Search Results

Search found 16809 results on 673 pages for 'nathan long'.

Page 299/673 | < Previous Page | 295 296 297 298 299 300 301 302 303 304 305 306  | Next Page >

  • Releasing an open source project without getting embarrassed

    - by Hopeful
    I've been working by myself on a fairly large open source project for quite a while and it's nearing the point where I'd like to release it. However, I'm self-taught and I don't really know anyone who could adequately review my project. A few years ago, I had released a small bit of code which pretty much got ripped apart (in a critical sense) on the forum where I released it. Even though the code worked, the criticism was accurate but brutal. It prompted me to begin searching for best practices for everything and in the end I feel that it made me a much better developer. I've gone over everything in my project so many times trying to make it perfect that I've lost count. I believe in my project and think it has the potential to help a lot of people and I feel like I've done some cool things in interesting ways with it. Still, because I'm self-taught, I can't help but wonder what gaps exist in my self-education. The way my code was ripped apart last time isn't something I'd like to repeat. I think my two biggest fears with releasing my project that I've poured countless hours into are being absolutely embarrassed because I missed some patently obvious things because of my self-education or, worse, releasing it to the sound of crickets. Is there anyone who has been in a similar situation? I'm not afraid of constructive criticism, so long as it is constructive and not just a rant on how I screwed up. I know there is a code review site on StackExchange, but it's not really set up for large projects and I didn't feel like the community there is large enough yet to get good feedback if I were to post parts of my project piecemeal (I tried with one file). What can I do to give my project at least some measure of success without getting embarrassed or devestated in the process?

    Read the article

  • Unable to outside access service from inside LAN

    - by erotsppa
    I have a weird port forwarding problem. I tried to open my port 22 to the outside network. I was able to access it as long as I am not inside the LAN. I can access it from my office for example. But from within the LAN, I can access the port using the local ip, but I can't access the port using the external IP. It's as if the router is blocking the loopback. I've check all my router settings, turned off anything firewall/filtering related. Any ideas?

    Read the article

  • unity, seeing all instances of same open application windows on all virtual desktop

    - by Nasser M. Abbasi
    I noticed this strange issue with unity. I am using 12.04. The desktop has 4 virtual desktops, which I can switch between using the 'workspace switcher' which is very nice. But I noticed the following: When I have 2 instances of the same app (say 2 different firefox windows, or 2 different terminal windows), in 2 different virtual desktops, then I click on the icon for that application located on the launcher panel (the left long strip with icons on it), then I see the application comes into focus. Then when I click again right away (on the same icon on the launcher), then now all instances of this application that are open come into ONE view (may be on was on desktop 1, and the other was on desktop 3 for example) and then I can now click on the one instance window that I want to select to use. This is all very nice actually. But this does NOT work for all applications! I just tried it, and it worked for firefox, and for gedit and for the gnome terminal. I have one firefox window open in virtual desktop 1, and another window open in virtual desktop 2. I clicked once on the firefox icon, then again, and both windows came into the main desktop and I was able to select which one to use. When I tried the same thing on dolphin file manager, which I also had 2 windows (instances) of it open in 2 different virtual desktops, this behavior did not happen. I clicked again, and nothing happened. Only one remained in focus. So I had to fo look for the second dolphin window the hard way. It looks like some apps are supported by this feature and some are not. How does one make it so that all applications are supported like this? This is a very handy feature. Is it a configuration item somewhere? thanks

    Read the article

  • Tool to annotate pictures (screenshots) for documentation purposes?

    - by René Nyffenegger
    Long time ago, I saw someone use a software (on Windows) that was specifically created to annotate pictures. It made it simple to add arrows, boxes, circles in "outstanding" colors to the image. Unfortunatly, I don't remember what program that was. Now, I have to document a GUI and I'd like to use this software in order to annotate screenshots of the software so that I can show the order of flow and dependencies between various aspects of the GUI. I'd be very happy if someone could point me into the right direction.

    Read the article

  • Oracle 11g network configuration

    - by Kylo
    I installed Oracle 11g Enterprise Edition on my Windows 7 Pro. My problem is that I cannot log into database from other host (local network). When I connect to database using Oracle SQLdeveloper everything is ok as long as I specify 'localhost' in connection configuration. However, when I change it to '192.168.0.190' which is my host IP address I get 'The Network Adapter could not establish the connection'. I get the same error when logging in from other host in local network. What is the problem?

    Read the article

  • How to refactor while keeping accuracy and redundancy?

    - by jluzwick
    Before I ask this question I will preface it with our environment. My team consists of 3 programmers working on multiple different projects. Due to this, our use of testing is mostly limited to very general black box testing. Take the following assumptions also: Unit Tests will eventually be written but I'm under strict orders to refactor first Ignore common Test-Driven Development techniques when given this environment, my time is limited. I understand that if this were done correctly, our team would actually save money in the long-term by building Unit-Tests before hand. I'm about to refactor a fairly large portion of the code that is critical. While I believe my code will accurately work when done and after our black box testing, I realize that there will be new data that the new code might not be able to handle. What I wanted to know is how to keep old code that functions 98% of the time so that we can call those subroutines in case the new code doesn't work properly. Right now I'm thinking of separating the old code in a separate class file and adding a variable to our config that will tell the program which code to use. Is there a better way to handle this? NOTE: We do use revision control and we have archived builds so the client could always revert to a previous build, but I would like to see if there is a decent way of doing this besides reverting. I want this so they can use the other new functionality delivered in the new build. Edit: While I agree I will need to write Unit Tests for this, I don't believe I will capture everything with them. I'm looking for ways to easily be able to revert to the old, functional code should anything happen. While I know this is a poor practice, I'm planning on removing this code after our team can guarantee that the new code works to the same standards as the old.

    Read the article

  • LWJGL Text Rendering

    - by Trixmix
    Currently in my project I am using LWJGL and the Slick2D library to render text onto the screen. Here is a more specific example: Font f = new Font("Times New Roman",Font.BOLD,18); font = new UnicodeFont(f); font.getEffects().add(new ColorEffect(Color.white)); font.addAsciiGlyphs(); try { font.loadGlyphs(); } catch (SlickException e) { e.printStackTrace(); } then i use font.drawString to write onto the screen. This is a quick easy way but it has a lot of disadvantages. for example font.loadGlyphs take a very long time 1-3 seconds. so when i want to change a color or font type then i have to wait 1-3 seconds which means I cannot do it while rendering (ie. cant have different color text on the same screen). My question is what is a better way of drawing multicolored text onto the screen? I use slick2d only for the text rendering so maybe i can fully get rid of the library and draw text some other way... If you have an answer please leave a quick short example. Thanks!

    Read the article

  • Why does Google Reader use up so much memory?

    - by Ivo
    I'm running the dev version of Chrome and just found out I could see the memory usage of every tab (press shift + ESC to find out yourself). Turns out the Shockwave Flash plugin uses 240 MB of memory and 27% of CPU while having open Google Reader. Killing this page brings it down to 50 MB. I reckon it builts up after reading through about 100 feeds. So my question is: why does it take up so much memory and what should I do to diminish it? Why I care? I often don't restart my browser (or laptop for that matter) and keep the Google Reader tab open for long periods of time. The memory does start to add up that way. Plus I have the feeling, perhaps incorrect, that it slows things down as well looking at the CPU usage. Side note: using Chrome 4 on Windows 7 (32 bit)

    Read the article

  • How to lock Firefox tab to domain or URL pattern

    - by f3lix
    I know Firefox extensions that allow protecting (cannot be closed) and locking (cannot change URL) tabs. What I need is an extension that locks a tab to a certain domain or URL pattern. For example, I want to lock a tab to the domain example.com. As long as I follow links that are within this domain the tab should show normal (unlocked) behavior, but if I follow a link to another domain the link should be opened in new tab -- leaving the locked tab open with a URL within the locked domain. Even better would be the functionality to lock a tab to a URL pattern. If a URL matches the pattern it is opened in the current tab, otherwise it is opened in a new tab. Do you know something (preferably an extension for FF 8.0) that provides this kind of functionality.

    Read the article

  • reduce timeout when connecting to wrong IP (XP-XP, windows explorer)

    - by Viki
    I have many shortcuts in the form \10.0.0.123\path in Windows Explorer (XP). Some of the IPs are sometimes dead (those vmware machines that are inactive). The problem is, when I try to open "Properties" on such shortcut (to correct the IP, or to delete it), Windows Explorer freezes for minutes. For very long time. Start menu freezes, too. This is very inconvenient. How can I reduce the windows explorer timeout when it is probing the connection to another XP share ?

    Read the article

  • dns update frequency

    - by Roderik
    I was looking after the frequency of dns updates, since I had to change the location fo the vps that hosts the domain contents. What I ussualy read is that it takes up to 72 hours to get these changes propagated, sometimes this can be sooner based on your location. I changed the nameservers for the domain vasco-da-gama.nl about a week ago. When I ping the domain name from different locations it still points the old vps (which does not exist anymore). I was wondering if its normal that it can take this long for the change to point my new vps? If I might have done something wrong here, where should I look for it (it looks all ok, when I check it). If it is reachable from your location (if so, its probably a matter of time it will propagate to my location).

    Read the article

  • TotalPhase Aardvark driver's GPL license

    - by Philip
    I'm using an SPI host adapter for a project. The Aardvark from TotalPhase. And I did something crazy, I read that EULA license that everyone just clicks through. The driver installation license includes these bits: This driver installer package also includes a WIN32 driver that is entirely based on the libusb-win32 project (release 0.1.10.1). ... LICENSE: The software in this package is distributed under the following licenses: Driver: GNU General Public License (GPL) Library, Test Files: GNU Lesser General Public License (LGPL) Now, my understanding of of the GPL is that it's sticky and viral. If you include software then the whole project has to be released under the GPL (if you distribute it, you can do whatever you want with in-house projects). If the driver was like the library, and was licensed under the LGPL, it could be used by my closed source proprietary project, as long as it's source and license was passed along with it. But it's not, it's pure GPL. If I include this driver in my project and distribute it, am I required to release my project under the GPL?

    Read the article

  • How should Code Review be Carried Out?

    - by Graviton
    My previous question has to do with how to advance code review among the developers. Here I am interested in how the code review session should be carried out, so that both the reviewer and reviewed are feeling comfortable about it. I have done some code review before, but the experience sucks big time. My previous manager would come to us-- on an ad hoc basis-- and tell us to explain our code to him. Since he wasn't very familiar with the code base, I spent a huge amount of times explaining just the most basic structure of my code to him. This took a long time and by the time we were done, we were both exhausted. Then he would raise issues with my code. Most issues he raised were cosmetic in nature ( e.g, don't use region for this code block, change the variable name from xxx to yyy even though the later makes even less sense, and so on). We did this a few rounds, and the review session didn't derive much benefits for us, and we stopped. What do you have to do, in order to make code review a natural, enjoyable, thought stimulating, bug-fixing and mutual-learning experience?

    Read the article

  • Is there a LOGO interpreter that actually has a turtle?

    - by Tim Post
    This is not a repeat of the now infamous "How do I move the turtle in LOGO?" Recently, I had the following conversation with my five year old daughter: Daughter: Daddy, do you write programs? Me: Yes! Daughter: Daddy, what's a program? Me: A program is a set of instructions that a computer follows. Daughter: Daddy, can I write a program too? Me: Sure! This got me scrambling to think of a very basic language that a five year old could get some satisfaction from mastering rather quickly. I'm ashamed to admit that the first thing that came to mind was this: 10 INPUT "Tell me a secret" A$ 20 PRINT "Wow really? :" A$ 30 GOTO 10 That isn't going to hold a five year old's attention for very long and it requires too much of a lecture. However, moving a turtle around and drawing neat pictures might just work. Sadly, my search for a LOGO interpreter yielded noting but ad ridden sites, flight simulators and a whole bunch of other stuff that I really don't want. I'm hoping to find a cross platform (Java / Python) LOGO interpreter (dare I call it simulator?) with the following features: Can save / replay commands (stored programs) Has an actual turtle Sound effects are a plus Have you stumbled across something like this, if so, can you provide a link? I hate to ask a 'shopping' sort of question, but it seemed much better than "Is LOGO appropriate for a five year old?"

    Read the article

  • What is the best free software to learn touch-typing?

    - by gojira
    What is the best free software to learn touch-typing? Features it needs to have: should NOT display the keyboard layout on the screen! should give detailed statistics which actually measure progress (for which key do I have the highest error rate, graphs showing how typing speed improved over time, etc) should enable me to actually learn touch-typing in about one long weekend were I don't do much else than learning to touch-type. it would be very good if it were possible to load a text-file and the program will use words from the text-file for the exercises as well My goals are: at least same typing speed as I have now but which touch-typing, want to be able to look at the screen only when typing P.S.: EDIT: I forgot to mention, I'm using Win 7. And I know what the Dvorak and Colemak keyboard layouts are, but I'm not interested in them. My question was with respect to standard US keyboard layout.

    Read the article

  • Dual boot Windows 7 with Windows 8- Dynamic Disk

    - by MeetM
    Its a long explanation. I have a HP Pavilion dm4 notebook. It has pre installed Windows 7 Home Pre. Recently, I tried to install Windows 8 developer preview on my notebook, but while installing, it only allowed me to insatll it on my primary Windows 7 drive I.e. drive C. I had kept 1 empty partition for Windows 8 but when I selectced that option, the next button at the bottom of the window just grey with some error saying Windows cannot boot from this drive....blah blah blah So I googled and found another way of doing it by VHD(virtual hard disk). This seemed to work but on restarting gave me "VHD_BOOT_INITIALIZATION_FAILED" error. After trying all possible ways for around 10 times, I gave up. I noticed that d only thing difference in d tutorials and my notebook is the Disk type. They all had Basic and I have Dynamic. Is that the reason m not able to boot Windows 8? Any suggestions?

    Read the article

  • A Trip to the Moon (Le Voyage dans la Lune) [Super Retro Classic Sci-Fi Video]

    - by Asian Angel
    If you are into retro sci-fi movies, then you will definitely want to have a look at this French classic from 1902. This silent movie is only 10.5 minutes long, but is well worth watching and makes for a fun romp through the early days of sci-fi. From YouTube: A Trip to the Moon (French: Le Voyage dans la lune) is a 1902 French black and white silent science fiction film. It is loosely based on two popular novels of the time: From the Earth to the Moon by Jules Verne and The First Men in the Moon by H. G. Wells. The film was written and directed by Georges Melies, assisted by his brother Gaston. The film runs 14 minutes if projected at 16 frames per second, which was the standard frame rate at the time the film was produced. It was extremely popular at the time of its release and is the best-known of the hundreds of fantasy films made by Melies. A Trip to the Moon is the first science fiction film, and utilizes innovative animation and special effects, including the iconic shot of the rocketship landing in the Moon’s eye. A Trip to the Moon / Le Voyage dans la lune – 1902 [via 20 best designs in sci-fi movies - Page 3 (Creative Bloq)] How to Use an Xbox 360 Controller On Your Windows PC Download the Official How-To Geek Trivia App for Windows 8 How to Banish Duplicate Photos with VisiPic

    Read the article

  • Rebuilding /etc/rc?.d/ links

    - by timday
    A regular filesystem check on a Debian Lenny system triggered an fsck, and that nuked a handful of links in the /etc/rc?.d hierarchy (unfortunately I didn't keep a list). The system seems to boot and run normally, but I'm worried its storing up trouble for the future. Is there an easy (fairly automatic) way of rebuilding this piece of the system ? As I understand it, the links are generally manipulated by package postinst scripts using update-rc.d (and I haven't made any changes from the installed defaults). Without any better ideas, my plan is one of: Diff a listing with another similar system to identify which packages need their links repairing. Wait until the system is upgraded to Squeeze (hopefully not too long :^) and assume the mass package upgrade will restore all the missing links.

    Read the article

  • GIS-based data visualization and maintenance tool

    - by Dave Jarvis
    Background Looking to leverage an existing GIS system for exploring organizational data. Architecture The following figure represents a high-level overview of the system's desired features: The most basic usage would be as follows: The user visits a web site. The system presents a map (having regions, cities, and buildings). The user drills-down on the map to a particular building. The system provides a basic CRUD interface. The user can view and modify information about personnel (e.g., their assigned teams), equipment (e.g., network appliances), applications, and the building itself (e.g., contact and phone numbers). Ideally, all the components should be open-source (or otherwise free). Problem This must be a small project that needs a quick (but functional) prototype, mostly to confirm whether or not such a system would be useful in the long term. Questions What software components would you use to quickly develop a working prototype? What open-source solutions already exist, if any? Ideas Here is what I am thinking: PostGIS - Define the regions, cities, and sites Google Maps - Display an interactive, clickable map geoJSON - Protocol between PostGIS and Google Maps Seam - CRUD interface Custom Development For example, this would entail: Installation and configuration Configure SSH for remote logins Subversion (or git) PostgreSQL PostGIS Java Tomcat Seam JasperReports Enter GIS information into PostGIS Aggregate data sources into PostgreSQL database Develop starting page for map interface Develop clickable Google Maps interface Develop summary reports Develop CRUD interface using Seam for data maintenance Surely something like this already exists? Thank you!

    Read the article

  • How to install SIP+PyQt with apt-get + pip + virtualenv?

    - by kjo
    [I originally posted this question, under a different title, in StackOverflow (here), but later I realized that my problem is very specific to apt-get, hence I am re-posting it here. Sorry for the duplication.] I'm trying to install PyQt on Ubuntu (and within a virtualenv). The list of obstacles I'm dealing with is far too long to include here, but the one I'm currently trying to get past is this: % workon myvenv (myvenv)% cd ~/.virtualenvs/myvenv/build/pyqt (myvenv)% python ./configure.py Traceback (most recent call last): File "./configure.py", line 32, in <module> import sipconfig OK, so let's install sipconfig... (myvenv)% pip install SIP Downloading/unpacking SIP Downloading sip-4.14.8-snapshot-02bdf6cc32c1.zip (848Kb): 848Kb downloaded Running setup.py egg_info for package SIP Traceback (most recent call last): File "<string>", line 14, in <module> IOError: [Errno 2] No such file or directory: '/home/yt/.virtualenvs/myvenv/build/SIP/setup.py' Complete output from command python setup.py egg_info: Traceback (most recent call last): File "<string>", line 14, in <module> IOError: [Errno 2] No such file or directory: '/home/yt/.virtualenvs/myvenv/build/SIP/setup.py' ---------------------------------------- Command python setup.py egg_info failed with error code 1 in /home/yt/.virtualenvs/myvenv/build/SIP Storing complete log in /home/yt/.pip/pip.log The only recipe I've found so far installing SIP is this % python configure.py % make % sudo make install ...but this recipe goes against my policy of doing all my Ubuntu installations either through apt-get (or through pip in the case of Python modules). Is there some way that I can install SIP with apt-get (and possibly pip)?

    Read the article

  • How to solve Microsoft Office error 1402 on Windows 7?

    - by yihang
    I have installed Microsoft Office on my new Windows 7 64-bit system. Recently, it encounter some error and i tried to re-install it. It wa\sn't successful. So, I have to use Microsoft Install Clean Up to uninstall Microsoft Office. When I tried to install it back, I received this message: Microsoft Office 2007 encountered an error during setup. Error 1402. Setup cannot open the registry key. {a bunch of long keys}. Verify that you have sufficient permissions to access the registry or contact Microsoft Product Support Service for assistance. For information about how to contact PSS, see {a *chm file}. After that, I tried to run the setup as admin but I ended up woth the same error. So, what should I do to solve this problem?

    Read the article

  • MySQL replication not working on leap day

    - by danneth
    Though out of my "core" knowledge I maintain a two-way replicated MySQL database (primary and backup). It's been working fine mostly. All changes are almost instantly replicated between the two servers. But now I've noticed something strange: I have a couple of cases where there are no replication on feb 29th. Admittedly I have not yet confirmed that all replication is lost. But all cases I've found so far have had this issue. Not too long ago I changed timezone from UTC to CET on the backup, it has been CET on the primary all along. Am I fixating on this because it happened on the leap day, or could there be something to it? The servers are both CentOS 5.4 with MySQL 5.0

    Read the article

  • Graphics card failure, anything I could try...

    - by ILMV
    My gaming PC has decided to die, it's not the first time but usually a quick ATX reset brings it back to life. Today it didn't. I disconnect all unessasary devices so I've only got the case button / LED cables, GPU, CPU, RAM and power connected, the computer still didn't turn on. I've not got a speaker on my motherboard so found a spare one I have for testing and when the machine starts up I get one long beep and two short beeps from my Award BIOS, which apparently means a video card error. I change it with the GPU from another machine and all works well. Q: So I have a faulty graphics card (an nVidia 8800GT OC), is there anything I can try to resurect it?

    Read the article

  • Where to download the lastest Windows ISO (legally)?

    - by Doon
    I have the dreamspark MS license. However, everytime I have to install Windows on my PC, I get many updates and this process is long and boring. Is there any way to download the lastest Windows ISO with updates? I'm trying to install Windows 7 (but Windows 8 would also be helpful). Note: I don't want just download windows. I want to download the OS with the lastest updates, those that are downloaded with Windows update after installing it!! Thanks!

    Read the article

  • How to connect to internet using huawei E303C datacard

    - by Rahul Choudhary
    It is very difficult to use ubuntu. After six hours of research on various websites and ubuntu blogs I was unable to connect to internet using my Huawei DataCard E303C. I wonder that if it takes so much long time to figure out how to connect to internet using a 3g datacard (Huawei E303C) to connect to internet, then how would I do my daily computing tasks using ubuntu. Is there anyone who can help me with that. My personal practical experiences says that using ubuntu instead of windows is not different but tough. Yes it is very tough to use ubuntu. Why it cannot be like we double click and software gets installed as it happens in windows and why we always have to use terminal to install everything. Why everything in ubuntu is very difficult and tough to accomplish. I am drifting away from ubuntu. Can any developer at ubuntu help keep my interest in ubuntu? Is there anyone who can lure me to use ubuntu again?

    Read the article

< Previous Page | 295 296 297 298 299 300 301 302 303 304 305 306  | Next Page >