Search Results

Search found 12726 results on 510 pages for 'compatibility mode'.

Page 299/510 | < Previous Page | 295 296 297 298 299 300 301 302 303 304 305 306  | Next Page >

• Setting a Static IP Running FreeBSD8 in VirtualBox hosted on Windows 7

  - by gvkv

  I'm using VirtualBox on Windows 7 (host) to run a FreeBSD (guest) based web server. I`ve assigned a static ip of 192.168.80. 1 to the (virtualized) NIC which is run in bridged mode. The problem is that when I ping an external server (such as google.com) I get a No route to host error: dimetro# ping google.com PING google.com (66.249.90.104): 56 data bytes ping: sendto: No route to host ... I can ping the BSD server from both another virtualized machine and my host machine and from the server, I can ping everything on the network. The router ip is 192.168.1.1/16. ADDENDUM: I have the following lines in /etc/rc.conf on the BSD VM to configure networking: defaultrouter="192.168.1.1" ifconfig_em0="inet 192.168.80.1 netmask 255.255.0.0"

  Read the article

• Windows Media Center command line options?

  - by Pridkett

  Is there a command line interface to Windows Media Center in Windows 7. I have an SSH daemon installed on my media center box and would love to be able log in via SSH and get the list of upcoming recordings. As it is, I need to use Remote Desktop and then tell Media Center to run in GDI mode to display the upcoming recordings which is slow and cumbersome. Here are interesting commands that I'm wondering about: List upcoming recordings List most recent recordings Status of scheduler I'd rather not have to install Remote Potato to accomplish this.

  Read the article

• Wrong java -version being reported

  - by Malachi

  I am running Windows 7 Professional x64 and have the following Java versions installed: x64 C:\Program Files\Java jdk1.6.0_24 jdk1.7.0_04 jdk1.7.0_07 jre6 jre7 x86 C:\Program Files (x86)\Java jre1.6.0_07 jre6 jre7 in my environment variables I have my PATH containing C:\Program Files\Java\jdk1.6.0_24\bin and JAVA_HOME set to C:\Program Files\Java\jdk1.6.0_24\bin However running java -version reports java version "1.7.0_07" Java(TM) SE Runtime Environment (build 1.7.0_07-b10) Java HotSpot(TM) 64-Bit Server VM (build 23.3-b01, mixed mode) How is this the case when there is no reference to this version of Java in my Environment variables. Any help on this issue would be great as I am trying to run Apache ANT using Java 1.6.

  Read the article

• Laptop VGA Out Stopped Working

  - by Jack7890

  I regularly use an external monitor with my laptop. Today, when I booted up, the external monitor refused to work--it just keeps going into power save mode. I tried a different external monitor and had the same problem, so it must be a problem with the laptop itself. Things I've tried: Going into the Display Settings via the Control Panel (I'm running Vista) and attaching/unattaching/reattaching the external monitor. Turning the computer off, unplugging, plugging it back in, and rebooting Blowing into the VGA out to get rid of any dust Toggling through the Fn+F7 options I'm thinking maybe this is an issue with my video card? If necessary, I'm comfortable opening up my laptop and playing around with things, but I'm not sure what to look for. Does anyone have any suggestions?

  Read the article

• How to use an USB digitizer?

  - by Magnetic_dud

  Hello, i am in China now, and when i saw an USB digitizer (resistive), i bought it, thinking that i could be used as a mouse. When i connect it to my windows 7 rc1 laptop, the system properties says "pen input available" But, nothing happens when i touch the panel... i installed the bundled drivers, in chinese only, and NOT in unicode (so the text is garbled) When i install the driver, i get access to a special key on the tablet, "switch from pen input to mouse", and the driver will move the pointer according to the position on the tablet. (but no click) If i use the "pen mode", the computer will use a special chinese IME that is very awkard, i want to use the microsoft ime, and be able to draw/take notes on the screen There are "generic" drivers? Or just a plain mouse driver that will click when i press on the surface The tablet name is "qiancai"

  Read the article

• My computer resets when i try to install Windows 7 (USB/DVD)

  - by Ranhiru

  I had a troublesome software starting up when Windows 7 was starting and i had no way to remove it because i couldn't log in to Windows. Not even safe mode. But i used Hiren's Boot CD to edit the registry to stop that software from starting up... But my efforts were not useful as Windows kept on going to an ultimate freeze just before the login screen should have been shown. And just freezes and I cannot do anything. So i decided heck with it and i now want to format the disk and reinstall a fresh copy of Windows 7. But now regardless of USB or DVD i use to boot the setup, it loads fine till you see the animating Windows and it just resets the laptop! Just plain resets! Hiren's Boot CD and Mini XP, strange enough but still works :( Any ideas what might be causing the laptop to reset in Windows 7 setup?

  Read the article

• Why does my screen dim on a desktop installation of Windows 7?

  - by Robert Cartaino

  Periodically, while using my Windows 7 Pro desktop installation, the screen suddenly dims. The brightness is about 75% normal (estimate). It's as if I am in a power-saving mode on a laptop running on batteries. But this is a full desktop installation. I know it is not a hardware glitch or monitor adjustment issue because the Windows cursor is still bright white while everything else goes dim. The Control Panel Power Options have not been changed. They are set to "Balanced [active]" and I have tried restoring the default settings. Flipping through the power and display settings, everything looks "normal." There is no screen saver or power-off-after settings apparent. Rebooting the system resets everything to full brightness but I can't find a way to restore it in Windows or to keep it from happening in the first place. Suggestions?

  Read the article

• Restoring Mac-bootcamp-windows-partition image to Windows machine

  - by jpwagner

  Hi, I'm running Windows XP sp3 on my mac using bootcamp. Objective: I'd like to move this partition to a windows machine. This is what I tried: 1. create image using winclone 2. restore drive to disk partition on windows machine using paragon 3. reboot from new partition Results: it attempts to boot in XP (windows flag and progress bar load screen) but then gives me the old BSOD. safe mode just hangs while loading. (I then uninstalled KB977165 on a hunch, but that did nothing to help the issue.) Any ideas, advice, etc would be greatly appreciated. Thanks!

  Read the article

• Restoring Mac-bootcamp-windows-partition image to Windows machine

  - by jpwagner

  Hi, I'm running Windows XP sp3 on my mac using bootcamp. Objective: I'd like to move this partition to a windows machine. This is what I tried: 1. create image using winclone 2. restore drive to disk partition on windows machine using paragon 3. reboot from new partition Results: it attempts to boot in XP (windows flag and progress bar load screen) but then gives me the old BSOD. safe mode just hangs while loading. (I then uninstalled KB977165 on a hunch, but that did nothing to help the issue.) Any ideas, advice, etc would be greatly appreciated. Thanks!

  Read the article

• Brightness too dark or too bright

  - by YatharthROCK

  Basically, below a seemingly-arbitrary threshold (seems to be around 60%) my laptop screen is too dark to really make out much, and above that threshold it takes its maximum brightness (which is waay too bright for my eyes). This problem only occurs when I change the brightness using Windows' UI. Changing the brightness using Fn keys on my keyboard works as expected; unless the screen went into dark mode because of Windows, in which case they have no effect. This problem started occuring on my ASUS laptop very recently. My laptop has a poor battery, but I don't think that's related. What is going on? I tried resetting power plan settings, turning off adaptive brightness and restarting. I'll give any info asked for. Help required urgently...

  Read the article

• Google Chrome suspicious connections

  - by Poni

  I'm using Chrome at Windows and with TCPView (of the SysInternals freeware suit) I see that chrome.exe establish connections to these IPs: 173.194.37.104 209.85.146.138 Using http://www.ipaddresslocation.org/ I check about these IPs and see they're related to Google. Now, in order to clarify, these are the exact things I do: Open up chrome, the default page is set to BLANK (i.e no homepage whatsoever). Then I get into my website which has a blank page, so no "other" http requests are made. Right from this point there is a persistent connection, usually to '173.194.37.104'. What are these?? Very suspicious.. Edit #1: - I'm in 'incognito' mode right from start, when launching Chrome, using a shortcut with the '-incognito' switch. - I've turned off all phishing protections and other "advance" features in order to reduce Chrome's network activity.

  Read the article

• Will disabling NAT on my wireless router cause a performance hit on my DSL router?

  - by user117313

  I have a Thomson TG508v2 router/modem and a brand new AirPort Extreme connected to it. At first, I set the AirPort Extreme to "share a public IP", which enables DHCP/NAT. Everything works great but I was having the Double NAT error. So I set the AirPort Extreme as bridge mode, which disables DHCP/NAT and let my crappy modem handle my internal network IPs. Will this cause any performance hit in my network? I'm worried because I'll outsource this job from AirPort Extreme (premium hardware) to the crappy modem. Before you suggest, I tried setting my modem as a bridge and configuring PPPoE on the AirPort Extreme, however it wouldn't connect to the internet, so I just dismissed leaving the modem as bridge.

  Read the article

• Error while trying to configure VLAN with Open vSwitch

  - by Abhishek Chanda

  I am trying to connect a number of VMs using Open vSwitch. The VMs are on two separate physical boxes. Here is what I did: Created two tap devices on one physical host sudo ip tuntap add mode tap tap0 and same for tap1 Bring them up sudo ip link set tap0 up Add them as ports to Open vSwitch (br0 was created as a OVS bridge previously) sudo ovs-vsctl add-port br0 tap0 tag=1 Now I booted the VMs (using VirtualBox) and assigned addresses 192.168.122.11 and 192.168.122.12. Now when I try to ping one VM from another, I get the error Connect: network is unreachable. Since both VMs are connected to the switch on the same VLAN, I expect to be able to ping one from another. What is going wrong here?

  Read the article

• DOS Batch file to find "new" files by date

  - by Todd McArthur

  My PC has entered an infinite BSOD loop - but I do have access to a safe-mode command prompt. I'm trying to get an idea of "what changed" that might have triggered this. e.g. I might have gotten a virus, or an app update went belly up. I'd like to thus see which files were created/modified in the last few days/week or at least the *.exe, *.dll, *.com, *.bat etc. I thought I was ok with my Batch-fu but I'm stumped on how to write a quick batch file/command that would list the files for me. REM This will find the files, but the results are all muddled REM all EXE files, reverse sort by date, recursively through sub-directories dir *.exe /O-D /S What I'd really like is to find all (executable filetypes) that were created/modified in the last 3-7 days. Can anyone point me in the right direction?

  Read the article

• How do I make YouTube videos fill up the entire screen when using dual monitors?

  - by Jephir

  I am using a dual monitor setup on Ubuntu 9.10 using the TwinView configuration in NIVIDA X Server Settings. My total resolution is 2960x1050 pixels, and my individual monitors are 1680x1050 (primary) and 1280x1024 (secondary). When going into fullscreen mode on any video on YouTube, I only see a cropped version of the video on my primary display as seen below. This does not occur on any other video sharing website - they properly make the video to fill the entire screen on my primary monitor. To my knowledge this problem only happens on YouTube.

  Read the article

• Ubuntu won't boot, only displays GRUB terminal

  - by Badea Sorin

  I have a problem with my Ubuntu 11.04 installation. I've installed Ubuntu 11.04 from Windows, it worked fine for days, but today it won't boot. When I start the machine, GRUB loads. There is the Windows 7 loader, I select Ubuntu from there and after that, I should see the Ubuntu GRUB menu, where I'd select the mode to boot Ubuntu. However, I can't see that anymore. I directly get to a GRUB terminal. Can anyone help me with this? How would I recover my data or reset the boot loader?

  Read the article

• how to delete protected files in ntfs?

  - by Balchev

  Hello, I want to delete old windows directory from my system drive (C) , but I am unable to due NTFS perms.I tried from Win 7 and Win 2003, but can't do it. I tried safe mode as well with same result. I there any way to work around this (other then formating the drive)? Perhaps changing the owner or something? It errors at files like "oldwin/bfsvc.exe". Is there some "superuser" in windows similar to linux root account? Thanks

  Read the article

• Attach certificate to remote desktop connection - not gateway services

  - by Jordan S

  I have a Windows server that I want to attach a 3rd party signed certificate for remote desktop connections. This is not a remote desktop services server, i.e. it is just remote desktop administration. There is lots of info on the internet about attaching a certificate to remote desktop services, but I want to attach mine to just plain remote desktop connection for administration purposes. If anyone know how to do this, please holler! I have imported the certificate into the Remote Desktop store in the certificates mmc snap in, and have tried running the wmic command in this question (Configure custom SSL certificate for RDP on Windows Server 2012 in Remote Administration mode?) but this fails. THANKS!

  Read the article

• Is there anything that can be done to make X forwarding over LAN less painful?

  - by Earlz

  I have two *nix machines that I like to remotely do graphical things sometimes with. One of those machines is my Arch Linux media server, and another is my OpenBSD router/general server. My current task was installing a Windows XP over virtual box on my media server. I preferred to do the installation from my main workstation so that I could continue to watch TV from my media server on it's "actual" display. I soon noticed that X forwarding is quite painful though, even over low-latency LAN connections. Are there any settings I can tweak to make it a bit less painfully slow, jittery, and laggy? My LAN is rather small, 100Mbit, and ping times to the other box average at about 0.15ms. Also, I know Virtualbox has a VNC mode it can use instead of doing X forwarding, but this particular task was just an example

  Read the article

• Umbraco on Windows 7 64-bit

  - by HeavyWave

  I'm trying to install Umbraco CMS on Windows 7 64-bit and I get the following exception: [HttpException (0x80004005): Could not load file or assembly 'ImageManipulation, Version=1.0.2105.41209, Culture=neutral, PublicKeyToken=null' or one of its dependencies. Failed to grant minimum permission required. The application pool's trust mode is set to 'Full', all the user permissions are just as on other sites hosted on the same machine. I went through all relevant topics on Umbraco's forum, but all advices are about the trust level. How do I fix this?

  Read the article

• Can't bring NAT to work

  - by user31738

  Hello, I bought a D-link DIR-300 wireless router and i can't bring NAT to work, i have an ssh and http service i need to forward to the internet. My connection is as follows: I have an ADSL connection, i'm using a ADSL ethernet modem connected and working, it doesnt let me put it on bridge mode. I have my router connected to my adsl modem through ethernet, it gets its ip through DHCP (and i'ts always the same) I have a desktop computer running linux with apache and openssh configured and working, it has fixed ip. I configured the NAT in the modem forwarding port 22 from the router ip to the internet. In the router i setup NAT forwarding port 22 from the desktop computer fixed ip to out there. This setup already worked with a fonera i had before, can anyone help me with this or tell me what kind of tests do i need to do? How can i test if the router is forwarding ports correctly before the modem?

  Read the article

• Windows Server 2008 R2 stuck at System Recovery Options

  - by Magnus

  One of my Windows Server 2008 R2 server has started to go into System Recovery Options at reboot. I have tried to let it go through a System Image Recovery, which it says completes successfully. But after reboot it again wants to do a system recovery. Safe mode doesn't work; it still wants to do a system recovery. Putting in the install DVD trying to do a repair actually brings up the very same System Revoery dialog again. Nothing has changed configuration wise. Any ideas?

  Read the article

• Windows Server 2008 R2 stuck at System Recovery Options

  - by Magnus

  My Windows Server 2008 R2 has started to go into System Recovery Options at reboot. I have tried to let it go through a System Image Recovery, which it says completes successfully. But after reboot it again wants to do a system recovery. Safe mode doesn't work; it still wants to do a system recovery. Putting in the install DVD trying to do a repair actually brings up the very same System Revoery dialog again. Nothing has changed configuration wise. Any ideas?

  Read the article

• Why won't apache load a symlinked file from conf.d?

  - by kdt

  I have an apache configuration file which works fine when it's placed directly in /etc/httpd/conf.d/foo.conf. However, when I move the same file somewhere else (for example, move it to /tmp/foo.conf) and then create a symlink with ln -s /tmp/foo.conf /etc/httpd/conf.d then apache fails on startup with: httpd: could not open document config file /etc/httpd/conf.d/foo.conf I've tried making the file and the symlink mode 777, and tried changing them to be owned by the apache user. It seems like apache is failing to load the file purely on the basis of it being a symlink, but I'm sure I've used symlinks successfully on other machines. Is there something I'm missing? Does apache have an option for refusing to load config files if they're symlinks? The operating system is CentOS 4.4, apache version 2.0.52.

  Read the article

• puppet restart service failure

  - by Roman

  help me please with service restart # changing iptables` file { "/etc/sysconfig/iptables": ensure => "present", content => template("all_in_one/iptables.erb"), owner => root, group => root, mode => 600, } service { "iptables": ensure => running, enable => true, hasstatus => true, hasrestart => true, subscribe => File["/etc/sysconfig/iptables"] } output is: err Failed to call refresh: Could not restart Service[iptables]: Execution of '/sbin/service iptables restart' returned 1

  Read the article

< Previous Page | 295 296 297 298 299 300 301 302 303 304 305 306  | Next Page >