Search Results

Search found 24624 results on 985 pages for 'linux rrt'.

Page 306/985 | < Previous Page | 302 303 304 305 306 307 308 309 310 311 312 313  | Next Page >

• Xen dom0 reports incorrect amount of RAM with dom0_mem set

  - by xen_amnesiac

  I've done a fair bit of searching about this, but have found nothing that answers my question. I have a system with 6GB of RAM which acts as a Xen server. For reference, it runs Ubuntu 12.04. I've set the kernel parameter dom0_mem:512M,max:512M in /etc/default/grub as follows: GRUB_CMDLINE_XEN_DEFAULT="dom0_mem=min:512M,max:512M" I've tried variations of that, with the same result. My question is this: With the above set, the dom0 reports in all applications a RAM amount of 422M. cat /proc/meminfo gives the following: $ cat /proc/meminfo MemTotal: 432472 kB MemFree: 54144 kB Buffers: 17640 kB Cached: 220104 kB SwapCached: 30172 kB Active: 136500 kB Inactive: 167780 kB Active(anon): 6156 kB Inactive(anon): 60516 kB Active(file): 130344 kB Inactive(file): 107264 kB Unevictable: 52 kB Mlocked: 52 kB SwapTotal: 1794044 kB SwapFree: 1682012 kB Dirty: 0 kB Writeback: 0 kB AnonPages: 39572 kB Mapped: 8048 kB Shmem: 136 kB Slab: 44324 kB SReclaimable: 22012 kB SUnreclaim: 22312 kB KernelStack: 1280 kB PageTables: 3840 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 2010280 kB Committed_AS: 329192 kB VmallocTotal: 34359738367 kB VmallocUsed: 313988 kB VmallocChunk: 34359417340 kB HardwareCorrupted: 0 kB AnonHugePages: 0 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 2048 kB DirectMap4k: 524696 kB DirectMap2M: 0 kB top, htop, free -m, and byobu's RAM monitor all report the same amount. At first I thought this was because of the onboard graphics borrowing some memory, but have now switched to a dedicated GPU and it persists. Is this normal behavior, or has something gone amiss? It's just about 100MB of RAM that's "gone", and I have no idea where it went. I understand that it's normal that not all RAM is available for allocation, but does the system really take an amount relatively high to the amount of RAM available?

  Read the article

• TFTP uploads failing

  - by dunxd

  I am running TFTPD via xinetd on a Centos 5.4 server. I am able to access files via tftp fine, so I know the service is running ok. However, whenever I try and upload a file I get a 0 Permission denied message. I have already created the file in /tftpboot and set the permissions to 666. My tftpd config has verbose logging (-vvvv), but all I see in my /var/log/messages is: START: tftp pid=20383 from=192.168.77.4 I have seen some mention that SELinux can prevent TFTPD uploads, but I'd expect to see something in the logs. I have SELinux set in permissive mode. Any ideas?

  Read the article

• EFI pxe network boot error

  - by Lee

  Asking this on both [serverfault][1] and [superuser][2]. When attempting to network boot RHEL 5.4 on an old ia64 machine I get the following error : ![alt text][3] So I've basically followed the tutorial here : [http://www-uxsup.csx.cam.ac.uk/pub/doc/suse/sles9/adminguide-sles9/ch04s03.html][4] DHCPD,TFTPD etc are already setup and working with standard x86 PXE clients. I've unpacked the boot.img file into /tftpboot/ia64/ and passed the path to the elilo.efi file via DHCP with the filename ""; option. Changing this filename generates a PXE file not found error (see below). So I assume that PXE has found the file... ![alt text][5] The only thing wrong I can find in the logs is : Jan 6 19:49:31 dhcphost in.tftpd[31379]: tftp: client does not accept options Any ideas? I'm sure I hit a problem like this a few years ago but I can't remember the fix :) Thanks in advance! Thanks in advance! [1]: http:// serverfault.com/questions/100188/ efi-pxe-network-boot-error [2]: http:// superuser.com/questions/92295/ efi-pxe-network-boot-error [3]: http:// i.imgur.com/Zx1Jy. png [4]: http:// www-uxsup.csx.cam.ac.uk/pub/doc/suse/sles9/adminguide-sles9/ch04s03.html [5]: http:// i.imgur.com/CEzGf. jpg

  Read the article

• CentOS will not boot. Error 13

  - by ipengineer

  I am having trouble with one of our CentOS servers. I migrated this server to XenServer, installed a new xen kernel, and performed a mkinitrd with: mkinitrd --omit-scsi-modules --with=xennet --with=xenblk --preload=xenblk initrd-2.6.18-308.4.1.el5xen-no-scsi.img 2.6.18-308.4.1.el5xen Now I am getting an error 13 on boot. Screenshot: http://postimage.org/image/k7js0l41v/ I can still boot with the PAE kernel. Does anyone have any idea on how to resolve this? My Grub file looks like: default=0 timeout=5 splashimage=(hd0,0)/grub/splash.xpm.gz hiddenmenu title CentOS (2.6.18-308.4.1.el5xen) root (hd0,0) kernel /vmlinuz-2.6.18-308.4.1.el5xen ro root=/dev/hdb1 ramdisk_size=256000 initrd /initrd-2.6.18-308.4.1.el5xen-no-scsi.img title CentOS (2.6.18-308.4.1.el5PAE) root (hd0,0) kernel /vmlinuz-2.6.18-308.4.1.el5PAE ro root=/dev/hdb1 ramdisk_size=256000 initrd /initrd-2.6.18-308.4.1.el5PAE.img title CentOS (2.6.18-274.17.1.el5PAE) root (hd0,0) kernel /vmlinuz-2.6.18-274.17.1.el5PAE ro root=/dev/hdb1 ramdisk_size=256000 initrd /initrd-2.6.18-274.17.1.el5PAE.img

  Read the article

• PXE booting LACP hosts on Force10 S50N with FTOS

  - by lolwutreddit

  Hardware: S50N Firmware: FTOS 8.4.2.6 Problem: We're trying to PXE boot some servers that are connected via port-channel interfaces with LACP. Current Work-around: we PXE boot a server with a single interface (eth0), and then use a Perl script to turn up the port-channel interfaces after the server is built. Details: Is anyone doing anything similar on Force10 S50 switches with FTOS? If not, is anyone doing this on another S series, or larger chassis-based Force10? I'm wondering if Native VLAN will solve this, since ports in a port-channel cannot explicitly have a VLAN set, and they don't seem to use the tagged or untagged VLAN that the port channel is in. I will confirm this next (I think it's the only thing I haven't tried) Juniper Example: http://broken.net/openindiana/how-to-pxe-boot-systems-on-lacp-using-juniper-switches/ Cisco: there are plenty of documented ways to solve this issue on IOS and Nexus Update/Edit: since there seems to be no way to use interface or port-channel mode commands to get the individual interfaces to show up in spanning-tree (rtsp in this case), the ports should never go into a forwarding state. I'm not going to mess with it anymore unless a) someone that has experience passes it on, or b) Force10 comes up with a solution for this (I'm guessing it will only be introduced on other S platforms (S55, S60), since the S50 seems to be near EOL). I'm basing that on the fact that the Open Automation type features are only being supported on the newer switches.

  Read the article

• Is there a way to change the GTK theme for applications run as superuser on KDE?

  - by Patches

  When I run GTK applications on KDE, they use the QtCurve theme that matches my color and font scheme as configured in the KDE System Settings application. However GTK applications run as superuser use the old default GNOME, regardless of whether I run them with kdesudo, gksudo, or sudo on a terminal. For example, here's gedit run as superuser on top, and under my normal user account on the bottom: Strangely, KDE applications run with kdesudo display the default Oxygen styling but use my settings when run with sudo on a terminal. Is there any way to configure the stying GTK applications use when run as superuser on KDE?

  Read the article

• Logrotate not doing any rotation

  - by blizz

  I just set up LogRotate on my RHEL6 server so that it rotates my custom Apache log files. However, it doesn't do anything when i try manually running it. I expect it to rotate the log files "access.log" and "err.log". They have been there for a few days and need to be rotated. Here is the output: [root@pc1 httpd]# logrotate -d -f /etc/logrotate.d/apache reading config file /etc/logrotate.d/apache reading config info for /var/log/httpd/*log /var/www/html/NSLogs/access.log /var/www/html/NSErrorLogs/err.log Handling 1 logs rotating pattern: /var/log/httpd/*log /var/www/html/NSLogs/access.log /var/www/html/NSErrorLogs/err.log forced from command line (no old logs will be kept) empty log files are rotated, old logs are removed considering log /var/log/httpd/access_log log needs rotating considering log /var/log/httpd/error_log log needs rotating considering log /var/www/html/NSLogs/access.log log needs rotating considering log /var/www/html/NSErrorLogs/err.log log needs rotating rotating log /var/log/httpd/access_log, log->rotateCount is 0 dateext suffix '-20131023' glob pattern '-[0-9][0-9][0-9][0-9][0-9][0-9][0-9][0-9]' glob finding old rotated logs failed fscreate context set to unconfined_u:object_r:httpd_log_t:s0 renaming /var/log/httpd/access_log to /var/log/httpd/access_log-20131023 disposeName will be /var/log/httpd/access_log-20131023.gz running postrotate script running script with arg /var/log/httpd/access_log: " /usr/bin/killall -HUP httpd " compressing log with: /bin/gzip removing old log /var/log/httpd/access_log-20131023.gz error: error opening /var/log/httpd/access_log-20131023.gz: No such file or directory rotating log /var/log/httpd/error_log, log->rotateCount is 0 dateext suffix '-20131023' glob pattern '-[0-9][0-9][0-9][0-9][0-9][0-9][0-9][0-9]' glob finding old rotated logs failed fscreate context set to unconfined_u:object_r:httpd_log_t:s0 renaming /var/log/httpd/error_log to /var/log/httpd/error_log-20131023 disposeName will be /var/log/httpd/error_log-20131023.gz running postrotate script running script with arg /var/log/httpd/error_log: " /usr/bin/killall -HUP httpd " compressing log with: /bin/gzip removing old log /var/log/httpd/error_log-20131023.gz error: error opening /var/log/httpd/error_log-20131023.gz: No such file or directory rotating log /var/www/html/NSLogs/access.log, log->rotateCount is 0 dateext suffix '-20131023' glob pattern '-[0-9][0-9][0-9][0-9][0-9][0-9][0-9][0-9]' glob finding old rotated logs failed fscreate context set to unconfined_u:object_r:httpd_sys_rw_content_t:s0 renaming /var/www/html/NSLogs/access.log to /var/www/html/NSLogs/access.log-20131023 disposeName will be /var/www/html/NSLogs/access.log-20131023.gz running postrotate script running script with arg /var/www/html/NSLogs/access.log: " /usr/bin/killall -HUP httpd " compressing log with: /bin/gzip removing old log /var/www/html/NSLogs/access.log-20131023.gz error: error opening /var/www/html/NSLogs/access.log-20131023.gz: No such file or directory rotating log /var/www/html/NSErrorLogs/err.log, log->rotateCount is 0 dateext suffix '-20131023' glob pattern '-[0-9][0-9][0-9][0-9][0-9][0-9][0-9][0-9]' glob finding old rotated logs failed fscreate context set to unconfined_u:object_r:httpd_sys_rw_content_t:s0 renaming /var/www/html/NSErrorLogs/err.log to /var/www/html/NSErrorLogs/err.log-20131023 disposeName will be /var/www/html/NSErrorLogs/err.log-20131023.gz running postrotate script running script with arg /var/www/html/NSErrorLogs/err.log: " /usr/bin/killall -HUP httpd " compressing log with: /bin/gzip removing old log /var/www/html/NSErrorLogs/err.log-20131023.gz error: error opening /var/www/html/NSErrorLogs/err.log-20131023.gz: No such file or directory

  Read the article

• do i need a dns server?

  - by ajsie

  i have set up a website (lamp) in a vps from a hosting company. im wondering, in what circumstances would i want to set up a dns server on my vps? cause from what i have learned basically a dns just converts domain names into ip addresses. and at the moment my domain provider is doing this in their dns. so in what situations do i benefit from setting up an own dns server?

  Read the article

• iptables DNS resolution

  - by Favolas

  I have a virtual machine with Fedora 19 acting as a router. This machine as an interface (p8p1) with the IP 172.16.1.254 that is connected to another machine (IP 172.16.1.1) that's simulating the external network. I've installed snort 2.9.2.2, applied the snortsam-2.9.2.2.diff.gz patch and installed snortsam 2.70 on the routermachine In snort.conf besides altering some RULE_PATH I believe I've only added the following line to the file. output alert_fwsam: 127.0.0.1:898/password After doing this two comands: ifconfig p8p1 promisc /usr/local/snort/bin/snort -v -i p8p1 If I ping from the external network to the router IP, I can see the info about the pings. One of the rules that I have is icmp-info.rules that as this single line: alert icmp $EXTERNAL_NET any -> $HOME_NET any (msg:"ICMP-INFO Echo Reply"; icode:0; itype:0; classtype:misc-activity; sid:408; rev:6;fwsam: src, 5 minutes;) snortsam.conf as this data: defaultkey password accept localhost keyinterval 30 minutes dontblock 192.168.1.1 # rede local rollbackhosts 50 rollbackthreshold 20 / 30 secs rollbacksleeptime 1 minute logfile /var/log/snort/snortsam.log loglevel 3 daemon nothreads # linha importante para gerar os bloqueios via iptables iptables p8p1 LOG bindip 127.0.0.1 Now I run this command: /usr/local/snort/bin/snort -u snort -i p8p1 -c /etc/snort/snort.conf -l /var/log/snort -Dq Terminal gives this message: Spawning daemon child... My daemon child 2080 lives... Daemon parent exiting (0) and when I runsnortsam in terminal i got this: SnortSam, v 2.70. Copyright (c) 2001-2009 Frank Knobbe . All rights reserved. Plugin 'fwsam': v 2.5, by Frank Knobbe Plugin 'fwexec': v 2.7, by Frank Knobbe Plugin 'pix': v 2.9, by Frank Knobbe Plugin 'ciscoacl': v 2.12, by Ali Basel <[email protected]> Plugin 'cisconullroute': v 2.5, by Frank Knobbe Plugin 'cisconullroute2': v 2.2, by Wouter de Jong <[email protected]> Plugin 'netscreen': v 2.10, by Frank Knobbe Plugin 'ipchains': v 2.8, by Hector A. Paterno <[email protected]> Plugin 'iptables': v 2.9, by Fabrizio Tivano <[email protected]>, Luis Marichal <[email protected]> Plugin 'ebtables': v 2.4, by Bruno Scatolin <[email protected]> Plugin 'watchguard': v 2.7, by Thomas Maier <[email protected]> Plugin 'email': v 2.12, by Frank Knobbe Plugin 'email-blocks-only': v 2.12, by Frank Knobbe Plugin 'snmpinterfacedown': v 2.3, by Ali BASEL <[email protected]> Plugin 'forward': v 2.8, by Frank Knobbe Parsing config file /etc/snortsam.conf... Linking plugin 'iptables'... Checking for existing state file "/var/db/snortsam.state". Found. Reading state file. Starting to listen for Snort alerts. and snortsam.log as an entry like this 2013/10/25, 10:15:17, -, 1, snortsam, Starting to listen for Snort alerts. Now, from the external machine I do ping 172.16.1.254 and it starts showing the info and an alert file is created in /var/log/snort/ that as the info about the PINGS. Something like: [**] [1:408:6] ICMP-INFO Echo Reply [**] [Classification: Misc activity] [Priority: 3] 10/25-10:35:16.061319 172.16.1.254 -> 172.16.1.1 ICMP TTL:64 TOS:0x0 ID:38720 IpLen:20 DgmLen:84 Type:0 Code:0 ID:1389 Seq:1 ECHO REPLY Also, if I run instead /usr/local/snort/bin/snort snort -v -i p8p1 i got this message: Running in packet dump mode --== Initializing Snort ==-- Initializing Output Plugins! Snort BPF option: snort pcap DAQ configured to passive. The DAQ version does not support reload. Acquiring network traffic from "p8p1". ERROR: Can't set DAQ BPF filter to 'snort' (pcap_daq_set_filter: pcap_compile: syntax error)! Fatal Error, Quitting.. So, this are my questions: Shouldn't snortsam block the PING? Is that DAQ error causing the problem? If so, How can I solve it?

  Read the article

• Can connect to Samba server but cannot access shares?

  - by jlego

  I have setup a stand-alone box running Fedora 16 to use as a file-sharing and web development server. Needs to be able to share files with a PC running Windows 7 and a Mac running OSX Snow Leopard. I've setup Samba using the Samba configuration GUI tool. Added users to Fedora and connected them as Samba users (which are the same as the Windows and Mac usernames and passwords). The workgroup name is the same as the Windows workgroup. Authentication is set to User. I've allowed Samba and Samba client through the firewall and set the ethernet to a trusted port in the firewall. Both the Windows and Mac machines can connect to the server and view the shares, however when trying to access the shares, Windows throws error 0x80070035 " Windows cannot access \SERVERNAME\ShareName." Windows user is not prompted for a username or password when accessing the server (found under "Network Places"). This also happens when connecting with the IP rather than the server name. The Mac can also connect to the server and see the shares but when choosing a share gives the error "The original item for ShareName cannot be found." When connecting via IP, the Mac user is prompted for username and password, which when authenticated gives a list of shares, however when choosing a share to connect to, the error is displayed and the user cannot access the share. Since both machines are acting similarly when trying to access the shares, I assume it is an issue with how Samba is configured. smb.conf: [global] workgroup = workgroup server string = Server log file = /var/log/samba/log.%m max log size = 50 security = user load printers = yes cups options = raw printcap name = lpstat printing = cups [homes] comment = Home Directories browseable = no writable = yes [printers] comment = All Printers path = /var/spool/samba browseable = yes printable = yes [FileServ] comment = FileShare path = /media/FileServ read only = no browseable = yes valid users = user1, user2 [webdev] comment = Web development path = /var/www/html/webdev read only = no browseable = yes valid users = user1 How do I get samba sharing working? UPDATE: Before this box I had another box with the same version of fedora installed (16) and samba working for these same computers. I started up the old machine and copied the smb.conf file from the old machine to the new one (editing the share definitions for the new shares of course) and I still get the same errors on both client machines. The only difference in environment is the hardware and the router. On the old machine the router received a dynamic public IP and assigned dynamic private IPs to each device on the network while the new machine is connected to a router that has a static public IP (still dynamic internal IPs though.) Could either one of these be affecting Samba? UPDATE 2: As the directory I am trying to share is actually an entire internal disk, I have tried to things: 1.) changing the owner of the mounted disk from root to my user (which is the same username as on the Windows machine) 2.) made a share that only included one of the folders on the disk instead of the entire disk with my user again as the owner. Both tests failed giving me the same errors regarding the network address. UPDATE 3: Not sure exactly what I did, but now whenever I try to connect to the share on the Windows 7 client I am prompted for my username and password. When I enter the correct credentials I get an access denied message. However I did notice that under the login box "domain: WINDOWS-PC-NAME" is listed. I believe this could very well be the problem. Any suggestions? UPDATE 4: So I've completely reinstalled Fedora and Samba now. I've created a share on the first harddrive (one fedora is installed on) and I can access that fine from Windows. However when I try to share any data on the second disk, I am receiving the same error. This I believe is the problem. I think I need to change some things in fstab or fdisk or something. UPDATE 5: So in fstab I mapped the drive to automount in a folder which works correctly. I also added the samba_share_t SElinux label to the mountpoint directory which now allows me to access the shares on the Windows machine, however I cannot see any of the files in the directory on the windows machine. (They are there, I can see them in the fedora file browser locally) UPDATE 6: Figured it out. See answer below

  Read the article

• Limit Apache 2 Memory Usage

  - by UltraNurd

  I am running a hobby webserver off of an ancient Blue & White G3/300 running Debian PPC Squeeze 2.6.30. The performance is okay for a while after a restart, but it eventually gets more and more bogged down. Right now it's at 76 days uptime, and the main culprit seems to be the memory usage of 10+ apache2 processes. I think I need to lower the values for StartServers, MinSpareServers, and/or MaxSpareServers, but I'm not sure which one to adjust, and there are three sections for each depending on which mpm module is in use. How do I tell which of the following sections I need to change, and what are some reasonable values given that the box has 448 MB physical memory (weird upgrade history of one each 64, 128, and 256 sticks)? <IfModule mpm_prefork_module> StartServers 5 MinSpareServers 5 MaxSpareServers 10 MaxClients 150 MaxRequestsPerChild 0 </IfModule> <IfModule mpm_worker_module> StartServers 2 MinSpareThreads 25 MaxSpareThreads 75 ThreadLimit 64 ThreadsPerChild 25 MaxClients 150 MaxRequestsPerChild 0 </IfModule> <IfModule mpm_event_module> StartServers 2 MaxClients 150 MinSpareThreads 25 MaxSpareThreads 75 ThreadLimit 64 ThreadsPerChild 25 MaxRequestsPerChild 0 </IfModule> There aren't any other instances of StartServers in my apache2.conf, but none of those mpm modules appear in mods-available or mods-enabled. Ideas? Thanks!

  Read the article

• Install 64-bit Ubuntu or 32-bit?

  - by nitbuntu

  I'll be receiving a new notebook in a few days and was planning on running Ubuntu on it as it's compatible and the notebook has no OS pre-installed. The specifications are: Core 2 Duo, T6600, 4 GB RAM, Intel integrated graphics. I know a year or two ago, running a 64-bit version of Ubuntu was not advised due to much of the applications and plugins (e.g. Flash) only running on 32-bit. Is this still the case? Would I get better performance with 64-bit Ubuntu since I have 4 GB of RAM? Are there any downsides anymore?

  Read the article

• multiple php compiler on single apache installation

  - by getmizanur

  elloo, i have some old php scripts which runs on php-5.2.x and the current server has php-5.3.x. to get around this problem,i have got two options one is to downgrade php-5.3.x or install php-5.2.x and php-5.3.x at the same time where php-5.2.x serve cgi script. i have decided go for the second option i have followed this tutorial and i can get most of it working however except execution of shell script which selects php-cgi version. i cannot get apache to execute this script. how do i get apache to execute #!/bin/sh # you can change the PHP version here. version="5.2.6" # php.ini file location, */php-5.2.6/lib equals */php-5.2.6/lib/php.ini. PHPRC=/etc/php/phpfarm/inst/php-${version}/lib/php.ini export PHPRC PHP_FCGI_CHILDREN=3 export PHP_FCGI_CHILDREN PHP_FCGI_MAX_REQUESTS=5000 export PHP_FCGI_MAX_REQUESTS # which php-cgi binary to execute exec /etc/php/phpfarm/inst/php-${version}/bin/php-cgi my apache vhost.conf <VirtualHost *:80> ServerName 526.localhost DocumentRoot /home/getmizanur/public_html/www <Directory "/home/getmizanur/public_html/www"> AddHandler php-cgi .php Action php-cgi /php-fcgi/php-cgi-5.2.6 </Directory> </VirtualHost> can some one tell me what am i doing wrong? thanks in advance. solution: if i did a2dismod php5 then the above configuration worked. when a2enmod php5 had been activated, apache was executing php5.3 instead of php5.2 even after telling apache to execute php5.2 shell script. to solve my problem, i had to change my virtualhost configuration <VirtualHost *:80> ServerName 526.localhost DocumentRoot /home/getmizanur/public_html/www DirectoryIndex index.php <Directory "/home/getmizanur/public_html/www"> AddHandler php-cgi .php Action php-cgi /php-fcgi/php-cgi-5.2.6 <FilesMatch "\.php"> SetHandler php-cgi </FilesMatch> </Directory> </VirtualHost> presto, it started working.

  Read the article

• CentOS only detecting 50% of ram

  - by Devator

  I have 16GB ram in my machine. Before, free -m outputted the normal 16 GB ram, however now (after a reboot) it only detects 8 GB ram. Is one ram module damaged? grep -i memory /var/log/dmesg outputs Memory: 15621184k/16017200k available (2535k kernel code, 387120k reserved, 1748k data, 196k init). (Which looks like 16 GB to me). Free -m outputs: total used free shared buffers cached Mem: 7484 7415 68 0 6104 524 -/+ buffers/cache: 786 6697 Swap: 2055 0 2054 Anything I might be missing? Thanks in advance.

  Read the article

• Selinux interfering with vboxwebsrv or phpvirtualbox

  - by Mike W

  I have a brand new installation of Fedora 18, with a brand new installation of Virtualbox 4.2. I have spent a painful few hours trying to get phpVirtualBox working. Apache 2.4 and PHP 5.4 are installed, along with the phpVirtualBox software. Attempting to access phpVirtualBox allowed me to login, but then I'd have a prolonged wait until an 'Error fetching HTTP headers' message appeared. Finally, I set SeLinux to permissive, and Bingo! things start to work. For some reason the SeLinux Troubleshooter isn't flagging any messages from SeLinux, I don't know what to look for now. This is a development box so I could leave SeLinux set to permissive but I will need to make this work in anger on the next project. My question, then, is this: What changes to SeLinux policies do I need to make to allow phpVirtualBox and vboxwebsrv to work together? If there's more information I can post that will assist I'll gladly post it - just let me know what it is.

  Read the article

• How do I surround a line with quotes on bash?

  - by obvio171

  When I run for i in $(find -name '*.ogg'); do echo '$i'; done I don't get one line per file as I expected. Instead, when a file name has a space in it, each word comes out in a separate line, so I can't run commands on the files.

  Read the article

• If I'm a web server, for which accounts can I turn off shells within passwd file?

  - by eric01

  I am making a web server running LAMP and want to access it using SSH. When I open the passwd file, I see all those accounts and I want to know for which ones I can put false. I have the following accounts: root, daemon, bin, sys, sync, games, man, lp, mail, news, uucp, proxy, www-data backup, list, irc, gnats, nobody, libuuid, syslog, messagebus, whoopsie, mandscape, sshd, eric Except root, sshd and eric, which ones should I not disable? How about www-data and sshd? Thanks a lot for your help.

  Read the article

• Run script before shutdown/restart

  - by dtbarne

  I'd like to run a PHP script when an instance is told to shutdown, but of course before it actually finishes shutting down. My particular script is just looking to push some log files from the local partition to a another server. I've got the gist of how this process works, but I need some clarification. How I understand it. Please correct me if I'm wrong. Create an executable script in /etc/init.d (lets call it /etc/init.d/push-logs) Create a symlink to /etc/init.d/push-logs from /etc/rc0.d (shutdown) and /etc/rc6.d (reboot). The name should be KXXpush-logs Here's my questions: Of course - am I understanding correctly? For #2 above - it sounds like the lower the XX the better - is there too low a number I can use? Does it matter if it shares a number with another script? Does the script in /etc/init.d/push-logs HAVE to follow the standard init.d template (supporting start/stop, etc. commands)? This doesn't really apply to my use case. If possible I just want the script to be the following: #!/bin/sh # # Run PHP file prior to shutdown # /usr/bin/php /path/to/php_file.php

  Read the article

• Explanation for kernel error - Eeeek! page_mapcount went negative

  - by Aditya Advani

  Internet says this is a genuine Kernel Bug but does anyone know what triggers it?? Server running CentOS x86_64 with kernel 2.6.27.24 Here is my crash output: [root@u15345757 httpdocs]# Message from syslogd@ at Thu Aug 6 01:42:22 2009 ... u15345757 kernel: [1145736.506380] Eeek! page_mapcount(page) went negative! (-1) Message from syslogd@ at Thu Aug 6 01:42:22 2009 ... u15345757 kernel: [1145736.517515] page pfn = d0a3 Message from syslogd@ at Thu Aug 6 01:42:22 2009 ... u15345757 kernel: [1145736.523814] page->flags = 10000000000083c Message from syslogd@ at Thu Aug 6 01:42:22 2009 ... u15345757 kernel: [1145736.532489] page->count = 2 Message from syslogd@ at Thu Aug 6 01:42:22 2009 ... u15345757 kernel: [1145736.538741] page->mapping = ffff88001f01a110 Message from syslogd@ at Thu Aug 6 01:42:22 2009 ... u15345757 kernel: [1145736.547924] vma->vm_ops = 0x0 Message from syslogd@ at Thu Aug 6 01:42:22 2009 ... u15345757 kernel: [1145736.554543] [ cut here ] Message from syslogd@ at Thu Aug 6 01:42:23 2009 ... u15345757 kernel: [1145736.564528] invalid opcode: 0000 [1] SMP Message from syslogd@ at Thu Aug 6 01:42:23 2009 ... u15345757 kernel: [1145736.564528] Code: 80 e8 22 51 fd ff 48 8b 85 90 00 00 00 48 85 c0 74 19 48 8b 40 20 48 85 c0 74 10 48 8b 70 58 48 c7 c7 10 7f 7d 80 e8 fd 50 fd ff <0f> 0b eb fe 8b 77 18 41 58 5b 5d 83 e6 01 f7 de 83 c6 04 e9 df Broadcast message from root (pts/3) (Thu Aug 6 01:49:29 2009): The system is going down for reboot NOW!

  Read the article

• MySQL - Why would SHOW SLAVE HOSTS cause a binlog dump?

  - by Rory McCann

  We're getting loads of binlog files in our MySQL 5.0.x. We have a normal master/slave replication thing going with 1 master, 1 slave. Looking at /var/log/mysql.log, nearly 90% of the time the replicator connects and does a SHOW SLAVE HOSTS causes a bin log dump. For example: 7020 Query SHOW SLAVE HOSTS 7020 Binlog Dump Log: 'mysql-bin.029634' Pos: 13273 However when I do a SHOW SLAVE HOSTS on the mysql myself, I get no results. Occasionally when the replicator does a SHOW SLAVE HOSTS, mysql will hang for hours. I see nothing in the /var/log/syslog at the same time... What's going on here? How can I debug this more? For the record the MySQL master and slave servers are ubuntu dapper.

  Read the article

• VMware Server 2.0.2 and Firefox 3.6 RC1

  - by Mads

  Hi, it seems that VMware Server 2.0.2 and Firefox 3.6 RC1 don't like each other. I have a reproducible problem on different networks, each with same software configuration (FF3.6 RC1 and VMware Server 2.0.2 on Ubuntu 8.04.3 LTS 64bit). The login screen doesn't show up and the Firefox remarks and non loadable page. It cannot load the page at all. The redirect is done (from http://:8222 to https://:8333 ) Maybe someone can help?

  Read the article

• Cannot run a VM with more than three network interfaces with KVM

  - by Bostonvaulter

  I'm running KVM on top of Ubuntu 10.10 Server I can create VM's (Virtual Machine) and network interfaces fine but I cannot seem to add more than three network interfaces. As soon as I have a VM with four network interfaces it gets stuck on startup at the starting SeaBIOS page with this message: Starting SeaBIOS (version pre-0.6.1-20100702_143500-palmer) So far I've verified this with two VM's, a Ubuntu 10.10 desktop and a Vyatta router. The specific network hardware I assign to the VM's doesn't seem to matter. I'm trying to have one bridged interface and three private networks using Vyatta to route between them. Does anyone know why I can't run a VM with more than three network interfaces? Edit: Additionally the KVM thread responsible for the specific VM hangs using ~100% CPU (i.e. one core). Here's the command for the process that is hanging: /usr/bin/kvm -S -M pc-0.12 -enable-kvm -m 512 -smp 1,sockets=1,cores=1,threads=1 -name vyatta -uuid 6dff7c94-6810-423e-5fea-fec10da0e9b7 -nodefaults -chardev socket,id=monitor,path=/var/lib/libvirt/qemu/vyatta.monitor,server,nowait -mon chardev=monitor,mode=readline -rtc base=utc -boot c -drive file=/home/rams/virtual-machines/vyatta.img,if=none,id=drive-ide0-0-0,boot=on,format=raw -device ide-drive,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0 -drive if=none,media=cdrom,id=drive-ide0-1-0,readonly=on,format=raw -device ide-drive,bus=ide.1,unit=0,drive=drive-ide0-1-0,id=ide0-1-0 -device rtl8139,vlan=0,id=net0,mac=00:54:00:be:cc:4b,bus=pci.0,addr=0x3 -net tap,fd=97,vlan=0,name=hostnet0 -device rtl8139,vlan=1,id=net1,mac=52:54:00:da:59:ed,bus=pci.0,addr=0x5 -net tap,fd=98,vlan=1,name=hostnet1 -device rtl8139,vlan=2,id=net2,mac=52:54:00:ce:22:b6,bus=pci.0,addr=0x6 -net tap,fd=99,vlan=2,name=hostnet2 -device rtl8139,vlan=3,id=net3,mac=52:54:00:1e:bc:46,bus=pci.0,addr=0x7 -net tap,fd=101,vlan=3,name=hostnet3 -chardev pty,id=serial0 -device isa-serial,chardev=serial0 -usb -vnc 127.0.0.1:0 -k en-us -vga cirrus -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x4 Edit: I've also found an error in dmesg that might be related (it also shows up when running virtd in verbose mode): 14:47:24.399: warning : qemudParsePCIDeviceStrs:1422 : Unexpected exit status '1', qemu probably failed I've also tried disabling app armor but that doesn't seem to make a difference.

  Read the article

• Gluster bricks are offline and errors in logs

  - by Roman Newaza

  I have substituted all the IP addresses with hostnames and renamed configs (IP to hostname) in /var/lib/glusterd by my shell script. After that I restarted Gluster Daemon and the volume. Then I checked if all the peers are connected: root@GlusterNode1a:~# gluster peer status Number of Peers: 3 Hostname: gluster-1b Uuid: 47f469e2-907a-4518-b6a4-f44878761fd2 State: Peer in Cluster (Connected) Hostname: gluster-2b Uuid: dc3a3ff7-9e30-44ac-9d15-00f9dab4d8b9 State: Peer in Cluster (Connected) Hostname: gluster-2a Uuid: 72405811-15a0-456b-86bb-1589058ff89b State: Peer in Cluster (Connected) I could see mounted volumes size change on all the nodes when I execute df command, so new data is coming. But recently I noticed error messages in app log: copy(/storage/152627/dat): failed to open stream: Structure needs cleaning readfile(/storage/1438227/dat): failed to open stream: Input/output error unlink(/storage/189457/23/dat): No such file or directory Finally, I have found out some bricks are offline: root@GlusterNode1a:~# gluster volume status Status of volume: storage Gluster process Port Online Pid ------------------------------------------------------------------------------ Brick gluster-1a:/storage/1a 24009 Y 1326 Brick gluster-1b:/storage/1b 24009 N N/A Brick gluster-2a:/storage/2a 24009 N N/A Brick gluster-2b:/storage/2b 24009 N N/A Brick gluster-1a:/storage/3a 24011 Y 1332 Brick gluster-1b:/storage/3b 24011 N N/A Brick gluster-2a:/storage/4a 24011 N N/A Brick gluster-2b:/storage/4b 24011 N N/A NFS Server on localhost 38467 Y 24670 Self-heal Daemon on localhost N/A Y 24676 NFS Server on gluster-2b 38467 Y 4339 Self-heal Daemon on gluster-2b N/A Y 4345 NFS Server on gluster-2a 38467 Y 1392 Self-heal Daemon on gluster-2a N/A Y 1402 NFS Server on gluster-1b 38467 Y 2435 Self-heal Daemon on gluster-1b N/A Y 2441 What can I do about that? I need to fix it. Note: CPU and Network usage of all the four nodes are about the same.

  Read the article

• running vmstat around a command

  - by svrist

  Im trying to automate a long list of database experiments. I would like to save vmstat output while specific parts of the experiments are running. Does something exist along the lines of time(1) or script(1) that I could use to say: " While this command is running, save vmstat 2(or similar) output to a file " I am aware that vmstat gives my vmstat for the complete system including other processes, but that is OK for my usage. (Running Ubuntu 9.10 if that makes a difference)

  Read the article

• find files where group permissions equal user permissions

  - by Jayen

  Is it possible to do something like find -perm g=u? I say "like" because -perm mode requires mode to specify all the bits, not just g, and because I can't put u on the right side of the =, like I can with the chmod command: you can specify exactly one of the letters ugo: the permissions granted to the user who owns the file (u), the permissions granted to other users who are members of the file's group (g), and the permissions granted to users that are in neither of the two preceding categories (o). At the moment, I'm doing find | xargs -d \\n ls -lartd | egrep '^.(...)\1 which is just ugly. Thanks.

  Read the article

< Previous Page | 302 303 304 305 306 307 308 309 310 311 312 313  | Next Page >