Search Results

Search found 93284 results on 3732 pages for 'virtual server 2005 r2'.

Page 298/3732 | < Previous Page | 294 295 296 297 298 299 300 301 302 303 304 305  | Next Page >

  • SQL Server 2008, not enough disk space

    - by snorlaks
    Hello, I'm executing sql query on my database. I have SQL Server 2008 installed on my D harddrive which has 55 GB free space. I have also C drive which has sth like 150 MB free (right now). While executing that query on quite a big table (16 GB) I have an error: An error occurred while executing batch. Error message is: Not enough disk space. I would like to know if there is any possibility that I can make SQL Server to use D drive instead of C Or maybe there is any other problem with what I'm doing ? Thanks for help

    Read the article

  • Sharing settings between a few virtual hosts in Apache

    - by Ivan Virabyan
    There are many virtual hosts in my apache configuration, each having quite a big amount of settings. The problem is that most of the virtual servers have the same settings. So config file is huge, full of identical virtual hosts, that differ only by ServerName directive. To change or add setting, I need to go through all of these vhosts. Is it possible to somehow share settings between virtual hosts, but still having few of them with their own ones? I hoped dynamic vhosts would be a good solution, but as I understand, it doesn't fit my problem, because there is no way to set specific settings for some of the vhosts. Furthermore I don't want my vhosts to be dynamic, because I have a fixed number of them. ServerAlias directive is also not a solution, because I need to know what url the user came from.

    Read the article

  • Windows Server (2012) ASP.NET

    - by alexus
    I honestly don't even know where to start.. I created a Windows Server 2012 (Azure) VM, inside of VM I THOUGHT I did everything whatever is required to run ASP.NET application.. BUT that wasn't a case. I'm stuck and unable to run a simple ASP.NET app HelloWorld( and I blame Microsoft! I had everything running before they decided to wipe out my VM so that's why I'm redoing that VM. What can I do to resolve this? Where should I look? My HelloWorld application returns Internal Server Error 500.19. I've must have missed something somewhere, but I need someone help me to pinpoint. PLEASE HELP!

    Read the article

  • Windows server 2003 mapping home drive wrong

    - by Sandman2010
    hey all, first question... we have around 30 servers in an Active Directory environment with 600 student computers and 100 staff desktops with XP SP2/3, the win server 2003 has the staff home drives on a NAS and in the last few days after some server updates is now mapping home drives to the \servername\home instead of \severname\home\%username%, its simple to re map the network drive but is annoying. we dont use login script to map home drive but use a VB script for other network drives and if we add the home drive mapping to that it works, but shouldnt the profile option in users AD account map that correctly? which do you all recommend, AD profile mapping or VB Script mapping Home drives? thanks Steven

    Read the article

  • Linker error: wants C++ virtual base class destructor

    - by jdmuys
    Hi, I have a link error where the linker complains that my concrete class's destructor is calling its abstract superclass destructor, the code of which is missing. This is using GCC 4.2 on Mac OS X from XCode. I saw http://stackoverflow.com/questions/307352/g-undefined-reference-to-typeinfo but it's not quite the same thing. Here is the linker error message: Undefined symbols: "ConnectionPool::~ConnectionPool()", referenced from: AlwaysConnectedConnectionZPool::~AlwaysConnectedConnectionZPool()in RKConnector.o ld: symbol(s) not found collect2: ld returned 1 exit status Here is the abstract base class declaration: class ConnectionPool { public: static ConnectionPool* newPool(std::string h, short p, std::string u, std::string pw, std::string b); virtual ~ConnectionPool() =0; virtual int keepAlive() =0; virtual int disconnect() =0; virtual sql::Connection * getConnection(char *compression_scheme = NULL) =0; virtual void releaseConnection(sql::Connection * theConnection) =0; }; Here is the concrete class declaration: class AlwaysConnectedConnectionZPool: public ConnectionPool { protected: <snip data members> public: AlwaysConnectedConnectionZPool(std::string h, short p, std::string u, std::string pw, std::string b); virtual ~AlwaysConnectedConnectionZPool(); virtual int keepAlive(); // will make sure the connection doesn't time out. Call regularly virtual int disconnect(); // disconnects/destroys all connections. virtual sql::Connection * getConnection(char *compression_scheme = NULL); virtual void releaseConnection(sql::Connection * theConnection); }; Needless to say, all those members are implemented. Here is the destructor: AlwaysConnectedConnectionZPool::~AlwaysConnectedConnectionZPool() { printf("AlwaysConnectedConnectionZPool destructor call"); // nothing to destruct in fact } and also maybe the factory routine: ConnectionPool* ConnectionPool::newPool(std::string h, short p, std::string u, std::string pw, std::string b) { return new AlwaysConnectedConnectionZPool(h, p, u, pw, b); } I can fix this by artificially making my abstract base class concrete. But I'd rather do something better. Any idea? Thanks

    Read the article

  • 504 Gateway Timeout on server clusters

    - by Sixfoot Studio
    Hi All, Here's our scenario: We're running three websites on three web servers hosted on virtual machines running the following: IIS6 Win 2003 Standard Edition Oracle 10g Sitefinity 3.7 We do not have constant control over these servers and something's gone wrong in the interim in that we're getting constant 504 Gateway Timeouts. The other thing that's happening is that if you hit one of the sites, that site is trying to pull themes from one of the sites App_Themes folder in Sitefinity, which of course should not be happening at all. If someone has any ideas on why this should suddenly have started happening I would appreciate it. Many thanks

    Read the article

  • Need help with setting up MS-SQL on EC2.

    - by Hareem Haque
    I have a large MS-SQL database that i need to send to the aws cloud. The issue is how do i persist my sql data and how to setup MS-SQL cluster using windows AMI. The real issue is that for replication i need to use the private ip's of the instances. However, these ip's are always dynamic and will change on server launch. Any ideas on how i can get rid of this problem. I really appreciate your help Best Regards Hareem Haque

    Read the article

  • How do I schedule a task to run every hour indefinitely on Server 2003

    - by JMK
    I am moving a scheduled task from a Windows 7 machine to a Windows Server 2003 machine. On Windows 7 I can configure my task to run every hour indefinitely by setting up a custom trigger like so: On Windows Server 2003, I assume I need to use the advanced schedule options, and I have got this far: Whether I choose duration or time, my task seems to have an expiry date, how do I get this to run indefinitely? The only thing I can think of at the minute is to setup 24 schedules for my task, one for each hour but there has to be a more elegant way. Thanks

    Read the article

  • Server 2008 Active directory file sharing Restriction

    - by Usman
    My network scenario is: Two location connected each other through Wireless towers. 1st network ip address are 10.10.10.1 to 10.10.10.150 2nd network ip address are 10.10.10.200 to 10.10.10.254 Both location using their own ACTIVE DIRECTORY (MS SERVER 2008) and share their data with each other network through file sharing. My Problem is that every single client can explore the whole network. by simply typing \computername. i want to implement some restriction on network regarding file sharing. i want to restrict 1st Network Clients to open 2nd network Computer or server. Is there have any Group Policy or Folder permission scenario that i implement on my both network..

    Read the article

  • Changing Internet connection on ISA Server 2000

    - by garyb32234234
    Hi We are getting a new internet connection installed and will need to unplug the old one and connect this to our ISA Server 2000. Will this be a simple swap out job? We will be given a new ip, which i know i will have to enter into the external network card TCP/IP page. I will also be given the default gateway to enter. The ISP engineer said we may have to reset the ARP? cache, if we dont know how we will have to reset the ISA server? Has anyone any experience? The current connection is with the same ISP but it was owned by the business park were we are located and they linked up an ethernet port to what i assume is their own router. Hope you can help, i know that ISA 2000 is somewhat less easy to use than the newer versions.

    Read the article

  • SQL Server Authentication vs Windows Authentication

    - by Nandu
    Hi, I am a SQL Server newbie and would really appreciate any help. I have created a new login (test2) with sql server authentication and granted select & vierw definition permission on another schema (test1) to test2. I am however not able to see the objects of test1 in the object explorer. However I can select the objects from the Query Window. Since this new login is being used to develop reports the user would like to view the objects in the Object Explorer. Another user test3 created using windows authentication and similar permissions is able to see test1's objects in the explorer. Please let me if this is the cause and if not how can help test2 see the objects in Object Explorer.

    Read the article

  • Home Server Restore

    - by Bryan Avery
    I have had to reinstall Home Server on my server and I would now like to restore it back to the state it was the last moment it stopped. I have the hard drive in a state it was last in, which is a small 250 gb hard disk. I have now installed 1.5tb hard disks, and installed a full licenced copy, as the original copy was a trial version. So I'm in a state where I have a new install, I have one of the old drives plugged in, but I can't transfer the old backups across, how do I do this?

    Read the article

  • Cisco NAT + IPSec + Web Server Configuration Question

    - by zagman76
    Hello - I currently have a Cisco 881W, and it is configured with one of our static IPs to do basic NAT for the network. We also have a web server that needs it's own IP. I configured the NAT for the 2nd IP, however now traffic through our IPSec VPN doesn't route to the web server properly (well, it routes to the internet, rather than through the Tunnel). I followed the instructions here: http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a0080094634.shtml But now the outbound NAT doesn't seem to be working properly - it keeps going to the NAT of the Cisco, and not the designated IP address. If anyone can assist, I would appreciate it greatly. Let me know what you need, and I'll get it to you! Thanks!

    Read the article

  • Own hosting, own domain on Virtualbox Ubuntu server - dynamic IP

    - by Pawel
    Hi, I have bought my TLD domain, say domain.com. What I'd like to do is to host the website available under this address on my own computer. I'm assigned a dynamic IP, and I'm also behind a router in my local network. I'd run sites on my ubuntu server on a virtualbox machine which is available in my local network. Preferably, I'd like to have my own domain on some server, with which I could experiment as much as I need (so it's only for educational purposes), but I can't afford to buy such a service. Is it feasible? Can you provide steps I'd need to take to configure it (could be just general explanation). I'd need some guidance, please.

    Read the article

  • Can't set up IIS Web Server on Server 2008 x64 correctly (what have I missed?)

    - by balexandre
    Using a VM I installed Windows 2008 Server x64 and as the image below shows, added the IIS Role full image and assigned all role features of IIS full image But if I have an ASP.NET (aspx) page that does (C#) Session["test-session"] = "A"; and read in other page I always get nothing! NOTE: I do have an entire ASP.NET web application, the example above is to be succinct and explicit on what is the problem I'm facing. Can anyone know what do I have to do to the Server, so I can use the Session variables? All help is greatly appreciated, Thank you

    Read the article

  • Windows 2003 Server Intermittent DNS Issues

    - by Mike
    Looking for a little help here. I have a Windows 2003 DNS Server set up on our network. Lately computers on our LAN have been, at times, unable to resolve a certain sub domain for our website whereas other times the request is resolved just fine. During these periods of "downtime" all other network activity (i.e web sites, internal resolutions, network shares, etc.) remains normal. I can tell it is a problem with our DNS server because the resolution always works from outside our network. I'm hoping someone out there has experienced something similar or could at least offer me place to start troubleshooting. Thanks!

    Read the article

  • Mail sending program & exchange server

    - by Emre
    Hi, I have been asked to send about 6500 e-mails to addresses in a member database. I have written the program, that sends and reports the ones that couldn't send etc. But my concern is that this program will just call smtpclient.Send(); and I don't know what happens if 6000 mails are in the queue. Server is MS Exchange as I have been told. Note: I am planning to send them, say 500 by 500. But what if an exception occurs on the Exchange server at 120... then what happens to the other ones.. I will appreciate little insight to the subject. Thanks in advance.

    Read the article

  • Standalone server setup for compute capacity

    - by mikera
    I'm developing an application for my company that will require a lot of compute capacity (running some very big mathematical calculations), and looking for some form of server setup to do this. For various reasons, we want to run this on-site in our office rather than hosting it externally. It's been a while since I last had to set up my own servers so I thought I would tap into the collective wisdom of serverfault! My broad requirements are: Budget $30-50k, with an aim to get as much compute capacity as possible for that budget 64-bit servers suitable to run Ubuntu Linux + Java Some relatively standalone rack that can be installed in secure office space Fast/low latency network connections between the servers, but don't really care about connectivity to the outside world Storage capacity shared between the servers - they don't necessarily need their own storage providing they can be booted from a common image Downtime can be tolerated (since the calculations are run in batch mode) The software itself is fault-tolerant, so there is no need for extra resiliency in the server setup (cheap replaceable commodity parts will be fine in general) Given these requirements what kind of setup would you recommend and why?

    Read the article

  • Setting up Virtual Host in Fedora Core 15 using apache

    - by Roland
    I'm trying to setup a couple of Virtual Host files on my Localhost PC running Fedora Core 15. Now I get this working, but now onloy one Virtual Host site works, and if I type in 127.0.0.1/test/testApp.php which is not related to the Virtual Host site , I get redirected to the Virtual Host site. Here's what I did. I created a new folder called virtualhosts in /etc/httpd/ where all my host files are stored in the following format site.conf In /etc/conf/httpd.conf I enabled NameVirtualHost *:80 and included the host files at the bottom of the config page like this Include virtualhosts/*.conf In /etc/hosts I added the line 127.0.0.1 website No when I run sudo httpd -t I get Syntax OK I restart apache and then the Virtualhost works, but as soon as I add other hosts and only use 127.0.0.1 as above it still links to the original host. Am I doing anything wrong here or left out something? An example of my Virtual Host file looks like this <VirtualHost *:80> ServerAdmin [email protected] DocumentRoot /var/www/html/website/ ServerName website ServerAlias website ErrorLog logs/dev-error_log CustomLog logs/dev-access_log common Alias /blog /var/www/html/blog/ <Directory /var/www/html/website/> Options FollowSymLinks Allow Override All Order allow,deny allow from all </Directory> #php_value error_reporting E_ALL & ~E_NOTICE & ~E_DEPRECATED php_flag display_errors On php_value date.timezone Europe/London </VirtualHost>

    Read the article

  • SQL Server Reporting authentication not working

    - by Keith
    I'm not exactly sure what went wrong but our SQL Server Reporting Services authentication is no longer working correctly. When I try to load the site, it asks for a username and password, and mine doesn't work. I checked the service and it is using the NT AUTHORITY\NetworkService to logon. Since it is using NetworkService to logon, I read on Microsoft's site that I need to use these settings in the RSReportServer.config file: <AuthenticationTypes> <RSWindowsNegotiate /> </AuthenticationTypes> <EnableAuthPersistence>true</EnableAuthPersistence> Which is what I have set. It still asks for the password. When I set the Authentication to RSWindowsNTLM, it does login but everytime I click on a link, it asks for a password (the password doesn't seem to prevent anything from loading). Anyone know what is going on here? I'm not an expert to SQL Server so I may be missing something.

    Read the article

  • SQL server availability issue: large query stops other connections from connecting

    - by Carlos
    I've got a high-spec (multicore, RAID) server running MS SQL 2008, with several databases on it. I have a low throughput process that periodically needs a small amount of information from one of the DBs, and the code seems to work fine. However, sometimes when one of my colleagues does a huge query against one of the other DBs, I see full CPU usage on the machine, and connections from my app time out. Why does this happen? I would have thought the many cores and harddisks would somehow (together with cleverly written DB server) be able to keep at least some of the resources free for other apps? I'm pretty sure he doesn't use multiple connections for his query. What can I do to prevent this?

    Read the article

  • Protect individual sites on Ubuntu/Apache server

    - by Christoffer
    Hi,?? I need to set up a Apache server configuration for some client sites that run under the same Ubuntu 9.10 machine. All sites are allowed to run PHP, Python and Ruby on Rails. I do not control the source code of these sites and so I need to set up a filter in order to prevent one user to reach files on another users account.?? If I run a script to list files in "/" from one account, I can browse some files and directories in the actual server root. I want to set the root for each account to /var/usersite.com/www/ instead so that listing files in "/" shows the files in the client's root. ??How is this most easily configured??? Cheers!? /Christoffer

    Read the article

  • List existing file server permission groups/users

    - by Patrick
    So we have taken over a new client and their existing file server is frankly a mess. We have migrated their old file server from a 2k box to a 2k8 DFS cluster and now I'm looking at rebuilding both the folder structure and their permissions. Unfortunately its been half done with AD groups (poorly named/no description/notes) and half with individuals named in security on the folders themselves. What I'm looking to do is to dump a complete list of all the folders with their security permissions (ideally I'd like to ignore files but not essential). CACLS got me half way there but fails with an odd error message and its output isn't particularly user friendly and I'm working with roughly 2Tb/250,000 files here so I really need something that gives me a bit more functionality. Question : does anyone have any experience of something similar/know of a bit of software that might help me out?

    Read the article

  • configuring linux server firewall to allow acces on a certain range of IP addresses

    - by eggman20
    Hi Guys, I'm not sure if this is the right place to ask this but I'm currently trying to get an Ubuntu 10.10 server up and running for the first time and I'm using Webmin for administration. I'm stuck on the setting up the firewall. What I need to do is to ONLY allow a range of IPs (e.g 128.171.21.1 - 128.171.21.100) to access the HTTP server and Webmin. I've seen a lot of tutorials but none of them fits what I needed. Thanks in advance!

    Read the article

< Previous Page | 294 295 296 297 298 299 300 301 302 303 304 305  | Next Page >