Search Results

Search found 10496 results on 420 pages for 'real yang'.

Page 301/420 | < Previous Page | 297 298 299 300 301 302 303 304 305 306 307 308  | Next Page >

• Warning for "Reallocated Event Count" S.M.A.R.T. attribute with a new/unused drive. How serious is t

  - by Developer Art

  I've just looked at the health status of my old 2,5 inch 500 Gb Fujitsu drive with a popular "HD Tune" utility. It shows a warning for the "Reallocated Event Count" property. How serious is that? The thing is that the drive is practically new. I pulled it out of a new laptop over a year ago and never used it since. Right now it only has 53 "Power On" hours which sounds about right since I only had it running a few evenings overnight before switching it for something more performant. Does this warning indicate that the drive is likely to fail some time in the future? I'm somewhat perplexed since the drive is effectively unused. What is more, I have arranged with somebody to buy off this drive since I don't really need. It is 12,5 mm thick (with 3 plates) meaning it doesn't fit into an external enclosure which makes it quite useless to me. Can I give away the drive without having it on my conscience or better cancel the deal? In other words, can the drive be used safely for years to come or better throw it away? I'm running a sector test now to see if there are any real problems. Will post the results as soon as they're available.

  Read the article

• Is there an high quality natural text reader for the mac?

  - by Another Registered User

  I'm reading about 150 pages of text on screen, every day. I will have to read about 15.000 in the next upcoming months. No joke. Well, the problem is this: I suffer from a sort of attention deficit hyperactivity disorder which forces me to read every sentence up to 10 times until I really get it. Mac OS X Snow Leopard has a built-in text reader with the name "Alex". Although it is already pretty good quality, I know there are far better natural sounding voices out there. I have heard already voices that are absolutely amazing compared to Alex. They're so good, that you can't tell anymore the difference between a real person or a computer. Alex still has this "metal factor" in its voice, which makes my ears hurt after 8 hours of listening. The next problem with Alex is, that he never makes a break after a sentence. Also, it's not possible to think about a sentence and then continue reading. It's also not possible to have him repeat a sentence, without tedious text selection and shortcut usage. Actually, the best tool I can imagine would have the option to read a sentence and move on to the next one after pressing a special key, OR repeating the previously one after pressing a special key. That would help so much! And if that's even with one of those bell lab / AT&T / whatever super-natural voices, even better! But it would be already a great relief if there was just a better tool to control Alex. To let him make breaks after sentences or let him speak big chunks of text sentence-by-sentence with fine-grained control over repetition and moving on. Is there anything?

  Read the article

• Setting kernel memory for installing postgresql

  - by Matthieu Taymans

  My question is about setting the kernel shared memory for installing postgresql on mac osx 10.6.8. In the readme file of postgresql it is said: Shared Memory PostgreSQL uses shared memory extensively for caching and inter-process communication. Unfortunately, the default configuration of Mac OS X does not allow suitable amounts of shared memory to be created to run the database server. Before running the installation, please ensure that your system is configured to allow the use of larger amounts of shared memory. Note that this does not 'reserve' any memory so it is safe to configure much higher values than you might initially need. You can do this by editting the file /etc/sysctl.conf - e.g. % sudo vi /etc/sysctl.conf On a MacBook Pro with 2GB of RAM, the author's sysctl.conf contains: kern.sysv.shmmax=1610612736 kern.sysv.shmall=393216 kern.sysv.shmmin=1 kern.sysv.shmmni=32 kern.sysv.shmseg=8 kern.maxprocperuid=512 kern.maxproc=2048 Note that (kern.sysv.shmall * 4096) should be greater than or equal to kern.sysv.shmmax. kern.sysv.shmmax must also be a multiple of 4096. Once you have edited (or created) the file, reboot before continuing with the installation. If you wish to check the settings currently being used by the kernel, you can use the sysctl utility: % sysctl -a The database server can now be installed. I'm a real beginner with all this but need to instal postgresql for academic purposes do you know how i can set this kernel shared memory. Won't that be harmful for my system? Thank you in advance. Matthieu

  Read the article

• windows 7: Event 55 The file system structure on the disk is corrupt and unusable

  - by Radio

  Here is a real bad one! Windows 7 RTM with SP1 installed [Version 6.1.7601]. Recently tried to delete some folder on my hard drive and Windows prompted "Error 0x80070570: The file or directory is corrupted and unreadable", and at the same time placed an Event 55 describing "The file system structure on the disk is corrupt and unusable. Please run the chkdsk utility on \Device\HarddiskVolume2." Ran chkdsk, first with /f option, then with /r option. Result in both cases was: no errors found, 0 bad sectors. No problems chkdsk found at all! Went through StackExchange, Google and spent over 6 hours on this. Still cannot figure out the problem. Re-installing/Re-Formatting is not an option! What did I try: Hotfix - Windows6.1-KB982927-x64.msu - gave me an error about incompatibility with my computer, however it totally matches my system. CRC of hotfix was ok. Windows Repair Console found startup errors and fixed those, but this didn't help an issue, even by running chkdsk c: /R from it. http://support.microsoft.com/kb/246026 does not promise anything good. sfc /scannow does not help too. Replaced hard drive by cloning an old one using True Image, repeated all steps above. At the same time, some minor glitches started to appear in my Windows, like side panel and notification area settings are getting reset. Goal is to delete the folder and get rid of Event 55. Sounds like NTFS bug. Please help. This is completely ridiculous.

  Read the article

• Change Windows Authentication user for Sql Server Management Studio

  - by Asmor

  We're using Sql Server 2005 with Windows Authentication setup. So normally, when you log in using e.g. Sql Server Management Studio, it forces you to log in at MACHINE_NAME\Username. Anyways, on this one particular computer, the person said they had to make a new account called User01 to do something and showed me where she'd created it under security in the "master" system database. And so now when she logs in, it's listed as MACHINE_NAME\User01 (not the actual Windows user name). It's still set to Windows Authentication, though, and I'm unable to change the login name. Now here's where the real problem comes in... I didn't realize that she was being logged in under this user name at the time, and I disabled it to see what would happen. Now I can't log into the server under her account. I created a new account in Windows called test, and as expected SSMS had the username as MACHINE_NAME\test, and I was able to log in fine. However, the area where the User01 account was listed is not visible to me as far as I can tell and so I can't reenable it. I also tried running the following query: alter login User01 ENABLE And got this error: Msg 15151, Level 16, State 1, Line 1 Cannot alter the login 'User01', because it does not exist or you do not have permission. So in a nutshell, ideally I'd like to reenable User01 somehow, just to get things back to where they used to be. Failing that, how can I force SSMS to log in using the Windows account name as it should be, rather than trying to use User01?

  Read the article

• Can I disable this Windows (XP) Security Warning?

  - by FumbleFingers

  I recently reformatted my hard drive and reinstalled Windows XP (I know I'll have to take the plunge and commit to Win8 "real soon, now", but I'm just not quite ready for the upheaval yet! :) I used to use WinRar (and later, when I got fed up with the "nag" messages, 7-Zip), but I haven't installed either of them in my new configuration, so I must be using the built-in XP facility when I open *.zip files. For years, I've been opening downloaded *.zip archives, and using "drag & drop" to copy to a File Explorer window open on the folder where I want the files to end up (usually, My Documents\Downloads). But now I find that when I "drop" the file(s), I get a pop-up Windows Security Warning saying Are you sure you want to copy or move files to this folder? You should only move or copy files from locations that you trust Can anyone explain why I'm getting this message, and is there any (reasonably easy, please! :) way to suppress it? Since I've already put the *.zip file on my computer, it seems a bit late to ask if I trust it. (Thus far, the files in question have always been plain text, so it's not a matter of dodgy programs, etc.) Apologies for the low quality image - I don't have the appropriate tools or knowledge to do any better, and it doesn't help that my "PrtScr" screen capture has included what would have been on my second monitor (TV) if it had been turned on. If you can't read it, trust me - I have copied the text verbatim.

  Read the article

• How to move the Windows 7 bootloader to the Windows 7 partition?

  - by pauldoo

  I recently installed Windows 7 in a triple boot setup alongside XP and Linux. When I was finished and was in the process of restoring the bootloader for Linux I discovered something strange about what Windows 7 had done. I discovered that Windows 7 had not installed a bootloader to it's own partition, and instead had instead set up a bootloader on the pre-existing XP partition that offers a choice between 7 and XP. This behaviour has been noticed by others. Now my booting is slightly odd. I have GRUB on the MBR which lets me choose between Linux and Windows. When I select Windows I have Grub boot to the XP partition where I get the 2nd choice between 7 and XP. Why doesn't the Windows 7 installer put the Windows 7 bootloader on the Windows 7 partition like all previous MS OSs? This is now going to be a real problem for me, as I now want to wipe the XP partition and install something else there (probably another non-MS OS). How can I move the bootloader for Windows 7 onto the Windows 7 partition, thus making it bootable and allowing me to safely wipe the XP partition?

  Read the article

• Apache web logs "GET http/1.1" 200 error?

  - by songdogtech

  I've got some puzzling (at least to me) errors that show up in my webserver logs. What's puzzling is that they show my error page being referenced, but that error page doesn't show up as being displayed in hits on statcounter.com. Can someone tell me the difference in these two kinds of errors? Or is only one a "real" error? This is in WordPress, and I have my 404.php file in my theme redirecting to a static Wordpress page at mydomain.com/error/ These first two log entries show /error/, but a "hit" on my /error/ page doesn't show in my webstats. The page referenced - /2009/08/delete-preference-files/ - exists, and shows a "hit" at statcounter. 92.17.232.242 - - [13/Mar/2010:01:45:43 -0800] "GET /error/ HTTP/1.1" 200 4012 "http://markratledge.com/2009/08/delete-preference-files/" "Mozilla/5.0 (Windows;U; Windows NT 5.1; en-US; rv:1.9.1.8) Gecko/20100202 Firefox/3.5.8 (.NET CLR 3.5.30729)" 732 4432 92.17.232.242 - - [13/Mar/2010:01:47:11 -0800] "GET /error/ HTTP/1.1" 200 4012 "http://markratledge.com/wp-content/themes/default/style.css" "Mozilla/5.0(Windows; U; Windows NT 5.1; en-US; rv:1.9.1.8) Gecko/20100202 Firefox/3.5.8 (.NET CLR 3.5.30729)" 861 4432 These are two error entries that display my /error/ page, because /error/ gets a "hit" in statcounter. The page /cookies/ doesn't exist. 72.174.16.202 - - [13/Mar/2010:10:53:37 -0800] "GET /cookies HTTP/1.1" 302 21 "-" "Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2) Gecko/20100115 Firefox/3.6 (.NET CLR 3.5.30729)" 394 642 72.174.16.202 - - [13/Mar/2010:10:53:38 -0800] "GET /error/ HTTP/1.1" 200 4012 "-" "Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2) Gecko/20100115 Firefox/3.6 (.NET CLR 3.5.30729)" 393 4432

  Read the article

• How to edit known_hosts when several hosts share the same IP and DNS name?

  - by Frédéric Grosshans

  I regularly ssh into a computer which is a dual-boot OS X / Linux computer. The two OS instance do not share the same host key, so they can be seen as two host sharing the same IP and DNS. Let's say the IP is 192.168.0.9, and the names are hostname and hostname.domainname As far as I understood, the solution to be able to connect to the two host is to add them both to the ~/.ssh/know_hosts file. However, it is easier said than done, because the file is hashed, and has probably several entries per host (192.168.0.9, hostname, hostname.domainname). As a consequence, I have the following warning Warning: the ECDSA host key for 'hostname' differs from the key for the IP address '192.168.0.9' Is there an easy way to edit the known_hosts file, while keeping the hashes. For example, how can I find the lines corresponding to a given hostame? How can I generate the hashes for some known hosts? The ideal solution would allow me to connect to seamlessly to this computer with ssh, no matter whether I call it 192.168.0.9, hostname or hostname.domainname, nor if it uses its Linux hostkey or its OSX hostkey. However, I still want to receive a warning if there is a real man-in-the middle attack, i.e. if another key than these two is used.

  Read the article

• Recording screen-casts on another computer

  - by paleozogt

  We're trying to record the desktops of users using demo versions of our software (this is an in-house lab setup). We need to have the recording happen on a separate computer (just across the room), so that the recording software doesn't interfere with the user. Every screen recording software I've seen will only record what's happening on the computer its installed on; ie, you can't record what's happening on another computer. So it seems I need to cobble together a solution (unless anyone knows of software that will do this). Getting the video to the other computer seems easy enough. I'm using TightVNC with the DFMirage driver on the test computer. The recording computer connects to the test computer with TightVNC and then uses CamStudio to record what's happening. The real problem is how to deal with the audio. We need to record both what the user is saying (through a headset mic) as well as the sounds produced by the test computer. But VNC doesn't transmit audio. :( I'm not sure how to get both audio streams (mic and sounds) over to the recording computer. Any ideas?

  Read the article

• What are some techniques to monitor multiple instances of a piece of software?

  - by Geo Ego

  It was recommended that I ask this question here by a member of StackOverflow. I have a piece of self-serve kiosk software that will be running at multiple sites. I'd like to monitor their status remotely. The kiosk application itself is pretty much finished. I am now in the process of creating a piece of software that will monitor all of the kiosks from a central location so that the customer can view particular details remotely (for instance, how many bills are in the acceptor's cash cartridge, what customer is currently logged in, etc.). Because I am in such an early stage of development, my options are quite open. I understand that I'm not giving very many qualifications, but I'd like to try to get a good variety of potential solutions. Some details: Kiosk software is a VB6 app running on Windows Embedded Monitoring software will be run on a modern desktop version of Windows (either XP, Vista, or 7) Database is SQL Server 2008 My initial idea was to develop a .NET app that would simply report the last database transaction for each kiosk at a set interval (say every second or so) but I'd really like for the kiosk software to report its status in real-time. I'm not exactly sure where to begin in terms of what modifications may need to be made to the kiosk software, and what the monitoring software will require. Links to articles on these topics would be most welcome.

  Read the article

• CPU / Affinity mask problem in SQL 2005

  - by Robert Moir

  Hi folks, Having a problem with a SQL Server which was virtualised. The CPU mask was set on the physical host for some reason and now advanced options are not available. So I need to reconfigure the CPU affinity mask settings - which are advanced options, so this is blocked because of the affinity mask issue. I've tried doing this from the SQL server in single user command line mode, I've googled and found lots of people with similar problems but no real solution. I'm stumped. Any ideas? Sample commands and output from query analyser below. sp_configure 'show advanced options', 1 GO RECONFIGURE WITH OVERRIDE GO sp_configure 'affinity mask', 0x00000000 GO RECONFIGURE GO ----------------------------------------- Configuration option 'show advanced options' changed from 0 to 1. Run the RECONFIGURE statement to install. Msg 5832, Level 16, State 1, Line 1 The affinity mask specified does not match the CPU mask on this system. Msg 15123, Level 16, State 1, Procedure sp_configure, Line 51 The configuration option 'affinity mask' does not exist, or it may be an advanced option.

  Read the article

• Mac OS X Lion Apache Server not Found

  - by Burak Erdem

  After upgrading to Lion 10.7.2 today, Apache virtual hosts are not working anymore. When I go to http://XYZ.localhost, it say "server not found". I am using Apache on my Mac OS X Lion and until today, it was working fine. I can access http://localhost but I can't access http://XYZ.localhost My /etc/hosts file is like below; 127.0.0.1 XYZ.localhost My /etc/apache2/extra/httpd-vhosts.conf file is like below; <VirtualHost *:80> ServerName XYZ.localhost DocumentRoot /Library/WebServer/Documents/XYZ <Directory /Library/WebServer/Documents/XYZ> DirectoryIndex index.php AllowOverride All Order allow,deny Allow from all </Directory> </VirtualHost> I think I once had this problem too, after another OS X update, but I can't remember how I solved it. Is it a user permission issue? Or is there something wrong with Apache or any other setting? EDIT: It seems like my /etc/hosts file is not working correctly. Even if I add something like 127.0.0.1 apple.com it still goes to the real apple.com. Maybe this might help to solve the problem.

  Read the article

• Dynamic subdomain routing

  - by Nader

  Hi everyone, I asked this question over at stackoverflow, but got very few views: http://stackoverflow.com/questions/2284917/route-web-requests-to-different-servers-based-on-subdomain Perhaps it's more applicable to this crowd. Here it is again for convenience: I have a platform where a user can create a new website using a subdomain. There will be thousands of these, eg abc.mydomain.com, def.mydomain.com . Hopefully if we are successful hundreds of thousands. I need to be able to route these domains to a different IPs to point at a particular app server. I have this mapping in a database right now. What are the best practices and recommended technologies here? I see a couple options: Have DNS setup with a wildcard CNAME entry so that all requests go to a single IP where perhaps two machines using heartbeat (for failover) know how to look up the IP in the database and then do an http redirect to the appropriate app server. This seems clunky and slow to me. Run my own DNS server that can be programatically managed such that when a new site is created a DNS entry is added. We also move sites around to different app servers, so I would need to be able to update DNS entries in close to real time. Thoughts anyone? Thanks. Update2: I've setup external wildcard DNS pointing at an HAProxy web server whose job it is to route requests to backend servers. The mapping is stored in our internal PowerDNS server. Question now is how to get the HAProxy server (or another) to use the value of the internal DNS and not some config file or access list? – Update: Based on some suggestions below, it seems like reverse-proxy server(s) is the way to go. As I'll be rebalancing the domain-server mapping, these need to work instantly and the TTL on a DNS solution could be a problem. Any recommendations on software to use considering this domain-IP data is stored in a DB, and I'll need this to be performant?

  Read the article

• Are there cloud network drives that let users lock files or mark them as "in use"?

  - by Brandon Craig Rhodes

  Having spent several hours reading about the features and limitations of services like DropBox and Jungle Disk and the hundreds of competitors they seem to have (as though everyone with an AWS account these days goes ahead and writes a file sharing application just for fun), I have yet to find one that would let a team of people at a small business collaborate without stepping all over each other's toes. At a small business there are often many small documents per project — estimates, contracts, project plans, budgets — and team members frequently have to open and edit them, with all sorts of problems happening if two people edit a file at once. Even if a sharing service is smart enough to keep both versions of the file created, most small-business software (like word processors, spreadsheets, estimating software, or billing systems) has no way to compare — much less to merge! — the changes in two rival versions of a file that two people edited at the same time without each other's knowledge. So, my question: are their cloud-based file sharing solutions that not only provide a virtual network drive that people can access, but that also let users lock files — even if it's not a real lock but just a flag or indicator — that could possibly prevent remote workers from both editing the same file at once? Having one person wait for another person to finish editing is a very, very small inconvenience compared to the hour or more than it can take to compare two estimates by hand until you find and resolve the rival changes. Given this fact, I am surprised that almost none of the popular file sharing solutions seem to recognize this problem and provide some solution! Does anyone know of a service that does?

  Read the article

• Java web app deployment and ControlTier adoption

  - by Ran

  I've been searching for a configuration and deployment manager tool for my java-linux based web service and have been looking mainly at ControlTier (http://controltier.org). We operate at a medium scale (100's of hosts, multi-DC, dozens of services). There seem to be be plenty of lower level system admin tools such as chef, puppet, cfengine, bcfg2 and more and my understanding and the reason I'm calling them "low level" is that they are great for system level administration tasks such as setting up a mount, file permissions, users etc but aren't designed, for example for java deployments, which usually come with a build process and special java semantics. In many cases any tool can be used to do anything but if it was not designed for the task it can get uncomfortable. OTOH control-tier seem to have been designed just for that - java application deployments, at least that's what all the tutorials on their site demonstrate but here's the problem - The wiki at http://controltier.org/wiki/ is pretty good and stuffed with examples and the company behind the open source CT product is very responsive (pushy...) however, I'm yet to have seen any material from 3rd party users on the net. No success stories, no detailed blog posts, no best practices, no cheat sheets, not even hate letters, nothing. This plays badly for DTO solutions, CT's sponsor for two reasons, one is that it makes me suspicious what's the reason for the poor adoption? and second, what do I do if I get stuck and there's no help page on CT's wiki page and the mailing list is too slow to answer. I'm stuck with a "free" product that a consultancy company is pushing. So my question here - I'd be interested in hearing if anyone has had real world experience with CT for java based web app deployments and if he'd thumb up the product? Any other comments that may enlighten me are welcome of course...

  Read the article

• Using Varnish (only) for DDoS mitigation

  - by Martin Kanters

  My VPS is suffering from a (D)DoS doing a SYN flood with spoofed IPs. I'm right now searching from ways how to be able to defend (at least a bit) against it. It's running a DirectAdmin apache2 webserver. Mainly used for serving PHP and MySQL. We are using CloudFlare, which are saying that they are able to mitigate (D)DoS at some level, now the attacker knows our real IP address, so CloudFlare isn't helping a bit. I've done some searching on the net and found out about enabling SYN cookies, to defend against it. I've checked my settings and it seems it was enabled all along. I've also read about that Varnish is able to defend against SYN flooding and Slowloris attacks, now I'm pretty interested in using that. The thing is that CloudFlare is already caching a lot from us, and I don't wish to spend too much resources on Varnish. Is it possible and smart to set up Varnish only for the better handling of requests? Are there perhaps better ways which I've missed? Thanks in advance, Martin

  Read the article

• Haproxy and CNAME

  - by user123354

  I want to create a simple load balancer for the two servers. The problem is with CNAME records, I think. Let's say I have two the same applications on AppFog.com. app1.aws.af.cm and app2.aws.af.cm Here is my haproxy.cfg file: global maxconn 2000 daemon defaults mode http clitimeout 60000 srvtimeout 30000 contimeout 4000 option httpclose listen http_proxy bind [myip]:80 mode http stats enable stats auth user:passwd stats uri /stats balance source option httpchk option forwardfor server host01 app1.aws.af.cm:80 maxconn 300 check server host02 app2.aws.af.cm:80 maxconn 300 check But this only resolving IP for domain app1.aws.af.cm and app2.aws.af.cm, which obviously doesn't work if I open this IP in web browser. The problem is that AppFog doesn't have public IP for application (same as OpenShift). How to do that Haproxy to perform a proper connection between Load Balancer and this two servers? Example: This is real app - http://freechat.eu01.aws.af.cm Haproxy only resolves IP for this domain which is 46.51.204.8:80 Of course this IP will not show my application, only an error page. Sorry for my poor English.

  Read the article

• How to run a website domain without redirecting if IP is already used for another website? [duplicate]

  - by SSpoke

  This question already has an answer here: Hosting multiple distinct folders for distinct domains 1 answer I bought a VPS Host that gave me only 1 IP Address which I used on my first domain name and it works without any problems. Now my second domain name I can't use the same ip address as it points to the first domain name. So I figured my only option was to use a GoDaddy hosted iframe redirection which redirects to a sub folder on my first domain which worked so far. Now I'm trying to load paypal from <?php headers() ?> and I get a permission error because of that iframe Refused to display 'https://www.paypal.com/cgi-bin/webscr?notify_url=&cmd=_cart&upload=1&business=removed&address_override=1' in a frame because it set 'X-Frame-Options' to 'SAMEORIGIN'. How do I avoid the Iframe solution for my second domain while not messing up my first domain? Somebody I forgot once told me it doesn't matter if you have 1 IP Address you could host multiple websites on it? how it that possible the DNS doesn't seem to work off ports afaik, yes I could host multiple websites on different folders but that's not what I call hosting a real website it has to be pointed by a domain name, so this iframe issue doesn't happen My server configuration is httpd (apache) that comes with CentOS 6 (Linux) operating system

  Read the article

• Enabling hardware acceleration and Xinerama for multi-monitor/multi-GPU in Linux

  - by mynameiscoffey

  My current setup is three monitors connected as follows (monitors listed from left to right): GPU0 (nVidia GTX 280): - Dell 2405FPW (1920x1200) - Dell U2410 (1920x1200) GPU1 (nVidia 210): - Dell 2405FPW (1920x1200) Works like a charm in Windows 7, not so much in Linux. I seem to only have three real options: Run all three monitors as a seperate X screen, I get hardware acceleration but as they are all independent X sessions I cannot move windows between them and can only have firefox open on one at any given time. Run the two on GPU0 in TwinView mode and have GPU1 as a seperate X screen. Same limitation as 1 but at least two monitors work together ok. I did have an issue where occasionally Linux saw both monitors on GPU0 as a single large monitor however. Enable Xinerama and have everything work as I want it to but hardware acceleration is gone and the display is Windows 95 style choppy. My ideal solution would be to have all screens working as they do under Xinerama without the limitation of having hardware acceleration disabled. I don't even care if that means rendering all three on GPU0 and somehow farming out the display of the third monitor to GPU1, whatever works. My question is this: is there any way to accomplish this? I don't feel like my use case is so out there that there shouldn't be at least some form of support (beyond the three limited options presented above), or is my best option going to be to just suck it up and pick up a better card to replace both that can handle three outputs by itself?

  Read the article

• Cannot establish XMPP server-to-server connection to gmail

  - by v_2e

  My jabber-server fails to connect to gmail.com giving the error: outgoing s2s stream myserver.com.ua-bot.talk.google.com closed: undefined-condition (myserver.com.ua is a Google Apps Domain with Talk service enabled.) I am using the Prosody XMPP server. It works just fine with other jabber-servers I tested so far (e.g. jabber.ru). However, when some of my clients tries to add a gmail contact to his contact-list, the subscription request lasts forever, and the Prosody gives the following sequence of messages in its log: Oct 21 22:57:16 s2sout95897f8 info Beginning new connection attempt to gmail.com ([173.194.70.125]:5269) Oct 21 22:57:16 s2sout95897f8 info sent dialback key on outgoing s2s stream Oct 21 22:57:16 s2sout95897f8 info Session closed by remote with error: undefined-condition (myserver.com.ua is a Google Apps Domain with Talk service enabled.) Oct 21 22:57:16 s2sout95897f8 info outgoing s2s stream myserver.com.ua->gmail.com closed: undefined-condition (myserver.com.ua is a Google Apps Domain with Talk service enabled.) Oct 21 22:57:16 s2sout95897f8 info sending error replies for 2 queued stanzas because of failed outgoing connection to gmail.com Here for the domain name of my server I use myserver.com.ua I found a similar problem described in this thread, but there is no detailed description of the solution there. As for the Google services, I did have a google account where I added the domain name under question to the Webmasters tools page. However, I deleted my account long ago, so now it is unclear, how any of the Google services can relate to my domain name. So my question is: What is the real cause of this problem (my jabber-server configuration or imaginary Google account or something else) and how can I make my Prosody server connect to gmail.com jabber service?

  Read the article

• Looking for comprehensive computer monitoring software

  - by cornjuliox

  Summer in this country is insanely hot. So hot in fact, that I think we just lost a machine due to overheating (last recorded CPU/GPU temp was close to 100 C, now it wont start and lets out a long series of short beeps on power up), but that's not my concern here. Since heat is such a problem for me, I use several different pieces of software to monitor temperatures in my machine. I use MSI Afterburner to monitor GPU temp, control GPU fan speed and for some light overclocking, and then I use Speccy and SpeedFan to monitor the rest of the system, CPU temp and everything. The setup works fine for now, but I want to consolidate all this into one program so I'm not juggling several windows at once. Is there any program out there that will let me monitor the following from a single window: CPU Temp and Fan Speed CPU clock GPU Temp and Fan Speed GPU clock, both core and memory Additionally, mobo temp (Speccy lists both CPU and Motherboard temp, I assume that the latter is referring to North and Southbridge temperatures. I'm also looking for the ability to chart these data points on a graph over time, basically to see just how high the temperatures spike under load and for general analysis. It'd be nice if it could handle overclocking of both CPU and GPU in real time too. Any suggestions? Edit: I forgot to mention that I'm on Windows 7, 64-bit

  Read the article

• Fail2Ban adds iptable rules but they are not working?

  - by EApubs

  Fail2Ban just blocked my IP for 3 SSH attempts. It added the iptables rule and I can see it using the "sudo iptables -L -n" command. But I can still access the site and login through SSH! What might be the problem? Is it because im using CloudFlare? I have set Nginx to write the real IPs to the access logs instead of the Cloud Flare IP. Isn't it enough? Chain fail2ban-ssh (1 references) target prot opt source destination DROP all -- 119.235.14.8 0.0.0.0/0 RETURN all -- 0.0.0.0/0 0.0.0.0/0 The input chain : Chain INPUT (policy DROP) target prot opt source destination fail2ban-NoAuthFailures tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 fail2ban-nginx-dos tcp -- 0.0.0.0/0 0.0.0.0/0 multiport dports 80,8090 fail2ban-postfix tcp -- 0.0.0.0/0 0.0.0.0/0 multiport dports 25,465 fail2ban-ssh-ddos tcp -- 0.0.0.0/0 0.0.0.0/0 multiport dports 22 fail2ban-ssh tcp -- 0.0.0.0/0 0.0.0.0/0 multiport dports 22 ufw-before-logging-input all -- 0.0.0.0/0 0.0.0.0/0 ufw-before-input all -- 0.0.0.0/0 0.0.0.0/0 ufw-after-input all -- 0.0.0.0/0 0.0.0.0/0 ufw-after-logging-input all -- 0.0.0.0/0 0.0.0.0/0 ufw-reject-input all -- 0.0.0.0/0 0.0.0.0/0 ufw-track-input all -- 0.0.0.0/0 0.0.0.0/0 LOG all -- 0.0.0.0/0 0.0.0.0/0 LOG flags 0 level 4

  Read the article

• Upgrade an Ubuntu 8.04 installation with VMware Server 1.0.8 and lots of guest OSes to Something Els

  - by Glyph

  I have an Ubuntu 8.04 (Hardy Heron) host machine which is running a whole slew of virtual machines in VMWare Server 1.0.8. Among other guest OSes, there is every release version of Ubuntu since 6.06, OpenSolaris 2009.06, and Windows XP. Right now I access these VMs from a variety of client OSes as well; Linux and Windows via the VMWare server console, and MacOS via X-forwarding the host machine's server console. I'd like to upgrade the host to Ubuntu 10.04 (Lucid Lynx), but from what I can tell, getting VMWare Server 1.x to work on a more recent version of Linux is a real pain. While VMware Server 2.x is a bit easier, it's still not packaged as Debian packages, so installing security updates is a big chore. As long as I'm upgrading anyway, I'd like to move to a virtualization solution that will allow me to automate applying updates. The options that I'm aware of right now are KVM (managed via virt-manager) and VirtualBox (as managed by its own tools or via its own libvirt bindings), but I'm open to other suggestions. For each option, I'd like to know how do I convert my guest images to the new format? am I going to have to re-activate my Windows guests (alternatively, "If the virtual hardware is different by default, can I avoid re-activation by changing some virtualization configuration to provide me with more similar virtual hardware") what are the management options like for each client OS (mac, linux, windows)? Thanks.

  Read the article

• 550 Requested action not taken: mailbox unavailable

  - by Porch

  I setup a small box with Server 2003 64bit to be used as a webserver and email server for a small school. Real simple stuff for a few users. A simple website and a handful of emails. rDNS and spf records setup and pass every test I found including test at dnsstuff.com. Email sending to almost every email address (google, hotmail, aol, whatever) works. However, with one domain, I get an bounce back with the error. 550 Requested action not taken: mailbox unavailable It's another school running Exchange judging from some packet sniffing with WireShark. Every email on this domain I have tried sending to gives this error. The email address is valid as I can send to it from my personal, and gmail account without a problem. Does anyone know of some anti-spam software that gives an 550 error like the above? What else could this be? Thanks for any suggestions. Packet capture of the two servers communicating look like this. 220 <server snip> Microsoft ESMTP MAIL Service, Version: 6.0.3790.3959 ready at Sat, 2 Oct 2010 12:48:17 -0700 EHLO <email snip> 250-<server snip> Hello [<ip snip>] 250-TURN 250-SIZE 250-ETRN 250-XXXXXXXXXX 250-DSN 250-ENHANCEDSTATUSCODES 250-8bitmime 250-BINARYMIME 250-XXXXXXXX 250-VRFY 250-X-EXPS GSSAPI NTLM LOGIN 250-X-EXPS=LOGIN 250-AUTH GSSAPI NTLM LOGIN 250-AUTH=LOGIN 250-X-LINK2STATE 250-XXXXXXX 250 OK MAIL FROM: <email snip> 250 2.1.0 <email snip>....Sender OK RCPT TO:<email snip> 250 2.1.5 <email snip> DATA 354 Start mail input; end with <CRLF>.<CRLF> <email body here> . 550 Requested action not taken: mailbox unavailable QUIT 221 Goodbye

  Read the article

< Previous Page | 297 298 299 300 301 302 303 304 305 306 307 308  | Next Page >