Search Results

Search found 33971 results on 1359 pages for 'ask and learn'.

Page 297/1359 | < Previous Page | 293 294 295 296 297 298 299 300 301 302 303 304  | Next Page >

• 12.04 Dual Monitor Configuration changes to "Mirrored" automatically

  - by Josef

  After installing 12.04 on my Samsung X120 Notebook (with Intel GMA 4500 internal graphics card) i have a Problem with the configuration off my 2nd monitor. Its a 22" with 1680 * 1050 Pixel connected via HDMI. I use the display configuration and set internal display=off and external display=main display. That works fine. After rebooting i still have that configuration, but after a while (often when i press a button on the keyboard), the configuration automatically changes to "Mirror Screen" and the internal display switches on. Both displays then have a bad resolution. When i do the manual display configuration again, everything is fine for the duration of that session. What could be the problem, that this display configuration gets lost / resets?

  Read the article

• 2 windows loaders after grub2 repair

  - by adi

  I have recently reinstalled w7 and had ubuntu 12.04 lts installed on it,w7 installation deleted the grub2 loader,after that i found solution to use boot-repair from live-cd session, BUT......now i have 2 windows 7(loader)in grub loader,and only 1 windows 7 installation,how can i remove it?One is on on /dev/sda1(which should be w7 sistem reserved partition) and second is on on /dev/sda2(which is w7 installment partition) it says and both log on same w7.All i need is to remove it without brake the grub2 again and if someone is willing to guide me to add windows on primary selection, cause my girlfriends doesnt get along with linux :D.

  Read the article

• Wifi not working for Ubuntu 14.04

  - by user286975

  I have installed the Ubuntu 14.04 on Dell Vostro 2520 laptop. Wifi is not working after installation. Tried several methods to install but nothing happens. Vostro-2520:~$ sudo rfkill list all 0: hci0: Bluetooth Soft blocked: no Hard blocked: no Vostro-2520:~$ iwconfig usb0 no wireless extensions. eth0 no wireless extensions. lo no wireless extensions. The hardware is Broadcom 802.11 bcm43142. Please help to solve this issue.

  Read the article

• How can I set access to mounted TrueCrypt volumes, and how can I dismount them on logout?

  - by d3vid

  I have TrueCrypt setup to mount volumes when I log into my work account. However, when I log out and log in to another account, those volumes are still mounted and available on the other account. How can I set access to those volumes? I don't want all users to be able to access them once they're mounted. (They mounted at /media/volumename - do I just set permissions on the folder "volumename" before mounting?) How can I tell TrueCrypt to dismount them when I log out?

  Read the article

• unable to upgrade to 12.10 beta 2 from 12.04 [closed]

  - by user85959

  Possible Duplicate: There's an issue with an Alpha/Beta Release of Ubuntu, what should I do? authenticate 'quantal.tar.gz' against 'quantal.tar.gz.gpg' exception from gpg: GnuPG exited non-zero, with code 2 Debug information: gpg: Signature made Fri 28 Sep 2012 03:55:55 AM IST using DSA key ID 437D05B5 gpg: /tmp/update-manager-bpIptI/trustdb.gpg: trustdb created gpg: Good signature from "Ubuntu Archive Automatic Signing Key " gpg: WARNING: This key is not certified with a trusted signature! gpg: There is no indication that the signature belongs to the owner. Primary key fingerprint: 6302 39CC 130E 1A7F D81A 27B1 4097 6EAF 437D 05B5 gpg: Signature made Fri 28 Sep 2012 03:55:55 AM IST using RSA key ID C0B21F32 gpg: Can't check signature: public key not found Traceback (most recent call last): File "/usr/lib/python2.7/dist-packages/UpdateManager/UpdateManager.py", line 1110, in on_button_dist_upgrade_clicked fetcher.run() File "/usr/lib/python2.7/dist-packages/UpdateManager/Core/DistUpgradeFetcherCore.py", line 253, in run _("Authenticating the upgrade failed. There may be a problem " File "/usr/lib/python2.7/dist-packages/UpdateManager/DistUpgradeFetcher.py", line 41, in error return error(self.window_main, summary, message) File "/usr/lib/python2.7/dist-packages/UpdateManager/Core/utils.py", line 384, in error d.window.set_functions(Gdk.FUNC_MOVE) RuntimeError: unable to get the value gpg: /tmp/tmplqoLDu/trustdb.gpg: trustdb created

  Read the article

• Ubuntu 14.04 Bluetooth Magic Mouse doesn't pair (No agent available)

  - by Rafael Xavier

  Mouse gets discovered. Although, it doesn't pair. /var/log/syslog: Apr 23 10:05:15 xavier bluetoothd[9873]: No agent available for request type 0 Apr 23 10:05:15 xavier bluetoothd[9873]: btd_event_request_pin: Operation not permitted Apr 23 10:05:15 xavier bluetoothd[9873]: Connection refused (111) It's worth saying that: Keyboard has paired and it's working just fine though; Mouse used to work just fine in Ubuntu 12.04, and 13, and it works when I reboot on Mac; This is the hci device. $ hcitool dev Devices: hci0 E0:F8:47:3A:3F:47 How to get it working?

  Read the article

• How can I make sound work without starting X?

  - by Magnus Hoff

  I have a headless machine connected to my sound system, and I am using it to run a music playing daemon that I control over the network. (Among other things) However, I can't seem to be able to have sound come out of my speakers without running X. I am running pulse audio in a system wide instance and my daemon is not running within X. Nevertheless, when my daemon is playing music without me hearing it, I can fix it by running startx in an unrelated session. After X starts, I can hear the sound. The sound disappears again if I kill the X server. Interestingly/annoyingly, the sound also stops after X has been running for a few minutes. This could possibly be because of a screen saver of some sort, but I haven't been able to verify or falsify this theory. So my current workaround is to ssh into the box whenever I want music and startx, and restart it every fifteen minutes or so. I'd like to do better. I have been able to verify the following: Adjustments in alsamixer have no effect on this problem. The relevant output channel is never muted In alsamixer, I can see no difference between when the sound is working and when it isn't Nothing is muted in pactl list There is no difference in the output from pactl list between before starting X and after it's started. (Except the identifier of the pactl instance connected to pulse, which is different each time you run pactl) The user running the music daemon is a member of the groups audio, pulse and pulse-access The music daemon program does not report any error messages and acts as if it is playing the music like it should Some form of dbus daemon is running. ps aux|grep dbus reports dbus-daemon --system --fork --activation=upstart before and after I have started X Some details about my hardware: Motherboard: http://www.asus.com/Motherboards/AT5IONTI_DELUXE/ Sound chip: Nvidia GPU 0b HDMI/DP (from alsamixer) Using HDMI for output (Machine also has an Intel Realtek ALC887 that I am not using) Output of lsmod: Module Size Used by deflate 12617 0 zlib_deflate 27139 1 deflate ctr 13201 0 twofish_generic 16635 0 twofish_x86_64_3way 25287 0 twofish_x86_64 12907 1 twofish_x86_64_3way twofish_common 20919 3 twofish_generic,twofish_x86_64_3way,twofish_x86_64 camellia 29348 0 serpent 29125 0 blowfish_generic 12530 0 blowfish_x86_64 21466 0 blowfish_common 16739 2 blowfish_generic,blowfish_x86_64 cast5 25112 0 des_generic 21415 0 xcbc 12815 0 rmd160 16744 0 bnep 18281 2 rfcomm 47604 12 sha512_generic 12796 0 crypto_null 12918 0 parport_pc 32866 0 af_key 36389 0 ppdev 17113 0 binfmt_misc 17540 1 nfsd 281980 2 ext2 73795 1 nfs 436929 1 lockd 90326 2 nfsd,nfs fscache 61529 1 nfs auth_rpcgss 53380 2 nfsd,nfs nfs_acl 12883 2 nfsd,nfs sunrpc 255224 16 nfsd,nfs,lockd,auth_rpcgss,nfs_acl btusb 18332 2 vesafb 13844 2 pl2303 17957 1 ath3k 12961 0 bluetooth 180153 24 bnep,rfcomm,btusb,ath3k snd_hda_codec_hdmi 32474 4 nvidia 11308613 0 ftdi_sio 40679 1 usbserial 47113 6 pl2303,ftdi_sio psmouse 97485 0 snd_hda_codec_realtek 224173 1 snd_hda_intel 33719 5 snd_hda_codec 127706 3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel serio_raw 13211 0 snd_seq_midi 13324 0 snd_hwdep 17764 1 snd_hda_codec snd_pcm 97275 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec snd_rawmidi 30748 1 snd_seq_midi snd_seq_midi_event 14899 1 snd_seq_midi snd_seq 61929 2 snd_seq_midi,snd_seq_midi_event snd_timer 29990 2 snd_pcm,snd_seq snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq snd 79041 20 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device asus_atk0110 18078 0 mac_hid 13253 0 jc42 13948 0 soundcore 15091 1 snd snd_page_alloc 18529 2 snd_hda_intel,snd_pcm coretemp 13554 0 i2c_i801 17570 0 lp 17799 0 parport 46562 3 parport_pc,ppdev,lp r8169 62154 0 Any ideas? What does X do that's so important?

  Read the article

• I have permanent connections to Canonical servers, what are they for and how can I turn them off?

  - by Dan Dman

  After the recent upgrade to 12, I notice permanent connections to canonical servers. Running netstat -tp gives: Foreign Address State PID/Program name mulberry.canonical:http CLOSE_WAIT 6537/ubuntu-geoip-p alkes.canonical.co:http CLOSE_WAIT 6667/python alkes.canonical.co:http CLOSE_WAIT 6667/python Why are there permanent connections and how could I stop this behavior? And if this is intentional, who is responsible? I would like to understand why this was done because to me it seems like a bad idea.

  Read the article

• HDMI video output not working for external monitor

  - by user291852

  I have installed from scratch ubuntu GNOME 14.04 with gnome-flashback on my old HP HDX 16 laptop (core 2 duo p8600 + nvidia GT9600M + 4GB of ram) and I have problems with the HDMI output (I use it to extend my desktop on a dell U2412M 1920x1200 monitor). In the following I summarize the configurations that I have tried: Using the open source nouveau drivers, only the laptop monitor works, no signal from the external monitor connected to the HDMI output. However, the output of the xrandr command show that the HDMI output is connected with the correct resolution 1920x1200 (I find this thing really weird). Nouveau drivers with VGA connection works without problems on the external monitor, but the image is blurry compared to the HDMI connection. Using the nvidia drivers (I have tried different versions: nvidia-331-updates and the xorg-edgers versions nvidia-334 and nvidia-337) the HDMI output works, but I have system instabilities, random crashes and display freezes. I can't even enter in terminal mode with ctrl-alt-f1, so I have to manually shut down the laptop with the power button. I really would like to use the HDMI output with the nouveau drivers to avoid the system instabilities that I experienced with the nvidia drivers, but I can't figure out how to make it works. Alessandro

  Read the article

• Can't get Wireless RT2x00usb driver to work, and can't blacklist it

  - by TheLQ

  After a two year hiatus to Linux, I try it again out again. And then I run into to driver issues... I have an old Linksys WUSB54G v4 Wireless USB Adapter. In previous versions I had to use a combination of Ndiswrapper and Wicd to hope of getting it working. In 10.10, apparently there are built in drivers for it. Unfortunately they don't work. Fails to connect to my WPA network, fails to connect to my open unencrypted network. Wicd fails at "Obtaining IP address" or when using static IPs fails at verifying connectivity to network. Getting fed up I tried the ndiswrapper approach. Installed and configured, but still not working, even when blacklisting the rt2570 module. So for some debugging I added some lines to my /etc/modprobe.d/blacklist.conf file blacklist rt2570 blacklist prism54usb blacklist rt2x00lib blacklist rt2x00usb Restart and find this: lordquackstar@quackbeast:/etc/modprobe.d$ lsmod | grep rt2 rt2500usb 18049 0 rt2x00usb 9779 1 rt2500usb rt2x00lib 27275 2 rt2500usb,rt2x00usb led_class 2633 1 rt2x00lib mac80211 231541 2 rt2x00usb,rt2x00lib cfg80211 144470 2 rt2x00lib,mac80211 Seems to be ignored... Tried this: lordquackstar@quackbeast:/etc/modprobe.d$ sudo rmmod -f rt2x00usb ERROR: Removing 'rt2x00usb': Resource temporarily unavailable lordquackstar@quackbeast:/etc/modprobe.d$ sudo rmmod -f rt2x00lib ERROR: Removing 'rt2x00lib': Resource temporarily unavailable and couldn't connect. Restarted and was back to the same modules loading. Maybe there's something in the log: lordquackstar@quackbeast:/etc/modprobe.d$ tail -n100000 /var/log/syslog | grep rt2 Dec 13 19:01:15 quackbeast kernel: [ 23.698056] Registered led device: rt2500usb-phy0::radio Dec 13 19:01:15 quackbeast kernel: [ 23.698140] Registered led device: rt2500usb-phy0::quality Dec 13 19:01:15 quackbeast kernel: [ 23.701680] usbcore: registered new interface driver rt2500usb Dec 13 19:01:15 quackbeast NetworkManager[855]: <info> (wlan0): new 802.11 WiFi device (driver: 'rt2500usb' ifindex: 4) Dec 13 19:17:47 quackbeast kernel: [ 23.521759] Registered led device: rt2500usb-phy0::radio Dec 13 19:17:47 quackbeast kernel: [ 23.521824] Registered led device: rt2500usb-phy0::quality Dec 13 19:17:47 quackbeast kernel: [ 23.524740] usbcore: registered new interface driver rt2500usb Dec 13 19:17:47 quackbeast NetworkManager[798]: <info> (wlan0): new 802.11 WiFi device (driver: 'rt2500usb' ifindex: 4) Seems to be autoloading. So this means that even if I pull it out, remove the module, and get it working, it still won't work when its plugged in all the time. More info: lordquackstar@quackbeast:/etc/modprobe.d$ sudo lshw -C Network *SNIP* *-network description: Wireless interface physical id: 1 bus info: usb@1:2 logical name: wlan0 serial: 00:12:17:9b:f3:1e capabilities: ethernet physical wireless configuration: broadcast=yes driver=rt2500usb driverversion=2.6.35-24-generic firmware=N/A link=no multicast=yes wireless=IEEE 802.11bg USB: lordquackstar@quackbeast:/etc/modprobe.d$ lsusb | grep -i rt Bus 001 Device 003: ID 13b1:000d Linksys WUSB54G v4 802.11g Adapter [Ralink RT2500USB] Any suggestions on how to either fix the rt2x00usb driver or permanently block it from loading? Note that I already have ndiswrapper installed

  Read the article

• How to mount NAS folders via direct wired connection?

  - by Pavel Vlasov

  There are two machines connected to each other via network cable. One is notebook Ubuntu 12.04. Another is NAS Western Digital with a Debian. The NAS has some files shared via samba. I am not sure how it is called but under Windows these files are accessible via path \mybooklive\public. I know there is NFS - probably it is preferable over samba... So, how to get my files accessible from Ubuntu when a cable is plugged?

  Read the article

• Wubi 12.04 installation error executing command command

  - by Erik Lau

  I have tried to install wubi but have not had luck because there is an error executing command: command=C:\Users\Me\AppData\Local\Temp\pyl4266.tmp\bin\resize2fs.exe-f C:\ubuntu\disks\root.disk 17744M retval=1 stderr= stdout=resize2fs1.40.6 (09-Feb-2008) Usage: /cygdrive/c/Users/Eriks/AppData/Local/Temp/pyl4266.tmp/bin/resize2fs.exe-f C:/unbuntu/disks.root.disk17744M [-d debug_flags][-f][-F][-p] device[new_size] I do not understand what is the problem. Here is my log file. https://skydrive.live.com/redir?resid=B4F19CA027FFAD89!324 Please let me know what can be done to fix this error.

  Read the article

• My files disappeared from the UbuntuOne synced folder

  - by Junji

  I set up an UbuntuOne account on PC1 (Ubuntu 10.10) and the same account on PC2 (Ubuntu 10.04). I did the following: Created file named maverick.txt in PC1's ~/Ubuntu One/log Created file named venus.txt in PC2's ~/Ubuntu One/log Bot files appeared in one.ubuntu.com A few hours later, those two files are disappeared from PC1's Ubuntu One/log PC2's Ubuntu One/log one.ubuntu.com So, my files are gone forever. Why did this happen? Is there any way to recover those files?

  Read the article

• How to grep the output of youtube-dl?

  - by mohtaw

  The normal output for youtube-dl is the following [download] Downloading video #3 of 33 [youtube] WbWb0u8bJrU: Downloading webpage [youtube] WbWb0u8bJrU: Downloading video info webpage [youtube] WbWb0u8bJrU: Extracting video information [download] Resuming download at byte 107919109 [download] Destination: Lec 6.mp4 [download] 86.2% of 137.18MiB at 48.80KiB/s ETA 06:37 I need to show the first and last monitor the downloading I use the command youtube-dl -cit -f 18 URL | grep -e ETA -e "Downloading video #" It's not working only the first line is working while the last line is not, and I see the download is running as the file size grows

  Read the article

• Mount an image created from ddrescue

  - by oshirowanen

  I know this question has been asked before, but following those answers does not seem to work for me. I have created an image of a USB stick this is on my laptop harddrive. How do I mount this image? The command I used to create the image was: ddrescue --no-split /dev/sdb usb_recovered usb_recovery_log What am I supposed to do next? Mount it? Fix it then mount it? Mount it then fix it? And how? UPDATE: What I want to recover are the files in the image. How? I don't know as I have tried testdisk and it can't find partitions, and I have tried fdisk and it can't find a partition table in the image either.

  Read the article

• Why am I getting a "network is unreachable" error on Ubuntu Server?

  - by jason328

  I'm a completely new to Ubuntu server and am having a hard time connecting the server to the internet. I first ran ping -n 8.8.8.8 connect:Network is unreachable Then I ran ifconfig Link encap:Local Loopback inet addr:127.0.0.1 Mask 255.0.0.0 inet6 addr: ::1/28Scope:host UP LOOPBACK RUNNING MTU:16436 RX packets:192 errors:0 dropped:0 overruns:0 frame:0 TX packets:192 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:15360 (15.2KB) TX bytes:15360 (15.3KB) Here is ouput for sudo lspci -n 00:00.0 0600: 8086:2580 (rev 04) 00:02.0 0300: 8086:2582 (rev 04) 00:1d.0 0c03: 8086:2658 (rev 03) 00:1d.1 0c03: 8086:2659 (rev 03) 00:1d.0 0c03: 8086:265a (rev 03) 00:1d.0 0c03: 8086:265b (rev 03) 00:1d.0 0c03: 8086:265c (rev 03) 00:1e.0 0604: 8086:244e (rev d3) 00:1e.0 0401: 8086:266e (rev 03) 00:1f.0 0601: 8086:2640 (rev 03) 00:1f.0 0101: 8086:2651 (rev 03) 00:1f.0 0c05: 8086:266a (rev 03) 00:0b.0 0200: 8086:1654 (rev 03) lshw-c network returns WARNING: you should run this program as super-user. *-network DISABLED description:Ethernet interface product: NetXtreme BCM5705_2 Gigabit Ethernet vender: Broadcom Corporation physical id:b bus info:pci@0000:0a:0b.0 logical name: eth0 capabilities: bus_master_cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion= 3.121 firmware=5705-v3.18 latency=32 mingnt=64 multicast=yes port=twister pair lsmod code returned this Module Size Used By e100 37213 0 dm_crypt 23125 1 ppdev 17113 0 psmouse 87603 0 snd_intel8x0 38570 0 snd_ac97_codec 134826 1 snd_intel8x0 ac97_bus 12730 1 snd_ac97_codec snd_pcm 97188 2 snd_intel8x0, snd_ac97_codec serio_raw 13211 0 snd_timer 29990 1 snd_pcm snd 78855 4 snd_intel8x0, snd_ac97_codec, snd_pcm,snd_timer soundcore 15091 1 snd snd_page_alloc 18529 2 snd_intel8x0, snd_pcm ext2 73795 1 parport_pc 32866 1 mac_hid 13253 0 lp 17799 0 parport 46562 3 ppdev, parport_pc,lp usbhid 47199 0 hid 99559 1 usbhid tg3 152032 0 i915 468651 1 floppy 70365 0 drm_kms_helper 46978 1 i915 drm 242038 2 i915,drm_kms_helper i2c_algo_bit 13423 1 i915 video 19596 1 i915 Again there is more but it's giving info on the driver itself. I know it works, I've used it. I assume then that my network got disabled when I installed Ubuntu Server. How do I enable it? I checked and the internet cable is connected to the D-link router. I have also used this same computer for internet access when I had Ubuntu Desktop installed so internet does work.

  Read the article

• Turn off laptop display and have monitor

  - by Ryan B

  My laptop display has stopped working and is unfixable! Anyway, I got a full HD monitor and plugged that into the HDMI port of the laptop. I have changed the power settings so that I can close the lid and still have the monitor on, and this all works. However because it is on "mirror displays", I cannot get the full 1080p resolution that the monitor supports, and when I turn off mirror displays and switch off the laptop screen, the monitor will also switch off! I'm really stuck, as I can only get the monitor to display its full resolution if I have it with the laptop screen turned on, and I dont want this because (as the laptop display does not work) things get lost on that side of the screen. HELP. (Dell Studio 1537 Monitor is Samsung SA300 Connected through HDMI Ubuntu 11.10)

  Read the article

• Broken keyboard shortcuts

  - by c089

  When I freshly installed maverick on my new notebook, I set up my keyboard shortcuts like this: Switch to WS 1 = Mod4+1, Move Window to WS 1 = Mod4+Shift+1, Switch to WS 2 = Mod4+2 and so on (Mod4 being the "Windows" key). But now the three-key combinations (i.e. the ones I use for "move to...") stopped working. When I go to keyboard preferences, I still see them and I can even change them to a different combination and then again to the desired one - but they won't execute the window movement afterwards :/ Any suggestions how to fix this?

  Read the article

• Ubuntu 12.04 can't detect internal mobile broadband (Gobi 2000)

  - by Anega

  Hi I have been trying Ubuntu to detect and connect using the buit in mobile broadband capability in my HP 110 netbook but until now nothing seems to work Output of lspci command: 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02) 00:1f.2 SATA controller: Intel Corporation 82801GBM/GHM (ICH7-M Family) SATA Controller [AHCI mode] (rev 02) 01:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01) 02:00.0 Ethernet controller: Atheros Communications Inc. AR8132 Fast Ethernet (rev c0) Output of lsusb command: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 1fea:0008 Bus 005 Device 002: ID 03f0:2a1d Hewlett-Packard Bus 001 Device 005: ID 03f0:241d Hewlett-Packard Gobi 2000 Wireless Modem (QDL mode) So far I have been trying what is intended on several pages, trying to update firmware using wine and then moving .mda or whatever files the update package GobiInstaller.mdi throws out. The results are always the same: After running Output of wine msiexec /a GobiInstaller.msi /qb TARGETDIR="c:\temp" fixme:advapi:GetCurrentHwProfileA (0x33fba8) semi-stub fixme:heap:HeapSetInformation (nil) 1 (nil) 0 fixme:win:RegisterDeviceNotificationA (hwnd=0x13e250, filter=0xf7e984,flags=0x00000001) returns a fake device notification handle! fixme:heap:HeapSetInformation (nil) 1 (nil) 0 fixme:heap:HeapSetInformation (nil) 1 (nil) 0 fixme:advapi:RegisterEventSourceW ((null),L"Bonjour Service"): stub fixme:advapi:ReportEventA (0xcafe4242,0x0004,0x0000,0x00000064, (nil),0x0001,0x00000000,0x79e58c,(nil)): stub fixme:advapi:ReportEventW (0xcafe4242,0x0004,0x0000,0x00000064, (nil),0x0001,0x00000000,0x12e6d0,(nil)): stub fixme:winsock:WSAIoctl WS_SIO_UDP_CONNRESET stub fixme:winsock:WSAIoctl -> SIO_ADDRESS_LIST_CHANGE request: stub fixme:iphlpapi:DeleteIpForwardEntry (pRoute 0x79e920): stub fixme:iphlpapi:CreateIpForwardEntry (pRoute 0x79e958): stub fixme:advapi:ReportEventA (0xcafe4242,0x0004,0x0000,0x00000064, (nil),0x0001,0x00000000,0x79e58c,(nil)): stub fixme:advapi:ReportEventW (0xcafe4242,0x0004,0x0000,0x00000064, (nil),0x0001,0x00000000,0x12e6d0,(nil)): stub fixme:service:EnumServicesStatusW resume handle not supported fixme:service:EnumServicesStatusW resume handle not supported fixme:advapi:ReportEventA (0xcafe4242,0x0004,0x0000,0x00000064,(nil),0x0001,0x00000000,0x79e58c,(nil)): stub fixme:advapi:ReportEventW (0xcafe4242,0x0004,0x0000,0x00000064, (nil),0x0001,0x00000000,0x12e6d0,(nil)): stub fixme:netapi32:NetGetJoinInformation Semi-stub (null) 0x79e644 0x79e63c fixme:winsock:WSAIoctl WS_SIO_UDP_CONNRESET stub fixme:storage:create_storagefile Storage share mode not implemented. err:msi:ITERATE_Actions Execution halted, action L"_693CD41C_A4A2_4FA1_8888_FC56C9E6E13B" returned 1603 err:rpc:I_RpcGetBuffer no binding err:rpc:I_RpcGetBuffer no binding andres@andres-HP-Mini-110-1100:~/.wine/drive_c/Qualcomm$ fixme:advapi:ReportEventA (0xcafe4242,0x0004,0x0000,0x00000064,(nil),0x0001,0x00000000,0x79e588,(nil)): stub fixme:advapi:ReportEventW (0xcafe4242,0x0004,0x0000,0x00000064, (nil),0x0001,0x00000000,0x12e6d0,(nil)): stub And creates 2 empty folders, I have been trying hard and I am not sure if I am doing it the way it should be. Thanks

  Read the article

• Cannot ping router with a static IP assigned?

  - by Uriah

  Alright. I am running Ubuntu LTS 12.04 and am trying to configure a local caching/master DNS server so I am using Bind9. First, here are some things via default DHCP: /etc/network/interfaces cat /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet dhcp # The primary network interface - STATIC #auto eth0 #iface eth0 inet static # address 192.168.2.113 # netmask 255.255.255.0 # network 192.168.2.0 # broadcast 192.168.2.255 # gateway 192.168.2.1 # dns-search uclemmer.net # dns-nameservers 192.168.2.113 8.8.8.8 /etc/resolv.conf cat /etc/resolv.conf # Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8) # DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN nameserver 192.168.2.1 search uclemmer.net ifconfig ifconfig eth0 Link encap:Ethernet HWaddr 00:14:2a:82:d4:9e inet addr:192.168.2.103 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::214:2aff:fe82:d49e/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1067 errors:0 dropped:0 overruns:0 frame:0 TX packets:2504 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:153833 (153.8 KB) TX bytes:214129 (214.1 KB) Interrupt:23 Base address:0x8800 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:915 errors:0 dropped:0 overruns:0 frame:0 TX packets:915 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:71643 (71.6 KB) TX bytes:71643 (71.6 KB) ping ping -c 4 192.168.2.1 PING 192.168.2.1 (192.168.2.1) 56(84) bytes of data. 64 bytes from 192.168.2.1: icmp_req=1 ttl=64 time=0.368 ms 64 bytes from 192.168.2.1: icmp_req=2 ttl=64 time=0.224 ms 64 bytes from 192.168.2.1: icmp_req=3 ttl=64 time=0.216 ms 64 bytes from 192.168.2.1: icmp_req=4 ttl=64 time=0.237 ms --- 192.168.2.1 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 2997ms rtt min/avg/max/mdev = 0.216/0.261/0.368/0.063 ms ping -c 4 google.com PING google.com (74.125.134.102) 56(84) bytes of data. 64 bytes from www.google-analytics.com (74.125.134.102): icmp_req=1 ttl=48 time=15.1 ms 64 bytes from www.google-analytics.com (74.125.134.102): icmp_req=2 ttl=48 time=11.4 ms 64 bytes from www.google-analytics.com (74.125.134.102): icmp_req=3 ttl=48 time=11.6 ms 64 bytes from www.google-analytics.com (74.125.134.102): icmp_req=4 ttl=48 time=11.5 ms --- google.com ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 3003ms rtt min/avg/max/mdev = 11.488/12.465/15.118/1.537 ms ip route ip route default via 192.168.2.1 dev eth0 metric 100 192.168.2.0/24 dev eth0 proto kernel scope link src 192.168.2.103 As you can see, with DHCP everything seems to work fine. Now, here are things with static IP: /etc/network/interfaces cat /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface #auto eth0 #iface eth0 inet dhcp # The primary network interface - STATIC auto eth0 iface eth0 inet static address 192.168.2.113 netmask 255.255.255.0 network 192.168.2.0 broadcast 192.168.2.255 gateway 192.168.2.1 dns-search uclemmer.net dns-nameservers 192.168.2.1 8.8.8.8 I have tried dns-nameservers in various combos of *.2.1, *.2.113, and other reliable, public nameservers. /etc/resolv.conf cat /etc/resolv.conf # Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8) # DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN nameserver 192.168.2.1 nameserver 8.8.8.8 search uclemmer.net Obviously, when I change the nameservers in the /etc/network/interfaces file, the nameservers change here too. ifconfig ifconfig eth0 Link encap:Ethernet HWaddr 00:14:2a:82:d4:9e inet addr:192.168.2.113 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::214:2aff:fe82:d49e/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1707 errors:0 dropped:0 overruns:0 frame:0 TX packets:2906 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:226230 (226.2 KB) TX bytes:263497 (263.4 KB) Interrupt:23 Base address:0x8800 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:985 errors:0 dropped:0 overruns:0 frame:0 TX packets:985 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:78625 (78.6 KB) TX bytes:78625 (78.6 KB) ping ping -c 4 192.168.2.1 PING 192.168.2.1 (192.168.2.1) 56(84) bytes of data. --- 192.168.2.1 ping statistics --- 4 packets transmitted, 0 received, 100% packet loss, time 3023ms ping -c 4 google.com ping: unknown host google.com Lastly, here are my bind zone files: /etc/bind/named.conf.options cat /etc/bind/named.conf.options options { directory "/etc/bind"; // // // query-source address * port 53; notify-source * port 53; transfer-source * port 53; // If there is a firewall between you and nameservers you want // to talk to, you may need to fix the firewall to allow multiple // ports to talk. See http://www.kb.cert.org/vuls/id/800113 // If your ISP provided one or more IP addresses for stable // nameservers, you probably want to use them as forwarders. // Uncomment the following block, and insert the addresses replacing // the all-0's placeholder. // forwarders { // 0.0.0.0; // }; forwarders { // My local 192.168.2.113; // Comcast 75.75.75.75; 75.75.76.76; // Google 8.8.8.8; 8.8.4.4; // DNSAdvantage 156.154.70.1; 156.154.71.1; // OpenDNS 208.67.222.222; 208.67.220.220; // Norton 198.153.192.1; 198.153.194.1; // Verizon 4.2.2.1; 4.2.2.2; 4.2.2.3; 4.2.2.4; 4.2.2.5; 4.2.2.6; // Scrubit 67.138.54.100; 207.255.209.66; }; // // // //allow-query { localhost; 192.168.2.0/24; }; //allow-transfer { localhost; 192.168.2.113; }; //also-notify { 192.168.2.113; }; //allow-recursion { localhost; 192.168.2.0/24; }; //======================================================================== // If BIND logs error messages about the root key being expired, // you will need to update your keys. See https://www.isc.org/bind-keys //======================================================================== dnssec-validation auto; auth-nxdomain no; # conform to RFC1035 listen-on-v6 { any; }; }; /etc/bind/named.conf.local cat /etc/bind/named.conf.local // // Do any local configuration here // // Consider adding the 1918 zones here, if they are not used in your // organization //include "/etc/bind/zones.rfc1918"; zone "example.com" { type master; file "/etc/bind/zones/db.example.com"; }; zone "2.168.192.in-addr.arpa" { type master; file "/etc/bind/zones/db.2.168.192.in-addr.arpa"; /etc/bind/zones/db.example.com cat /etc/bind/zones/db.example.com ; ; BIND data file for example.com interface ; $TTL 604800 @ IN SOA yossarian.example.com. root.example.com. ( 1343171970 ; Serial 604800 ; Refresh 86400 ; Retry 2419200 ; Expire 604800 ) ; Negative Cache TTL ; @ IN NS yossarian.example.com. @ IN A 192.168.2.113 @ IN AAAA ::1 @ IN MX 10 yossarian.example.com. ; yossarian IN A 192.168.2.113 router IN A 192.168.2.1 printer IN A 192.168.2.200 ; ns01 IN CNAME yossarian.example.com. www IN CNAME yossarian.example.com. ftp IN CNAME yossarian.example.com. ldap IN CNAME yossarian.example.com. mail IN CNAME yossarian.example.com. /etc/bind/zones/db.2.168.192.in-addr.arpa cat /etc/bind/zones/db.2.168.192.in-addr.arpa ; ; BIND reverse data file for 2.168.192.in-addr interface ; $TTL 604800 @ IN SOA yossarian.example.com. root.example.com. ( 1343171970 ; Serial 604800 ; Refresh 86400 ; Retry 2419200 ; Expire 604800 ) ; Negative Cache TTL ; @ IN NS yossarian.example.com. @ IN A 255.255.255.0 ; 113 IN PTR yossarian.example.com. 1 IN PTR router.example.com. 200 IN PTR printer.example.com. ip route ip route default via 192.168.2.1 dev eth0 metric 100 192.168.2.0/24 dev eth0 proto kernel scope link src 192.168.2.113 I can SSH in to the machine locally at *.2.113 or at whatever address is dynamically assigned when in DHCP "mode". *2.113 is in my router's range and I have ports open and forwarding to the server. Pinging is enabled on the router too. I briefly had a static configuration working but it died after the first reboot. Please let me know what other info you might need. I am beyond frustrated/baffled.

  Read the article

• How can I get multitouch enabled on my Sentelic touchpad (msi x350 notebook)?

  - by Jon

  I understand my MSI x350 notebook comes with a Sentelic trackpad, which supports multi-touch (according to the MSI website). Is there a way to enable multitouch on Ubuntu? I've been having difficulty finding info about this on google, and since it's not a synaptics touchpad I haven't been able to find much info in ubuntu docs. My mouse preferences doesn't have a trackpad tab like it does on, say, a Macbook. Running "xinput list" returns: FSPPS/2 Sentelic FingerSensingPad id=11 And in my Xorg.0.log: [ 17.481] (II) config/udev: Adding input device FSPPS/2 Sentelic FingerSensingPad (/dev/input/event6) [ 17.481] () FSPPS/2 Sentelic FingerSensingPad: Applying InputClass "evdev pointer catchall" [ 17.481] () FSPPS/2 Sentelic FingerSensingPad: always reports core events [ 17.481] () FSPPS/2 Sentelic FingerSensingPad: Device: "/dev/input/event6" [ 17.500] (II) FSPPS/2 Sentelic FingerSensingPad: Found 11 mouse buttons [ 17.500] (II) FSPPS/2 Sentelic FingerSensingPad: Found scroll wheel(s) [ 17.500] (II) FSPPS/2 Sentelic FingerSensingPad: Found relative axes [ 17.500] (II) FSPPS/2 Sentelic FingerSensingPad: Found x and y relative axes [ 17.500] (II) FSPPS/2 Sentelic FingerSensingPad: Configuring as mouse [ 17.500] () FSPPS/2 Sentelic FingerSensingPad: YAxisMapping: buttons 4 and 5 [ 17.500] (**) FSPPS/2 Sentelic FingerSensingPad: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 17.500] (II) XINPUT: Adding extended input device "FSPPS/2 Sentelic FingerSensingPad" (type: MOUSE) [ 17.500] (II) FSPPS/2 Sentelic FingerSensingPad: initialized for relative axes. [ 17.500] (II) config/udev: Adding input device FSPPS/2 Sentelic FingerSensingPad (/dev/input/mouse0)

  Read the article

• What causes Nautilus to restart whenever I kill it?

  - by fred.bear

  In htop, I kill Nautilus, and within one second, it's back, with a new PID! The restarted Nautilus shows in the Processes list, but has no GUI until I manually launch Nautilus... I've heard mention of Nautilus works in lockstep with the desktop... maybe that is the reason(?). Is there some sort of "watchdog" program keeping an eye on some distro-critical programs? Monitoring Nautilus doesn't seem like a Linux kernel issue, so I just wonder what is happening here?

  Read the article

• Ubuntu GUI crash when LightDM enters, unable to login

  - by Cesar

  This issue happened spounteniously, i don´t know what could have cause it as i wasn´t using the PC when it happened. I ruled out any messing around with the setting as the user doesn´t know how to enter the BIOS, doesn´t have the sudo password and was only using firefox and libreoffice when it happened. After the plymouth sequence i get this error. https://www.dropbox.com/s/uf1xdkqkw9alvcu/IMAG0252.jpg And this option: https://www.dropbox.com/s/tpivkgjkx2spa3v/IMAG0253.jpg I follow each option and nothing happens after that. The issue persist after rebooting. I choose the other options to see if anything happens, i either get back to option 1 or doesn´t show anything anormal. (I have pictures i someone wants to know) What i found weird is that event though the error is possitioned in the chip, however ubuntu 10.04 and 12.04 run fine in a live CD I saw that some people are having issues when LightDM has a non default wallpaper, but i use a default one. Thanks in advance.

  Read the article

• The development version 11.04 will not install [closed]

  - by richzilla

  I'm having troubles installing Ubuntu's development version 11.04. I'm attempting to install it in a VM. When I try to install directly I get a warning saying a fatal error has occurred, and then it boots into a live desktop session. When I attempt to install here, the installer hangs after I've entered the username and password. Any ideas? I'm using VirtualBox OSE, I've given the VM 1 GB RAM, and a 50 GB HDD. I've included a screenshot of the error below:

  Read the article

• Ubuntu 11.10, FF 11, ATI Catalyst v12.2, Driver Package version 8.95, WebGL doesn't work

  - by Victor S

  I'm running Ubuntu 11.10, FF 11, ATI Catalyst v12.2, Driver Package version 8.95, WebGL doesn't work. This is a pretty capable setup and definetly did have FF work previously, Note: I've downloaded and installed the ATI drivers from AMD. Not sure how to get WebGL working. Updated My video card info: 01:00.0 VGA compatible controller: ATI Technologies Inc Cypress [Radeon HD 5800 Series] (prog-if 00 [VGA controller]) Subsystem: ATI Technologies Inc Device 0b00 Flags: bus master, fast devsel, latency 0, IRQ 44 Memory at d0000000 (64-bit, prefetchable) [size=256M] Memory at fbee0000 (64-bit, non-prefetchable) [size=128K] I/O ports at d000 [size=256] Expansion ROM at fbec0000 [disabled] [size=128K] Capabilities: [50] Power Management version 3 Capabilities: [58] Express Legacy Endpoint, MSI 00 Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?> Capabilities: [150] Advanced Error Reporting Kernel driver in use: fglrx_pci Kernel modules: fglrx, radeon

  Read the article

< Previous Page | 293 294 295 296 297 298 299 300 301 302 303 304  | Next Page >