Search Results

Search found 11516 results on 461 pages for 'mobile views'.

Page 305/461 | < Previous Page | 301 302 303 304 305 306 307 308 309 310 311 312  | Next Page >

  • VMware vSphere 4.1: host performance graphs show "No data available", except the realtime view, which works fine

    - by Graeme Donaldson
    Here's our scenario: Site 1 has 3 hosts, and our vCenter server is here. Site 2 has 3 hosts. All hosts are ESXi 4.1 update 1. If I view the Performance tab for any host in Site 1, I can view realtime, 1 Day, etc., i.e. all the views give me graph data. For the hosts in Site 2, I can view the realtime graphs, 1 Day and 1 Week both say "No data available". 1 Month had mostly nothing, 1 Year shows that it was working fine for a long time and then started breaking. 1 Month view: 1 Year view: What would cause this loss of performance data?

    Read the article

  • Which is generally considered faster or best practice: symlinks or Apache aliases?

    - by Christopher W. Allen-Poole
    I'm curious as to what most people's views are on this subject. Personally, I will almost always prefer symlinks unless I have no other option -- I find that it is far more obvious when someone is navigating the file system, but, on the other hand aliasing is more platform independent. Windows XP, for example, doesn't have anything remotely comparable to symlinks (NTFS junctions are not interpreted correctly by at least some environments), which means that anything which relies on symlinks in a *nix based system cannot be transferred. (I know that Windows 64x OS's have symlinks, but I've not seen if they can be read correctly by the environments previously mentioned) In addition to this, I was also wondering which is considered faster. Is this even possible to know? Do you have a conjecture? I would imagine that since symlinks are generally more low-level than Apache it would make sense that they would be referenced faster, but, on the other hand, I would guess that Apache is required to do a lookup in either case so it would be disk read dependent.

    Read the article

  • MySQL on a laptop for remote workers - MyISAM keeps corrupting

    - by Jonathon
    We have an application that is used by remote, mobile workers. It intalls WAMP (Server2Go) on a laptop and uses MySQL to store data locally. All tables are MyISAM. Once a day, the workers sync the database to our central server via HTTP scripts that query the data and post it to our site. The problem is that many of these laptop database tables are corrupting continually. It appears that MySQL acts like it saves the information (I don't get any query errors), but the table gets corrupt. I have to repair the table constantly (which removes several rows of data in the process). Does anyone have any ideas about how to work around this problem? Would it be wise to switch to InnoDB on the laptops? How about a different database system altogether. I have looked at MySQL Embedded, but it appears to be the same engine as the regular MySQL.

    Read the article

  • how to connect public web server to internal LAN

    - by DefSol
    I have a VPS which is my public web server for all my clients. It's running server 2008 and I would like to have it connect via secure connection to my internal LAN. I would like this to be a route so access is bi-derectional. Have read about Server & Domain isolation, but am concerned this may prevent public views to the webs sites on the server. I currently have a PPTP tunnel, but I'm wanting better security (IPSec or SSL etc) and it's not given my bi derectional access. (In fact my backups aren't copying accross but this could be an acl issue) The goal is to provide easy/automated backups of data & sql db's to my internal LAN, as well as a means to provision new sites & db's from a workflow occuring internally. Internal lan is windows based with ISA 2006 at the perimeter. Thanks

    Read the article

  • FTP error 424 failed to establish connection

    - by cKK
    Getting "ftp error 425 failed to establish connection" when trying to connect to ftp server. Tried 2 ftp clients on 3 machines on same network and none work. However FTP works from home / mobile broadband. No ip blocks on ftp sever. Other ftp servers(differrent ip/hosts) work okay. firewall setup correct, no ports blocked. Is it possible to use a proxy for ftp a i think it's something with the ISP but taking too long to fix?

    Read the article

  • Windows Media Player 11 Not Detecting Autoplaylists

    - by tuna
    Every time I open Windows Media Player it fails to detect my autoplaylists stored in <my music library dir>\Playlists. This appears to lead to sync problems since I (exclusively) use autoplaylists to sync music to my mobile. As WMP 11 fails to find the any sync autoplaylists it infuriatingly seems to decide that I want no music at all on my phone and proceeds to delete all my music off my phone. I guess these are two seperate problems but it seems to me they are related. If anyone can shed any light on a fix, that would be much appreciated. Many thanks

    Read the article

  • Is it possible to control my CPU frequency?

    - by Tim
    My laptop's CPU Type is: Mobile AMD Turion 64 ML-30, 1600 MHz (8 x 200) I was wondering how to find out if its CPU frequency is controllable? What softwares or other ways can control my CPU frequency? My OSes are Windows XP and Ubuntu. Can I control CPU frequency so that the CPU temperature can be controlled not to exceed some temperature? Thanks and regards! More information: My laptop is Acer Aspire 5000. Its motherboard is reported by Speccy as: Manufacturer: Acer, Inc. Model: Lugano M Version: Not Applicable Chipset Vendor: SiS Chipset Model: 760GX Chipset Revision: 03 Southbridge Vendor: SiS Southbridge Model: LPC Bridge Southbridge Revision: 25 BIOS Brand: Acer Version: 3A19 Date: 05/17/05

    Read the article

  • add an image in listview

    - by danish
    Hi I would like to add more images in my list view as this code below only displays image 1 and 2 continuously in each row. What I want to do is display a different image for each different row. Here is mycode below; Thanks for any help. I am not good at java please change the code where necessary and I can then refer to it. public class starters extends ListActivity { private static class EfficientAdapter extends BaseAdapter { private LayoutInflater mInflater; private Bitmap mIcon1; private Bitmap mIcon2; private Bitmap mIcon3; private Bitmap mIcon4; private Bitmap mIcon5; private Bitmap mIcon6; private Bitmap mIcon7; private Bitmap mIcon8; private Bitmap mIcon9; private Bitmap mIcon10; public EfficientAdapter(Context context) { // Cache the LayoutInflate to avoid asking for a new one each time. mInflater = LayoutInflater.from(context); // Icons bound to the rows. mIcon1 = BitmapFactory.decodeResource(context.getResources(), R.drawable.starters1); mIcon2 = BitmapFactory.decodeResource(context.getResources(), R.drawable.starters2); mIcon3 = BitmapFactory.decodeResource(context.getResources(), R.drawable.starters3); mIcon4 = BitmapFactory.decodeResource(context.getResources(), R.drawable.starters4); mIcon5 = BitmapFactory.decodeResource(context.getResources(), R.drawable.starters5); mIcon6 = BitmapFactory.decodeResource(context.getResources(), R.drawable.starters6); mIcon7 = BitmapFactory.decodeResource(context.getResources(), R.drawable.starters7); mIcon8 = BitmapFactory.decodeResource(context.getResources(), R.drawable.starters8); mIcon9 = BitmapFactory.decodeResource(context.getResources(), R.drawable.starters9); mIcon10 = BitmapFactory.decodeResource(context.getResources(), R.drawable.starters10); } public int getCount() { return DATA.length; } public Object getItem(int position) { return position; } public long getItemId(int position) { return position; } public View getView(int position, View convertView, ViewGroup parent) { // A ViewHolder keeps references to children views to avoid unneccessary calls // to findViewById() on each row. ViewHolder holder; // When convertView is not null, we can reuse it directly, there is no need // to reinflate it. We only inflate a new View when the convertView supplied // by ListView is null. if (convertView == null) { convertView = mInflater.inflate(R.layout.starters, null); // Creates a ViewHolder and store references to the two children views // we want to bind data to. holder = new ViewHolder(); holder.text = (TextView) convertView.findViewById(R.id.text01); holder.text = (TextView) convertView.findViewById(R.id.secondLine); holder.icon = (ImageView) convertView.findViewById(R.id.icon01); convertView.setTag(holder); } else { // Get the ViewHolder back to get fast access to the TextView // and the ImageView. holder = (ViewHolder) convertView.getTag(); } // Bind the data efficiently with the holder. holder.text.setText(DATA[position]); holder.icon.setImageBitmap((position & 1) ==1 ? mIcon1 : mIcon2); return convertView; } static class ViewHolder { TextView text; ImageView icon; } } @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setListAdapter(new EfficientAdapter(this)); } private static final String[] DATA = { "Original nachos", "Toasted chicken and cheese quesadillas", "Chicken, lime and coriander nachos", "Spicy bean and cheese quesadillas", "Tuna and corn quesadillas", "Cheesy bean and sweetcorn nachos", "Crispy chicken, avocado and lime salad", "Beef and baby corn tostada", "Spicy mexican rice with chicken and prawns", "Chilli potato boats"}; }

    Read the article

  • iTunes Sync erasing Exchange calendar / contacts

    - by Garrett
    We have had a handful of instances where corporate iPhone users will be syncing Calendar/Contacts/etc in their iTunes settings, and we would like to prevent this. Unfortunately, when they sync their empty home Outlook calendars it then overwrites everything in their iPhone calendar. This has the unpleasant side effect up "updating" Exchange and wiping out every meeting they have. Luckily, our backups have bailed us out in each case - there seems to be no recovering from it any other way as the data is gone. We prefer to allow our users to continue loading media on their phones, which we believe requires iTunes. Is there a way, through Exchange ActiveSync or iOS mobile management, to prevent this from happening?

    Read the article

  • Rails with phusion passenger and wordpress

    - by Venu
    We had a site developed using on ruby on rails. It had Website Web services for mobile app Admin panel to manage data. We started using wordpress to manage site content. We have finished development, have to move to production now. This is the current virtual host code for wordpress to work under /wordpress URI. <Location /wordpress> PassengerEnabled off <IfModule mod_rewrite.c> RewriteEngine On RewriteBase /wordpress/ RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule . /wordpress/index.php [L] </IfModule> </Location> I want to make phusion passenger work for the /admin and /api URIs. And / to go to wordpress. Can we change the document root based on the URI? or any other better solution?

    Read the article

  • hudson/jenkins: help needed to get started with customization work

    - by user64204
    I'm would to customize jenkins by adding links to the left hand side panel and use the pages associated with these links to serve some custom content in place of the jobs/views table displayed by default. I managed to add links to the side-bar using the sidebar-links plugin. Now I'm trying to see how to replace the content of the <td id="main-panel"> element with some custom content. The custom content is generated by some PHP scripts which ideally should be called by hudson every time the custom pages are requested, though if too complicated I can either create static content to be served by jenkins by calling my PHP scripts in a crontab or see if calls to the PHP scripts can be done by apache itself before the page requests are sent to jenkins. I'm not sure writing a plugin is the best way to proceed and I would like to have your thoughts as to how you think I should implement this.

    Read the article

  • new ubuntu server installation - java server not receiving packets

    - by James
    I have developed a Java server which listens for UDP packets which come from mobile devices. At the moment, it works correctly if I run my Server on my windows PC. I can receive and respond to the UDP packets sent from my phone (over 3g, not wifi). However, I am trying to run the Server on a different computer which I found lying around my house. I have basically done a clean install of Ubuntu Server edition, updated it, installed the java run time environment and configured port forwarding to allow connections on the appropriate port. I have also tried to disable the firewall. The problem is, it doesn't appear as if the server is receiving any packets and I've exhausted my brain thinking on how to solve/debug the problem. Can anyone suggest to me what the problem might be? or more likely something I can do to help me find out more information about what is going wrong.

    Read the article

  • Why is hibernation still used?

    - by Moses
    I've never quite understood the original purpose of the Hibernation power state in Windows. I understand how it works, what processes take place, and what happens when you boot back up from Hibernate, but I've never truly understood why it's used. With today's technology, most notably with SSDs, RAM and CPUs becoming faster and faster, a cold boot on a clean/efficient Windows installation can be pretty fast (for some people, mere seconds from pushing the power button). Standby is even faster, sometimes instantaneous. Even SATA drives from 5-6 years ago can accomplish these fast boot times. Hibernation seems pointless to me when modern technology is considered, but perhaps there are applications that I'm not considering. What was the original purpose behind hibernation, and why do people still use it? Edit: I rescind my comment about hibernation being obsolete, as it obviously has very practical applications to laptops and mobile PCs, considering the power restrictions. I was mostly referring to hibernation being used on a desktop.

    Read the article

  • Deployment of broadband network

    - by sthustfo
    Hi all, My query is related to broadband network deployment. I have a DSL modem connection provided by my operator. Now the DSL modem has a built-in NAT and DHCP server, hence it allocates IP addresses to any client devices (laptops, PC, mobile) that connect to it. However, the DSL modem also gets a public IP address X that is provisioned by the operator. My question is Whether this IP address X provisioned by operator is an IP address that is directly on the public Internet? Is it likely (practical scenario) that my broadband operator will put in one more NAT+DHCP server and provide IP addresses to all the modems within his broadband network. In this case, the IP addresses allotted to the modem devices will not be directly on the public Internet. Thanks in advance.

    Read the article

  • ubuntu12.04 hangs at checking battery state

    - by crystalbass17
    My 12.04 system hangs at "Checking battery state". At this stage, no commands work eg: ctrl+alt+f1, alt+f5. I ran recovery mode, I ran the command sudo mount -o remount, rw sudo dpkg-reconfigure gdm and gdm was the only one installed so I didn't get a GUI screen. I have an integrated graphics card "Intel Corporation Mobile 4 chipset Integrated Graphics Controller (rev 07)". So I cannot install nvidia drivers as everyone else suggests. I have gone through several similar questions but everyone suggests reconfiguring gdm or reinstalling graphic drivers. I did sudo add-apt-repository ppa:ubuntu-x-swat/x-updates sudo apt-get update sudo apt-get upgrade to get the latest x-swat drivers. The system still hung at the same line. The other option is to reinstall ubuntu, which is out of the question, since we have a very specific install for our project where the settings are very hard to duplicate. Suggestions/Comments welcome.

    Read the article

  • Getting error to access webservice.

    - by nemade-vipin
    hi friend, I have created webapplication in which I am getting the error:- ypeError: Error #1009: Cannot access a property or method of a null object reference. at FlexSBTSApp/displayString()[E:\Users\User1\Documents\Flex Builder 3\FlexSBTSApp\src\FlexSBTSApp.mxml:38] at FlexSBTSApp/___FlexSBTSApp_Button1_click()[E:\Users\User1\Documents\Flex Builder 3\FlexSBTSApp\src\FlexSBTSApp.mxml:118] my code is:- import mx.controls.*; [Bindable] private var childName:ArrayCollection; [Bindable] private var childId:ArrayCollection; private var photoFeed:ArrayCollection; private var arrayOfchild:Array; [Bindable] private var childObj:Child; public var user:SBTSWebService; public function initApp():void { user = new SBTSWebService(); user.addSBTSWebServiceFaultEventListener(handleFaults); } public function displayString():void { // Instantiate a new Entry object. var newEntry:GetSBTSMobileAuthentication = new GetSBTSMobileAuthentication(); newEntry.mobile=mobileno.text; newEntry.password=password.text; user.addgetSBTSMobileAuthenticationEventListener(authenticationResult); user.getSBTSMobileAuthentication(newEntry); } public function handleFaults(event:FaultEvent):void { Alert.show("A fault occured contacting the server. Fault message is: " + event.fault.faultString); } public function authenticationResult(event:GetSBTSMobileAuthenticationResultEvent):void { if(event.result != null && event.result._return>0) { if(event.result._return > 0) { var UserId:int = event.result._return; getChildList(UserId); viewstack2.selectedIndex=1; } else { Alert.show("Authentication fail"); } } } public function getChildList(userId:int):void { var childEntry:GetSBTSMobileChildrenInfo = new GetSBTSMobileChildrenInfo(); childEntry.UserId = userId; user.addgetSBTSMobileChildrenInfoEventListener(sbtsChildrenInfoResult); user.getSBTSMobileChildrenInfo(childEntry); } public function sbtsChildrenInfoResult(event:GetSBTSMobileChildrenInfoResultEvent):void { if(event.result != null && event.result._return!=null) { arrayOfchild = event.result._return as Array; photoFeed = new ArrayCollection(arrayOfchild); childName = new ArrayCollection(); for( var count:int=0;count<photoFeed.length;count++) { childObj = photoFeed.getItemAt(count,0) as Child; childName.addItem(childObj.strName); } } } ]]> <mx:Panel width="500" height="300" headerColors="[#000000,#FFFFFF]"> <mx:TabNavigator id="viewstack2" selectedIndex="0" creationPolicy="all" width="100%" height="100%"> <mx:Form label="Login Form"> <mx:FormItem label="Mobile NO:"> <mx:TextInput id="mobileno" /> </mx:FormItem> <mx:FormItem label="Password:"> <mx:TextInput displayAsPassword="true" id="password" /> </mx:FormItem> <mx:FormItem> <mx:Button label="Login" click="displayString()"/> </mx:FormItem> </mx:Form> <mx:Form label="Child List"> <mx:Label width="100%" color="blue" text="Select Child."/> <mx:RadioButtonGroup id="radioGroup"/> <mx:Repeater id="fieldRepeater" dataProvider="{childName}"> <mx:RadioButton groupName="radioGroup" label="{fieldRepeater.currentItem}" value="{fieldRepeater.currentItem}"/> </mx:Repeater> </mx:Form> <mx:Form label="Child Information"> </mx:Form> <mx:Form label="Trace Path"> </mx:Form> </mx:TabNavigator> </mx:Panel>

    Read the article

  • Screen is black at login screen if display driver is enabled

    - by Amir Rachum
    I have a Lenovo x200 and recently its screen didn't work, so I took it to a repair lab. The guy told me they replaced the screen inverter. I powered up the laptop and the ThinkPad logo was shown, so I was happy. When I got home the computer would boot up, then instead of the logon screen, I got a black screen. Went to safe mode, disabled the display adapters, reset the computer, and I got a clean boot. Then I tried to reinstall the drivers, and it just led to the same condition. My video card is (from device manager): Mobile Intel(R) 4 Series Express Chipset Family. Now my laptop works as I'm working with display drivers disabled, but without display drivers I can't watch movies, etc. Any solution to this problem? Edit: I plugged in an external monitor and it works on it with display drivers enabled. However, it does not find the laptop monitor.

    Read the article

  • Adobe Illustrator - Objects are Expanded on Restart

    - by Shatou Dev
    I use Adobe Illustrator extensively for mobile development. For example, for Android app, I have many illustrations with different densities and sizes. I use many effects such as outer glow, round corners and such. However, sometimes, when I close the .ai file and re-open it later, I found all my objects expanded. Effects are expanded. For example, the round corner effect is now expanded and I cannot re-size any object. I am using a MacBook Pro. I am suspecting both Time Machine and Dropbox. As much as I can recall, it also appears with CS6 version, not CS5.

    Read the article

  • OS X "service" for running JavaScript bookmarklets in any app?

    - by Spiff
    I have some JavaScript bookmarklets that work on the selected text in a web page, but I'd like to be able to use them on the selected text in any Mac OS X app, not just browsers or things that provide browser-like views. Mac OS X has the "Services" (sub)menu where any app can publish services that it can provide to other apps, but I don't know how to make my bookmarklets show up as services there. Is there a way to make JavaScript bookmarklets show up as Mac OS X "Services", or otherwise execute JavaScript against the selected text in any Mac OS X app?

    Read the article

  • Web application design with distributed servers

    - by Bonn
    I want to build a web application/server with this structure: main-server sub-server transaction-server (create, update, delete) view-server (view, search) authentication-server documents-server reporting-server library-server e-learning-server The main-server acts as host server for sub-server. I can add many sub-servers and connect it to main-server (via plug-play interface maybe), then it can begin querying data from another sub-servers (which has been connected to the main-server). The sub-servers can be anywhere as long as connected to internet. The main-server can manage all sub-servers which are connected to it (query data, setting permission between sub-servers, etc). The purpose is simple, the web application will be huge as the company grows, so I want to distribute it into small connected plug-able servers. My question is, does the structure above already have a standardized method? or are there any different views? what are the technologies needed? I need a lot of researches before the execution plan begin. thanks a lot.

    Read the article

  • Change ListView background - strage behaviour

    - by Beasly
    Hi again, I have a problem with changing the background of a view in a ListView. What I need: Change the background image of a row onClick() What actually happens: The background gets changed (selected) after pressing e.g. the first entry. But after scrolling down the 8th entry is selected too. Scroll back to the top the first isn't selected anymore. The second entry is selected now. Continue scrolling and it continues jumping... What i'm dong in the Code: I have channels, and onClick() I toggle an attribute of channel boolean selected and then I change the background. I'm doing this only onClick() thats why I don't get why it's actuelly happening on other entries too. One thing I notices is: It seems to be only the "drawing"-part because the item which get selected "by it self" has still the selected value on false I think it seems to have something to do with the reuse of the views in the custom ListAdapters getView(...) Code of onClick() in ListActivity: @Override protected ViewHolder createHolder(View v) { // createHolder will be called only as long, as the ListView is not // filled TextView title = (TextView) v .findViewById(R.id.tv_title_channel_list_adapter); TextView content = (TextView) v .findViewById(R.id.tv_content_channel_list_adapter); ImageView icon = (ImageView) v .findViewById(R.id.icon_channel_list_adapter); if (title == null || content == null || icon == null) { Log.e("ERROR on findViewById", "Couldn't find Title, Content or Icon"); } ViewHolder mvh = new MyViewHolder(title, content, icon); // We make the views become clickable // so, it is not necessary to use the android:clickable attribute in // XML v.setOnClickListener(new ChannelListAdapter.OnClickListener(mvh) { public void onClick(View v, ViewHolder viewHolder) { // we toggle the enabled state and also switch the the // background MyViewHolder mvh = (MyViewHolder) viewHolder; Channel ch = (Channel) mvh.data; ch.setSelected(!ch.getSelected()); // toggle if (ch.getSelected()) { v.setBackgroundResource(R.drawable.row_blue_selected); } else { v.setBackgroundResource(R.drawable.row_blue); } // TESTING Log.d("onClick() Channel", "onClick() Channel: " + ch.getTitle() + " selected: " + ch.getSelected()); } }); return mvh; } Code of getView(...): @Override public View getView(int position, View view, ViewGroup parent) { ViewHolder holder; // When view is not null, we can reuse it directly, there is no need // to reinflate it. // We only inflate a new View when the view supplied by ListView is // null. if (view == null) { view = mInflater.inflate(mViewId, null); // call own implementation holder = createHolder(view); // TEST // we set the holder as tag view.setTag(holder); } else { // get holder back...much faster than inflate holder = (ViewHolder) view.getTag(); } // we must update the object's reference holder.data = getItem(position); // call the own implementation bindHolder(holder); return view; } I really would appreciate any idea how to solve this! :) If more information is needed please tell me. Thanks in advance!

    Read the article

  • Will Bluetooth hands-free drivers be installed if BT stack doesn't support A2DP?

    - by AndrejaKo
    I have a hands-free device which has no problems being paired with windows and I can set it to be the default sound output device, I don't actually hear anything on the unit, but it worked fine with GNU/Linux and with my mobile phone. From what I can see, the cause of that is usually a problem with Bluetooth stack. I think that I have Broadcom Bluetooth stack installed, so it should be working but it isn't. To make things better, my Bluetooth radio is integrated into my laptop and manufacturer isn't providing drivers for it and Broadcom itself recently pulled support, so I can't just reinstall the stack to make sure I have newest version.

    Read the article

  • Linux only recognizes 800Mhz from 2Ghz

    - by Leo
    I tried with Suse 11 (KDE), Xubuntu 11.10 and Lubuntu 11.10 and these systems only recognizes 800Mhz from my processor of 2Ghz! The utilities I used are: linuxinfo, sysinfo, "system profiler and benchmark". And all of this only shows 800Mhz My system specs are: AMD Turion 64 Mobile MK36 512 RAM nVidia Geforce Go 6150 (I also tried with nVidia restricted drivers) 120GB Hard drive The weirdest thing is that Windows XP and 7 recognize the 2Ghz of my processor, What can I do? p.s. (It is not just the value of 800Mhz, I also feel my system very slow with linux)

    Read the article

  • Using Apache Environment Variables to set custom ErrorDocument

    - by Tad
    I've got a set of RewriteCond rules that test for various mobile devices and then set environment variables like "env=device:.iphone" or "env=device:.smartphone" if the useragent matches an iPhone or Android device. I'm trying to now redirect the user to custom-styled 404/500 server error pages for each device, by way of the error pages. Ideally I'd like to be able to test for a variable being there, and then write in a custom ErrorDocument string. But an apache doesn't seem to work in this case. Any ideas how I can construct if/else tests in an apache conf file for environment vars?

    Read the article

  • How to tell if OpenGL is really working in Ubuntu 10.04

    - by Jonathan
    I have a lenovo S9e running Intel integrated graphics. Here is my lspci output related to the graphics: 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03) Subsystem: Lenovo Device 3870 Flags: bus master, fast devsel, latency 0 Memory at f0580000 (32-bit, non-prefetchable) [size=512K] Capabilities: [d0] Power Management version 2 I want to know how I can make sure OpenGL support is running in full on an Ubuntu 10.04 installation. I have a few hints to think that it is not: The "Desktop Effects" will not load Apps such as stardock, when attempting to use OpenGL rendering, will display black boxes instead of transparency In the games Pioneers, the number-tile icons are suspiciously just black circles Windows games running with Wine will only support software rendering, not hardware rendering When I boot into a Knoppix LiveCD, the desktop effects do work, splendidly, meaning compiz detects my computer as capable. My problem with troubleshooting is that Canonical has basically eliminated the conf-file-based mechanism of X11 as far as I can tell, thus making it even harder to ensure graphics modules are loading properly. How do I debug and test OpenGL on m Ubuntu 10.04 installation?

    Read the article

< Previous Page | 301 302 303 304 305 306 307 308 309 310 311 312  | Next Page >