Search Results

Search found 10751 results on 431 pages for 'fast forward'.

Page 303/431 | < Previous Page | 299 300 301 302 303 304 305 306 307 308 309 310  | Next Page >

• Server 2008 RAID5 resynching

  - by benpage

  I built a W2K8 R2 server last weekend, and built a R5 array using Disk Management, 5x 1TB drives. For the next 60 hours the status said 'Resynching (X%)' as it built the array. during this time i did read and write to the drive (slowly) and once the rebuild was complete speeds were quite fast. I was copying over some data from a USB hard drive overnight, and the machine crashed (looking in the error i believe it was the driver for the usb drive) and so the RAID5 went back to resynching, since the machine was not shut down properly. The issue is, it's been about 48 hours since that started and I'm happy to say it will take roughly 60 hours again to resynch, however.. all this time in Disk Management, the status has only said 'Resynching', not 'Resynching (X%)'. The hard drive light is going nuts, and read/writes are slow again, so I'm assuming it is actually resynching. The question is - is that a correct assumption? and why is disk management not telling me what %age it's done? Is this normal behaviour for a not-properly-shut-down r5 array?

  Read the article

• How to compare old laptop to new laptop?

  - by Lasse V. Karlsen

  I hope this question doesn't get closed at once :) I have an old laptop, a Compaq NC4200, which is going its final laps around the track these days. Battery is dead, and everything kinda runs slow. It also has only 1GB of memory, and even though I don't know if it can take more, I probably wouldn't be able to get hold of any that matches without having to special order it. The size, however, has been ideal for my usage pattern, so I'm looking to replace it with a similarly sized laptop, at least in the same size category. However, it's been a while since I tried keeping track of CPUs, so I have a question. The old laptop has a Intel Pentium M 760 1.86GHz processor. One laptop I found online has a Intel Pentium SU4100 1.3GHz dual-core. This type of processor seems to be quite common in the price and size-range I've been looking. What kind of relative performance boost could I expect from the old one to the new one? I am not expecting a "about 7.45x speed", but some indication would be nice. For instance, dual-core tells me it might be akin to 2.6GHz, but I assume I can't simply compare 1.86GHz to 2.6GHz and expect the new one to run about 1.4x as fast, I expect more these days. Or is that unrealistic for this kind of processor? Do I need to up my price range and go for a 2+ GHz processor?

  Read the article

• bonding module parameters are not shown in /sys/module/bonding/parameters/

  - by c4f4t0r

  I have a server with Suse 11 sp1 kernel 2.6.32.54-0.3-default, with modinfo bonding i see all parameters, but under /sys/module/bonding/parameters/ not modinfo bonding | grep ^parm parm: max_bonds:Max number of bonded devices (int) parm: num_grat_arp:Number of gratuitous ARP packets to send on failover event (int) parm: num_unsol_na:Number of unsolicited IPv6 Neighbor Advertisements packets to send on failover event (int) parm: miimon:Link check interval in milliseconds (int) parm: updelay:Delay before considering link up, in milliseconds (int) parm: downdelay:Delay before considering link down, in milliseconds (int) parm: use_carrier:Use netif_carrier_ok (vs MII ioctls) in miimon; 0 for off, 1 for on (default) (int) parm: mode:Mode of operation : 0 for balance-rr, 1 for active-backup, 2 for balance-xor, 3 for broadcast, 4 for 802.3ad, 5 for balance-tlb, 6 for balance-alb (charp) parm: primary:Primary network device to use (charp) parm: lacp_rate:LACPDU tx rate to request from 802.3ad partner (slow/fast) (charp) parm: ad_select:803.ad aggregation selection logic: stable (0, default), bandwidth (1), count (2) (charp) parm: xmit_hash_policy:XOR hashing method: 0 for layer 2 (default), 1 for layer 3+4 (charp) parm: arp_interval:arp interval in milliseconds (int) parm: arp_ip_target:arp targets in n.n.n.n form (array of charp) parm: arp_validate:validate src/dst of ARP probes: none (default), active, backup or all (charp) parm: fail_over_mac:For active-backup, do not set all slaves to the same MAC. none (default), active or follow (charp) in /sys/module/bonding/parameters ls -l /sys/module/bonding/parameters/ total 0 -rw-r--r-- 1 root root 4096 2013-10-17 11:22 num_grat_arp -rw-r--r-- 1 root root 4096 2013-10-17 11:22 num_unsol_na I found some of this parameters under /sys/class/net/bond0/bonding/, but when i try to change one i got the following error echo layer2+3 > /sys/class/net/bond0/bonding/xmit_hash_policy -bash: echo: write error: Operation not permitted

  Read the article

• Help configuring Mercury mail or similiar with XAMPP to send e-mail outside of localhost

  - by user291040

  I'm building a PHP/MySQL driven website for my department at work (installed via XAMPP). I need to be able to send mail to outside e-mail addresses (e.g., Yahoo, Hotmail, etc.) using the PHP mail() function. As I see it I have to solutions: Configure the SMTP directive in php.ini to the server running at my work. Configure/run a mail server that can send e-mails outside of localhost (I'm trying Mercury because it comes installed with XAMPP). Here are problems I've come up against: I took a guess at our SMTP server name, and when calling PHP mail(), I get the error SMTP server response: 530 5.7.1 Client was not authenticated I can't be sure, however, the SMTP name is correct (I can't get help from our IT guys because of politics). I have tried to use mercury mail. Mercury seems to be picking up the request, but it doesn't want to forward the e-mail to the outside. I keep getting a Temporary error 240 (temporary MX resolution error). I've searched high and low but still can't find a definitive answer on how to send e-mails outside of localhost. Any help is greatly appreciated.

  Read the article

• Getting SMB file shares working over a PPTP VPN

  - by Ben Scott

  I'm having issues getting SMB file shares working over a PPTP VPN. The server setup consists of a security device (DrayTek V3300) which passes the PPTP authentication to a SBS2003 server running RRAS. The server is the DC and provides DNS and WINS, the single NIC's name server is set to the NIC's IP (192.168...), and DHCP on the DrayTek sets the server IP as the DNS. If I create a new VPN connection in Win7, leaving everything as default apart from the server, username, password and domain, I can: ping everything by IP address resolve IPs with nslookup using their fully-qualified name, as in nslookup fileserver.mydomain.local ping machines by fully-qualified name, as in ping fileserver.mydomain.local However if I try to access a file share: within Explorer, I get "Windows cannot access ..." with "Error code: 0x80004005 Unspecified Error", using net use z: \\fileserver.mydomain.local\share, I get "System error 53 has occurred. The network path was not found." If I add the machine name to my HOSTS file I can use the file share, which is my last-ditch workaround, but I have a number of VPN users and would rather a solution that doesn't involve me trying to hand-edit system files on computers half a country away. If I set the WINS server explicitly in the connection's IPv4 settings I don't have to use the FQN to ping the machine, but that doesn't change anything else. EDIT: The PC I'm having the issue on is running Win 7 Home Premium. After more testing I actually have two other PCs that work, one W7HP, one XP Home, and another Vista PC that doesn't work (not tested as much as the others), all four on the same internet connection (behind the same router). All of them were tested with a straight-forward, all defaults, new VPN configuration.

  Read the article

• Drop outs when accessing share by DFS name.

  - by Stephen Woolhead

  I have a strange problem, aren't they all! I have a DFS root \domain\files\vms, it has a single target on a different server than the namespace. I can copy a test file set from the target directly via \server\vms$\testfiles and all is well, the files copy fine. I have repeated these tests many times. If I try and copy the files from the dfs root I get big pauses in the network traffic, about 50 seconds every couple of minutes, all the traffic just stops for the copy. If I start another copy between the same two machines during this pause, it starts copying fine, so I know it's not an issue with the disks on the server. Every once in a while the copy will fail, no errors, the progress bar will just zip all the way to 100% and the copy dialog will close. Checking the target folder show that the copy is incomplete. I've moved the LUN to another server and had the same problem. The servers are all 2008 R2, the clients are Vista x64, Windows7 x64 and 2008 R2, all have the same problem. Anyone got any ideas? Cheers, Stephen More Information: I've been running a NetMon trace on the connection when the file copy fails and what seems to be standing out is that when opening a file that the copy completes on the SMB command looks like this: SMB2: C CREATE (0x5), Name=Training\PDC2008\BB34 Live Services Notifications, Awareness, and Communications.wmv@#422082, Context=DHnQ, Context=MxAc, Context=QFid, Context=RqLs, Mid = 245376 SMB2: R CREATE (0x5), Context=MxAc, Context=RqLs, Context=DHnQ, Context=QFid, FID=0xFFFFFFFF00000015, Mid = 245376 But for the last file when the copy dialog closes looks like this: SMB2: C CREATE (0x5), Name=gt\files\Media\Training\PDC2008\BB36 FAST Building Search-Driven Portals with Microsoft Office SharePoint Server 2007 and Microsoft Silverlight.wmv@#859374, Context=DHnQ, Context=MxAc, Context=QFid, Context=RqLs, Mid = 77 SMB2: R , Mid = 77 - NT Status: System - Error, Code = (58) STATUS_OBJECT_PATH_NOT_FOUND The main difference seems to be in the name, one is relative to the open file share, the other has gained the gt\files\media prefix which is the name of the DFS target. These failures are always preceded by logoff and back on of the SMB target. Might have to bump this one to PSS.

  Read the article

• WebDav rename fails on an Apache mod_dav install behind NginX

  - by The Daemons Advocate

  I'm trying to solve a problem with renaming files over WebDav. Our stack consists of a single machine, serving content through Nginx, Varnish and Apache. When you try to rename a file, the operation fails with the stack that we're currently using. To connect to WebDav, a client program must: Connect over https://host:443 to NginX NginX unwraps and forwards the request to a Varnish server on http://localhost:81 Varnish forwards the request to Apache on http://localhost:82, which offers a session via mod_dav Here's an example of a failed rename: $ cadaver https://webdav.domain/ Authentication required for Webdav on server `webdav.domain': Username: user Password: dav:/> cd sandbox dav:/sandbox/> mkdir test Creating `test': succeeded. dav:/sandbox/> ls Listing collection `/sandbox/': succeeded. Coll: test 0 Mar 12 16:00 dav:/sandbox/> move test newtest Moving `/sandbox/test' to `/sandbox/newtest': redirect to http://webdav.domain/sandbox/test/ dav:/sandbox/> ls Listing collection `/sandbox/': succeeded. Coll: test 0 Mar 12 16:00 For more feedback, the WebDrive windows client logged an error 502 (Bad Gateway) and 303 (?) on the rename operation. The extended logs gave this information: Destination URI refers to different scheme or port (https://hostname:443) (want: http://hostname:82). Some other Restrictions: Investigations into NginX's Webdav modules show that it doesn't really fit our needs, and forwarding webdav traffic to Apache isn't an option because we don't want to enable Apache SSL. Are there any ways to trick mod_dav to forward to another host? I'm open to ideas :).

  Read the article

• Remote Desktop Mobile mangles barcodes coming from scanner

  - by sfonck

  We have an application here using handhelds to scan barcodes. These handhelds are actually making a remote desktop session towards a server where the application runs. Works fine. Now we have bought some new Motorola MC55's running 'Windows Mobile 6.1 Classic', and when using the application over remote desktop: it mangles the characters of the barcodes.... I already tried following things: When scanning a barcode on the MC55 itself it is displayed correctly When scanning a barcode via the remote desktop into a notepad session it is incorrect. Played with all options of the 'Remote Desktop Mobile' - no result Disabled 'autocorrect' and 'suggest words when entering text' on the input settings - no result The strange things is: a barcode which consists of only numbers gets scanned correctly the mangled characters comes through in lower case For some codes \t is mangled in between (should normally be entered after the barcode) e.g.: 'PERIN4' becomes 'ERINp4' 'MGZB' becomes 'GZB m' 'BAK664' becomes 'AK664 b' 'MAGBFA01' becomes 'AGBFmA01' '5021879949500' gets scanned correctly Final solution: Suppllier of the handhelds said the handheld was sending the characters too fast over the remote desktop connection. They changed the handheld to wait for 50ms between sending each character, which produced correct results right now. Scanning a barcode became somewhat slower but it's almost not remarkable to endusers.

  Read the article

• Can a CNAME be a hostname

  - by pulegium

  This is bit of a theological question, but nonetheless... So, a server has a hostname, let's say the fqdn is hostname.example.com (to be really precise about what I mean, this is the name that is set in /etc/sysconfig/network). The very same server has multiple interfaces on different subnets. Let's say the IPs are 10.0.0.1 and 10.0.1.1. Now the question is, is it theoretically (mind you, this is important, I know that practically it works, but I'm interested in purely academic answer) allowed to have the following setup: interface1.example.com. IN A 10.0.0.1 interface2.example.com. IN A 10.0.1.1 hostname.example.com. IN CNAME interface1.example.com. OR should it rather be: hostname.example.com. IN A 10.0.0.1 interface2.example.com. IN A 10.0.1.1 interface1.example.com. IN CNAME hostname.example.com. I guess it's obvious which one is making more sense from the management/administration POV, but is it technically correct? The argument against the first setup is that a reverse lookup to 10.0.0.1 returns interface1.example.com and not what one might expect (ie the hostname: hostname.example.com), so the forward request and then sub sequential reverse lookups would return different results. Now, as I said, I want a theoretical answer. Links to RFC sections etc, that explicitly allows or disallows use of CNAME name as a hostname. If there's none, that's fine too, I just need to confirm. I failed to find any explicit statements so far, bar this book, where this situation is given as an example and implies that it can be done as one of the ways to avoid MX records pointing to a CNAME.

  Read the article

• Windows 7: Don't combine Taskbar Icons, but only display Icons

  - by cable729

  I've never really liked this feature about Win7, but I guess I just got used to it. The feature I don't like is mousing over the win7 icons when there are multiple windows of the same type open. You have to waste that extra time choosing the window after it pops up and it's just clunky. The XP taskbar was nice, because you didn't have to go through any of this, but it had the problem where you ran out of taskbar space fast. I often resized my taskbar to take care of this. However, on Windows 7, I don't use up even 1/3 of my taskbar. I have all this space I can use, and instead it's all squished to the left, making me take extra steps. Are there any applications I can use to get this desired behavior, or else what route would you recommend to take to write this behavior myself? My first thought would be C# and the Windows taskbar apis. PS. If it's not clear what I'm asking for, please let me know, I'll try to be more specific.

  Read the article

• Enabling syntax highlighting for LESS in Programmer's Notepad?

  - by Cody Gray

  When I don't feel like firing up the Visual Studio behemoth, or when I don't have it installed, I always turn to Programmer's Notepad. It's an amazingly light and fast little text editor, with the special advantage that it is completely platform-native and conforms to standard UI conventions. Therefore, please do not suggest that I consider using other text editors. I've already considered and rejected them because they do not use native UI controls. I like Programmer's Notepad, thank you very much. Unfortunately, I've recently begun to learn, use, and love LESS for all of my CSS coding needs, and it appears that Programmer's Notepad is not bundled with a syntax highlighting scheme for LESS. Does anyone know if there is—by chance and good fortune—one already available somewhere on the web that some kind soul has tediously prepared? If not, how can I go about writing one of my own? Is there a way to build on the existing CSS scheme? It's also possible that any code coloring scheme designed for Scintilla-based editors will work, as Programmer's Notepad is based on the Scintilla control. If you know of a LESS highlighting scheme for Scintilla-based editors, and how to use that with Programmer's Notepad, please suggest that as well.

  Read the article

• Unzip individual files from multiple zip files and extract those individual files to home directory

  - by James P.

  I would like to unzip individual files. These files have a .txt extension. These files also live within multiple zipped files. Here is the command I'm trying to use. unzip -jn /path/to/zipped/files/zipArchiveFile2011\*.zip /path/to/specific/individual/files/myfiles2011*.txt -d /path/to/home/directory/for/extract/ From my understanding, the -j option excludes directories and will extract only the txt files The -n option will not overwrite a file if it has already been extracted. I've also learned that the forward slash in /path/to/zipped/files/zipArchiveFile2011\*.zip is necessary to escape the wildcard (*) character. Here is sample of error messages I'm coming accross: Archive: /path/to/zipped/files/zipArchiveFile20110808.zip caution: filename not matched: /path/to/specific/individual/files/myfiles20110807.txt caution: filename not matched: /path/to/specific/individual/files/myfiles20110808.txt Archive: /path/to/zipped/files/zipArchiveFile20110809.zip caution: filename not matched: /path/to/specific/individual/files/myfiles20110810.txt caution: filename not matched: /path/to/specific/individual/files/myfiles20110809.txt I feel that I'm missing something very simple. I've tried using single quotes (') and double quotes (") around directory paths. But no luck.

  Read the article

• Any Recommendations for a Web Based Large File Transfer System?

  - by Glen Richards

  I'm looking for a server software product that: Allows my users to share large files with: The general public securely to 1 or more people (notification via email, optionally with a token that gives them x period of time to download) Allows anyone in the general public to share files with my users. Perhaps by invitation. Has to be user friendly enough to allow my users to use this with out having to bug me as the admin. It needs to be a system that we can install on our own server (we don't want shared data sitting on anyone else's server) A web based solution. Using some kind or secure comms channel would be good too, eg, ssh Files to share could be over 1 GB. I found the question below. WebDav does not sound user friendly enough: http://serverfault.com/questions/86878/recommendations-for-a-secure-and-simple-dropbox-system I've done a lot of searching, but I can't get the search terms right. There are too many services that provide this, but I want something we can install on our own server. A last resort would be to roll my own. Any ideas appreciated. Glen EDIT Sorry Tom and Jeff but Glen specifically says that he's looking for a 'product' so given that I specialise in this field thought that my expertise in this area may have been of use to him. I don't see how him writing services is going to be easy for him to maintain going forward (large IT admin overhead) or simple for his users and the general public to work with.

  Read the article

• How to remove a plain text protecting single quote from all the selected cells in LibreOffice Calc?

  - by Ivan

  I've imported a CSV file having the first column to be date-time values in ISO 8601 format like 2012-01-01T00:00:00.000Z for the first moment of the year 2012. Then, willing to make LibreOffice to recognize the format (as I was looking forward to plot a diagram), I've selected the column, chosen Format Cells... and entered the custom time format as YYYY-MM-DDTHH:MM:SS.000Z And this seems to work if... I edit a cell to remove a hidden single-quote from its beginning (which serves to protect a cell content from being interpreted) as all the newly formatted cells now store values like '2012-01-01T00:00:00.000Z (note the single quote - it is only visible when you edit a particular cell). And I am to do so for all the cells in the column. How can I automate this? UPDATE: I've already found a solution for the particular case of mine: it helps to set a column format to "time" in the CSV import dialogue. But I am still curious how could this be done in case I wouldn't have the original .csv data file to import but only the .ods file with the data already imported without the format specified at the import time.

  Read the article

• Reverse SSH Tunnel

  - by chris

  I am trying to forward web traffic from a remote server to my local machine in order to test out some API integration (tropo, paypal, etc). Basically, I'm trying to setup something similar to what tunnlr.com provides. I've initiated the ssh tunnel with the command $ssh –nNT –R :7777:localhost:5000 user@server Then I can see that server has is now listening on port 7777 with user@server:$netstat -ant | grep 7777 tcp 0 0 127.0.0.1:7777 0.0.0.0:* LISTEN tcp6 0 0 ::1:7777 :::* LISTEN $user@server:curl localhost:7777 Hello from local machine So that works fine. The curl request is actually served from the local machine. Now, how do I enable server.com:8888 to be routed through that tunnel? I've tried using nginx like so: upstream tunnel { server 0.0.0.0:7777; } server { listen 8888; server_name server.com; location / { access_log /var/log/nginx/tunnel-access.log; error_log /var/log/nginx/tunnel-error.log; proxy_pass http://tunnel; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_redirect off; } } From the nginx error log I see: [error] 11389#0: *1 connect() failed (111: Connection refused) I've been looking at trying to use iptables, but haven't made any progress. iptables seems like a more elegant solution than running nginx just for tunneling. Any help is greatly appreciated. Thanks!

  Read the article

• Why are UDP messages from outside the network received but not delivered?

  - by Warren Pena

  I have an Ubuntu Server 10.04 application I've developed that receives messages over a UDP port. The ultimate purpose of this application is to receive messages sent from workers' 3G modems out in the field. If use netcat on either another ubuntu Server or my Vista laptop (both on the same LAN as my test machine) to send a message, the message arrives correctly and appears in my application. However, if I go out to my car and use its 3G modem to send a message from the same Vista laptop, it doesn't work. If I run tcpdump -A, I see the message arrive correctly, but it's never delivered to my application. Clearly, the OS is the one making the choice not to deliver the messages (else they wouldn't appear in tcpdump nor would my app receive them when coming from local machines). I have not installed any firewall software on this machine, nor am I aware of anything installed by default that would block the traffic. sudo iptables --list returns Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination I'm not too familiar with iptables, but it looks to me like that's telling it to not do anything. What could be going on that's preventing my messages from being delivered?

  Read the article

• setting up synergy (multi-computer shared input devices) new to mac

  - by pedalpete

  I've just gotten a mac and the first thing I'm trying to do in setting it up for dev is to set-up synergy. I've run into countless issues, and am making progress, but that 'mac's just work' theory is getting tired really fast. I'd prefer running the mac as the server, as it's a desktop. why use my pc(laptop) as the server. So i downloaded synergy, and tried to edit the 'synergy.conf' file. First with textmate, then with apple script. Neither of these applications will open the file. Even after changing textmate to use plain text format and switching off a few other things to make it into a plain text editor. No good. Uh, isn't that what these script/text editors are for? Then I found SyneryKM which is a package to run synergy on osx. Took LOTS of fiddling, but I think I finally kinda got it figured out. I've got my pc & mac both running synergy. However, my pc will only connect to synergy using the ip address. No problem, however, my mac won't connect to itself as a synergy server using the IP address. If I use the ip address as a screen in the 'server configuration file', i get a 'Error: unknown screen name mymac'. I know this shouldn't be super complicated, and possibly not the place to find answers about synergy, but I couldn't find a better place, and there has been some talk of synergy here. Any chance somebody can help with this?

  Read the article

• Easiest way to allow direct HTTPS connection in Intercept mode?

  - by Nick Lin

  I know the SSL issue has been beaten to death I'm using DNS redirect to force my clients to use my intercept proxy. As we all know, intercepting HTTPS connection is not possible unless I provide a fake certificate. What I want to achieve here is to allow all HTTPS requests connect directly to the source server, thus bypassing Squid: HTTP connection Proxy by Squid HTTPS connection Bypass Squid and connect directly I spent the past few days goolging and trying different methods but none worked so far. I read about SSL tunneling using the CONNECT method but couldn't find any more information on it. I tried a similar method in using RINETD to forward all traffic going through port 443 of my Squid back to the original IP of www.pandora.com. Unfortunately, I did not realize all other HTTPS requests are also forwarded to the IP of www.pandora.com. For example, https://www.gmail.com also takes me to https://www.pandora.com Since I'm running the Intercept mode, the forwarding needs to be dynamic and match each HTTPS domain name with proper original IP. Can this be done in Squid or iptables? Lastly, I'm directing traffic to my Squid server using DNS zone redirect. For example, a client requests www.google.com, my DNS server directs that request to my Squid IP, then my transparent Squid will proxy that request. Will this set up affect what I'm trying to achieve? I tried many methods but couldn't get it to work. Any takes on how to do this?

  Read the article

• How do I identify and fix the cause of transaction log growth on SIMPLE recovery model databases?

  - by Stuart B

  I recently upgraded our SQL Server 2008 installations to service pack 2. One of our databases is on the simple recovery model, but its transaction log is growing extremely fast. The path I'm currently investigating is that we have a transaction somewhere out there stuck in active state. Here is why: select name, recovery_model_desc, log_reuse_wait_desc from sys.databases where name in ('SimpleDB') name recovery_model_desc log_reuse_wait_desc SimpleDB SIMPLE ACTIVE_TRANSACTION When I check my active transactions, I get the following. Note that I installed SP2 and restarted our server on 12/25 at around noonish. select transaction_id, name, transaction_begin_time, transaction_type from sys.dm_tran_active_transactions transaction_id name transaction_begin_time transaction_type 233 worktable 2010-12-25 12:44:29.283 2 236 worktable 2010-12-25 12:44:29.283 2 238 worktable 2010-12-25 12:44:29.283 2 240 worktable 2010-12-25 12:44:29.283 2 243 worktable 2010-12-25 12:44:29.283 2 245 worktable 2010-12-25 12:44:29.283 2 62210 tran_sp_MScreate_peer_tables 2010-12-25 12:45:00.880 1 55422856 user_transaction 2010-12-28 16:41:56.703 1 55422889 SELECT 2010-12-28 16:41:57.303 2 470 LobStorageProviderSession 2010-12-25 12:44:30.510 2 Note that according to the documentation a transaction_type of 1 means read/write, and 2 means read-only. So, my line of thinking is that the trans_sp_MScreate_peer_tables transaction is stuck for some reason and holding up transaction log truncation. Is this a plausible scenario? Correct me if my line of thinking is off, as I'm not a SQL Server expert. If this is correct, how do I erase that transaction so that my transaction log is truncated as usual?

  Read the article

• Dell Poweredge 2600 RAID Transfer How-to

  - by DCookie

  Help, please! Hardware: Dell Poweredge 2600 PERC 4 SCSI Drives, 1 standalone 3 in a RAID 5 configuration OS: Windows 2000 Server In other words, a fairly old system. Anyway, we are in the process of taking over support for this site. The current tech wants out and is fading from view fast, so we need to solve this problem: The standalone disk (where the OS was) failed. We've replaced the disk, installed the OS, but need to know exactly how to proceed from here. I've never worked with a RAID system before, so I don't want to touch anything without knowing what I'm doing. We are not certain if the site will want us to attempt to recover the array or wait for the old tech to become available. We have replaced the server with a temporary box, and recovered MOST of the data from an online backup service. However, the other tech failed to backup a part of the data and the only copy of it is on this RAID array. Hence, our caution. We have poked minimally around in the boot-up PERC config utility, and it seems to me that that's where we'll need to be to reclaim the array. Another possibility is that there is some Dell software for the RAID controller we need to acquire. Can anyone provide clues as to how to proceed from here? Any help GREATLY appreciated.

  Read the article

• How to tunnel a local port onto a remote server

  - by Trevor Rudolph

  I have a domain that i bought from DynDNS. I pointed the domain at my ip adress so i can run servers. The problem I have is that I don't live near the server computer... Can I use an ssh tunnel? As I understand it, this will let me access to my servers. I want the remote computer to direct traffic from port 8080 over the ssh tunnel to the ssh client, being my laptop's port 80. Is this possible? EDIT: verbose output of tunnel macbookpro:~ trevor$ ssh -R *:8080:localhost:80 -N [email protected] -v OpenSSH_5.2p1, OpenSSL 0.9.8r 8 Feb 2011 debug1: Reading configuration data /Users/trevor/.ssh/config debug1: Reading configuration data /etc/ssh_config debug1: Connecting to site.com [remote ip address] port 22. debug1: Connection established. debug1: identity file /Users/trevor/.ssh/identity type -1 debug1: identity file /Users/trevor/.ssh/id_rsa type -1 debug1: identity file /Users/trevor/.ssh/id_dsa type 2 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.9p1 Debian-5ubuntu1 debug1: match: OpenSSH_5.9p1 Debian-5ubuntu1 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.2 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Host 'site.com' is known and matches the RSA host key. debug1: Found key in /Users/trevor/.ssh/known_hosts:9 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,password debug1: Next authentication method: publickey debug1: Trying private key: /Users/trevor/.ssh/identity debug1: Trying private key: /Users/trevor/.ssh/id_rsa debug1: Offering public key: /Users/trevor/.ssh/id_dsa debug1: Authentications that can continue: publickey,password debug1: Next authentication method: password [email protected]'s password: debug1: Authentication succeeded (password). debug1: Remote connections from *:8080 forwarded to local address localhost:80 debug1: Requesting [email protected] debug1: Entering interactive session. debug1: remote forward success for: listen 8080, connect localhost:80 debug1: All remote forwarding requests processed

  Read the article

• Trouble with IIS SMTP relaying to Gmail

  - by saille

  I appreciate that similar questions have been asked about how to setup SMTP relaying with IIS's virtual SMTP server. However I'm still completely stumped on this problem. Here's the setup: IIS 6.0 SMTP server running on Win2k3 box with a NAT'ed IP. Company uses Gmail for all email services. An app on the box needs to send email, so normally we'd just set the app up to talk to smtp.gmail.com directly, but this app doesn't support TLS. Easy, we just setup a local SMTP relay right? So I thought. What we have done so far: Setup IIS SMTP server to relay to smtp.gmail.com, as per these excellent instructions: http://fmuntean.wordpress.com/2008/10/26/how-to-configure-iis-smtp-server-to-forward-emails-using-a-gmail-account/ The local SMTP relay allows anonymous access. Both the local IP and the loopback IP have been explicitly allowed in the Connection... and Relay... dialogs. Tried sending email from 2 different apps via the local SMTP server, but failed (the emails end up in the Queue folder, but never get sent). The IIS logs show the conversation with the local app, but zero conversation happening with smtp.gmail.com. The port used by gmail is open outbound, and indeed the apps we have that support TLS can send email directly via smtp.gmail.com, so there is no problem with the network. At this point I changed the smtp settings in IIS SMTP server to use a different external SMTP server and hey-presto, the local apps can send email via local IIS SMTP relay. So smtp.gmail.com fails to work with our IIS SMTP relay, but another 3rd party SMTP service works fine. We need to use smtp.gmail.com, so how to troubleshoot this one?

  Read the article

• Installing Munin on Centos 6

  - by justinhj

  I've hit problems installing munin on Centos 6. This seems to be a conflict between parts of Perl. I think the version of Perl is newer on Centos 6 (v5.10.1) When installing munin via yum I get errors relating to perl dependencies as below. I'm not a big enough whiz at yum or rpm to figure out the issue. Munin documentation does not yet talk about installing to Centos 6.0 Error: Package: munin-node-1.4.2-0.rpl1.el5.noarch (/munin-node-1.4.2-0.rpl1.el5.noarch) Requires: perl(Net::SNMP) Error: Package: munin-1.4.2-0.rpl1.el5.noarch (/munin-1.4.2-0.rpl1.el5.noarch) Requires: bitstream-vera-fonts Error: Package: munin-1.4.2-0.rpl1.el5.noarch (/munin-1.4.2-0.rpl1.el5.noarch) Requires: perl(HTML::Template) Error: Package: munin-1.4.2-0.rpl1.el5.noarch (/munin-1.4.2-0.rpl1.el5.noarch) Requires: perl-Net-SNMP Error: Package: munin-common-1.4.2-0.rpl1.el5.noarch (/munin-common-1.4.2-0.rpl1.el5.noarch) Requires: perl(:MODULE_COMPAT_5.8.8) Error: Package: munin-node-1.4.2-0.rpl1.el5.noarch (/munin-node-1.4.2-0.rpl1.el5.noarch) Requires: perl(DBI) Error: Package: munin-1.4.2-0.rpl1.el5.noarch (/munin-1.4.2-0.rpl1.el5.noarch) Requires: perl(Log::Log4perl) Error: Package: munin-node-1.4.2-0.rpl1.el5.noarch (/munin-node-1.4.2-0.rpl1.el5.noarch) Requires: perl(LWP::Simple) Error: Package: munin-node-1.4.2-0.rpl1.el5.noarch (/munin-node-1.4.2-0.rpl1.el5.noarch) Requires: perl(:MODULE_COMPAT_5.8.8) Error: Package: munin-1.4.2-0.rpl1.el5.noarch (/munin-1.4.2-0.rpl1.el5.noarch) Requires: perl(RRDs) Error: Package: munin-node-1.4.2-0.rpl1.el5.noarch (/munin-node-1.4.2-0.rpl1.el5.noarch) Requires: perl-Net-Server Error: Package: munin-1.4.2-0.rpl1.el5.noarch (/munin-1.4.2-0.rpl1.el5.noarch) Requires: perl(Date::Manip) Error: Package: munin-1.4.2-0.rpl1.el5.noarch (/munin-1.4.2-0.rpl1.el5.noarch) Requires: perl(:MODULE_COMPAT_5.8.8) Error: Package: munin-1.4.2-0.rpl1.el5.noarch (/munin-1.4.2-0.rpl1.el5.noarch) Requires: perl-Net-Server Error: Package: munin-1.4.2-0.rpl1.el5.noarch (/munin-1.4.2-0.rpl1.el5.noarch) Requires: perl(CGI::Fast) Error: Package: munin-1.4.2-0.rpl1.el5.noarch (/munin-1.4.2-0.rpl1.el5.noarch) Requires: perl(Time::HiRes)

  Read the article

• ipvsadm lists a few hosts by IP only, rest by name

  - by dmourati

  We use keepalived to manage our Linux Virtual Server (LVS) load balancer. The LVS VIPs are setup to use a FWMARK as configured in iptables. virtual_server fwmark 300000 { delay_loop 10 lb_algo wrr lb_kind NAT persistence_timeout 180 protocol TCP real_server 10.10.35.31 { weight 24 MISC_CHECK { misc_path "/usr/local/sbin/check_php_wrapper.sh 10.10.35.31" misc_timeout 30 } } real_server 10.10.35.32 { weight 24 MISC_CHECK { misc_path "/usr/local/sbin/check_php_wrapper.sh 10.10.35.32" misc_timeout 30 } } real_server 10.10.35.33 { weight 24 MISC_CHECK { misc_path "/usr/local/sbin/check_php_wrapper.sh 10.10.35.33" misc_timeout 30 } } real_server 10.10.35.34 { weight 24 MISC_CHECK { misc_path "/usr/local/sbin/check_php_wrapper.sh 10.10.35.34" misc_timeout 30 } } } http://www.austintek.com/LVS/LVS-HOWTO/HOWTO/LVS-HOWTO.fwmark.html [root@lb1 ~]# iptables -L -n -v -t mangle Chain PREROUTING (policy ACCEPT 182G packets, 114T bytes) 190M 167G MARK tcp -- * * 0.0.0.0/0 w1.x1.y1.4 multiport dports 80,443 MARK set 0x493e0 62M 58G MARK tcp -- * * 0.0.0.0/0 w1.x1.y2.4 multiport dports 80,443 MARK set 0x493e0 [root@lb1 ~]# ipvsadm -L IP Virtual Server version 1.2.1 (size=4096) Prot LocalAddress:Port Scheduler Flags -> RemoteAddress:Port Forward Weight ActiveConn InActConn FWM 300000 wrr persistent 180 -> 10.10.35.31:0 Masq 24 1 0 -> dis2.domain.com:0 Masq 24 3 231 -> 10.10.35.33:0 Masq 24 0 208 -> 10.10.35.34:0 Masq 24 0 0 At the time the realservers were setup, there was a misconfigured dns for some hosts in the 10.10.35.0/24 network. Thereafter, we fixed the DNS. However, the hosts continue to show up as only their IP numbers (10.10.35.31,10.10.35.33,10.10.35.34) above. [root@lb1 ~]# host 10.10.35.31 31.35.10.10.in-addr.arpa domain name pointer dis1.domain.com. OS is CentOS 6.3. Ipvsadm is ipvsadm-1.25-10.el6.x86_64. kernel is kernel-2.6.32-71.el6.x86_64. Keepalived is keepalived-1.2.7-1.el6.x86_64. How can we get ipvsadm -L to list all realservers by their proper hostnames?

  Read the article

• USB Hardware vs. Software Write Lock

  - by TreyK

  I'm in the market for a USB flash drive, and remember this cool feature a tiny 32MB flash drive of mine had: a write lock switch. This seemed like it would be an amazing feature to have as a shield against any nastiness happening to the drive on an unfamiliar computer. However, very few drives on the market offer this feature. Instead, it seems that forms of software protection are the more prominent method. This software protection causes me a bit of uneasiness, as it seems like this software wouldn't be nearly as bulletproof as a physical switch. Also, levels of protection seem to vary from product to product. Being able to protect certain folders from reading and/or writing would be nice, but is the security trade-off worth it? Just how effective can this software protection be? Wouldn't a simple format be able to clean any drive with software protection? My drive must also be compatible with Windows XP, Vista, and 7, as well as Linux and Mac. What would be the best way forward for getting a well-sized (~8GB) flash drive with a strong write protection implementation, for little or no more than a regular drive? Thanks.

  Read the article

< Previous Page | 299 300 301 302 303 304 305 306 307 308 309 310  | Next Page >