Search Results

Search found 10121 results on 405 pages for 'video concatenation'.

Page 306/405 | < Previous Page | 302 303 304 305 306 307 308 309 310 311 312 313  | Next Page >

  • Windows 7 x64 Hard Freezing (again)

    - by Lanissum
    Awhile ago, my computer was randomly freezing a few minutes after booting, and I ended up replacing the CPU and mobo after testing the RAM and hard drive, I also couldn't find anything wrong with the video card. So after replacing the presumably faulty hardware, everything worked fine for about a month and a half. All of a sudden, My computer is randomly freezing a few minutes after loading up any intensive application (games, mostly). Most of the time it just freezes with the current frame until I hard reset, although once it printed a BSOD message stating that dxgmms1.sys was to blame. The only difference between these two episodes I can think of is that I can do word/internet/work without issue now, as opposed to the near uselessness my computer was rendered last time. For those of you who want to know, I tested my memory with memtest86 (for 64 bit machines). I can't figure out what could have started this latest round of issues, the event logger just states that a kernel-power event has occurred (like last time) but I think thats just a generic "this machine has rebooted after a sudden shutdown" message.

    Read the article

  • VM: Windows 7 host, Linux guest, VT-d?

    - by chx
    I am sick of the driver issues of Linux. So I am planning to switch to Windows 7 as a host and virtualize my Linux into it. My laptop has integrated Intel graphics and supports VT-d. For speed reasons I would like to assign that card to Linux. Now, Parallels could do it but this page says Note: If you have only one PCIe video adapter, its name will be grayed out in the PCI Devices list and you will not be able to allocate it to your virtual machines. I would be perfectly fine with a headless Windows 7 (I can remotely admin from other computers or just the Linux guest) -- is there any VM software that doesn't have this restriction?

    Read the article

  • Graphic Setup tune-up checklist

    - by Click Ok
    I was trying to play the game Warzone 2100 and the games runs fine, with nice speed, but the screen stays with a horizontal lines "flickering"... My PC have a integrated GeForce Go 6100 vga. Ok, not a powerfull vga, but it's not the end of the world to run a "simple" game like this (compared with another games that ask you send your eyes to purchase a expensive vga). So, I think that the problem can be of the configuration of my machine. I use it in first instance for programming jobs, so I underpay attention to video setup. I would like about a checklist to know if my PC is "ready" to games. By example, I know that I need: Lastest vga drivers Updated DirectX and OpenGL What you suggest? There is too some good programs to test performance and suggests improvements in the system? Thank you! PS: I'm using Windows 7

    Read the article

  • Samsung TV connected to PC for Powerpoint

    - by Skaughty
    I have a 42" Samsung LCD TV connected to a Dell computer with a PCI Radion 9000 via a 35' VGA cable. It's purpose is to run power point presentations over the TV for our retail store. I have tried every combination of button clicking on the video card options, and everything on the TV, and I still get black bars on the top and bottom of the image. It looks like I am watching a old wide screen movie on a full screen TV. The TV's suggested resolution is 1024x768, and that is what the output is set to. I have tried this with a nVida PCI card as well with the same results.

    Read the article

  • Automatically copy files out of directory

    - by wizard
    I had a user's laptop stolen recently during shipping and it was setup with windows live sync. The thief or buyer's kids took some photos of themselves and they were synced to the user's my documents. I had just finished moving the users files out of the synced my documents folder when I noticed this. Later they took some more photos and a video. I wrote up a batch script to copy files out synced directory every 5 minutes into a dated directory. In the end I ended up with a lot of copies of the same few files. Ignoring what windows livesync offers (at the time there was no way to undelete files - I've moved onto dropbox so this ins't really an issue for me) what's the best way to preserve changes and files from a directory? I'm interested in windows solutions but if you know of a good way on a *nix please go ahead and share.

    Read the article

  • better media player than vlc with a real library [closed]

    - by elluca
    hi i have been using VLC for years. but my library of movies is growing an i would like to have a better management of them. sure, i could use itunes for that. but i really hat quicktime. the UI is even worse than the one windows media player got. i looked at winamp, windows media player and songbird. but none has got a UI comparable to VLC. the most important feature: hotkeys. i want to be able to skip in a video using the mouse scroll wheel. do i have to code one myself? ;) thanks lukas

    Read the article

  • Nvidia 8600 GT drivers Will not run setup

    - by Zeno
    I am attempting to upgrade my video card drivers with my nvidia 8600 gt. I downloaded the drivers from NVIDIA and when I run the setup, nothing happens. It does appear in the Processes, but never does anything. I've tried restarting, tried killing the process and re-running, I am an admin account... nothing works. What is wrong? [EDIT] The installer does run, it extracts the setup files to C:\NVIDIA as normal then when it tries to run that setup to do the actual install, nothing happens (the process does show up in Task Manager and just sits there). Attempting to run the installer manually via C:\NVIDIA\DisplayDriver\296.10\WinXP\English\Setup.exe has the process open, but nothing happens. This machine is WinXP 32bit.

    Read the article

  • How to fix Ubuntu 10.10 black screen from terminal?

    - by none
    I'm trying to install Ubuntu Desktop 10.10 on an Intel Atom mainboard (Intel D945GCLF2) with CRT that has been running Ubuntu 9.x previously. Both, Desktop live CD / installer and alternate install CD cause the screen to go black (and the status LED blinks). I was able to get a bit further into the boot process with nomodeset as parameter with the Live CD, unfortunately I can't pass GRUB any parameters now that I have used the alternate Install CD by pressing 'e', it just boots. So now I have Ubuntu installed, I get a terminal with CTRL-ALT-F1 but I don't know what I need to do now or how to adjust resolution or video settings from command line.

    Read the article

  • Second Monitor "Input Not Supported"

    - by Drew
    I have two identical monitors (new Acer s211hl) with a native resolution of 1920x1080. When enabling dual monitor support in Windows 7, the primary monitor works as expected, but the second monitor says, "Input not Supported" and fails to display anything. If I change the resolution of the second monitor to 1440x900, it works as expected. Likewise, if I set it to 1920x1080 with a refresh rate of 30hz, the monitor displays video. However, neither of these are solutions, because the output looks very blurry, and the content is stretched. I am using the following hardware: Monitors: Acer s211hl Motherboard: Asus F1A75M-Pro CPU/GPU: AMD A8-3850 with integrated Radeon HD 6550D graphics I suspect that there is probably an issue with the integrated graphics or motherboard not being able to output to two 1920x1080 monitors, but I am hoping for official confirmation.

    Read the article

  • Ubuntu 9.10 freezes when HDMI port is connected

    - by Felipe Hummel
    I have a Sony Vaio FW350 with a HDMI output. I'm trying to use it under Ubuntu 9.10 with a LG LCD monitor 21,5'. The laptop has a Intel 4500 video card. I've tried two approaches: Boot the laptop with the HDMI cable connected and monitor turned on. Result: LCD Monitor keeps turned on but the whole screen is black and Ubuntu do not seem to be initializing. Boot Ubuntu until the end. I then connect the HDMI cable into the Laptop. The mouse and the whole system freezes. In both cases the only way to turn off the laptop is holding the power button. I've looked around the internet for similar problems, but only found workarounds for the same problem with VGA input, not HDMI. I also tried to use metacity before connecting the cable, but still got the same result. Any hints?

    Read the article

  • How to make a quiet laptop ? [closed]

    - by psihodelia
    Most modern laptops have very noisy fans. I am looking for a quiet laptop or a small stationary computer which has all its hardware built in a display. Most tasks will be pdf/docs processing, real-time audio processing, web-surfing and skype video chats. Certainly, there is no any fan-less model today; but maybe some of the existed laptops do not switch on their fans so often or implement different solutions? For example, an iPad has no fan at all and it is fast enough for my needs, but it has no normal operating system, so I can't use it for anything but audio chats and web-surfing. Or maybe I can buy a laptop and tweak it to make it absolutely noiseless? Can you recommend me any solution please? Thanks in advance!

    Read the article

  • What motherboard for a Core i7 920 Processor?

    - by jasondavis
    I am wanting to build a really nice PC, price is not to important as I will buy pieces every week or whatever it takes until I get everything I need. I am not a gamer but I would like to watch video and have 3-4 monitors. I do a lot of programming and use a lot of big programs so I would like to go all out and get a lot of Memory, probably at least 12gb but possibly more even as I see many boards support up to 24gb now. Will be using Windows 7. I have decided to go with the Core i7 920 Processor BX80601920. Based on what I posted above, can you please recommend some good motherboards I should look at ? Also some good places to purchase them online. Thanks for any help, tips, etc.

    Read the article

  • Can't set correct desktop resolution on Windows 7 after playing Mirror's Edge

    - by DeadMG
    Ever since I launched Mirror's Edge, my entire system seems to think that my monitor is 1600x1200, when actually it's 1920x1080. The game would only go up to 1600x1200, Windows will only go up to 1600x1200, and even my video drivers will only go up that high. The monitor isn't even that aspect ratio. I've rebooted the system to no effect, and installed the latest graphics drivers for my Radeon 5770, unplugged it and re-plugged it, etc. My secondary screen is still working perfectly correctly. Any suggestions?

    Read the article

  • How do I make my play/pause keyboard button work correctly in iTunes 10 on Windows?

    - by EvilChookie
    First and foremost, I have mmKeys installed correctly. My iTunes works almost perfect while minimized to the tray. My problem is with the play/pause button on my Wireless Comfort Keyboard 5000. When iTunes does not have focus (like it's minimized, or if it isn't the application I'm active in, like right now while typing this) the play pause button toggles twice. So, I'll push the pause button - and the song that is playing will pause, but a split second later will start up again. If the song is paused, and I push play, the song will immediately pause again. In order to get the key to work correctly, I must give iTunes focus, and then push the button. Here's a video I created on youtube: http://www.youtube.com/watch?v=POh6Gbm5QZI OS: Windows 7 x64 iTunes: 10.0.0.68 Intellitype: 8.0 Edit: Apparently I have intellitype 8.0 instead of 7.1

    Read the article

  • Looking for a way execute a task on all files in a directory (recursively) on Windows

    - by stzzz1
    I have a huge number of mp4 video files that needs to have a volume boost. I need a way to execute a ffmpeg audio filter on all files in a specified base directory (and in subdirectories as well). My problem is that I'm working on a Windows computer and I have no knowledge of its shell syntax. I would like to do the equivalent of what this bash script does : TARGET_FILES=$(find /path/to/dir -type f -name *.mp4) for f in $TARGET_FILES do ffmpeg -i $f -af 'volume=4.0' output.$f done I spent quite some time this afternoon looking for a solution but the recursive nature of what I need (that is so simple with find!) isn't too clear. Any help would be greatly appreciated!

    Read the article

  • Evaluate a vendor laptop before deployment to user?

    - by NetWarrior
    I get numerous requests from executives and users for new smaller laptops for travel purposes. Most of my evaluation is based upon whether or not it can run certain applications. Mainly lotus notes, office, and video. Most of the laptops include windows 7 OS, and are fully loaded with ram, a high-end processor and a integrated graphics card. My boss whats me to document the usefulness of the laptop and performance. I'm just a little confused on how to setup a document that can be used by members of the IT department for future evaluations.

    Read the article

  • ATI Radeon 4350 lower resolutions do not fill screen in Windows 7

    - by rlandster
    I have a new Windows 7 64-bit machine with an ATI HD4350 card. The card is connected via VGA (DSUB) to a SyncMaster 205 BW LCD monitor. If I set the resolution to 1680x1050 the LCD screen is completely filled and everything looks fine. But, if I try to set the resolution to 1280x768 (my preferred resolution) only about 2/3 of the monitor screen is used. There are large black bars above and below the image (but not on the sides). I have successfully used this monitor at the 1280x768 resolution for many years without this problem (albeit in Windows XP and a different video card). Can anyone suggest how I can get adjust things so that the entire screen is used at the 1280x768 resolution?

    Read the article

  • Laptop changes resolution when the lid is closed/opened

    - by RedditGuy
    hi i've had a problem for the last couple of days where the resolution on my laptop changes when i close the lid i'm running windows xp professional sp2 on a dell inspiron 1501 the video chip is an ati radeon xpress 1150 according to the catalyst control center software i've got installed which i think came with the drivers or something i've seen this happen before but i installed an old game called road rash a couple days ago after seeing it mentioned on reddit and i'm wondering if it might be related anyone know how i can stop this from happening? i have a workaround where i can manually change the resolution to something else and then change it back but that's a lot of work to do every time i close the laptop which is a lot thanks!

    Read the article

  • Can I use VT-D with a windows host for a VM?

    - by Journeyman Geek
    I've got a fairly beefy gaming system that I also run occational virtual machines on. It runs windows 8 and the built in hyper V virtual machine software at the moment and has a core i7 3770 (which unlike the unlocked model, should support VT-D), an Asus P8Z77V and a gforce 660 video card(also asus). I figure that if I could use VT-D I could add a cheap dedicated 3d card for a VM, in case I wanted somewhat more than the 'basics'. I know KVM and Xen support this to some level on linux, but can I do so on windows? I'm open to switching VM software if need be.

    Read the article

  • Computer refuses to POST

    - by TheX
    Computer refuses to POST. What it will do is the fan spins up, and the lights come on on the motherboard, but other then that it just sits there and laughs in my face! Here is what I have done... I have tried 2 different video cards, both known to work, 4 different sticks of RAM in all four ram slots, 2 processors (known to work), and 2 power supplies (known to work). The only constant is the motherboard... The Motherboard is a Asus m3a3-mvp deluxe. Anyone have any other ideas? Also, I have bread boarded it to make sure there where no shorts (taken everything out of the case and tried again).

    Read the article

  • Laptop Brightness in Gnome and /proc - Thinkpad W510

    - by hakre
    I can set the brightness of my laptop screen already via /proc. I can read and change the value. Now I've set the value to 33 and then I went into gnome power management and enabled the option that it should reduce the backlight brightness being on battery. That works, the screen gets darker. If I now read out the current setting from /proc it still says it's 33. So I assume that there is another node in /proc to be used to control the brightness. The node I use so far is: /proc/acpi/video/VID/LCD0/brightness

    Read the article

  • Viewsonic Monitor Resolution - Drivers are not working

    - by ravidev
    I have Viewsonic va1716w monitor which has VGA/D-SUB video input. I bought new Motherboard Intel DH67GD which has HDMI & DVI output. I connect my motherboard to monitor using DVI to VGA connector. It's working. Yesterday I installed windows 7 OS and also installed monitor drivers(downloaded from viewsonic site - signed version) When i set display resolution to 1440 x 900. It's not setting it.it sets back to 800x600. What should i do to make resolution to 1440x900 (monitor resolution)? DVI to VGA causing this problem or i need to do any trick? Any link to download drivers Please guide me.. Thanks in advance !!

    Read the article

  • 7.0.1 and Photoshop openGL requirements

    - by mcgd
    Hi, I'm running Workstation 7.0.1 on a 64-bit Linux host, with a Vista guest, and the Aero theme works a treat - full marks for getting that working! However, when running Photoshop there are some operations (like interactive image rotation) that seem to require graphics support that VMWare doesn't have - attempting to do these operations returns an error that the functionality "only works with OpenGL enabled windows". It seems that it needs OpenGL 2.0 and Shader Model 3.0 which I gather are supported under Workstation 7 - do I need to put in additional settings of some kind? I've updated to the right version of VMWare Tools, and the video driver is listed as "VMWare SVGA 3D (Microsoft Corporation - WDDM)". I see that in 6.5 there was an option to switch between the beta WDDM driver and the SVGAII driver, but I assume the features of both of these would have been merged into the standard driver in 7.0? Thanks -Matthew

    Read the article

  • rss downloader script

    - by The Digital Ninja
    I have a Synology NAS that is powered by linux at my house. I'm looking to set up a cron script to check a group of rss feeds and auto download new video podcasts to a shared folder. I can do most of the scripting, such as deleting files older than 3 weeks and the wget parts. But I'm not sure how to parse the rss feed and check dates to only grab the latest. I figured its best not to re-invent the wheel and surly someone out there has a command line rss downloader or some such script. Any ideas?

    Read the article

  • suggest AMD machine for software developement [closed]

    - by superb1
    I need a AMD machine (Processor, Motherboard, Ram, HDD ) for software developement .. I will mainly use microsoft visual studio 2010. Operating system would be windows 7 . Suggest decent machine but i dont want to overspend....i guess the rating system of ecommerce websites may help you to suggest !? I want you to suggest from this list : http://www.flipkart.com/computers/components/processor-20246?ref=bae2643a-2cc8-4710-942f-79e7fbc1b416 plz note basic criteria for vs 2010 is 1.6GHz or faster processor 1 GB (32 Bit) Ram 5400 RPM hard disk DirectX 9 capable video card running at 1024 x 768 or higher-resolution

    Read the article

< Previous Page | 302 303 304 305 306 307 308 309 310 311 312 313  | Next Page >