Search Results

Search found 45193 results on 1808 pages for 'select call'.

Page 297/1808 | < Previous Page | 293 294 295 296 297 298 299 300 301 302 303 304  | Next Page >

• Installing a new ASP.NET 4.0 site on a Windows 2008 server.

  - by TATWORTH

  I have been specifically requested to blog about getting an ASP.NET 4.0 site working on a Windows 2008 server that has never run a 4.0 web site before. Make sure the 4.0 framework is installed on the server! Patch it will ALL the security patches have been applied. ((for a live server, make sure that you tested the patches on your development server first) You will find the HTTP Log status codes at http://support.microsoft.com/kb/943891 - they are very important in understandign the IIS logs) After installing, turn on 4.0, by doing the following: Start the Internet Information Services (IIS Manager) Select the server node in the connections pane. (this is the node above Application Pools, FTP Sites and Server Farms) Double click the ISAPI and CGI Restrictions item in the centre pane You should see 1 or 2 ASP.NET v4.0.30319 entries, select Enable in the Actions pane for all of them. ASP.NET 4.0 should now run! Remeber after creating your new 4.0 ASP.NET site. select the Sites node and find out the Id of it. By default, the IIS logs are at C:\inetpub\logs\LogFiles and if your site is say 21, then the logs will be created in the W3SVC21 sub-directory. The key point about using these logs is that in the event of an error when trying to start the site for the first time, the log will contain the status code and the sub-code. By having the full code and sub-code, set up issues can be resolved in minutes instead of hours.

  Read the article

• selecting files in windows-7 explorer just by hovering

  - by bortao

  One of the biggest annoyances for me of Windows 7 vs Windows XP is that you cant select files properly by hovering over them on Windows Explorer (or multi select by holding ctrl). When i hover an item it gets light blue, not selected. Only after a time or after more hovering, it gets selected. I set the delay (MouseHoverTime) to 1. Windows seems to avoid wrong selection by requiring an additional time or space of mouse hovering before actually selecting the item. I tried playing with the values MouseHoverHeight, MouseHoverWidth, MouseSensitivity, MouseThreshold1 and MouseThreshold2 in HKEY_CURRENT_USER\Control Panel\Mouse, but they seem to have no effect over this. (they are currently on (20, 20, 16, 6, 10, respectively). What i want: to immediately select an item whenever the mouse gets over its bounds.

  Read the article

• Windows 7 Tray Application

  - by Cpt. Jack

  When I launch an application in Windows 7, it shows up in the tray but no where on my main screen. When I hover over it and select the application, nothing shows up. In order to make the application visible, I need to hover over it, right click and select maximize. Anytime I maximize the screen and then select to make it a smaller window, it also disappears. This is an awfully painful process in judst trying to launch the application. Please help me figure out how to change this to make sure th applicationalways opens into a maximized screen.

  Read the article

• REST API wrapper - class design for 'lite' object responses

  - by sasfrog

  I am writing a class library to serve as a managed .NET wrapper over a REST API. I'm very new to OOP, and this task is an ideal opportunity for me to learn some OOP concepts in a real-life situation that makes sense to me. Some of the key resources/objects that the API returns are returned with different levels of detail depending on whether the request is for a single instance, a list, or part of a "search all resources" response. This is obviously a good design for the REST API itself, so that full objects aren't returned (thus increasing the size of the response and therefore the time taken to respond) unless they're needed. So, to be clear: .../car/1234.json returns the full Car object for 1234, all its properties like colour, make, model, year, engine_size, etc. Let's call this full. .../cars.json returns a list of Car objects, but only with a subset of the properties returned by .../car/1234.json. Let's call this lite. ...search.json returns, among other things, a list of car objects, but with minimal properties (only ID, make and model). Let's call this lite-lite. I want to know what the pros and cons of each of the following possible designs are, and whether there is a better design that I haven't covered: Create a Car class that models the lite-lite properties, and then have each of the more detailed responses inherit and extend this class. Create separate CarFull, CarLite and CarLiteLite classes corresponding to each of the responses. Create a single Car class that contains (nullable?) properties for the full response, and create constructors for each of the responses which populate it to the extent possible (and maybe include a property that returns the response type from which the instance was created). I expect among other things there will be use cases for consumers of the wrapper where they will want to iterate through lists of Cars, regardless of which response type they were created from, such that the three response types can contribute to the same list. Happy to be pointed to good resources on this sort of thing, and/or even told the name of the concept I'm describing so I can better target my research.

  Read the article

• Could a singleton type replace static methods and classes?

  - by MKO

  In C# Static methods has long served a purpose allowing us to call them without instantiating classes. Only in later year have we became more aware of the problems of using static methods and classes. They can’t use interfaces They can’t use inheritance They are hard to test because you can’t make mocks and stubs Is there a better way ? Obviously we need to be able to access library methods without instantiated classes all the time otherwise our code would become pretty cluttered One possibly solution is to use a new keyword for an old concept: the singleton. Singleton’s are global instances of a class, since they are instances we can use them as we would normal classes. In order to make their use nice and practical we'd need some syntactic sugar however Say that the Math class would be of type singleton instead of an actual class. The actual class containing all the default methods for the Math singleton is DefaultMath, which implements the interface IMath. The singleton would be declared as singleton Math : IMath { public Math { this = new DefaultMath(); } } If we wanted to substitute our own class for all math operations we could make a new class MyMath that inherits DefaultMath, or we could just inherit from the interface IMath and create a whole new Class. To make our class the active Math class, you'd do a simple assignment Math = new MyMath(); and voilá! the next time we call Math.Floor it will call your method. Note that for a normal singleton we'd have to write something like Math.Instance.Floor but the compiler eliminates the need for the Instance property Another idea would be to be able to define a singletons as Lazy so they get instantiated only when they're first called, like lazy singleton Math : IMath What do you think, would it have been a better solution that static methods and classes? Is there any problems with this approach?

  Read the article

• Can't copy paste on the first try

  - by Sunny88

  When I try to copy and paste something from firefox to say notepad or word, it doesn't work on the first try. That is I go to firefox, select text, right click, select copy, then switch to notepad, right click, select paste, but it pastes not the thing which I copied just now, but whatever was in the clipboard before I copied. If after this I go back to firefox and copy that text again, and then go back to notepad, then it will paste correctly. So in order to copy paste something it takes me 2 tries. This doesn't always happen this way, but only sometimes. So sometimes I can paste on first try, but sometimes it takes me two tries. I am using firefox 7.0.1 and windows 7. Also it is not only with firefox, sometimes the same thing happens when I copy paste from other programs. What could be the reason, and how can I fix this?

  Read the article

• How to get back win32 executable file

  - by Ahmed Ezz

  i make something by wrong... when i right click into .exe file then choose OPEN with and i select choose a program then i select wrong program to open with... then i checked the checkBox that have the label [Always use the selected program to open this kind of file]... The Problem??? All .exe file changed into the wrong program i select it-- so all .exe file opened with this program... My Question?? HOW to get back all .exe file to the regular work..?? and thanks in advance :)

  Read the article

• Simplifying data search using .NET

  - by Peter

  An example on the asp.net site has an example of using Linq to create a search feature on a Music album site using MVC. The code looks like this - public ActionResult Index(string movieGenre, string searchString) { var GenreLst = new List<string>(); var GenreQry = from d in db.Movies orderby d.Genre select d.Genre; GenreLst.AddRange(GenreQry.Distinct()); ViewBag.movieGenre = new SelectList(GenreLst); var movies = from m in db.Movies select m; if (!String.IsNullOrEmpty(searchString)) { movies = movies.Where(s => s.Title.Contains(searchString)); } if (!string.IsNullOrEmpty(movieGenre)) { movies = movies.Where(x => x.Genre == movieGenre); } return View(movies); } I have seen similar examples in other tutorials and I have tried them in a real-world business app that I develop/maintain. In practice this pattern doesn't seem to scale well because as the search criteria expands I keep adding more and more conditions which looks and feels unpleasant/repetitive. How can I refactor this pattern? One idea I have is to create a column in every table that is "searchable" which could be a computed column that concatenates all the data from the different columns (SQL Server 2008). So instead of having movie genre and title it would be something like. if (!String.IsNullOrEmpty(searchString)) { movies = movies.Where(s => s.SearchColumn.Contains(searchString)); } What are the performance/design/architecture implications of doing this? I have also tried using procedures that use dynamic queries but then I have just moved the ugliness to the database. E.g. CREATE PROCEDURE [dbo].[search_music] @title as varchar(50), @genre as varchar(50) AS -- set the variables to null if they are empty IF @title = '' SET @title = null IF @genre = '' SET @genre = null SELECT m.* FROM view_Music as m WHERE (title = @title OR @title IS NULL) AND (genre LIKE '%' + @genre + '%' OR @genre IS NULL) ORDER BY Id desc OPTION (RECOMPILE) Any suggestions? Tips?

  Read the article

• How to make a dropdown list such that... (see details)

  - by daysandtimes

  I want to plot the stock prices of certain companies VS the S&P500. I have all the price data downloaded in my excel sheet already. I want to create a line graph in Excel. One line is fixed and that would be the S&P500, and the other would be the company I select. I know how to use data validation to create a dropdown list, but how could I make it in such a way that when I select company A, I would only see company A's price data but not company B, C, etc. Then when I select company B, I would only see company B's price data & the S&P price data. And so on. The S&P line will be visible all the time, but the various company's price line will only appear if it is selected. Is there any easy way to normalize all sets of data in a way such that the starting point is always 100?

  Read the article

• Dual boot 12.04 and W7 - keybaord and screen not responsive

  - by Saariko

  I installed 12.04 using WUBI on a working W7 64bit system. both KB and mouse work perfect during the BIOS boot, and on the bootmgr, I can select Windows 7 or Ubuntu to load. Once I select Ubuntu, the KB and mouse seem to loose their power (light on the mouse and Numlock leds go off) After couple of seconds, the screen gets blurry. The screen pops back at the Ubuntu login screen, the mouse gets activated (light works, as well as mouse pointer is moving) However, the keyboard is not responsive to any click, nor does any icon on the login screen. - Using the mouse, I can't select the virtual keyboard, nor the shutdown icon - like it's not accepting any mouse clicks. The following Q&A didn't answer: Keyboard not responding at login with 12.04 dual boot on toshiba satellite L775 which links to a post on the web I also tried 12.04 - Windows 7 Dual boot - not responding to keyboard in boot menu - that goes beyond the login screen, but still didnt' assist me. It's a wired USB KB The board is an Intel board, and there isn't even a PS/2 connection anymore. Tried moving around the USB's Tried removing the Mouse, and only have the KB. Neither helped.

  Read the article

• asterisk outbound caller id

  - by MCS

  I'm trying to set the caller id number for an outbound call. My asterisk .call file looks like this: Channel: SIP/flowroute/1234567890 Context: test Extension: 1234567890 Priority: 1 Here's my extensions.conf: [test] exten => _1NXXXXXXXXX,1,Set(CALLERID(num)=8005552222) exten => _1NXXXXXXXXX,n,Dial(SIP/${EXTEN}@flowroute) exten => _1NXXXXXXXXX,n,Playback(hello-world) When I receive the call, the caller id number is 1-206-445-6979, even though the CDR log has both src and clid set to 8005552222. I'm using flowroute as my carrier. Is there something wrong on their side?

  Read the article

• New functionality in TFS Build Manager &ndash; Managing Triggers and Build Resources

  - by Jakob Ehn

  Yesterday we pushed out a new release (August 2012) of the Community TFS Build Extension, including a new version of the Community TFS Build Manager (1.0.4.6) The two big new features in the Build Manager in this release are: Set Triggers It is now possible to select one or more build definitions and update the triggers for them in one simple operation: You’ll note that we have started collapsing the context menu a bit, the list of commands are getting long! When selecting the Trigger command, you’ll see a dialog where the options should be self-explanatory: The only thing missing here is the Scheduled trigger option, you’ll have to do that using Team Explorer for now.   Manage Build Resources The other feature is that it is now possible to view the build controllers and agents in your current collection and also perform some actions against them. The new functionality is available by select the Build Resources item in the drop down menu: Selecting this, you’ll see a (sort of) hierarchical view of the build controllers and their agents: In this view you can quickly see all the resources and their status. You can also view the build directory of each build agent and the tags that are associated with them. On the action menu, you can enable and disable both agents and controllers (several at a time), and you can also select to remove them. By selecting Manage, you’ll be presented with the standard Manage Controller dialog from Visual Studio where you can set the rest of the properties. Hopefully we’ll be able to implement most of the existing functionality so that we can remove that menu option Our plan is to add more functionality to this view, such as adding new agents/controllers, restarting build service hosts, maybe view diagnostic information such as disk space and error logs.   Hope you’ll find the new functionality useful. Remember to log any bugs and feature requests on the CodePlex site. Happy building!

  Read the article

• How do I get my internal HDD to mount at startup?

  - by el_gallo_azul

  It's either not intuitive or not working in Ubuntu 14.04. I want to mount my internal HDD at at startup (I boot from an SSD). I attempt to set this, following this procedure: Open Disks utility Select the disk Below the disk's Volumes, click on the More actions button Select Edit Mount Options... Select Automatic Mount Options "Off" Under Mount Options, ensure that Mount at startup is selected Click OK Enter password into Authenticate dialog box Restart but this procedure doesn't work. Upon rebooting, and after Grub attempts to start Ubuntu, I receive the error message "An error occurred while mounting /mnt/4f721fc0-8072-453f-b48f-ca686bd89549. Press S to skip mounting or M for manual recovery". That identifier "4f721fc0-8072-453f-b48f-ca686bd89549" was automatically assigned by Ubuntu. I press S and the boot process continues OK. If I try to mount the disk immediately after booting, I receive the error message "Unable to access "Storage"" (I named the volume Storage). So then I start the Disks utility and set it to Automatic Mount Options "On" and reboot. To me, it seems like this should work, but it doesn't. Here are a number of photos of the process (Alt+PrtScn doesn't work after selecting More actions).

  Read the article

• Ubuntu 13.10. After login, no desktop displayed. Two Nvidia Graphics Cards, Four Monitors

  - by jmerkow

  I am working on an issue with my Ubuntu 13.10 installation. I am attempting to get 4 monitors up and running but I am having some trouble. So far, I installed and updated to the latest NVIDIA drivers (331.20). Initially X would not start (after installation) so I replaced my xorg.conf with xorg.conf.failsafe. This fixed that problem, but then I tried to enable the other 2 monitors (other video card) and xorg fails to start once again (after I login there is no desktop). I am fairly new to linux but I am not a complete beginner, but I'm not comfortable poking around too much on my own to troubleshoot yet.... lspci -nn | grep VGA: 03:00.0 VGA compatible controller [0300]: NVIDIA Corporation GF110 [GeForce GTX 570 Rev. 2] [10de:1086] (rev a1) 05:00.0 VGA compatible controller [0300]: NVIDIA Corporation GF110 [GeForce GTX 580] [10de:1080] (rev a1) It seems that the nvidia-settings tool does not result in a good xorg.conf file. Here it is: # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 331.20 (buildmeister@swio-display-x86-rhel47-05) Wed Oct 30 18:20:32 PDT 2013 Section "ServerLayout" Identifier "Default Layout" Screen 0 "Screen0" 0 0 Screen 1 "Screen1" RightOf "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "1" EndSection ... Section "Monitor" Identifier "Configured Monitor" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "SHARP HDMI" HorizSync 15.0 - 68.0 VertRefresh 55.0 - 76.0 EndSection Section "Monitor" Identifier "Monitor1" VendorName "Unknown" ModelName "Samsung SyncMaster" HorizSync 0.0 - 0.0 VertRefresh 0.0 EndSection Section "Device" Identifier "Configured Video Device" Driver "vesa" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GTX 570" BusID "PCI:3:0:0" EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GTX 580" BusID "PCI:5:0:0" EndSection Section "Screen" Identifier "Default Screen" Device "Configured Video Device" Monitor "Configured Monitor" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "Stereo" "0" Option "nvidiaXineramaInfoOrder" "DFP-1" Option "metamodes" "HDMI-0: nvidia-auto-select +640+0, DVI-I-3: nvidia-auto-select +0+1080" Option "SLI" "Off" Option "MultiGPU" "Off" Option "BaseMosaic" "off" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "Stereo" "0" Option "metamodes" "DVI-I-2: nvidia-auto-select +0+0" Option "SLI" "Off" Option "MultiGPU" "Off" Option "BaseMosaic" "off" SubSection "Display" Depth 24 EndSubSection EndSection Section "Extensions" Option "Composite" "Disable" EndSection

  Read the article

• Resolving Domainnames differently for different services

  - by mlaug

  Some time ago we had an issue with our network infrastructure and php with curl. Our Network infrastructure is fairly simple. LoadBalancer/Firewall = 5 servers The Domainname of our website is set to the ip of the Loadbalancer, of course. But calling curl from one of the servers did result in a timeout. It appears that a server could not call for its own domain it is serving. So we had to set the domains via /etc/hosts to the sever itself. But now We have implemented a Varnish in front of the Loadbalancer, which we want to automatically purge, once a change on a page happens. So now we need to call the domain www.example.com/url_to_purge. Sadly this call what be resolved to the server itself instead of the varnish, because of the /etc/hosts entries. So now I am wondering, if you could resolve domain names differently for different services :)

  Read the article

• asterisk Dial-plan?

  - by Rev

  Hi I want to make a dial plan for asterisk to do this: for incoming-call check the caller-id and if caller id is equal with specific number (for example 666) then hangup that call.(this dial-plan also known as anti ex-girlfriend ) also I wrote this dial-plan for doing this but it doesn't work well.(don't hangup then incoming call from 666 and go to queue macro) [macro-queue] exten => s, 2, Queue(${ARG1}) [default] exten => s, 1, Answer exten => s/666, 2 ,Hangup exten => s, 2, BackGround(welcome) exten => s, 3, Macro(queue,operator)

  Read the article

• Sprite batching seems slow

  - by Dekowta

  I have implemented a sprite batching system in OpenGL which will batch sprites based on their texture. How ever when I'm rendering ~5000 sprites all using the same texture i'm getting roughly 30fps. The process is as followed create sprite batch which also create a VBO with a set size and also creates the shaders as well call begin and initialise the render mode (at the moment just setting alpha on) call Draw with a sprite. This checks to see if the texture of the sprite has already been loaded and if so it just creates a pointer to the batch item and adds the new sprite coords. If not then it creates a new batch item and adds the sprite coords to that; it adds the batch item to the main batch. if the max sprite count is reached render will be called call end which calls render to render the left over sprites in the batch. and also resets the buffer offset render loops through each item in the batch and will bind the texture of the batch item, map the data to the buffer and then draw the array. the buffer will then be offset by the amount of sprites drawn. I have a feeling that it could be the method i'm using to store the batched sprites or it could be something else that i'm missing but I still can work it out. the cpp and h files are as followed http://pastebin.com/ZAytErGB http://pastebin.com/iCB608tA On top of this i'm also getting a weird issue where then two sprites are batched on after the other the second sprite will use the same coordinates as the last. And then when one if drawn after it is fine. I can't seem to find what is causing this issue. any help would be appreciated iv been sat trying to work this all out for a while now and cant seems to put my finger on what's causing it all.

  Read the article

• How can I get Dreamscene wallpapers to change randomly in Win7?

  - by andygrunt

  Having only recently moved over from Windows XP to Windows 7, I’m a big fan of the ‘Dreamscene’ animated wallpaper. I’m also a big fan of the Win 7 ability to select a group of still wallpaper bitmaps and set it to randomly change wallpapers every ‘X’ minutes/hours. What I want is the ability to do the same with the dreamscene animated wallpapers, i.e. select a group and they randomly change every ‘X’ minutes. Beyond that, I’d also like to be able to select a group of stills and animated wallpapers and randomly change between them.

  Read the article

• C# calendar needs Business Logic for real-time reminders? [on hold]

  - by lazfish

  I am not a super experienced C# user, though I have some experience in .Net and VB.Net. Just got this new job and my first assignment is a mission critical part of the business. It is pretty important I get it right so I was hoping for some sage advice. We have created a calendar using jQuery, C#, .Net & SQL Server 08. The calendar works but now we are wanting to add email, SMS and voice-call reminders. We are a small company and can do whatever we need to do with no restrictions on our IT environment. I have some base-line experience with Unix servers but would prefer to stay in the Micro$oft universe if it is prudent to do so. I know how to add the API calls and services to initiate these reminders (using built in email services for email and Twilio.com for SMS). I am asking for advice about how to approach a reliable and timely listener service that knows when to call the service or API for the reminder before an appointment. EG. SMS: "You have a conference call in 30 minutes." I have done some research, but it is hard to know what is a proven reliable approach. What I am looking for is an experienced opinion on a good (or the best) strategy for implementing a solution that will reliably listen for appointments and dispatch the reminders when needed.

  Read the article

• Block unknown callers at work, but let them through if they try again [migrated]

  - by Blazemore

  I have Tasker for Android but I don't know enough about it to be able to implement this. I'd like this to occur when I am connected to a specific wireless network: If someone phones who isn't in my contact list, reject the call immediately (straight to voicemail). If they call again within a certain amount of time (say, 30 seconds) allow the call to come through. Frankly, I can't even get the first one working. I know it's possible. The time thing is a kind of added bonus

  Read the article

• Getting RINGING response on SIP UAC without sending it from the other UAC

  - by TacB0sS

  Hi, I hope this would be my last question about this SIP subject, I have managed to overcome the last issue I had by asking a friend to help me from a remote computer, I'm able to connect between the computers, but here is the thing, according to all the examples I saw, the Callee should invoke the Ringing response, but in my application case I didn't implement it yet, but I still receive on the Caller UAC a Ringing response, this is the SIP messages that are on the caller end: Outgoing Request 5: INVITE sip:[email protected] SIP/2.0 Contact: "Client 310" <sip:[email protected]> From: "Client 310" <sip:[email protected]> Max-Forwards: 32 CSeq: 2 INVITE Call-ID: [email protected] Allow: INVITE,CANCEL,ACK,BYE,OPTIONS Content-Type: application/sdp Proxy-Authorization: Digest username="310",nonce="012afffb",realm="asterisk",uri="sip:[email protected]",algorithm=MD5,response="d19ca5b98450b4be7bd4045edb8a3a2f" Via: SIP/2.0/UDP hostName.hn:5060 To: "Client 320" <sip:[email protected]>;tag=as5a8fa200 Content-Length: 257 v=0 o=310 7108915969559970847 7108915969559970847 IN IP4 xxx.xxx.x.xxx s=- i=Nu-Art Software - TacB0sS VoIP information c=IN IP4 xxx.xxx.x.xxx m=audio 3312 RTP/AVP 0 8 101 a=rtpmap:0 PCMU/8000 a=rtpmap:8 PCMA/8000 a=rtpmap:101 telephone-event/8000 Incoming Response 6: SIP/2.0 100 Trying Via: SIP/2.0/UDP hostName.hn:5060;branch=f8d171d3278788df9e03eb9cf3acba70-xxx.xxx.x.xxx-2-invite-hostName.hn-5060333732;received=79.181.6.233 From: "Client 310" <sip:[email protected]> To: "Client 320" <sip:[email protected]>;tag=as5a8fa200 Call-ID: [email protected] CSeq: 2 INVITE User-Agent: Freeswitch 1.2.3 Allow: INVITE,ACK,CANCEL,OPTIONS,BYE,REFER,SUBSCRIBE,NOTIFY,INFO Supported: replaces Contact: <sip:[email protected]> Content-Length: 0 Incoming Response 7: SIP/2.0 180 Ringing Via: SIP/2.0/UDP hostName.hn:5060;branch=f8d171d3278788df9e03eb9cf3acba70-xxx.xxx.x.xxx-2-invite-hostName.hn-5060333732;received=79.181.6.233 From: "Client 310" <sip:[email protected]> To: "Client 320" <sip:[email protected]>;tag=as5a8fa200 Call-ID: [email protected] CSeq: 2 INVITE User-Agent: Freeswitch 1.2.3 Allow: INVITE,ACK,CANCEL,OPTIONS,BYE,REFER,SUBSCRIBE,NOTIFY,INFO Supported: replaces Contact: <sip:[email protected]> Content-Length: 0 Call to: [email protected] is Ringing Incoming Response 8: SIP/2.0 183 Session Progress Via: SIP/2.0/UDP hostName.hn:5060;branch=f8d171d3278788df9e03eb9cf3acba70-xxx.xxx.x.xxx-2-invite-hostName.hn-5060333732;received=79.181.6.233 From: "Client 310" <sip:[email protected]> To: "Client 320" <sip:[email protected]>;tag=as5a8fa200 Call-ID: [email protected] CSeq: 2 INVITE User-Agent: Freeswitch 1.2.3 Allow: INVITE,ACK,CANCEL,OPTIONS,BYE,REFER,SUBSCRIBE,NOTIFY,INFO Supported: replaces Contact: <sip:[email protected]> Content-Type: application/sdp Content-Length: 264 v=0 o=root 27669 27669 IN IP4 yy.yy.yy.yy s=session c=IN IP4 yy.yy.yy.yy t=0 0 m=audio 10914 RTP/AVP 0 8 101 a=rtpmap:0 PCMU/8000 a=rtpmap:8 PCMA/8000 a=rtpmap:101 telephone-event/8000 a=fmtp:101 0-16 a=silenceSupp:off - - - - a=ptime:20 a=sendrecv Incoming Response 9: SIP/2.0 503 Service Unavailable Via: SIP/2.0/UDP hostName.hn:5060;branch=f8d171d3278788df9e03eb9cf3acba70-xxx.xxx.x.xxx-2-invite-hostName.hn-5060333732;received=79.181.6.233 From: "Client 310" <sip:[email protected]> To: "Client 320" <sip:[email protected]>;tag=as5a8fa200 Call-ID: [email protected] CSeq: 2 INVITE User-Agent: Freeswitch 1.2.3 Allow: INVITE,ACK,CANCEL,OPTIONS,BYE,REFER,SUBSCRIBE,NOTIFY,INFO Supported: replaces Content-Length: 0 I do not respond to the invite, that is why all this is happening, but why am I getting a ringing if I'm not the one sending it. Thanks, Adam.

  Read the article

• JQuery SelectToUISlider Issues

  - by David Savage

  Hopefully this hasn't been asked before as just a slider question, but I couldn't find an answer when already browsing questions. So, here goes: I have a SelectToUISlider (http://www.filamentgroup.com/lab/update_jquery_ui_slider_from_a_select_element_now_with_aria_support/) which is basically a modified JQuery UI Slider, and I'm using a range value. So, I start with one handle at 60, and another at 100 (scale from 0 to 100). What I want to do is click a radio button so that the 100 changes to a 0, and be able to change back to 100. I have been unsuccessful at changing it via JQuery selectors/javascript. However, when changing the selects to move the handles, this works, but the range appears not to follow if the second handle (at 100) moves to 0 behind the first handle (at 60). I'm thinking I might have to destroy the slider and rebuild it with the second handle (that starts as 100) become the first handle at 0 in this scenario (although I've tried destroying it and it doesn't seem to respond to that either.) Here's what I've tried so far that doesn't work: <script type="text/javascript"> {literal} $(function(){ $('select').selectToUISlider({ labels: 10 }); }); function event_occurs(does) { if (does == 1) { $('.ui-slider').slider('option', 'values', [60,100]); } else { $('.ui-slider').slider('option', 'values', [0,60]); } } </script> <style type="text/css"> form {font-size: 62.5%; font-family:"Segoe UI","Helvetica Neue",Helvetica,Arial,sans-serif; } fieldset { border:0; margin: 1em; height: 12em;} label {font-weight: normal; float: left; margin-right: .5em; font-size: 1.1em;} select {margin-right: 1em; float: left;} .ui-slider {clear: both; top: 5em;} .ui-slider-tooltip {white-space: nowrap;} </style> {/literal} <form action="#"> <fieldset> <select name="valueA" id="my_estimate"> {section name="estimates" loop=101} <option value="{$smarty.section.estimates.index}"{if $smarty.section.estimates.index == 60} selected{/if}>{$smarty.section.estimates.index}</option> {/section} </select> <select name="valueB" id="payout"> {section name="estimates" loop=101} <option value="{$smarty.section.estimates.index}"{if $smarty.section.estimates.index == 100} selected{/if}>{$smarty.section.estimates.index}</option> {/section} </select> </fieldset> </form> <input type="radio" onclick="event_occurs(1)" name="Event" checked="checked"> Event Occurs<br /> <input type="radio" onclick="event_occurs(0)" name="Event"> Event Does Not Occur As it is now, nothing happens when clicking the radio buttons, but I'm also not getting any Javascript errors. After I get this working, I would also like to find some way to disable one of the handles through changing the slider property. Ie leave the handle where its at but not allow it to be dragged. Any help is greatly appreciated.

  Read the article

• How to get IMediaControl.Run() to start a file playing with no delay

  - by MusiGenesis

  I am attempting to use DirectShow to play two AVI files consecutively (one after the other) so that there is no interruption in the audio or video when the player transitions from one file to the next. I have two custom controls on my form. Each one is pre-loaded with an AVI file, and before playback begins I set up all the DirectShow interfaces, set the video windows and resize them, call IMediaControl.Run(), then IMediaControl.Pause(), then IMediaSeeking.SetPositions to reset to frame 0, on both controls. On the form, you can see that both files are paused at their initial frames. I then call IMediaControl.Run() on the first control, and wait for it to complete before calling Run() on the second control. Initially, I hooked into the first video's EC_COMPLETE notification message, and used this to start the second. Thinking that this event might be slow to arrive (turns out it is, but for a weird reason), I tried two other approaches: Check the first video's current position inside a timer that goes off every second or so (using IMediaPosition.get_CurrentPosition). When the current position is within a second of the video's stop time (known in advance from IMediaPosition.get_StopTime), I go into a tight while loop and wait for the current position to equal the stop time, and then call Run() on the second video. Same as the first, except I replace the while loop with a call to timeSetEvent from winmm.dll, with a delay set so that it fires right when the first file is supposed to end. I use the callback to Run() the second file. Either of these two methods substantially cuts down the delay between the end of the first file and the beginning of the second, indicating that the EC_COMPLETE message doesn't arrive immediately after the file is complete (I also tried hooking the EC_SEGMENT_COMPLETE message, which is supposed to be used for looping within a file, but apparently nobody supports this - it never occurs on my machine, at least). Doing all of the above has cut the transition delay from as much as a second, down to a barely perceptible glitch; about a third of the time the files transition with no interruption at all, which suggests there's no fundamental reason I can't get this to work all the time. The slight delay is still unacceptable, unfortunately. I assume (and I could easily be wrong) that the remaining delay is due to a slight variable delay between the call to IMediaControl.Run() and when the video actually starts playing. Does anybody know anything I can do to eliminate this little lag? It would also help to be told this is fundamentally impossible for whatever reason, which wouldn't surprise me. I've never encountered a video player in Windows that doesn't have this problem, so it may not be doable. More info: the AVI files I'm playing are completely uncompressed (video and audio are uncompressed), so I don't think the lag is due to DirectShow's having to uncompress the video ahead of play start, although it may still buffer ahead as matter of course (and this may be the source of the problem). I would have though that starting play, pausing and then rewinding to the beginning would fix this. Also, the way I'm handling the transition is to actually have the second control underneath the first; when the first completes playing, I start the second and then call BringToFront on it, creating the appearance of a single video transitioning between the two originals. I don't think the glitch is due to this, because it works perfectly some of the time, and even if this were problematic, it wouldn't explain the matching audio glitch. Even more: I just tried starting the second video 30-50 milliseconds "early" and that seemed to eliminate even more of the gap, so I'm guessing that the lag in Run() is about that long. It appears to be variable, though, so this is still not where I need it to be.

  Read the article

• Win32: IProgressDialog will not disappear until you mouse over it.

  - by Ian Boyd

  i'm using the Win32 progress dialog. The damnest thing is that when i call: progressDialog.StopProgressDialog(); it doesn't disappear. It stays on screen until the user moves her mouse over it - then it suddenly disappers. The call to StopProgressDialog returns right away (i.e. it's not a synchronous call). i can prove this by doing things after the call has returned: private void button1_Click(object sender, EventArgs e) { //Force red background to prove we've started this.BackColor = Color.Red; this.Refresh(); //Start a progress dialog IProgressDialog pd = (IProgressDialog)new ProgressDialog(); pd.StartProgressDialog(this.Handle, null, PROGDLG.Normal, IntPtr.Zero); //The long running operation System.Threading.Thread.Sleep(10000); //Stop the progress dialog pd.SetLine(1, "Stopping Progress Dialog", false, IntPtr.Zero); pd.StopProgressDialog(); pd = null; //Return form to normal color to prove we've stopped. this.BackColor = SystemColors.Control; this.Refresh(); } The form: starts gray turns red to show we've stared turns back to gray color to show we've called stop So the call to StopProgressDialog has returned, except the progress dialog is still sitting there, mocking me, showing the message: Stopping Progress Dialog Doesn't Appear for 10 seconds Additionally, the progress dialog does not appear on screen until the System.Threading.Thread.Sleep(10000); ten second sleep is over. Not limited to .NET WinForms The same code also fails in Delphi, which is also an object wrapper around Window's windows: procedure TForm1.Button1Click(Sender: TObject); var pd: IProgressDialog; begin Self.Color := clRed; Self.Repaint; pd := CoProgressDialog.Create; pd.StartProgressDialog(Self.Handle, nil, PROGDLG_NORMAL, nil); Sleep(10000); pd.SetLine(1, StringToOleStr('Stopping Progress Dialog'), False, nil); pd.StopProgressDialog; pd := nil; Self.Color := clBtnFace; Self.Repaint; end; PreserveSig An exception would be thrown if StopProgressDialog was failing. Most of the methods in IProgressDialog, when translated into C# (or into Delphi), use the compiler's automatic mechanism of converting failed COM HRESULTS into a native language exception. In other words the following two signatures will throw an exception if the COM call returned an error HRESULT (i.e. a value less than zero): //C# void StopProgressDialog(); //Delphi procedure StopProgressDialog; safecall; Whereas the following lets you see the HRESULT's and react yourself: //C# [PreserveSig] int StopProgressDialog(); //Delphi function StopProgressDialog: HRESULT; stdcall; HRESULT is a 32-bit value. If the high-bit is set (or the value is negative) it is an error. i am using the former syntax. So if StopProgressDialog is returning an error it will be automatically converted to a language exception. Note: Just for SaG i used the [PreserveSig] syntax, the returned HRESULT is zero; MsgWait? The symptom is similar to what Raymond Chen described once, which has to do with the incorrect use of PeekMessage followed by MsgWaitForMultipleObjects: "Sometimes my program gets stuck and reports one fewer record than it should. I have to jiggle the mouse to get the value to update. After a while longer, it falls two behind, then three..." But that would mean that the failure is in IProgressDialog, since it fails equally well on CLR .NET WinForms and native Win32 code.

  Read the article

• validating cascading dropdownlist

  - by shruti

  i am working on MVC.Net. in that i have used cascading dropdownlist. I want to do validations for blank field. the view page coding is: Select Category: <%= Html.DropDownList("Makes", ViewData["Makes"] as SelectList,"Select Category")% Select Subcategory: <%= Html.CascadingDropDownList("Models", "Makes")% the code on controller: public ActionResult AddSubCategoryPage() { var makeList = new SelectList(entityObj.Category.ToList(), "Category_id", "Category_name"); ViewData["Makes"] = makeList; // Create Models view data var modelList = new CascadingSelectList(entityObj.Subcategory1.ToList(), "Category_id", "Subcategory_id", "Subcategory_name"); ViewData["Models"] = modelList; return View("AddSubCategoryPage"); } and for that i have made one class: public static class JavaScriptExtensions { public static string CascadingDropDownList(this HtmlHelper helper, string name, string associatedDropDownList) { var sb = new StringBuilder(); // render select tag sb.AppendFormat("<select name='{0}' id='{0}'></select>", name); sb.AppendLine(); // render data array sb.AppendLine("<script type='text/javascript'>"); var data = (CascadingSelectList)helper.ViewDataContainer.ViewData[name]; var listItems = data.GetListItems(); var colArray = new List<string>(); foreach (var item in listItems) colArray.Add(String.Format("{{key:'{0}',value:'{1}',text:'{2}'}}", item.Key, item.Value, item.Text)); var jsArray = String.Join(",", colArray.ToArray()); sb.AppendFormat("$get('{0}').allOptions=[{1}];", name, jsArray); sb.AppendLine(); sb.AppendFormat("$addHandler($get('{0}'), 'change', Function.createCallback(bindDropDownList, $get('{1}')));", associatedDropDownList, name); sb.AppendLine(); sb.AppendLine("</script>"); return sb.ToString(); } } public class CascadingSelectList { private IEnumerable _items; private string _dataKeyField; private string _dataValueField; private string _dataTextField; public CascadingSelectList(IEnumerable items, string dataKeyField, string dataValueField, string dataTextField) { _items = items; _dataKeyField = dataKeyField; _dataValueField = dataValueField; _dataTextField = dataTextField; } public List<CascadingListItem> GetListItems() { var listItems = new List<CascadingListItem>(); foreach (var item in _items) { var key = DataBinder.GetPropertyValue(item, _dataKeyField).ToString(); var value = DataBinder.GetPropertyValue(item, _dataValueField).ToString(); var text = DataBinder.GetPropertyValue(item, _dataTextField).ToString(); listItems.Add(new CascadingListItem(key, value, text)); } return listItems; } } public class CascadingListItem { public CascadingListItem(string key, string value, string text) { this.Key = key; this.Value = value; this.Text = text; } public string Key { get; set; } public string Value { get; set; } public string Text { get; set; } } but when i run the aaplication it gives me following error: Server Error in '/' Application. The parameters dictionary contains a null entry for parameter 'Models' of non-nullable type 'System.Int32' for method 'System.Web.Mvc.ActionResult AddSubCategoryPage(Int32, System.String, System.String)' in 'CMS.Controllers.HomeController'. An optional parameter must be a reference type, a nullable type, or be declared as an optional parameter. Parameter name: parameters . plz help me.

  Read the article

< Previous Page | 293 294 295 296 297 298 299 300 301 302 303 304  | Next Page >