Search Results

Search found 47448 results on 1898 pages for 'system printing'.

Page 300/1898 | < Previous Page | 296 297 298 299 300 301 302 303 304 305 306 307  | Next Page >

• Can't re-mount existing RAID10 on Ubuntu

  - by Zoran

  I saw similar questions, but didn't find what solution to my problem. After power-cut, one of RAID10 (4 disks were) appears to be malfunctioning. I make tha array active one, but can not mount it. Always the same error: mount: you must specify the filesystem type So, here is what I have when type mdadm --detail /dev/md0 /dev/md0: Version : 00.90.03 Creation Time : Tue Sep 1 11:00:40 2009 Raid Level : raid10 Array Size : 1465148928 (1397.27 GiB 1500.31 GB) Used Dev Size : 732574464 (698.64 GiB 750.16 GB) Raid Devices : 4 Total Devices : 3 Preferred Minor : 0 Persistence : Superblock is persistent Update Time : Mon Jun 11 09:54:27 2012 State : clean, degraded Active Devices : 3 Working Devices : 3 Failed Devices : 0 Spare Devices : 0 Layout : near=2, far=1 Chunk Size : 64K UUID : 1a02e789:c34377a1:2e29483d:f114274d Events : 0.166 Number Major Minor RaidDevice State 0 8 16 0 active sync /dev/sdb 1 0 0 1 removed 2 8 48 2 active sync /dev/sdd 3 8 64 3 active sync /dev/sde At the /etc/mdadm/mdadm.conf I have by default, scan all partitions (/proc/partitions) for MD superblocks. alternatively, specify devices to scan, using wildcards if desired. DEVICE partitions auto-create devices with Debian standard permissions CREATE owner=root group=disk mode=0660 auto=yes automatically tag new arrays as belonging to the local system HOMEHOST <system> instruct the monitoring daemon where to send mail alerts MAILADDR root definitions of existing MD arrays ARRAY /dev/md0 level=raid10 num-devices=4 UUID=1a02e789:c34377a1:2e29483d:f114274d ARRAY /dev/md1 level=raid1 num-devices=2 UUID=9b592be7:c6a2052f:2e29483d:f114274d This file was auto-generated... So, my question is, how can I mount md0 array (md1 has been mounted without problem) in order to preserve existing data? One more thing, fdisk -l command gives the following result: Disk /dev/sdb: 750.1 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x660a6799 Device Boot Start End Blocks Id System /dev/sdb1 * 1 88217 708603021 83 Linux /dev/sdb2 88218 91201 23968980 5 Extended /dev/sdb5 88218 91201 23968948+ 82 Linux swap / Solaris Disk /dev/sdc: 750.1 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x0008f8ae Device Boot Start End Blocks Id System /dev/sdc1 1 88217 708603021 83 Linux /dev/sdc2 88218 91201 23968980 5 Extended /dev/sdc5 88218 91201 23968948+ 82 Linux swap / Solaris Disk /dev/sdd: 750.1 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x4be1abdb Device Boot Start End Blocks Id System Disk /dev/sde: 750.1 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xa4d5632e Device Boot Start End Blocks Id System Disk /dev/sdf: 750.1 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xdacb141c Device Boot Start End Blocks Id System Disk /dev/sdg: 750.1 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xdacb141c Device Boot Start End Blocks Id System Disk /dev/md1: 750.1 GB, 750156251136 bytes 2 heads, 4 sectors/track, 183143616 cylinders Units = cylinders of 8 * 512 = 4096 bytes Disk identifier: 0xdacb141c Device Boot Start End Blocks Id System Warning: ignoring extra data in partition table 5 Warning: ignoring extra data in partition table 5 Warning: ignoring extra data in partition table 5 Warning: invalid flag 0x7b6e of partition table 5 will be corrected by w(rite) Disk /dev/md0: 1500.3 GB, 1500312502272 bytes 255 heads, 63 sectors/track, 182402 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x660a6799 Device Boot Start End Blocks Id System /dev/md0p1 * 1 88217 708603021 83 Linux /dev/md0p2 88218 91201 23968980 5 Extended /dev/md0p5 ? 121767 155317 269488144 20 Unknown And one more thing. When using mdadm --examine command, here ise result: mdadm -v --examine --scan /dev/sdb /dev/sdc /dev/sdd /dev/sde /dev/sdf /dev/sd ARRAY /dev/md1 level=raid1 num-devices=2 UUID=9b592be7:c6a2052f:2e29483d:f114274d devices=/dev/sdf ARRAY /dev/md0 level=raid10 num-devices=4 UUID=1a02e789:c34377a1:2e29483d:f114274d devices=/dev/sdb,/dev/sdc,/dev/sdd,/dev/sde md0 has 3 devices which are active. Can someone instruct me how to solve this issue? If it is possible, I would like not to removing faulty HDD. Please advise

  Read the article

• deadlock when using WCF Duplex Polling with Silverlight

  - by Kobi Hari

  Hi all. I have followed Tomek Janczuk's demonstration on silverlight tv to create a chat program that uses WCF Duplex Polling web service. The client subscribes to the server, and then the server initiates notifications to all connected clients to publish events. The Idea is simple, on the client, there is a button that allows the client to connect. A text box where the client can write a message and publish it, and a bigger text box that presents all the notifications received from the server. I connected 3 clients (in different browsers - IE, Firefox and Chrome) and it all works nicely. They send messages and receive them smoothly. The problem starts when I close one of the browsers. As soon as one client is out, the other clients get stuck. They stop getting notifications. I am guessing that the loop in the server that goes through all the clients and sends them the notifications is stuck on the client that is now missing. I tried catching the exception and removing it from the clients list (see code) but it still does not help. any ideas? The server code is as follows: using System; using System.Linq; using System.Runtime.Serialization; using System.ServiceModel; using System.ServiceModel.Activation; using System.Collections.Generic; using System.Runtime.Remoting.Channels; namespace ChatDemo.Web { [ServiceContract] public interface IChatNotification { // this will be used as a callback method, therefore it must be one way [OperationContract(IsOneWay=true)] void Notify(string message); [OperationContract(IsOneWay = true)] void Subscribed(); } // define this as a callback contract - to allow push [ServiceContract(Namespace="", CallbackContract=typeof(IChatNotification))] [AspNetCompatibilityRequirements(RequirementsMode = AspNetCompatibilityRequirementsMode.Allowed)] [ServiceBehavior(InstanceContextMode=InstanceContextMode.Single)] public class ChatService { SynchronizedCollection<IChatNotification> clients = new SynchronizedCollection<IChatNotification>(); [OperationContract(IsOneWay=true)] public void Subscribe() { IChatNotification cli = OperationContext.Current.GetCallbackChannel<IChatNotification>(); this.clients.Add(cli); // inform the client it is now subscribed cli.Subscribed(); Publish("New Client Connected: " + cli.GetHashCode()); } [OperationContract(IsOneWay = true)] public void Publish(string message) { SynchronizedCollection<IChatNotification> toRemove = new SynchronizedCollection<IChatNotification>(); foreach (IChatNotification channel in this.clients) { try { channel.Notify(message); } catch { toRemove.Add(channel); } } // now remove all the dead channels foreach (IChatNotification chnl in toRemove) { this.clients.Remove(chnl); } } } } The client code is as follows: void client_NotifyReceived(object sender, ChatServiceProxy.NotifyReceivedEventArgs e) { this.Messages.Text += string.Format("{0}\n\n", e.Error != null ? e.Error.ToString() : e.message); } private void MyMessage_KeyDown(object sender, KeyEventArgs e) { if (e.Key == Key.Enter) { this.client.PublishAsync(this.MyMessage.Text); this.MyMessage.Text = ""; } } private void Button_Click(object sender, RoutedEventArgs e) { this.client = new ChatServiceProxy.ChatServiceClient(new PollingDuplexHttpBinding { DuplexMode = PollingDuplexMode.MultipleMessagesPerPoll }, new EndpointAddress("../ChatService.svc")); // listen for server events this.client.NotifyReceived += new EventHandler<ChatServiceProxy.NotifyReceivedEventArgs>(client_NotifyReceived); this.client.SubscribedReceived += new EventHandler<System.ComponentModel.AsyncCompletedEventArgs>(client_SubscribedReceived); // subscribe for the server events this.client.SubscribeAsync(); } void client_SubscribedReceived(object sender, System.ComponentModel.AsyncCompletedEventArgs e) { try { Messages.Text += "Connected!\n\n"; gsConnect.Color = Colors.Green; } catch { Messages.Text += "Failed to Connect!\n\n"; } } And the web config is as follows: <system.serviceModel> <extensions> <bindingExtensions> <add name="pollingDuplex" type="System.ServiceModel.Configuration.PollingDuplexHttpBindingCollectionElement, System.ServiceModel.PollingDuplex, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35"/> </bindingExtensions> </extensions> <behaviors> <serviceBehaviors> <behavior name=""> <serviceMetadata httpGetEnabled="true"/> <serviceDebug includeExceptionDetailInFaults="false"/> </behavior> </serviceBehaviors> </behaviors> <bindings> <pollingDuplex> <binding name="myPollingDuplex" duplexMode="MultipleMessagesPerPoll"/> </pollingDuplex> </bindings> <serviceHostingEnvironment aspNetCompatibilityEnabled="true" multipleSiteBindingsEnabled="true"/> <services> <service name="ChatDemo.Web.ChatService"> <endpoint address="" binding="pollingDuplex" bindingConfiguration="myPollingDuplex" contract="ChatDemo.Web.ChatService"/> <endpoint address="mex" binding="mexHttpBinding" contract="IMetadataExchange"/> </service> </services> </system.serviceModel>

  Read the article

• problems calling webservices through the https connection

  - by shivaji123

  i have done an application in BlackBerry which takes username & password with url link which is a link of server here i am calling some webservices but it is doing the connection in https so when i take the username password & url link & hit the login button it basically calls a webservice but then the application connecting to the webservice for ever & after some time i get the error massage something "unreported exception the application is not responding" .& then the application crashes out.Also i am using the SOAP client library . this is the piece of code synchronized (this) { try { _httpconn = (HttpConnection) Connector.open(url,Connector.READ_WRITE);//Connector.READ_WRITE //_httpconn =(StreamConnection)Connector.open(url); //System.out.println("-----------httpsconnection() PART--------------------"); _httpconn.setRequestMethod(HttpConnection.POST); //_httpconn.setRequestProperty("Content-Type", "application/x-www-form-urlencoded"); //System.out.println("-----------httpsconnection() PART- **-------------------"); _httpconn.setRequestProperty("SOAPAction", Constants.EXIST_STR); //System.out.println("-----------httpsconnection() PART-REQUEST -------------------"); _httpconn.setRequestProperty("Content-Type", "text/soap+xml"); //System.out.println("-----------httpsconnection() PART- CONTENT-------------------"); _httpconn.setRequestProperty("User-Agent", "kSOAP/1.0"); //System.out.println("-----------httpsconnection() PART-USER Agent-------------------"); String clen = Integer.toBinaryString(input.length()); _httpconn.setRequestProperty("Content-Length", clen); //System.out.println("-----------httpsconnection() Content-Length--------------------"); _out = _httpconn.openDataOutputStream(); //System.out.println(input+"-----------input--------------------"+url); _out.write(input.getBytes()); _out.flush(); // may or may not be needed. //int rc = _httpconn.getResponseCode(); int rc = _httpconn.getResponseCode(); if(rc == HttpConnection.HTTP_OK) { isComplete = true; _in = _httpconn.openInputStream(); msg = new StringBuffer(); byte[] data = new byte[1024]; int len = 0; int size = 0; while ( -1 != (len = _in.read(data)) ) { msg.append(new String(data, 0, len)); size += len; } responsData = msg.toString(); System.out.println("-----------responsData "+responsData); } if(responsData!=null) isSuccessful = true; stop(); } catch (InterruptedIOException interrIO) { //errStr = "Network Connection hasn't succedded. "+ //"Please check APN setting."; UiApplication.getUiApplication().invokeLater(new Runnable() { public void run() { Status.show("Network Connection hasn't succedded. "+ "Please try again later."); } }); isComplete = true; System.out.println(interrIO); stop(); } catch (IOException interrIO) { System.out.println("-----------IO EXCEPTION--------- "+interrIO); //errStr = "Network Connection hasn't succedded. "+ //"Please check APN setting." ; UiApplication.getUiApplication().invokeLater(new Runnable() { public void run() { Status.show("Network Connection hasn't succedded. "+ "Please try again later." ); } }); isComplete = true; System.out.println(interrIO); stop(); } catch (Exception e) { System.out.println(e); //errStr = "Unable to connect to the internet at this time. "+ //"Please try again later."; UiApplication.getUiApplication().invokeLater(new Runnable() { public void run() { Status.show("Unable to connect to the internet at this time. "+ "Please try again later." ); } }); isComplete = true; stop(); } finally { try { if(_httpconn != null) { _httpconn.close(); _httpconn = null; } if(_in != null) { _in.close(); _in = null; } if(_out != null) { _out.close(); _out = null; } } catch(Exception e) { System.out.println(e); UiApplication.getUiApplication().invokeLater(new Runnable() { public void run() { Status.show("Unable to connect to the internet at this time. "+ "Please try again later." ); } }); } } } } can anybody help me out. Thanks in advance

  Read the article

• Silverlight 5 Hosting :: Features in Silverlight 5 and Release Date

  - by mbridge

  Silverlight 5 is finally announced in the Silverlight FireStarter Event on the 2nd December, 2010. This new version of Silverlight which was earlier labeled as 'Future of Microsoft Silverlight' has now come much closer to go live as the first Silverlight 5 Beta version is expected to be shipped during the early months of 2011. However for the full fledged and the final release of Silverlight 5, we have to wait many more months as the same is likely to be made available within the Q3 2011. As would have been usually expected, this latest edition would feature many new capabilities thereby extending the developer productivity to a whole new dimension of premium media experience and feature-rich business applications. It comes along with many new feature updates as well as the inclusion of new technologies to improve the standard of the Silverlight applications which are now fine-tuned to produce next generation business and media solutions that is capable to meet the requirements of the advanced web-based app development. The Silverlight 5 is all set to replace the previous fourth version which now includes more than forty new features while also dropping various deprecated elements that was prevalent earlier. It has brought around some major performance enhancements and also included better support for various other tools and technologies. Following are some of the changes that are registered to be available under the Silverlight 5 Beta edition which is scheduled to be launched during the Q1 2011. Silverlight 5 : Premium Media Experiences The media features of Silverlight 5 has seen some major enhancements with a lot of optimizations being made to deliver richer solutions. It's capability has now been extended to make things easier, faster and capable of performing the desired tasks in the most efficient manner. The Silverlight media solutions has already been a part of many companies in the recent days where various on-demand Silverlight services were featured but with the arrival of the next generation premium media solution of Silverlight 5, it is expected to register new heights of success and global user acclamation for using it with many esteemed web-based projects and media solutions. - The most happening element in the new Silverlight 5 will be its support for utilizing the GPU based hardware acceleration which is intended to lower down the CPU load to a significant extent and thereby allowing faster rendering of media contents without consuming much resources. This feature is believed to be particularly helpful for low configured machines to run full HD media content without any lagging caused due to processor load. It will hence be one great feature to revolutionize the new generation high quality media contents to be available within the web in a more efficient manner with its hardware decoded video playback capabilities. - With the inclusion of hardware video decoding to minimize the processor load, the Silverlight 5 also comes with another optimization enhancement to also reduce the power consumption level by making new methods to deal with the power-saver settings. With this optimization in effect, the computer would be automatically allowed to switch to sleep mode while no video playback is in progress and also to prevent any screensavers to popup and cause annoyances during any video playback. There would also be other power saver options which will be made available to best suit the users requirements and purpose. - The Silverlight trickplay feature is another great way to tweak any silverlight powered media content as is used for many video tutorial sites or for dealing with any sort of presentations. This feature enables the user to modify the playback speed to either slowdown or speedup during the playback durations based on the requirements without compromising on the quality of output. Normally such manipulations always makes the content's audio to go off-pitch, but the same will not be the case with TrickPlay and the audio would seamlessly progress with the video without skipping any of its part. - In addition to all of the above, the new Silverlight 5 will be featuring wireless control of all the media contents by making use of remote controllers. With the use of such remote devices, it will be easier to handle the various media playback controls thereby providing more freedom while experiencing the premium media services. Silverlight 5 : Business Application Development The application development standard has been extended with more possibilities by bringing forth new and useful technologies and also reviving the existing methods to work better than what it was used to. From the UI improvements to advanced technical aspects, the Silverlight 5 scores high on all grounds to produce great next generation business delivered applications by putting in more creativity and resourceful touch to all the apps being produced with it. - The WPF feature of Silverlight is made more effective by introducing new standards of Databinding which is intended to improve the productivity standards of the Silverlight application developer. It brings in a lot of convenience in debugging the databinding components or expressions and hence making things work in a flawless manner. Some additional features related to databinding includes that of Ancestor RelativeSource, Implicit DataTemplates and Model View ViewModel (MVVM) support with DataContextChanged event and many other new features relating it. - It now comes with a refined text and printing service which facilitates better clarity of the text rendering and also many positive changes which are being applied to the layout pattern. New supports has been added to include OpenType font, multi-column text, linked-text containers and character leading support to name a few among the available features.This also includes some important printing aspects like that of Postscript Vector Printing API which allows to program our printing tasks in a user defined way and Pivot functionality for visualization concerns of informations. - The Graphics support is the key improvements being incorporated which now enables to utilize three dimensional graphics pattern using GPU acceleration. It can manage to provide some really cool visualizations being curved to provide media contents within the business apps with also the support for full HD contents at 1080p quality. - Silverlight 5 includes the support for 64-bit operating systems and relevant browsers and is also optimized to provide better performance. It can support the background thread for the networking which can reduce the latency of the network to a considerable extent. The Out-of-Browser functionality adds the support for utilizing various libraries and also the Win32 API. It also comes with testing support with VS 2010 which is mostly an automated procedure and has also enabled increased security aspects of all the Silverlight 5 developed applications by using the improved version of group policy support.

  Read the article

• How to Use An Antivirus Boot Disc or USB Drive to Ensure Your Computer is Clean

  - by Chris Hoffman

  If your computer is infected with malware, running an antivirus within Windows may not be enough to remove it. If your computer has a rootkit, the malware may be able to hide itself from your antivirus software. This is where bootable antivirus solutions come in. They can clean malware from outside the infected Windows system, so the malware won’t be running and interfering with the clean-up process. The Problem With Cleaning Up Malware From Within Windows Standard antivirus software runs within Windows. If your computer is infected with malware, the antivirus software will have to do battle with the malware. Antivirus software will try to stop the malware and remove it, while the malware will attempt to defend itself and shut down the antivirus. For really nasty malware, your antivirus software may not be able to fully remove it from within Windows. Rootkits, a type of malware that hides itself, can be even trickier. A rootkit could load at boot time before other Windows components and prevent Windows from seeing it, hide its processes from the task manager, and even trick antivirus applications into believing that the rootkit isn’t running. The problem here is that the malware and antivirus are both running on the computer at the same time. The antivirus is attempting to fight the malware on its home turf — the malware can put up a fight. Why You Should Use an Antivirus Boot Disc Antivirus boot discs deal with this by approaching the malware from outside Windows. You boot your computer from a CD or USB drive containing the antivirus and it loads a specialized operating system from the disc. Even if your Windows installation is completely infected with malware, the special operating system won’t have any malware running within it. This means the antivirus program can work on the Windows installation from outside it. The malware won’t be running while the antivirus tries to remove it, so the antivirus can methodically locate and remove the harmful software without it interfering. Any rootkits won’t be able to set up the tricks they use at Windows boot time to hide themselves from the rest o the operating system. The antivirus will be able to see the rootkits and remove them. These tools are often referred to as “rescue disks.” They’re meant to be used when you need to rescue a hopelessly infected system. Bootable Antivirus Options As with any type of antivirus software, you have quite a few options. Many antivirus companies offer bootable antivirus systems based on their antivirus software. These tools are generally free, even when they’re offered by companies that specialized in paid antivirus solutions. Here are a few good options: avast! Rescue Disk – We like avast! for offering a capable free antivirus with good detection rates in independent tests. avast! now offers the ability to create an antivirus boot disc or USB drive. Just navigate to the Tools -> Rescue Disk option in the avast! desktop application to create bootable media. BitDefender Rescue CD – BitDefender always seems to receive good scores in independent tests, and the BitDefender Rescue CD offers the same antivirus engine in the form of a bootable disc. Kaspersky Rescue Disk – Kaspersky also receives good scores in independent tests and offers its own antivirus boot disc. These are just a handful of options. If you prefer another antivirus for some reason — Comodo, Norton, Avira, ESET, or almost any other antivirus product — you’ll probably find that it offers its own system rescue disk. How to Use an Antivirus Boot Disc Using an antivirus boot disc or USB drive is actually pretty simple. You’ll just need to find the antivirus boot disc you want to use and burn it to disc or install it on a USB drive. You can do this part on any computer, so you can create antivirus boot media on a clean computer and then take it to an infected computer. Insert the boot media into the infected computer and then reboot. The computer should boot from the removable media and load the secure antivirus environment. (If it doesn’t, you may need to change the boot order in your BIOS or UEFI firmware.) You can then follow the instructions on your screen to scan your Windows system for malware and remove it. No malware will be running in the background while you do this. Antivirus boot discs are useful because they allow you to detect and clean malware infections from outside an infected operating system. If the operating system is severely infected, it may not be possible to remove — or even detect — all the malware from within it. Image Credit: aussiegall on Flickr     

  Read the article

• Alien deletes .deb when converting from .rpm

  - by Andre

  I'm trying to convert .rpm to .deb using alien. sudo alien -k libtetra-1.0.0-2.i386.rpm Alien says that: libtetra-1.0.0-2.i386.deb generated But when I check the folder - there is just original .rpm and no .deb. Also - I can see that for a split second there is a .deb file in a folder. so it looks like alien create .deb and deletes it right away. I suspect that it's maybe because I run 64 bit os and package is 32? Can somebody explain why alien deletes .deb automatically? Verbose output: LANG=C rpm -qp --queryformat %{NAME} libtetra-1.0.0-2.i386.rpm LANG=C rpm -qp --queryformat %{VERSION} libtetra-1.0.0-2.i386.rpm LANG=C rpm -qp --queryformat %{RELEASE} libtetra-1.0.0-2.i386.rpm LANG=C rpm -qp --queryformat %{ARCH} libtetra-1.0.0-2.i386.rpm LANG=C rpm -qp --queryformat %{CHANGELOGTEXT} libtetra-1.0.0-2.i386.rpm LANG=C rpm -qp --queryformat %{SUMMARY} libtetra-1.0.0-2.i386.rpm LANG=C rpm -qp --queryformat %{DESCRIPTION} libtetra-1.0.0-2.i386.rpm LANG=C rpm -qp --queryformat %{PREFIXES} libtetra-1.0.0-2.i386.rpm LANG=C rpm -qp --queryformat %{POSTIN} libtetra-1.0.0-2.i386.rpm LANG=C rpm -qp --queryformat %{POSTUN} libtetra-1.0.0-2.i386.rpm LANG=C rpm -qp --queryformat %{PREUN} libtetra-1.0.0-2.i386.rpm LANG=C rpm -qp --queryformat %{LICENSE} libtetra-1.0.0-2.i386.rpm LANG=C rpm -qp --queryformat %{PREIN} libtetra-1.0.0-2.i386.rpm LANG=C rpm -qcp libtetra-1.0.0-2.i386.rpm rpm -qpi libtetra-1.0.0-2.i386.rpm LANG=C rpm -qpl libtetra-1.0.0-2.i386.rpm mkdir libtetra-1.0.0 chmod 755 libtetra-1.0.0 rpm2cpio libtetra-1.0.0-2.i386.rpm | lzma -t -q > /dev/null 2>&1 rpm2cpio libtetra-1.0.0-2.i386.rpm | (cd libtetra-1.0.0; cpio --extract --make-directories --no-absolute-filenames --preserve-modification-time) 2>&1 chmod 755 libtetra-1.0.0/./ chmod 755 libtetra-1.0.0/./usr chmod 755 libtetra-1.0.0/./usr/lib chown 0:0 libtetra-1.0.0//usr/lib/libtetra.so.1.0.0 chmod 755 libtetra-1.0.0//usr/lib/libtetra.so.1.0.0 mkdir libtetra-1.0.0/debian date -R date -R chmod 755 libtetra-1.0.0/debian/rules debian/rules binary 2>&1 libtetra_1.0.0-3_i386.deb generated find libtetra-1.0.0 -type d -exec chmod 755 {} ; rm -rf libtetra-1.0.0 Very Verbose output LANG=C rpm -qp --queryformat %{NAME} libtetra-1.0.0-2.i386.rpm libtetra LANG=C rpm -qp --queryformat %{VERSION} libtetra-1.0.0-2.i386.rpm 1.0.0 LANG=C rpm -qp --queryformat %{RELEASE} libtetra-1.0.0-2.i386.rpm 2 LANG=C rpm -qp --queryformat %{ARCH} libtetra-1.0.0-2.i386.rpm i386 LANG=C rpm -qp --queryformat %{CHANGELOGTEXT} libtetra-1.0.0-2.i386.rpm - First RPM Package LANG=C rpm -qp --queryformat %{SUMMARY} libtetra-1.0.0-2.i386.rpm Panasonic KX-MC6000 series Printer Driver for Linux. LANG=C rpm -qp --queryformat %{DESCRIPTION} libtetra-1.0.0-2.i386.rpm This software is Panasonic KX-MC6000 series Printer Driver for Linux. You can print from applications by using CUPS(Common Unix Printing System) which is the printing system for Linux. Other functions for KX-MC6000 series are not supported by this software. LANG=C rpm -qp --queryformat %{PREFIXES} libtetra-1.0.0-2.i386.rpm (none) LANG=C rpm -qp --queryformat %{POSTIN} libtetra-1.0.0-2.i386.rpm (none) LANG=C rpm -qp --queryformat %{POSTUN} libtetra-1.0.0-2.i386.rpm (none) LANG=C rpm -qp --queryformat %{PREUN} libtetra-1.0.0-2.i386.rpm (none) LANG=C rpm -qp --queryformat %{LICENSE} libtetra-1.0.0-2.i386.rpm GPL and LGPL (Version2) LANG=C rpm -qp --queryformat %{PREIN} libtetra-1.0.0-2.i386.rpm (none) LANG=C rpm -qcp libtetra-1.0.0-2.i386.rpm rpm -qpi libtetra-1.0.0-2.i386.rpm Name : libtetra Relocations: (not relocatable) Version : 1.0.0 Vendor: Panasonic Communications Co., Ltd. Release : 2 Build Date: Tue 27 Apr 2010 05:16:40 AM EDT Install Date: (not installed) Build Host: localhost.localdomain Group : System Environment/Daemons Source RPM: libtetra-1.0.0-2.src.rpm Size : 31808 License: GPL and LGPL (Version2) Signature : (none) URL : http://panasonic.net/pcc/support/fax/world.htm Summary : Panasonic KX-MC6000 series Printer Driver for Linux. Description : This software is Panasonic KX-MC6000 series Printer Driver for Linux. You can print from applications by using CUPS(Common Unix Printing System) which is the printing system for Linux. Other functions for KX-MC6000 series are not supported by this software. LANG=C rpm -qpl libtetra-1.0.0-2.i386.rpm /usr/lib/libtetra.so /usr/lib/libtetra.so.1.0.0 mkdir libtetra-1.0.0 chmod 755 libtetra-1.0.0 rpm2cpio libtetra-1.0.0-2.i386.rpm | lzma -t -q > /dev/null 2>&1 rpm2cpio libtetra-1.0.0-2.i386.rpm | (cd libtetra-1.0.0; cpio --extract --make-directories --no-absolute-filenames --preserve-modification-time) 2>&1 63 blocks chmod 755 libtetra-1.0.0/./ chmod 755 libtetra-1.0.0/./usr chmod 755 libtetra-1.0.0/./usr/lib chown 0:0 libtetra-1.0.0//usr/lib/libtetra.so.1.0.0 chmod 755 libtetra-1.0.0//usr/lib/libtetra.so.1.0.0 mkdir libtetra-1.0.0/debian date -R Mon, 07 Feb 2011 11:03:58 -0500 date -R Mon, 07 Feb 2011 11:03:58 -0500 chmod 755 libtetra-1.0.0/debian/rules debian/rules binary 2>&1 dh_testdir dh_testdir dh_testroot dh_clean -k -d dh_clean: No packages to build. dh_installdirs dh_installdocs dh_installchangelogs find . -maxdepth 1 -mindepth 1 -not -name debian -print0 | \ xargs -0 -r -i cp -a {} debian/ dh_compress dh_makeshlibs dh_installdeb dh_shlibdeps dh_gencontrol dh_md5sums dh_builddeb libtetra_1.0.0-2_i386.deb generated find libtetra-1.0.0 -type d -exec chmod 755 {} ; rm -rf libtetra-1.0.0

  Read the article

• How to setup Dual Head with "radeon" driver for R770?

  - by user1709408

  I want to make dual head setup without xrandr but with Xinerama. I put "Screen 1" line into xorg.conf, but card still show identical output on DVI-2 and DVI-3 It is important to use xinerama for me (to glue three monitors), that's why i decide not to use ranrd (randr is incompatible with xinerama as i read somewhere) Here is my videocard (HD 4850 X2): lspci | grep R700 03:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI R700 [Radeon HD 4850] 04:00.0 Display controller: Advanced Micro Devices [AMD] nee ATI R700 [Radeon HD 4850] Here is how monitors are connected: grep "DVI" /var/log/Xorg.0.log [ 1210.002] (II) RADEON(0): Output DVI-0 using monitor section Monitor0 [ 1210.048] (II) RADEON(0): Output DVI-1 has no monitor section [ 1210.079] (II) RADEON(0): EDID for output DVI-0 [ 1210.080] (II) RADEON(0): Printing probed modes for output DVI-0 [ 1210.128] (II) RADEON(0): EDID for output DVI-1 [ 1210.128] (II) RADEON(0): Output DVI-0 connected [ 1210.128] (II) RADEON(0): Output DVI-1 disconnected [ 1210.128] (II) RADEON(0): Output DVI-0 using initial mode 1920x1200 [ 1210.160] (II) RADEON(1): Output DVI-2 using monitor section Monitor2 [ 1210.215] (II) RADEON(1): Output DVI-3 has no monitor section [ 1210.246] (II) RADEON(1): EDID for output DVI-2 [ 1210.247] (II) RADEON(1): Printing probed modes for output DVI-2 [ 1210.299] (II) RADEON(1): EDID for output DVI-3 [ 1210.300] (II) RADEON(1): Printing probed modes for output DVI-3 [ 1210.300] (II) RADEON(1): Output DVI-2 connected [ 1210.300] (II) RADEON(1): Output DVI-3 connected [ 1210.300] (II) RADEON(1): Output DVI-2 using initial mode 1920x1200 [ 1210.300] (II) RADEON(1): Output DVI-3 using initial mode 1920x1200 Here is my /etc/X11/xorg.conf Section "ServerFlags" Option "RandR" "0" Option "Xinerama" "1" EndSection Section "ServerLayout" Identifier "Three Head Layout" Screen "MyPrecious0" Screen "MyPrecious2" RightOf "MyPrecious0" Screen "MyPrecious3" LeftOf "MyPrecious0" EndSection Section "Screen" Identifier "MyPrecious0" Monitor "Monitor0" Device "Device300" EndSection Section "Screen" Identifier "MyPrecious2" Monitor "Monitor2" Device "Device400" EndSection Section "Screen" Identifier "MyPrecious3" Monitor "Monitor3" Device "Device401" EndSection Section "Device" Identifier "Device300" BusID "PCI:3:0:0" Screen 0 Driver "radeon" EndSection Section "Device" Identifier "Device400" BusID "PCI:4:0:0" Screen 0 Driver "radeon" EndSection Section "Device" Identifier "Device401" BusID "PCI:4:0:0" Screen 1 Driver "radeon" EndSection Section "Monitor" Identifier "Monitor0" EndSection Section "Monitor" Identifier "Monitor2" EndSection Section "Monitor" Identifier "Monitor3" EndSection I tried to switch to vesa driver (didn't work for me) I tried to add options like Option "ZaphodHeads" "DVI-2" and Option "ZaphodHeads" "DVI-3" into sections "Device 400" and "Device 401" (this didn't help because "ZaphodHeads" option is for ranrd, and randr is disabled by decision) I tried to merge sections "Device 400" and "Device 401" into one section and add Option "ZaphodHeads" "DVI-2,DVI-3" (see comment about randr above) single section setup helps to change log line RADEON(1): Output DVI-3 has no monitor section into RADEON(1): Output DVI-3 using monitor section Monitor3 but nothing was enough to switch from screen cloning to separate screens. This problem (lack of documentation on radeon driver) is similar to these: Radeon display driver clones monitors while using Xinerama (moderators decision to close that problem was wrong) Ubuntu 12.10 multi-monitor setup isn't working The problem is solvable, because this hardware worked as three headed for me earlier with gentoo/xorg-server-1.3 Xorg -configure creates setup for the first monitor on the first GPU Please don't advise to use fglrx/aticonfig/amdcccle (this goes against my religion beliefs)

  Read the article

• TFS API-Process Template currently applied to the Team Project

  - by Tarun Arora

  Download Demo Solution - here In this blog post I’ll show you how to use the TFS API to get the name of the Process Template that is currently applied to the Team Project. You can also download the demo solution attached, I’ve tested this solution against TFS 2010 and TFS 2011.    1. Connecting to TFS Programmatically I have a blog post that shows you from where to download the VS 2010 SP1 SDK and how to connect to TFS programmatically. private TfsTeamProjectCollection _tfs; private string _selectedTeamProject;   TeamProjectPicker tfsPP = new TeamProjectPicker(TeamProjectPickerMode.SingleProject, false); tfsPP.ShowDialog(); this._tfs = tfsPP.SelectedTeamProjectCollection; this._selectedTeamProject = tfsPP.SelectedProjects[0].Name; 2. Programmatically get the Process Template details of the selected Team Project I’ll be making use of the VersionControlServer service to get the Team Project details and the ICommonStructureService to get the Project Properties. private ProjectProperty[] GetProcessTemplateDetailsForTheSelectedProject() { var vcs = _tfs.GetService<VersionControlServer>(); var ics = _tfs.GetService<ICommonStructureService>(); ProjectProperty[] ProjectProperties = null; var p = vcs.GetTeamProject(_selectedTeamProject); string ProjectName = string.Empty; string ProjectState = String.Empty; int templateId = 0; ProjectProperties = null; ics.GetProjectProperties(p.ArtifactUri.AbsoluteUri, out ProjectName, out ProjectState, out templateId, out ProjectProperties); return ProjectProperties; } 3. What’s the catch? The ProjectProperties will contain a property “Process Template” which as a value has the name of the process template. So, you will be able to use the below line of code to get the name of the process template. var processTemplateName = processTemplateDetails.Where(pt => pt.Name == "Process Template").Select(pt => pt.Value).FirstOrDefault();   However, if the process template does not contain the property “Process Template” then you will need to add it. So, the question becomes how do i add the Name property to the Process Template. Download the Process Template from the Process Template Manager on your local        Once you have downloaded the Process Template to your local machine, navigate to the Classification folder with in the template       From the classification folder open Classification.xml        Add a new property <property name=”Process Template” value=”MSF for CMMI Process Improvement v5.0” />           4. Putting it all together… using System; using System.Collections.Generic; using System.ComponentModel; using System.Data; using System.Drawing; using System.Linq; using System.Text; using System.Windows.Forms; using Microsoft.TeamFoundation.Client; using Microsoft.TeamFoundation.VersionControl.Client; using Microsoft.TeamFoundation.Server; using System.Diagnostics; using Microsoft.TeamFoundation.WorkItemTracking.Client; namespace TfsAPIDemoProcessTemplate { public partial class Form1 : Form { public Form1() { InitializeComponent(); } private TfsTeamProjectCollection _tfs; private string _selectedTeamProject; private void btnConnect_Click(object sender, EventArgs e) { TeamProjectPicker tfsPP = new TeamProjectPicker(TeamProjectPickerMode.SingleProject, false); tfsPP.ShowDialog(); this._tfs = tfsPP.SelectedTeamProjectCollection; this._selectedTeamProject = tfsPP.SelectedProjects[0].Name; var processTemplateDetails = GetProcessTemplateDetailsForTheSelectedProject(); listBox1.Items.Clear(); listBox1.Items.Add(String.Format("Team Project Selected => '{0}'", _selectedTeamProject)); listBox1.Items.Add(Environment.NewLine); var processTemplateName = processTemplateDetails.Where(pt => pt.Name == "Process Template") .Select(pt => pt.Value).FirstOrDefault(); if (!string.IsNullOrEmpty(processTemplateName)) { listBox1.Items.Add(Environment.NewLine); listBox1.Items.Add(String.Format("Process Template Name: {0}", processTemplateName)); } else { listBox1.Items.Add(String.Format("The Process Template does not have the 'Name' property set up")); listBox1.Items.Add(String.Format("***TIP: Download the Process Template and in Classification.xml add a new property Name, update the template then you will be able to see the Process Template Name***")); listBox1.Items.Add(String.Format(" - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -")); } } private ProjectProperty[] GetProcessTemplateDetailsForTheSelectedProject() { var vcs = _tfs.GetService<VersionControlServer>(); var ics = _tfs.GetService<ICommonStructureService>(); ProjectProperty[] ProjectProperties = null; var p = vcs.GetTeamProject(_selectedTeamProject); string ProjectName = string.Empty; string ProjectState = String.Empty; int templateId = 0; ProjectProperties = null; ics.GetProjectProperties(p.ArtifactUri.AbsoluteUri, out ProjectName, out ProjectState, out templateId, out ProjectProperties); return ProjectProperties; } } } Thank you for taking the time out and reading this blog post. If you enjoyed the post, remember to subscribe to http://feeds.feedburner.com/TarunArora. Have you come across a better way of doing this, please share your experience here. Questions/Feedback/Suggestions, etc please leave a comment. Thank You! Share this post : CodeProject

  Read the article

• HTG Explains: Why is Printer Ink So Expensive?

  - by Chris Hoffman

  Printer ink is expensive, more expensive per drop than fine champagne or even human blood. If you haven’t gone paperless, you’ll notice that you’re paying a lot for new ink cartridges — more than seems reasonable. Purchasing the cheapest inkjet printer and buying official ink cartridge replacements is the most expensive thing you can do. There are ways to save money on ink if you must continue to print documents. Cheap Printers, Expensive Ink Ink jet printers are often very cheap. That’s because they’re sold at cost, or even at a loss — the manufacturer either makes no profit from the printer itself or loses money. The manufacturer will make most of its money from the printer cartridges you buy later. Even if the company does make a bit of money from each printer sold, it makes a much larger profit margin on ink. Rather than selling you a printer that may be rather expensive, they want to sell you a cheap printer and make money on an ongoing basis by providing expensive printer ink. It’s been compared to the razor model — sell a razor cheaply and mark up the razor blades. Rather than making a one-time profit on the razor, you’ll make continuing profit as the customer keeps buying razor blade replacements — or ink, in this case. Many printer manufacturers go out of their way to make it difficult for you to use unofficial ink cartridges, building microchips into their official ink cartridges. If you use an unofficial cartridge or refill an official cartridge, the printer may refuse to use it. Lexmark once argued in court that unofficial microchips that enable third-party ink cartridges would violate their copyright and Lexmark has argued that creating an unofficial microchip to bypass this restriction on third-party ink would violate Lexmark’s copyright and be illegal under the US DMCA. Luckily, they lost this argument. What Printer Companies Say Printer companies have put forth their own arguments in the past, attempting to justify the high cost of official ink cartridges and microchips that block any competition. In a Computer World story from 2010, HP argued that they spend a billion dollars each year on “ink research and development.” They point out that printer ink “must be formulated to withstand heating to 300 degrees, vaporization, and being squirted at 30 miles per hour, at a rate of 36,000 drops per second, through a nozzle one third the size of a human hair. After all that it must dry almost instantly on the paper.” They also argue that printers have become more efficient and use less ink to print, while third-party cartridges are less reliable. Companies that use microchips in their ink cartridges argue that only the microchip has the ability to enforce an expiration date, preventing consumers from using old ink cartridges. There’s something to all these arguments, sure — but they don’t seem to justify the sky-high cost of printer ink or the restriction on using third-party or refilled cartridges. Saving Money on Printing Ultimately, the price of something is what people are willing to pay and printer companies have found that most consumers are willing to pay this much for ink cartridge replacements. Try not to fall for it: Don’t buy the cheapest inkjet printer. Consider your needs when buying a printer and do some research. You’ll save more money in the long run. Consider these basic tips to save money on printing: Buy Refilled Cartridges: Refilled cartridges from third parties are generally much cheaper. Printer companies warn us away from these, but they often work very well. Refill Your Own Cartridges: You can get do-it-yourself kits for refilling your own printer ink cartridges, but this can be messy. Your printer may refuse to accept a refilled cartridge if the cartridge contains a microchip. Switch to a Laser Printer: Laser printers use toner, not ink cartridges. If you print a lot of black and white documents, a laser printer can be cheaper. Buy XL Cartridges: If you are buying official printer ink cartridges, spend more money each time. The cheapest ink cartridges won’t contain much ink at all, while larger “XL” ink cartridges will contain much more ink for only a bit more money. It’s often cheaper to buy in bulk. Avoid Printers With Tri-Color Ink Cartridges: If you’re printing color documents, you’ll want to get a printer that uses separate ink cartridges for all its colors. For example, let’s say your printer has a “Color” cartridge that contains blue, green, and red ink. If you print a lot of blue documents and use up all your blue ink, the Color cartridge will refuse to function — now all you can do is throw away your cartridge and buy a new one, even if the green and red ink chambers are full. If you had a printer with separate color cartridges, you’d just have to replace the blue cartridge. If you’ll be buying official ink cartridges, be sure to compare the cost of cartridges when buying a printer. The cheapest printer may be more expensive in the long run. Of course, you’ll save the most money if you stop printing entirely and go paperless, keeping digital copies of your documents instead of paper ones. Image Credit: Cliva Darra on Flickr     

  Read the article

• Alien deletes .deb when converting from .rpm

  - by Stann

  I'm trying to convert .rpm to .deb using alien. sudo alien -k libtetra-1.0.0-2.i386.rpm Alien says that: libtetra-1.0.0-2.i386.deb generated But when I check the folder - there is just original .rpm and no .deb. Also - I can see that for a split second there is a .deb file in a folder. so it looks like alien create .deb and deletes it right away. I suspect that it's maybe because I run 64 bit os and package is 32? Can somebody explain why alien deletes .deb automatically? Verbose output: LANG=C rpm -qp --queryformat %{NAME} libtetra-1.0.0-2.i386.rpm LANG=C rpm -qp --queryformat %{VERSION} libtetra-1.0.0-2.i386.rpm LANG=C rpm -qp --queryformat %{RELEASE} libtetra-1.0.0-2.i386.rpm LANG=C rpm -qp --queryformat %{ARCH} libtetra-1.0.0-2.i386.rpm LANG=C rpm -qp --queryformat %{CHANGELOGTEXT} libtetra-1.0.0-2.i386.rpm LANG=C rpm -qp --queryformat %{SUMMARY} libtetra-1.0.0-2.i386.rpm LANG=C rpm -qp --queryformat %{DESCRIPTION} libtetra-1.0.0-2.i386.rpm LANG=C rpm -qp --queryformat %{PREFIXES} libtetra-1.0.0-2.i386.rpm LANG=C rpm -qp --queryformat %{POSTIN} libtetra-1.0.0-2.i386.rpm LANG=C rpm -qp --queryformat %{POSTUN} libtetra-1.0.0-2.i386.rpm LANG=C rpm -qp --queryformat %{PREUN} libtetra-1.0.0-2.i386.rpm LANG=C rpm -qp --queryformat %{LICENSE} libtetra-1.0.0-2.i386.rpm LANG=C rpm -qp --queryformat %{PREIN} libtetra-1.0.0-2.i386.rpm LANG=C rpm -qcp libtetra-1.0.0-2.i386.rpm rpm -qpi libtetra-1.0.0-2.i386.rpm LANG=C rpm -qpl libtetra-1.0.0-2.i386.rpm mkdir libtetra-1.0.0 chmod 755 libtetra-1.0.0 rpm2cpio libtetra-1.0.0-2.i386.rpm | lzma -t -q > /dev/null 2>&1 rpm2cpio libtetra-1.0.0-2.i386.rpm | (cd libtetra-1.0.0; cpio --extract --make-directories --no-absolute-filenames --preserve-modification-time) 2>&1 chmod 755 libtetra-1.0.0/./ chmod 755 libtetra-1.0.0/./usr chmod 755 libtetra-1.0.0/./usr/lib chown 0:0 libtetra-1.0.0//usr/lib/libtetra.so.1.0.0 chmod 755 libtetra-1.0.0//usr/lib/libtetra.so.1.0.0 mkdir libtetra-1.0.0/debian date -R date -R chmod 755 libtetra-1.0.0/debian/rules debian/rules binary 2>&1 libtetra_1.0.0-3_i386.deb generated find libtetra-1.0.0 -type d -exec chmod 755 {} ; rm -rf libtetra-1.0.0 Very Verbose output LANG=C rpm -qp --queryformat %{NAME} libtetra-1.0.0-2.i386.rpm libtetra LANG=C rpm -qp --queryformat %{VERSION} libtetra-1.0.0-2.i386.rpm 1.0.0 LANG=C rpm -qp --queryformat %{RELEASE} libtetra-1.0.0-2.i386.rpm 2 LANG=C rpm -qp --queryformat %{ARCH} libtetra-1.0.0-2.i386.rpm i386 LANG=C rpm -qp --queryformat %{CHANGELOGTEXT} libtetra-1.0.0-2.i386.rpm - First RPM Package LANG=C rpm -qp --queryformat %{SUMMARY} libtetra-1.0.0-2.i386.rpm Panasonic KX-MC6000 series Printer Driver for Linux. LANG=C rpm -qp --queryformat %{DESCRIPTION} libtetra-1.0.0-2.i386.rpm This software is Panasonic KX-MC6000 series Printer Driver for Linux. You can print from applications by using CUPS(Common Unix Printing System) which is the printing system for Linux. Other functions for KX-MC6000 series are not supported by this software. LANG=C rpm -qp --queryformat %{PREFIXES} libtetra-1.0.0-2.i386.rpm (none) LANG=C rpm -qp --queryformat %{POSTIN} libtetra-1.0.0-2.i386.rpm (none) LANG=C rpm -qp --queryformat %{POSTUN} libtetra-1.0.0-2.i386.rpm (none) LANG=C rpm -qp --queryformat %{PREUN} libtetra-1.0.0-2.i386.rpm (none) LANG=C rpm -qp --queryformat %{LICENSE} libtetra-1.0.0-2.i386.rpm GPL and LGPL (Version2) LANG=C rpm -qp --queryformat %{PREIN} libtetra-1.0.0-2.i386.rpm (none) LANG=C rpm -qcp libtetra-1.0.0-2.i386.rpm rpm -qpi libtetra-1.0.0-2.i386.rpm Name : libtetra Relocations: (not relocatable) Version : 1.0.0 Vendor: Panasonic Communications Co., Ltd. Release : 2 Build Date: Tue 27 Apr 2010 05:16:40 AM EDT Install Date: (not installed) Build Host: localhost.localdomain Group : System Environment/Daemons Source RPM: libtetra-1.0.0-2.src.rpm Size : 31808 License: GPL and LGPL (Version2) Signature : (none) URL : http://panasonic.net/pcc/support/fax/world.htm Summary : Panasonic KX-MC6000 series Printer Driver for Linux. Description : This software is Panasonic KX-MC6000 series Printer Driver for Linux. You can print from applications by using CUPS(Common Unix Printing System) which is the printing system for Linux. Other functions for KX-MC6000 series are not supported by this software. LANG=C rpm -qpl libtetra-1.0.0-2.i386.rpm /usr/lib/libtetra.so /usr/lib/libtetra.so.1.0.0 mkdir libtetra-1.0.0 chmod 755 libtetra-1.0.0 rpm2cpio libtetra-1.0.0-2.i386.rpm | lzma -t -q > /dev/null 2>&1 rpm2cpio libtetra-1.0.0-2.i386.rpm | (cd libtetra-1.0.0; cpio --extract --make-directories --no-absolute-filenames --preserve-modification-time) 2>&1 63 blocks chmod 755 libtetra-1.0.0/./ chmod 755 libtetra-1.0.0/./usr chmod 755 libtetra-1.0.0/./usr/lib chown 0:0 libtetra-1.0.0//usr/lib/libtetra.so.1.0.0 chmod 755 libtetra-1.0.0//usr/lib/libtetra.so.1.0.0 mkdir libtetra-1.0.0/debian date -R Mon, 07 Feb 2011 11:03:58 -0500 date -R Mon, 07 Feb 2011 11:03:58 -0500 chmod 755 libtetra-1.0.0/debian/rules debian/rules binary 2>&1 dh_testdir dh_testdir dh_testroot dh_clean -k -d dh_clean: No packages to build. dh_installdirs dh_installdocs dh_installchangelogs find . -maxdepth 1 -mindepth 1 -not -name debian -print0 | \ xargs -0 -r -i cp -a {} debian/ dh_compress dh_makeshlibs dh_installdeb dh_shlibdeps dh_gencontrol dh_md5sums dh_builddeb libtetra_1.0.0-2_i386.deb generated find libtetra-1.0.0 -type d -exec chmod 755 {} ; rm -rf libtetra-1.0.0 Resolution Oh well. It looks like it's perhaps a bug? or I don't know. I simply installed 32-bit version of Ubuntu in VirtualBox and converted package there. For some reason I couldn't convert 32-bit package in 64 OS. and that is that. If someone ever finds the reason ffor this behavior - plz. post somewhere in comments. Thanks

  Read the article

• Silverlight Cream for April 18, 2010 -- #840

  - by Dave Campbell

  In this Issue: CrocusGirl, Giorgetti Alessandro(-2-), smartyP, Pete Brown, David Poll, David Anson, and Bill Reiss. Shoutouts: Yasser Makram has a post up discussing Human Centered ALM with Telerik TeamPulse and Team Foundation Server. I saw this demo'd at DevConnnections and it definitely deserves a look. Shawn Wildermuth posted his materials from DevConnections all on one post: Back from DevConnections with SourceCode Shawn Wildermuth also posted an Updated RIA Services + MVVM Example Laurent Bugnion announced a Small change in MVVM Light Toolkit templates for Blend 4 RC Laurent Bugnion also announced Crowdsourcing MVVM Light Toolkit support The Expression Blend and Design Blog announced Expression Blend 4 Release Candidate Available! Dan Wahlin posted Slides and Code from my Silverlight MVVM Talk at DevConnections From SilverlightCream.com: Windows Phone 7 Design Notes – Part#1: Metro Resources CrocusGirl has blogged about WP7 and the Metro design concept. She has a bunch of resources up and information about Metro and the design methodology. Stay tuned for Part 2. Silverlight, M-V-VM ... and IoC - part 1 Giorgetti Alessandro has part 1 of a multi-parter up on IoC and MVVM for LOB apps in Silverlight ... a pretty quick into to MVVM. Silverlight, M-V-VM … and IoC – part 2 Giorgetti Alessandro also posted part 2 of his series, and this one digs deeper into the code and discusses what goes into the view and the model. Using the Facebook Developer Toolkit With Windows Phone 7 smartyP has a post addressing using the Facebook Developer toolkit with WP7... it took some hacking, and he explains it, and provides it for download. Silverlight and WPF Tip: Fitting items in a ListBox Having trouble fitting items into a Listbox in Silverlight or WPF without getting horizontal scrollbars? Pete Brown has a solution for you in 4 steps. Making printing easier in Silverlight 4 David Poll has a great detailed post up about printing in SL4, taking it to building a higher-level API that allows printing of collections... all demos and source included. Detailed information about the Silverlight Toolkit's new stacked series support David Anson details the improvements to Data Visualization in the Toolkit release from last week. Space Rocks game step 9: the asteroid sprite Bill Reiss has his latest game episode up and this time he's putting asteroid sprites in play. No placement, movement, or collisions yet, but it's a beginning. And, he's updated all his code to Silverlight 4. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

  Read the article

• Multithreading synchronization interview question: Find n words given m threads

  - by rplusg

  I came across this question: You are given a paragraph , which contain n number of words, you are given m threads. What you need to do is , each thread should print one word and give the control to next thread, this way each thread will keep on printing one word , in case last thread come, it should invoke the first thread. Printing will repeat until all the words are printed in paragraph. Finally all threads should exit gracefully. What kind of synchronization will use? I strongly feel we cannot take any advantage of threads here but interviewer is trying to understand my synchronization skills? No need of code, just put some thoughts. I will implement by myself.

  Read the article

• Documentation Changes in Solaris 11.1

  - by alanc

  One of the first places you can see Solaris 11.1 changes are in the docs, which have now been posted in the Solaris 11.1 Library on docs.oracle.com. I spent a good deal of time reviewing documentation for this release, and thought some would be interesting to blog about, but didn't review all the changes (not by a long shot), and am not going to cover all the changes here, so there's plenty left for you to discover on your own. Just comparing the Solaris 11.1 Library list of docs against the Solaris 11 list will show a lot of reorganization and refactoring of the doc set, especially in the system administration guides. Hopefully the new break down will make it easier to get straight to the sections you need when a task is at hand. Packaging System Unfortunately, the excellent in-depth guide for how to build packages for the new Image Packaging System (IPS) in Solaris 11 wasn't done in time to make the initial Solaris 11 doc set. An interim version was published shortly after release, in PDF form on the OTN IPS page. For Solaris 11.1 it was included in the doc set, as Packaging and Delivering Software With the Image Packaging System in Oracle Solaris 11.1, so should be easier to find, and easier to share links to specific pages the HTML version. Beyond just how to build a package, it includes details on how Solaris is packaged, and how package updates work, which may be useful to all system administrators who deal with Solaris 11 upgrades & installations. The Adding and Updating Oracle Solaris 11.1 Software Packages was also extended, including new sections on Relaxing Version Constraints Specified by Incorporations and Locking Packages to a Specified Version that may be of interest to those who want to keep the Solaris 11 versions of certain packages when they upgrade, such as the couple of packages that had functionality removed by an (unusual for an update release) End of Feature process in the 11.1 release. Also added in this release is a document containing the lists of all the packages in each of the major package groups in Solaris 11.1 (solaris-desktop, solaris-large-server, and solaris-small-server). While you can simply get the contents of those groups from the package repository, either via the web interface or the pkg command line, the documentation puts them in handy tables for easier side-by-side comparison, or viewing the lists before you've installed the system to pick which one you want to initially install. X Window System We've not had good X11 coverage in the online Solaris docs in a while, mostly relying on the man pages, and upstream X.Org docs. In this release, we've integrated some X coverage into the Solaris 11.1 Desktop Adminstrator's Guide, including sections on installing fonts for fontconfig or legacy X11 clients, X server configuration, and setting up remote access via X11 or VNC. Of course we continue to work on improving the docs, including a lot of contributions to the upstream docs all OS'es share (more about that another time). Security One of the things Oracle likes to do for its products is to publish security guides for administrators & developers to know how to build systems that meet their security needs. For Solaris, we started this with Solaris 11, providing a guide for sysadmins to find where the security relevant configuration options were documented. The Solaris 11.1 Security Guidelines extend this to cover new security features, such as Address Space Layout Randomization (ASLR) and Read-Only Zones, as well as adding additional guidelines for existing features, such as how to limit the size of tmpfs filesystems, to avoid users driving the system into swap thrashing situations. For developers, the corresponding document is the Developer's Guide to Oracle Solaris 11 Security, which has been the source for years for documentation of security-relevant Solaris API's such as PAM, GSS-API, and the Solaris Cryptographic Framework. For Solaris 11.1, a new appendix was added to start providing Secure Coding Guidelines for Developers, leveraging the CERT Secure Coding Standards and OWASP guidelines to provide the base recommendations for common programming languages and their standard API's. Solaris specific secure programming guidance was added via links to other documentation in the product doc set. In parallel, we updated the Solaris C Libary Functions security considerations list with details of Solaris 11 enhancements such as FD_CLOEXEC flags, additional *at() functions, and new stdio functions such as asprintf() and getline(). A number of code examples throughout the Solaris 11.1 doc set were updated to follow these recommendations, changing unbounded strcpy() calls to strlcpy(), sprintf() to snprintf(), etc. so that developers following our examples start out with safer code. The Writing Device Drivers guide even had the appendix updated to list which of these utility functions, like snprintf() and strlcpy(), are now available via the Kernel DDI. Little Things Of course all the big new features got documented, and some major efforts were put into refactoring and renovation, but there were also a lot of smaller things that got fixed as well in the nearly a year between the Solaris 11 and 11.1 doc releases - again too many to list here, but a random sampling of the ones I know about & found interesting or useful: The Privileges section of the DTrace Guide now gives users a pointer to find out how to set up DTrace privileges for non-global zones and what limitations are in place there. A new section on Recommended iSCSI Configuration Practices was added to the iSCSI configuration section when it moved into the SAN Configuration and Multipathing administration guide. The Managing System Power Services section contains an expanded explanation of the various tunables for power management in Solaris 11.1. The sample dcmd sources in /usr/demo/mdb were updated to include ::help output, so that developers like myself who follow the examples don't forget to include it (until a helpful code reviewer pointed it out while reviewing the mdb module changes for Xorg 1.12). The README file in that directory was updated to show the correct paths for installing both kernel & userspace modules, including the 64-bit variants.

  Read the article

• HTG Explains: Why Does Photo Paper Improve Print Quality?

  - by Eric Z Goodnight

  So you’ve shelled out the money for a fancy inkjet photo printer, only you’re not impressed with the images you’re getting out of your standard office paper. Have you ever wondered why that photo paper works so much better? Surely, paper is paper, right? What can be so special about it? In this article, we’ll explore the differences between regular typing paper, why these differences are good for printing, and how to take advantage of them for superior photographic printing Latest Features How-To Geek ETC The 50 Best Registry Hacks that Make Windows Better The How-To Geek Holiday Gift Guide (Geeky Stuff We Like) LCD? LED? Plasma? The How-To Geek Guide to HDTV Technology The How-To Geek Guide to Learning Photoshop, Part 8: Filters Improve Digital Photography by Calibrating Your Monitor Our Favorite Tech: What We’re Thankful For at How-To Geek Settle into Orbit with the Voyage Theme for Chrome and Iron Awesome Safari Compass Icons Set Escape from the Exploding Planet Wallpaper Move Your Tumblr Blog to WordPress Pytask is an Easy to Use To-Do List Manager for Your Ubuntu System Snowy Christmas House Personas Theme for Firefox

  Read the article

• Ubuntu samba file and print server

  - by Gerd

  I am using an old Dell desktop PC as a samba file and print server for a Windows 7 network. The version of Unbuntu I am running is 12.04 which seems to big for the RAM and disk space I have available. Unbuntu 12.04 runs very very slow, the printing over the home network works at a quite acceptable speed. I have two problems: SLOW Ubuntu and I cannot update samba. The update manager tells me "update failed". So my two questions: Is there anything I can remove from the standard 12.04 installation to make Ubuntu run faster and should I uninstall and the reinstall samba to overcome the "update failed" problem? I hesitate, as printing and file serving works somehow and I don't want to loose that. I know I should give you more information to give me answers. But what would you need to know? I am not a natural Linux user. Windows 7 is still my home. Thanks in advance, Gerd

  Read the article

• "System call failed" error when trying to open "My Computer" etc. under the Start menu! What is happening?

  - by verve

  When I go to the start menu I can load program icons but if I click on Documents, My Pictures, My Computer, Default Programs...all the options on the right part--I get "System call failed". How do I solve ths? Is my HD failing? Also, I don't know if it's connected but yesterday my uTorrent stopped working in a way it has never done before. I'm not able to download torrent files. In the program I get "socket unreacheable..." Also, for the last 2 days my internet has been super-slow. I checked Kaspersky for viruses. It says: "No active threats". Windows 7 64-bit.

  Read the article

• How do I configure the Google Chrome / Chromium address bar to perform a search instead of trying to access a file on the local file system?

  - by Daniel Kauffman

  How do I configure the Google Chrome / Chromium address bar to perform a search instead of trying to access a file on the local file system? I would like to be able to enter a file name in the address bar and to see Google search results for that file name similar to what I would see if I searched for the file name using something like https://www.google.com/#q=/path/to/interesting/file I am able to disable the file scheme using either of the following policy settings: "DisabledSchemes": ["file"], Which has been deprecated in favor of: "URLBlacklist": ["file://"], But in either case Google Chrome / Chromium continues to auto-detect that a file name was entered, automatically prepends the file scheme to the file name, and then reports that the webpage is blocked.

  Read the article

• Stack Overflow Problem in DotNetNuke

  - by Vivek

  Hi, I'm getting this error message when I try to access my website. Can someone please tell me what is going on? Thanks. V Server Error in '/' Application. Attempted to read or write protected memory. This is often an indication that other memory is corrupt. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.AccessViolationException: Attempted to read or write protected memory. This is often an indication that other memory is corrupt. Source Error: An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace: [AccessViolationException: Attempted to read or write protected memory. This is often an indication that other memory is corrupt.] AspDotNetStorefrontExcelWrapper.ExcelToXml.SetLicense() +0 AspDotNetStorefrontCommon.AppLogic.ApplicationStart() +150 AspDotNetStorefrontDNNComponents.AppStart..cctor() +103 [TypeInitializationException: The type initializer for 'AspDotNetStorefrontDNNComponents.AppStart' threw an exception.] AspDotNetStorefrontDNNComponents.AppStart.Execute() +0 AspDotNetStorefront.HttpModules.InitializerModule.System.Web.IHttpModule.Init(HttpApplication context) +42 System.Web.HttpApplication.InitModulesCommon() +65 System.Web.HttpApplication.InitModules() +43 System.Web.HttpApplication.InitInternal(HttpContext context, HttpApplicationState state, MethodInfo[] handlers) +729 System.Web.HttpApplicationFactory.GetNormalApplicationInstance(HttpContext context) +298 System.Web.HttpApplicationFactory.GetApplicationInstance(HttpContext context) +107 System.Web.HttpRuntime.ProcessRequestInternal(HttpWorkerRequest wr) +289 Version Information: Microsoft .NET Framework Version:2.0.50727.3082; ASP.NET Version:2.0.50727.3082

  Read the article

• Binding Image.Source to String in WPF ?

  - by Mohammad

  I have below XAML code : <Window x:Class="WpfApplication1.Window1" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" DataContext="{Binding RelativeSource={RelativeSource Self}}" WindowStartupLocation="CenterScreen" Title="Window1" Height="300" Width="300"> <Grid> <Image x:Name="TestImage" Source="{Binding Path=ImageSource}" /> </Grid> </Window> Also, there is a method that makes an Image from a Base64 string : Image Base64StringToImage(string base64ImageString) { try { byte[] b; b = Convert.FromBase64String(base64ImageString); MemoryStream ms = new System.IO.MemoryStream(b); System.Drawing.Image img = System.Drawing.Image.FromStream(ms); ////////////////////////////////////////////// //convert System.Drawing.Image to WPF image System.Drawing.Bitmap bmp = new System.Drawing.Bitmap(img); IntPtr hBitmap = bmp.GetHbitmap(); System.Windows.Media.ImageSource imageSource = System.Windows.Interop.Imaging.CreateBitmapSourceFromHBitmap(hBitmap, IntPtr.Zero, Int32Rect.Empty, BitmapSizeOptions.FromEmptyOptions()); Image wpfImage = new Image(); wpfImage.Source = imageSource; wpfImage.Width = wpfImage.Height = 16; ////////////////////////////////////////////// return wpfImage; } catch { Image img1 = new Image(); img1.Source = new BitmapImage(new Uri(@"/passwordManager;component/images/TreeView/empty-bookmark.png", UriKind.Relative)); img1.Width = img1.Height = 16; return img1; } } Now, I'm gonna bind TestImage to the output of Base64StringToImage method. I've used the following way : public string ImageSource { get; set; } ImageSource = Base64StringToImage("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").Source.ToString(); but nothing happen. How can I fix it ? BTW, I'm dead sure that the base64 string is correct

  Read the article

• how to send image to remote server using webservices in android only save to byte array retrieve ima

  - by narasimha

  hi sir i am implemented this code public class ImageTest extends Activity { /** Called when the activity is first created. */ @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.main); ImageView image = (ImageView) findViewById(R.id.picview); EditText value=(EditText)findViewById(R.id.EditText01); FileInputStream in; BufferedInputStream buf; try { in = new FileInputStream("/sdcard/pictures/1.jpg"); buf = new BufferedInputStream(in,1070); System.out.println("1.................."+buf); byte[] bMapArray= new byte[buf.available()]; buf.read(bMapArray); System.out.println("2................."+buf.read(bMapArray)); Bitmap bMap = BitmapFactory.decodeByteArray(bMapArray, 0, bMapArray.length); for (int i = 0; i < bMapArray.length; i++) { System.out.print(bMapArray[i]); } System.out.println("3......................"+bMap); System.out.println("4........bitmaparray"+bMap.extractAlpha()); System.out.println("5......................"+bMapArray); System.out.println("6......................"+ bMapArray.length); image.setImageBitmap(bMap); value.setText(bMapArray.length); if (in != null) { in.close(); } if (buf != null) { buf.close(); } } catch (Exception e) { Log.e("Error reading file", e.toString()); } } } 04-14 11:46:16.543: INFO/System.out(736): 2.................-1 3......................android.graphics.Bitmap@435a2d98 4........bitmaparrayandroid.graphics.Bitmap@435a3310 5......................[B@435a2758 6......................1035

  Read the article

• Ado.net dataservices BeginExecuteBatch call works on development fails on production server with Obj

  - by Mike Morley

  We have an ado.net dataservices 1.0 call that is being passed to a [WebGet] service operation as a batch through BeginExecuteBatch. Everything works perfectly on our development server - we have the project configured to use IIS instead of the cassini web server to make it as close to our production server as we can. When we publish to the production server, all the service operations work perfectly except the batch call, which fails with Object does not match target type. . I have not been able to find any cause for this. I can even run a single non-batch style GET operation against the [WebGet] service by copying the URL used in the batch and pasting it in a browser. I have not been able to find any information to help me solve this - any guidance would be most appreciated. Thanks, Mike M. Error message From Fiddler: HTTP/1.1 500 Internal Server Error Content-Type: application/xml DataServiceVersion: 1.0; An error occurred while processing this request. Object does not match target type. System.Reflection.TargetException at System.Reflection.RuntimeMethodInfo.CheckConsistency(Object target) at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks) at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture) at System.Data.Services.RequestUriProcessor.CreateFirstSegment(IDataService service, String identifier, Boolean checkRights, String queryPortion, Boolean& crossReferencingUrl) at System.Data.Services.RequestUriProcessor.CreateSegments(String[] segments, IDataService service) at System.Data.Services.RequestUriProcessor.ProcessRequestUri(Uri absoluteRequestUri, IDataService service) at System.Data.Services.DataService`1.BatchDataService.HandleBatchContent(Stream responseStream)

  Read the article

• Blob container creation exception ...

  - by Egon

  I get an exception every time I try to create a container for the blob using the following code blobStorageType = storageAccInfo.CreateCloudBlobClient(); ContBlob = blobStorageType.GetContainerReference(containerName); //everything fine till here ; next line creates an exception ContBlob.CreateIfNotExist(); Microsoft.WindowsAzure.StorageClient.StorageClientException was unhandled Message="One of the request inputs is out of range." Source="Microsoft.WindowsAzure.StorageClient" StackTrace: at Microsoft.WindowsAzure.StorageClient.Tasks.Task1.get_Result() at Microsoft.WindowsAzure.StorageClient.Tasks.Task1.ExecuteAndWait() at Microsoft.WindowsAzure.StorageClient.TaskImplHelper.ExecuteImplWithRetry[T](Func2 impl, RetryPolicy policy) at Microsoft.WindowsAzure.StorageClient.CloudBlobContainer.CreateIfNotExist(BlobRequestOptions options) at Microsoft.WindowsAzure.StorageClient.CloudBlobContainer.CreateIfNotExist() at WebRole1.BlobFun..ctor() in C:\Users\cloud\Documents\Visual Studio 2008\Projects\CloudBlob\WebRole1\BlobFun.cs:line 58 at WebRole1.BlobFun.calling1() in C:\Users\cloud\Documents\Visual Studio 2008\Projects\CloudBlob\WebRole1\BlobFun.cs:line 29 at AzureBlobTester.Program.Main(String[] args) in C:\Users\cloud\Documents\Visual Studio 2008\Projects\CloudBlob\AzureBlobTester\Program.cs:line 19 at System.AppDomain._nExecuteAssembly(Assembly assembly, String[] args) at System.AppDomain.ExecuteAssembly(String assemblyFile, Evidence assemblySecurity, String[] args) at Microsoft.VisualStudio.HostingProcess.HostProc.RunUsersAssembly() at System.Threading.ThreadHelper.ThreadStart_Context(Object state) at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state) at System.Threading.ThreadHelper.ThreadStart() InnerException: System.Net.WebException Message="The remote server returned an error: (400) Bad Request." Source="System" StackTrace: at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult) at Microsoft.WindowsAzure.StorageClient.EventHelper.ProcessWebResponse(WebRequest req, IAsyncResult asyncResult, EventHandler1 handler, Object sender) InnerException: Do you guys knw what is it that I am doing wrong ?

  Read the article

• Weird - "The EntityReference object could not be serialized" when serializing from an ASP.NET Web Si

  - by Mikey Cee

  I have an Entity Framework data model. Part of the model is a Customer entity. The web service provides a method to get a customer, and to receive an updated version of this customer to be persisted. To test this, I created a new ASP.NET web Application, (Solution Add New Project ASP.NET Web Application), then added a reference to my service reference using the standard Add Service Reference dialog. I then call the service using the following code: var client = new CustomerServiceClient(); var customer = client.GetCustomerByID(18); // get it customer.LimitDown = 100; // change it client.SaveCustomer(customer); // persist it Everything works as expected. Now, I do exactly the same thing, but this time with as ASP.NET Web Site (Solution Add New Web Site ASP.NET Web Site). I add the reference in a similar fashion and copy and paste the code above into the new site. But now I get the following exception thrown on the 4th line: System.InvalidOperationException The EntityReference object could not be serialized. This type of object cannot be serialized when the RelationshipManager belongs to an entity object that does not implement IEntityWithRelationships. Source Error: Line 2474: Line 2475: public SkyWalkerCustomerService.OperationResult SaveCustomer(SkyWalkerCustomerService.Customer customer) { Line 2476: return base.Channel.SaveCustomer(customer); Line 2477: } Line 2478: } Stack Trace: System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg) +9475203 System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type) +345 SkyWalkerCustomerService.ICustomerService.SaveCustomer(Customer customer) +0 SkyWalkerCustomerService.CustomerServiceClient.SaveCustomer(Customer customer) in c:\Windows\Microsoft.NET\Framework\v4.0.30128\Temporary ASP.NET Files\testsite2\dd2bcf8d\f95604ff\App_WebReferences.fz4h7x7l.0.cs:2476 _Default.Page_Load(Object sender, EventArgs e) in c:\Users\Mike\Documents\Repositories\UWC\SkyWalker\TestSite2\Default.aspx.cs:17 System.Web.Util.CalliHelper.EventArgFunctionCaller(IntPtr fp, Object o, Object t, EventArgs e) +14 System.Web.Util.CalliEventHandlerDelegateProxy.Callback(Object sender, EventArgs e) +35 System.Web.UI.Control.OnLoad(EventArgs e) +91 System.Web.UI.Control.LoadRecursive() +61 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1966 Googling for this error returns very little. Why doesn't this work?

  Read the article

• Avoid web.config inheritance in child web application using inheritInChildApplications

  - by Blankman

  I am trying to add <location inheritInChildApplications="false"> to my parent web application's web.config but it doesn't seem to be working. My parent's web.config has: <configuration> <configSections> </configSections> // 10 or so custom config sections like log4net, hibernate, <connectionStrings> </connectionStrings> <appSettings> </appSettings> <system.diagnostics> </system.diagnostics> <system.web> <webParts> </webParts> <membership> </membership> <compilation> </compilation> </system.web> <location ..> <system.web> </system.web> </location> <system.webServer> </system.webServer> My child web application is setup as an application in IIS, and is inheriting from the parent's web.config which is causing problems. Where exactly should I place the <location inheritInChildApplications="false"> so it ignores all the various web.config settings?

  Read the article

• ReflectionTypeLoadException with Silverlight serialization attributes

  - by RPS

  Hi all, I´m trying to inspect the types in a silverlight 4 assembly from a .NET 3.5 application. I have loaded the silverlight assembly with a Assembly.ReflectionOnlyLoadFrom sentence. contractsAssembly = Assembly.ReflectionOnlyLoadFrom(contractsAssemblyPath); When the .NET application tries to perform a call to GetTypes(), it throws a ReflectionTypeLoadException. Type[] types = contractsAssembly.GetTypes(); The LoaderExceptions property in the ReflectionTypeLoadException contains a list of exceptions, all of them regarding a problem loading a type that has serialization attributes. Type 'XXXX' in assembly 'YYYY' has method 'OnSerializing' with an incorrect signature for the serialization attribute that it is decorated with. The type XXXX has the following definitions in it: [System.Runtime.Serialization.OnSerializing] public void OnSerializing(System.Runtime.Serialization.StreamingContext context) [System.Runtime.Serialization.OnSerialized] public void OnSerialized(System.Runtime.Serialization.StreamingContext context) [System.Runtime.Serialization.OnDeserializing] public void OnDeserializing(System.Runtime.Serialization.StreamingContext context) [System.Runtime.Serialization.OnDeserialized] public void OnDeserialized(System.Runtime.Serialization.StreamingContext context) I have tried changing the method signature to internal or private, but with no luck. When I perform a GetTypes() call in a silverlight application that inspects this assembly I have no problems, so I thought that this was due to an incompatibility between .NET Framework and Silverlight. However, I see that .NET tools such as Reflector can inspect this Silverlight assembly, so there is a way to inspect Silverlight assemblies with serialization attributes from a .NET applciation. Could someone shed me some light on this? Many thanks in advance. Jose Antonio

  Read the article

< Previous Page | 296 297 298 299 300 301 302 303 304 305 306 307  | Next Page >