Search Results

Search found 8970 results on 359 pages for 'space'.

Page 305/359 | < Previous Page | 301 302 303 304 305 306 307 308 309 310 311 312  | Next Page >

  • How to detect changing directory size in Perl

    - by materiamage
    Hello, I am trying to find a way of monitoring directories in Perl, in particular the size of a directory, and upon detecting a change in directory size, perform a particular action. The issue I have is with large files that require a noticeable amount of time to copy into this directory, i.e. 100MB. What happens (in Windows, not Unix) is the system reserves enough disk space for the entire file, even though the file is still copying in progress. This causes problems for me, because my script will try to perform an action on this file that has not finished copying over. I can easily detect directory size changes in Unix via 'du', but 'du' in Windows does not behave the same way. Are there any accurate methods of detecting directory size changes in Perl? Edit: Some points to clarify: - My Perl script is only monitoring a particular directory, and upon detecting a new file or a new directory, perform an action on this new file or directory. It is not copying any files; users on the network will be copying files into the directory I am monitoring. - The problem occurs when a new file or directory appears (copied, not moved) that is significantly large ( 100MB, but usually a couple GB) and my program fires before this copy completes - In Unix I can easily 'du' to see that the file/directory in question is growing in size, and take the appropriate action - In Windows the size is static, so I cannot detect this change - opendir/readdir/closedir is not feasible, as some of the directories that appear may contain thousands of files, and I want to avoid the overhead of Ideally I would like my program to be triggered on change, but I am not sure how to do this. As of right now it busy waits until it detects a change. The change in file/directory size is not in my control.

    Read the article

  • unexplained spacing in horizontal panel in GWT

    - by special0ne
    hi, i am adding widgets to a horizontal panel, and i want them to be all once next to the other on the left corner. even though i have set the spacing=0 and alignment= left the widgets still have space between them. they are spread evenly in the panel. please see the code here for the widget C'tor and the function that adds a new tab (toggle button) tabsPanel is a horizontalPanel, that you can see is aligned to left/right according to the locale any advise would be appreciated thanks.... public TabsWidgetManager(int width, int height, int tabs_shift_direction){ DecoratorPanel decorContent = new DecoratorPanel(); DecoratorPanel decorTitle = new DecoratorPanel(); widgetPanel.setSize(Integer.toString(width), Integer.toString(height)); tabsPanel.setSize(Integer.toString(UIConst.USER_CONTENT_WIDTH), Integer.toString(UIConst.TW_DEFAULT_TAB_HEIGHT)); tabsPanel.setSpacing(0); if (tabs_shift_direction==1) tabsPanel.setHorizontalAlignment(HorizontalPanel.ALIGN_LEFT); else tabsPanel.setHorizontalAlignment(HorizontalPanel.ALIGN_RIGHT); decorTitle.add(tabsPanel); contentPanel.setSize(Integer.toString(UIConst.USER_CONTENT_WIDTH), Integer.toString(UIConst.USER_CONTENT_MINUS_TABS_HEIGHT)); decorContent.add(contentPanel); widgetPanel.add(decorTitle, 0, 0); widgetPanel.add(decorContent, 0, UIConst.TW_DEFAULT_TAB_HEIGHT+15); initWidget(widgetPanel); } public void addTab(String title, Widget widget){ widget.setVisible(false); ToggleButton tab = new ToggleButton(title); tabsList.add(tab); tab.setSize(Integer.toString(UIConst.TW_TAB_DEFAULT_WIDTH), Integer.toString(UIConst.TW_TAB_DEFAULT_HEIGHT)); tab.addClickHandler(new ClickHandler() { @Override public void onClick(ClickEvent event) { handleTabClick((ToggleButton)event.getSource()); } }); //adding to the map tabToWidget.put(tab, widget); // adding to the tabs bar tabsPanel.add(tab); //adding to the content contentPanel.add(widget); }

    Read the article

  • Hibernate: Walk millions of rows and don't leak memory

    - by Autocracy
    The below code functions, but Hibernate never lets go of its grip of any object. Calling session.clear() causes exceptions regarding fetching a joined class, and calling session.evict(currentObject) before retrieving the next object also fails to free the memory. Eventually I exhaust my heap space. Checking my heap dumps, StatefulPersistenceContext is the garbage collector's root for all references pointing to my objects. public class CriteriaReportSource implements JRDataSource { private ScrollableResults sr; private Object currentObject; private Criteria c; private static final int scrollSize = 10; private int offset = 1; public CriteriaReportSource(Criteria c) { this.c = c; advanceScroll(); } private void advanceScroll() { // ((Session) Main.em.getDelegate()).clear(); this.sr = c.setFirstResult(offset) .setMaxResults(scrollSize) .scroll(ScrollMode.FORWARD_ONLY); offset += scrollSize; } public boolean next() { if (sr.next()) { currentObject = sr.get(0); if (sr.isLast()) { advanceScroll(); } return true; } return false; } public Object getFieldValue(JRField jrf) throws JRException { Object retVal = null; if(currentObject == null) { return null; } try { retVal = PropertyUtils.getProperty(currentObject, jrf.getName()); } catch (Exception ex) { Logger.getLogger(CriteriaReportSource.class.getName()).log(Level.SEVERE, null, ex); } return retVal; } }

    Read the article

  • Potential problem with C standard malloc'ing chars.

    - by paxdiablo
    When answering a comment to another answer of mine here, I found what I think may be a hole in the C standard (c1x, I haven't checked the earlier ones and yes, I know it's incredibly unlikely that I alone among all the planet's inhabitants have found a bug in the standard). Information follows: Section 6.5.3.4 ("The sizeof operator") para 2 states "The sizeof operator yields the size (in bytes) of its operand". Para 3 of that section states: "When applied to an operand that has type char, unsigned char, or signed char, (or a qualified version thereof) the result is 1". Section 7.20.3.3 describes void *malloc(size_t sz) but all it says is "The malloc function allocates space for an object whose size is specified by size and whose value is indeterminate". It makes no mention at all what units are used for the argument. Annex E startes the 8 is the minimum value for CHAR_BIT so chars can be more than one byte in length. My question is simply this: In an environment where a char is 16 bits wide, will malloc(10 * sizeof(char)) allocate 10 chars (20 bytes) or 10 bytes? Point 1 above seems to indicate the former, point 2 indicates the latter. Anyone with more C-standard-fu than me have an answer for this?

    Read the article

  • Parse a CSV file using python (to make a decision tree later)

    - by Margaret
    First off, full disclosure: This is going towards a uni assignment, so I don't want to receive code. :). I'm more looking for approaches; I'm very new to python, having read a book but not yet written any code. The entire task is to import the contents of a CSV file, create a decision tree from the contents of the CSV file (using the ID3 algorithm), and then parse a second CSV file to run against the tree. There's a big (understandable) preference to have it capable of dealing with different CSV files (I asked if we were allowed to hard code the column names, mostly to eliminate it as a possibility, and the answer was no). The CSV files are in a fairly standard format; the header row is marked with a # then the column names are displayed, and every row after that is a simple series of values. Example: # Column1, Column2, Column3, Column4 Value01, Value02, Value03, Value04 Value11, Value12, Value13, Value14 At the moment, I'm trying to work out the first part: parsing the CSV. To make the decisions for the decision tree, a dictionary structure seems like it's going to be the most logical; so I was thinking of doing something along these lines: Read in each line, character by character If the character is not a comma or a space Append character to temporary string If the character is a comma Append the temporary string to a list Empty string Once a line has been read Create a dictionary using the header row as the key (somehow!) Append that dictionary to a list However, if I do things that way, I'm not sure how to make a mapping between the keys and the values. I'm also wondering whether there is some way to perform an action on every dictionary in a list, since I'll need to be doing things to the effect of "Everyone return their values for columns Column1 and Column4, so I can count up who has what!" - I assume that there is some mechanism, but I don't think I know how to do it. Is a dictionary the best way to do it? Would I be better off doing things using some other data structure? If so, what?

    Read the article

  • Are UTF16 (as used by for example wide-winapi functions) characters always 2 byte long?

    - by Cray
    Please clarify for me, how does UTF16 work? I am a little confused, considering these points: There is a static type in C++, WCHAR, which is 2 bytes long. (always 2 bytes long obvisouly) Most of msdn and some other documentation seem to have the assumptions that the characters are always 2 bytes long. This can just be my imagination, I can't come up with any particular examples, but it just seems that way. There are no "extra wide" functions or characters types widely used in C++ or windows, so I would assume that UTF16 is all that is ever needed. To my uncertain knowledge, unicode has a lot more characters than 65535, so they obvisouly don't have enough space in 2 bytes. UTF16 seems to be a bigger version of UTF8, and UTF8 characters can be of different lengths. So if a UTF16 character not always 2 bytes long, how long else could it be? 3 bytes? or only multiples of 2? And then for example if there is a winapi function that wants to know the size of a wide string in characters, and the string contains 2 characters which are each 4 bytes long, how is the size of that string in characters calculated? Is it 2 chars long or 4 chars long? (since it is 8 bytes long, and each WCHAR is 2 bytes)

    Read the article

  • Best way to make a WYSIWYG in Flex?

    - by hngry4powr
    Hello, I have a client that wants a WYSIWYG form that behaves like MS word. It will have some section labels in it, with users expected to enter notes for each section, and it needs a place holder for a chart. The trick is that the user needs to know where page breaks are going to fall when printed. The customer agrees to fixed size paper with fixed sized margins. How should I approach this challenge? Thank you very much for your suggestions. Here is an example: Section 1: Explain Idea Here { As user types in this section, the space between this section and the next section expands, but I as the user can't delete the lines that say Section 1 or 2, or the place holder for the chart. However if I type a lot of text, I need to display where the page breaks are with a dashed line or something, so the user can make sure the content enters appears on the desired page. If I type a lot here for example, section 2 will get pushed onto the next page} Section 2: State why this is a Good Idea [ PLACE HOLDER FOR CHART . . . ] Section 3: Additional Remarks:

    Read the article

  • How to have an iCalendar (RFC 2445) repeat YEARLY with duration

    - by Todd Brooks
    I have been unsuccessful in formulating a RRULE that would allow an event as shown below: Repeats YEARLY, from first Sunday of April to last day of May, occuring on Monday, Wednesday and Friday, until forever. FREQ=YEARLY;BYMONTH=4;BYDAY=SU (gives me the first Sunday of April repeating yearly) and FREQ=YEARLY;BYMONTH=5;BYMONTHDAY=-1 (gives me the last day of May repeating yearly) But I can't figure out how to have the event repeat yearly between those dates for Monday, Wednesday and Friday. Suggestions? Update: Comments don't have enough space to respond to Chris' answer, so I am editing the question with further information. Unfortunately, no. I don't know if it is the DDay.iCal library I'm using, or what, but that doesn't work either. I've found that the date start can't be an ordinal date (first Sunday, etc.)..it has to be a specific date, which makes it difficult for my requirements. Even using multiple RRULE's it doesn't seem to work: BEGIN:VCALENDAR VERSION:2.0 PRODID:-//DDay.iCal//NONSGML ddaysoftware.com//EN BEGIN:VEVENT CREATED:20090717T033307Z DTSTAMP:20090717T033307Z DTSTART:20090101T000000 RRULE:FREQ=YEARLY;WKST=SU;BYDAY=MO,WE,FR;BYMONTH=4,5 RRULE:FREQ=YEARLY;WKST=SU;BYDAY=1SU;BYMONTH=4 RRULE:FREQ=YEARLY;WKST=SU;BYMONTH=5;BYMONTHDAY=-1 SEQUENCE:0 UID:352ed9d4-04d0-4f06-a094-fab7165e5c74 END:VEVENT END:VCALENDAR That looks right on the face (I'm even starting the event on 1/1/2009), but when I start testing whether certain days are valid, I get incorrect results. For example, 4/1/2009 12:00:00 AM = True // Should be False 4/6/2009 12:00:00 AM = True 4/7/2009 12:00:00 AM = False 4/8/2009 12:00:00 AM = True 5/1/2009 12:00:00 AM = True 5/2/2009 12:00:00 AM = False 5/29/2009 12:00:00 AM = True 5/31/2009 12:00:00 AM = True // Should be False 6/1/2009 12:00:00 AM = False I'm using Douglas Day's DDay.iCal software, but I don't think it is a bug in that library. I think this might be a limitation in iCalendar (RFC 2445). Thoughts?

    Read the article

  • using ini file in vb6, problem with path to file

    - by DrPut
    I have read many articles about how to use an INI file within my VB6 project. I don't have a problem with the methods, my problem is how to make the EXE file find the INI file. I don't want to hard code the path in the program. I simply want the EXE to expect the INI file to be present in the same folder the EXE is executed from. When I run the program from inside VB6 IDE, the INI is found and processed. When I compile the program and run the EXE, nothing is found. My code looks like: gServer = sGetINI(sINIFile, "TOOLBOM", "ServerName", "?") where TOOLBOM is the [Section] and "ServerName" is the key for the value. I obtained the following code for the API: Rem API DECLARATIONS Declare Function GetPrivateProfileString Lib "kernel32" Alias _ "GetPrivateProfileStringA" (ByVal lpApplicationName _ As String, ByVal lpKeyName As Any, ByVal lpDefault _ As String, ByVal lpReturnedString As String, ByVal _ nSize As Long, ByVal lpFileName As String) As Long Declare Function WritePrivateProfileString Lib "kernel32" Alias _ "WritePrivateProfileStringA" (ByVal lpApplicationName _ As String, ByVal lpKeyName As Any, ByVal lpString As Any, _ ByVal lpFileName As String) As Long Public Function sGetINI(sINIFile As String, sSection As String, sKey _ As String, sDefault As String) As String Dim sTemp As String * 256 Dim nLength As Integer sTemp = Space$(256) nLength = GetPrivateProfileString(sSection, sKey, sDefault, sTemp, _ 255, sINIFile) sGetINI = Left$(sTemp, nLength) End Function Public Sub writeINI(sINIFile As String, sSection As String, sKey _ As String, sValue As String) Dim n As Integer Dim sTemp As String sTemp = sValue Rem Replace any CR/LF characters with spaces For n = 1 To Len(sValue) If Mid$(sValue, n, 1) = vbCr Or Mid$(sValue, n, 1) = vbLf _ Then Mid$(sValue, n) = " " Next n n = WritePrivateProfileString(sSection, sKey, sTemp, sINIFile) End Sub

    Read the article

  • getting attribute as column headers

    - by edwards
    I have the following XML: <DEVICEMESSAGES> <VERSION xml="1" checksum="" revision="0" envision="33050000" device="" /> <HEADER id1="0001" id2="0001" content="Nasher[&lt;messageid&gt;]: &lt;!payload&gt;" /> <MESSAGE level="7" parse="1" parsedefvalue="1" tableid="15" id1="24682" id2="24682" eventcategory="1003010000" content="Access to &lt;webpage&gt; was blocked due to its category (&lt;info&gt; by &lt;hostname&gt;)" /> </DEVICEMESSAGES> I am using the following XSLT: <xsl:stylesheet version="2.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform"> <xsl:output method="text"/> <xsl:strip-space elements="*"/> <xsl:template match="DEVICEMESSAGES/HEADERS"> <xsl:value-of select="@id2"/>,<xsl:text/> <xsl:value-of select="@content"/>,<xsl:text/> <xsl:text>&#xa;</xsl:text> </xsl:template> </xsl:stylesheet> I get the following output: 0001 , Nasher[<messageid>]: <!payload> whereas I need the column headings, too: id2, content 0001 , Nasher[<messageid>]: <!payload>

    Read the article

  • DocType xhtml1-transitional.dtd ignores table cell height

    - by Sameer Shariff
    <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml" > <head runat="server"> <title>Untitled Page</title> <link href="Stylesheet.css" rel="stylesheet" type="text/css" /> </head> <body> <table style="height: 100%; width: 100%;"> <tr> <td colspan="2" style="height: 100px;">Header</td> </tr> <tr> <td style="width: 180px;">Links</td> <td>Content</td> </tr> <tr> <td colspan="2" style="height: 25px;">Footer</td> </tr> </table> </body> </html> Stylesheet.css looks as follows: * { margin: 0; padding: 0; } html, body { height: 100%; width: 100%; } Row 1 and 3 above have fixed heights. Row 3 is not filling the remaining space. If i omit the doctype, it works as expected. I need to use this doctype. Please help! Thanks!

    Read the article

  • How do I use InputType=numberDecimal with the "phone" soft keypad?

    - by Adam Dunn
    For an EditText box, the user should only be entering valid numbers, so I am using android:inputType="numberDecimal". Unfortunately, the soft keyboard that Android brings up has numbers only along the top row, while the next three rows have various other symbols (dollar sign, percent sign, exclamation mark, space, etc). Since the numberDecimal only accepts numbers 0-9, negative sign, and decimal point, it would make more sense to use the "phone" soft keyboard (0-9 in a 3x3 grid, plus some other symbols). This would make the buttons larger and easier to hit (since it's a 4x4 grid rather than a 10x4 grid in the same screen area). Unfortunately, using android:inputType="phone" allows non-numeric characters such as parentheses I have attempted to use android:inputType="numberDecimal|phone", but the numberDecimal aspect of the bit flag seems to be ignored. I have also tried using android:inputType="phone" in combination with android:digits="0123456789-.", but that still allows multiple negative signs or decimal points (inputType="number" has really good error checking for things like that, and won't let the user even type it in). I have also tried using android:inputType="phone" in the xml layout file, while using a DigitsKeyListener in the java code, but then that just uses the default number soft keyboard (the one that has numbers only along top row) (it appears to set InputType.TYPE_CLASS_NUMBER, which voids the InputType.TYPE_CLASS_PHONE set by the xml layout). Writing a custom IME wouldn't work, since the user would have to select the IME as a global option outside the app. Is there any way to use the "phone" style soft keyboard while also using the "number" restrictions on what is entered?

    Read the article

  • Eclipse PDT "tips" ?

    - by Pascal MARTIN
    Hi ! (Yes, this is a quite opened and general and subjective question -- it's by design, cause I want tips you think are great !) I'm using Eclipse PDT 2.1 to work in PHP, either for small and/or big projects -- I've been doing so for quite some times, now, actually (since before 1.0 stable, if I remember well)... I was wondering if any of you did know "tips" to be more efficient. Let met explain more in details : I know about things like plugins like Aptana (better editor for JS/CSS), Subversive (for SVN access), RSE, Filesync, integrating Xdebug's debugger, ... What I mean by "tips" is more some little things you discovered one day and since use all the time -- and allow you to be more efficient in your PHP projects. Some examples of "tips" that come to my mind, and that already know and use : ctrl+space to open the list of suggestions for functions / variables names ctrl+shift+R (navigate > open resource) to open a popup which show only files which names contain what you type ; ie, quick opening of files this one might be the perfect example : I know this one is not often known by coworkers and they find it as useful as I do ; so, I guess there might be lots of other things like this one I don't know myself ^^ ctrl+M to switch to full-screen view for the editor (instead of double-click on tabs bar) shift+F2 while on a function name, to open it's page if the PHP manual in a browser Attention Mac Users use Command instead Control. I guess you get the point ; but I'm really open to any suggestion (be it eclipse-related in general, of more PHP/PDT-specific) that can help be be more efficient :-) Anyway, thanks in advance for your help !

    Read the article

  • What is the minimal licensable source code?

    - by Hernán Eche
    Let's suppose I want to "protect" this code about being used without attribution, patenting it, or through any open source licence... #include<stdio.h> int main (void) { int version=2; printf("\r\n.Hello world, ver:(%d).", version); return 0; } It's a little obvious or just a language definition example.. When a source stop being "trivial, banal, commonplace, obvious", and start to be something that you may claim "rights"? Perhaps it depends on who read it, something that could be great geniality for someone that have never programmed, could be just obvious for an expert. It's easy when watching two sources there are 10000 same lines of code, that's a theft.. but that's not always so obvious. How to measure amount of "ownness", it's about creativity? line numbers? complexity? I can't imagine objetive answers for that, only some patches. For example perhaps the complexity, It's not fair to replace "years of engeneering" with "copy and paste". But is there any objetive index for objetive determination of this subject? (In a funny way I imagine this criterion: If the licence is longer than the code, then there is no owner, just to punish not caring storage space and world resources =P)

    Read the article

  • mysterical error

    - by Görkem Buzcu
    i get "customer_service_simulator.exe stopped" error, but i dont know why? this is my c programming project and i have limited time left before deadline. the code is: #include <stdio.h> #include <stdlib.h> #include<time.h> #define FALSE 0 #define TRUE 1 /*A Node declaration to store a value, pointer to the next node and a priority value*/ struct Node { int priority; //arrival time int val; //type int wait_time; int departure_time; struct Node *next; }; Queue Record that will store the following: size: total number of elements stored in the list front: it shows the front node of the queue (front of the queue) rear: it shows the rare node of the queue (rear of the queue) availability: availabity of the teller struct QueueRecord { struct Node *front; struct Node *rear; int size; int availability; }; typedef struct Node *niyazi; typedef struct QueueRecord *Queue; Queue CreateQueue(int); void MakeEmptyQueue(Queue); void enqueue(Queue, int, int); int QueueSize(Queue); int FrontOfQueue(Queue); int RearOfQueue(Queue); niyazi dequeue(Queue); int IsFullQueue(Queue); int IsEmptyQueue(Queue); void DisplayQueue(Queue); void sorteddequeue(Queue); void sortedenqueue(Queue, int, int); void tellerzfunctionz(Queue *, Queue, int, int); int main() { int system_clock=0; Queue waitqueue; int exit, val, priority, customers, tellers, avg_serv_time, sim_time,counter; char command; waitqueue = CreateQueue(0); srand(time(NULL)); fflush(stdin); printf("Enter number of customers, number of tellers, average service time, simulation time\n:"); scanf("%d%c %d%c %d%c %d",&customers, &command,&tellers,&command,&avg_serv_time,&command,&sim_time); fflush(stdin); Queue tellerarray[tellers]; for(counter=0;counter<tellers;counter++){ tellerarray[counter]=CreateQueue(0); //burada teller sayisi kadar queue yaratiyorum } for(counter=0;counter<customers;counter++){ priority=1+(int)rand()%sim_time; //this will generate the arrival time sortedenqueue(waitqueue,1,priority); //here i put the customers in the waiting queue } tellerzfunctionz(tellerarray,waitqueue,tellers,customers); DisplayQueue(waitqueue); DisplayQueue(tellerarray[0]); DisplayQueue(tellerarray[1]); // waitqueue-> printf("\n\n"); system("PAUSE"); return 0; } /*This function initialises the queue*/ Queue CreateQueue(int maxElements) { Queue q; q = (struct QueueRecord *) malloc(sizeof(struct QueueRecord)); if (q == NULL) printf("Out of memory space\n"); else MakeEmptyQueue(q); return q; } /*This function sets the queue size to 0, and creates a dummy element and sets the front and rear point to this dummy element*/ void MakeEmptyQueue(Queue q) { q->size = 0; q->availability=0; q->front = (struct Node *) malloc(sizeof(struct Node)); if (q->front == NULL) printf("Out of memory space\n"); else{ q->front->next = NULL; q->rear = q->front; } } /*Shows if the queue is empty*/ int IsEmptyQueue(Queue q) { return (q->size == 0); } /*Returns the queue size*/ int QueueSize(Queue q) { return (q->size); } /*Shows the queue is full or not*/ int IsFullQueue(Queue q) { return FALSE; } /*Returns the value stored in the front of the queue*/ int FrontOfQueue(Queue q) { if (!IsEmptyQueue(q)) return q->front->next->val; else { printf("The queue is empty\n"); return -1; } } /*Returns the value stored in the rear of the queue*/ int RearOfQueue(Queue q) { if (!IsEmptyQueue(q)) return q->rear->val; else { printf("The queue is empty\n"); return -1; } } /*Displays the content of the queue*/ void DisplayQueue(Queue q) { struct Node *pos; pos=q->front->next; printf("Queue content:\n"); printf("-->Priority Value\n"); while (pos != NULL) { printf("--> %d\t %d\n", pos->priority, pos->val); pos = pos->next; } } void enqueue(Queue q, int element, int priority){ if(IsFullQueue(q)){ printf("Error queue is full"); } else{ q->rear->next=(struct Node *)malloc(sizeof(struct Node)); q->rear=q->rear->next; q->rear->next=NULL; q->rear->val=element; q->rear->priority=priority; q->size++; } } void sortedenqueue(Queue q, int val, int priority) { struct Node *insert,*temp; insert=(struct Node *)malloc(sizeof(struct Node)); insert->val=val; insert->priority=priority; temp=q->front; if(q->size==0){ enqueue(q, val, priority); } else{ while(temp->next!=NULL && temp->next->priority<insert->priority){ temp=temp->next; } //printf("%d",temp->priority); insert->next=temp->next; temp->next=insert; q->size++; if(insert->next==NULL){ q->rear=insert; } } } niyazi dequeue(Queue q) { niyazi del; niyazi deli; del=(niyazi)malloc(sizeof(struct Node)); deli=(niyazi)malloc(sizeof(struct Node)); if(IsEmptyQueue(q)){ printf("Queue is empty!"); return NULL; } else { del=q->front->next; q->front->next=del->next; deli->val=del->val; deli->priority=del->priority; free(del); q->size--; return deli; } } void sorteddequeue(Queue q) { struct Node *temp; struct Node *min; temp=q->front->next; min=q->front; int i; for(i=1;i<q->size;i++) { if(temp->next->priority<min->next->priority) { min=temp; } temp=temp->next; } temp=min->next; min->next=min->next->next; free(temp); if(min->next==NULL){ q->rear=min; } q->size--; } void tellerzfunctionz(Queue *a, Queue b, int c, int d){ int i; int value=0; int priority; niyazi temp; temp=(niyazi)malloc(sizeof(struct Node)); if(c==1){ for(i=0;i<d;i++){ temp=dequeue(b); sortedenqueue((*(a)),temp->val,temp->priority); } } else{ for(i=0;i<d;i++){ while(b->front->next->val==1){ if((*(a+value))->availability==1){ temp=dequeue(b); sortedenqueue((*(a+value)),temp->val,temp->priority); (*(a+value))->rear->val=2; } else{ value++; } } } } } //end of the program

    Read the article

  • Random-access archive for Unix use

    - by tylerl
    I'm looking for a good format for archiving entire file-systems of old Linux computers. TAR.GZ The tar.gz format is great for archiving files with UNIX-style attributes, but since the compression is applied across the entire archive, the design precludes random-access. Instead, if you want to access a file at the end of the archive, you have to start at the beginning and decompress the whole file (which could be several hundred GB) up to the point where you find the entry you're looking for. ZIP Conversely, one selling point of the ZIP format is that it stores an index of the archive: filenames are stored separately with pointers to the location within the archive were to find the data. If I want to extract a file at the end, I look up the position of that file by name, seek to the location, and extract the data. However, it doesn't store file attributes such as ownership, permissions, symbolic links, etc. Other options? I've tried using squashfs, but it's not really designed for this purpose. The file format is not consistent between versions, and building the archive takes a lot of time and space. What other options might suit this purpose better?

    Read the article

  • Algorithm Question

    - by Ravi
    Hi, I am trying to find a O (n) algorithm for this problem but unable to do so even after spending 3 - 4 hours. The brute force method times out (O (n^2)). I am confused as to how to do it ? Does the solution requires dynamic programming solution ? http://acm.timus.ru/problem.aspx?space=1&num=1794 In short the problem is this: There are some students sitting in circle and each one of them has its own choice as to when he wants to be asked a question from a teacher. The teacher will ask the questions in clockwise order only. For example: 5 3 3 1 5 5 This means that there are 5 students and : 1st student wants to go third 2nd student wants to go third 3rd student wants to go first 4th student wants to go fifth 5th student wants to go fifth. The question is as to where should teacher start asking questions so that maximum number of students will get the turn as they want. For this particular example, the answer is 5 because 3 3 1 5 5 2 3 4 5 1 You can see that by starting at fifth student as 1st, 2 students (3 and 5) are getting the choices as they wanted. For this example the answer is 12th student : 12 5 1 2 3 6 3 8 4 10 3 12 7 because 5 1 2 3 6 3 8 4 10 3 12 7 2 3 4 5 6 7 8 9 10 11 12 1 four students get their choices fulfilled. Thanks Ravi

    Read the article

  • Indices instead of pointers in STL containers?

    - by zvrba
    Due to specific requirements [*], I need a singly-linked list implementation that uses integer indices instead of pointers to link nodes. The indices are always interpreted with respect to a vector containing the list nodes. I thought I might achieve this by defining my own allocator, but looking into the gcc's implementation of , they explicitly use pointers for the link fields in the list nodes (i.e., they do not use the pointer type provided by the allocator): struct _List_node_base { _List_node_base* _M_next; ///< Self-explanatory _List_node_base* _M_prev; ///< Self-explanatory ... } (For this purpose, the allocator interface is also deficient in that it does not define a dereference function; "dereferencing" an integer index always needs a pointer to the underlying storage.) Do you know a library of STL-like data structures (i am mostly in need of singly- and doubly-linked list) that use indices (wrt. a base vector) instead of pointers to link nodes? [*] Saving space: the lists will contain many 32-bit integers. With two pointers per node (STL list is doubly-linked), the overhead is 200%, or 400% on 64-bit platform, not counting the overhead of the default allocator.

    Read the article

  • How to load an ImageView from a png file?

    - by Peter vdL
    I take a picture with the camera using Intent intent = new Intent(android.provider.MediaStore.ACTION_IMAGE_CAPTURE ); startActivityForResult( intent, 22 ); When the activity completes, I write the bitmap picture out to a PNG file. java.io.FileOutputStream out = openFileOutput("myfile.png", Context.MODE_PRIVATE); bmp.compress(Bitmap.CompressFormat.PNG, 90, out); That goes OK, and I can see the file is created in my app private data space. I'm having difficulty when I later want to display that image using an ImageView. Can anyone suggest code to do this? If I try to create a File with path separators in, it fails. If I try to create a Uri from a name without separators, that fails. I can open the file OK using: java.io.FileInputStream in = openFileInput("myfile.png"); But that doesn't give me the Uri I need to set an image with iv.setImageURI(u) Summary: I have the picture in a png file in private app data. What's the code to set that into an ImageView? Thanks.

    Read the article

  • Is there a general-purpose printf-ish routine defined in any C standard

    - by supercat
    In many C libraries, there is a printf-style routine which is something like the following: int __vgprintf(void *info, (void)(*print_function(void*, char)), const char *format, va_list params); which will format the supplied string and call print_function with the passed-in info value and each character in sequence. A function like fprintf will pass __vgprintf the passed-in file parameter and a pointer to a function which will cast its void* to a FILE* and output the passed-in character to that file. A function like snprintf will create a struct holding a char* and length, and pass the address of that struct to a function which will output each character in sequence, space permitting. Is there any standard for such a function, which could be used if e.g. one wanted a function to output an arbitrary format to a TCP port? A common approach is to allocate a buffer one hopes is big enough, use snprintf to put the data there, and then output the data from the buffer. It would seem cleaner, though, if there were a standard way to to specify that the print formatter should call a user-supplied routine with each character.

    Read the article

  • string auto splitting in each loop - jquery

    - by sluggerdog
    I have the following jquery code that is looping through the returned json data, for some reason is it splitting the suburb by a space when being assigned as the value but not as the text, I cannot work out why this is happening. MY CODE $.each(data , function( index, obj ) { $.each(obj, function( key, value ) { var suburb = $.trim(value['mcdl01']); var number = $.trim(value['mcmcu']); $("#FeedbackBranchName").append("<option value=" + suburb + ">" + suburb + " (" + number + ")</option>"); }); }); SAMPLE RETURNED RESULTS <option **value="AIRLIE" beach=""**>AIRLIE BEACH (4440)</option> <option value="ASHMORE">ASHMORE (4431)</option> <option **value="BANYO" commercial=""**>BANYO COMMERCIAL (4432)</option> <option value="BEENLEIGH">BEENLEIGH (4413)</option> <option value="BERRIMAH">BERRIMAH (4453)</option> <option **value="BOWEN" hills=""**>BOWEN HILLS (4433)</option> Notice how for AIRLEE BEACH, BANYO COMMERICAL AND BOWN HILLS the second word has been separated out from the value attribute but it's fine at the text level. Anyone have any idea why this might happen? Thanks

    Read the article

  • How to remove the small of padding around the ListBoxItem?

    - by Darf Zon
    I'm styling a listBox. i'm trying to clear the margins, so I realized which it, I set the padding of the style to 0 (left padding). But I can still seeing some margin in it, and I need to have no margin in it? Does you know which would be the problem? <ListBox ItemsSource="{Binding Partitions}"> <ListBox.ItemsPanel> <ItemsPanelTemplate> <Canvas /> </ItemsPanelTemplate> </ListBox.ItemsPanel> <ListBox.ItemContainerStyle> <Style TargetType="ListBoxItem"> <Setter Property="Padding" Value="0"/> <Setter Property="Canvas.Top"> ... </Setter> </Style> </ListBox.ItemContainerStyle> I mean, I can see an extra space around the item and I can't handle it to modify to 0.

    Read the article

  • Iterating through Event Log Entry Collection, IndexOutOutOfBoundsException

    - by fjdumont
    Hello, in a service application I am iterating through the Windows application event log to parse Events in order react depanding on the entry message. In the case that the event log is full (Windows usually makes sure there is enough space by deleting old entries - this is configurable in the eventvwr.exe settings), the service always runs into an IndexOutOfBoundsException while iterating through the EventLog.Entries collection. No matter how I iterate (for-loop, using the collections enumerator, copying the collection into an array, ...), I can't seem to get rid of this ´bug´. Currently, I ensure that the log is not full in order to keep the service running by regularly deleting the last few item by parsing the event log file and deleting the last few nodes (Don't beat me up, I couldn't find a better alternative...). How can I iterate through the collection without trying to access already deleted entries? Is there probably a more elegant method? I am only trying to acces the logs written during the last x seconds (even LINQ failed to select those when the log is full - same exception), could this help? Thanks for any advice and hints Frank Edit: I forgot to mention that my assumption is the loops are accessing entries which are being deleted during iteration by Windows. Basically that is why I tried to clone the collection. Is there perhaps a way to lock the collection for a small amount of time for just my application?

    Read the article

  • JQuery error in IE, works with FF. Maybe a problem with live.

    - by olve
    Hello. I have an ASP.net MVC2 application. In wich I'm using JQuery to alter all table rows so I can click anywhere in any row to trigger a click event on a link in the clicked row. The tables is created using MVC's built in partialview ajax. Here is my JQuery script. <script type="text/javascript"> $(document).ready(function () { $('table tr').live('click',function (event) { $('#asplink', this).trigger('click'); }) .live('mouseenter',function (event) { this.bgColor = 'lightblue'; }) .live('mouseleave', function (event) { this.bgColor = 'white'; }); }); </script> And this is the first part of the partial view code that creates the table. <% foreach (var item in Model.JobHeaderData) { %> <tr> <td> <a id="asplink" href="http://localhost/sagstyring/EditJob.asp?JobDataID=<%: item.JobDataId %>&JobNumId=<%: item.JobNumID%>&JobNum=<%: item.JobNumID%>&DepId=1&User_Id=<%:ViewData["UserId"]%>" onclick="window.open(this.href,'Rediger sag <%: item.JobNumID %> ', 'status=0, toolbar=0, location=0, menubar=0, directories=0, resizeable=0, scrollbars=0, width=900, height=700'); return false;">Rediger</a> </td> In firefox this works perfectly. In IE, JQuery crashes when I click on a row. If I debug the page in IE. I get this. Out of stack space In jquery-1.4.1.js line 1822 // Trigger the event, it is assumed that "handle" is a function var handle = jQuery.data( elem, "handle" ); if ( handle ) { handle.apply( elem, data ); } I'm no eagle at javascript, so I'm pretty much stuck.

    Read the article

  • Moving to an arbitrary position in a file in Python

    - by B Rivera
    Let's say that I routinely have to work with files with an unknown, but large, number of lines. Each line contains a set of integers (space, comma, semicolon, or some non-numeric character is the delimiter) in the closed interval [0, R], where R can be arbitrarily large. The number of integers on each line can be variable. Often times I get the same number of integers on each line, but occasionally I have lines with unequal sets of numbers. Suppose I want to go to Nth line in the file and retrieve the Kth number on that line (and assume that the inputs N and K are valid --- that is, I am not worried about bad inputs). How do I go about doing this efficiently in Python 3.1.2 for Windows? I do not want to traverse the file line by line. I tried using mmap, but while poking around here on SO, I learned that that's probably not the best solution on a 32-bit build because of the 4GB limit. And in truth, I couldn't really figure out how to simply move N lines away from my current position. If I can at least just "jump" to the Nth line then I can use .split() and grab the Kth integer that way. The nuance here is that I don't just need to grab one line from the file. I will need to grab several lines: they are not necessarily all near each other, the order in which I get them matters, and the order is not always based on some deterministic function. Any ideas? I hope this is enough information. Thanks!

    Read the article

< Previous Page | 301 302 303 304 305 306 307 308 309 310 311 312  | Next Page >