Search Results

Search found 8298 results on 332 pages for 'laptop'.

Page 300/332 | < Previous Page | 296 297 298 299 300 301 302 303 304 305 306 307  | Next Page >

  • Internet slowed down because of SQUID Server setup

    - by Ranjith Kumar
    Recently I have setup a squid server for our office. I have computer (A) with two ethernet cards, one for internet and the second one for local networkIt has Ubuntu server OS with squid-server and dhcp3-server installedI have added few iptable rules to work like a router and redirect all http traffic to 3128 port This link is my reference. Everything worked fine for 2 days. All of a sudden internet speed went down drastically. When I connected the internet cable to my laptop to test the internet speed it was fine. Again when I reconnected it back to computer A everything was normal. This happened 4 times in a week. Could anyone here please help me why the internet speed is going down and it becomes normal when I reconnect the cable. EDIT: Rebooting the system (computer A) didn't make a difference. I have changed iptables so that http traffic doesn't redirect to 3128 port any further, still no change in the internet speed. I think the problem is not with squid but with something else. Here are my iptable rules SQUID_SERVER="10.1.1.1" INTERNET="eth1" LAN_IN="eth0" SQUID_PORT="3128" PROXYSERVERS=(Atlanta Baltimore Boston Chicago Dallas Denver Houston KansasCity LosAngeles Miami NewYork Philadelphia Phoenix SanAntonio SanDiego SanJose Seattle Washington) SERVERLEN=${#PROXYSERVERS[*]} I=0 iptables -F iptables -X iptables -t nat -F iptables -t nat -X iptables -t mangle -F iptables -t mangle -X modprobe ip_conntrack modprobe ip_conntrack_ftp echo 1 /proc/sys/net/ipv4/ip_forward iptables -P INPUT DROP iptables -P OUTPUT ACCEPT iptables -A INPUT -i lo -j ACCEPT iptables -A OUTPUT -o lo -j ACCEPT iptables -A INPUT -i $INTERNET -m state --state ESTABLISHED,RELATED -j ACCEPT iptables --table nat --append POSTROUTING --out-interface $INTERNET -j MASQUERADE iptables --append FORWARD --in-interface $LAN_IN -j ACCEPT iptables -A INPUT -i $LAN_IN -j ACCEPT iptables -A OUTPUT -o $LAN_IN -j ACCEPT while [ $I -lt $SERVERLEN ]; do iptables -t nat -A PREROUTING -i $LAN_IN -p tcp -d ${PROXYSERVERS[$I]}.wonderproxy.com --dport 80 -j ACCEPT let I++ done iptables -t nat -A PREROUTING -i $LAN_IN -p tcp --dport 80 -j DNAT --to $SQUID_SERVER:$SQUID_PORT iptables -A INPUT --protocol tcp --dport 80 -j ACCEPT iptables -A INPUT --protocol tcp --dport 443 -j ACCEPT iptables -A INPUT --protocol tcp --dport 22 -j ACCEPT iptables -A INPUT -j LOG iptables -A INPUT -j DROP

    Read the article

  • Restrict SSH user to connection from one machine

    - by Jonathan
    During set-up of a home server (running Kubuntu 10.04), I created an admin user for performing administrative tasks that may require an unmounted home. This user has a home directory on the root partition of the box. The machine has an internet-facing SSH server, and I have restricted the set of users that can connect via SSH, but I would like to restrict it further by making admin only accessible from my laptop (or perhaps only from the local 192.168.1.0/24 range). I currently have only an AllowGroups ssh-users with myself and admin as members of the ssh-users group. What I want is something that works like you may expect this setup to work (but it doesn't): $ groups jonathan ... ssh-users $ groups admin ... ssh-restricted-users $ cat /etc/ssh/sshd_config ... AllowGroups ssh-users [email protected].* ... Is there a way to do this? I have also tried this, but it did not work (admin could still log in remotely): AllowUsers [email protected].* * AllowGroups ssh-users with admin a member of ssh-users. I would also be fine with only allowing admin to log in with a key, and disallowing password logins, but I could find no general setting for sshd; there is a setting that requires root logins to use a key, but not for general users.

    Read the article

  • What is the fastest and best way to convert an rmvb video to mp4/mkv without losing any quality?

    - by Eric Leung
    the file will be played in a popbox3d. my old method was to convert the video using vidcoder (an offshoot of handbrake) using normal settings, but i've recently confirmed that this significantly reduces video and audio quality. i bumped up the conversion quality to 'high profile' and this produced a higher quality video but raised the conversion time to about twice the video length (95 minutes to convert a 45 minute video) on a core2duo laptop. this is less than ideal when a large number of videos need to be converted. i have tried a direct remuxing using mkv toolnix but this produced a video that refused to display video on the popbox3d, which is consistent with the reported: [quote=other old thread] it is possible to put RealMedia A/V in MKV container (used MKVtoolnix) - however, it is awkward to play later. RV40 is only suspected to be based on H.264 - simplify, is not consistent with MPEG-4 AVC specification. [/quote] i have read that ... [quote=from old thread] Under normal circumstances, [ffmpeg] should convert the video to .video.mp4 and the audio to (.wav then to) .audio.mp4, then mux the video and audio into a new .mp4 file and delete the temporary video-only and audio-only files.[/quote] and i am currently attempting to discover how this is done. help? PS: i download a lot of series from asia and for some strange reason, rmvb is a really popular format over there. sometimes, it's the only format that's available. unfortunately, it's a format that is incompatible with the popbox3d, so i have to convert the files before i can watch them on my tv.

    Read the article

  • Word 2013 can't compare readonly files

    - by Moshe Katz
    I am using Tortoise SVN to work with a repository that contains some documentation saved as Word documents. On my old computer, with Office 2010, I was able to compare with previous revisions. Tortoise would open Word in compare view so I could see the differences between the files. I have installed Office 2013 (final version from Technet, not the preview version) on my new laptop for testing and now I can no longer compare Word Documents. Tortoise pops up a generic error that it was unable to compare the two files. Tortoise uses a JScript file to interface with Word, so I ran that file through a debugger and found that the actual error is: The Compare method or property is not available because this command is not available for reading. Some Googling followed by some testing revealed that the error is caused by the first file opened (in this case, the previous version) being opened as Read-Only. If I change the JScript code to open in normal mode, and I find the file on the system and un-check the "Read Only" property (if necessary), then the comparison opens as expected. I was unable to find any documentation about this change to Word on any Microsoft site. Does anyone know why this has been changed, and if it is intentional and not a bug, what the benefit is of requiring the file to be writable in order to compare it with another? Note: This is tagged word-2013-preview but it is actually for the release version of Word that is available on MSDN and Technet. I do not have enough rep. on this site to create new tags (yet).

    Read the article

  • Slow network file transfer (under 20KB/s) on newly built x64 Win7

    - by Mangoshake
    I am getting <20KB/s for local network file transfer. If I transfer a very small file (less than 100KB) it would start quickly then slow down to <20KB/s. all subsequently network file transfer would be slow, a reboot is needed to reset this. If I transfer a large file it would be stuck on calculating for a long time and then begin with <20KB/s immediately. This is a newly built desktop running Windows 7 x64 SP1. Realtek gigabit LAN from the motherboard (ASRock Extreme3 gen3). Problematic speed is observed on the private LAN, both through ethernet and WiFi. The Router is D-Link DIR-655. Remote Differential Compression is off. Drivers are up-to-date from ASRock's website. I have tested network file transfer to and from another Windows 7 laptop and a MacBook Pro, so I am fairly certain it is the desktop's problem. The slow speed only happens with one direction also, outbound from the desktop, regardless of whether I initiate the file transfer action from the origin or the destination. Inbound network file transfer and internet speeds are fine, so I don't think this is a hardware issue. I am getting 74.8MB/s internet upload speed from speedtest.net (http://www.speedtest.net/result/1852752479.png). Inbound network file transfer I can get around 10-15MB/s. I am hoping this community has some insight for me to troubleshoot this. I don't see anything obviously related from the Event Viewer, and beyond that I just don't know where else to look. Any suggestions are greatly appreciated, thank you in advance.

    Read the article

  • UAC being turned off once a day on Windows 7

    - by Mehper C. Palavuzlar
    I have strange problem on my HP laptop. This began to happen recently. Whenever I start my machine, Windows 7 Action Center displays the following warning: You need to restart your computer for UAC to be turned off. Actually, this does not happen if it happened once on a specific day. For example, when I start the machine in the morning, it shows up; but it never shows up in the subsequent restarts within that day. On the next day, the same thing happens again. I never disable UAC, but obviously some rootkit or virus causes this. As soon as I get this warning, I head for the UAC settings, and re-enable UAC to dismiss this warning. This is a bothersome situation as I can't fix it. First, I have run a full scan on the computer for any probable virus and malware/rootkit activity, but TrendMicro OfficeScan said that no viruses have been found. I went to an old Restore Point using Windows System Restore, but the problem was not solved. What I have tried so far (which couldn't find the rootkit): TrendMicro OfficeScan Antivirus AVAST Malwarebytes' Anti-malware Ad-Aware Vipre Antivirus GMER TDSSKiller (Kaspersky Labs) HiJackThis RegRuns UnHackMe SuperAntiSpyware Portable Tizer Rootkit Razor (*) Sophos Anti-Rootkit SpyHunter 4 There are no other strange activities on the machine. Everything works fine except this bizarre incident. What could be the name of this annoying rootkit? How can I detect and remove it? EDIT: Below is the log file generated by HijackThis: Logfile of Trend Micro HijackThis v2.0.4 Scan saved at 13:07:04, on 17.01.2011 Platform: Windows 7 (WinNT 6.00.3504) MSIE: Internet Explorer v8.00 (8.00.7600.16700) Boot mode: Normal Running processes: C:\Windows\system32\taskhost.exe C:\Windows\system32\Dwm.exe C:\Windows\Explorer.EXE C:\Program Files\CheckPoint\SecuRemote\bin\SR_GUI.Exe C:\Windows\System32\igfxtray.exe C:\Windows\System32\hkcmd.exe C:\Windows\system32\igfxsrvc.exe C:\Windows\System32\igfxpers.exe C:\Program Files\Hewlett-Packard\HP Wireless Assistant\HPWAMain.exe C:\Program Files\Synaptics\SynTP\SynTPEnh.exe C:\Program Files\Hewlett-Packard\HP Quick Launch Buttons\QLBCTRL.exe C:\Program Files\Analog Devices\Core\smax4pnp.exe C:\Program Files\Hewlett-Packard\HP Quick Launch Buttons\VolCtrl.exe C:\Program Files\LightningFAX\LFclient\lfsndmng.exe C:\Program Files\Common Files\Java\Java Update\jusched.exe C:\Program Files\Microsoft Office Communicator\communicator.exe C:\Program Files\Iron Mountain\Connected BackupPC\Agent.exe C:\Program Files\Trend Micro\OfficeScan Client\PccNTMon.exe C:\Program Files\Microsoft LifeCam\LifeExp.exe C:\Program Files\Hewlett-Packard\Shared\HpqToaster.exe C:\Program Files\Windows Sidebar\sidebar.exe C:\Program Files\mimio\mimio Studio\system\aps_tablet\atwtusb.exe C:\Program Files\Microsoft Office\Office12\OUTLOOK.EXE C:\Program Files\Babylon\Babylon-Pro\Babylon.exe C:\Program Files\Mozilla Firefox\firefox.exe C:\Users\userx\Desktop\HijackThis.exe R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Search Page = http://go.microsoft.com/fwlink/?LinkId=54896 R0 - HKCU\Software\Microsoft\Internet Explorer\Main,Start Page = about:blank R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Default_Page_URL = http://go.microsoft.com/fwlink/?LinkId=69157 R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Default_Search_URL = http://go.microsoft.com/fwlink/?LinkId=54896 R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Search Page = http://go.microsoft.com/fwlink/?LinkId=54896 R0 - HKLM\Software\Microsoft\Internet Explorer\Main,Start Page = http://go.microsoft.com/fwlink/?LinkId=69157 R0 - HKLM\Software\Microsoft\Internet Explorer\Search,SearchAssistant = R0 - HKLM\Software\Microsoft\Internet Explorer\Search,CustomizeSearch = R1 - HKCU\Software\Microsoft\Windows\CurrentVersion\Internet Settings,AutoConfigURL = http://www.yaysat.com.tr/proxy/proxy.pac R0 - HKCU\Software\Microsoft\Internet Explorer\Toolbar,LinksFolderName = O2 - BHO: AcroIEHelperStub - {18DF081C-E8AD-4283-A596-FA578C2EBDC3} - C:\Program Files\Common Files\Adobe\Acrobat\ActiveX\AcroIEHelperShim.dll O2 - BHO: Babylon IE plugin - {9CFACCB6-2F3F-4177-94EA-0D2B72D384C1} - C:\Program Files\Babylon\Babylon-Pro\Utils\BabylonIEPI.dll O2 - BHO: Java(tm) Plug-In 2 SSV Helper - {DBC80044-A445-435b-BC74-9C25C1C588A9} - C:\Program Files\Java\jre6\bin\jp2ssv.dll O4 - HKLM\..\Run: [IgfxTray] C:\Windows\system32\igfxtray.exe O4 - HKLM\..\Run: [HotKeysCmds] C:\Windows\system32\hkcmd.exe O4 - HKLM\..\Run: [Persistence] C:\Windows\system32\igfxpers.exe O4 - HKLM\..\Run: [hpWirelessAssistant] C:\Program Files\Hewlett-Packard\HP Wireless Assistant\HPWAMain.exe O4 - HKLM\..\Run: [SynTPEnh] C:\Program Files\Synaptics\SynTP\SynTPEnh.exe O4 - HKLM\..\Run: [QlbCtrl.exe] C:\Program Files\Hewlett-Packard\HP Quick Launch Buttons\QlbCtrl.exe /Start O4 - HKLM\..\Run: [SoundMAXPnP] C:\Program Files\Analog Devices\Core\smax4pnp.exe O4 - HKLM\..\Run: [Adobe Reader Speed Launcher] "C:\Program Files\Adobe\Reader 9.0\Reader\Reader_sl.exe" O4 - HKLM\..\Run: [Adobe ARM] "C:\Program Files\Common Files\Adobe\ARM\1.0\AdobeARM.exe" O4 - HKLM\..\Run: [lfsndmng] C:\Program Files\LightningFAX\LFclient\LFSNDMNG.EXE O4 - HKLM\..\Run: [SunJavaUpdateSched] "C:\Program Files\Common Files\Java\Java Update\jusched.exe" O4 - HKLM\..\Run: [Communicator] "C:\Program Files\Microsoft Office Communicator\communicator.exe" /fromrunkey O4 - HKLM\..\Run: [AgentUiRunKey] "C:\Program Files\Iron Mountain\Connected BackupPC\Agent.exe" -ni -sss -e http://localhost:16386/ O4 - HKLM\..\Run: [OfficeScanNT Monitor] "C:\Program Files\Trend Micro\OfficeScan Client\pccntmon.exe" -HideWindow O4 - HKLM\..\Run: [Babylon Client] C:\Program Files\Babylon\Babylon-Pro\Babylon.exe -AutoStart O4 - HKLM\..\Run: [LifeCam] "C:\Program Files\Microsoft LifeCam\LifeExp.exe" O4 - HKCU\..\Run: [Sidebar] C:\Program Files\Windows Sidebar\sidebar.exe /autoRun O4 - Global Startup: mimio Studio.lnk = C:\Program Files\mimio\mimio Studio\mimiosys.exe O8 - Extra context menu item: Microsoft Excel'e &Ver - res://C:\PROGRA~1\MICROS~1\Office12\EXCEL.EXE/3000 O8 - Extra context menu item: Translate this web page with Babylon - res://C:\Program Files\Babylon\Babylon-Pro\Utils\BabylonIEPI.dll/ActionTU.htm O8 - Extra context menu item: Translate with Babylon - res://C:\Program Files\Babylon\Babylon-Pro\Utils\BabylonIEPI.dll/Action.htm O9 - Extra button: Research - {92780B25-18CC-41C8-B9BE-3C9C571A8263} - C:\PROGRA~1\MICROS~1\Office12\REFIEBAR.DLL O9 - Extra button: Translate this web page with Babylon - {F72841F0-4EF1-4df5-BCE5-B3AC8ACF5478} - C:\Program Files\Babylon\Babylon-Pro\Utils\BabylonIEPI.dll O9 - Extra 'Tools' menuitem: Translate this web page with Babylon - {F72841F0-4EF1-4df5-BCE5-B3AC8ACF5478} - C:\Program Files\Babylon\Babylon-Pro\Utils\BabylonIEPI.dll O16 - DPF: {00134F72-5284-44F7-95A8-52A619F70751} (ObjWinNTCheck Class) - https://172.20.12.103:4343/officescan/console/html/ClientInstall/WinNTChk.cab O16 - DPF: {08D75BC1-D2B5-11D1-88FC-0080C859833B} (OfficeScan Corp Edition Web-Deployment SetupCtrl Class) - https://172.20.12.103:4343/officescan/console/html/ClientInstall/setup.cab O17 - HKLM\System\CCS\Services\Tcpip\Parameters: Domain = yaysat.com O17 - HKLM\Software\..\Telephony: DomainName = yaysat.com O17 - HKLM\System\CS1\Services\Tcpip\Parameters: Domain = yaysat.com O17 - HKLM\System\CS2\Services\Tcpip\Parameters: Domain = yaysat.com O18 - Protocol: qcom - {B8DBD265-42C3-43E6-B439-E968C71984C6} - C:\Program Files\Common Files\Quest Shared\CodeXpert\qcom.dll O22 - SharedTaskScheduler: FencesShellExt - {1984DD45-52CF-49cd-AB77-18F378FEA264} - C:\Program Files\Stardock\Fences\FencesMenu.dll O23 - Service: Andrea ADI Filters Service (AEADIFilters) - Andrea Electronics Corporation - C:\Windows\system32\AEADISRV.EXE O23 - Service: AgentService - Iron Mountain Incorporated - C:\Program Files\Iron Mountain\Connected BackupPC\AgentService.exe O23 - Service: Agere Modem Call Progress Audio (AgereModemAudio) - LSI Corporation - C:\Program Files\LSI SoftModem\agrsmsvc.exe O23 - Service: BMFMySQL - Unknown owner - C:\Program Files\Quest Software\Benchmark Factory for Databases\Repository\MySQL\bin\mysqld-max-nt.exe O23 - Service: Com4QLBEx - Hewlett-Packard Development Company, L.P. - C:\Program Files\Hewlett-Packard\HP Quick Launch Buttons\Com4QLBEx.exe O23 - Service: hpqwmiex - Hewlett-Packard Development Company, L.P. - C:\Program Files\Hewlett-Packard\Shared\hpqwmiex.exe O23 - Service: OfficeScanNT RealTime Scan (ntrtscan) - Trend Micro Inc. - C:\Program Files\Trend Micro\OfficeScan Client\ntrtscan.exe O23 - Service: SMS Task Sequence Agent (smstsmgr) - Unknown owner - C:\Windows\system32\CCM\TSManager.exe O23 - Service: Check Point VPN-1 Securemote service (SR_Service) - Check Point Software Technologies - C:\Program Files\CheckPoint\SecuRemote\bin\SR_Service.exe O23 - Service: Check Point VPN-1 Securemote watchdog (SR_Watchdog) - Check Point Software Technologies - C:\Program Files\CheckPoint\SecuRemote\bin\SR_Watchdog.exe O23 - Service: Trend Micro Unauthorized Change Prevention Service (TMBMServer) - Trend Micro Inc. - C:\Program Files\Trend Micro\OfficeScan Client\..\BM\TMBMSRV.exe O23 - Service: OfficeScan NT Listener (tmlisten) - Trend Micro Inc. - C:\Program Files\Trend Micro\OfficeScan Client\tmlisten.exe O23 - Service: OfficeScan NT Proxy Service (TmProxy) - Trend Micro Inc. - C:\Program Files\Trend Micro\OfficeScan Client\TmProxy.exe O23 - Service: VNC Server Version 4 (WinVNC4) - RealVNC Ltd. - C:\Program Files\RealVNC\VNC4\WinVNC4.exe -- End of file - 8204 bytes As suggested in this very similar question, I have run full scans (+boot time scans) with RegRun and UnHackMe, but they also did not find anything. I have carefully examined all entries in the Event Viewer, but there's nothing wrong. Now I know that there is a hidden trojan (rootkit) on my machine which seems to disguise itself quite successfully. Note that I don't have the chance to remove the HDD, or reinstall the OS as this is a work machine subjected to certain IT policies on a company domain. Despite all my attempts, the problem still remains. I strictly need a to-the-point method or a pukka rootkit remover to remove whatever it is. I don't want to monkey with the system settings, i.e. disabling auto runs one by one, messing the registry, etc. EDIT 2: I have found an article which is closely related to my trouble: Malware can turn off UAC in Windows 7; “By design” says Microsoft. Special thanks(!) to Microsoft. In the article, a VBScript code is given to disable UAC automatically: '// 1337H4x Written by _____________ '// (12 year old) Set WshShell = WScript.CreateObject("WScript.Shell") '// Toggle Start menu WshShell.SendKeys("^{ESC}") WScript.Sleep(500) '// Search for UAC applet WshShell.SendKeys("change uac") WScript.Sleep(2000) '// Open the applet (assuming second result) WshShell.SendKeys("{DOWN}") WshShell.SendKeys("{DOWN}") WshShell.SendKeys("{ENTER}") WScript.Sleep(2000) '// Set UAC level to lowest (assuming out-of-box Default setting) WshShell.SendKeys("{TAB}") WshShell.SendKeys("{DOWN}") WshShell.SendKeys("{DOWN}") WshShell.SendKeys("{DOWN}") '// Save our changes WshShell.SendKeys("{TAB}") WshShell.SendKeys("{ENTER}") '// TODO: Add code to handle installation of rebound '// process to continue exploitation, i.e. place something '// evil in Startup folder '// Reboot the system '// WshShell.Run "shutdown /r /f" Unfortunately, that doesn't tell me how I can get rid of this malicious code running on my system. EDIT 3: Last night, I left the laptop open because of a running SQL task. When I came in the morning, I saw that UAC was turned off. So, I suspect that the problem is not related to startup. It is happening once a day for sure no matter if the machine is rebooted.

    Read the article

  • Disable XP disk check using FAT32

    - by mike xie
    Right now I'm using Windows XP and Macintosh on my MacBook Pro via Bootcamp. Sometimes my XP would crash and when I restarted it it would have to go through disk check, although it says I can skip it by pushing a key, but this never worked for me. I did a bit of research online on how to disable disk check and found chkntfs /x c: but when I tried this out in my cmd it said the disk is FAT32 format. I tried to convert my C: drive from FAT32 to NTFS by using convert c: /FS:NTFS but when I tried this it told me to locate my C: drive. I tried to type C: and Bootcamp but couldn't really get past it. I later saw someone said to use this: Windows Registry Editor Version 5.00 [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager] "AutoChkTimeOut"=dword:0000000 [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager] "BootExecute"=hex(7):61,00,75,00,74,00,6f,00,63,00,68,00,65,00,63,00,6b,00,20,\ 00,61,00,75,00,74,00,6f,00,63,00,68,00,6b,00,20,00,2a,00,00,00,00,00 [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon] "SFCScan"=dword:00000000 [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\MyComputer\cleanuppath] @=hex(2):25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,00,74,00,25,\ 00,5c,00,73,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,63,00,6c,00,\ 65,00,61,00,6e,00,6d,00,67,00,72,00,2e,00,65,00,78,00,65,00,20,00,2f,00,44,\ 00,20,00,25,00,63,00,00,00 (Save it as .reg and execute it) I have just tried running it but am not really sure if it did anything (my laptop hasn't crashed yet :) ) Firstly, I am wondering if someone can tell me how to check if that script worked? Secondly, if that script didn't work, does anyone have any solution for these problems? Is there another way to disable disk check or is there another way for me to change my FAT32 to NTFS?

    Read the article

  • Getting Windows (VMware) to load from OSX's localhost without an Internet Connection

    - by Jonah Goldstein
    I'm using MAMP to host my local sites, and VirtualHostX so that I can access sites during local development via a convenient URL like mysite.dev I'm also running Windows XP via VirtualBox, and it would be great to be able to load up any of my local sites within windows while offline as currently often working without access, on the move, unfortunately. I know that I can append my IP and a nice domain name to the host file in C:/WINDOWS/system32/drivers/etc ... and i can find my IP simply through terminal with "ifconfig" while I'm online. The problem is that when I'm not online, there's no IP. Even if there is an IP (when i have a connection), I still have grab it and update the windows hosts' file all the time, since I'm developing from a laptop and have a new IP at the drop of a dime. I found a tutorial where the author is able to get a permanent IP. He uses VMware Fusion as his VMachine, which is the only difference between his setup and mine. By running the terminal command "ifconfig vmnet1" he gets: a secret IP the virtual machine uses to talk to OSX And that doesn't change - which is awesome. I'm assuming it exists even if he's offline. His tutorial is here, http://bit.ly/U2lq It would be pretty fantabulous if I could replicate this with virtualBox. Anyone have ideas? Thanks:)

    Read the article

  • Trying to understand Wireless N vs Wireless AC

    - by EGHDK
    Whenever a new wireless standard gets approved you expect faster speeds and longer range. From everything that I've read about it, it seems that AC will only transfer over the 5GHz band and up to 3Gbps. Studying the new AC routers on the market, it seems that they will transfer over 5GHz and 2.4GHz. And 5GHz will only transfer at 1.3Gbps. Which isn't what AC is supposed to be. I know there is a difference between what the standard actually says, and what products will actually do, but is there any reason for this? Is there any other main differences between AC and N? I've heard people discussing AC and saying that it's finally "fixing" what N was supposed to fix... what do they mean by that? Any security benefits? I have seen this image online: Will AC really do that? Will that require an AC network card in my laptop for that to actually happen? Lastly, will the router only be able to communicate with AC devices if I have beamforming technology on? I know it's a ton of questions, but most articles online seem to be outdated, and don't provide too much reliability.

    Read the article

  • How to use the AWUS036H on MacBook Pro with Lion and Backtrack in VM?

    - by Swader
    I have the AWUS036H USB WiFi adapter and have recently upgraded the OSX to Lion. The thing is, there are no drivers for Lion for the AWUS036H, and I would have to boot into 32bit mode every time I want to launch the adapter as per instructions here: http://www.youtube.com/watch?v=n9_HAGi1ce0 I also want to install BackTrack as I deal in networks a lot for my company. While this would be a simple matter on any other laptop, the company issued Macbook does not allow booting into any OS other than MacOSX or Windows with Bootcamp. Now, since dual booting into BT is not an option, I would like Backtrack to run in VM inside my MacOSX Lion - and this it does. It works like a charm inside VirtualBox. But since there are no 64bit drivers for the wifi adapter, Lion doesn't recognize it and cannot install it. This, in turn, means that Backtrack cannot see it even though AWUS036H usually works flawlessly with BT. How can I make my VM-based BT see the wifi adapter even if the parent OS doesn't see it, if at all? Is there a way, or am I better off buying a new WiFi adapter that supports OSX 10.7 such as the AWUS036NHR?

    Read the article

  • Cannot ping Google Public DNS on 8.8.8.8

    - by Tibor
    I have a weird problem on my Windows 7 (x64) computer. I seem to cannot ping the Google Public DNS on one of its addresses (while the other works fine). The peculiar thing is that it fails with the General failure. error message which usually means that there is a problem with a network adapter/base connectivity and not a timeout as one would expect. I checked my routing tables for any anomalies and I even flushed them but the problem seems unrelated. All the other hosts I tried ping fine (either respond or timeout). If I try to tracert or connect to the address via browser (yes, I know that it doesn't listen on port 80), it also fails instantaneously. The reason I need to ping 8.8.8.8 is that I commonly use it as a test of Internet conectivity due to it being rememberable. The problem occurs no matter where I connect to the Internet (it is a laptop computer). What could be the cause of this anomaly? Note: I use native IPv6 connectivity.

    Read the article

  • Xp SP3 - Non-Functioning

    - by Josh
    Ok Here is a crazy problem, I have a HP dv6000 Laptop that can no longer hold a charge, so I hooked it up to my TV, bought a wireless mouse and keyboard and configured xp to run with the lid closed, It has medium to heavy usage mainly just streaming from sites like Netfilx, Hulu, ABC, etc. And playing movies I ripped of dvd. It ran fine for a while but recently it has been having some weird problems: Problem one: I used to use firefox but now when run it I can type but as soon as I click something it just shuts down, completely, I can't even close it unless I use taskmanager to do it. So I went and got google chrome which is better but still hit or miss, but never completely shuts down, I just can't click anything or type anything, or sometimes I just can't type anything or vice versa. Also when I open a new tab, and try to move back to my old one, it automatically closes the old tab when I click on it. Problem two: When using the internet I can't use any other application or anything windows (ie. Windows explorer) until I force quit all browsers with taskmanger. The reason I can't run anything is because I can't click on it. Problem three: When I try to play a movie (with vlc) Once it starts playing I can't click on anything, but I can use hotkeys, and once it stops everything is fine again. Well I hope somebody knows whats going on because I have no clue, If you need clarification or more info on something I would be happy to provide it...

    Read the article

  • Outlook 2007 will not send/receive using RPC over HTTP to an exchange server.. works for other users

    - by bob franklin smith harriet
    I have an incredibly frustrating user issue that I have been unable to resolve for over a week, any ideas for this would be greatly appreciated. The user is having troubles using Outlook 2007 to send or receive emails over using RPC over HTTP (Outlook Anywhere) to an exchange server. Basically what happens, the connection will be establised and the user will be prompted for the username and password, those are submitted and then outlook tries to download emails which fails and the connection to the exchange server will remain unavailable. The machine can ping and everything to the exchange server there is no connection issue there. The setup worked fine for him up untill now and also works for possibly hundreds of other users using the exact same settings, also the same settings will work from the users iphone on the same internet connection, and from my own system using outlook. The exchange server has the webmail https feature and that can be logged into and send and receive emails fine. Steps taken so far: removing the .ost file for the account and allowing office to rebuild it (fixes the issue for a short period of time, then the same symptons occur) deleted exchange profile and recreated (no change in issue) uninstalled all antivirus and firewalls (no change in issue) removed all cached passwords (keymgr.dll) (no change in issue) removed all entries from the hosts file (no change in issue) uninstalled and reinstalled office 2007 (Temporary fix of issue) Installing Symantec Endpoint Client caused a lot of email scan popups to be displayed, after a reboot this stopped and a scan it picked a few trojans that it removed. This fixed the issue temporarily as well, the issue is back again now. I am completely out of ideas now, there seems to be nothing that can be done to fix this issue outside of rebuilding the PC which is a massive pandoras box I don't want to enter with this user. --- Update ---- Malware scans from multiple products have been run on the machine and all updates were installed. The real problem with this user is his distance from us, there is no way to supply a spare laptop or rebuild the machine currently.

    Read the article

  • Microsoft Arc Mouse OS X

    - by meepz
    I recently bought a new Mac Book Pro with Mountain Lion 10.8 on it. The only portable mouse I have is my Microsoft Arc Mouse. I wanted to use it with the laptop so I installed the IntelliPoint 8.2 for Mac from Microsofts website. According to their website, this driver is for OS X 10.4-10.7. Now I thought that wouldnt be too much of an issue but unfortunately for me, the driver installs fine and the mouse is detected but I get no movement and when I click the buttons nothing happens. I took the mouse with me on a business trip to EU and before I left I checked if the mouse worked with my desktop which is running Windows 7 and it worked without any hiccups. I'm not too sure where the OS differs from 10.7 to 10.8. I found an article online but it doesn't pertain to my mouse, although it could be of assistance. I have tried my version of their adjustment but I am not too knowledgable on low level hardware/software modifications so I may have done it wrong. heres the link: http://refluxions.wordpress.com/2008/08/18/mac-os-x-mouse-madnessfixed/ I get the following details when I check mouse info in the IntelliPoint preferences pane: The following Microsoft mouse devices are currently connected to your Macintosh driven by the Intellipoint software. Arc Mouse Vendor name: Microsoft Product name: Microsoft AE 2.4GHz Transceiver 5.0 Vendor ID: 045E Product ID: 074F Device version: 0140 if anyone has any suggestions on how to fix this it would be greatly appreciated! I love the mouse and im here in EU for another two weeks. Thanks

    Read the article

  • Swapping Function (Fn) and Control (Ctrl) Keys on Lenovo ThinkPad W500

    - by Howiecamp
    I'd like to swap the Fn and Ctrl keys on my ThinkPad W500 (like many others!). I wanted to comment on http://superuser.com/questions/35228/how-can-i-switch-the-function-and-control-keys-on-my-laptop and StackOverflow question 514781 (please Google it because I don't have enough rep to include 2 hyperlinks) but I don't have enough rep to do so to comment. Numerous folks (in both the above questions and on other Google searches) indicate that Windows doesn't register the Fn key as a keypress but using a tool that gives the ASCII value of a keypress (visit www mihov com / eng / am.html) I see the Fn key returning FF (perhaps FF in this case means 'not registered'). I also see that keys like Ctrl register with one ASCII code when pressed alone and another when pressed in combo with another key. Fn will only register when pressed alone, so Windows definitely isn't seeing the combo. This took a solution like AutoHotKey off the table. I ran KeyTweak (which shows you the hardware scan codes of a keypress and the Fn key registerd as 57443). Using this program I remapped Fn to the Ctrl key; this worked perfectly. However, I suspect that because of the issue in #1, the combo of, for example, Fn + C did not execute a copy. Short of retraining my pinky I'm actually considering removing the keyboard and resoldering the connections to swap those keys. I'd love to get some input as to the root technical issue(s) and possible solutions here. Thanks

    Read the article

  • Use Mac OS X Server As Development Environment

    - by macinjosh
    I've installed Mac OS X Server 10.6.3 on my laptop to use as my normal OS. I do a lot of web development and thought it would be handy to run OS X Server so I could more easily manage my local development environment (Apache Virtual Hosts, Hostnames for each local site, etc). I'm really enjoying the new setup except for one problem. DNS. My ideal situation would be to add a site (some-site.local) in the Web Service and then go to the DNS Service and add a primary record for the new site. I actually got this working at one point but after a reboot it stopped working! The records look the same as they did before the reboot but the site doesn't come up in Safari. Here is a list of my needs: Need to be able to add new domains at a whim Domains always map to a site on the same box's Web Service Local & External IPs often change It would nice if it worked on any network (i.e. WiFi at the airport or coffee shop) Sites only need to be accessible locally Configuration should stay put even after rebooting I've done some googling and used this as a bit of guide. In the past I've used MAMP and then just a local Apache/PHP/MySQL install with a manually managed hosts file. I'd rather not go back.

    Read the article

  • Suggestions for Windows 8 migration [closed]

    - by Big Endian
    I'm thinking of migrating to Windows 8. At first I hated it, but I'm pretty sure the Windows 8 model is the future, and I don't particularly want to end up hating the future like my parents, frustrated and bewildered by anything past Windows XP. I'm currently running Windows 7 and my system has been accumulating some problems. It's probably an accumulation of issues from installing too much software, changing firewall settings, installing Ubuntu alongside Windows, and... well I'm not sure, but my computer has been buggy in unexpected ways lately (freezing and unfreezing, display driver crashing and recovering, and what I call "deep freeze/thaw cycle" where the mouse won't even move for a while). I'm good at solving computer problems, but I can't seem to get to the root of these and my best idea for fixing them is making sure I've backed up every file then re-installing the entire OS. Luckily for me, a new OS is just around the corner so this would be a good time to get two things out of the way at once. The problem I see is that the upgrade options I see are all "seamless". I don't want a seamless upgrade. I want to wipe the slate clean and start all over. Does this mean I will have to buy a full, new copy of Windows 8 rather than one of the cheaper upgrading options? Or does it not make since for me to go to Windows 8 given that I have a laptop, not a tablet? Maybe I should just re-install Windows 7, or even call good enough good enough, try to eliminate the bugs, and start with a fresh slate in 2-3 years after this computer eventually dies entirely from (inevitable) hardware failure. What would be the advantages or disadvantages and costs of each option, how would I go about upgrading to Windows 8 if that's the option I choose, and what is your personal opinion about my situation?

    Read the article

  • Squid SSL transparent proxy - SSL_connect:error in SSLv2/v3 read server hello A

    - by larryzhao
    I am trying to setup a SSL proxy for one of my internal servers to visit https://www.googleapis.com using Squid, to make my Rails application on that server to reach googleapis.com via the proxy. I am new to this, so my approach is to setup a SSL transparent proxy with Squid. I build Squid 3.3 on Ubuntu 12.04, generated a pair of ssl key and crt, and configure squid like this: http_port 443 transparent cert=/home/larry/ssl/server.csr key=/home/larry/ssl/server.key And leaves almost all other configurations default. The authorization of the dir that holds key/crt is drwxrwxr-x 2 proxy proxy 4096 Oct 17 15:45 ssl Back on my dev laptop, I put <proxy-server-ip> www.googleapis.com in my /etc/hosts to make the call goes to my proxy server. But when I try it in my rails application, I got: SSL_connect returned=1 errno=0 state=SSLv2/v3 read server hello A: unknown protocol And I also tried with openssl in cli: openssl s_client -state -nbio -connect www.googleapis.com:443 2>&1 | grep "^SSL" SSL_connect:before/connect initialization SSL_connect:SSLv2/v3 write client hello A SSL_connect:error in SSLv2/v3 read server hello A SSL_connect:error in SSLv2/v3 read server hello A Where did I do wrong?

    Read the article

  • Not playing .mov files in WMP, not loading .mov files in Windows Live Movie Maker. What am I missing?

    - by royatl
    My friend needs to create a video and she has some source files that are .MOV format. I assume they are h.264. She can view the files with QuickTime. She has a laptop running Vista, and a just-downloaded version of Windows Live Movie Maker (which I'll call LMM for short). LMM shows an 'X' icon when she tries to add one of these files to it. My machine runs Windows 7 Pro, and a slightly earlier build of LMM and has no problems editing video with these source files. I assume she's missing a codec but what can I tell her? I've looked at the answer that mentions a QuickTime DirectShow Source Filter Plugin. It mentions only playback through WMP, not editing via LMM, but is that what she needs? I didn't have to load anything like that. That project's now done (she punted and used iMovie on a Mac). But I did gain another clue. She could play a 720p .MOV file, but these were 1920x1080 files.

    Read the article

  • How to move a sata drive to a machine without AHCI mode

    - by Andrew Cooper
    I've got a Dell Inspiron 1545 on which the screen has died. I'm able to plug an external monitor into the Inspiron 1545 and it works fine, so the screen is the only issue. The OS is Win7. I'm trying to move the disk to a spare Dell Precision M90 laptop that I've got lying around. The problem is that almost as soon as the Windows logo appears in the boot sequence I get a BSOD with a STOP 0x0000007B message. Researching this message pointed to issues with SATA AHCI mode. I looked in the BIOS of the Inspiron 1545 and the controller was set to AHCI mode. I set it to ATA mode and tried to boot with the same drive and got the same result as on the Precision M90. Switching back to AHCI allowed the machine to boot correctly again. I checked the BIOS on the Precision M90 and it doesn't seem to support AHCI mode, although it is a SATA controller onboard. The BIOS is the latest A08 version available from Dell. Is there any way I can get this drive to boot in the M90 without reformatting it?

    Read the article

  • Where to get grub files without using grub-install

    - by Jacky
    I am in a particular situation. I have a MacBook Pro with no internal CD drive and both MacOS X (minimal setup) and Linux (my main system) is installed. During a cross-upgrade to Ubuntu 12.04 I messed up grub, so that my /boot/grub directory is basically empty. This means I can't boot Linux on the laptop anymore but only get into grub rescue. Normally this is no issue as you'd just boot from a rescue CD or USB stick, but unfortunately with a MacBook Pro this is not possible (I have reFIT installed and it attempts to boot, but it fails and the manual says that Apple's EFI firmware is not able to handle this situation). From MacOS X, however, I still have write access to the Linux partition. I've now been trying to figure out how to populate the /boot/grub folder with the necessary files, to no avail so far. The ISO image of Ubuntu 12.04 contains an EFI folder which is not what I am looking for, instead I need the normal.mod files for the grub version of Ubuntu 12.04. I do not have any other machine to set up a virtual machine of Ubuntu 12.04 to extract this from after a grub-install, so I am asking for ideas here how to solve this mess. P.S.: I installed the Linux previously when I still had a working internal CD drive. This is gone now.

    Read the article

  • How can I connect integrated webcam with virtualbox

    - by Mike Stumpf
    I am trying to use a Windows XP VM for VirtualBox on my Windows 8.1 laptop. I have tried the usual attaching USB device but I get an error saying "USB device is busy with previous request". My webcam is not active in any applications and this happens after a clean reboot of the host, the guest, and VirtualBox. Here are the details: Host -HP Pavilion 17 Notebook PC (stock) -Windows 8.1 -AMD A10-5750M APU -HP Truevision HD (integrated webcam) VM I got the VM here: http://www.modern.ie/en-us/virtualization-tools VirtualBox -VirtualBox 4.3.12 installed -VirtualBox Extension pack installed -Guest additions are installed for 4.3.12 -Enable USB Controller is checked -It does not matter if enable 2.0 controller is checked or not -It does not matter if a USB device filter is set up for the webcam or not -Here is the error message: Failed to attach the USB device DDFEQ01G45BFBV HP Truevision HD [0004] to the virtual machine IE8 - WinXP. USB device 'DDFEQ01G45BFBV HP Truevision HD' with UUID {7a2e2a45-974d-482b-9b4e-9f9abbcd0ebb} is busy with a previous request. Please try again later. Result Code: E_INVALIDARG (0x80070057) Component: HostUSBDevice Interface: IHostUSBDevice {173b4b44-d268-4334-a00d-b6521c9a740a} Callee: IConsole {8ab7c520-2442-4b66-8d74-4ff1e195d2b6} I read on some VirtualBox forums that disabling USB 2.0 support in the host BIOS solved their issue but I wanted to know if there were any other ideas before I muck around in there. Thanks

    Read the article

  • Convert Mac font to Windows format?

    - by Moshe
    I have a font that was used on Mac OS X 10.5. Mac recognizes it as a font file. Windows Vista shows it as a "File". Changing the file extension doesn't work. I tried both .otf and .ttf and neither worked. (Surprise! I didn't thinks so, but I'd be a fool for asking if that was the answer, so I tried...) Perhaps I need to try a different extension? Are there any utilities to convert the font? A Windows equivalent? It's called Franco. (FrancoNormal, actually.) Thanks. EDIT: DFontSplitter didn't work. I saw something online about "data fork" and "resource fork" that has to match up. Can someone please explain that? Do I need both for a font conversion? What do I tell my graphic designer to send me? EDIT 2: The font doesn't work when downloaded to Mac OS X either. (A different machine from the original.) "Get Info" reveals that there is no file extension, leading me to believe that this is the newer font format. Where wold I find the the "data fork" and "resource fork" on the Mac? I want to be able to tell the designer exactly where to look. EDIT 3: DFontSplitter works on the original computer but not on my PC. I converted and emailed myself the fonts from the graphic designers laptop. I guess it has to do with the data being stored in a "fork" whatnot. Thanks, Matt for that article. Thank you again for your help!

    Read the article

  • Starting airplay from command line, to send output of 'Say' Mac OS X command to airplay

    - by Fabien
    Ok, Sunday question :) Trying to make a little joke... 1) if you open a terminal, and type "say -a ?", Mac OS X will give you the list of devices it can send spoken words to. On mine, it says: 39 AirPlay 47 Built-in Output 2) I have a Denon airplay-ready received in my living room and I'm trying to send spoken words to my wife downstairs... I can send music without any problem using iTunes so, from an infrastructure standpoint, I'm all set. 3) I want my computer to say (out of the blue) "Honey, why don't you bring me a cup of coffee". I can make it say that locally on my internal laptop speakers, but I can't seem to send that to device 39 successfully. I am suspecting that there are a few other things that need to be setup before it works, i.e. setting up airplay output to "denon", maybe opening a channel and reserving it. I don't know. Has anyone played with this? Is there a way to setup airplay from the command line? That would be awesome :)

    Read the article

  • OpenVPN, install a TAP adapter

    - by GolezTrol
    When I try to connect to my work VPN using OpenVPN, the connection fails with the message: All TAP-Win32 adapters on this system are currently in use. Many sources suggest to look in Control Panel\Network and Internet\Network Connections an enable the TAP adapter, but when I look there, there is none. Now I've run addtap.bat which is provided with OpenVPN, but I still don't get to see any TAP adapter, and logging in in VPN still fails. The output of addtap.bat is C:\Windows\system32>"C:\Program Files (x86)\OpenVPN\bin\tapinstall.exe" install "C:\Program Files (x86)\OpenVPN\driver\OemWin2k.inf" tap0801 Device node created. Install is complete when drivers are updated... Updating drivers for tap0801 from C:\Program Files (x86)\OpenVPN\driver\OemWin2k .inf. Drivers updated successfully. I've Run As Administrator both the setup of OpenVPN and addtap.bat. I've run deltapall.bat to remove any (maybe hidden) adapters. It said it removed three of them, after which I ran addtap.bat again to try to create another one. I also run OpenVPN itself as administrator. What's wrong? Running Windows 7 Home Premium on a HP Pavilion dv7 4050ed. It has worked before, but I recently had to reinstall my laptop, for which I used the restore disks I created when I just got it. Everything else seems to work fine. == UPDATE == The TAP adapter is found in Device Manager, but apparently it is disabled because it is incompatible with Windows 7 64bit. I've deïnstalled OpenVPNGui, downloaded a version that should be 64bit compatible, and installed that. Still no cigar. Then I found a tip to install OpenVPN (version 9) after installing OpenVPNGui, because that installs OpenVPN version 8. Now I got a v9 TAP driver in Device Manager, but it still doesn't work and shows up in device manager with an exclamation mark, and not at all in my network devices.

    Read the article

< Previous Page | 296 297 298 299 300 301 302 303 304 305 306 307  | Next Page >