Search Results

Search found 40310 results on 1613 pages for 'two factor'.

Page 30/1613 | < Previous Page | 26 27 28 29 30 31 32 33 34 35 36 37  | Next Page >

  • Utilize two gateways on the same network same interface with load balancing

    - by RushPL
    My setup is two ISPs on a single interface and single network. I can either set my default gateway to 192.168.0.1 or 192.168.1.250 and either work. My desire is to utilize both of them with some load balancing. I have tried to follow the advice given in here http://serverfault.com/a/96586 #!/bin/sh ip route show table main | grep -Ev '^default' \ | while read ROUTE ; do ip route add table ISP1 $ROUTE done ip route add default via 192.168.1.250 table ISP1 ip route add default via 192.168.0.1 table ISP2 iptables -t mangle -A PREROUTING -j CONNMARK --restore-mark iptables -t mangle -A PREROUTING -m mark ! --mark 0 -j ACCEPT iptables -t mangle -A PREROUTING -j MARK --set-mark 10 iptables -t mangle -A PREROUTING -m statistic --mode random --probability 0.5 -j MARK --set-mark 20 iptables -t mangle -A PREROUTING -j CONNMARK --save-mark Now then I do "traceroute somehost" repeatedly I can only get route through my default route which is 192.168.1.250. Shouldn't the packets change routes in a random manner? How to debug it?

    Read the article

  • Single Exchange 2007 server - two AD domains

    - by TheCleaner
    CURRENT: single domain, single Exchange 2007 NEW: two domains, single Exchange 2007 Can this be done? Details: Current setup is a single W2k3 domain with a single Exchange 2007 server. We are merging with another company that currently hosts their email with their ISP via POP3. We'd like to start hosting their email on our Exchange server using their existing domain SMTP addresses. They don't have an AD domain at all at the moment. Recommendations? Can I do this with a trust between the 2 domains? Requirements: They can't have multiple SMTP addresses on both domains...such as I've seen with articles pointing to "hosting multiple domains". I want companyA to have the same account settings they've always had...companyB to have the same SMTP address they've had and not an additional one on the current companyA Exchange domain. They should be able to collaborate (calendar, contacts, GALs) but should still be distinguishable based on which company they "work for". Please help...thanks!

    Read the article

  • Parity Initialization after putting in two new disks

    - by lbanz
    All my firmware is up to date on the server and the controllers. Storage crashed over the weekend. I rebooted it and it detected that I put in two new disks last week (I did check that both disk completed the rebuilding process last week). After it booted into the OS I see that it gave me an information message. After 18 hours it is at 54% so it is looking healthy. But I need to replace 5 more disk in the msa. Should I wait for this message to finish before replacing more disks? 785 Background parity initialization is currently queued or in progress on Logical Drive 1 (15.0 TB, RAID 5). If background parity initialization is queued, it will start when I/O is performed on the drive. When background parity initialization completes, the performance of the logical drive will improve.

    Read the article

  • Can't find second partition on encrypted drive with two partitions

    - by Thomas Uhrig
    I have a drive with two partitions, a system partition (Windows 7) and a partition just for data. Both are encrypted with the same password. I didn't had any problems, but yesterday my laptop gets broken. Now, I'm trying to connect the drive via USB to a new laptop and read it. The problem is, that I only see the system partition, not the one with my data. When I click on "Select Device", I can see my drive as "Harddisk 1" with 300 gb. But I only see a single partition "Partition1" with 117 gb. I'm unable to find the second one. It's not a hidden partition. Any ideas? Thanks.

    Read the article

  • Two Routers, Two Internet (1 Open, 1 PPTP) - Routing?

    - by SomeUser
    Hi there, I'm trying to setup two routers - one to route specific sites to a always-on PPTP VPN connection, the other for open internet access w/ firewall. First router is connected to Internet w/ built-in firewall. Second router is connected to a PPTP VPN connection. I was going to connect a wire between the routers and would like some insight on how to get both groups of systems (connected to each router) to talk between automatically. Even better would be to setup one gateway for certain sites and another for general Internet. The other option is to default all sites to the net and shoot others to the gateway or vice versa... Any insight so I can get a better grasp of this? Thanks!

    Read the article

  • SSL Certificates, two-way authentication and loadbalancers

    - by 5arx
    We're looking to implement two-way authentication with client certificates for a privileged subset of our application users. The idea will be that if a certificate is detected the user will be asked for an additional password/PIN and that will be used to verify the certificate and user. Ordinary users will continue to authenticate themselves via the standard login mechanism. Our production environment (hosted by a well-known company) comprises load-balanced application servers and I'm unclear as to how this set-up will handle the certificates and I'm not certain if there are any pitfalls I should be aware of. I would very appreciate some thoughts, comments or real-world advice on the subject.

    Read the article

  • Slow Web Performance on two Windows 2008 R2 Terminal Servers

    - by Frank Owen
    We have two Windows 2008 R2 servers that we use for agents to log into to access our customers systems. Saturday morning we received complaints that on both servers the web is running horribly slow. This happens on all websites and the majority of the time the web site times out trying to load. Other users located at the same site but using their desktop machine do not see any issue. We have rebooted the boxes and checked settings and cannot find the cause. The CPU/Memory/Network/Disk Space use on the server is very low. I thought it might have been a MS update causing the issue but it appears the last update was applied in January. We have rebooted both boxes and I am in process of trying a different browser. Any ideas what could be causing this?

    Read the article

  • Sync files between two users on Windows-7 Enterprise

    - by Zachary
    I'm running Windows-7 enterprise on a dell Laptop, and I'd like to sync the entire user directory structure between two users. Background: I am an existing user on the computer, and soon I'll be sharing the computer with an employee. I want everything from my account to overwrite the other, while anything he does is mirrored on mine. I'm not worried about security because nothing vital is on the computer. Both accounts are administrators, and I have already tried to use hard links to accomplish this. However the prompt leaves me with "Access Denied". Is what I'm trying to do possible, and if so what steps must be done to accomplish it?

    Read the article

  • VMware two vSwitches Guests can't communicate between them

    - by Aaron R.
    I have some servers in this configuration: And I am not able, from VMGuest1, to ping either VMGuest3 or VMGuest4. I can, however, ping Host1 and Host2, which are attached to pSwitch1. The behavior is the same with VMGuest3 or 4 trying to ping VMGuest 1 or 2. I don't have promiscuity enabled for any of these switches, nor do I have a bridge set up inside ESXi for the virtual switches. I know that one of these options is usually necessary when trying to get connectivity between two virtual switches. These switches are connected, however, through their respective physical switches which are bridged together. Ping just times out, arp request looks like this: [root@vmguest1:~]# arp -a vmguest3 vmguest3.example.com (1.2.3.4) at <incomplete> on eth0 [root@vmguest1:~]# arp -a host1 host1.example.com (1.2.3.5) at 00:0C:64:97:1C:FF [ether] on eth0 VMGuest1 can reach hosts on pSwitch1, so why can't it get to hosts on vSwitch1 through pSwitch1 the same way?

    Read the article

  • RAID 1 after install and two controlers

    - by jfreak53
    I have question regarding RAID 1. Can I setup software RAID 1 after having installed the first drive and setup ubuntu 12? I know that during server install and partitioning I can select RAID and setup then, but what I am not clear on is how in the world to setup RAID 1 after the fact? Can someone provide directions for this? Also, can I RAID 1 two drives one being 500GB and the mirror drive being 1TB? Of course the mirror drive would have a 500GB partition but that's my point. Lastly, can one drive be on IDE and the other on a SATA controller? I know speed will be an issue, that doesn't matter, I just need to know if it will work without corrupting data and if it's the same process? Thanks.

    Read the article

  • Debugging Connection Issues Between Two Linux Servers

    - by clickfault
    I have two CentOS 5 servers running iptables and apf. I am having issues connecting with ssh from server 1 to server 2. I can connect from server 1 to a third server and from that third server to both 1 and 2. In all cases I am using the IP address and not a host name. I have stopped iptables and apf on all servers and it doesn't seem to change anything. What is the best way to debug this process?

    Read the article

  • Fix two-finger Trackpad Scrolling on a Macbook running Bootcamp

    - by roryok
    This is an issue that's annoyed me for some time. About a year ago, the two-finger scrolling in Windows 7 on my Macbook Pro stopped working. I discovered that a fix for this is to open Bootcamp from the control panel, go to the Trackpad tab, tick and untick "Tap to click" and click ok. This has to be done every time the machine is woken from sleep or rebooted. I'm now using Windows 8 and encountering the same issue. I've tried several different driver revisions, and none have helped. I'm sick of going through the motions. Has anyone got a solution for this?

    Read the article

  • Latex two captioned verbatim environments side-by-side

    - by egon
    How to get two verbatim environments inside floats with automatic captioning side-by-side? \usepackage{float,fancyvrb} ... \DefineVerbatimEnvironment{filecontents}{Verbatim}% {fontsize=\small, fontfamily=tt, gobble=4, frame=single, framesep=5mm, baselinestretch=0.8, labelposition=topline, samepage=true} \newfloat{fileformat}{thp}{lof}[chapter] \floatname{fileformat}{File Format} \begin{fileformat} \begin{filecontents} A B C \end{filecontents} \caption{example.abc} \end{fileformat} \begin{fileformat} \begin{filecontents} C B A \end{filecontents} \caption{example.cba} \end{fileformat} So basically I just need those examples to be side-by-side (and keeping automatic nunbering of caption). I've been trying for a while now.

    Read the article

  • Ways to do simple failover with one server and two IPs

    - by CrassHoppr
    The setup is one server (Windows 2008) at one location with two incoming connections. As the server has to interface with various on-site devices, and will have a small number of incoming connections, a data center is not an option, and instead cable/dsl connections must be used. The goal is that users visit https://service.site.com and are sent to either the primary IP address or a secondary IP if the primary is down. I've seen advice to use round robin DNS for this, but caching an IP for a downed interface is something I'd like to avoid. Is something like this possible with these constraints?

    Read the article

  • Do two portforward rules translate to "and"?

    - by blsub6
    I just set up an Exchange server to replace my DeskNow mail server. I want to start testing my internet mail exchange of my Exchange server. I can only set the MX records on my DNS up to my one external IP address so I was thinking that I could set up a firewall rule on my internet-facing firewall that port forwarded the smtp packets to two different servers. My question is: If I do that, will that mean that the smtp packets will be forwarded to just the first internal IP on the list? Or does it mean that the packet will be cloned and sent to both IPs?

    Read the article

  • Bridging two connections in windows 7

    - by Serban Razvan
    I have recently bought an Samsung UE32ES5500 and I want to connect it to the internet. Not wanting to buy an expensive Samsung wireless adapter for the TV, I've decided to use an ethernet cable. Because the Internet cable passes through underground to the bedroom and the TV is located in the living room, i decided to put a router in the bedroom, and receive it's signal in the living room using a windows 7 laptop. Afterwards I connected the laptop to the TV through an ethernet cable, and bridged the two connections in Network Connections in Control Panel on the laptop. The TV successfully finds the laptop (and the router I think) but still cannot connect to the internet. Does anyone knows a solution to this problem? (the connections must be bridged because I want to have only one network in the house)

    Read the article

  • switch duplicates packets and forward in two route

    - by sami
    there is a network including a router, two hosts and a switch which connects hosts to router. i have a virtual machine on my system. the network adapter is set to act as bridge. so the virtual machine and real OS are my 2 hosts on different LAN. they use one network card and are connected to a switch. when each of host send a packet to the other one, the switch duplicate the packet and forward it to both router and the other host. how can I solve the duplicate packet problem? Thanks.

    Read the article

  • Two domains hosted on the same server with different root folder shows up the same homepage

    - by emaillenin
    I have hosted two domains from GoDaddy at Linode VPS. They are mobiletoast.com and lesseltechnologies.com Thought the latter site has a separate index folder, whenever I navigate to it, I get the homepage of mobiletoast.com The strange thing is, I see the expected page (It works), when I open the site from my mobile phone. But when I open the site from my PC (any browser, without any cache, hard refresh), I get the homepage of mobiletoast.com The Linode support team says, they see the correct "It works" page. But I am not able to see that page. This is the output of the command apache2ctl -S root@li339-83:~# apache2ctl -S VirtualHost configuration: wildcard NameVirtualHosts and _default_ servers: *:80 is a NameVirtualHost default server mobiletoast.com (/etc/apache2/sites-enabled/000-default:1) port 80 namevhost mobiletoast.com (/etc/apache2/sites-enabled/000-default:1) port 80 namevhost blog.mobiletoast.com (/etc/apache2/sites-enabled/blog.mobiletoast.com:1) port 80 namevhost lesseltechnologies.com (/etc/apache2/sites-enabled/lesseltechnologies.com:1) port 80 namevhost mobiletoast.com (/etc/apache2/sites-enabled/mobiletoast.com:1) Syntax OK

    Read the article

  • VLC - Play two mp3s simultaneously from command line

    - by raoulcousins
    I'm using VLC 2.0.8 on Windows 7. How do I play two mp3s simultaneously from the command line (command line because to write a batch script that launches the mp3s)? I've tried vlc 1.mp3 2.mp3 and vlc 1.mp3 --input-slave 2.mp3 (I've seen the second one as a way to play a video file and a separate audio file simultaneously). Both of these just launch 1.mp3. Not important, but if you're wondering, the mp3s are respectively cafe sounds and rain sounds, so I can play sounds similar to those found at http://rainycafe.com/ without having to launch a browser.

    Read the article

  • Routing between two VLANs on Single Dell 6200 Switch

    - by jenglee
    I want to be able to route between two vlans that I have created and I am not sure how to go about it. So I have created, VLAN 5 with IP Address 192.168.5.1/24 and VLAN 10 with IP Address 192.168.0.1/24 //main IP addresses that I use. How would I be able to get (for example) the IP Address 192.168.0.144 to see any ip addresses in 192.168.5.1/24? Also do you have to set a default gateway for each VLAN or do you set the default gateway for the switch.

    Read the article

  • Google and Gmail only work on one laptop and not the other two

    - by Becca
    We have Comcast internet and everything was fine until recently. I am currently using my father-in-law's PC, and Gmail, Paypal, and Google all work fine. They don't work on my laptop or my husband's. We've reset the router/modem several times and nothing works. So we unplugged the main line outside and it fixed it for two weeks but now it's back to being stupid again. We've tried everything else and nothing seems to work. Any ideas?

    Read the article

  • Install Linux with two hard drives

    - by rdecourt
    I've a machine with two hard drives. The first one has 80 GB and the second has 120 GB. I'm about to format this machine and install Linux, and I want to install all the main partitions (/, /boot, /usr/, etc.) on the first hard disk drive (sda) and mount the /home and /var partition on second disk (sdb). Is this possible, and do I have to do something after the instalation? Or is the second hard disk drive automatically mounted? How can I do it? I won't do it, but is there any problem to mount /boot on the second hard disk drive? I'm using Ubuntu 12.04.

    Read the article

  • two identical broadband lines working as one

    - by Katafalkas
    I have been trying to find an answer to this, but all I get is hobbyists trying to connect they linksys's and get some magic out of it. So I am thinking of a way I could combine two 100Mbp Fiber Optics lines into a single connection for our office. I assume it involves some CISCO learning or something like this. Was thinking that I might need to configure some big router to load-balance the NAT'ing in some way. I assume that meny of you have done something similar and maybe someone could share the knowledge or at least provide some tips ?

    Read the article

  • Apache - access two or more virtual hosts from outside

    - by André Alçada Padez
    I have an apache2 server running on my ubuntu system. I have two sites enabled: default (ServerName localhost) site2 (ServerName jslib) I run a windows Virtual Box Machine, to be able to test my stuff in IE. If i type the ubuntu's IP in the addressbar i get the localhost. I was wondering how can i access both (or more as i need it) from other machines. Thanks update I have configured the windows' hosts file like so: 10.0.2.2 localhost 10.0.2.2 jslib It works, but i am really looking for something that i can configure on the server side, and then just change the value of the URL, am i crazy?

    Read the article

  • Comparing two strings in excel, add value for common variables

    - by overtime
    I'm comparing two large datasets containing strings in excel. Column A contains the numbers 1-1,000,000. Column B contains 1,000,000 strings, neatly organized in the desired order. Column C contains 100,000 randomly organized strings, that have identical values somewhere in column B. Example: A B C D 1 String1 String642 2 String2 String11 3 String3 String8000 4 String4 String78 What I'd like to do is find duplicate values in columns B and C then output the Column A value that corresponds with the string in Column C into Column D. Desired Output: A B C D 1 String1 String642 642 2 String2 String11 11 3 String3 String8000 8000 4 String4 String78 78

    Read the article

< Previous Page | 26 27 28 29 30 31 32 33 34 35 36 37  | Next Page >