jobj, char *mName) { jclass cl = (*env)->GetObjectClass(env, jobj); jmethodId mId = (*env)->GetMethodID(env, cl, mName, "()Ljava/lang/String;"); jstring jstr = (*env)->CallObjectMethod(env, obj, id, NULL); char * myString = getSomeString(env, jstr); /* ... use myString without modifing it */ free(myString); } Because myString is freed in useSomeString, I do not think I am creating a memory leak; however, I am not sure. The JNI spec specifically requires the use of ReleaseStringUTFChars. Since I am getting a C style 'char *' pointer from GetStringUTFChars, I believe the memory reference exists on the C stack and not in the JAVA heap so it is not in danger of being Garbage Collected; however, I am not sure. I know that changing getSomeString as follows would be safer (and probably preferable). Segment 2: char * getSomeString(JNIEnv *env, jstring jstr) { char * retString; char * intermedString; intermedString = (*env)->GetStringUTFChars(env, jstr, NULL); retString = strdup(intermedString); (*env)->ReleaseStringUTFChars(env, jstr, intermedString); return retString; } Because of our 'process' I need to build an argument on why getSomeString in Segment 2 is preferable to Segment 1. Is anyone aware of any documentation or references which detail the behavior of GetStringUTFChars and ReleaseStringUTFChars in relation to where memory is allocated or what (if any) additional bookkeeping is done (i.e. local Reference Pointer to the Java Heap being created, etc). What are the specific consequences of ignoring that bookkeeping. Thanks in advance.

  Read the article

• How can I get the search parameters from jqgrid in the server side?

  - by Jack

  I've been visiting this forum a lot without registering since several months ago, and I really like it. So, thanks in advance to all the members. Now I'd like to make my first question. I've been using Jqgrid for a few time, and I've managed to have it display the rows and buttons, but now I need to do a search, a complex one, and I thought that "automatically" jqgrid would send the parameters to the server, I mean: sField, searchField, sOper, searchOper, sValue, searchString, sFilter and/or filters I'm not sure at all which ones it has to send, and I thought it would be just the same as it sends 'page', 'rows' and 'sord'. But I'm missing something, because, for example, I can get 'page', 'rows' and 'sord' using: $limit = $this->getRequest()->getParam('rows', 10); but I get nothing by using: $params = $_REQUEST['filters'] or $params = $this->getRequest()->getParam('sFilter'); I'm using PHP, Zend and json. I didn't post any code because my doubt is kind of generic, but I will do it if it was needed. I've searched a lot, and read the documentation, but I just don't see it. I will appreciate your help, thanks!

  Read the article

< Previous Page | 292 293 294 295 296 297 298 299 300 301 302 303  | Next Page >