Search Results

Search found 33716 results on 1349 pages for 'smtp access'.

Page 298/1349 | < Previous Page | 294 295 296 297 298 299 300 301 302 303 304 305  | Next Page >

• Accessing Virtual Host from outside LAN

  - by Ray

  I'm setting up a web development platform that makes things as easy as possible to write and test all code on my local machine, and sync this with my web server. I setup several virtual hosts so that I can access my projects by typing in "project" instead of "localhost/project" as the URL. I also want to set this up so that I can access my projects from any network. I signed up for a DYNDNS URL that points to my computer's IP address. This worked great from anywhere before I setup the virtual hosts. Now when I try to access my projects by typing in my DYNDNS URL, I get the 403 Forbidden Error message, "You don't have permission to access / on this server." To setup my virtual hosts, I edited two files - hosts in the system32/drivers/etc folder, and httpd-vhosts.conf in the Apache folder of my WAMP installation. In the hosts file, I simply added the server name to associate with 127.0.0.1. I added the following to the http-vhosts.conf file: <VirtualHost *:80> ServerAdmin webmaster@localhost DocumentRoot "c:/wamp/www/ladybug" ServerName ladybug ErrorLog "logs/your_own-error.log" CustomLog "logs/your_own-access.log" common </VirtualHost> <VirtualHost *:80> ServerAdmin webmaster@localhost DocumentRoot "c:/wamp/www" ServerName localhost ErrorLog "logs/localhost-error.log" CustomLog "logs/localhost-access.log" common </VirtualHost> Any idea why I can't access my projects from typing in my DYNDNS URL? Also, is it possible to setup virtual hosts so that when I type in http://projects from a random computer outside of my network, I access url.dyndns.info/projects (a.k.a. my WAMP projects on my home computer)? Help is much appreciated, thanks!

  Read the article

• Fortinet: Is there any equivalent of the ASA's packet-tracer command?

  - by Kedare

  I would like to know if there is not Fortigates an equivalent of the packet-tracer command that we can find on the ASA. Here is an example of execution for those who don't know it: NAT and pass : lev5505# packet-tracer input inside tcp 192.168.3.20 9876 8.8.8.8 80 Phase: 1 Type: ACCESS-LIST Subtype: Result: ALLOW Config: Implicit Rule Additional Information: MAC Access list Phase: 2 Type: ROUTE-LOOKUP Subtype: input Result: ALLOW Config: Additional Information: in 0.0.0.0 0.0.0.0 outside Phase: 3 Type: ACCESS-LIST Subtype: log Result: ALLOW Config: access-group inside-in in interface inside access-list inside-in extended permit tcp any any eq www access-list inside-in remark Allows DNS Additional Information: Phase: 4 Type: IP-OPTIONS Subtype: Result: ALLOW Config: Additional Information: Phase: 5 Type: VPN Subtype: ipsec-tunnel-flow Result: ALLOW Config: Additional Information: Phase: 6 Type: NAT Subtype: Result: ALLOW Config: object network inside-network nat (inside,outside) dynamic interface Additional Information: Dynamic translate 192.168.3.20/9876 to 81.56.15.183/9876 Phase: 7 Type: IP-OPTIONS Subtype: Result: ALLOW Config: Additional Information: Phase: 8 Type: FLOW-CREATION Subtype: Result: ALLOW Config: Additional Information: New flow created with id 94755, packet dispatched to next module Result: input-interface: inside input-status: up input-line-status: up output-interface: outside output-status: up output-line-status: up Action: allow Blocked by ACL: lev5505# packet-tracer input inside tcp 192.168.3.20 9876 8.8.8.8 81 Phase: 1 Type: ROUTE-LOOKUP Subtype: input Result: ALLOW Config: Additional Information: in 0.0.0.0 0.0.0.0 outside Phase: 2 Type: ACCESS-LIST Subtype: Result: DROP Config: Implicit Rule Additional Information: Result: input-interface: inside input-status: up input-line-status: up output-interface: outside output-status: up output-line-status: up Action: drop Drop-reason: (acl-drop) Flow is denied by configured rule Is there any equivalent on the Fortigates ?

  Read the article

• Windows Share authentication from Active Directory Linux login

  - by Kenny

  I'm using Active Directory to log into RHEL. To do this, I followed the steps outlined here: http://www.markwilson.co.uk/blog/2007/05/using-active-directory-to-authenticate-users-on-a-linux-computer.htm I'd like to be able to read data from Windows Servers shared folders without being prompted for a password. On Windows I log into an AD domain, and when I access windows file shares on a server on the LAN (also part of the AD domain) my I can just access them with no authentication step. I've used SMBclient on Linux to access these shares, but it asks for my password. I would like to be able to script access to the data on the shares, but I can't if there's a password prompt in the way. Well, I could, but it's not how I want to do it. Now, since I'm logged in using my active directory username & password, can't I just access the shares without jumping that extra hoop? I know I can mount the share using something like: //192.168.0.5/share /mnt/windows cifs auto,username=steve,password=secret,rw 0 0 but access will depend who is logged in... each user logging in should have their own unique AD access privelages. Thanks for reading!

  Read the article

• Shell command slow when using pipe, fast with intermediate file

  - by plang

  Does anyone understand this huge difference in processing time, when using an intermediate file, or when using a pipe? I'm converting tiff to pdf using standard tools on a fresh debian squeeze server. A standard way of doing this is to convert to ps first. Without pipe: root@web5:~# time tiff2ps test.tif > test.ps real 0m0.860s user 0m0.744s sys 0m0.112s root@web5:~# time ps2pdf13 -sPAPERSIZE=a4 test.ps > test.pdf real 0m0.667s user 0m0.612s sys 0m0.060s With pipe: root@web5:~# time tiff2ps test.tif | ps2pdf13 -sPAPERSIZE=a4 - > test.pdf real 1m6.098s user 0m15.861s sys 0m50.9 During the last command, gs process is at 100% all the time. Update: Here is an strace output for the ps generation: root@web5:~# strace tiff2ps test.tif > test.ps execve("/usr/bin/tiff2ps", ["tiff2ps", "test.tif"], [/* 28 vars */]) = 0 brk(0) = 0x1395000 access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory) mmap(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fb5a1937000 access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or directory) open("/etc/ld.so.cache", O_RDONLY) = 3 fstat(3, {st_mode=S_IFREG|0644, st_size=21735, ...}) = 0 mmap(NULL, 21735, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7fb5a1931000 close(3) = 0 access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory) open("/usr/lib/libtiff.so.4", O_RDONLY) = 3 read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0P\200\0\0\0\0\0\0"..., 832) = 832 fstat(3, {st_mode=S_IFREG|0644, st_size=405128, ...}) = 0 mmap(NULL, 2501416, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7fb5a14b9000 mprotect(0x7fb5a151a000, 2093056, PROT_NONE) = 0 mmap(0x7fb5a1719000, 12288, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x60000) = 0x7fb5a1719000 close(3) = 0 access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory) open("/usr/lib/libjpeg.so.62", O_RDONLY) = 3 read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\3408\0\0\0\0\0\0"..., 832) = 832 fstat(3, {st_mode=S_IFREG|0644, st_size=145048, ...}) = 0 mmap(NULL, 2240080, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7fb5a1296000 mprotect(0x7fb5a12b9000, 2093056, PROT_NONE) = 0 mmap(0x7fb5a14b8000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x22000) = 0x7fb5a14b8000 close(3) = 0 access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory) open("/usr/lib/libz.so.1", O_RDONLY) = 3 read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\260\"\0\0\0\0\0\0"..., 832) = 832 fstat(3, {st_mode=S_IFREG|0644, st_size=93936, ...}) = 0 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fb5a1930000 mmap(NULL, 2188976, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7fb5a107f000 mprotect(0x7fb5a1096000, 2093056, PROT_NONE) = 0 mmap(0x7fb5a1295000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x16000) = 0x7fb5a1295000 close(3) = 0 access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory) open("/lib/libm.so.6", O_RDONLY) = 3 read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\360>\0\0\0\0\0\0"..., 832) = 832 fstat(3, {st_mode=S_IFREG|0644, st_size=530736, ...}) = 0 mmap(NULL, 2625768, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7fb5a0dfd000 mprotect(0x7fb5a0e7d000, 2097152, PROT_NONE) = 0 mmap(0x7fb5a107d000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x80000) = 0x7fb5a107d000 close(3) = 0 access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory) open("/lib/libc.so.6", O_RDONLY) = 3 read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\240\355\1\0\0\0\0\0"..., 832) = 832 fstat(3, {st_mode=S_IFREG|0755, st_size=1437064, ...}) = 0 mmap(NULL, 3545160, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7fb5a0a9b000 mprotect(0x7fb5a0bf4000, 2093056, PROT_NONE) = 0 mmap(0x7fb5a0df3000, 20480, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x158000) = 0x7fb5a0df3000 mmap(0x7fb5a0df8000, 18504, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7fb5a0df8000 close(3) = 0 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fb5a192f000 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fb5a192e000 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fb5a192d000 arch_prctl(ARCH_SET_FS, 0x7fb5a192e700) = 0 mprotect(0x7fb5a0df3000, 16384, PROT_READ) = 0 mprotect(0x7fb5a107d000, 4096, PROT_READ) = 0 mprotect(0x7fb5a1939000, 4096, PROT_READ) = 0 munmap(0x7fb5a1931000, 21735) = 0 open("test.tif", O_RDONLY) = 3 brk(0) = 0x1395000 brk(0x13b6000) = 0x13b6000 read(3, "II*\0\10\0\0\0", 8) = 8 fstat(3, {st_mode=S_IFREG|0644, st_size=1825656, ...}) = 0 mmap(NULL, 1825656, PROT_READ, MAP_SHARED, 3, 0) = 0x7fb5a176f000 open("/proc/meminfo", O_RDONLY) = 4 fstat(4, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fb5a1936000 read(4, "MemTotal: 2090844 kB\nMemF"..., 1024) = 1024 close(4) = 0 munmap(0x7fb5a1936000, 4096) = 0 write(2, "TIFFReadDirectory: ", 19TIFFReadDirectory: ) = 19 write(2, "Warning, ", 9Warning, ) = 9 write(2, "test.tif: wrong data type 7 for "..., 59test.tif: wrong data type 7 for "RichTIFFIPTC"; tag ignored) = 59 write(2, ".\n", 2. ) = 2 gettimeofday({1334836895, 374666}, NULL) = 0 fstat(1, {st_mode=S_IFREG|0664, st_size=0, ...}) = 0 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fb5a1936000 open("/etc/localtime", O_RDONLY) = 4 fstat(4, {st_mode=S_IFREG|0644, st_size=1892, ...}) = 0 fstat(4, {st_mode=S_IFREG|0644, st_size=1892, ...}) = 0 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fb5a1935000 read(4, "TZif2\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\4\0\0\0\4\0\0\0\0"..., 4096) = 1892 lseek(4, -1217, SEEK_CUR) = 675 read(4, "TZif2\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\6\0\0\0\6\0\0\0\0"..., 4096) = 1217 close(4) = 0 munmap(0x7fb5a1935000, 4096) = 0 write(1, "%!PS-Adobe-3.0 EPSF-3.0\n%%Creato"..., 4096) = 4096 write(1, "fffffffffffffffffffffffffffff\nff"..., 4096) = 4096 write(1, "ffffffffffffffffffff\nfffffffffff"..., 4096) = 4096 write(1, "fffffffffff\nffffffffffffffffffff"..., 4096) = 4096 write(1, "ff\nfffffffffffffffffffffffffffff"..., 4096) = 4096 write(1, "ffffffffffffffffffffffffffffffff"..., 4096) = 4096 write(1, "ffffffffffffffffffffffffffffffff"..., 4096) = 4096 write(1, "ffffffffffffffffffffffffffffffff"..., 4096) = 4096 write(1, "ffffffffffffffffffffffffffffffff"..., 4096) = 4096 write(1, "ffffffffffffffffffffffff\nfffffff"..., 4096) = 4096 Here is an strace output for the piped version: PS generation seems to be much slower when output is piped into ps2pdf13. root@web5:~# strace tiff2ps test.tif | ps2pdf13 -sPAPERSIZE=a4 - > test.pdf execve("/usr/bin/tiff2ps", ["tiff2ps", "test.tif"], [/* 28 vars */]) = 0 brk(0) = 0x1b97000 access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory) mmap(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f9208bb1000 access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or directory) open("/etc/ld.so.cache", O_RDONLY) = 3 fstat(3, {st_mode=S_IFREG|0644, st_size=21735, ...}) = 0 mmap(NULL, 21735, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7f9208bab000 close(3) = 0 access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory) open("/usr/lib/libtiff.so.4", O_RDONLY) = 3 read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0P\200\0\0\0\0\0\0"..., 832) = 832 fstat(3, {st_mode=S_IFREG|0644, st_size=405128, ...}) = 0 mmap(NULL, 2501416, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f9208733000 mprotect(0x7f9208794000, 2093056, PROT_NONE) = 0 mmap(0x7f9208993000, 12288, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x60000) = 0x7f9208993000 close(3) = 0 access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory) open("/usr/lib/libjpeg.so.62", O_RDONLY) = 3 read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\3408\0\0\0\0\0\0"..., 832) = 832 fstat(3, {st_mode=S_IFREG|0644, st_size=145048, ...}) = 0 mmap(NULL, 2240080, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f9208510000 mprotect(0x7f9208533000, 2093056, PROT_NONE) = 0 mmap(0x7f9208732000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x22000) = 0x7f9208732000 close(3) = 0 access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory) open("/usr/lib/libz.so.1", O_RDONLY) = 3 read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\260\"\0\0\0\0\0\0"..., 832) = 832 fstat(3, {st_mode=S_IFREG|0644, st_size=93936, ...}) = 0 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f9208baa000 mmap(NULL, 2188976, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f92082f9000 mprotect(0x7f9208310000, 2093056, PROT_NONE) = 0 mmap(0x7f920850f000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x16000) = 0x7f920850f000 close(3) = 0 access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory) open("/lib/libm.so.6", O_RDONLY) = 3 read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\360>\0\0\0\0\0\0"..., 832) = 832 fstat(3, {st_mode=S_IFREG|0644, st_size=530736, ...}) = 0 mmap(NULL, 2625768, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f9208077000 mprotect(0x7f92080f7000, 2097152, PROT_NONE) = 0 mmap(0x7f92082f7000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x80000) = 0x7f92082f7000 close(3) = 0 access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory) open("/lib/libc.so.6", O_RDONLY) = 3 read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\240\355\1\0\0\0\0\0"..., 832) = 832 fstat(3, {st_mode=S_IFREG|0755, st_size=1437064, ...}) = 0 mmap(NULL, 3545160, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f9207d15000 mprotect(0x7f9207e6e000, 2093056, PROT_NONE) = 0 mmap(0x7f920806d000, 20480, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x158000) = 0x7f920806d000 mmap(0x7f9208072000, 18504, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7f9208072000 close(3) = 0 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f9208ba9000 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f9208ba8000 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f9208ba7000 arch_prctl(ARCH_SET_FS, 0x7f9208ba8700) = 0 mprotect(0x7f920806d000, 16384, PROT_READ) = 0 mprotect(0x7f92082f7000, 4096, PROT_READ) = 0 mprotect(0x7f9208bb3000, 4096, PROT_READ) = 0 munmap(0x7f9208bab000, 21735) = 0 open("test.tif", O_RDONLY) = 3 brk(0) = 0x1b97000 brk(0x1bb8000) = 0x1bb8000 read(3, "II*\0\10\0\0\0", 8) = 8 fstat(3, {st_mode=S_IFREG|0644, st_size=1825656, ...}) = 0 mmap(NULL, 1825656, PROT_READ, MAP_SHARED, 3, 0) = 0x7f92089e9000 open("/proc/meminfo", O_RDONLY) = 4 fstat(4, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f9208bb0000 read(4, "MemTotal: 2090844 kB\nMemF"..., 1024) = 1024 close(4) = 0 munmap(0x7f9208bb0000, 4096) = 0 write(2, "TIFFReadDirectory: ", 19TIFFReadDirectory: ) = 19 write(2, "Warning, ", 9Warning, ) = 9 write(2, "test.tif: wrong data type 7 for "..., 59test.tif: wrong data type 7 for "RichTIFFIPTC"; tag ignored) = 59 write(2, ".\n", 2. ) = 2 gettimeofday({1334836513, 114140}, NULL) = 0 fstat(1, {st_mode=S_IFIFO|0600, st_size=0, ...}) = 0 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f9208bb0000 open("/etc/localtime", O_RDONLY) = 4 fstat(4, {st_mode=S_IFREG|0644, st_size=1892, ...}) = 0 fstat(4, {st_mode=S_IFREG|0644, st_size=1892, ...}) = 0 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f9208baf000 read(4, "TZif2\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\4\0\0\0\4\0\0\0\0"..., 4096) = 1892 lseek(4, -1217, SEEK_CUR) = 675 read(4, "TZif2\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\6\0\0\0\6\0\0\0\0"..., 4096) = 1217 close(4) = 0 munmap(0x7f9208baf000, 4096) = 0 write(1, "%!PS-Adobe-3.0 EPSF-3.0\n%%Creato"..., 4096) = 4096 write(1, "fffffffffffffffffffffffffffff\nff"..., 4096) = 4096 write(1, "ffffffffffffffffffff\nfffffffffff"..., 4096) = 4096 write(1, "fffffffffff\nffffffffffffffffffff"..., 4096) = 4096 write(1, "ff\nfffffffffffffffffffffffffffff"..., 4096) = 4096 write(1, "ffffffffffffffffffffffffffffffff"..., 4096) = 4096 write(1, "ffffffffffffffffffffffffffffffff"..., 4096) = 4096 write(1, "ffffffffffffffffffffffffffffffff"..., 4096) = 4096 write(1, "ffffffffffffffffffffffffffffffff"..., 4096) = 4096 ...etc...

  Read the article

• Windows Share authentication from Active Directory Linux login

  - by Kenny

  Hi, I'm using Active Directory to log into RHEL. To do this, I followed the steps outlined here: http://www.markwilson.co.uk/blog/2007/05/using-active-directory-to-authenticate-users-on-a-linux-computer.htm I'd like to be able to read data from Windows Servers shared folders without being prompted for a password. On Windows I log into an AD domain, and when I access windows file shares on a server on the LAN (also part of the AD domain) my I can just access them with no authentication step. I've used SMBclient on Linux to access these shares, but it asks for my password. I would like to be able to script access to the data on the shares, but I can't if there's a password prompt in the way. Well, I could, but it's not how I want to do it. Now, since I'm logged in using my active directory username & password, can't I just access the shares without jumping that extra hoop? I know I can mount the share using something like: //192.168.0.5/share /mnt/windows cifs auto,username=steve,password=secret,rw 0 0 but access will depend who is logged in... each user logging in should have their own unique AD access privelages. Thanks for reading!

  Read the article

• Cisco ASA 8.2 ACL For NAT

  - by javano

  Sadly I have gone back in time to ASA 8.2(5)33 which I am not so familiar with. I have configured NAT between two interfaces but traffic isn't passing becasue I can't get the ACL to work; (The full config which isn't very big is here but to keep this post tidy I have just pasted the important parts below); interface Ethernet0/0 switchport access vlan 108 ! interface Ethernet0/6 switchport access vlan 104 ! interface Ethernet0/7 switchport access vlan 105 ! interface Vlan104 description BUILDING2 nameif BUILDING2 security-level 0 ip address 10.104.0.1 255.255.255.0 ! interface Vlan105 description BUILDING1 nameif BUILDING1 security-level 0 ip address 10.105.0.1 255.255.255.0 ! interface Vlan108 description Main LAN VLAN nameif lan security-level 0 ip address 172.22.0.215 255.255.255.0 ! object-group network obj_net_Remote_Hosts network-object host 111.111.111.3 network-object host 111.111.111.65 object-group network obj_host_pc1_eth1 network-object host 10.104.0.111 object-group network obj_host_pc2_eth1 network-object host 10.104.0.112 object-group network obj_host_pc3_eth1 network-object host 10.104.0.106 object-group network obj_host_pc4_eth1 network-object host 10.104.0.107 object-group network obj_net_PCs description IPs of PCs group-object obj_host_pc1_eth1 group-object obj_host_pc2_eth1 group-object obj_host_pc3_eth1 group-object obj_host_pc4_eth1 access-list acl_NAT_pc1_91 extended permit tcp host 10.104.0.111 host 111.111.111.3 eq 8101 access-list acl_Permit_PCs extended permit tcp object-group obj_net_PCs object-group obj_net_Remote_Hosts eq 8101 ! global (BUILDING1) 11 111.111.222.91 netmask 255.255.255.255 nat (BUILDING2) 11 access-list acl_NAT_pc1_91 access-group acl_Permit_PCs in interface BUILDING2 route BUILDING1 111.111.111.3 255.255.255.255 10.105.0.2 1 route BUILDING1 111.111.111.65 255.255.255.255 10.105.0.2 1 When I try and connect from PC1 to ip 111.111.111.3 I see the following error logged on the ASA console; %ASA-2-106001: Inbound TCP connection denied from 10.104.0.111/38495 to 111.111.111.3/8101 flags SYN on interface blades What the duce!

  Read the article

• Firewall for internal networks

  - by Cylindric

  I have a virtualised infrastructure here, with separated networks (some physically, some just by VLAN) for iSCSI traffic, VMware management traffic, production traffic, etc. The recommendations are of course to not allow access from the LAN to the iSCSI network for example, for obvious security and performance reasons, and same between DMZ/LAN, etc. The problem I have is that in reality, some services do need access across the networks from time to time: System monitoring server needs to see the ESX hosts and the SAN for SNMP VSphere guest console access needs direct access to the ESX host the VM is running on VMware Converter wants access to the ESX host the VM will be created on The SAN email notification system wants access to our mail server Rather than wildly opening up the entire network, I'd like to place a firewall spanning these networks, so I can allow just the access required For example: SAN SMTP Server for email Management SAN for monitoring via SNMP Management ESX for monitoring via SNMP Target Server ESX for VMConverter Can someone recommend a free firewall that will allow this kind of thing without too much low-level tinkering of config files? I've used products such as IPcop before, and it seems to be possible to achieve this using that product if I re-purpose their ideas of "WAN", "WLAN" (the red/green/orange/blue interfaces), but was wondering if there were any other accepted products for this sort of thing. Thanks.

  Read the article

• VLAN Through Switch Doesn't Work

  - by vcsjones

  I have the following scenario: I have a Cisco Aironet 1040 access point. I have it configured with two SSIDs, each going to a different VLAN. So: SSID internal : VLAN 90 SSID guest : VLAN 70 On the router side, I have a Cisco RV220W (with the radios now turned off) and have setup VLANs with like VLAN IDs. VLAN 90 : 192.168.90.0/24 VLAN 70 : 192.168.70.0/24 As far as DHCP is concerned, each VLAN has a "DHCP Server" in the router's configuration: So with the access point connected directly to the router, everything works great. I connect to the internal network, and I get a 192.168.90.x address, and the guest network gets a 70.xxx address. Next I introduced a Cisco SG200-50 PoE switch between the router and the access point. The port is configured as a trunk port, so the VLAN tags should go right through the switch back to the router. However, when something is connected to the access point, nothing works. It isn't able to get an IP address, and manually assigning one doesn't seem to let any traffic route. Given that the access point works correctly when connected to the router directly, I believe the switch is misconfigured. What am I missing here? What can I use to better diagnose what the problem might be? It's small business equipment, so CLI access is not available. Below are screenshots of the switch's config. The access point is connected to GE2.

  Read the article

• Windows Server 2008 R2 - VPN Folder Sharing Permissions

  - by daveywc

  I have setup VPN access to my Windows Server 2008 R2 server using RRAS. Clients can connect, run applications, view shares etc. My problem is that one of the applications that they use relies on some network shares. The application is not able to access the shares unless the user first goes into Windows Explorer and accesses the share, providing their user name and password (the same one that they use to connect via the VPN). Previously on a different Windows Server 2008 (not R2) this was not necessary i.e. the application and user could access the share without providing another user name and password. I have tried giving the Everyone group full control over the shared folder - both on the Security tab and in the Permissions area under Advanced Sharing on the Sharing tab. This still did not resolve the issue. (I don't really want to give Everyone access anyway - I was hoping that granting access to a group that the VPN users had membership of would be enough). I have also turned off password protected sharing in the Advanced Sharing Settings area of the Network and Sharing Center (under both Home or Work and Public). So my question is what is preventing my VPN users from having access to these folders without having to re-supply the same login and password that they use to access the VPN? And what is the best practice in this type of scenario?

  Read the article

• squid bypass for a domain

  - by krisdigitx

  i am using squid with adzap, it possible that squid/adzap does not cache for a particluar domain eg. cnn.com this is my squid.conf file # # Recommended minimum configuration: # acl manager proto cache_object acl localhost src 127.0.0.1/32 #acl localhost src ::1/128 acl to_localhost dst 127.0.0.0/8 0.0.0.0/32 #acl to_localhost dst ::1/128 # Example rule allowing access from your local networks. # Adapt to list your (internal) IP networks from where browsing # should be allowed acl localnet src 192.168.1.0/24 acl localnet src 192.168.2.0/24 acl SSL_ports port 443 acl Safe_ports port 80 # http acl Safe_ports port 21 # ftp acl Safe_ports port 443 # https acl Safe_ports port 70 # gopher acl Safe_ports port 210 # wais acl Safe_ports port 1025-65535 # unregistered ports acl Safe_ports port 280 # http-mgmt acl Safe_ports port 488 # gss-http acl Safe_ports port 591 # filemaker acl Safe_ports port 777 # multiling http acl CONNECT method CONNECT # # Recommended minimum Access Permission configuration: # # Only allow cachemgr access from localhost http_access allow manager localhost http_access deny manager # Deny requests to certain unsafe ports http_access deny !Safe_ports # Deny CONNECT to other than secure SSL ports http_access deny CONNECT !SSL_ports # We strongly recommend the following be uncommented to protect innocent # web applications running on the proxy server who think the only # one who can access services on "localhost" is a local user #http_access deny to_localhost # # INSERT YOUR OWN RULE(S) HERE TO ALLOW ACCESS FROM YOUR CLIENTS # # Example rule allowing access from your local networks. # Adapt localnet in the ACL section to list your (internal) IP networks # from where browsing should be allowed http_access allow localnet http_access allow localhost # And finally deny all other access to this proxy http_access deny all # Squid normally listens to port 3128 http_port xxx.xxx.xxx.yyy:3128 transparent visible_hostname proxyserver.local # We recommend you to use at least the following line. hierarchy_stoplist cgi-bin ? # Uncomment and adjust the following to add a disk cache directory. cache_dir ufs /var/spool/squid 1024 16 256 # Leave coredumps in the first cache dir coredump_dir /var/spool/squid # Add any of your own refresh_pattern entries above these. refresh_pattern ^ftp: 1440 20% 10080 refresh_pattern ^gopher: 1440 0% 1440 refresh_pattern -i (/cgi-bin/|\?) 0 0% 0 refresh_pattern . 0 20% 4320 access_log /var/log/squid/squid.log squid access_log syslog squid redirect_program /usr/local/adzap/scripts/wrapzap fixed using acl allow_domains dstdomain www.cnn.com always_direct allow allow_domains

  Read the article

• Custom Domain for Google App Engine and Google Apps

  - by Kevin

  I have set up and configured Google App Engine and Google Apps to use my custom domain with a cname 'www'. I have configured my DNS (via fasthosts.co.uk) with the cname and pointed it to ghs.google.com. I can access the website using the google app engine domain at capel-y-crwys.appspot.com but I can't access it via my custom domain www.capelycrwys.org.uk. I have allowed several days for propagation of the DNS etc. The really strange this is I can access the app via my custom domain when I use the web browser on my Android mobile phone. I can't access the app via my custom domain from my home internet connection, my work internet connection or a friends internet connection. I tried a few online web proxies and I can access the app via the custom domain. I posted this question on the google forums code.google.com/appengine/forum/?place=topic%2Fgoogle-appengine%2FfUP-G_0FKE4%2Fdiscussion and a commentor has said he could access the app via the custom domain. So why can't I access it direct via my home internet connection etc? I've tried loads of google searching and even found a similar sounding post here on serverfault serverfault.com/questions/208461/custom-domain-name-server-not-found-google-app-engine-and-google-apps but it doesn't have an answer that helps me.

  Read the article

• (Windows 7) Shared External Drive Permission Issues

  - by connec

  So, say I share my system (C) drive through windows (E.g. properties -> Sharing -> Advanced Sharing -> Share this Folder). I can then access this drive at \\Comp\C on another networked computer - all is well. However, if I insert a removable (USB) disk, say "E", and proceed to share it the same way, when I attempt to access \\Comp\E (either directly or through browsing) I get an error: Windows cannot access \\Comp\E You do not have permission to access \\Comp\E. Contact your network administrator to request access. Now, the permissions (Advanced Sharing -> Permissions) are set with "Everyone" having read access (same as the internal drive), so this doesn't make a lot of sense. Also of note, I have an SSH server on my computer (through Cygwin) and even through SSH (logging in as an administrator user) I cannot access /cygdrive/e (although /cygdrive/c is accessible). As a final note, the drive is of course accessible on the host machine (E:\), and also at \\Comp\E on the host machine.

  Read the article

• cisco asa + action drop issue

  - by ghp

  Have created a tunnel between 10.x.y.z network and 122.a.b.c ..the tunnel is up and active, but when I try the packet tracer output ..I get the ACTION as drop. I have also enabled same-security-traffic permit intra-interface. Can someone help me what does this drop mean? Result: input-interface: inside input-status: up input-line-status: up output-interface: outside output-status: up output-line-status: up Action: drop Drop-reason: (acl-drop) Flow is denied by configured rule Packet Tracer output @Shane Madden: please find below the packet tracer output. CASA5K-A# CASA5K-A# config t CASA5K-A(config)# packet-tracer input inside tcp 10.x.y.112 0 122.a.b.c 0 Phase: 1 Type: ROUTE-LOOKUP Subtype: input Result: ALLOW Config: Additional Information: in 0.0.0.0 0.0.0.0 outside Phase: 2 Type: ACCESS-LIST Subtype: Result: DROP Config: Implicit Rule Additional Information: Result: input-interface: inside input-status: up input-line-status: up output-interface: outside output-status: up output-line-status: up Action: drop Drop-reason: (acl-drop) Flow is denied by configured rule CASA5K-A(config)# ======================================================================== The access-group are as follows : access-group acl-inbound in interface outside access-group acl-outbound in interface inside and the access-list's are access-list acl-inbound extended permit tcp any any gt 1023 access-list acl-outbound extended permit ip object-group net-Source object net-dest

  Read the article

• Why can't I connect to my home SSH (SFTP) server? What am I doing wrong?

  - by Rolo

  I am new to this topic of creating a SFTP server on one's computer. I would like to be able to access the folder on my Windows XP computer via SFTP from another computer or a phone. The following is what I have done so far: I have installed SSH Windows and everything is setup correctly because I can access it (the folder on my pc) via WinSCP. I however cannot access it from my phone. It doesn't connect. The phone can be on the same wireless network as the Windows XP computer, but I would prefer to be able to access this when not in the same network. Now, from what I have read and understood, the following is the information needed to connect: 1) Host Name: This would be my computer's ip address which I access by typing ipconfig in a cmd prompt (I access this easily on my computer because I simply put in localhost or 127.0.0.1) 2) Port Number: That would be port 22 (I have also added this to my router in the port forwarding section). 3) Username: This would be my Windows XP username. This however is my full name, including my middle initial followed by a period. I am wondering if this is maybe causing problems in accessing it from my phone, since the name has spaces and punctuation (the period). 4) Password: The password of my Windows XP computer Extra Info: When I say phone, I mean an Android phone and I am using an ftp / sftp app to access my pc via the phone's cellular network (I also tried the wireless, but that didn't work as well). I have tried more than one program. On one program it tells me Connection timed out and on another it tells me "timeout:socket is not established" Also, I know that I can use the site noip, but I prefer to connect this way first. Also, because I am new to this, I would like to look into what exactly noip is doing and if they would be seeing my files as they are transferred from phone to pc. Thanking you in advance for your help.

  Read the article

• Shared External Drive Permission Issues

  - by connec

  So, say I share my system (C) drive through windows (E.g. properties -> Sharing -> Advanced Sharing -> Share this Folder). I can then access this drive at \\Comp\C on another networked computer - all is well. However, if I insert a removable (USB) disk, say "E", and proceed to share it the same way, when I attempt to access \\Comp\E (either directly or through browsing) I get an error: Windows cannot access \\Comp\E You do not have permission to access \\Comp\E. Contact your network administrator to request access. Now, the permissions (Advanced Sharing -> Permissions) are set with "Everyone" having read access (same as the internal drive), so this doesn't make a lot of sense. Also of note, I have an SSH server on my computer (through Cygwin) and even through SSH (logging in as an administrator user) I cannot access /cygdrive/e (although /cygdrive/c is accessible). As a final note, the drive is of course accessible on the host machine (E:\), and also at \\Comp\E on the host machine.

  Read the article

• Enable wireless on Dell Inspiron 1300

  - by Simon

  As per subject, I've looked at various resources and attempted ndiswrapper solutions, found a one-click solution that lead to a 404 and this but none works. I've run all updates. Once I managed to lose my wired connection as well and had to reinstall. This is my first hour with Linux. iwconfig gives this before I do anything: lo no wireless extensions. wlan0 IEEE 802.11bg ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=0 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:on eth0 no wireless extens Thanks for responding lspci returns 00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03) Subsystem: Dell Device 01c9 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03) (prog-if 00 [VGA controller]) Subsystem: Dell Device 01c9 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at dff00000 (32-bit, non-prefetchable) [size=512K] Region 1: I/O ports at eff8 [size=8] Region 2: Memory at c0000000 (32-bit, prefetchable) [size=256M] Region 3: Memory at dfec0000 (32-bit, non-prefetchable) [size=256K] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: i915 Kernel modules: intelfb, i915 00:02.1 Display controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03) Subsystem: Dell Device 01c9 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Region 0: Memory at dff80000 (32-bit, non-prefetchable) [size=512K] Capabilities: <access denied> 00:1b.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 03) Subsystem: Dell Device 01c9 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 42 Region 0: Memory at dfebc000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: 30000000-301fffff Prefetchable memory behind bridge: 0000000030200000-00000000303fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.3 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 4 (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=0c, subordinate=0d, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: dfc00000-dfdfffff Prefetchable memory behind bridge: 00000000d0000000-00000000d01fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03) (prog-if 00 [UHCI]) Subsystem: Dell Device 01c9 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at bf80 [size=32] Kernel driver in use: uhci_hcd 00:1d.1 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03) (prog-if 00 [UHCI]) Subsystem: Dell Device 01c9 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 17 Region 4: I/O ports at bf60 [size=32] Kernel driver in use: uhci_hcd 00:1d.2 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03) (prog-if 00 [UHCI]) Subsystem: Dell Device 01c9 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at bf40 [size=32] Kernel driver in use: uhci_hcd 00:1d.3 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03) (prog-if 00 [UHCI]) Subsystem: Dell Device 01c9 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 19 Region 4: I/O ports at bf20 [size=32] Kernel driver in use: uhci_hcd 00:1d.7 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03) (prog-if 20 [EHCI]) Subsystem: Dell Device 01c9 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at b0000000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d3) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=32 I/O behind bridge: 0000f000-00000fff Memory behind bridge: dfb00000-dfbfffff Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 03) Subsystem: Dell Device 01c9 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Kernel modules: iTCO_wdt, intel-rng 00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 03) (prog-if 8a [Master SecP PriP]) Subsystem: Dell Device 01c9 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at bfa0 [size=16] Kernel driver in use: ata_piix 02:00.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02) Subsystem: Dell Device 01c9 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Interrupt: pin A routed to IRQ 18 Region 0: Memory at dfbfc000 (32-bit, non-prefetchable) [size=8K] Capabilities: <access denied> Kernel driver in use: b44 Kernel modules: b44 02:03.0 Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02) Subsystem: Dell Wireless 1370 WLAN Mini-PCI Card Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Interrupt: pin A routed to IRQ 17 Region 0: Memory at dfbfe000 (32-bit, non-prefetchable) [size=8K] Kernel driver in use: b43-pci-bridge Kernel modules: ssb and the rfkill shows 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no Just checking addtional drivers. Says no additional driver installed in this system

  Read the article

• Organization &amp; Architecture UNISA Studies &ndash; Chap 4

  - by MarkPearl

  Learning Outcomes Explain the characteristics of memory systems Describe the memory hierarchy Discuss cache memory principles Discuss issues relevant to cache design Describe the cache organization of the Pentium Computer Memory Systems There are key characteristics of memory… Location – internal or external Capacity – expressed in terms of bytes Unit of Transfer – the number of bits read out of or written into memory at a time Access Method – sequential, direct, random or associative From a users perspective the two most important characteristics of memory are… Capacity Performance – access time, memory cycle time, transfer rate The trade off for memory happens along three axis… Faster access time, greater cost per bit Greater capacity, smaller cost per bit Greater capacity, slower access time This leads to people using a tiered approach in their use of memory   As one goes down the hierarchy, the following occurs… Decreasing cost per bit Increasing capacity Increasing access time Decreasing frequency of access of the memory by the processor The use of two levels of memory to reduce average access time works in principle, but only if conditions 1 to 4 apply. A variety of technologies exist that allow us to accomplish this. Thus it is possible to organize data across the hierarchy such that the percentage of accesses to each successively lower level is substantially less than that of the level above. A portion of main memory can be used as a buffer to hold data temporarily that is to be read out to disk. This is sometimes referred to as a disk cache and improves performance in two ways… Disk writes are clustered. Instead of many small transfers of data, we have a few large transfers of data. This improves disk performance and minimizes processor involvement. Some data designed for write-out may be referenced by a program before the next dump to disk. In that case the data is retrieved rapidly from the software cache rather than slowly from disk. Cache Memory Principles Cache memory is substantially faster than main memory. A caching system works as follows.. When a processor attempts to read a word of memory, a check is made to see if this in in cache memory… If it is, the data is supplied, If it is not in the cache, a block of main memory, consisting of a fixed number of words is loaded to the cache. Because of the phenomenon of locality of references, when a block of data is fetched into the cache, it is likely that there will be future references to that same memory location or to other words in the block. Elements of Cache Design While there are a large number of cache implementations, there are a few basic design elements that serve to classify and differentiate cache architectures… Cache Addresses Cache Size Mapping Function Replacement Algorithm Write Policy Line Size Number of Caches Cache Addresses Almost all non-embedded processors support virtual memory. Virtual memory in essence allows a program to address memory from a logical point of view without needing to worry about the amount of physical memory available. When virtual addresses are used the designer may choose to place the cache between the MMU (memory management unit) and the processor or between the MMU and main memory. The disadvantage of virtual memory is that most virtual memory systems supply each application with the same virtual memory address space (each application sees virtual memory starting at memory address 0), which means the cache memory must be completely flushed with each application context switch or extra bits must be added to each line of the cache to identify which virtual address space the address refers to. Cache Size We would like the size of the cache to be small enough so that the overall average cost per bit is close to that of main memory alone and large enough so that the overall average access time is close to that of the cache alone. Also, larger caches are slightly slower than smaller ones. Mapping Function Because there are fewer cache lines than main memory blocks, an algorithm is needed for mapping main memory blocks into cache lines. The choice of mapping function dictates how the cache is organized. Three techniques can be used… Direct – simplest technique, maps each block of main memory into only one possible cache line Associative – Each main memory block to be loaded into any line of the cache Set Associative – exhibits the strengths of both the direct and associative approaches while reducing their disadvantages For detailed explanations of each approach – read the text book (page 148 – 154) Replacement Algorithm For associative and set associating mapping a replacement algorithm is needed to determine which of the existing blocks in the cache must be replaced by a new block. There are four common approaches… LRU (Least recently used) FIFO (First in first out) LFU (Least frequently used) Random selection Write Policy When a block resident in the cache is to be replaced, there are two cases to consider If no writes to that block have happened in the cache – discard it If a write has occurred, a process needs to be initiated where the changes in the cache are propagated back to the main memory. There are several approaches to achieve this including… Write Through – all writes to the cache are done to the main memory as well at the point of the change Write Back – when a block is replaced, all dirty bits are written back to main memory The problem is complicated when we have multiple caches, there are techniques to accommodate for this but I have not summarized them. Line Size When a block of data is retrieved and placed in the cache, not only the desired word but also some number of adjacent words are retrieved. As the block size increases from very small to larger sizes, the hit ratio will at first increase because of the principle of locality, which states that the data in the vicinity of a referenced word are likely to be referenced in the near future. As the block size increases, more useful data are brought into cache. The hit ratio will begin to decrease as the block becomes even bigger and the probability of using the newly fetched information becomes less than the probability of using the newly fetched information that has to be replaced. Two specific effects come into play… Larger blocks reduce the number of blocks that fit into a cache. Because each block fetch overwrites older cache contents, a small number of blocks results in data being overwritten shortly after they are fetched. As a block becomes larger, each additional word is farther from the requested word and therefore less likely to be needed in the near future. The relationship between block size and hit ratio is complex, and no set approach is judged to be the best in all circumstances.   Pentium 4 and ARM cache organizations The processor core consists of four major components: Fetch/decode unit – fetches program instruction in order from the L2 cache, decodes these into a series of micro-operations, and stores the results in the L2 instruction cache Out-of-order execution logic – Schedules execution of the micro-operations subject to data dependencies and resource availability – thus micro-operations may be scheduled for execution in a different order than they were fetched from the instruction stream. As time permits, this unit schedules speculative execution of micro-operations that may be required in the future Execution units – These units execute micro-operations, fetching the required data from the L1 data cache and temporarily storing results in registers Memory subsystem – This unit includes the L2 and L3 caches and the system bus, which is used to access main memory when the L1 and L2 caches have a cache miss and to access the system I/O resources

  Read the article

• puppet master REST API returns 403 when running under passenger works when master runs from command line

  - by Anadi Misra

  I am using the standard auth.conf provided in puppet install for the puppet master which is running through passenger under Nginx. However for most of the catalog, files and certitifcate request I get a 403 response. ### Authenticated paths - these apply only when the client ### has a valid certificate and is thus authenticated # allow nodes to retrieve their own catalog path ~ ^/catalog/([^/]+)$ method find allow $1 # allow nodes to retrieve their own node definition path ~ ^/node/([^/]+)$ method find allow $1 # allow all nodes to access the certificates services path ~ ^/certificate_revocation_list/ca method find allow * # allow all nodes to store their reports path /report method save allow * # unconditionally allow access to all file services # which means in practice that fileserver.conf will # still be used path /file allow * ### Unauthenticated ACL, for clients for which the current master doesn't ### have a valid certificate; we allow authenticated users, too, because ### there isn't a great harm in letting that request through. # allow access to the master CA path /certificate/ca auth any method find allow * path /certificate/ auth any method find allow * path /certificate_request auth any method find, save allow * path /facts auth any method find, search allow * # this one is not stricly necessary, but it has the merit # of showing the default policy, which is deny everything else path / auth any Puppet master however does not seems to be following this as I get this error on client [amisr1@blramisr195602 ~]$ sudo puppet agent --no-daemonize --verbose --server bangvmpllda02.XXXXX.com [sudo] password for amisr1: Starting Puppet client version 3.0.1 Warning: Unable to fetch my node definition, but the agent run will continue: Warning: Error 403 on SERVER: Forbidden request: XX.XXX.XX.XX(XX.XXX.XX.XX) access to /certificate_revocation_list/ca [find] at :110 Info: Retrieving plugin Error: /File[/var/lib/puppet/lib]: Failed to generate additional resources using 'eval_generate: Error 403 on SERVER: Forbidden request: XX.XXX.XX.XX(XX.XXX.XX.XX) access to /file_metadata/plugins [search] at :110 Error: /File[/var/lib/puppet/lib]: Could not evaluate: Error 403 on SERVER: Forbidden request: XX.XXX.XX.XX(XX.XXX.XX.XX) access to /file_metadata/plugins [find] at :110 Could not retrieve file metadata for puppet://devops.XXXXX.com/plugins: Error 403 on SERVER: Forbidden request: XX.XXX.XX.XX(XX.XXX.XX.XX) access to /file_metadata/plugins [find] at :110 Error: Could not retrieve catalog from remote server: Error 403 on SERVER: Forbidden request: XX.XXX.XX.XX(XX.XXX.XX.XX) access to /catalog/blramisr195602.XXXXX.com [find] at :110 Using cached catalog Error: Could not retrieve catalog; skipping run Error: Could not send report: Error 403 on SERVER: Forbidden request: XX.XXX.XX.XX(XX.XXX.XX.XX) access to /report/blramisr195602.XXXXX.com [save] at :110 and the server logs show XX.XXX.XX.XX - - [10/Dec/2012:14:46:52 +0530] "GET /production/certificate_revocation_list/ca? HTTP/1.1" 403 102 "-" "Ruby" XX.XXX.XX.XX - - [10/Dec/2012:14:46:52 +0530] "GET /production/file_metadatas/plugins?links=manage&recurse=true&&ignore=---+%0A++-+%22.svn%22%0A++-+CVS%0A++-+%22.git%22&checksum_type=md5 HTTP/1.1" 403 95 "-" "Ruby" XX.XXX.XX.XX - - [10/Dec/2012:14:46:52 +0530] "GET /production/file_metadata/plugins? HTTP/1.1" 403 93 "-" "Ruby" XX.XXX.XX.XX - - [10/Dec/2012:14:46:53 +0530] "POST /production/catalog/blramisr195602.XXXXX.com HTTP/1.1" 403 106 "-" "Ruby" XX.XXX.XX.XX - - [10/Dec/2012:14:46:53 +0530] "PUT /production/report/blramisr195602.XXXXX.com HTTP/1.1" 403 105 "-" "Ruby" thefile server conf file is as follows (and goin by what they say on puppet site, It is better to regulate access in auth.conf for reaching file server and then allow file server to server all) [files] path /apps/puppet/files allow * [private] path /apps/puppet/private/%H allow * [modules] allow * I am using server and client version 3 Nginx has been compiled using the following options nginx version: nginx/1.3.9 built by gcc 4.4.6 20120305 (Red Hat 4.4.6-4) (GCC) TLS SNI support enabled configure arguments: --prefix=/apps/nginx --conf-path=/apps/nginx/nginx.conf --pid-path=/apps/nginx/run/nginx.pid --error-log-path=/apps/nginx/logs/error.log --http-log-path=/apps/nginx/logs/access.log --with-http_ssl_module --with-http_gzip_static_module --add-module=/usr/lib/ruby/gems/1.8/gems/passenger-3.0.18/ext/nginx --add-module=/apps/Downloads/nginx/nginx-auth-ldap-master/ and the standard nginx puppet master conf server { ssl on; listen 8140 ssl; server_name _; passenger_enabled on; passenger_set_cgi_param HTTP_X_CLIENT_DN $ssl_client_s_dn; passenger_set_cgi_param HTTP_X_CLIENT_VERIFY $ssl_client_verify; passenger_min_instances 5; access_log logs/puppet_access.log; error_log logs/puppet_error.log; root /apps/nginx/html/rack/public; ssl_certificate /var/lib/puppet/ssl/certs/bangvmpllda02.XXXXXX.com.pem; ssl_certificate_key /var/lib/puppet/ssl/private_keys/bangvmpllda02.XXXXXX.com.pem; ssl_crl /var/lib/puppet/ssl/ca/ca_crl.pem; ssl_client_certificate /var/lib/puppet/ssl/certs/ca.pem; ssl_ciphers SSLv2:-LOW:-EXPORT:RC4+RSA; ssl_prefer_server_ciphers on; ssl_verify_client optional; ssl_verify_depth 1; ssl_session_cache shared:SSL:128m; ssl_session_timeout 5m; } Puppet is picking up the correct settings from the files mentioned because config print command points to /etc/puppet [amisr1@bangvmpllDA02 puppet]$ sudo puppet config print | grep conf async_storeconfigs = false authconfig = /etc/puppet/namespaceauth.conf autosign = /etc/puppet/autosign.conf catalog_cache_terminus = store_configs confdir = /etc/puppet config = /etc/puppet/puppet.conf config_file_name = puppet.conf config_version = "" configprint = all configtimeout = 120 dblocation = /var/lib/puppet/state/clientconfigs.sqlite3 deviceconfig = /etc/puppet/device.conf fileserverconfig = /etc/puppet/fileserver.conf genconfig = false hiera_config = /etc/puppet/hiera.yaml localconfig = /var/lib/puppet/state/localconfig name = config rest_authconfig = /etc/puppet/auth.conf storeconfigs = true storeconfigs_backend = puppetdb tagmap = /etc/puppet/tagmail.conf thin_storeconfigs = false I checked the firewall rules on this VM; 80, 443, 8140, 3000 are allowed. Do I still have to tweak any specifics to auth.conf for getting this to work?

  Read the article

• The broken Promise of the Mobile Web

  - by Rick Strahl

  High end mobile devices have been with us now for almost 7 years and they have utterly transformed the way we access information. Mobile phones and smartphones that have access to the Internet and host smart applications are in the hands of a large percentage of the population of the world. In many places even very remote, cell phones and even smart phones are a common sight. I’ll never forget when I was in India in 2011 I was up in the Southern Indian mountains riding an elephant out of a tiny local village, with an elephant herder in front riding atop of the elephant in front of us. He was dressed in traditional garb with the loin wrap and head cloth/turban as did quite a few of the locals in this small out of the way and not so touristy village. So we’re slowly trundling along in the forest and he’s lazily using his stick to guide the elephant and… 10 minutes in he pulls out his cell phone from his sash and starts texting. In the middle of texting a huge pig jumps out from the side of the trail and he takes a picture running across our path in the jungle! So yeah, mobile technology is very pervasive and it’s reached into even very buried and unexpected parts of this world. Apps are still King Apps currently rule the roost when it comes to mobile devices and the applications that run on them. If there’s something that you need on your mobile device your first step usually is to look for an app, not use your browser. But native app development remains a pain in the butt, with the requirement to have to support 2 or 3 completely separate platforms. There are solutions that try to bridge that gap. Xamarin is on a tear at the moment, providing their cross-device toolkit to build applications using C#. While Xamarin tools are impressive – and also *very* expensive – they only address part of the development madness that is app development. There are still specific device integration isssues, dealing with the different developer programs, security and certificate setups and all that other noise that surrounds app development. There’s also PhoneGap/Cordova which provides a hybrid solution that involves creating local HTML/CSS/JavaScript based applications, and then packaging them to run in a specialized App container that can run on most mobile device platforms using a WebView interface. This allows for using of HTML technology, but it also still requires all the set up, configuration of APIs, security keys and certification and submission and deployment process just like native applications – you actually lose many of the benefits that  Web based apps bring. The big selling point of Cordova is that you get to use HTML have the ability to build your UI once for all platforms and run across all of them – but the rest of the app process remains in place. Apps can be a big pain to create and manage especially when we are talking about specialized or vertical business applications that aren’t geared at the mainstream market and that don’t fit the ‘store’ model. If you’re building a small intra department application you don’t want to deal with multiple device platforms and certification etc. for various public or corporate app stores. That model is simply not a good fit both from the development and deployment perspective. Even for commercial, big ticket apps, HTML as a UI platform offers many advantages over native, from write-once run-anywhere, to remote maintenance, single point of management and failure to having full control over the application as opposed to have the app store overloads censor you. In a lot of ways Web based HTML/CSS/JavaScript applications have so much potential for building better solutions based on existing Web technologies for the very same reasons a lot of content years ago moved off the desktop to the Web. To me the Web as a mobile platform makes perfect sense, but the reality of today’s Mobile Web unfortunately looks a little different… Where’s the Love for the Mobile Web? Yet here we are in the middle of 2014, nearly 7 years after the first iPhone was released and brought the promise of rich interactive information at your fingertips, and yet we still don’t really have a solid mobile Web platform. I know what you’re thinking: “But we have lots of HTML/JavaScript/CSS features that allows us to build nice mobile interfaces”. I agree to a point – it’s actually quite possible to build nice looking, rich and capable Web UI today. We have media queries to deal with varied display sizes, CSS transforms for smooth animations and transitions, tons of CSS improvements in CSS 3 that facilitate rich layout, a host of APIs geared towards mobile device features and lately even a number of JavaScript framework choices that facilitate development of multi-screen apps in a consistent manner. Personally I’ve been working a lot with AngularJs and heavily modified Bootstrap themes to build mobile first UIs and that’s been working very well to provide highly usable and attractive UI for typical mobile business applications. From the pure UI perspective things actually look very good. Not just about the UI But it’s not just about the UI - it’s also about integration with the mobile device. When it comes to putting all those pieces together into what amounts to a consolidated platform to build mobile Web applications, I think we still have a ways to go… there are a lot of missing pieces to make it all work together and integrate with the device more smoothly, and more importantly to make it work uniformly across the majority of devices. I think there are a number of reasons for this. Slow Standards Adoption HTML standards implementations and ratification has been dreadfully slow, and browser vendors all seem to pick and choose different pieces of the technology they implement. The end result is that we have a capable UI platform that’s missing some of the infrastructure pieces to make it whole on mobile devices. There’s lots of potential but what is lacking that final 10% to build truly compelling mobile applications that can compete favorably with native applications. Some of it is the fragmentation of browsers and the slow evolution of the mobile specific HTML APIs. A host of mobile standards exist but many of the standards are in the early review stage and they have been there stuck for long periods of time and seem to move at a glacial pace. Browser vendors seem even slower to implement them, and for good reason – non-ratified standards mean that implementations may change and vendor implementations tend to be experimental and  likely have to be changed later. Neither Vendors or developers are not keen on changing standards. This is the typical chicken and egg scenario, but without some forward momentum from some party we end up stuck in the mud. It seems that either the standards bodies or the vendors need to carry the torch forward and that doesn’t seem to be happening quickly enough. Mobile Device Integration just isn’t good enough Current standards are not far reaching enough to address a number of the use case scenarios necessary for many mobile applications. While not every application needs to have access to all mobile device features, almost every mobile application could benefit from some integration with other parts of the mobile device platform. Integration with GPS, phone, media, messaging, notifications, linking and contacts system are benefits that are unique to mobile applications and could be widely used, but are mostly (with the exception of GPS) inaccessible for Web based applications today. Unfortunately trying to do most of this today only with a mobile Web browser is a losing battle. Aside from PhoneGap/Cordova’s app centric model with its own custom API accessing mobile device features and the token exception of the GeoLocation API, most device integration features are not widely supported by the current crop of mobile browsers. For example there’s no usable messaging API that allows access to SMS or contacts from HTML. Even obvious components like the Media Capture API are only implemented partially by mobile devices. There are alternatives and workarounds for some of these interfaces by using browser specific code, but that’s might ugly and something that I thought we were trying to leave behind with newer browser standards. But it’s not quite working out that way. It’s utterly perplexing to me that mobile standards like Media Capture and Streams, Media Gallery Access, Responsive Images, Messaging API, Contacts Manager API have only minimal or no traction at all today. Keep in mind we’ve had mobile browsers for nearly 7 years now, and yet we still have to think about how to get access to an image from the image gallery or the camera on some devices? Heck Windows Phone IE Mobile just gained the ability to upload images recently in the Windows 8.1 Update – that’s feature that HTML has had for 20 years! These are simple concepts and common problems that should have been solved a long time ago. It’s extremely frustrating to see build 90% of a mobile Web app with relative ease and then hit a brick wall for the remaining 10%, which often can be show stoppers. The remaining 10% have to do with platform integration, browser differences and working around the limitations that browsers and ‘pinned’ applications impose on HTML applications. The maddening part is that these limitations seem arbitrary as they could easily work on all mobile platforms. For example, SMS has a URL Moniker interface that sort of works on Android, works badly with iOS (only works if the address is already in the contact list) and not at all on Windows Phone. There’s no reason this shouldn’t work universally using the same interface – after all all phones have supported SMS since before the year 2000! But, it doesn’t have to be this way Change can happen very quickly. Take the GeoLocation API for example. Geolocation has taken off at the very beginning of the mobile device era and today it works well, provides the necessary security (a big concern for many mobile APIs), and is supported by just about all major mobile and even desktop browsers today. It handles security concerns via prompts to avoid unwanted access which is a model that would work for most other device APIs in a similar fashion. One time approval and occasional re-approval if code changes or caches expire. Simple and only slightly intrusive. It all works well, even though GeoLocation actually has some physical limitations, such as representing the current location when no GPS device is present. Yet this is a solved problem, where other APIs that are conceptually much simpler to implement have failed to gain any traction at all. Technically none of these APIs should be a problem to implement, but it appears that the momentum is just not there. Inadequate Web Application Linking and Activation Another important piece of the puzzle missing is the integration of HTML based Web applications. Today HTML based applications are not first class citizens on mobile operating systems. When talking about HTML based content there’s a big difference between content and applications. Content is great for search engine discovery and plain browser usage. Content is usually accessed intermittently and permanent linking is not so critical for this type of content.  But applications have different needs. Applications need to be started up quickly and must be easily switchable to support a multi-tasking user workflow. Therefore, it’s pretty crucial that mobile Web apps are integrated into the underlying mobile OS and work with the standard task management features. Unfortunately this integration is not as smooth as it should be. It starts with actually trying to find mobile Web applications, to ‘installing’ them onto a phone in an easily accessible manner in a prominent position. The experience of discovering a Mobile Web ‘App’ and making it sticky is by no means as easy or satisfying. Today the way you’d go about this is: Open the browser Search for a Web Site in the browser with your search engine of choice Hope that you find the right site Hope that you actually find a site that works for your mobile device Click on the link and run the app in a fully chrome’d browser instance (read tiny surface area) Pin the app to the home screen (with all the limitations outline above) Hope you pointed at the right URL when you pinned Even for you and me as developers, there are a few steps in there that are painful and annoying, but think about the average user. First figuring out how to search for a specific site or URL? And then pinning the app and hopefully from the right location? You’ve probably lost more than half of your audience at that point. This experience sucks. For developers too this process is painful since app developers can’t control the shortcut creation directly. This problem often gets solved by crazy coding schemes, with annoying pop-ups that try to get people to create shortcuts via fancy animations that are both annoying and add overhead to each and every application that implements this sort of thing differently. And that’s not the end of it - getting the link onto the home screen with an application icon varies quite a bit between browsers. Apple’s non-standard meta tags are prominent and they work with iOS and Android (only more recent versions), but not on Windows Phone. Windows Phone instead requires you to create an actual screen or rather a partial screen be captured for a shortcut in the tile manager. Who had that brilliant idea I wonder? Surprisingly Chrome on recent Android versions seems to actually get it right – icons use pngs, pinning is easy and pinned applications properly behave like standalone apps and retain the browser’s active page state and content. Each of the platforms has a different way to specify icons (WP doesn’t allow you to use an icon image at all), and the most widely used interface in use today is a bunch of Apple specific meta tags that other browsers choose to support. The question is: Why is there no standard implementation for installing shortcuts across mobile platforms using an official format rather than a proprietary one? Then there’s iOS and the crazy way it treats home screen linked URLs using a crazy hybrid format that is neither as capable as a Web app running in Safari nor a WebView hosted application. Moving off the Web ‘app’ link when switching to another app actually causes the browser and preview it to ‘blank out’ the Web application in the Task View (see screenshot on the right). Then, when the ‘app’ is reactivated it ends up completely restarting the browser with the original link. This is crazy behavior that you can’t easily work around. In some situations you might be able to store the application state and restore it using LocalStorage, but for many scenarios that involve complex data sources (like say Google Maps) that’s not a possibility. The only reason for this screwed up behavior I can think of is that it is deliberate to make Web apps a pain in the butt to use and forcing users trough the App Store/PhoneGap/Cordova route. App linking and management is a very basic problem – something that we essentially have solved in every desktop browser – yet on mobile devices where it arguably matters a lot more to have easy access to web content we have to jump through hoops to have even a remotely decent linking/activation experience across browsers. Where’s the Money? It’s not surprising that device home screen integration and Mobile Web support in general is in such dismal shape – the mobile OS vendors benefit financially from App store sales and have little to gain from Web based applications that bypass the App store and the cash cow that it presents. On top of that, platform specific vendor lock-in of both end users and developers who have invested in hardware, apps and consumables is something that mobile platform vendors actually aspire to. Web based interfaces that are cross-platform are the anti-thesis of that and so again it’s no surprise that the mobile Web is on a struggling path. But – that may be changing. More and more we’re seeing operations shifting to services that are subscription based or otherwise collect money for usage, and that may drive more progress into the Web direction in the end . Nothing like the almighty dollar to drive innovation forward. Do we need a Mobile Web App Store? As much as I dislike moderated experiences in today’s massive App Stores, they do at least provide one single place to look for apps for your device. I think we could really use some sort of registry, that could provide something akin to an app store for mobile Web apps, to make it easier to actually find mobile applications. This could take the form of a specialized search engine, or maybe a more formal store/registry like structure. Something like apt-get/chocolatey for Web apps. It could be curated and provide at least some feedback and reviews that might help with the integrity of applications. Coupled to that could be a native application on each platform that would allow searching and browsing of the registry and then also handle installation in the form of providing the home screen linking, plus maybe an initial security configuration that determines what features are allowed access to for the app. I’m not holding my breath. In order for this sort of thing to take off and gain widespread appeal, a lot of coordination would be required. And in order to get enough traction it would have to come from a well known entity – a mobile Web app store from a no name source is unlikely to gain high enough usage numbers to make a difference. In a way this would eliminate some of the freedom of the Web, but of course this would also be an optional search path in addition to the standard open Web search mechanisms to find and access content today. Security Security is a big deal, and one of the perceived reasons why so many IT professionals appear to be willing to go back to the walled garden of deployed apps is that Apps are perceived as safe due to the official review and curation of the App stores. Curated stores are supposed to protect you from malware, illegal and misleading content. It doesn’t always work out that way and all the major vendors have had issues with security and the review process at some time or another. Security is critical, but I also think that Web applications in general pose less of a security threat than native applications, by nature of the sandboxed browser and JavaScript environments. Web applications run externally completely and in the HTML and JavaScript sandboxes, with only a very few controlled APIs allowing access to device specific features. And as discussed earlier – security for any device interaction can be granted the same for mobile applications through a Web browser, as they can for native applications either via explicit policies loaded from the Web, or via prompting as GeoLocation does today. Security is important, but it’s certainly solvable problem for Web applications even those that need to access device hardware. Security shouldn’t be a reason for Web apps to be an equal player in mobile applications. Apps are winning, but haven’t we been here before? So now we’re finding ourselves back in an era of installed app, rather than Web based and managed apps. Only it’s even worse today than with Desktop applications, in that the apps are going through a gatekeeper that charges a toll and censors what you can and can’t do in your apps. Frankly it’s a mystery to me why anybody would buy into this model and why it’s lasted this long when we’ve already been through this process. It’s crazy… It’s really a shame that this regression is happening. We have the technology to make mobile Web apps much more prominent, but yet we’re basically held back by what seems little more than bureaucracy, partisan bickering and self interest of the major parties involved. Back in the day of the desktop it was Internet Explorer’s 98+%  market shareholding back the Web from improvements for many years – now it’s the combined mobile OS market in control of the mobile browsers. If mobile Web apps were allowed to be treated the same as native apps with simple ways to install and run them consistently and persistently, that would go a long way to making mobile applications much more usable and seriously viable alternatives to native apps. But as it is mobile apps have a severe disadvantage in placement and operation. There are a few bright spots in all of this. Mozilla’s FireFoxOs is embracing the Web for it’s mobile OS by essentially building every app out of HTML and JavaScript based content. It supports both packaged and certified package modes (that can be put into the app store), and Open Web apps that are loaded and run completely off the Web and can also cache locally for offline operation using a manifest. Open Web apps are treated as full class citizens in FireFoxOS and run using the same mechanism as installed apps. Unfortunately FireFoxOs is getting a slow start with minimal device support and specifically targeting the low end market. We can hope that this approach will change and catch on with other vendors, but that’s also an uphill battle given the conflict of interest with platform lock in that it represents. Recent versions of Android also seem to be working reasonably well with mobile application integration onto the desktop and activation out of the box. Although it still uses the Apple meta tags to find icons and behavior settings, everything at least works as you would expect – icons to the desktop on pinning, WebView based full screen activation, and reliable application persistence as the browser/app is treated like a real application. Hopefully iOS will at some point provide this same level of rudimentary Web app support. What’s also interesting to me is that Microsoft hasn’t picked up on the obvious need for a solid Web App platform. Being a distant third in the mobile OS war, Microsoft certainly has nothing to lose and everything to gain by using fresh ideas and expanding into areas that the other major vendors are neglecting. But instead Microsoft is trying to beat the market leaders at their own game, fighting on their adversary’s terms instead of taking a new tack. Providing a kick ass mobile Web platform that takes the lead on some of the proposed mobile APIs would be something positive that Microsoft could do to improve its miserable position in the mobile device market. Where are we at with Mobile Web? It sure sounds like I’m really down on the Mobile Web, right? I’ve built a number of mobile apps in the last year and while overall result and response has been very positive to what we were able to accomplish in terms of UI, getting that final 10% that required device integration dialed was an absolute nightmare on every single one of them. Big compromises had to be made and some features were left out or had to be modified for some devices. In two cases we opted to go the Cordova route in order to get the integration we needed, along with the extra pain involved in that process. Unless you’re not integrating with device features and you don’t care deeply about a smooth integration with the mobile desktop, mobile Web development is fraught with frustration. So, yes I’m frustrated! But it’s not for lack of wanting the mobile Web to succeed. I am still a firm believer that we will eventually arrive a much more functional mobile Web platform that allows access to the most common device features in a sensible way. It wouldn't be difficult for device platform vendors to make Web based applications first class citizens on mobile devices. But unfortunately it looks like it will still be some time before this happens. So, what’s your experience building mobile Web apps? Are you finding similar issues? Just giving up on raw Web applications and building PhoneGap apps instead? Completely skipping the Web and going native? Leave a comment for discussion. Resources Rick Strahl on DotNet Rocks talking about Mobile Web© Rick Strahl, West Wind Technologies, 2005-2014Posted in HTML5  Mobile   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

  Read the article

• Securing an ADF Application using OES11g: Part 2

  - by user12587121

  To validate the integration with OES we need a sample ADF Application that is rich enough to allow us to test securing the various ADF elements.  To achieve this we can add some items including bounded task flows to the application developed in this tutorial. A sample JDeveloper 11.1.1.6 project is available here. It depends on the Fusion Order Demo (FOD) database schema which is easily created using the FOD build scripts.In the deployment we have chosen to enable only ADF Authentication as we will delegate Authorization, mostly, to OES.The welcome page of the application with all the links exposed looks as follows: The Welcome, Browse Products, Browse Stock and System Administration links go to pages while the Supplier Registration and Update Stock are bounded task flows.  The Login link goes to a basic login page and once logged in a link is presented that goes to a logout page.  Only the Browse Products and Browse Stock pages are really connected to the database--the other pages and task flows do not really perform any operations on the database. Required Security Policies We make use of a set of test users and roles as decscribed on the welcome page of the application.  In order to exercise the different authorization possibilities we would like to enforce the following sample policies: Anonymous users can see the Login, Welcome and Supplier Registration links. They can also see the Welcome page, the Login page and follow the Supplier Registration task flow.  They can see the icon adjacent to the Login link indicating whether they have logged in or not. Authenticated users can see the Browse Product page. Only staff granted the right can see the Browse Product page cost price value returned from the database and then only if the value is below a configurable limit. Suppliers and staff can see the Browse Stock links and pages.  Customers cannot. Suppliers can see the Update Stock link but only those with the update permission are allowed to follow the task flow that it launches.  We could hide the link but leave it exposed here so we can easily demonstrate the method call activity protecting the task flow. Only staff granted the right can see the System Administration link and the System Administration page it accesses. Implementing the required policies In order to secure the application we will make use of the following techniques: EL Expressions and Java backing beans: JSF has the notion of EL expressions to reference data from backing Java classes.  We use these to control the presentation of links on the navigation page which respect the security contraints.  So a user will not see links that he is not allowed to click on into. These Java backing beans can call on to OES for an authorization decision.  Important Note: naturally we would configure the WLS domain where our ADF application is running as an OES WLS SM, which would allow us to efficiently query OES over the PEP API.  However versioning conflicts between OES 11.1.1.5 and ADF 11.1.1.6 mean that this is not possible.  Nevertheless, we can make use of the OES RESTful gateway technique from this posting in order to call into OES. You can easily create and manage backing beans in Jdeveloper as follows: Custom ADF Phase Listener: ADF extends the JSF page lifecycle flow and allows one to hook into the flow to intercept page rendering.  We use this to put a check prior to rendering any protected pages, again calling on to OES via the backing bean.  Phase listeners are configured in the adf-settings.xml file.  See the MyPageListener.java class in the project.  Here, for example,  is the code we use in the listener to check for allowed access to the sysadmin page, navigating back to the welcome page if authorization is not granted:                         if (page != null && (page.equals("/system.jspx") || page.equals("/system"))){                             System.out.println("MyPageListener: Checking Authorization for /system");                             if (getValue("#{oesBackingBean.UIAccessSysAdmin}").toString().equals("false") ){                                   System.out.println("MyPageListener: Forcing navigation away from system" +                                       "to welcome");                                 NavigationHandler nh = fc.getApplication().getNavigationHandler();                                   nh.handleNavigation(fc, null, "welcome");                               } else {                                 System.out.println("MyPageListener: access allowed");                              }                         } Method call activity: our app makes use of bounded task flows to implement the sequence of pages that update the stock or allow suppliers to self register.  ADF takes care of ensuring that a bounded task flow can be entered by only one page.  So a way to protect all those pages is to make a call to OES in the first activity and then either exit the task flow or continue depending on the authorization decision.  The method call returns a String which contains the name of the transition to effect. This is where we configure the method call activity in JDeveloper: We implement each of the policies using the above techniques as follows: Policies 1 and 2: as these policies concern the coarse grained notions of controlling access to anonymous and authenticated users we can make use of the container’s security constraints which can be defined in the web.xml file.  The allPages constraint is added automatically when we configure Authentication for the ADF application.  We have added the “anonymousss” constraint to allow access to the the required pages, task flows and icons: <security-constraint>    <web-resource-collection>      <web-resource-name>anonymousss</web-resource-name>      <url-pattern>/faces/welcome</url-pattern>      <url-pattern>/afr/*</url-pattern>      <url-pattern>/adf/*</url-pattern>      <url-pattern>/key.png</url-pattern>      <url-pattern>/faces/supplier-reg-btf/*</url-pattern>      <url-pattern>/faces/supplier_register_complete</url-pattern>    </web-resource-collection>  </security-constraint> Policy 3: we can place an EL expression on the element representing the cost price on the products.jspx page: #{oesBackingBean.dataAccessCostPrice}. This EL Expression references a method in a Java backing bean that will call on to OES for an authorization decision.  In OES we model the authorization requirement by requiring the view permission on the resource /MyADFApp/data/costprice and granting it only to the staff application role.  We recover any obligations to determine the limit.  Policy 4: is implemented by putting an EL expression on the Browse Stock link #{oesBackingBean.UIAccessBrowseStock} which checks for the view permission on the /MyADFApp/ui/stock resource. The stock.jspx page is protected by checking for the same permission in a custom phase listener—if the required permission is not satisfied then we force navigation back to the welcome page. Policy 5: the Update Stock link is protected with the same EL expression as the Browse Link: #{oesBackingBean.UIAccessBrowseStock}.  However the Update Stock link launches a bounded task flow and to protect it the first activity in the flow is a method call activity which will execute an EL expression #{oesBackingBean.isUIAccessSupplierUpdateTransition}  to check for the update permission on the /MyADFApp/ui/stock resource and either transition to the next step in the flow or terminate the flow with an authorization error. Policy 6: the System Administration link is protected with an EL Expression #{oesBackingBean.UIAccessSysAdmin} that checks for view access on the /MyADF/ui/sysadmin resource.  The system page is protected in the same way at the stock page—the custom phase listener checks for the same permission that protects the link and if not satisfied we navigate back to the welcome page. Testing the Application To test the application: deploy the OES11g Admin to a WLS domain deploy the OES gateway in a another domain configured to be a WLS SM. You must ensure that the jps-config.xml file therein is configured to allow access to the identity store, otherwise the gateway will not b eable to resolve the principals for the requested users.  To do this ensure that the following elements appear in the jps-config.xml file: <serviceProvider type="IDENTITY_STORE" name="idstore.ldap.provider" class="oracle.security.jps.internal.idstore.ldap.LdapIdentityStoreProvider">             <description>LDAP-based IdentityStore Provider</description>  </serviceProvider> <serviceInstance name="idstore.ldap" provider="idstore.ldap.provider">             <property name="idstore.config.provider" value="oracle.security.jps.wls.internal.idstore.WlsLdapIdStoreConfigProvider"/>             <property name="CONNECTION_POOL_CLASS" value="oracle.security.idm.providers.stdldap.JNDIPool"/></serviceInstance> <serviceInstanceRef ref="idstore.ldap"/> download the sample application and change the URL to the gateway in the MyADFApp OESBackingBean code to point to the OES Gateway and deploy the application to an 11.1.1.6 WLS domain that has been extended with the ADF JRF files. You will need to configure the FOD database connection to point your database which contains the FOD schema. populate the OES Admin and OES Gateway WLS LDAP stores with the sample set of users and groups.  If  you have configured the WLS domains to point to the same LDAP then it would only have to be done once.  To help with this there is a directory called ldap_scripts in the sample project with ldif files for the test users and groups. start the OES Admin console and configure the required OES authorization policies for the MyADFApp application and push them to the WLS SM containing the OES Gateway. Login to the MyADFApp as each of the users described on the login page to test that the security policy is correct. You will see informative logging from the OES Gateway and the ADF application to their respective WLS consoles. Congratulations, you may now login to the OES Admin console and change policies that will control the behaviour of your ADF application--change the limit value in the obligation for the cost price for example, or define Role Mapping policies to determine staff access to the system administration page based on user profile attributes. ADF Development Notes Some notes on ADF development which are probably typical gotchas: May need this on WLS startup in order to allow us to overwrite credentials for the database, the signal here is that there is an error trying to access the data base: -Djps.app.credential.overwrite.allowed=true Best to call Bounded Task flows via a CommandLink (as opposed to a go link) as you cannot seem to start them again from a go link, even having completed the task flow correctly with a return activity. Once a bounded task flow (BTF) is initated it must complete correctly  via a return activity—attempting to click on any other link whilst in the context of a  BTF has no effect.  See here for example: When using the ADF Authentication only security approach it seems to be awkward to allow anonymous access to the welcome and registration pages.  We can achieve anonymous access using the web.xml security constraint shown above (where no auth-constraint is specified) however it is not clear what needs to be listed in there….for example the /afr/* and /adf/* are in there by trial and error as sometimes the welcome page will not render if we omit those items.  I was not able to use the default allPages constraint with for example the anonymous-role or the everyone WLS group in order to be able to allow anonymous access to pages. The ADF security best practice advises placing all pages under the public_html/WEB-INF folder as then ADF will not allow any direct access to the .jspx pages but will only allow acces via a link of the form /faces/welcome rather than /faces/welcome.jspx.  This seems like a very good practice to follow as having multiple entry points to data is a source of confusion in a web application (particulary from a security point of view). In Authentication+Authorization mode only pages with a Page definition file are protected.  In order to add an emty one right click on the page and choose Go to Page Definition.  This will create an empty page definition and now the page will require explicit permission to be seen. It is advisable to give a unique context root via the weblogic.xml for the application, as otherwise the application will clash with any other application with the same context root and it will not deploy

  Read the article

• Office 2010: It&rsquo;s not just DOC(X) and XLS(X)

  - by andrewbrust

  Office 2010 has released to manufacturing.  The bits have left the (product team’s) building.  Will you upgrade? This version of Office is officially numbered 14, a designation that correlates with the various releases, through the years, of Microsoft Word.  There were six major versions of Word for DOS, during whose release cycles came three 16-bit Windows versions.  Then, starting with Word 95 and counting through Word 2007, there have been six more versions – all for the 32-bit Windows platform.  Skip version 13 to ward off folksy bad luck (and, perhaps, the bugs that could come with it) and that brings us to version 14, which includes implementations for both 32- and 64-bit Windows platforms.  We’ve come a long way baby.  Or have we? As it does every three years or so, debate will now start to rage on over whether we need a “14th” version the PC platform’s standard word processor, or a “13th” version of the spreadsheet.  If you accept the premise of that question, then you may be on a slippery slope toward answering it in the negative.  Thing is, that premise is valid for certain customers and not others. The Microsoft Office product has morphed from one that offered core word processing, spreadsheet, presentation and email functionality to a suite of applications that provides unique, new value-added features, and even whole applications, in the context of those core services.  The core apps thus grow in mission: Excel is a BI tool.  Word is a collaborative editorial system for the production of publications.  PowerPoint is a media production platform for for live presentations and, increasingly, for delivering more effective presentations online.  Outlook is a time and task management system.  Access is a rich client front-end for data-driven self-service SharePoint applications.  OneNote helps you capture ideas, corral random thoughts in a semi-structured way, and then tie them back to other, more rigidly structured, Office documents. Google Docs and other cloud productivity platforms like Zoho don’t really do these things.  And there is a growing chorus of voices who say that they shouldn’t, because those ancillary capabilities are over-engineered, over-produced and “under-necessary.”  They might say Microsoft is layering on superfluous capabilities to avoid admitting that Office’s core capabilities, the ones people really need, have become commoditized. It’s hard to take sides in that argument, because different people, and the different companies that employ them, have different needs.  For my own needs, it all comes down to three basic questions: will the new version of Office save me time, will it make the mundane parts of my job easier, and will it augment my services to customers?  I need my time back.  I need to spend more of it with my family, and more of it focusing on my own core capabilities rather than the administrative tasks around them.  And I also need my customers to be able to get more value out of the services I provide. Help me triage my inbox, help me get proposals done more quickly and make them easier to read.  Let me get my presentations done faster, make them more effective and make it easier for me to reuse materials from other presentations.  And, since I’m in the BI and data business, help me and my customers manage data and analytics more easily, both on the desktop and online. Those are my criteria.  And, with those in mind, Office 2010 is looking like a worthwhile upgrade.  Perhaps it’s not earth-shattering, but it offers a combination of incremental improvements and a few new major capabilities that I think are quite compelling.  I provide a brief roundup of them here.  It’s admittedly arbitrary and not comprehensive, but I think it tells the Office 2010 story effectively. Across the Suite More than any other, this release of Office aims to give collaboration a real workout.  In certain apps, for the first time, documents can be opened simultaneously by multiple users, with colleagues’ changes appearing in near real-time.  Web-browser-based versions of Word, Excel, PowerPoint and OneNote will be available to extend collaboration to contributors who are off the corporate network. The ribbon user interface is now more pervasive (for example, it appears in OneNote and in Outlook’s main window).  It’s also customizable, allowing users to add, easily, buttons and options of their choosing, into new tabs, or into new groups within existing tabs. Microsoft has also taken the File menu (which was the “Office Button” menu in the 2007 release) and made it into a full-screen “Backstage” view where document-wide operations, like saving, printing and online publishing are performed. And because, more and more, heavily formatted content is cut and pasted between documents and applications, Office 2010 makes it easier to manage the retention or jettisoning of that formatting right as the paste operation is performed.  That’s much nicer than stripping it off, or adding it back, afterwards. And, speaking of pasting, a number of Office apps now make it especially easy to insert screenshots within their documents.  I know that’s useful to me, because I often document or critique applications and need to show them in action.  For the vast majority of users, I expect that this feature will be more useful for capturing snapshots of Web pages, but we’ll have to see whether this feature becomes popular.   Excel At first glance, Excel 2010 looks and acts nearly identically to the 2007 version.  But additional glances are necessary.  It’s important to understand that lots of people in the working world use Excel as more of a database, analytics and mathematical modeling tool than merely as a spreadsheet.  And it’s also important to understand that Excel wasn’t designed to handle such workloads past a certain scale.  That all changes with this release. The first reason things change is that Excel has been tuned for performance.  It’s been optimized for multi-threaded operation; previously lengthy processes have been shortened, especially for large data sets; more rows and columns are allowed and, for the first time, Excel (and the rest of Office) is available in a 64-bit version.  For Excel, this means users can take advantage of more than the 2GB of memory that the 32-bit version is limited to. On the analysis side, Excel 2010 adds Sparklines (tiny charts that fit into a single cell and can therefore be presented down an entire column or across a row) and Slicers (a more user-friendly filter mechanism for PivotTables and charts, which visually indicates what the filtered state of a given data member is).  But most important, Excel 2010 supports the new PowerPIvot add-in which brings true self-service BI to Office.  PowerPivot allows users to import data from almost anywhere, model it, and then analyze it.  Rather than forcing users to build “spreadmarts” or use corporate-built data warehouses, PowerPivot models function as true columnar, in-memory OLAP cubes that can accommodate millions of rows of data and deliver fast drill-down performance. And speaking of OLAP, Excel 2010 now supports an important Analysis Services OLAP feature called write-back.  Write-back is especially useful in financial forecasting scenarios for which Excel is the natural home.  Support for write-back is long overdue, but I’m still glad it’s there, because I had almost given up on it.   PowerPoint This version of PowerPoint marks its progression from a presentation tool to a video and photo editing and production tool.  Whether or not it’s successful in this pursuit, and if offering this is even a sensible goal, is another question. Regardless, the new capabilities are kind of interesting.  A greatly enhanced set of slide transitions with 3D effects; in-product photo and video editing; accommodation of embedded videos from services such as YouTube; and the ability to save a presentation as a video each lay testimony to PowerPoint’s transformation into a media tool and away from a pure presentation tool. These capabilities also recognize the importance of the Web as both a source for materials and a channel for disseminating PowerPoint output. Congruent with that is PowerPoint’s new ability to broadcast a slide presentation, using a quickly-generated public URL, without involving the hassle or expense of a Web meeting service like GoToMeeting or Microsoft’s own LiveMeeting.  Slides presented through this broadcast feature retain full color fidelity and transitions and animations are preserved as well.   Outlook Microsoft’s ubiquitous email/calendar/contact/task management tool gains long overdue speed improvements, especially against POP3 email accounts.  Outlook 2010 also supports multiple Exchange accounts, rather than just one; tighter integration with OneNote; and a new Social Connector providing integration with, and presence information from, online social network services like LinkedIn and Facebook (not to mention Windows Live).  A revamped conversation view now includes messages that are part of a given thread regardless of which folder they may be stored in. I don’t know yet how well the Social Connector will work or whether it will keep Outlook relevant to those who live on Facebook and LinkedIn.  But among the other features, there’s very little not to like.   OneNote To me, OneNote is the part of Office that just keeps getting better.  There is one major caveat to this, which I’ll cover in a moment, but let’s first catalog what new stuff OneNote 2010 brings.  The best part of OneNote, is the way each of its versions have managed hierarchy: Notebooks have sections, sections have pages, pages have sub pages, multiple notes can be contained in either, and each note supports infinite levels of indentation.  None of that is new to 2010, but the new version does make creation of pages and subpages easier and also makes simple work out of promoting and demoting pages from sub page to full page status.  And relationships between pages are quite easy to create now: much like a Wiki, simply typing a page’s name in double-square-brackets (“[[…]]”) creates a link to it. OneNote is also great at integrating content outside of its notebooks.  With a new Dock to Desktop feature, OneNote becomes aware of what window is displayed in the rest of the screen and, if it’s an Office document or a Web page, links the notes you’re typing, at the time, to it.  A single click from your notes later on will bring that same document or Web page back on-screen.  Embedding content from Web pages and elsewhere is also easier.  Using OneNote’s Windows Key+S combination to grab part of the screen now allows you to specify the destination of that bitmap instead of automatically creating a new note in the Unfiled Notes area.  Using the Send to OneNote buttons in Internet Explorer and Outlook result in the same choice. Collaboration gets better too.  Real-time multi-author editing is better accommodated and determining author lineage of particular changes is easily carried out. My one pet peeve with OneNote is the difficulty using it when I’m not one a Windows PC.  OneNote’s main competitor, Evernote, while I believe inferior in terms of features, has client versions for PC, Mac, Windows Mobile, Android, iPhone, iPad and Web browsers.  Since I have an Android phone and an iPad, I am practically forced to use it.  However, the OneNote Web app should help here, as should a forthcoming version of OneNote for Windows Phone 7.  In the mean time, it turns out that using OneNote’s Email Page ribbon button lets you move a OneNote page easily into EverNote (since every EverNote account gets a unique email address for adding notes) and that Evernote’s Email function combined with Outlook’s Send to OneNote button (in the Move group of the ribbon’s Home tab) can achieve the reverse.   Access To me, the big change in Access 2007 was its tight integration with SharePoint lists.  Access 2010 and SharePoint 2010 continue this integration with the introduction of SharePoint’s Access Services.  Much as Excel Services provides a SharePoint-hosted experience for viewing (and now editing) Excel spreadsheet, PivotTable and chart content, Access Services allows for SharePoint browser-hosted editing of Access data within the forms that are built in the Access client itself. To me this makes all kinds of sense.  Although it does beg the question of where to draw the line between Access, InfoPath, SharePoint list maintenance and SharePoint 2010’s new Business Connectivity Services.  Each of these tools provide overlapping data entry and data maintenance functionality. But if you do prefer Access, then you’ll like  things like templates and application parts that make it easier to get off the blank page.  These features help you quickly get tables, forms and reports built out.  To make things look nice, Access even gets its own version of Excel’s Conditional Formatting feature, letting you add data bars and data-driven text formatting.   Word As I said at the beginning of this post, upgrades to Office are about much more than enhancing the suite’s flagship word processing application. So are there any enhancements in Word worth mentioning?  I think so.  The most important one has to be the collaboration features.  Essentially, when a user opens a Word document that is in a SharePoint document library (or Windows Live SkyDrive folder), rather than the whole document being locked, Word has the ability to observe more granular locks on the individual paragraphs being edited.  Word also shows you who’s editing what and its Save function morphs into a sync feature that both saves your changes and loads those made by anyone editing the document concurrently. There’s also a new navigation pane that lets you manage sections in your document in much the same way as you manage slides in a PowerPoint deck.  Using the navigation pane, you can reorder sections, insert new ones, or promote and demote sections in the outline hierarchy.  Not earth shattering, but nice.   Other Apps and Summarized Findings What about InfoPath, Publisher, Visio and Project?  I haven’t looked at them yet.  And for this post, I think that’s fine.  While those apps (and, arguably, Access) cater to specific tasks, I think the apps we’ve looked at in this post service the general purpose needs of most users.  And the theme in those 2010 apps is clear: collaboration is key, the Web and productivity are indivisible, and making data and analytics into a self-service amenity is the way to go.  But perhaps most of all, features are still important, as long as they get you through your day faster, rather than adding complexity for its own sake.  I would argue that this is true for just about every product Microsoft makes: users want utility, not complexity.

  Read the article

• vCenter appliance won't use mail relay server

  - by Safado

  tl;dr: - sendmail is configured to use a relay server but still insists on using 127.0.01 as the relay, which results in mail not being sent. We have the open source vCenter appliance (v 5.0) managing our ESXi cluster. When connected to it via vSphere Client, you can configure the SMTP relay server to use by going to Administration > vCenter Server Settings > MAIL. There you can set the SMTP Server value. I looked through their documentation and also confirmed on the phone with support that all you have to do to configure mail is to put in the relay IP or fqdn in that box and hit OK. Well, I had done that and mail still wasn't sending. So I SSH into the server (which is SuSE) and look at /var/log/mail and it looks like it's trying to relay the email through 127.0.0.1 and it's rejecting it. So looking through the config files, I see there's /etc/sendmail.cf and /etc/mail/submit.cf. You can configure items in /etc/sysconfig/sendmail and run SuSEconfig --module sendmail to generate those to .cf files based on what's in /etc/sysconfig/sendmail. So playing around, I see that when you set the SMTP Server value in the vCenter gui, all that it does is change the "DS" line in /etc/mail/submit.cf to have DS[myrelayserver.com]. Looking on the internet, it would appear that the DS line is really the only thing you need to change in order to use a relay server. I got on the phone with VMWare support and spent 2 hours trying to modify ANY setting that had anything to do with relays and we couldn't get it to NOT use 127.0.0.1 as the relay. Just to note, any time we made any sort of configuration change, we restarted the sendmail service. Does anyone know whats going on? Have any ideas on how I can fix this?

  Read the article

• SBS 2008 BPA Warnings After Migration From SBS 2003

  - by Nicholas Piasecki

  We just finished a we-know-just-enough-to-be-dangerous migration from SBS 2003 to SBS 2008, and things seem to have gone relatively smoothly. After running the SBS 2008 Best Practices Analyzer on the destination server, we've got three warning messages, and I can't tell if they're important or not. First, the easy one: SMTP Port (TCP 25 Status): The Edgetransport.exe process should listen on SMTP port 25, but that port is owned by the process. I don't think that this one is a big deal--e-mail is flowing through the SMTP connector. Since there are two spaces between "the" and "process," I'm assuming that for some reason BPA just couldn't figure out the owning process name and this is just some sloppy programming when displaying the message. (Indeed, on subsequent runs of the BPA this message goes away, and other times it comes back.) Now, two more scary sounding ones: No DNS name server records: There are no DNS name server (NS) resource records in the _msdcs sub-domain in the forward lookup zone for Windows SBS 2008. and, similarly, No DNS name server records: There are no DNS name server (NS) resource records in the _msdcs zone for Windows SBS 2008. Now for these two, everything appears to be functioning correctly--but I'm assuming this is a weird state as a result of the SBS 2003 to 2008 migration. Can anyone provide any pointers on how to fix it, or whether or not it can be safely ignored? Thanks!

  Read the article

• saslauthd + PostFix producing password verification and authentication errors

  - by Aram Papazian

  So I'm trying to setup PostFix while using SASL (Cyrus variety preferred, I was using dovecot earlier but I'm switching from dovecot to courier so I want to use cyrus instead of dovecot) but I seem to be having issues. Here are the errors I'm receiving: ==> mail.log <== Aug 10 05:11:49 crazyinsanoman postfix/smtpd[779]: warning: SASL authentication failure: Password verification failed Aug 10 05:11:49 crazyinsanoman postfix/smtpd[779]: warning: ipname[xx.xx.xx.xx]: SASL PLAIN authentication failed: authentication failure ==> mail.info <== Aug 10 05:11:49 crazyinsanoman postfix/smtpd[779]: warning: SASL authentication failure: Password verification failed Aug 10 05:11:49 crazyinsanoman postfix/smtpd[779]: warning: ipname[xx.xx.xx.xx]: SASL PLAIN authentication failed: authentication failure ==> mail.warn <== Aug 10 05:11:49 crazyinsanoman postfix/smtpd[779]: warning: SASL authentication failure: Password verification failed Aug 10 05:11:49 crazyinsanoman postfix/smtpd[779]: warning: ipname[xx.xx.xx.xx]: SASL PLAIN authentication failed: authentication failure I tried $testsaslauthd -u xxxx -p xxxx 0: OK "Success." So I know that the password/user I'm using is correct. I'm thinking that most likely I have a setting wrong somewhere, but can't seem to find where. Here is my files. Here is my main.cf for postfix: # See /usr/share/postfix/main.cf.dist for a commented, more complete version # Debian specific: Specifying a file name will cause the first # line of that file to be used as the name. The Debian default # is /etc/mailname. myorigin = /etc/mailname # This is already done in /etc/mailname #myhostname = crazyinsanoman.xxxxx.com smtpd_banner = $myhostname ESMTP $mail_name #biff = no # appending .domain is the MUA's job. #append_dot_mydomain = no readme_directory = /usr/share/doc/postfix # TLS parameters smtpd_tls_cert_file = /etc/postfix/smtpd.cert smtpd_tls_key_file = /etc/postfix/smtpd.key smtpd_use_tls = yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache # Relay smtp through another server or leave blank to do it yourself #relayhost = smtp.yourisp.com # Network details; Accept connections from anywhere, and only trust this machine mynetworks = 127.0.0.0/8 inet_interfaces = all #mynetworks_style = host #As we will be using virtual domains, these need to be empty local_recipient_maps = mydestination = # how long if undelivered before sending "delayed mail" warning update to sender delay_warning_time = 4h # will it be a permanent error or temporary unknown_local_recipient_reject_code = 450 # how long to keep message on queue before return as failed. # some have 3 days, I have 16 days as I am backup server for some people # whom go on holiday with their server switched off. maximal_queue_lifetime = 7d # max and min time in seconds between retries if connection failed minimal_backoff_time = 1000s maximal_backoff_time = 8000s # how long to wait when servers connect before receiving rest of data smtp_helo_timeout = 60s # how many address can be used in one message. # effective stopper to mass spammers, accidental copy in whole address list # but may restrict intentional mail shots. smtpd_recipient_limit = 16 # how many error before back off. smtpd_soft_error_limit = 3 # how many max errors before blocking it. smtpd_hard_error_limit = 12 # Requirements for the HELO statement smtpd_helo_restrictions = permit_mynetworks, warn_if_reject reject_non_fqdn_hostname, reject_invalid_hostname, permit # Requirements for the sender details smtpd_sender_restrictions = permit_mynetworks, warn_if_reject reject_non_fqdn_sender, reject_unknown_sender_domain, reject_unauth_pipelining, permit # Requirements for the connecting server smtpd_client_restrictions = reject_rbl_client sbl.spamhaus.org, reject_rbl_client blackholes.easynet.nl, reject_rbl_client dnsbl.njabl.org # Requirement for the recipient address smtpd_recipient_restrictions = reject_unauth_pipelining, permit_mynetworks, reject_non_fqdn_recipient, reject_unknown_recipient_domain, reject_unauth_destination, permit smtpd_data_restrictions = reject_unauth_pipelining # require proper helo at connections smtpd_helo_required = yes # waste spammers time before rejecting them smtpd_delay_reject = yes disable_vrfy_command = yes # not sure of the difference of the next two # but they are needed for local aliasing alias_maps = hash:/etc/postfix/aliases alias_database = hash:/etc/postfix/aliases # this specifies where the virtual mailbox folders will be located virtual_mailbox_base = /var/spool/mail/vmail # this is for the mailbox location for each user virtual_mailbox_maps = mysql:/etc/postfix/mysql_mailbox.cf # and this is for aliases virtual_alias_maps = mysql:/etc/postfix/mysql_alias.cf # and this is for domain lookups virtual_mailbox_domains = mysql:/etc/postfix/mysql_domains.cf # this is how to connect to the domains (all virtual, but the option is there) # not used yet # transport_maps = mysql:/etc/postfix/mysql_transport.cf # Setup the uid/gid of the owner of the mail files - static:5000 allows virtual ones virtual_uid_maps = static:5000 virtual_gid_maps = static:5000 inet_protocols=all # Cyrus SASL Support smtpd_sasl_path = smtpd smtpd_sasl_local_domain = xxxxx.com ####################### ## OLD CONFIGURATION ## ####################### #myorigin = /etc/mailname #mydestination = crazyinsanoman.xxxxx.com, localhost, localhost.localdomain #mailbox_size_limit = 0 #recipient_delimiter = + #html_directory = /usr/share/doc/postfix/html message_size_limit = 30720000 #virtual_alias_domains = ##virtual_alias_maps = hash:/etc/postfix/virtual #virtual_mailbox_base = /home/vmail ##luser_relay = webmaster #smtpd_sasl_type = dovecot #smtpd_sasl_path = private/auth smtpd_sasl_auth_enable = yes smtpd_sasl_security_options = noanonymous broken_sasl_auth_clients = yes #smtpd_sasl_authenticated_header = yes smtpd_recipient_restrictions = permit_mynetworks, permit_sasl_authenticated, reject_unauth_destination #virtual_create_maildirsize = yes #virtual_maildir_extended = yes #proxy_read_maps = $local_recipient_maps $mydestination $virtual_alias_maps $virtual_alias_domains $virtual_mailbox_maps $virtual_mailbox_domains $relay_recipient_maps $relay_domains $canonical_maps $sender_canonical_maps $recipient_canonical_maps $relocated_maps $transport_maps $mynetworks $virtual_mailbox_limit_maps #virtual_transport = dovecot #dovecot_destination_recipient_limit = 1 Here is my master.cf: # # Postfix master process configuration file. For details on the format # of the file, see the master(5) manual page (command: "man 5 master"). # # Do not forget to execute "postfix reload" after editing this file. # # ========================================================================== # service type private unpriv chroot wakeup maxproc command + args # (yes) (yes) (yes) (never) (100) # ========================================================================== smtp inet n - - - - smtpd submission inet n - - - - smtpd -o smtpd_tls_security_level=encrypt -o smtpd_sasl_auth_enable=yes -o smtpd_client_restrictions=permit_sasl_authenticated,reject # -o milter_macro_daemon_name=ORIGINATING #smtps inet n - - - - smtpd # -o smtpd_tls_wrappermode=yes # -o smtpd_sasl_auth_enable=yes # -o smtpd_client_restrictions=permit_sasl_authenticated,reject # -o milter_macro_daemon_name=ORIGINATING #628 inet n - - - - qmqpd pickup fifo n - - 60 1 pickup cleanup unix n - - - 0 cleanup qmgr fifo n - n 300 1 qmgr #qmgr fifo n - - 300 1 oqmgr tlsmgr unix - - - 1000? 1 tlsmgr rewrite unix - - - - - trivial-rewrite bounce unix - - - - 0 bounce defer unix - - - - 0 bounce trace unix - - - - 0 bounce verify unix - - - - 1 verify flush unix n - - 1000? 0 flush proxymap unix - - n - - proxymap proxywrite unix - - n - 1 proxymap smtp unix - - - - - smtp # When relaying mail as backup MX, disable fallback_relay to avoid MX loops relay unix - - - - - smtp -o smtp_fallback_relay= # -o smtp_helo_timeout=5 -o smtp_connect_timeout=5 showq unix n - - - - showq error unix - - - - - error retry unix - - - - - error discard unix - - - - - discard local unix - n n - - local virtual unix - n n - - virtual lmtp unix - - - - - lmtp anvil unix - - - - 1 anvil scache unix - - - - 1 scache # # ==================================================================== # Interfaces to non-Postfix software. Be sure to examine the manual # pages of the non-Postfix software to find out what options it wants. # # Many of the following services use the Postfix pipe(8) delivery # agent. See the pipe(8) man page for information about ${recipient} # and other message envelope options. # ==================================================================== # # maildrop. See the Postfix MAILDROP_README file for details. # Also specify in main.cf: maildrop_destination_recipient_limit=1 # maildrop unix - n n - - pipe flags=DRhu user=vmail argv=/usr/bin/maildrop -d ${recipient} # # ==================================================================== # # Recent Cyrus versions can use the existing "lmtp" master.cf entry. # # Specify in cyrus.conf: # lmtp cmd="lmtpd -a" listen="localhost:lmtp" proto=tcp4 # # Specify in main.cf one or more of the following: # mailbox_transport = lmtp:inet:localhost # virtual_transport = lmtp:inet:localhost # # ==================================================================== # # Cyrus 2.1.5 (Amos Gouaux) # Also specify in main.cf: cyrus_destination_recipient_limit=1 # cyrus unix - n n - - pipe user=cyrus argv=/cyrus/bin/deliver -e -r ${sender} -m ${extension} ${user} # # ==================================================================== # Old example of delivery via Cyrus. # #old-cyrus unix - n n - - pipe # flags=R user=cyrus argv=/cyrus/bin/deliver -e -m ${extension} ${user} # # ==================================================================== # # See the Postfix UUCP_README file for configuration details. # uucp unix - n n - - pipe flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient) # # Other external delivery methods. # ifmail unix - n n - - pipe flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient) bsmtp unix - n n - - pipe flags=Fq. user=bsmtp argv=/usr/lib/bsmtp/bsmtp -t$nexthop -f$sender $recipient scalemail-backend unix - n n - 2 pipe flags=R user=scalemail argv=/usr/lib/scalemail/bin/scalemail-store ${nexthop} ${user} ${extension} mailman unix - n n - - pipe flags=FR user=list argv=/usr/lib/mailman/bin/postfix-to-mailman.py ${nexthop} ${user} #dovecot unix - n n - - pipe # flags=DRhu user=vmail:vmail argv=/usr/lib/dovecot/deliver -d ${recipient} Here is what I'm using for /etc/postfix/sasl/smtpd.conf log_level: 7 pwcheck_method: saslauthd pwcheck_method: auxprop mech_list: PLAIN LOGIN CRAM-MD5 DIGEST-MD5 allow_plaintext: true auxprop_plugin: mysql sql_hostnames: 127.0.0.1 sql_user: xxxxx sql_passwd: xxxxx sql_database: maildb sql_select: select crypt from users where id = '%u' As you can see I'm trying to use mysql as my authentication method. The password in 'users' is set through the 'ENCRYPT()' function. I also followed the methods found in http://www.jimmy.co.at/weblog/?p=52 in order to redo /var/spool/postfix/var/run/saslauthd as that seems to be a lot of people's problems, but that didn't help at all. Also, here is my /etc/default/saslauthd START=yes DESC="SASL Authentication Daemon" NAME="saslauthd" # Which authentication mechanisms should saslauthd use? (default: pam) # # Available options in this Debian package: # getpwent -- use the getpwent() library function # kerberos5 -- use Kerberos 5 # pam -- use PAM # rimap -- use a remote IMAP server # shadow -- use the local shadow password file # sasldb -- use the local sasldb database file # ldap -- use LDAP (configuration is in /etc/saslauthd.conf) # # Only one option may be used at a time. See the saslauthd man page # for more information. # # Example: MECHANISMS="pam" MECHANISMS="pam" MECH_OPTIONS="" THREADS=5 OPTIONS="-c -m /var/spool/postfix/var/run/saslauthd -r" I had heard that potentially changing MECHANISM to MECHANISMS="mysql" but obviously that didn't help as is shown by the options listed above and also by trying it out anyway in case the documentation was outdated. So, I'm now at a loss... I have no idea where to go from here or what steps I need to do to get this working =/ Anyone have any ideas? EDIT: Here is the error that is coming from auth.log ... I don't know if this will help at all, but here you go: Aug 11 17:19:56 crazyinsanoman postfix/smtpd[9503]: sql auxprop plugin using mysql engine Aug 11 17:19:56 crazyinsanoman postfix/smtpd[9503]: sql plugin Parse the username [email protected] Aug 11 17:19:56 crazyinsanoman postfix/smtpd[9503]: sql plugin try and connect to a host Aug 11 17:19:56 crazyinsanoman postfix/smtpd[9503]: sql plugin trying to open db 'maildb' on host '127.0.0.1' Aug 11 17:19:56 crazyinsanoman postfix/smtpd[9503]: sql plugin Parse the username [email protected] Aug 11 17:19:56 crazyinsanoman postfix/smtpd[9503]: sql plugin try and connect to a host Aug 11 17:19:56 crazyinsanoman postfix/smtpd[9503]: sql plugin trying to open db 'maildb' on host '127.0.0.1' Aug 11 17:19:56 crazyinsanoman postfix/smtpd[9503]: begin transaction Aug 11 17:19:56 crazyinsanoman postfix/smtpd[9503]: sql plugin create statement from userPassword user xxxxxx.com Aug 11 17:19:56 crazyinsanoman postfix/smtpd[9503]: sql plugin doing query select crypt from users where id = '[email protected]'; Aug 11 17:19:56 crazyinsanoman postfix/smtpd[9503]: sql plugin create statement from cmusaslsecretPLAIN user xxxxxx.com Aug 11 17:19:56 crazyinsanoman postfix/smtpd[9503]: sql plugin doing query select crypt from users where id = '[email protected]'; Aug 11 17:19:56 crazyinsanoman postfix/smtpd[9503]: commit transaction Aug 11 17:19:56 crazyinsanoman postfix/smtpd[9503]: sql plugin Parse the username [email protected] Aug 11 17:19:56 crazyinsanoman postfix/smtpd[9503]: sql plugin try and connect to a host Aug 11 17:19:56 crazyinsanoman postfix/smtpd[9503]: sql plugin trying to open db 'maildb' on host '127.0.0.1' Aug 11 17:19:56 crazyinsanoman postfix/smtpd[9503]: sql plugin Parse the username [email protected] Aug 11 17:19:56 crazyinsanoman postfix/smtpd[9503]: sql plugin try and connect to a host Aug 11 17:19:56 crazyinsanoman postfix/smtpd[9503]: sql plugin trying to open db 'maildb' on host '127.0.0.1' Aug 11 17:19:56 crazyinsanoman postfix/smtpd[9503]: sql plugin Parse the username [email protected] Aug 11 17:19:56 crazyinsanoman postfix/smtpd[9503]: sql plugin try and connect to a host Aug 11 17:19:56 crazyinsanoman postfix/smtpd[9503]: sql plugin trying to open db 'maildb' on host '127.0.0.1' Aug 11 17:19:56 crazyinsanoman postfix/smtpd[9503]: sql plugin Parse the username [email protected] Aug 11 17:19:56 crazyinsanoman postfix/smtpd[9503]: sql plugin try and connect to a host Aug 11 17:19:56 crazyinsanoman postfix/smtpd[9503]: sql plugin trying to open db 'maildb' on host '127.0.0.1' Aug 11 17:19:56 crazyinsanoman postfix/smtpd[9503]: begin transaction Aug 11 17:19:56 crazyinsanoman postfix/smtpd[9503]: sql plugin create statement from userPassword user xxxxxx.com Aug 11 17:19:56 crazyinsanoman postfix/smtpd[9503]: sql plugin doing query select crypt from users where id = '[email protected]'; Aug 11 17:19:56 crazyinsanoman postfix/smtpd[9503]: sql plugin create statement from cmusaslsecretPLAIN user xxxxxx.com Aug 11 17:19:56 crazyinsanoman postfix/smtpd[9503]: sql plugin doing query select crypt from users where id = '[email protected]'; Aug 11 17:19:56 crazyinsanoman postfix/smtpd[9503]: commit transaction Aug 11 17:19:56 crazyinsanoman postfix/smtpd[9503]: sql plugin Parse the username [email protected] Aug 11 17:19:56 crazyinsanoman postfix/smtpd[9503]: sql plugin try and connect to a host Aug 11 17:19:56 crazyinsanoman postfix/smtpd[9503]: sql plugin trying to open db 'maildb' on host '127.0.0.1'

  Read the article

• Emails sent to outlook.com not being delivered

  - by imukcedup

  I'm having an issue that is a little strange. I have a cPanel webserver that I own and have root. I was testing out emailing and noticed some issues. When I send an email to outlook.com address the email sends ok but nothing is recieved at the outlook mailbox. I also dont get an 'email delivery failure notification' in any mailbox. 2014-06-12 09:53:47 SMTP connection from [127.0.0.1]:45334 (TCP/IP connection count = 1) 2014-06-12 09:53:47 1Wv5Rr-0003rA-2K <= [email protected] H=localhost (ourdomain.com) [127.0.0.1]:45334 P=esmtpa A=dovecot_login:joe S=667 [email protected] T="This is a test message" for [email protected] 2014-06-12 09:53:47 SMTP connection from localhost (ourdomain.com) [127.0.0.1]:45334 closed by QUIT 2014-06-12 09:53:50 cwd=/var/spool/MailScanner/incoming/1029481 5 args: /usr/sbin/exim -C /etc/exim_outgoing.conf -Mc 1Wv5Rr-0003rA-2K 2014-06-12 09:53:50 1Wv5Rr-0003rA-2K SMTP connection outbound 1402581230 1Wv5Rr-0003rA-2K ourdomain.com [email protected] 2014-06-12 09:53:50 1Wv5Rr-0003rA-2K => Test Account <[email protected]> R=archive_outgoing_email T=archiver_outgoing 2014-06-12 09:53:52 1Wv5Rr-0003rA-2K => [email protected] R=dkim_lookuphost T=dkim_remote_smtp H=mx1.hotmail.com [65.54.188.110] X=UNKNOWN:AES128-SHA256:128 C="250 <[email protected]> Queued mail for delivery" 2014-06-12 09:53:52 1Wv5Rr-0003rA-2K Completed I have checked the outlook.com's spam folders and its not in there either. This is a new IP address allocation from our ISP and there was a block on gmail addresses, so we know it was used for spam. But with gmail we got a notifaction of failure and I know outlook/microsoft also send out notification. Does anyone know what could be happening here? Thanks

  Read the article

< Previous Page | 294 295 296 297 298 299 300 301 302 303 304 305  | Next Page >