Search Results

Search found 40212 results on 1609 pages for 'hardware id'.

Page 305/1609 | < Previous Page | 301 302 303 304 305 306 307 308 309 310 311 312  | Next Page >

  • how can i bridge my LAN port to batman-adv?

    - by rubo77
    On Ubuntu 12.04 I have my Laptop connected to and part of a batman network. So my Laptop is meshing with the net. The script I used is this How can I install a bridge, that will allow another host laptop to get internet through my Laptop? I tried this: service network-manager stop batctl if add eth0 apt-get install bridge-utils I added this in /etc/network/interfaces auto br0 iface br0 inet static address 10.116.123.123 bridge_ports eth0 bridge_fd 5 bridge_stp no then ifconfig sais br0 Link encap:Ethernet Hardware Adresse 00:a0:d1:a9:db:da rubo78: inet Adresse:10.116.123.123 Bcast:0.0.0.0 Maske:255.255.255.255 bat0 Link encap:Ethernet Hardware Adresse 6e:8a:8f:f2:82:e3 inet Adresse:10.116.2.250 Bcast:10.116.255.255 Maske:255.255.0.0 ifup br0 batctl if eth0: active wlan0: active but I get no network on the host

    Read the article

  • Why lock statements don't scale

    - by Alex.Davies
    We are going to have to stop using lock statements one day. Just like we had to stop using goto statements. The problem is similar, they're pretty easy to follow in small programs, but code with locks isn't composable. That means that small pieces of program that work in isolation can't necessarily be put together and work together. Of course actors scale fine :) Why lock statements don't scale as software gets bigger Deadlocks. You have a program with lots of threads picking up lots of locks. You already know that if two of your threads both try to pick up a lock that the other already has, they will deadlock. Your program will come to a grinding halt, and there will be fire and brimstone. "Easy!" you say, "Just make sure all the threads pick up the locks in the same order." Yes, that works. But you've broken composability. Now, to add a new lock to your code, you have to consider all the other locks already in your code and check that they are taken in the right order. Algorithm buffs will have noticed this approach means it takes quadratic time to write a program. That's bad. Why lock statements don't scale as hardware gets bigger Memory bus contention There's another headache, one that most programmers don't usually need to think about, but is going to bite us in a big way in a few years. Locking needs exclusive use of the entire system's memory bus while taking out the lock. That's not too bad for a single or dual-core system, but already for quad-core systems it's a pretty large overhead. Have a look at this blog about the .NET 4 ThreadPool for some numbers and a weird analogy (see the author's comment). Not too bad yet, but I'm scared my 1000 core machine of the future is going to go slower than my machine today! I don't know the answer to this problem yet. Maybe some kind of per-core work queue system with hierarchical work stealing. Definitely hardware support. But what I do know is that using locks specifically prevents any solution to this. We should be abstracting our code away from the details of locks as soon as possible, so we can swap in whatever solution arrives when it does. NAct uses locks at the moment. But my advice is that you code using actors (which do scale well as software gets bigger). And when there's a better way of implementing actors that'll scale well as hardware gets bigger, only NAct needs to work out how to use it, and your program will go fast on it's own.

    Read the article

  • URL good practice for category sub category?

    - by Seting
    I have developed a application and I need to work for SEO-friendly URL. I have following URL structure: http://localhost:3000/posts/product/testing-with-slug-url-2 and http://localhost:3000/posts/product/testing-with-slug-url-2-4-23 Is this a good practice? If not how can I rewrite it? Ok Ill explain about my applicaiton. My application is based on shopping. if a customer searched for mobiles. it will redirect to url like this http://mydomain.com/cat/mobile-3 3 in the url indicates my database id it is used for further searching After the user reached the mobile page he may need to filter for some brand eg. nokia so my url look lik http://mydomain.com/subcat/nokia-3-2 The integer at the end refers to 3 category id and 2 the brand id My doubt is whether the integer at the end of the url will affect seo ranking.

    Read the article

  • Separate shaders from HTML file in WebGL

    - by Chris Smith
    I'm ramping up on WebGL and was wondering what is the best way to specify my vertex and fragment shaders. Looking at some tutorials, the shaders are embedded directly in the HTML. (And referenced via an ID.) For example: <script id="shader_1-fs" type="x-shader/x-fragment"> precision highp float; void main(void) { // ... } </script> <script id="shader_1-vs" type="x-shader/x-vertex"> attribute vec3 aVertexPosition; uniform mat4 uMVMatrix; // ... My question is, is it possible to have my shaders referenced in a separate file? (Ideally as plain text.) I presume this is straight forward in JavaScript. Is there essentially a way to do this: var shaderText = LoadRemoteFileOnSever('/shaders/shader_1.txt');

    Read the article

  • Google Analytics - Unable to get GA Tracking

    - by Pure.Krome
    We've been using GA for a few years with no probs. About 2-3 weeks ago we tried to clean up some of our tracking and on one of our profiles, it's not working anymore (since oct 10.) First, some context then some GA Debugging code. 1. Context. We have the following setup: different root domains AND different sub-domains on one of the root domains. www.website.com www.website.com.au www.anotherWebsite.com foo.website.com baa.website.com So what we're doing is the following: each root domain and each sub-domain get their own tracking code. This way we can allow separate people (from outside our company) to access only their own data. Eg. a manager for foo.website.com can only see data related to that domain .. and see data on the other domains. Have a last account which is the SUM of all the domains. this is for us. so we can see total numbers. So to do this, we have two trackers that fire off, on the page. the individual accounts all work fine - they seem to be tracking data ok. the 'global' account is not working and this gives us the = Tracking Not Installed error. This has been going on since oct 10. So the wait 24/48/72 hours thing is waaaaay over. 2. GA Debug code. Installing GA Debug chrome extension gives the following output. I've tried to hide anything that could be considered secret. UA-XXXXX34-1 == Global account (which isn't working any more). UA-XXXXX34-11 == Specific account for www.website.com _gaq.push processing "_setAccount" for args: "[UA-XXXXX34-1]": ga_debug.js:18 _gaq.push processing "_setDomainName" for args: "[website.com]": ga_debug.js:18 _gaq.push processing "_setAllowLinker" for args: "[true]": ga_debug.js:18 _gaq.push processing "_trackPageview" for args: "[]": ga_debug.js:18 Track Pageview ga_debug.js:18 Tracking beacon sent! utmwv=--snipped-- Account ID : UA-XXXX234-1 Page Title : Some page title Host Name : www.website.com Page : / Referring URL : - Hit ID : 1923583969 Visitor ID : 785310647 Session Count : 51 Session Time - First : Thu Aug 23 2012 15:20:17 GMT 1000 (AUS Eastern Standard Time) Session Time - Last : Mon Oct 29 2012 11:41:46 GMT 1100 (AUS Eastern Summer Time) Session Time - Current : Mon Oct 29 2012 12:19:23 GMT 1100 (AUS Eastern Summer Time) Campaign Time : Thu Aug 23 2012 15:20:17 GMT 1000 (AUS Eastern Standard Time) Campaign Session : 1 Campaign Count : 1 Campaign Source : (direct) Campaign Medium : (none); Campaign Name : (direct) Language : en-gb Encoding : UTF-8 Flash Version : 11.4 r31 Java Enabled : true Screen Resolution : 1050x1680 Browser Size : 1033x861 Color Depth : 32-bit Ga.js Version : 5.3.7d Cachebuster : 1846514973 ga_debug.js:18 _gaq.push processing "_setAccount" for args: "[UA-XXXX234-11]": ga_debug.js:18 _gaq.push processing "_setDomainName" for args: "[website.com]": ga_debug.js:18 _gaq.push processing "_setAllowLinker" for args: "[true]": ga_debug.js:18 _gaq.push processing "_trackPageview" for args: "[]": ga_debug.js:18 Track Pageview ga_debug.js:18 Tracking beacon sent! utmwv=--snipped-- Account ID : UA-XXXX234-11 Page Title : SomePageTitle Host Name : www.website.com Page : / Referring URL : - Hit ID : 1923583969 Visitor ID : 785310647 Session Count : 51 Session Time - First : Thu Aug 23 2012 15:20:17 GMT 1000 (AUS Eastern Standard Time) Session Time - Last : Mon Oct 29 2012 11:41:46 GMT 1100 (AUS Eastern Summer Time) Session Time - Current : Mon Oct 29 2012 12:19:23 GMT 1100 (AUS Eastern Summer Time) Campaign Time : Thu Aug 23 2012 15:20:17 GMT 1000 (AUS Eastern Standard Time) Campaign Session : 1 Campaign Count : 1 Campaign Source : (direct) Campaign Medium : (none); Campaign Name : (direct) Language : en-gb Encoding : UTF-8 Flash Version : 11.4 r31 Java Enabled : true Screen Resolution : 1050x1680 Browser Size : 1033x861 Color Depth : 32-bit Ga.js Version : 5.3.7d Cachebuster : 1580443754 and this is the js code he have. BTW, it is inside a <head></head> <script type="text/javascript"> var _gaq = _gaq || []; _gaq.push( ['_setAccount', 'UA-XXXX234-1'], ['_setDomainName', 'website.com'], ['_setAllowLinker', true], ['_trackPageview'] ,['b._setAccount','UA-XXXX234-11'], ['b._setDomainName','website.com'], ['b._setAllowLinker',true], ['b._trackPageview'] ); (function () { var ga = document.createElement('script'); ga.type = 'text/javascript'; ga.async = true; ga.src = ('https:' == document.location.protocol ? 'https://ssl' : 'http://www') + '.google-analytics.com/ga.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(ga, s); })(); </script> Finally, I've triple checked that the UA is the correct text. and yes, the global account is -1 and the specific domain is -11. Anyone have any suggestions to help?

    Read the article

  • Single IBAction for multiple UIButtons versus single IBAction for single UIButton

    - by Miraaj
    While using story-board there are two different approaches which my team mates follow: Approach 1: To bind unique action with each button, ie: Done button - binded to - doneButtonAction Cancel button - binded to - cancelButtonAction OR Approach 2: To bind single action to multiple buttons, ie: Done button - binded to - commonButtonAction Cancel button - binded to - commonButtonAction Then in commonButtonAction they prefer to use switch case like this: - (IBAction)commonButtonAction:(id)sender { UIButton *button = (UIButton *)sender; switch (button.tag) { case 201: // done button [self doneButtonAction:sender]; break; case 202: // cancel button [self cancelButtonAction:sender]; break; default: break; } } - (void)cancelButtonAction:(id)sender { // no interesting stuff, simple dismiss of view :-( } - (void)doneButtonAction:(id)sender { // some interesting stuff ;-) } Reasoning which they give to follow approach 2 is - in each view controller during code walk through anyone can easily identify where to find code related to button actions. While others discard this idea because they say that adding an extra switch case is unnecessary and is not a common practice. What are your views?

    Read the article

  • mysql join with multiple values in one column

    - by CYREX
    I need to make a query that creates 3 columns that come from 2 tables which have the following relations: TABLE 1 has Column ID that relates to TABLE 2 with column ID2 In TABLE 1 there is a column called user In TABLE 2 there is a column called names There can be 1 unique user but there can be many names associated to that user. If i do the following i get all data BUT the user column repeats itself for each name it has associated. What i want is for use to appear unique but the names columns appear with all the names associated to the user column but separated by commas, like the following: select user,names from TABLE1 left join TABLE2 on TABLE1.id = TABLE2.id This will show the users repeated everytime a name appears for that user. what i want is to appear like this: USER - NAMES cyrex - pedrox, rambo, zelda homeboy - carmen, carlos, tom, sandra jerry - seinfeld, christine ninja - soloboy etc....

    Read the article

  • How do you upgrade/remove a side-by-side installation?

    - by d3vid
    I've hit some snags in the last two upgrades (which I've been able to resolve with time, patience and AskUbuntu :) so come 12.04 I'm considering a side-by-side installation. Perhaps even installing a pre-release before that (because virtual machine testing can't reveal hardware-related issues). So, let's say I installed a side-by-side version. As far as I can tell this splits my existing partition and installs a brand new Ubuntu on partition 2. If all goes well, there are no hardware issues, and my favorite apps seem to be working, how do I switch to a one-sided installation? If I can't, how do I do a side-by-side installation the next time? (And, am I crazy to consider using a pre-release version to do a side-by-side installation?)

    Read the article

  • Multiple problems while installing Ubuntu 13.04 on LENOVO G500 laptop

    - by Balazs Kiss
    Dear Community, I encountered several problems when installing Ubuntu on my new Lenovo G500 laptop. First I bumped in the problem (also reported by many other) of the black screen after booting Ubuntu. This problem I recould solve by changing the "quiet splash" record of GRUB to "nomodeset". Ubuntu install was successful then. After the installation, I had a black screen again when booting up for the first time. I booted up again with "nomodeset", and enabled the external AMD driver at Hardware Drivers. Booting still do not worked (only with nomodeset), and when I log in, the system gives me a "System program problem detected" message, and the system (desktop) does not load in. Please, can you advise me what to do? Shall I re-install Ubuntu? What are the steps to make my ubuntu work with this harver? Hardware: LENOVO G500 with IntelCore i5-3230M 3,2Ghz processor and AMD Radeon HD8570 integrated chip Thank you for your help in advance!

    Read the article

  • TFS 2012 Upgrade and SQL Server - SharePoint - OS Requirements.

    - by Vishal
    Hello folks,Recently I was involved in Installation and Configuration of Team Foundation Server 2010 Farm for a client. A month after the installation and configuration was done and everything was working as it was supposed to, Microsoft released Team Foundation Server 2012 in mid August 2012. Well the company was using Borland Starteam as their source control and once starting to use TFS 2010, their developers and project managers were loving it since TFS is not just a source control tool and way much better then StarTeam. Anyways, long story short, they are now interested in thinking of upgrading to the newest version. Below are some basic Hardware and Software requirements for TFS 2012:Operating System:Windows Server 2008 with SP2 (only 64bit)Windows Server 2008 R2 with SP1 (only 64bit)Windows Server 2012 (only 64bit)SQL Server:SQL Server 2008 R2 and SQL Server 2012SQL Server 2008 is no longer supported.SQL Server Requirements for TFS.SharePoint Products:SharePoint Server 2010. (SharePoint Foundation 2010, Standard, Enterprise).MOSS 2007 (Standard, Enterprise)Windows SharePoint Services 3.0 (WSS 3.0)SharePoint Products Requirements for TFS.Project Server:Project Server 2010 with SP1.Project Server 2007 with SP2.Project Server Requirements for TFS.More information onf TFS Upgrade Requirements can be found here. Hardware Recommendations can be found here.Thanks,Vishal Mody

    Read the article

  • Monogame - Input secuence game (Scripting?)

    - by user2662567
    I'm starting to program my very first game, it's a clone of DDR/Stepmania done for research purposes and learning. I (at this early stage) get most of the UI/Music/input work that should be done, but what i still can't grasp is scripting, i've read about Lua and that you shouldn't use it with XNA/Monogame as C# is capable enough, but i cannot get the utility of it. Assuming the needs of my game, ¿What would be the ideal way to implement the input secuences it needs?, i thought of XML/Json, let's say Stage 1 <game> <level id="1"> <step id="1" key="up" time="00:00:01"/> <step id="2" key="left" time="00:00:02"/> </level> </game> Is that a correct implementation? or are there better ways with more benefits?

    Read the article

  • Getting Current Native Thread

    - by Ricardo Peres
    The native OS threads running in the current process are exposed through the Threads property of the Process class. Please note that this is not the same as a managed thread, these are the actual native threads running on the operating system. In order to get a pointer to the current executing thread, we must use P/Invoke. Here's how we do it: [DllImport("kernel32.dll")] public static extern UInt32 GetCurrentThreadId(); UInt32 id = GetCurrentThreadId(); ProcessThread thread = Process.GetCurrentProcess().Threads.Cast().Where(t = t.Id == id).Single(); SyntaxHighlighter.config.clipboardSwf = 'http://alexgorbatchev.com/pub/sh/2.0.320/scripts/clipboard.swf'; SyntaxHighlighter.brushes.CSharp.aliases = ['c#', 'c-sharp', 'csharp']; SyntaxHighlighter.all();

    Read the article

  • Webcast: Applications Integration Architecture

    - by LuciaC
    Webcast: Applications Integration Architecture - Overview and Best Practices Date:  November 12, 2013.Join us for an Overview and Best Practices live webcast on Applications Integration Architecture (AIA). We are covering following topics in this Webcast : AIA Overview AIA - Where it Stands Pre-Install, Pre-Upgrade Concerns Understanding Dependency Certification Matrix Documentation Information Center Demonstration - How to evaluate certified combination Software Download/Installable Demonstration - edelivery Download Overview Reference Information Q & A (15 Minutes)  We will be holding 2 separate sessions to accommodate different timezones: EMEA / APAC - timezone Session : Tuesday, 12-NOV-2013 at 09:00 UK / 10:00 CET / 14:30 India / 18:00 Japan / 20:00 AEDT Details & Registration : Doc ID 1590146.1 Direct registration link USA - timezone Session : Wednesday, 13-NOV-2013 at 18:00 UK / 19:00 CET / 10:00 PST / 11:00 MST / 13:00 EST Details & Registration : Doc ID 1590147.1 Direct registration link If you have any question about the schedules or if you have a suggestion for an Advisor Webcast to be planned in future, please send an E-Mail to Ruediger Ziegler. Remember that you can access a full listing of all future webcasts as well as replays from Doc ID 740966.1.

    Read the article

  • Select comma separated result from via comma separated parameter

    - by Rodney Vinyard
    Select comma separated result from via comma separated parameter PROCEDURE [dbo].[GetCommaSepStringsByCommaSepNumericIds] (@CommaSepNumericIds varchar(max))   AS   BEGIN   /* exec GetCommaSepStringsByCommaSepNumericIds '1xx1, 1xx2, 1xx3' */ DECLARE @returnCommaSepIds varchar(max); with cte as ( select distinct Left(qc.myString, 1) + '-' + substring(qc.myString, 2, 9) + '-' + substring(qc.myString, 11, 7) as myString from q_CoaRequestCompound qc               JOIN               dbo.SplitStringToNumberTable(@CommaSepNumericIds) AS s               ON               qc.q_CoaRequestId = s.ID where SUBSTRING(upper(myString), 1, 1) in('L', '?') ) SELECT @returnCommaSepIds = COALESCE(@returnCommaSepIds + ''',''', '''') + CAST(myString AS varchar(2x)) FROM cte;   set @returnCommaSepIds = @returnCommaSepIds + '''' SELECT @returnCommaSepIds   End   FUNCTION [dbo].[SplitStringToNumberTable] (        @commaSeparatedList varchar(max) ) RETURNS @outTable table (        ID int ) AS BEGIN        DECLARE @parsedItem varchar(10), @Pos int          SET @commaSeparatedList = LTRIM(RTRIM(@commaSeparatedList))+ ','        SET @commaSeparatedList = REPLACE(@commaSeparatedList, ' ', '')        SET @Pos = CHARINDEX(',', @commaSeparatedList, 1)          IF REPLACE(@commaSeparatedList, ',', '') <> ''        BEGIN               WHILE @Pos > 0               BEGIN                      SET @parsedItem = LTRIM(RTRIM(LEFT(@commaSeparatedList, @Pos - 1)))                      IF @parsedItem <> ''                            BEGIN                                   INSERT INTO @outTable(ID)                                   VALUES (CAST(@parsedItem AS int)) --Use Appropriate conversion                            END                            SET @commaSeparatedList = RIGHT(@commaSeparatedList, LEN(@commaSeparatedList) - @Pos)                            SET @Pos = CHARINDEX(',', @commaSeparatedList, 1)               END        END           RETURN END

    Read the article

  • How do I configure sound with PulseAudio and Multiseat?

    - by Anthony
    In the spirit of full disclosure, i just posted this question to the ubuntu forums, but i figure more heads working on it couldn't hurt. I have a multi-seat setup working quite well. Hot plugging input devices works as expected and such. The only issue I am still not able to resolve is getting the audio for each seat. Here is a summary of my attempts at getting audio to work: Make ~/.pulse/default.pa dynamically configured based on which $DISPLAY the user logs in at. See this pastebin for the details. Load pulseaudio as a system-wide instance. Couldn't get this to work. None of the audio hardware was accessible to the users. Use udev rules to mark seats in ConsoleKit. Following udev guidelines found here: http://www.freedesktop.org/wiki/Software/systemd/multiseat I didn't think this would work, although it was "guaranteed" to work by someone in irc.freenode #pulseaudio None of those attempts yielded success, which is why I now turn to the community for help. It is quite possible that the suggested methods work and I just messed some aspect of it up, idk. This is the last piece of the puzzle which is needed before I can go and update the MultiseatX page to include instructions for Ubuntu 12.04. My understandings on the situation: Access to pulseaudio is restricted to the active session as marked by ConsoleKit (something about an ACL). CK can only mark one session as active at a time. This simple little fact of life leads me to believe that the solution should involve pulseaudio being run as a system-wide instance. Each user should connect to the pulse server and be limited to a subset of all the hardware. Maybe each user connects to the pulse server via localhost, idk. I do know that regardless of my attempts and their failed results, I was always able to use sudo aplay -D plughw:0,0 /usr/share/sounds/alsa/Front_Center.wav to play something to any of the hardware. I'm grasping at straws and am now down to the last few hairs i can pull out of my head. Please, help me figure this out so we can share the wealth. Any additional information needed will be provided at your request.

    Read the article

  • How to Quickly Check If Your Computer Can Run a PC Game

    - by Chris Hoffman
    PC gaming isn’t quite as simple as console gaming. If you have a laptop with weak graphics hardware or an older PC, it’s important to check whether your computer can support a game before you spend your hard-earned cash. Gamers don’t have to upgrade their hardware as often as they used to. Even a gaming PC built years ago should be able to handle the newest games just fine. Laptops not build for gaming and older PCs are a different matter.    

    Read the article

  • Volume widget issue with sound card hotplugging

    - by jpic
    When plugging a USB sound card may sometimes cause the current audio output (ie. Banshee and PC speakers) to switch immediately. But the volume controls (sound widget in systray, volume keyboard keys) are stuck on the old sound card. Plug a soundcard and amplifier while the volume is set to ultra high for the pc speakers. You can't control the volume without opening the sound settings or alsamixer. This could probably cause neighbour disturbance in some countries. You can't control it with the sound widget of the systray nor the volume keyboard keys. How to disable auto switch of hardware audio output, or enable auto switch of software volume controls ? It would be great to make the software behaviour consistent with the hardware's. Ubuntu 11.10 vanilla up to date.

    Read the article

  • Need Help Unable to Mount Location

    - by Don't ASk Ubun
    I am not able to start Windows and am using a DVD copy of Ubuntu to start up. I see my 750 GB Hard Disk, but if I click it i get this error: Error mounting: mount exited with exit code 13: ntfs_attr_pread_i: ntfs_pread failed: Input/output error Failed to read NTFS $Bitmap: Input/output error NTFS is either inconsistent, or there is a hardware fault, or it's a SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows then reboot into Windows twice. The usage of the /f parameter is very important! If the device is a SoftRAID/FakeRAID then first activate it and mount a different device under the /dev/mapper/ directory, (e.g. /dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation for more details. After googling for a while I think I need to do sudo apt-get install ntfsprogs but when I try that: E: Package 'ntfsprogs' has no installation candidate My problem is a lot like this thread

    Read the article

  • Build 2012, some thoughts..

    - by Dennis Vroegop
    I think you probably read my rant about the logistics at Build 2012, as posted here, so I am not going into that anymore. Instead, let’s look at the content. (BTW If you did read that post and want some more info then read Nia Angelina’s post about Build. I have nothing to add to that.) As usual, there were good speakers and some speakers who could benefit from some speaker training. I find it hard to understand why Microsoft allows certain people on stage, people who speak English with such strong accents it’s hard for people, especially from abroad, to understand. Some basic training might be useful for some of them. However, it is nice to see that most speakers are project managers, program managers or even devs on the teams that build the stuff they talk about: there was a lot of knowledge on stage! And that means when you ask questions you get very relevant information. I realize I am not the average audience member here, I am regular speaker myself so I tend to look for other things when I am in a room than most audience members so my opinion might differ from others. All in all the knowledge of the speakers was above average but the presentation skills were most of the times below what I would describe as adequate. But let us look at the contents. Since the official name of the conference is Build Windows 2012 it is not surprising most of the talks were focused on building Windows 8 apps. Next to that, there was a lot of focus on Azure and of course Windows Phone 8 that launched the day before Build started. Most sessions dealt with C# and JavaScript although I did see a tendency to use C++ more. Touch. Well, that was the focus on a lot of sessions, that goes without saying. Microsoft is really betting on Touch these days and being a Touch oriented developer I can only applaud this. The term NUI is getting a bit outdated but the principles behind it certainly aren’t. The sessions did cover quite a lot on how to make your applications easy to use and easy to understand. However, not all is touch nowadays; still the majority of people use keyboard and mouse to interact with their machines (or, as I do, use keyboard, mouse AND touch at the same time). Microsoft understands this and has spend some serious thoughts on this as well. It was all about making your apps run everywhere on all sorts of devices and in all sorts of scenarios. I have seen a couple of sessions focusing on the portable class library and on sharing code between Windows 8 and Windows Phone 8. You get the feeling Microsoft is enabling us devs to write software that will be ubiquitous. They want your stuff to be all over the place and they do anything they can to help. To achieve that goal they provide us with brilliant SDK’s, great tooling, a very, very good backend in the form of Windows Azure (I was particularly impressed by the Mobility part of Azure) and some fantastic hardware. And speaking of hardware: the partners such as Acer, Lenovo and Dell are making hardware that puts Apple to a shame nowadays. To illustrate: in Bellevue (very close to Redmond where Microsoft HQ is) they have the Microsoft Store located very close to the Apple Store, so it’s easy to compare devices. And I have to say: the Microsoft offerings are much, much more appealing that what the Cupertino guys have to offer. That was very visible by the number of people visiting the stores: even on the day that Apple launched the iPad Mini there were more people in the Microsoft store than in the Apple store. So, the future looks like it’s going to be fun. Great hardware (did I mention the Nokia Lumia 920? No? It’s brilliant), great software (Windows 8 is in a league of its own), the best dev tools (Visual Studio 2012 is still the champion here) and a fantastic backend (Azure.. need I say more?). It’s up to us devs to fill up the stores with applications that matches this. To summarize: it is great to be a Windows developer. PS. Did I mention Surface RT? Man….. People were drooling all over it wherever I went. It is fantastic :-) Technorati Tags: Build,Windows 8,Windows Phone,Lumia,Surface,Microsoft

    Read the article

  • HP Pavilion tx2000 - Wifi adapter no longer works after moving from 12.04 to a 12.10 clean install

    - by Marek L.
    I have a HP Pavilion tx2000 that I have been running Ubuntu 12.04 on for a couple of months without any problems (wifi worked great) until yesterday when my hard drive failed. I replaced the hard drive and decided to install Ubuntu 12.10. Unlike 12.04, the wifi did not work after the installation finished and all the updates where installed (over Ethernet). The network drop down in the top right didn't even show a wireless option. I Googled about for a bit and found some solutions that seemed like they might work. Unfortunately they did not. Here is what I tried: sudo apt-get remove bcmwl-kernel-source sudo apt-get install b43-fwcutter sudo apt-get install firmware-b43-lpphy-installer Restart the computer. And the wifi still didn't work. At which point I panicked a bit and tried to undo the previous commands by running: sudo apt-get remove b43-fwcutter firmware-b43-lpphy-installer sudo apt-get install bcmwl-kernel-source Restart the computer. The wifi still doesn't work. This is where I stopped because I have no idea what I am doing and don't want to mess something up. The network drop down still doesn't show a wireless option and the hardware wifi switch on the laptop is amber (it turns blue when the wifi is on). Using the hardware switch does not change the color. Output from: sudo lspci ... 08:00.0 Network controller: Broadcom Corporation BCM4322 802.11a/b/g/n Wireless LAN Controller (rev 01) ... Output from: sudo lshw -class network *-network UNCLAIMED description: Network controller product: BCM4322 802.11a/b/g/n Wireless LAN Controller vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:08:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:d1100000-d1103fff ... Output from: sudo rfkill list all 0: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: yes UPDATE: After writing up this question tried the following command: sudo rfkill unblock all At first it didn't do anything but after running it about four times, sudo rfkill list all now returns: 0: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: no But the network menu still does not have a wireless option and the hardware switch still glows amber. Pushing the hardware switch turns the hard block back on and I have to run sudo rfkill unblock all multiple times again to turn it off. Any help is appreciated! Update 2: Full output from sudo lspci -nn: 00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] RS780 Host Bridge [1022:9600] 00:01.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (int gfx) [1022:9602] 00:04.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 0) [1022:9604] 00:05.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 1) [1022:9605] 00:06.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2) [1022:9606] 00:11.0 SATA controller [0106]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1002:4391] 00:12.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] 00:12.1 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0 USB OHCI1 Controller [1002:4398] 00:12.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] 00:13.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] 00:13.1 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0 USB OHCI1 Controller [1002:4398] 00:13.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] 00:14.0 SMBus [0c05]: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller [1002:4385] (rev 3a) 00:14.1 IDE interface [0101]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 IDE Controller [1002:439c] 00:14.2 Audio device [0403]: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) [1002:4383] 00:14.3 ISA bridge [0601]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d] 00:14.4 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge [1002:4384] 00:14.5 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI2 Controller [1002:4399] 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Processor HyperTransport Configuration [1022:1300] (rev 40) 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Processor Address Map [1022:1301] 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Processor DRAM Controller [1022:1302] 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Processor Miscellaneous Control [1022:1303] 00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Processor Link Control [1022:1304] 01:05.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI RS780M/RS780MN [Mobility Radeon HD 3200 Graphics] [1002:9612] 08:00.0 Network controller [0280]: Broadcom Corporation BCM4322 802.11a/b/g/n Wireless LAN Controller [14e4:432b] (rev 01) 09:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 02)

    Read the article

  • Speaking at AMD Fusion conference

    - by Daniel Moth
    Next Wednesday at 2pm I will be presenting a session at the AMD Fusion developer summit in Bellevue, Washington State. For more on this conference please visit the official website. If you filter the catalog by 'Speaker Last Name' to "Moth", you'll find my talk. For your convenience, below is the title and abstract Blazing-fast code using GPUs and more, with Microsoft Visual C++ To get full performance out of mainstream hardware, high-performance code needs to harness, not only multi-core CPUs, but also GPUs (whether discrete cards or integrated in the processor) and other compute accelerators to achieve orders-of-magnitude speed-up for data parallel algorithms. How can you as a C++ developer fully utilize all that heterogeneous hardware from your Visual Studio environment? How can your code benefit from this tremendous performance boost without sacrificing your developer productivity or the portability of your solution? The answers will be presented in this session that introduces a new technology from Microsoft. Hope to see many of you there! Comments about this post welcome at the original blog.

    Read the article

  • Broadcom BCM4313 wireless slow and high-latency

    - by Florin Andrei
    Ubuntu 12.10 64 bit on a Dell Latitude E6330 laptop. Wireless is pretty slow. It gets connected quick enough, but then it acts like a dialup connection. My ssh sessions over WiFi are slow and laggy. Even browsing is slow, the pages are loading like it's 1998. This does not depend on the access point, it's the same both at home and at work. Other systems work fine on these access points. I had an older Dell laptop before, different WiFi hardware, and it was much faster over the same wireless access points. Is this a known issue with this hardware? If so, any solutions?

    Read the article

< Previous Page | 301 302 303 304 305 306 307 308 309 310 311 312  | Next Page >