Search Results

Search found 8782 results on 352 pages for 'krishnadas pc'.

Page 304/352 | < Previous Page | 300 301 302 303 304 305 306 307 308 309 310 311  | Next Page >

• Cannot set video resolution above 640x480 after installing Windows XP SP2

  - by waanders

  I've installed Windows XP SP2 on a computer (there was not SP at all). Now the display settings are set back to 640x480 and 4 bits colors. And I can't change it, it's the only option in Settings tab of the Display dialog of Windows. The screen look awful now, how can I solve this problem? UPDATE: Seems to be a problem with the video driver (thanks @Karan and @Hennes). I did run Speccy (PC-Wizard freezes the computer) and this is a part of the log file: Summary Operating System Microsoft Windows XP Professional 32-bit SP3 CPU Intel Celeron Willamette 0.18um Technology RAM 512 MB DDR @ 133MHz (2.5-3-3-6) Motherboard COMPAQ 0838h (FC-478) Graphics Standard Monitor (640x480@1Hz) Hard Drives 19.0GB Maxtor 2B020H1 (PATA) Optical Drives No optical disk drives detected Audio No audio card detected ... Graphics Monitor Name Standard Monitor on Current Resolution 640x480 pixels Work Resolution 640x450 pixels State enabled, primary Monitor Width 640 Monitor Height 480 Monitor BPP 4 bits per pixel Monitor Frequency 1 Hz Device \\.\DISPLAY1 OpenGL Version 1.1.0 Vendor Microsoft Corporation Renderer GDI Generic GLU Version 1.2.2.0 Microsoft Corporation Values GL_MAX_LIGHTS 8 GL_MAX_TEXTURE_SIZE 1024 GL_MAX_TEXTURE_STACK_DEPTH 10 GL Extensions GL_WIN_swap_hint GL_EXT_bgra GL_EXT_paletted_texture GL_EXT_bgra

  Read the article

• Samba between Ubuntu server 10.10 and Windows Vista, Windows 7

  - by chepukha

  I have a linux box running Linux server ubuntu 10.10. I have installed Samba on this linux box and want to share files with my laptops which run Windows Vista home and Windows 7 home. I have been struggling with the setup for almost a month but couldn't get it right. If I try to access share folder from Windows Vista, I get message "Windows cannot access \\server_ip_address". Error code: 0x80070035. The network path was not found. If I access from Windows 7, then after entering password to login I can see the list of share folders on Linux box. But if I click on a share folder, I get the same error message as above. Tail /var/log/samba/log.windows7-pc I got the following message: [2011/03/16 00:17:41.427238, 0] smbd/service.c:988(make_connection_snum) canonicalize_connect_path failed for service sharemedia, path /root/sharemedia Here is my setting in smb.conf [global] share modes = yes netbios name = Samba workgroup = WORKGROUP wins support = yes encrypt passwords = true [sharemedia] comment = Tesing sharing using Samba path=/root/sharemedia/ public = yes valid users = samba_usr_name ; make sure all files are sensible permissions create mask = 0660 force create mask = 0660 directory mask = 2770 force directory mask = 2770 directory security mask = 0000 ; Normal share parameters read only = no browseable = yes writable = yes guest ok = no

  Read the article

• Need help using a super scope

  - by Vdub

  I have a windows server 2008 r2 standard running our DCHP, DNS, and AD. also I have (3) HP Pro Curve 2510-G switches (J9280A). Right now our LAN is set up 192.168.50.2-192.168.50.254 on our sub-net (A) and another scope with 192.168.51.2-192.168.51.254 sub-net (B) both have sub-net mask of 255.255.255.0. The same server is our DNS which is 192.168.50.242 and our firewall (watchguard) is the gateway at 192.168.50.1. Right now the sub-net (B) does not have DHCP active so only sub-net (A) is giving a pool. My problem is that we are trying to have open WiFi on our network and i am assuming that i can use the sub-net (B) for that if i activate it and use sub-net (A) for our staff only. I have noticed that when i set up a static on a client pc and set it to 192.168.51.x i cannot use the DNS of 192.168.50.242 however i can use 8.8.8.8 and it works fine, i am guessing that because it is on a different sub-net? Forgive me as i am very new at this and dont know a lot. Is there easy way with the equipment i have to a accommodate wifi for hundreds of people without causing problems for our staff? (multiple same IP address assigns) I appreciate any and all info!

  Read the article

• Is it possible to boot Windows 7 from when you're harddrive's partition with two OSes?

  - by Muhammad

  I have a PC with a hard drive that's partition into home directories for Windows 7 and Ubuntu. I primarily use Windows 7 and occasionally (once a week) use Ubuntu. When I boot up my computer, I usually get taken to a boot menu that includes about 5 different options: 3 are for Ubuntu's configurations, one's for swap, and the forth is for Windows 7. Then after I select Windows 7 or Ubuntu from this menu, I get taken to another menu that again asks me for Windows 7 or Ubuntu. This time, there's only 2 options, Windows 7 and Ubuntu. [Side note: out of experience I realized most boot menus are timed and so are these.] So if I ever turn my computer on without actually sitting in front of it for a few minutes, it boots into Ubuntu. I'm trying to figure out what I need to do so I can first get rid of the 2 boot menus. And if possible, I'm looking for help changing my boot options where I can load up Windows 7 (even with the boot menu wait of about 30 seconds). My harddrive's partition's laid out like this: Windows 7 (C partition) Multimedia (D partition, I just use this for backup/non-OS stuff) Ubuntu (home directory) Swap Is there any other information I need to provide?

  Read the article

• RAID6 mdraid -> LVM -> EXT4 root with GRUB2?

  - by Rotonen

  2012-03-31 Debian Wheezy daily build in VirtualBox 4.1.2, 6 disk devices. My steps to reproduce so far: Setup one partition, using the entire disk, as a physical volume for RAID, per disk Setup a single RAID6 mdraid array out of all of those Use the resulting md0 as the only physical volume for the volume group Setup your logical volumes, filesystems and mount points as you wish Install your system Both / and /boot will be in this stack. I've chosen EXT4 as my filesystem for this setup. I can get as far as GRUB2 rescue console, which can see the mdraid, the volume group and the LVM logical volumes (all named appropriately on all levels) on it, but I cannot ls the filesystem contents of any of those and I cannot boot from them. As far as I can see from the documentation the version of GRUB2 shipped there should handle all of this gracefully. http://packages.debian.org/wheezy/grub-pc (1.99-17 at the time of writing.) It is loading the ext2, raid, raid6rec, dosmbr (this one is in the list of modules once per disk) and lvm modules according to the generated grub.cfg file. Also it is defining the list of modules to be loaded twice in the generated grub.cfg file and according to quick Googling around this seems to be the norm and OK for GRUB2. How to get further by getting GRUB2 to actually be able to read the content of the filesystems and boot the system? What am I wrong about in my assumptions of functionality here? EDIT (2012-04-01) My generated grub.cfg: http://pastie.org/3708436 It seems it first makes my /usr logical volume the root and that might be source of the failure? A grub-mkconfig bug? Or is it supposed to get access to stuff from /usr before / and /boot? /boot is on / for me - no separate boot logical volume.

  Read the article

• Hardware issue: computer plays beep sounds at startup, and then turns off

  - by Darkkurama

  Turns out that after moving, my computer got damaged somehow. I installed my computer 2 days ago. I didn't check the state of the hardware parts and turned the pc on recklessly, not realizing that the cpu fan was dettached from the cpu. After this I reattached the fan. The computer worked kind of faulty after that, because at the time of startup, it would play a long beep (different from the normal beep) and won't display anything. I tried restarting after this incident and it got fixed (don't know how, but it did), and I was even able to play some videogames for some hours (more than 5). This morning I tried to get this issue sorted out by checking again the cpu and in general, the connections, and for my surprise, at the time of turning it on again, the computer wouldn't boot at all. I reapplied some thermal paste to the cpu and fan, but got no results (I did this because the old paste was very badly distributted along the surface of both cpu and fan). Now every time I turn it on, the computer acts randomly: sometimes at startup, it plays a long continous beep and then turns off. one time it played a long continous beep and got to the windows password input screen, but then it turned off More frequently, I turn it on and after some seconds, it turns off without any sound. You can check this video I recorded, which features how the computer behaves most of the time Another one I tried troubleshoting it myself by disconnecting my graphic card, rams, HDD and even the cpu and its fan with no result. Computer specs: Intel Core 2 Quad Q6600 processor, Nvidia xfx gtx 260 black edition, 4 GB ram, 500 GB hard drive, Windows 7 64 bit

  Read the article

• Gwibber doesnt launch post upgrade

  - by Arcath

  i updated my pc from ubuntu 9.10 to 10.04 and one of the things i was looking forward too was the "me menu" and gwibber. For some reason gwibber doesnt launch at all. when i try to launch it from terminal i get: [21:02:20][arcath@Highgate ~]$ gwibber ** (gwibber:8182): WARNING **: Trying to register gtype 'WnckWindowState' as enum when in fact it is of type 'GFlags' ** (gwibber:8182): WARNING **: Trying to register gtype 'WnckWindowActions' as enum when in fact it is of type 'GFlags' ** (gwibber:8182): WARNING **: Trying to register gtype 'WnckWindowMoveResizeMask' as enum when in fact it is of type 'GFlags' Traceback (most recent call last): File "/usr/bin/gwibber", line 50, in <module> from gwibber import client File "/usr/lib/python2.6/dist-packages/gwibber/client.py", line 3, in <module> import gtk, gobject, gwui, util, resources, actions, json, gconf File "/usr/lib/python2.6/dist-packages/gwibber/gwui.py", line 2, in <module> import os, json, urlparse, resources, util File "/usr/lib/python2.6/dist-packages/gwibber/util.py", line 2, in <module> from microblog.util.couch import RecordMonitor File "/usr/lib/python2.6/dist-packages/gwibber/microblog/util/couch.py", line 10, in <module> OAUTH_DATA = desktopcouch.local_files.get_oauth_tokens() File "/usr/lib/python2.6/dist-packages/desktopcouch/local_files.py", line 323, in get_oauth_tokens oauth_token_secrets = cf.items_in_section("oauth_token_secrets")[0] File "/usr/lib/python2.6/dist-packages/desktopcouch/local_files.py", line 189, in items_in_section raise ValueError("Section %r not present." % (section_name,)) ValueError: Section 'oauth_token_secrets' not present. and i cant work out whats wrong with it. Can anyone point me in the right direction?

  Read the article

• Cable management techniques

  - by cornjuliox

  How do you manage the giant jungle of cables behind your PC? When you have 2 or more PCs next to each other, you wind up with this giant mess cables that's a pain in the neck to clean especially when both computers are running 24/7 and any fidgeting with the cables is likely to cause data loss and/or angry users. So far I've tried masking tape, cable ties and plain old string but none have been very effective. The masking tape kept the cables in place, but over time they ended up leaving this awful sticky residue on the sides of the cables that just won't come off gets all over your fingers and is horrible horrible horrible. I have nightmares about that stuff. We used cable ties and 'folded' up some of the longer cables so that they weren't any longer than they needed to be, but this meant that the position of some of our devices like the keyboard and the mouse were essentially 'fixed' until we removed the ties. The string didn't work much differently and required that we tie them properly or risk it coming loose. I would switch to a wireless keyboard and mouse, but I don't want to have to deal with the added expense of batteries, even the rechargable ones. Plus I don't want them to die on me at a crucial moment (happened to me once while playing Firearms _<). How do large offices and data centers manage their masses of cable?

  Read the article

• Cable management techniques

  - by cornjuliox

  How do you manage the giant jungle of cables behind your PC? When you have 2 or more PCs next to each other, you wind up with this giant mess cables that's a pain in the neck to clean especially when both computers are running 24/7 and any fidgeting with the cables is likely to cause data loss and/or angry users. So far I've tried masking tape, cable ties and plain old string but none have been very effective. The masking tape kept the cables in place, but over time they ended up leaving this awful sticky residue on the sides of the cables that just won't come off gets all over your fingers and is horrible horrible horrible. I have nightmares about that stuff. We used cable ties and 'folded' up some of the longer cables so that they weren't any longer than they needed to be, but this meant that the position of some of our devices like the keyboard and the mouse were essentially 'fixed' until we removed the ties. The string didn't work much differently and required that we tie them properly or risk it coming loose. I would switch to a wireless keyboard and mouse, but I don't want to have to deal with the added expense of batteries, even the rechargable ones. Plus I don't want them to die on me at a crucial moment (happened to me once while playing Firearms _<). I know that there are people out there with home/office networks a thousand times more convoluted than mine, so

  Read the article

• HP G61 Laptop wont boot- display stays off, caps and num lock indicators blink repeatedly

  - by Benguy12

  I had my HP G61 laptop running in sleep for a while. When I came back to it about a half-hour later, it was no longer in sleep mode - the power light and the Wi-Fi indicator light were on (I keep Wi-Fi off becuase I use a wired connection) - but nothing was showing on screen. In fact, the display wasn't even turned on. So I let it sit for about 10 minutes but nothing happened. I did a force shut down and rebooted. Instead of a normal boot, the display didnt turn on, the Wi-Fi indicator was off, and the Caps Lock and Num Lock lights just blinked repeatedly. On the external keyboard i use, none of the light indicators were blinking or even on. I tried force shut-down again 10 times, then unplugged all connections except for the power cable (my laptop battery dosent hold a charge for more than 2 minutes, so I always must have a wall connection) and tried to boot again but still nothing happened. I unplugged the battery and even then nothing happened. I also tried booting with the disk drive open, and then with it closed again. On the time it was closed, I was able to successfully boot into Windows, but recieved a "Windows did not shut-down sucessfully" notice. Does anybody know why this may have happened? My PC's specs: Windows 7 Home Premium, 64-bit 4GB of physical RAM, 8GB of vRAM (on a flash drive) AMD Vision x64 processor (don't know any other specs about it) ATI Radeon graphics card, 392 MB DVD-R/W lightscribe drive 2 External hard-disks (first one is 1.5TB, second one is 1TB) custom boot-screen and boot-annimation Standard BIOS apps running before sleep: firefox 10.4 itunes 10.6 adobe photoshop extended CS5.1 rockstar games social club (running in background) microsoft powerpoint 2010 professional edition google chrome I was NOT running Aero or any fancy themes - I was using the normal windows classic theme. I have a desktop icon manager application called Stardock Fences that was also running (it runs as a service/process).

  Read the article

• Cannot load from raid with grub

  - by Andrew Answer

  I have a RAID1 array on my Ubuntu 12.04 LTS and my /sda HDD has been replaced several days ago. I use this commands to replace: # go to superuser sudo bash # see RAID state mdadm -Q -D /dev/md0 # State should be "clean, degraded" # remove broken disk from RAID mdadm /dev/md0 --fail /dev/sda1 mdadm /dev/md0 --remove /dev/sda1 # see partitions fdisk -l # shutdown computer shutdown now # physically replace old disk by new # start system again # see partitions fdisk -l # copy partitions from sdb to sda sfdisk -d /dev/sdb | sfdisk /dev/sda # recreate id for sda sfdisk --change-id /dev/sda 1 fd # add sda1 to RAID mdadm /dev/md0 --add /dev/sda1 # see RAID state mdadm -Q -D /dev/md0 # State should be "clean, degraded, recovering" # to see status you can use cat /proc/mdstat After bebuilding completion "fdisk -l" says what I have not valid partition table /dev/md0. So 1) "update-grub" find only /sda and /sdb Linux, not /md0 2) "dpkg-reconfigure grub-pc" says "GRUB failed to install the following devices /dev/md0" I cannot load my system except from /sdb1 and /sda1, but in DEGRADED mode... This is my partial fdisk -l output: Disk /dev/sdb: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000667ca Device Boot Start End Blocks Id System /dev/sdb1 * 63 940910984 470455461 fd Linux raid autodetect /dev/sdb2 940910985 976768064 17928540 5 Extended /dev/sdb5 940911048 976768064 17928508+ 82 Linux swap / Solaris Disk /dev/md0: 481.7 GB, 481746288640 bytes 2 heads, 4 sectors/track, 117613840 cylinders, total 940910720 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/md0 doesn't contain a valid partition table Anybody can resolve this issue? I have big headache with this.

  Read the article

• Playing iPad to iPad Wifi games over PPTP VPN

  - by Pez Cuckow

  I'm trying to use a VPN to play iPad to iPad Wifi (Local) games over the internet. Normally you open the game on both iPad's, connect to the same Wifi point and they can "see" and speak to each other. I figure using a VPN I can put them both on the same network (either both on the VPN or one on the "real" network and one on the VPN). On my router I've set up PPTP VPN with the ip range 192.168.1.2-50, where the PC's on the real local network are assigned 192.168.1.100+ When I connect one of the iPads to the VPN, using an external WiFi network (BT Openzone) I can ping it as expected (from any machine on the local network). However the iPad's cannot "see" each other and none of the Wifi-Wifi games work. I've also tried connecting both iPad's to the same VPN, with the result the same. All machines on the local network (and those on the VPN) can ping the iPad's but none of the Wifi to Wifi games work. I've set both iPads to send all trafic over the VPN and if I check their external IP's they match that of the real network. Does anyone know how to fix this? And/or what is causing it? Or what further debug information I can provide? Note: I don't feel this is iPad specific so would prefer if this isn't moved to a Apple SuperUser equivalent

  Read the article

• RDP problem with Vista and Windows 7 destination

  - by MadBison

  I use a server a home to host a bunch of concurrently running Hyper-V VM's with different OS's and software for testing. I have Vista on the laptop, all latest SP's and patches. The server is Server 2008 R2, fully patched. The guests are a mix of XP, Vista, Server 2008 and Windows 7. If I connect to the Win XP or Server 2008 guest using RDP, it is always good. Very quick, no speed issues. If I connect to the Vista or Win 7 guests, the response time is so slow it is unusable. Usually 6 or 8 seconds, and at times it is to long to measure! This happens from both the laptop running Vista, and the server running Server 2008 R2. Does anyone know what the issue is with RDP on Vista and Windows 7 destinations? I did read this: http://blog.tmcnet.com/blog/tom-keating/microsoft/remote-desktop-slow-problem-solved.asp and that is not the problem I have applied that change to all PC's.

  Read the article

• server and user directly connected no pinging...

  - by jtzero

  I have a server(fedora 12) with two nics on it, directly connected to say 192.168.1.0 and 192.168.2.0 the route table looks like this Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.1.0 192.168.1.1 255.255.255.0 U 0 0 0 eth0 192.168.2.0 * 255.255.255.0 U 0 0 0 eth1 eth0 = 192.168.1.15 eth1 = 192.168.2.1 and a directly connected user (Mythdora) on the 192.168.2.0 network with ip 192.168.2.2 and route table like so Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.2.0 * 255.255.255.0 U 0 0 0 eth0 the cable is a crossover and it works all three nics work -- connected my laptop to either end and assign it a valid 192.168.2.0 ip the pings will work. In fact if I disconnect the server side and plug the eth cable into the laptop and have thte box ping the laptop continually remove the eth cable and plug it back into the server both sides ping... unfortunately the box realizing it's connected to a different pc wipes its route table after say ten minutes or so. if I do a trace route from a box on the 1.0 network to the servers 192.168.2.1 interface never get a reply from it. as a note at one point I could ping the server from the 192.168.2.2 box but the server couldnt ping the 192.168.2.2 box.

  Read the article

• Hyper-v on 2012R2 startup gen1 vm causes the host to freeze up

  - by sputnik

  I've searched a lot to resolve the following issue, but nothing helped me. My problem is, that starting up a first-gen vm locks up the whole host. Only a hard reset helps. Second-gen vm starts and runs perfectly. The freezes happened on 3 different vms. FreeBSD, Ubuntu, Windows Server 2008R2, while Windows 8.1 on second gen config works perfectly. Im using this pc mainly as a workstation. No eventlog errors nor dumps are generated. My system: Windows Server 2012R2 FX-8350, non OC ASRock 870 Extreme R2 (Crappy board imho) 32GB DDR3 1866@1600 (My motherboard, against the "support" for 1866ram won't work with full speed) 120GB SSD 4.5TB Storage space device I dont think that its due to my system, because vmware workstation was running without problems. Did I forget to configure something? Any help is appreciated. P.S: Even deactivating C1E, C6, C&Q didnt work. P.P.S: With no virtual network adapter set, the system still locks up. Creating a first gen vm without any hdds and network and launching works. Attaching a boot dvd causes the host to freeze. The host freezes as the gen1 vm begins to boot, doesn't matter if from dvd or hdd

  Read the article

• I can play "test" sounds, but no other audio works

  - by Callum

  I'm running Windows XP, and last night my PC was infected by a frustrating virus (one of those viruses that won't let you open virus checkers, etc). I finally killed it 2 hours later, but it involved some heavy duty anti-dote. One side effect is my audio is now gone. Except it's not entirely gone, because when I open the Realtek HD Audio Manager in the task bar, I can play all the "test" sounds. The speakers, the sound card, etc, are therefore working fine. But things like YouTube or Windows Media Player, there's no sound. I'm guessing there's a setting that needs to be reconfigured somewhere.. but where? Maybe relevant: One thing I did do last night was "play" with the system registry. Any help would be greatly appreciated. Thanks. SOLVED! The two hour battle with my computer virus resulted in my computer permanently thinking it was in Safe Mode, regardless of how it booted up. I was able to "fix" this by following the post by hsandler in this thread: http://www.petri.co.il/forums/showthread.php?t=23032&page=2 I then rebooted.. and let me tell you, the Windows Startup music has never sounded so sweet. Thanks to all, especially James, whose advice gave me a major clue as to what the problem was.

  Read the article

• pxe boot dos 7.x / 8.x on modern mainboard without floppy controller

  - by GitaarLAB

  How to pxe boot MS DOS 7.x / 8.x on a modern pc (mainboard without floppy controller) without using an external usb floppy drive? MS DOS 6.22 and earlier or other flavors pxe boot just fine on floppy-less hardware. But DOS 7.x and 8.x renders an error on boot: "Type the name of the Command Interpreter (e.g., C:\WINDOWS\COMMAND.COM) I read somewhere during research this was a rather unknown error, that started to become more common due to the advent of floppy-controller-less hardware. On some hardware (bios dependent) one could plug a usb-floppy-drive in the computer before booting (but that MIGHT also require it to be a "golden floppy drive" (as they where called back then). From a russian site (I read about a year ago and cannot find the hyperlink) MS-Dos versions 6.22 did some-kind of floppy-drive reset during initialization and since it couldn't connect to the floppy-host thus the error. How can I resolve this (without a physical external usb floppy)? Might there be some kind of virtual floppy-driver that could resolve this (for example to be loaded before the dos image loads)? Or could someone point me into the right direction (maybe even a hex-address and some further explanation or something)? I'm using syslinux by the way.

  Read the article

• Piecing together low-powered hardware for an RS-232 terminal server

  - by Fred

  I'm working on reconstructing my Cisco lab for training/educational purposes and I found that the actual terminal server I have is dead. I have a couple of 8-port PCI serial cards which would be more than ample for my lab, but I don't want to leave my personal computer running to be able to access the console ports. Ideally I would access the terminal server remotely, either by SSH/RDP to the box (depending on what OS I go with) or by installing a software package that allows me to telnet directly to a serial port. I know I've found a program that does this under Linux in the past but its name escapes me at the moment. I'm thinking about scavenging for some old hardware, on eBay or something, to put together a low-powered PC. Needs to be something that: Has Low-power consumption Has at least 2 PCI slots (though I certainly wouldn't complain about having more) Has onboard Ethernet (or, if not, another PCI or ISA slot (not shared)) Can be headless once an OS installed (probably Linux) I'm currently leaning towards an old fashioned Pentium (sub-133MHz era) but I am wondering if anybody else knows of another platform/mobo that would suit these needs. Alternatively, I've been considering buying a Raspberry Pi and a big USB hub along with a bunch of USB-Serial adapters but this sounds like it'd get messy quick with cables and adapters all over the place, and I may not even have the same ttyS#'s between boots.

  Read the article

• VirtualHost on WAMPSERVER not working

  - by Martin C

  I currently have WAMPSERVER 2.2 set up on my PC. I'm trying to set up a new host called pplocal.local I made the changes in httpd.conf to uncomment this: Include conf/extra/httpd-vhosts.conf Then, I edited httpd-vhosts.cong and I added the following: NameVirtualHost 127.0.0.1 <VirtualHost 127.0.0.1> DocumentRoot "E:/wamp2/www/" ServerName localhost </VirtualHost> <VirtualHost 127.0.0.1> DocumentRoot "E:/wamp2/www/pp/" ServerName pplocal.local <Directory "E:/wamp2/www/pp/"> Options Indexes FollowSymLinks MultiViews AllowOverride all Order Deny,Allow Deny from all Allow from 127.0.0.1 </Directory> CustomLog "E:\wamp2\logs\pplocal-access.log" common ErrorLog "E:\wamp2\logs\pplocal-error.log" Im my windows 'hosts' file I added: 127.0.0.1 localhost 127.0.0.1 pplocal.local Then, I restarted apache. If I type localhost in my browser I get the files at E:/wamp2/www/ If I type pplocal.local in my browser I get the files at E:/wam2/www/ instead of those at E:/wamp2/www/pp/ I have followed several tutorials and can't see what I'm doing wrong. I'm new to editing the files associated with apache so any advice is appreciated. Thanks

  Read the article

• Recover data from physically damaged harddrive. What are my options?

  - by Michael Kniskern

  I was trying to replace the power supply in my desktop PC and ended up physically damaging the data connection from the hard drive to the motherboard. The plastic shelf for the copper prongs on the hard drive broke into the cable. Here is a picture of my handy work: I went to Best Buy Geek Squad to discuss my options and they said that they will need to send it to the recover center it could cost anywhere between $250 to $1600 USD to recover the data out the hard drive Is this reasonable for data recovery from a physically damaged hard drive? Are there any other options I can explore? I am going to talk to the data doctors to see what my options are. Update I took the HD to Data Doctors, and they told me that the SATA connection was broken to they would need to replaced the data connector and then copy the data to a brand new hard drive. So, with the initial analysis, cost of replacement parts, and data recovery fee it came out to $865.00 USD. The technician specifically stated if this was an older hard drive that would just need to replace the data connector. But because there is specific information related to the individual hard drive in the flash ROM, they need to transfer the data to a brand new hard drive.

  Read the article

• What's the best way to completely remove everything from a computer, without re-installing?

  - by Connor W

  I have a friend who wants to sell their computer, but obviously all personal information and software that it is on it needs to be removed before doing so. Usually I would format and reinstall it, but I cannot easily get hold of the required XP DVDs and I'm not 100% sure the serial number is stuck on the case as usual so getting hold of it will probably require more effort than I'm prepared to spend. So, what's the best and quickest way to remove and uninstall everything from the PC without reinstalling it? Thanks. EDITS: I'm looking to remove things like Internet History and all installed programs, too. I know how to remove the history and each individual program, but that could take hours. The machine is not branded and therefore there is no website I can go to download recovery software. There is no recovery partition on the computer and I'm not aware of any recovery DVDs for it either. I can only assume it was installed from a retail copy, and therefore there is no way to recover it to factory settings. It needs to have XP installed, not any distribution of Linux. Like most average people, the person getting the computer will not understand what to do with a computer that doesn't have Windows installed, and software like Office does not work on Linux either. Buying another licence is not really an option either. She has just brought a laptop to replace the computer, so buying another licence for a computer that she's getting rid of doesn't really make sense. Thanks for all the help so far!

  Read the article

• USB Device Not Recognized

  - by Franky Chanyau

  Ok this one gets a little bit complicated but bare with me :D A client brought her computer in to be fixed about a week ago, she says she tried charging a new phone she bought from china and immediately after her usb keyboard and mouse stopped working (typical). I had a quick look at it but because I did not have time, I did a simple system restore and it seemed as if the issue was fixed. I promptly sent it back to her but a few days back she called saying that the issue has returned. Turns out the computer was riddled with some virus that also corrupted her XP install so I had to format the whole thing(yes I tried repairing). I hoped that the format would fix the keyboard and mouse issue but the whole thing has escalated and the computer will throw the "USB Device not recognized" error when I plug anything into the many usb ports it has. I have installed all the drivers (including the chip set drivers) for the pc and even tried the unplugging from the power for a while trick, still no luck. I am sure it is not a hardware issue, but may be wrong. This is way over my head. Can anyone help? Computer: HP Compaq DC7100, Intel Pentium 4, 512mb RAM OS: Windows XP Professional SP2

  Read the article

• Need help with local network printing while using VPN on Ubuntu 10.10 desktop

  - by MountainX

  I can print to my HP printer via the LAN when I'm not connected to the VPN. When connected to the VPN, printing fails. OpenVPN 2.1.0 x86_64-pc-linux-gnu [SSL] [LZO2] [EPOLL] [PKCS11] [MH] [PF_INET6] [eurephia] built on Jul 12 2010 I can ping the printer while connected to the VPN: $ ping 192.168.100.12 PING 192.168.100.12 (192.168.100.12) 56(84) bytes of data. 64 bytes from 192.168.100.12: icmp_req=1 ttl=255 time=9.17 ms --- 192.168.100.12 ping statistics --- 2 packets transmitted, 2 received, 0% packet loss... $ ping HpPrinter.local PING HpPrinter.local (192.168.100.12) 56(84) bytes of data. 64 bytes from HpPrinter.local (192.168.100.12): icmp_req=1 ttl=255 time=0.383 ms --- HpPrinter.local ping statistics --- 4 packets transmitted, 4 received, 0% packet loss... But here's the error when I try to print while connected to the VPN: hpijs[9990]: io/hpmud/jd.c 784: mdns lookup HpPrinter.local retry 1... ... hpijs[9990]: io/hpmud/jd.c 784: mdns lookup HpPrinter.local retry 20... hpijs[9990]: io/hpmud/jd.c 780: error timeout mdns lookup HpPrinter.local hpijs[9990]: io/hpmud/jd.c 88: unable to read device-id hp[9982]: io/hpmud/jd.c 784: mdns lookup HpPrinter.local retry 1... ... hp[9982]: io/hpmud/jd.c 784: mdns lookup HpPrinter.local retry 20... hp[9982]: io/hpmud/jd.c 780: error timeout mdns lookup HpPrinter.local hp[9982]: io/hpmud/jd.c 88: unable to read device-id hp[9982]: prnt/backend/hp.c 745: ERROR: open device failed stat=12: hp:/net/Officejet_Pro_L7600?zc=HpPrinter I am running iptables rules, but the problem doesn't appear related to the firewall. I've tested with no rules (i.e., no firewall). The printing problem happens when the VPN is connected. I can guess it is an mdns problem, but searching google about mdns didn't turn up anything that seemed related to this (at my level of knowledge). Any suggestions?

  Read the article

• Hard drive spark, can it be recovered?

  - by user163558

  Alright, so I was going to install Source Film Maker but I didn't have any space, so I decided to connect an HDD via an USB converter(image below). I shut down the machine, turned the PSU off, and connected via a Molex connector & the USB converter. I turned back on the PSU, no sparks or anything, everything normal, but when I turned on the machine, I heard some sizzing(lol?) and sparks flying and a little flame, but the PC was running fine. I pressed the power button instead pulling out the plug (I panicked) so it continued to short circuit for about 10 seconds. There's a very little part on the HDD that become ash, it's near the Molex connector and the circuit is a little black as well. I'm afraid that I will damage the HDD more so I didn't hook up the HDD after all. Do you think it's the PSU(came default with Cooler Master Elite 430, 500W) or it's the HDD(Samsung SP1203N)? P.S: I've attached the HDD same way before(like 3 months ago), and it worked. HDD burn: USB connector: Sorry for the bad image quality, taken with my phone.

  Read the article

• When modern computers boot, what initial setup of RAM do they execute, and how does it exactly work?

  - by user272840

  I know the title reeks of confusion, and some of you might assume I am just wondering about how the computer boots in general, but I'm not. But I'll sort this out for you people now: 1.Onboard firmware is how mostly all modern computer devices work, whether or not with EFI/UEFI(even without "onboard firmware", older computers still employed bank switching, or similar methods with snap-in firmware, cartridges, etc.) 2.On startup there is no "programs" running in the traditional sense yet, i.e. no kernel, OS, user-applications; all of the instructions, especially the very first instruction, is specified by the Instruction Pointer, I am guessing. How is the IP/PC/etc. set to first point to an address for a BIOS/firmware/etc. instruction, and how do the BIOS instructions map themself out in memory prior to startup? 3.Aside from MMIO, BIOS uses certain RAM addresses to have instructions. The big ? comes in when I ask this ... how does BIOS do this? Conclusion: I am assuming that with the very first instruction there is an initial hardware setup for BIOS prior to complete OS bootup. What I want to know is if it's hardware engineered to always work this way, if there's another step in this bootup method I am missing, a gap of information I am unaware of, or how this all works from the very first instruction, and the RAM data itself.

  Read the article

< Previous Page | 300 301 302 303 304 305 306 307 308 309 310 311  | Next Page >